Message ID | 1256905286-25435-19-git-send-email-yamahata@valinux.co.jp |
---|---|
State | New |
Headers | show |
On Fri, Oct 30, 2009 at 09:21:12PM +0900, Isaku Yamahata wrote: > Since It can be retrieved from pci configuration space, > the member is unnecessary. > > Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> > --- > hw/pci.c | 21 ++++++++++----------- > 1 files changed, 10 insertions(+), 11 deletions(-) > > diff --git a/hw/pci.c b/hw/pci.c > index 7da3db9..a75d981 100644 > --- a/hw/pci.c > +++ b/hw/pci.c > @@ -36,7 +36,6 @@ > > struct PCIBus { > BusState qbus; > - int bus_num; > int devfn_min; > pci_set_irq_fn set_irq; > pci_map_irq_fn map_irq; > @@ -192,7 +191,9 @@ static void pci_register_secondary_bus(PCIBus *bus, > > int pci_bus_num(PCIBus *s) > { > - return s->bus_num; > + if (!s->parent_dev) > + return 0; /* pci host bridge */ > + return s->parent_dev->config[PCI_SECONDARY_BUS]; > } > > static int get_pci_config_device(QEMUFile *f, void *pv, size_t size) > @@ -624,7 +625,7 @@ void pci_data_write(void *opaque, uint32_t addr, uint32_t val, int len) > addr, val, len); > #endif > bus_num = (addr >> 16) & 0xff; > - while (s && s->bus_num != bus_num) > + while (s && pci_bus_num(s) != bus_num) > s = s->next; > if (!s) > return; > @@ -645,7 +646,7 @@ uint32_t pci_data_read(void *opaque, uint32_t addr, int len) > uint32_t val; > > bus_num = (addr >> 16) & 0xff; > - while (s && s->bus_num != bus_num) > + while (s && pci_bus_num(s) != bus_num) > s= s->next; > if (!s) > goto fail; > @@ -760,7 +761,8 @@ static void pci_info_device(PCIDevice *d) > const pci_class_desc *desc; > > monitor_printf(mon, " Bus %2d, device %3d, function %d:\n", > - d->bus->bus_num, PCI_SLOT(d->devfn), PCI_FUNC(d->devfn)); > + pci_bus_num(d->bus), > + PCI_SLOT(d->devfn), PCI_FUNC(d->devfn)); > class = pci_get_word(d->config + PCI_CLASS_DEVICE); > monitor_printf(mon, " "); > desc = pci_class_descriptions; > @@ -816,7 +818,7 @@ void pci_for_each_device(int bus_num, void (*fn)(PCIDevice *d)) > PCIDevice *d; > int devfn; > > - while (bus && bus->bus_num != bus_num) > + while (bus && pci_bus_num(bus) != bus_num) > bus = bus->next; > if (bus) { > for(devfn = 0; devfn < 256; devfn++) { > @@ -913,17 +915,14 @@ typedef struct { > static void pci_bridge_write_config(PCIDevice *d, > uint32_t address, uint32_t val, int len) > { > - PCIBridge *s = (PCIBridge *)d; > - > pci_default_write_config(d, address, val, len); > - s->bus.bus_num = d->config[PCI_SECONDARY_BUS]; > } > > PCIBus *pci_find_bus(int bus_num) > { > PCIBus *bus = first_bus; > > - while (bus && bus->bus_num != bus_num) > + while (bus && pci_bus_num(bus) != bus_num) > bus = bus->next; > > return bus; > @@ -1149,7 +1148,7 @@ static void pcibus_dev_print(Monitor *mon, DeviceState *dev, int indent) > monitor_printf(mon, "%*sclass %s, addr %02x:%02x.%x, " > "pci id %04x:%04x (sub %04x:%04x)\n", > indent, "", ctxt, > - d->bus->bus_num, PCI_SLOT(d->devfn), PCI_FUNC(d->devfn), > + pci_bus_num(d->bus), PCI_SLOT(d->devfn), PCI_FUNC(d->devfn), > pci_get_word(d->config + PCI_VENDOR_ID), > pci_get_word(d->config + PCI_DEVICE_ID), > pci_get_word(d->config + PCI_SUBSYSTEM_VENDOR_ID), > -- > 1.6.0.2
On Fri, Oct 30, 2009 at 09:21:12PM +0900, Isaku Yamahata wrote: > Since It can be retrieved from pci configuration space, > the member is unnecessary. > > Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> > --- > hw/pci.c | 21 ++++++++++----------- > 1 files changed, 10 insertions(+), 11 deletions(-) > > diff --git a/hw/pci.c b/hw/pci.c > index 7da3db9..a75d981 100644 > --- a/hw/pci.c > +++ b/hw/pci.c > @@ -36,7 +36,6 @@ > > struct PCIBus { > BusState qbus; > - int bus_num; > int devfn_min; > pci_set_irq_fn set_irq; > pci_map_irq_fn map_irq; > @@ -192,7 +191,9 @@ static void pci_register_secondary_bus(PCIBus *bus, > > int pci_bus_num(PCIBus *s) > { > - return s->bus_num; > + if (!s->parent_dev) > + return 0; /* pci host bridge */ > + return s->parent_dev->config[PCI_SECONDARY_BUS]; > } > > static int get_pci_config_device(QEMUFile *f, void *pv, size_t size) > @@ -624,7 +625,7 @@ void pci_data_write(void *opaque, uint32_t addr, uint32_t val, int len) > addr, val, len); > #endif > bus_num = (addr >> 16) & 0xff; > - while (s && s->bus_num != bus_num) > + while (s && pci_bus_num(s) != bus_num) > s = s->next; > if (!s) > return; > @@ -645,7 +646,7 @@ uint32_t pci_data_read(void *opaque, uint32_t addr, int len) > uint32_t val; > > bus_num = (addr >> 16) & 0xff; > - while (s && s->bus_num != bus_num) > + while (s && pci_bus_num(s) != bus_num) > s= s->next; > if (!s) > goto fail; > @@ -760,7 +761,8 @@ static void pci_info_device(PCIDevice *d) > const pci_class_desc *desc; > > monitor_printf(mon, " Bus %2d, device %3d, function %d:\n", > - d->bus->bus_num, PCI_SLOT(d->devfn), PCI_FUNC(d->devfn)); > + pci_bus_num(d->bus), > + PCI_SLOT(d->devfn), PCI_FUNC(d->devfn)); > class = pci_get_word(d->config + PCI_CLASS_DEVICE); > monitor_printf(mon, " "); > desc = pci_class_descriptions; > @@ -816,7 +818,7 @@ void pci_for_each_device(int bus_num, void (*fn)(PCIDevice *d)) > PCIDevice *d; > int devfn; > > - while (bus && bus->bus_num != bus_num) > + while (bus && pci_bus_num(bus) != bus_num) > bus = bus->next; > if (bus) { > for(devfn = 0; devfn < 256; devfn++) { > @@ -913,17 +915,14 @@ typedef struct { > static void pci_bridge_write_config(PCIDevice *d, > uint32_t address, uint32_t val, int len) > { > - PCIBridge *s = (PCIBridge *)d; > - > pci_default_write_config(d, address, val, len); > - s->bus.bus_num = d->config[PCI_SECONDARY_BUS]; > } > > PCIBus *pci_find_bus(int bus_num) > { > PCIBus *bus = first_bus; > > - while (bus && bus->bus_num != bus_num) > + while (bus && pci_bus_num(bus) != bus_num) > bus = bus->next; > > return bus; > @@ -1149,7 +1148,7 @@ static void pcibus_dev_print(Monitor *mon, DeviceState *dev, int indent) > monitor_printf(mon, "%*sclass %s, addr %02x:%02x.%x, " > "pci id %04x:%04x (sub %04x:%04x)\n", > indent, "", ctxt, > - d->bus->bus_num, PCI_SLOT(d->devfn), PCI_FUNC(d->devfn), > + pci_bus_num(d->bus), PCI_SLOT(d->devfn), PCI_FUNC(d->devfn), > pci_get_word(d->config + PCI_VENDOR_ID), > pci_get_word(d->config + PCI_DEVICE_ID), > pci_get_word(d->config + PCI_SUBSYSTEM_VENDOR_ID), > -- > 1.6.0.2 > >
On Tue, Nov 10, 2009 at 05:33:22PM +0200, Michael S. Tsirkin wrote: > On Fri, Oct 30, 2009 at 09:21:12PM +0900, Isaku Yamahata wrote: > > Since It can be retrieved from pci configuration space, > > the member is unnecessary. > > > > Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> > > Acked-by: Michael S. Tsirkin <mst@redhat.com> Sorry, wait a second please: > > --- > > hw/pci.c | 21 ++++++++++----------- > > 1 files changed, 10 insertions(+), 11 deletions(-) > > > > diff --git a/hw/pci.c b/hw/pci.c > > index 7da3db9..a75d981 100644 > > --- a/hw/pci.c > > +++ b/hw/pci.c > > @@ -36,7 +36,6 @@ > > > > struct PCIBus { > > BusState qbus; > > - int bus_num; > > int devfn_min; > > pci_set_irq_fn set_irq; > > pci_map_irq_fn map_irq; > > @@ -192,7 +191,9 @@ static void pci_register_secondary_bus(PCIBus *bus, > > > > int pci_bus_num(PCIBus *s) > > { > > - return s->bus_num; > > + if (!s->parent_dev) > > + return 0; /* pci host bridge */ > > + return s->parent_dev->config[PCI_SECONDARY_BUS]; Why are you using the value from the *parent*? Because originally ... > > } > > > > static int get_pci_config_device(QEMUFile *f, void *pv, size_t size) > > @@ -624,7 +625,7 @@ void pci_data_write(void *opaque, uint32_t addr, uint32_t val, int len) > > addr, val, len); > > #endif > > bus_num = (addr >> 16) & 0xff; > > - while (s && s->bus_num != bus_num) > > + while (s && pci_bus_num(s) != bus_num) > > s = s->next; > > if (!s) > > return; > > @@ -645,7 +646,7 @@ uint32_t pci_data_read(void *opaque, uint32_t addr, int len) > > uint32_t val; > > > > bus_num = (addr >> 16) & 0xff; > > - while (s && s->bus_num != bus_num) > > + while (s && pci_bus_num(s) != bus_num) > > s= s->next; > > if (!s) > > goto fail; > > @@ -760,7 +761,8 @@ static void pci_info_device(PCIDevice *d) > > const pci_class_desc *desc; > > > > monitor_printf(mon, " Bus %2d, device %3d, function %d:\n", > > - d->bus->bus_num, PCI_SLOT(d->devfn), PCI_FUNC(d->devfn)); > > + pci_bus_num(d->bus), > > + PCI_SLOT(d->devfn), PCI_FUNC(d->devfn)); > > class = pci_get_word(d->config + PCI_CLASS_DEVICE); > > monitor_printf(mon, " "); > > desc = pci_class_descriptions; > > @@ -816,7 +818,7 @@ void pci_for_each_device(int bus_num, void (*fn)(PCIDevice *d)) > > PCIDevice *d; > > int devfn; > > > > - while (bus && bus->bus_num != bus_num) > > + while (bus && pci_bus_num(bus) != bus_num) > > bus = bus->next; > > if (bus) { > > for(devfn = 0; devfn < 256; devfn++) { > > @@ -913,17 +915,14 @@ typedef struct { > > static void pci_bridge_write_config(PCIDevice *d, > > uint32_t address, uint32_t val, int len) > > { > > - PCIBridge *s = (PCIBridge *)d; > > - > > pci_default_write_config(d, address, val, len); > > - s->bus.bus_num = d->config[PCI_SECONDARY_BUS]; ... bus number used to equal PCI_SECONDARY_BUS for the *same* device. > > } > > > > PCIBus *pci_find_bus(int bus_num) > > { > > PCIBus *bus = first_bus; > > > > - while (bus && bus->bus_num != bus_num) > > + while (bus && pci_bus_num(bus) != bus_num) > > bus = bus->next; > > > > return bus; > > @@ -1149,7 +1148,7 @@ static void pcibus_dev_print(Monitor *mon, DeviceState *dev, int indent) > > monitor_printf(mon, "%*sclass %s, addr %02x:%02x.%x, " > > "pci id %04x:%04x (sub %04x:%04x)\n", > > indent, "", ctxt, > > - d->bus->bus_num, PCI_SLOT(d->devfn), PCI_FUNC(d->devfn), > > + pci_bus_num(d->bus), PCI_SLOT(d->devfn), PCI_FUNC(d->devfn), > > pci_get_word(d->config + PCI_VENDOR_ID), > > pci_get_word(d->config + PCI_DEVICE_ID), > > pci_get_word(d->config + PCI_SUBSYSTEM_VENDOR_ID), > > -- > > 1.6.0.2 > > > >
On Tue, Nov 10, 2009 at 05:46:40PM +0200, Michael S. Tsirkin wrote: > On Tue, Nov 10, 2009 at 05:33:22PM +0200, Michael S. Tsirkin wrote: > > On Fri, Oct 30, 2009 at 09:21:12PM +0900, Isaku Yamahata wrote: > > > Since It can be retrieved from pci configuration space, > > > the member is unnecessary. > > > > > > Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> > > > > Acked-by: Michael S. Tsirkin <mst@redhat.com> > > Sorry, wait a second please: > > > > --- > > > hw/pci.c | 21 ++++++++++----------- > > > 1 files changed, 10 insertions(+), 11 deletions(-) > > > > > > diff --git a/hw/pci.c b/hw/pci.c > > > index 7da3db9..a75d981 100644 > > > --- a/hw/pci.c > > > +++ b/hw/pci.c > > > @@ -36,7 +36,6 @@ > > > > > > struct PCIBus { > > > BusState qbus; > > > - int bus_num; > > > int devfn_min; > > > pci_set_irq_fn set_irq; > > > pci_map_irq_fn map_irq; > > > @@ -192,7 +191,9 @@ static void pci_register_secondary_bus(PCIBus *bus, > > > > > > int pci_bus_num(PCIBus *s) > > > { > > > - return s->bus_num; > > > + if (!s->parent_dev) > > > + return 0; /* pci host bridge */ > > > + return s->parent_dev->config[PCI_SECONDARY_BUS]; > > Why are you using the value from the *parent*? > Because originally ... You seem to be confuging PCIBus with PCIBridge. "s" here is PCIBus. "s" in pci_brdige_write_config() is PCIBrdige. And both PCIBridge and PCIDevice have bus member, so it's more confusing. NULL ^ | PCIBus::parent_dev | PCIBus (pci host bridge) includes devices[256] ^ | PCIDevice::bus | PCIBridge includes PCIDevice | ^ PCIBridge::bus| | PCIBus::parent_dev v | PCIBus thanks, > > } > > > > > > static int get_pci_config_device(QEMUFile *f, void *pv, size_t size) > > > @@ -624,7 +625,7 @@ void pci_data_write(void *opaque, uint32_t addr, uint32_t val, int len) > > > addr, val, len); > > > #endif > > > bus_num = (addr >> 16) & 0xff; > > > - while (s && s->bus_num != bus_num) > > > + while (s && pci_bus_num(s) != bus_num) > > > s = s->next; > > > if (!s) > > > return; > > > @@ -645,7 +646,7 @@ uint32_t pci_data_read(void *opaque, uint32_t addr, int len) > > > uint32_t val; > > > > > > bus_num = (addr >> 16) & 0xff; > > > - while (s && s->bus_num != bus_num) > > > + while (s && pci_bus_num(s) != bus_num) > > > s= s->next; > > > if (!s) > > > goto fail; > > > @@ -760,7 +761,8 @@ static void pci_info_device(PCIDevice *d) > > > const pci_class_desc *desc; > > > > > > monitor_printf(mon, " Bus %2d, device %3d, function %d:\n", > > > - d->bus->bus_num, PCI_SLOT(d->devfn), PCI_FUNC(d->devfn)); > > > + pci_bus_num(d->bus), > > > + PCI_SLOT(d->devfn), PCI_FUNC(d->devfn)); > > > class = pci_get_word(d->config + PCI_CLASS_DEVICE); > > > monitor_printf(mon, " "); > > > desc = pci_class_descriptions; > > > @@ -816,7 +818,7 @@ void pci_for_each_device(int bus_num, void (*fn)(PCIDevice *d)) > > > PCIDevice *d; > > > int devfn; > > > > > > - while (bus && bus->bus_num != bus_num) > > > + while (bus && pci_bus_num(bus) != bus_num) > > > bus = bus->next; > > > if (bus) { > > > for(devfn = 0; devfn < 256; devfn++) { > > > @@ -913,17 +915,14 @@ typedef struct { > > > static void pci_bridge_write_config(PCIDevice *d, > > > uint32_t address, uint32_t val, int len) > > > { > > > - PCIBridge *s = (PCIBridge *)d; > > > - > > > pci_default_write_config(d, address, val, len); > > > - s->bus.bus_num = d->config[PCI_SECONDARY_BUS]; > > ... bus number used to equal PCI_SECONDARY_BUS for the *same* device. > > > > } > > > > > > PCIBus *pci_find_bus(int bus_num) > > > { > > > PCIBus *bus = first_bus; > > > > > > - while (bus && bus->bus_num != bus_num) > > > + while (bus && pci_bus_num(bus) != bus_num) > > > bus = bus->next; > > > > > > return bus; > > > @@ -1149,7 +1148,7 @@ static void pcibus_dev_print(Monitor *mon, DeviceState *dev, int indent) > > > monitor_printf(mon, "%*sclass %s, addr %02x:%02x.%x, " > > > "pci id %04x:%04x (sub %04x:%04x)\n", > > > indent, "", ctxt, > > > - d->bus->bus_num, PCI_SLOT(d->devfn), PCI_FUNC(d->devfn), > > > + pci_bus_num(d->bus), PCI_SLOT(d->devfn), PCI_FUNC(d->devfn), > > > pci_get_word(d->config + PCI_VENDOR_ID), > > > pci_get_word(d->config + PCI_DEVICE_ID), > > > pci_get_word(d->config + PCI_SUBSYSTEM_VENDOR_ID), >
diff --git a/hw/pci.c b/hw/pci.c index 7da3db9..a75d981 100644 --- a/hw/pci.c +++ b/hw/pci.c @@ -36,7 +36,6 @@ struct PCIBus { BusState qbus; - int bus_num; int devfn_min; pci_set_irq_fn set_irq; pci_map_irq_fn map_irq; @@ -192,7 +191,9 @@ static void pci_register_secondary_bus(PCIBus *bus, int pci_bus_num(PCIBus *s) { - return s->bus_num; + if (!s->parent_dev) + return 0; /* pci host bridge */ + return s->parent_dev->config[PCI_SECONDARY_BUS]; } static int get_pci_config_device(QEMUFile *f, void *pv, size_t size) @@ -624,7 +625,7 @@ void pci_data_write(void *opaque, uint32_t addr, uint32_t val, int len) addr, val, len); #endif bus_num = (addr >> 16) & 0xff; - while (s && s->bus_num != bus_num) + while (s && pci_bus_num(s) != bus_num) s = s->next; if (!s) return; @@ -645,7 +646,7 @@ uint32_t pci_data_read(void *opaque, uint32_t addr, int len) uint32_t val; bus_num = (addr >> 16) & 0xff; - while (s && s->bus_num != bus_num) + while (s && pci_bus_num(s) != bus_num) s= s->next; if (!s) goto fail; @@ -760,7 +761,8 @@ static void pci_info_device(PCIDevice *d) const pci_class_desc *desc; monitor_printf(mon, " Bus %2d, device %3d, function %d:\n", - d->bus->bus_num, PCI_SLOT(d->devfn), PCI_FUNC(d->devfn)); + pci_bus_num(d->bus), + PCI_SLOT(d->devfn), PCI_FUNC(d->devfn)); class = pci_get_word(d->config + PCI_CLASS_DEVICE); monitor_printf(mon, " "); desc = pci_class_descriptions; @@ -816,7 +818,7 @@ void pci_for_each_device(int bus_num, void (*fn)(PCIDevice *d)) PCIDevice *d; int devfn; - while (bus && bus->bus_num != bus_num) + while (bus && pci_bus_num(bus) != bus_num) bus = bus->next; if (bus) { for(devfn = 0; devfn < 256; devfn++) { @@ -913,17 +915,14 @@ typedef struct { static void pci_bridge_write_config(PCIDevice *d, uint32_t address, uint32_t val, int len) { - PCIBridge *s = (PCIBridge *)d; - pci_default_write_config(d, address, val, len); - s->bus.bus_num = d->config[PCI_SECONDARY_BUS]; } PCIBus *pci_find_bus(int bus_num) { PCIBus *bus = first_bus; - while (bus && bus->bus_num != bus_num) + while (bus && pci_bus_num(bus) != bus_num) bus = bus->next; return bus; @@ -1149,7 +1148,7 @@ static void pcibus_dev_print(Monitor *mon, DeviceState *dev, int indent) monitor_printf(mon, "%*sclass %s, addr %02x:%02x.%x, " "pci id %04x:%04x (sub %04x:%04x)\n", indent, "", ctxt, - d->bus->bus_num, PCI_SLOT(d->devfn), PCI_FUNC(d->devfn), + pci_bus_num(d->bus), PCI_SLOT(d->devfn), PCI_FUNC(d->devfn), pci_get_word(d->config + PCI_VENDOR_ID), pci_get_word(d->config + PCI_DEVICE_ID), pci_get_word(d->config + PCI_SUBSYSTEM_VENDOR_ID),
Since It can be retrieved from pci configuration space, the member is unnecessary. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> --- hw/pci.c | 21 ++++++++++----------- 1 files changed, 10 insertions(+), 11 deletions(-)