Message ID | 1385557363-25756-1-git-send-email-vasilis.liaskovitis@profitbricks.com |
---|---|
State | New |
Headers | show |
On Wed, 27 Nov 2013 14:02:43 +0100 Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> wrote: > This patch adds a _PXM method to ACPI CPU objects for the pc machine. The _PXM > value is derived from the passed in guest info, same way as CPU SRAT entries. > > Currently, CPU SRAT entries are only enabled for cpus that are already present > in the system. The SRAT entries for hotpluggable processors are disabled (flags > bit 0 set to 0 in hw/i385/acpi-build.c:build_srat). Section 5.2.16.1 of ACPI > spec mentions "If the Local APIC ID of a dynamically added processor is not > present in the SRAT, a _PXM object must exist for the processor’s device or one > of its ancestors in the ACPI Namespace." Since SRAT entries are not available > for the hot-pluggable processors, a _PXM method must exist for them. Otherwise, > the CPU is hot-added in the wrong NUMA node (default node 0). > > Even if CPU SRAT entries are enabled, _PXM method is what the linux kernel > consults on hot-add time. Section 17.2.1 of ACPI spec mentions " OSPM will > consume the SRAT only at boot time. OSPM should use _PXM for any devices that > are hot-added into the system after boot up." To be more precise if SRAT > information is available to the guest kernel, it is used. However, parsed SRAT > info is reset and lost after hot-remove operations, see kernel commit c4c60524. > This means that on a hot-unplug / hot-replug scenario, and without a _PXM > method, the kernel may put a CPU on different nodes because SRAT info has been > reset by a previous hot-remove operation. > > The above hot-remove/hot-add scenario has been tested on master, plus cpu-del > patches from: > https://lists.gnu.org/archive/html/qemu-devel/2013-10/msg01085.html > With the curret _PXM patch, hot-added CPUs are always placed into the correct > NUMA node, regardless of kernel behaviour. > > v1->v2: > Make method return a DWORD integer > Tested on qemu master + cpu-del patches > > Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> > Reviewed-by: Thilo Fromm <t-lo@thilo-fromm.de> Patch looks good, Please add patch to update hw/i386/ssdt-proc.hex.generated for hosts without iasl for completness > > --- > hw/i386/acpi-build.c | 5 +++++ > hw/i386/ssdt-proc.dsl | 5 +++++ > 2 files changed, 10 insertions(+) > > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c > index d089e1e..3c11ddc 100644 > --- a/hw/i386/acpi-build.c > +++ b/hw/i386/acpi-build.c > @@ -603,6 +603,7 @@ static inline char acpi_get_hex(uint32_t val) > #define ACPI_PROC_OFFSET_CPUHEX (*ssdt_proc_name - *ssdt_proc_start + 2) > #define ACPI_PROC_OFFSET_CPUID1 (*ssdt_proc_name - *ssdt_proc_start + 4) > #define ACPI_PROC_OFFSET_CPUID2 (*ssdt_proc_id - *ssdt_proc_start) > +#define ACPI_PROC_OFFSET_CPUPXM (*ssdt_proc_pxm - *ssdt_proc_start) > #define ACPI_PROC_SIZEOF (*ssdt_proc_end - *ssdt_proc_start) > #define ACPI_PROC_AML (ssdp_proc_aml + *ssdt_proc_start) > > @@ -724,6 +725,10 @@ build_ssdt(GArray *table_data, GArray *linker, > proc[ACPI_PROC_OFFSET_CPUHEX+1] = acpi_get_hex(i); > proc[ACPI_PROC_OFFSET_CPUID1] = i; > proc[ACPI_PROC_OFFSET_CPUID2] = i; > + proc[ACPI_PROC_OFFSET_CPUPXM] = guest_info->node_cpu[i]; > + proc[ACPI_PROC_OFFSET_CPUPXM + 1] = 0; > + proc[ACPI_PROC_OFFSET_CPUPXM + 2] = 0; > + proc[ACPI_PROC_OFFSET_CPUPXM + 3] = 0; > } > > /* build this code: > diff --git a/hw/i386/ssdt-proc.dsl b/hw/i386/ssdt-proc.dsl > index 8229bfd..8d4c5bf 100644 > --- a/hw/i386/ssdt-proc.dsl > +++ b/hw/i386/ssdt-proc.dsl > @@ -47,6 +47,8 @@ DefinitionBlock ("ssdt-proc.aml", "SSDT", 0x01, "BXPC", "BXSSDT", 0x1) > * also updating the C code. > */ > Name(_HID, "ACPI0007") > + ACPI_EXTRACT_NAME_DWORD_CONST ssdt_proc_pxm > + Name(PXM, 0xAAAAAAAA) > External(CPMA, MethodObj) > External(CPST, MethodObj) > External(CPEJ, MethodObj) > @@ -59,5 +61,8 @@ DefinitionBlock ("ssdt-proc.aml", "SSDT", 0x01, "BXPC", "BXSSDT", 0x1) > Method(_EJ0, 1, NotSerialized) { > CPEJ(ID, Arg0) > } > + Method(_PXM, 0) { > + Return (PXM) > + } > } > }
Il 27/11/2013 16:53, Igor Mammedov ha scritto: > Patch looks good, > Please add patch to update hw/i386/ssdt-proc.hex.generated for hosts without iasl > for completness Also please rename PXM to CPXM or CPPX for consistency. Paolo >> > >> > --- >> > hw/i386/acpi-build.c | 5 +++++ >> > hw/i386/ssdt-proc.dsl | 5 +++++ >> > 2 files changed, 10 insertions(+) >> > >> > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c >> > index d089e1e..3c11ddc 100644 >> > --- a/hw/i386/acpi-build.c >> > +++ b/hw/i386/acpi-build.c >> > @@ -603,6 +603,7 @@ static inline char acpi_get_hex(uint32_t val) >> > #define ACPI_PROC_OFFSET_CPUHEX (*ssdt_proc_name - *ssdt_proc_start + 2) >> > #define ACPI_PROC_OFFSET_CPUID1 (*ssdt_proc_name - *ssdt_proc_start + 4) >> > #define ACPI_PROC_OFFSET_CPUID2 (*ssdt_proc_id - *ssdt_proc_start) >> > +#define ACPI_PROC_OFFSET_CPUPXM (*ssdt_proc_pxm - *ssdt_proc_start) >> > #define ACPI_PROC_SIZEOF (*ssdt_proc_end - *ssdt_proc_start) >> > #define ACPI_PROC_AML (ssdp_proc_aml + *ssdt_proc_start) >> > >> > @@ -724,6 +725,10 @@ build_ssdt(GArray *table_data, GArray *linker, >> > proc[ACPI_PROC_OFFSET_CPUHEX+1] = acpi_get_hex(i); >> > proc[ACPI_PROC_OFFSET_CPUID1] = i; >> > proc[ACPI_PROC_OFFSET_CPUID2] = i; >> > + proc[ACPI_PROC_OFFSET_CPUPXM] = guest_info->node_cpu[i]; >> > + proc[ACPI_PROC_OFFSET_CPUPXM + 1] = 0; >> > + proc[ACPI_PROC_OFFSET_CPUPXM + 2] = 0; >> > + proc[ACPI_PROC_OFFSET_CPUPXM + 3] = 0; >> > } >> > >> > /* build this code: >> > diff --git a/hw/i386/ssdt-proc.dsl b/hw/i386/ssdt-proc.dsl >> > index 8229bfd..8d4c5bf 100644 >> > --- a/hw/i386/ssdt-proc.dsl >> > +++ b/hw/i386/ssdt-proc.dsl >> > @@ -47,6 +47,8 @@ DefinitionBlock ("ssdt-proc.aml", "SSDT", 0x01, "BXPC", "BXSSDT", 0x1) >> > * also updating the C code. >> > */ >> > Name(_HID, "ACPI0007") >> > + ACPI_EXTRACT_NAME_DWORD_CONST ssdt_proc_pxm >> > + Name(PXM, 0xAAAAAAAA) >> > External(CPMA, MethodObj) >> > External(CPST, MethodObj) >> > External(CPEJ, MethodObj) >> > @@ -59,5 +61,8 @@ DefinitionBlock ("ssdt-proc.aml", "SSDT", 0x01, "BXPC", "BXSSDT", 0x1) >> > Method(_EJ0, 1, NotSerialized) { >> > CPEJ(ID, Arg0) >> > } >> > + Method(_PXM, 0) { >> > + Return (PXM) >> > + } >> > }
On Wed, Nov 27, 2013 at 04:58:51PM +0100, Paolo Bonzini wrote: > Il 27/11/2013 16:53, Igor Mammedov ha scritto: > > Patch looks good, > > Please add patch to update hw/i386/ssdt-proc.hex.generated for hosts without iasl > > for completness > > Also please rename PXM to CPXM or CPPX for consistency. I posted an updated version of the patch on the list, also here: http://patchwork.ozlabs.org/patch/294636/ thanks, - Vasilis
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c index d089e1e..3c11ddc 100644 --- a/hw/i386/acpi-build.c +++ b/hw/i386/acpi-build.c @@ -603,6 +603,7 @@ static inline char acpi_get_hex(uint32_t val) #define ACPI_PROC_OFFSET_CPUHEX (*ssdt_proc_name - *ssdt_proc_start + 2) #define ACPI_PROC_OFFSET_CPUID1 (*ssdt_proc_name - *ssdt_proc_start + 4) #define ACPI_PROC_OFFSET_CPUID2 (*ssdt_proc_id - *ssdt_proc_start) +#define ACPI_PROC_OFFSET_CPUPXM (*ssdt_proc_pxm - *ssdt_proc_start) #define ACPI_PROC_SIZEOF (*ssdt_proc_end - *ssdt_proc_start) #define ACPI_PROC_AML (ssdp_proc_aml + *ssdt_proc_start) @@ -724,6 +725,10 @@ build_ssdt(GArray *table_data, GArray *linker, proc[ACPI_PROC_OFFSET_CPUHEX+1] = acpi_get_hex(i); proc[ACPI_PROC_OFFSET_CPUID1] = i; proc[ACPI_PROC_OFFSET_CPUID2] = i; + proc[ACPI_PROC_OFFSET_CPUPXM] = guest_info->node_cpu[i]; + proc[ACPI_PROC_OFFSET_CPUPXM + 1] = 0; + proc[ACPI_PROC_OFFSET_CPUPXM + 2] = 0; + proc[ACPI_PROC_OFFSET_CPUPXM + 3] = 0; } /* build this code: diff --git a/hw/i386/ssdt-proc.dsl b/hw/i386/ssdt-proc.dsl index 8229bfd..8d4c5bf 100644 --- a/hw/i386/ssdt-proc.dsl +++ b/hw/i386/ssdt-proc.dsl @@ -47,6 +47,8 @@ DefinitionBlock ("ssdt-proc.aml", "SSDT", 0x01, "BXPC", "BXSSDT", 0x1) * also updating the C code. */ Name(_HID, "ACPI0007") + ACPI_EXTRACT_NAME_DWORD_CONST ssdt_proc_pxm + Name(PXM, 0xAAAAAAAA) External(CPMA, MethodObj) External(CPST, MethodObj) External(CPEJ, MethodObj) @@ -59,5 +61,8 @@ DefinitionBlock ("ssdt-proc.aml", "SSDT", 0x01, "BXPC", "BXSSDT", 0x1) Method(_EJ0, 1, NotSerialized) { CPEJ(ID, Arg0) } + Method(_PXM, 0) { + Return (PXM) + } } }