Message ID | 1366084439-7475-1-git-send-email-lig.fnst@cn.fujitsu.com |
---|---|
State | New |
Headers | show |
ping ... 在 2013-04-16二的 11:53 +0800,liguang写道: > when use DEBUG_DEBUGCON, screen spits: > debugcon: write addr=0x0000 val=0x00 > Rdebugcon: write addr=0x0000 val=0x00 > udebugcon: write addr=0x0000 val=0x00 > ndebugcon: write addr=0x0000 val=0x00 > ndebugcon: write addr=0x0000 val=0x00 > idebugcon: write addr=0x0000 val=0x00 > ndebugcon: write addr=0x0000 val=0x00 > gdebugcon: write addr=0x0000 val=0x00 > debugcon: write addr=0x0000 val=0x00 > odebugcon: write addr=0x0000 val=0x00 > pdebugcon: write addr=0x0000 val=0x00 > tdebugcon: write addr=0x0000 val=0x00 > idebugcon: write addr=0x0000 val=0x00 > odebugcon: write addr=0x0000 val=0x00 > ndebugcon: write addr=0x0000 val=0x00 > debugcon: write addr=0x0000 val=0x00 > rdebugcon: write addr=0x0000 val=0x00 > odebugcon: write addr=0x0000 val=0x00 > mdebugcon: write addr=0x0000 val=0x00 > debugcon: write addr=0x0000 val=0x00 > adebugcon: write addr=0x0000 val=0x00 > tdebugcon: write addr=0x0000 val=0x00 > debugcon: write addr=0x0000 val=0x00 > > Oh, that's wrong, val is not always be 0. > this bug caused by lack of length modifier > for specifier 'x'. > > Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> > --- > hw/char/debugcon.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/hw/char/debugcon.c b/hw/char/debugcon.c > index 0588eeb..44c93e1 100644 > --- a/hw/char/debugcon.c > +++ b/hw/char/debugcon.c > @@ -55,7 +55,7 @@ static void debugcon_ioport_write(void *opaque, hwaddr addr, uint64_t val, > unsigned char ch = val; > > #ifdef DEBUG_DEBUGCON > - printf("debugcon: write addr=0x%04x val=0x%02x\n", addr, val); > + printf("debugcon: write addr=0x%04" HWADDR_PRIx " val=0x%02x\n", addr, val); > #endif > > qemu_chr_fe_write(s->chr, &ch, 1);
ping ... again. 在 2013-04-22一的 14:18 +0800,li guang写道: > ping ... > > 在 2013-04-16二的 11:53 +0800,liguang写道: > > when use DEBUG_DEBUGCON, screen spits: > > debugcon: write addr=0x0000 val=0x00 > > Rdebugcon: write addr=0x0000 val=0x00 > > udebugcon: write addr=0x0000 val=0x00 > > ndebugcon: write addr=0x0000 val=0x00 > > ndebugcon: write addr=0x0000 val=0x00 > > idebugcon: write addr=0x0000 val=0x00 > > ndebugcon: write addr=0x0000 val=0x00 > > gdebugcon: write addr=0x0000 val=0x00 > > debugcon: write addr=0x0000 val=0x00 > > odebugcon: write addr=0x0000 val=0x00 > > pdebugcon: write addr=0x0000 val=0x00 > > tdebugcon: write addr=0x0000 val=0x00 > > idebugcon: write addr=0x0000 val=0x00 > > odebugcon: write addr=0x0000 val=0x00 > > ndebugcon: write addr=0x0000 val=0x00 > > debugcon: write addr=0x0000 val=0x00 > > rdebugcon: write addr=0x0000 val=0x00 > > odebugcon: write addr=0x0000 val=0x00 > > mdebugcon: write addr=0x0000 val=0x00 > > debugcon: write addr=0x0000 val=0x00 > > adebugcon: write addr=0x0000 val=0x00 > > tdebugcon: write addr=0x0000 val=0x00 > > debugcon: write addr=0x0000 val=0x00 > > > > Oh, that's wrong, val is not always be 0. > > this bug caused by lack of length modifier > > for specifier 'x'. > > > > Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> > > --- > > hw/char/debugcon.c | 2 +- > > 1 files changed, 1 insertions(+), 1 deletions(-) > > > > diff --git a/hw/char/debugcon.c b/hw/char/debugcon.c > > index 0588eeb..44c93e1 100644 > > --- a/hw/char/debugcon.c > > +++ b/hw/char/debugcon.c > > @@ -55,7 +55,7 @@ static void debugcon_ioport_write(void *opaque, hwaddr addr, uint64_t val, > > unsigned char ch = val; > > > > #ifdef DEBUG_DEBUGCON > > - printf("debugcon: write addr=0x%04x val=0x%02x\n", addr, val); > > + printf("debugcon: write addr=0x%04" HWADDR_PRIx " val=0x%02x\n", addr, val); > > #endif > > > > qemu_chr_fe_write(s->chr, &ch, 1); > > >
Cc'ing qemu-trivial. liguang <lig.fnst@cn.fujitsu.com> writes: > when use DEBUG_DEBUGCON, screen spits: > debugcon: write addr=0x0000 val=0x00 > Rdebugcon: write addr=0x0000 val=0x00 > udebugcon: write addr=0x0000 val=0x00 > ndebugcon: write addr=0x0000 val=0x00 > ndebugcon: write addr=0x0000 val=0x00 > idebugcon: write addr=0x0000 val=0x00 > ndebugcon: write addr=0x0000 val=0x00 > gdebugcon: write addr=0x0000 val=0x00 > debugcon: write addr=0x0000 val=0x00 > odebugcon: write addr=0x0000 val=0x00 > pdebugcon: write addr=0x0000 val=0x00 > tdebugcon: write addr=0x0000 val=0x00 > idebugcon: write addr=0x0000 val=0x00 > odebugcon: write addr=0x0000 val=0x00 > ndebugcon: write addr=0x0000 val=0x00 > debugcon: write addr=0x0000 val=0x00 > rdebugcon: write addr=0x0000 val=0x00 > odebugcon: write addr=0x0000 val=0x00 > mdebugcon: write addr=0x0000 val=0x00 > debugcon: write addr=0x0000 val=0x00 > adebugcon: write addr=0x0000 val=0x00 > tdebugcon: write addr=0x0000 val=0x00 > debugcon: write addr=0x0000 val=0x00 > > Oh, that's wrong, val is not always be 0. > this bug caused by lack of length modifier > for specifier 'x'. Subject is misleading, it doesn't "always print", only when DEBUG_DEBUGCON is enabled. Recommend to abridge the commit message radically. > Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> > --- > hw/char/debugcon.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/hw/char/debugcon.c b/hw/char/debugcon.c > index 0588eeb..44c93e1 100644 > --- a/hw/char/debugcon.c > +++ b/hw/char/debugcon.c > @@ -55,7 +55,7 @@ static void debugcon_ioport_write(void *opaque, hwaddr addr, uint64_t val, > unsigned char ch = val; > > #ifdef DEBUG_DEBUGCON > - printf("debugcon: write addr=0x%04x val=0x%02x\n", addr, val); > + printf("debugcon: write addr=0x%04" HWADDR_PRIx " val=0x%02x\n", addr, val); > #endif > > qemu_chr_fe_write(s->chr, &ch, 1);
在 2013-05-23四的 08:25 +0200,Markus Armbruster写道: > Cc'ing qemu-trivial. > > liguang <lig.fnst@cn.fujitsu.com> writes: > > > when use DEBUG_DEBUGCON, screen spits: > > debugcon: write addr=0x0000 val=0x00 > > Rdebugcon: write addr=0x0000 val=0x00 > > udebugcon: write addr=0x0000 val=0x00 > > ndebugcon: write addr=0x0000 val=0x00 > > ndebugcon: write addr=0x0000 val=0x00 > > idebugcon: write addr=0x0000 val=0x00 > > ndebugcon: write addr=0x0000 val=0x00 > > gdebugcon: write addr=0x0000 val=0x00 > > debugcon: write addr=0x0000 val=0x00 > > odebugcon: write addr=0x0000 val=0x00 > > pdebugcon: write addr=0x0000 val=0x00 > > tdebugcon: write addr=0x0000 val=0x00 > > idebugcon: write addr=0x0000 val=0x00 > > odebugcon: write addr=0x0000 val=0x00 > > ndebugcon: write addr=0x0000 val=0x00 > > debugcon: write addr=0x0000 val=0x00 > > rdebugcon: write addr=0x0000 val=0x00 > > odebugcon: write addr=0x0000 val=0x00 > > mdebugcon: write addr=0x0000 val=0x00 > > debugcon: write addr=0x0000 val=0x00 > > adebugcon: write addr=0x0000 val=0x00 > > tdebugcon: write addr=0x0000 val=0x00 > > debugcon: write addr=0x0000 val=0x00 > > > > Oh, that's wrong, val is not always be 0. > > this bug caused by lack of length modifier > > for specifier 'x'. > > Subject is misleading, it doesn't "always print", only when > DEBUG_DEBUGCON is enabled. > > Recommend to abridge the commit message radically. OK, thanks! > > > Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> > > --- > > hw/char/debugcon.c | 2 +- > > 1 files changed, 1 insertions(+), 1 deletions(-) > > > > diff --git a/hw/char/debugcon.c b/hw/char/debugcon.c > > index 0588eeb..44c93e1 100644 > > --- a/hw/char/debugcon.c > > +++ b/hw/char/debugcon.c > > @@ -55,7 +55,7 @@ static void debugcon_ioport_write(void *opaque, hwaddr addr, uint64_t val, > > unsigned char ch = val; > > > > #ifdef DEBUG_DEBUGCON > > - printf("debugcon: write addr=0x%04x val=0x%02x\n", addr, val); > > + printf("debugcon: write addr=0x%04" HWADDR_PRIx " val=0x%02x\n", addr, val); > > #endif > > > > qemu_chr_fe_write(s->chr, &ch, 1);
diff --git a/hw/char/debugcon.c b/hw/char/debugcon.c index 0588eeb..44c93e1 100644 --- a/hw/char/debugcon.c +++ b/hw/char/debugcon.c @@ -55,7 +55,7 @@ static void debugcon_ioport_write(void *opaque, hwaddr addr, uint64_t val, unsigned char ch = val; #ifdef DEBUG_DEBUGCON - printf("debugcon: write addr=0x%04x val=0x%02x\n", addr, val); + printf("debugcon: write addr=0x%04" HWADDR_PRIx " val=0x%02x\n", addr, val); #endif qemu_chr_fe_write(s->chr, &ch, 1);
when use DEBUG_DEBUGCON, screen spits: debugcon: write addr=0x0000 val=0x00 Rdebugcon: write addr=0x0000 val=0x00 udebugcon: write addr=0x0000 val=0x00 ndebugcon: write addr=0x0000 val=0x00 ndebugcon: write addr=0x0000 val=0x00 idebugcon: write addr=0x0000 val=0x00 ndebugcon: write addr=0x0000 val=0x00 gdebugcon: write addr=0x0000 val=0x00 debugcon: write addr=0x0000 val=0x00 odebugcon: write addr=0x0000 val=0x00 pdebugcon: write addr=0x0000 val=0x00 tdebugcon: write addr=0x0000 val=0x00 idebugcon: write addr=0x0000 val=0x00 odebugcon: write addr=0x0000 val=0x00 ndebugcon: write addr=0x0000 val=0x00 debugcon: write addr=0x0000 val=0x00 rdebugcon: write addr=0x0000 val=0x00 odebugcon: write addr=0x0000 val=0x00 mdebugcon: write addr=0x0000 val=0x00 debugcon: write addr=0x0000 val=0x00 adebugcon: write addr=0x0000 val=0x00 tdebugcon: write addr=0x0000 val=0x00 debugcon: write addr=0x0000 val=0x00 Oh, that's wrong, val is not always be 0. this bug caused by lack of length modifier for specifier 'x'. Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> --- hw/char/debugcon.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)