Message ID | 1355317734-55761-2-git-send-email-jfrei@linux.vnet.ibm.com |
---|---|
State | New |
Headers | show |
On 12.12.2012, at 14:08, Jens Freimann wrote: > From: Christian Borntraeger <borntraeger@de.ibm.com> > > Lets move the code to setup IPL for external kernel > or via the zipl rom into a separate file. This allows to > > - define a reboot handler, setting up the PSW appropriately > - reuse that code for several machines (e.g. virtio-ccw and virtio-s390) > - allow different machines to provide different defaults > - enhance the boot code to IPL disks that contain a bootmap that > was created with zipl under LPAR or z/VM (in a future patch) > > Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> > Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> > --- > hw/s390-virtio.c | 100 +++++----------------------------- > hw/s390x/Makefile.objs | 1 + > hw/s390x/ipl.c | 144 +++++++++++++++++++++++++++++++++++++++++++++++++ > hw/s390x/ipl.h | 31 +++++++++++ > 4 files changed, 188 insertions(+), 88 deletions(-) > create mode 100644 hw/s390x/ipl.c > create mode 100644 hw/s390x/ipl.h > > diff --git a/hw/s390-virtio.c b/hw/s390-virtio.c > index ca1bb09..18050b1 100644 > --- a/hw/s390-virtio.c > +++ b/hw/s390-virtio.c > @@ -25,7 +25,6 @@ > #include "boards.h" > #include "monitor.h" > #include "loader.h" > -#include "elf.h" > #include "hw/virtio.h" > #include "hw/sysbus.h" > #include "kvm.h" > @@ -33,6 +32,7 @@ > > #include "hw/s390-virtio-bus.h" > #include "hw/s390x/sclp.h" > +#include "hw/s390x/ipl.h" > > //#define DEBUG_S390 > > @@ -48,17 +48,6 @@ > #define KVM_S390_VIRTIO_RESET 1 > #define KVM_S390_VIRTIO_SET_STATUS 2 > > -#define KERN_IMAGE_START 0x010000UL > -#define KERN_PARM_AREA 0x010480UL > -#define INITRD_START 0x800000UL > -#define INITRD_PARM_START 0x010408UL > -#define INITRD_PARM_SIZE 0x010410UL > -#define PARMFILE_START 0x001000UL > - > -#define ZIPL_START 0x009000UL > -#define ZIPL_LOAD_ADDR 0x009000UL > -#define ZIPL_FILENAME "s390-zipl.rom" > - > #define MAX_BLK_DEVS 10 > > static VirtIOS390Bus *s390_bus; > @@ -156,15 +145,10 @@ static void s390_init(QEMUMachineInitArgs *args) > { > ram_addr_t my_ram_size = args->ram_size; > const char *cpu_model = args->cpu_model; > - const char *kernel_filename = args->kernel_filename; > - const char *kernel_cmdline = args->kernel_cmdline; > - const char *initrd_filename = args->initrd_filename; > CPUS390XState *env = NULL; > + DeviceState *dev; > MemoryRegion *sysmem = get_system_memory(); > MemoryRegion *ram = g_new(MemoryRegion, 1); > - ram_addr_t kernel_size = 0; > - ram_addr_t initrd_offset; > - ram_addr_t initrd_size = 0; > int shift = 0; > uint8_t *storage_keys; > void *virtio_region; > @@ -185,6 +169,15 @@ static void s390_init(QEMUMachineInitArgs *args) > /* get a BUS */ > s390_bus = s390_virtio_bus_init(&my_ram_size); > s390_sclp_init(); > + dev = qdev_create(NULL, "s390-ipl"); > + if (args->kernel_filename) { > + qdev_prop_set_string(dev, "kernel", args->kernel_filename); > + } > + if (args->initrd_filename) { > + qdev_prop_set_string(dev, "initrd", args->initrd_filename); > + } > + qdev_prop_set_string(dev, "cmdline", args->kernel_cmdline); > + qdev_init_nofail(dev); > > /* allocate RAM */ > memory_region_init_ram(ram, "s390.ram", my_ram_size); > @@ -225,76 +218,6 @@ static void s390_init(QEMUMachineInitArgs *args) > tmp_env->storage_keys = storage_keys; > } > > - /* One CPU has to run */ > - s390_add_running_cpu(env); > - > - if (kernel_filename) { > - > - kernel_size = load_elf(kernel_filename, NULL, NULL, NULL, NULL, > - NULL, 1, ELF_MACHINE, 0); > - if (kernel_size == -1UL) { > - kernel_size = load_image_targphys(kernel_filename, 0, ram_size); > - } > - if (kernel_size == -1UL) { > - fprintf(stderr, "qemu: could not load kernel '%s'\n", > - kernel_filename); > - exit(1); > - } > - /* > - * we can not rely on the ELF entry point, since up to 3.2 this > - * value was 0x800 (the SALIPL loader) and it wont work. For > - * all (Linux) cases 0x10000 (KERN_IMAGE_START) should be fine. > - */ > - env->psw.addr = KERN_IMAGE_START; > - env->psw.mask = 0x0000000180000000ULL; > - } else { > - ram_addr_t bios_size = 0; > - char *bios_filename; > - > - /* Load zipl bootloader */ > - if (bios_name == NULL) { > - bios_name = ZIPL_FILENAME; > - } > - > - bios_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name); > - bios_size = load_image_targphys(bios_filename, ZIPL_LOAD_ADDR, 4096); > - g_free(bios_filename); > - > - if ((long)bios_size < 0) { > - hw_error("could not load bootloader '%s'\n", bios_name); > - } > - > - if (bios_size > 4096) { > - hw_error("stage1 bootloader is > 4k\n"); > - } > - > - env->psw.addr = ZIPL_START; > - env->psw.mask = 0x0000000180000000ULL; > - } > - > - if (initrd_filename) { > - initrd_offset = INITRD_START; > - while (kernel_size + 0x100000 > initrd_offset) { > - initrd_offset += 0x100000; > - } > - initrd_size = load_image_targphys(initrd_filename, initrd_offset, > - ram_size - initrd_offset); > - if (initrd_size == -1UL) { > - fprintf(stderr, "qemu: could not load initrd '%s'\n", > - initrd_filename); > - exit(1); > - } > - > - /* we have to overwrite values in the kernel image, which are "rom" */ > - stq_p(rom_ptr(INITRD_PARM_START), initrd_offset); > - stq_p(rom_ptr(INITRD_PARM_SIZE), initrd_size); > - } > - > - if (rom_ptr(KERN_PARM_AREA)) { > - /* we have to overwrite values in the kernel image, which are "rom" */ > - memcpy(rom_ptr(KERN_PARM_AREA), kernel_cmdline, > - strlen(kernel_cmdline) + 1); > - } > > /* Create VirtIO network adapters */ > for(i = 0; i < nb_nics; i++) { > @@ -352,3 +275,4 @@ static void s390_machine_init(void) > } > > machine_init(s390_machine_init); > + > diff --git a/hw/s390x/Makefile.objs b/hw/s390x/Makefile.objs > index 096dfcd..4a5a5d8 100644 > --- a/hw/s390x/Makefile.objs > +++ b/hw/s390x/Makefile.objs > @@ -4,3 +4,4 @@ obj-y := $(addprefix ../,$(obj-y)) > obj-y += sclp.o > obj-y += event-facility.o > obj-y += sclpquiesce.o sclpconsole.o > +obj-y += ipl.o > diff --git a/hw/s390x/ipl.c b/hw/s390x/ipl.c > new file mode 100644 > index 0000000..1f768e3 > --- /dev/null > +++ b/hw/s390x/ipl.c > @@ -0,0 +1,144 @@ > +/* > + * bootloader support > + * > + * Copyright IBM, Corp. 2012 > + * > + * Authors: > + * Christian Borntraeger <borntraeger@de.ibm.com> > + * > + * This work is licensed under the terms of the GNU GPL, version 2 or (at your > + * option) any later version. See the COPYING file in the top-level directory. > + * > + */ > + > +#include <sysemu.h> > +#include "cpu.h" > +#include "elf.h" > +#include "hw/loader.h" > +#include "hw/sysbus.h" > +#include "hw/s390x/ipl.h" > + > +void s390_ipl_cpu(uint64_t pswaddr) Any reason this isn't inlined inside the reset handler? And why is this public? > +{ > + CPUS390XState *env = qemu_get_cpu(0); > + env->psw.addr = pswaddr; > + env->psw.mask = IPL_PSW_MASK; > + s390_add_running_cpu(env); > +} > + > +typedef struct { > + SysBusDevice dev; > + char *kernel; > + char *initrd; > + char *cmdline; > +} S390IPLState; > + > +static int s390_ipl_init(SysBusDevice *dev) > +{ > + S390IPLState *ipl = DO_UPCAST(S390IPLState, dev, dev); > + ram_addr_t kernel_size = 0; > + > + if (!ipl->kernel) { > + ram_addr_t bios_size = 0; > + char *bios_filename; > + > + /* Load zipl bootloader */ > + if (bios_name == NULL) { > + bios_name = ZIPL_FILENAME; > + } > + > + bios_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name); > + bios_size = load_image_targphys(bios_filename, ZIPL_IMAGE_START, 4096); > + g_free(bios_filename); > + > + if ((long)bios_size < 0) { > + hw_error("could not load bootloader '%s'\n", bios_name); > + } > + > + if (bios_size > 4096) { > + hw_error("stage1 bootloader is > 4k\n"); > + } > + return 0; > + } else { > + kernel_size = load_elf(ipl->kernel, NULL, NULL, NULL, NULL, > + NULL, 1, ELF_MACHINE, 0); > + if (kernel_size == -1UL) { > + kernel_size = load_image_targphys(ipl->kernel, 0, ram_size); > + } > + if (kernel_size == -1UL) { > + fprintf(stderr, "could not load kernel '%s'\n", ipl->kernel); > + return -1; > + } > + /* we have to overwrite values in the kernel image, which are "rom" */ > + strcpy(rom_ptr(KERN_PARM_AREA), ipl->cmdline); > + } > + if (ipl->initrd) { > + ram_addr_t initrd_offset, initrd_size; > + > + initrd_offset = INITRD_START; > + while (kernel_size + 0x100000 > initrd_offset) { > + initrd_offset += 0x100000; > + } > + initrd_size = load_image_targphys(ipl->initrd, initrd_offset, > + ram_size - initrd_offset); > + if (initrd_size == -1UL) { > + fprintf(stderr, "qemu: could not load initrd '%s'\n", ipl->initrd); > + exit(1); > + } > + > + /* we have to overwrite values in the kernel image, which are "rom" */ > + stq_p(rom_ptr(INITRD_PARM_START), initrd_offset); > + stq_p(rom_ptr(INITRD_PARM_SIZE), initrd_size); > + } > + > + return 0; > +} > + > +static Property s390_ipl_properties[] = { > + DEFINE_PROP_STRING("kernel", S390IPLState, kernel), > + DEFINE_PROP_STRING("initrd", S390IPLState, initrd), > + DEFINE_PROP_STRING("cmdline", S390IPLState, cmdline), > + DEFINE_PROP_END_OF_LIST(), > +}; > + > +static void s390_ipl_reset(DeviceState *dev) > +{ > + S390IPLState *ipl = DO_UPCAST(S390IPLState, dev.qdev, dev); > + > + if (ipl->kernel) { > + /* > + * we can not rely on the ELF entry point, since up to 3.2 this > + * value was 0x800 (the SALIPL loader) and it wont work. For > + * all (Linux) cases 0x10000 (KERN_IMAGE_START) should be fine. > + */ > + return s390_ipl_cpu(KERN_IMAGE_START); > + } else { > + return s390_ipl_cpu(ZIPL_IMAGE_START); > + } > +} > + > +static void s390_ipl_class_init(ObjectClass *klass, void *data) > +{ > + DeviceClass *dc = DEVICE_CLASS(klass); > + SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); > + > + k->init = s390_ipl_init; > + dc->props = s390_ipl_properties; > + dc->reset = s390_ipl_reset; > + dc->no_user = 1; > +} > + > +static TypeInfo s390_ipl_info = { > + .class_init = s390_ipl_class_init, > + .parent = TYPE_SYS_BUS_DEVICE, > + .name = "s390-ipl", > + .instance_size = sizeof(S390IPLState), > +}; > + > +static void s390_register_ipl(void) > +{ > + type_register_static(&s390_ipl_info); > +} > + > +type_init(s390_register_ipl) > + > diff --git a/hw/s390x/ipl.h b/hw/s390x/ipl.h > new file mode 100644 > index 0000000..d6318e0 > --- /dev/null > +++ b/hw/s390x/ipl.h > @@ -0,0 +1,31 @@ > +/* > + * ipl support > + * > + * Copyright IBM, Corp. 2012 > + * > + * Authors: > + * Christian Borntraeger <borntraeger@de.ibm.com> > + * > + * This work is licensed under the terms of the GNU GPL, version 2 or (at your > + * option) any later version. See the COPYING file in the top-level directory. > + * > + */ > + > + > +#ifndef S390_IPL_H > +#define S390_IPL_H > + > +#define KERN_IMAGE_START 0x010000UL > +#define KERN_PARM_AREA 0x010480UL > +#define INITRD_START 0x800000UL > +#define INITRD_PARM_START 0x010408UL > +#define INITRD_PARM_SIZE 0x010410UL > +#define PARMFILE_START 0x001000UL > +#define ZIPL_FILENAME "s390-zipl.rom" > +#define ZIPL_IMAGE_START 0x009000UL > +#define IPL_PSW_MASK 0x0000000180000000ULL I don't think we need the above values outside of ipl.c, no? :) Alex > + > +/* starts the first cpu with the given address and a default psw mask */ > +void s390_ipl_cpu(uint64_t pswaddr); > + > +#endif //S390_IPL_H > -- > 1.7.12.4 >
On 12/12/12 14:31, Alexander Graf wrote: >> +void s390_ipl_cpu(uint64_t pswaddr) > > Any reason this isn't inlined inside the reset handler? And why is this public? Well, the former patch version had the disk bootmap parsing in a separate file, but we can certainly unexport that and make it inline in this patch. [...] >> +#define KERN_IMAGE_START 0x010000UL >> +#define KERN_PARM_AREA 0x010480UL >> +#define INITRD_START 0x800000UL >> +#define INITRD_PARM_START 0x010408UL >> +#define INITRD_PARM_SIZE 0x010410UL >> +#define PARMFILE_START 0x001000UL >> +#define ZIPL_FILENAME "s390-zipl.rom" >> +#define ZIPL_IMAGE_START 0x009000UL >> +#define IPL_PSW_MASK 0x0000000180000000ULL > > I don't think we need the above values outside of ipl.c, no? :) See above. Will move that into ipl.c
diff --git a/hw/s390-virtio.c b/hw/s390-virtio.c index ca1bb09..18050b1 100644 --- a/hw/s390-virtio.c +++ b/hw/s390-virtio.c @@ -25,7 +25,6 @@ #include "boards.h" #include "monitor.h" #include "loader.h" -#include "elf.h" #include "hw/virtio.h" #include "hw/sysbus.h" #include "kvm.h" @@ -33,6 +32,7 @@ #include "hw/s390-virtio-bus.h" #include "hw/s390x/sclp.h" +#include "hw/s390x/ipl.h" //#define DEBUG_S390 @@ -48,17 +48,6 @@ #define KVM_S390_VIRTIO_RESET 1 #define KVM_S390_VIRTIO_SET_STATUS 2 -#define KERN_IMAGE_START 0x010000UL -#define KERN_PARM_AREA 0x010480UL -#define INITRD_START 0x800000UL -#define INITRD_PARM_START 0x010408UL -#define INITRD_PARM_SIZE 0x010410UL -#define PARMFILE_START 0x001000UL - -#define ZIPL_START 0x009000UL -#define ZIPL_LOAD_ADDR 0x009000UL -#define ZIPL_FILENAME "s390-zipl.rom" - #define MAX_BLK_DEVS 10 static VirtIOS390Bus *s390_bus; @@ -156,15 +145,10 @@ static void s390_init(QEMUMachineInitArgs *args) { ram_addr_t my_ram_size = args->ram_size; const char *cpu_model = args->cpu_model; - const char *kernel_filename = args->kernel_filename; - const char *kernel_cmdline = args->kernel_cmdline; - const char *initrd_filename = args->initrd_filename; CPUS390XState *env = NULL; + DeviceState *dev; MemoryRegion *sysmem = get_system_memory(); MemoryRegion *ram = g_new(MemoryRegion, 1); - ram_addr_t kernel_size = 0; - ram_addr_t initrd_offset; - ram_addr_t initrd_size = 0; int shift = 0; uint8_t *storage_keys; void *virtio_region; @@ -185,6 +169,15 @@ static void s390_init(QEMUMachineInitArgs *args) /* get a BUS */ s390_bus = s390_virtio_bus_init(&my_ram_size); s390_sclp_init(); + dev = qdev_create(NULL, "s390-ipl"); + if (args->kernel_filename) { + qdev_prop_set_string(dev, "kernel", args->kernel_filename); + } + if (args->initrd_filename) { + qdev_prop_set_string(dev, "initrd", args->initrd_filename); + } + qdev_prop_set_string(dev, "cmdline", args->kernel_cmdline); + qdev_init_nofail(dev); /* allocate RAM */ memory_region_init_ram(ram, "s390.ram", my_ram_size); @@ -225,76 +218,6 @@ static void s390_init(QEMUMachineInitArgs *args) tmp_env->storage_keys = storage_keys; } - /* One CPU has to run */ - s390_add_running_cpu(env); - - if (kernel_filename) { - - kernel_size = load_elf(kernel_filename, NULL, NULL, NULL, NULL, - NULL, 1, ELF_MACHINE, 0); - if (kernel_size == -1UL) { - kernel_size = load_image_targphys(kernel_filename, 0, ram_size); - } - if (kernel_size == -1UL) { - fprintf(stderr, "qemu: could not load kernel '%s'\n", - kernel_filename); - exit(1); - } - /* - * we can not rely on the ELF entry point, since up to 3.2 this - * value was 0x800 (the SALIPL loader) and it wont work. For - * all (Linux) cases 0x10000 (KERN_IMAGE_START) should be fine. - */ - env->psw.addr = KERN_IMAGE_START; - env->psw.mask = 0x0000000180000000ULL; - } else { - ram_addr_t bios_size = 0; - char *bios_filename; - - /* Load zipl bootloader */ - if (bios_name == NULL) { - bios_name = ZIPL_FILENAME; - } - - bios_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name); - bios_size = load_image_targphys(bios_filename, ZIPL_LOAD_ADDR, 4096); - g_free(bios_filename); - - if ((long)bios_size < 0) { - hw_error("could not load bootloader '%s'\n", bios_name); - } - - if (bios_size > 4096) { - hw_error("stage1 bootloader is > 4k\n"); - } - - env->psw.addr = ZIPL_START; - env->psw.mask = 0x0000000180000000ULL; - } - - if (initrd_filename) { - initrd_offset = INITRD_START; - while (kernel_size + 0x100000 > initrd_offset) { - initrd_offset += 0x100000; - } - initrd_size = load_image_targphys(initrd_filename, initrd_offset, - ram_size - initrd_offset); - if (initrd_size == -1UL) { - fprintf(stderr, "qemu: could not load initrd '%s'\n", - initrd_filename); - exit(1); - } - - /* we have to overwrite values in the kernel image, which are "rom" */ - stq_p(rom_ptr(INITRD_PARM_START), initrd_offset); - stq_p(rom_ptr(INITRD_PARM_SIZE), initrd_size); - } - - if (rom_ptr(KERN_PARM_AREA)) { - /* we have to overwrite values in the kernel image, which are "rom" */ - memcpy(rom_ptr(KERN_PARM_AREA), kernel_cmdline, - strlen(kernel_cmdline) + 1); - } /* Create VirtIO network adapters */ for(i = 0; i < nb_nics; i++) { @@ -352,3 +275,4 @@ static void s390_machine_init(void) } machine_init(s390_machine_init); + diff --git a/hw/s390x/Makefile.objs b/hw/s390x/Makefile.objs index 096dfcd..4a5a5d8 100644 --- a/hw/s390x/Makefile.objs +++ b/hw/s390x/Makefile.objs @@ -4,3 +4,4 @@ obj-y := $(addprefix ../,$(obj-y)) obj-y += sclp.o obj-y += event-facility.o obj-y += sclpquiesce.o sclpconsole.o +obj-y += ipl.o diff --git a/hw/s390x/ipl.c b/hw/s390x/ipl.c new file mode 100644 index 0000000..1f768e3 --- /dev/null +++ b/hw/s390x/ipl.c @@ -0,0 +1,144 @@ +/* + * bootloader support + * + * Copyright IBM, Corp. 2012 + * + * Authors: + * Christian Borntraeger <borntraeger@de.ibm.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or (at your + * option) any later version. See the COPYING file in the top-level directory. + * + */ + +#include <sysemu.h> +#include "cpu.h" +#include "elf.h" +#include "hw/loader.h" +#include "hw/sysbus.h" +#include "hw/s390x/ipl.h" + +void s390_ipl_cpu(uint64_t pswaddr) +{ + CPUS390XState *env = qemu_get_cpu(0); + env->psw.addr = pswaddr; + env->psw.mask = IPL_PSW_MASK; + s390_add_running_cpu(env); +} + +typedef struct { + SysBusDevice dev; + char *kernel; + char *initrd; + char *cmdline; +} S390IPLState; + +static int s390_ipl_init(SysBusDevice *dev) +{ + S390IPLState *ipl = DO_UPCAST(S390IPLState, dev, dev); + ram_addr_t kernel_size = 0; + + if (!ipl->kernel) { + ram_addr_t bios_size = 0; + char *bios_filename; + + /* Load zipl bootloader */ + if (bios_name == NULL) { + bios_name = ZIPL_FILENAME; + } + + bios_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name); + bios_size = load_image_targphys(bios_filename, ZIPL_IMAGE_START, 4096); + g_free(bios_filename); + + if ((long)bios_size < 0) { + hw_error("could not load bootloader '%s'\n", bios_name); + } + + if (bios_size > 4096) { + hw_error("stage1 bootloader is > 4k\n"); + } + return 0; + } else { + kernel_size = load_elf(ipl->kernel, NULL, NULL, NULL, NULL, + NULL, 1, ELF_MACHINE, 0); + if (kernel_size == -1UL) { + kernel_size = load_image_targphys(ipl->kernel, 0, ram_size); + } + if (kernel_size == -1UL) { + fprintf(stderr, "could not load kernel '%s'\n", ipl->kernel); + return -1; + } + /* we have to overwrite values in the kernel image, which are "rom" */ + strcpy(rom_ptr(KERN_PARM_AREA), ipl->cmdline); + } + if (ipl->initrd) { + ram_addr_t initrd_offset, initrd_size; + + initrd_offset = INITRD_START; + while (kernel_size + 0x100000 > initrd_offset) { + initrd_offset += 0x100000; + } + initrd_size = load_image_targphys(ipl->initrd, initrd_offset, + ram_size - initrd_offset); + if (initrd_size == -1UL) { + fprintf(stderr, "qemu: could not load initrd '%s'\n", ipl->initrd); + exit(1); + } + + /* we have to overwrite values in the kernel image, which are "rom" */ + stq_p(rom_ptr(INITRD_PARM_START), initrd_offset); + stq_p(rom_ptr(INITRD_PARM_SIZE), initrd_size); + } + + return 0; +} + +static Property s390_ipl_properties[] = { + DEFINE_PROP_STRING("kernel", S390IPLState, kernel), + DEFINE_PROP_STRING("initrd", S390IPLState, initrd), + DEFINE_PROP_STRING("cmdline", S390IPLState, cmdline), + DEFINE_PROP_END_OF_LIST(), +}; + +static void s390_ipl_reset(DeviceState *dev) +{ + S390IPLState *ipl = DO_UPCAST(S390IPLState, dev.qdev, dev); + + if (ipl->kernel) { + /* + * we can not rely on the ELF entry point, since up to 3.2 this + * value was 0x800 (the SALIPL loader) and it wont work. For + * all (Linux) cases 0x10000 (KERN_IMAGE_START) should be fine. + */ + return s390_ipl_cpu(KERN_IMAGE_START); + } else { + return s390_ipl_cpu(ZIPL_IMAGE_START); + } +} + +static void s390_ipl_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); + + k->init = s390_ipl_init; + dc->props = s390_ipl_properties; + dc->reset = s390_ipl_reset; + dc->no_user = 1; +} + +static TypeInfo s390_ipl_info = { + .class_init = s390_ipl_class_init, + .parent = TYPE_SYS_BUS_DEVICE, + .name = "s390-ipl", + .instance_size = sizeof(S390IPLState), +}; + +static void s390_register_ipl(void) +{ + type_register_static(&s390_ipl_info); +} + +type_init(s390_register_ipl) + diff --git a/hw/s390x/ipl.h b/hw/s390x/ipl.h new file mode 100644 index 0000000..d6318e0 --- /dev/null +++ b/hw/s390x/ipl.h @@ -0,0 +1,31 @@ +/* + * ipl support + * + * Copyright IBM, Corp. 2012 + * + * Authors: + * Christian Borntraeger <borntraeger@de.ibm.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or (at your + * option) any later version. See the COPYING file in the top-level directory. + * + */ + + +#ifndef S390_IPL_H +#define S390_IPL_H + +#define KERN_IMAGE_START 0x010000UL +#define KERN_PARM_AREA 0x010480UL +#define INITRD_START 0x800000UL +#define INITRD_PARM_START 0x010408UL +#define INITRD_PARM_SIZE 0x010410UL +#define PARMFILE_START 0x001000UL +#define ZIPL_FILENAME "s390-zipl.rom" +#define ZIPL_IMAGE_START 0x009000UL +#define IPL_PSW_MASK 0x0000000180000000ULL + +/* starts the first cpu with the given address and a default psw mask */ +void s390_ipl_cpu(uint64_t pswaddr); + +#endif //S390_IPL_H