Message ID | 1354005233-60955-1-git-send-email-jfrei@linux.vnet.ibm.com |
---|---|
State | New |
Headers | show |
On 27.11.2012, at 09:33, Jens Freimann <jfrei@linux.vnet.ibm.com> wrote: > When resetting vcpus on s390/kvm we have to clear registers, psw > and prefix as described in the z/Architecture PoP, otherwise a > reboot won't work. IPL PSW and prefix are set later on by the > s390-ipl device reset code. > > Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> > --- > > changes v1->v2: > - moved cpu reset code from kvm.c to cpu.c > - only kvm initial_reset ioctl remains in kvm.c > - registered reset handler for s390 cpu reset, like x86 does it > > target-s390x/cpu.c | 29 +++++++++++++++++++++++++++-- > target-s390x/kvm.c | 9 ++++++++- > 2 files changed, 35 insertions(+), 3 deletions(-) > > diff --git a/target-s390x/cpu.c b/target-s390x/cpu.c > index 619b202..f74d6f6 100644 > --- a/target-s390x/cpu.c > +++ b/target-s390x/cpu.c > @@ -24,10 +24,21 @@ > #include "qemu-common.h" > #include "qemu-timer.h" > > +#ifndef CONFIG_USER_ONLY > +#include "hw/s390x/sclp.h" > + > +/* TODO: remove me, when reset over QOM tree is implemented */ > +static void s390_cpu_machine_reset_cb(void *opaque) > +{ > + S390CPU *cpu = opaque; > + cpu_reset(CPU(cpu)); > +} > +#endif > > /* CPUClass::reset() */ > static void s390_cpu_reset(CPUState *s) > { > + int i; > S390CPU *cpu = S390_CPU(s); > S390CPUClass *scc = S390_CPU_GET_CLASS(cpu); > CPUS390XState *env = &cpu->env; > @@ -40,9 +51,22 @@ static void s390_cpu_reset(CPUState *s) > scc->parent_reset(s); > > memset(env, 0, offsetof(CPUS390XState, breakpoints)); > - /* FIXME: reset vector? */ > + > + env->halted = 1; Every cpu would start in halted state? So how does the primary one get rolling? > + env->exception_index = EXCP_HLT; > + for (i = 0; i < 16; i++) { > + env->regs[i] = 0; > + env->aregs[i] = 0; > + env->cregs[i] = 0; > + env->fregs[i].ll = 0; > + } Please make this more self-adjusting. For example using memset(sizeof));. You could also make the clear implicit by ensuring the registers are in the cpu struct before breakpoints. But explicit tends to be more readable ;). > + /* architectured initial values for CR 0 and 14 */ > + env->cregs[0] = 0xE0UL; > + env->cregs[14] = 0xC2000000UL; > + env->psw.mask = 0; > + env->psw.addr = 0; > + env->psa = 0; > tlb_flush(env, 1); > - s390_add_running_cpu(env); Why can we remove this one? Alex > } > > static void s390_cpu_initfn(Object *obj) > @@ -56,6 +80,7 @@ static void s390_cpu_initfn(Object *obj) > > cpu_exec_init(env); > #if !defined(CONFIG_USER_ONLY) > + qemu_register_reset(s390_cpu_machine_reset_cb, cpu); > qemu_get_timedate(&tm, 0); > env->tod_offset = TOD_UNIX_EPOCH + > (time2tod(mktimegm(&tm)) * 1000000000ULL); > diff --git a/target-s390x/kvm.c b/target-s390x/kvm.c > index 94de764..d26555f 100644 > --- a/target-s390x/kvm.c > +++ b/target-s390x/kvm.c > @@ -85,7 +85,14 @@ int kvm_arch_init_vcpu(CPUS390XState *env) > > void kvm_arch_reset_vcpu(CPUS390XState *env) > { > - /* FIXME: add code to reset vcpu. */ > + /* The initial reset call is needed here to reset in-kernel > + * vcpu data that we can't access directly from QEMU > + * (i.e. with older kernels which don't support sync_regs/ONE_REG). > + * Before this ioctl cpu_synchronize_state() is called in common kvm > + * code (kvm-all) */ > + if (kvm_vcpu_ioctl(env, KVM_S390_INITIAL_RESET, NULL)) { > + perror("Can't reset vcpu\n"); > + } > } > > int kvm_arch_put_registers(CPUS390XState *env, int level) > -- > 1.7.12.4 >
On Tue, Nov 27, 2012 at 10:37:25AM +0100, Alexander Graf wrote: > > > On 27.11.2012, at 09:33, Jens Freimann <jfrei@linux.vnet.ibm.com> wrote: > > > When resetting vcpus on s390/kvm we have to clear registers, psw > > and prefix as described in the z/Architecture PoP, otherwise a > > reboot won't work. IPL PSW and prefix are set later on by the > > s390-ipl device reset code. > > > > Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> > > --- > > > > changes v1->v2: > > - moved cpu reset code from kvm.c to cpu.c > > - only kvm initial_reset ioctl remains in kvm.c > > - registered reset handler for s390 cpu reset, like x86 does it > > > > target-s390x/cpu.c | 29 +++++++++++++++++++++++++++-- > > target-s390x/kvm.c | 9 ++++++++- > > 2 files changed, 35 insertions(+), 3 deletions(-) > > > > diff --git a/target-s390x/cpu.c b/target-s390x/cpu.c > > index 619b202..f74d6f6 100644 > > --- a/target-s390x/cpu.c > > +++ b/target-s390x/cpu.c > > @@ -24,10 +24,21 @@ > > #include "qemu-common.h" > > #include "qemu-timer.h" > > > > +#ifndef CONFIG_USER_ONLY > > +#include "hw/s390x/sclp.h" > > + > > +/* TODO: remove me, when reset over QOM tree is implemented */ > > +static void s390_cpu_machine_reset_cb(void *opaque) > > +{ > > + S390CPU *cpu = opaque; > > + cpu_reset(CPU(cpu)); > > +} > > +#endif > > > > /* CPUClass::reset() */ > > static void s390_cpu_reset(CPUState *s) > > { > > + int i; > > S390CPU *cpu = S390_CPU(s); > > S390CPUClass *scc = S390_CPU_GET_CLASS(cpu); > > CPUS390XState *env = &cpu->env; > > @@ -40,9 +51,22 @@ static void s390_cpu_reset(CPUState *s) > > scc->parent_reset(s); > > > > memset(env, 0, offsetof(CPUS390XState, breakpoints)); > > - /* FIXME: reset vector? */ > > + > > + env->halted = 1; > > Every cpu would start in halted state? So how does the primary one get rolling? The first cpu is set to not-halted by the ipl device reset code. > > > + env->exception_index = EXCP_HLT; > > + for (i = 0; i < 16; i++) { > > + env->regs[i] = 0; > > + env->aregs[i] = 0; > > + env->cregs[i] = 0; > > + env->fregs[i].ll = 0; > > + } > > Please make this more self-adjusting. For example using memset(sizeof));. You could also make the clear implicit by ensuring the registers are in the cpu struct before breakpoints. But explicit tends to be more readable ;). Ok > > + /* architectured initial values for CR 0 and 14 */ > > + env->cregs[0] = 0xE0UL; > > + env->cregs[14] = 0xC2000000UL; > > + env->psw.mask = 0; > > + env->psw.addr = 0; > > + env->psa = 0; > > tlb_flush(env, 1); > > - s390_add_running_cpu(env); > > Why can we remove this one? Good point. I took a closer look and found that we add an additional cpu to the counter every time we reboot. Will fix this and send a new version. Jens > > Alex > > > } > > > > static void s390_cpu_initfn(Object *obj) > > @@ -56,6 +80,7 @@ static void s390_cpu_initfn(Object *obj) > > > > cpu_exec_init(env); > > #if !defined(CONFIG_USER_ONLY) > > + qemu_register_reset(s390_cpu_machine_reset_cb, cpu); > > qemu_get_timedate(&tm, 0); > > env->tod_offset = TOD_UNIX_EPOCH + > > (time2tod(mktimegm(&tm)) * 1000000000ULL); > > diff --git a/target-s390x/kvm.c b/target-s390x/kvm.c > > index 94de764..d26555f 100644 > > --- a/target-s390x/kvm.c > > +++ b/target-s390x/kvm.c > > @@ -85,7 +85,14 @@ int kvm_arch_init_vcpu(CPUS390XState *env) > > > > void kvm_arch_reset_vcpu(CPUS390XState *env) > > { > > - /* FIXME: add code to reset vcpu. */ > > + /* The initial reset call is needed here to reset in-kernel > > + * vcpu data that we can't access directly from QEMU > > + * (i.e. with older kernels which don't support sync_regs/ONE_REG). > > + * Before this ioctl cpu_synchronize_state() is called in common kvm > > + * code (kvm-all) */ > > + if (kvm_vcpu_ioctl(env, KVM_S390_INITIAL_RESET, NULL)) { > > + perror("Can't reset vcpu\n"); > > + } > > } > > > > int kvm_arch_put_registers(CPUS390XState *env, int level) > > -- > > 1.7.12.4 > > >
On 11/27/2012 06:13 PM, Jens Freimann wrote: > On Tue, Nov 27, 2012 at 10:37:25AM +0100, Alexander Graf wrote: >> >> On 27.11.2012, at 09:33, Jens Freimann<jfrei@linux.vnet.ibm.com> wrote: >> >>> When resetting vcpus on s390/kvm we have to clear registers, psw >>> and prefix as described in the z/Architecture PoP, otherwise a >>> reboot won't work. IPL PSW and prefix are set later on by the >>> s390-ipl device reset code. >>> >>> Signed-off-by: Jens Freimann<jfrei@linux.vnet.ibm.com> >>> --- >>> >>> changes v1->v2: >>> - moved cpu reset code from kvm.c to cpu.c >>> - only kvm initial_reset ioctl remains in kvm.c >>> - registered reset handler for s390 cpu reset, like x86 does it >>> >>> target-s390x/cpu.c | 29 +++++++++++++++++++++++++++-- >>> target-s390x/kvm.c | 9 ++++++++- >>> 2 files changed, 35 insertions(+), 3 deletions(-) >>> >>> diff --git a/target-s390x/cpu.c b/target-s390x/cpu.c >>> index 619b202..f74d6f6 100644 >>> --- a/target-s390x/cpu.c >>> +++ b/target-s390x/cpu.c >>> @@ -24,10 +24,21 @@ >>> #include "qemu-common.h" >>> #include "qemu-timer.h" >>> >>> +#ifndef CONFIG_USER_ONLY >>> +#include "hw/s390x/sclp.h" >>> + >>> +/* TODO: remove me, when reset over QOM tree is implemented */ >>> +static void s390_cpu_machine_reset_cb(void *opaque) >>> +{ >>> + S390CPU *cpu = opaque; >>> + cpu_reset(CPU(cpu)); >>> +} >>> +#endif >>> >>> /* CPUClass::reset() */ >>> static void s390_cpu_reset(CPUState *s) >>> { >>> + int i; >>> S390CPU *cpu = S390_CPU(s); >>> S390CPUClass *scc = S390_CPU_GET_CLASS(cpu); >>> CPUS390XState *env =&cpu->env; >>> @@ -40,9 +51,22 @@ static void s390_cpu_reset(CPUState *s) >>> scc->parent_reset(s); >>> >>> memset(env, 0, offsetof(CPUS390XState, breakpoints)); >>> - /* FIXME: reset vector? */ >>> + >>> + env->halted = 1; >> Every cpu would start in halted state? So how does the primary one get rolling? > The first cpu is set to not-halted by the ipl device reset code. Please document this here. >>> + env->exception_index = EXCP_HLT; >>> + for (i = 0; i< 16; i++) { >>> + env->regs[i] = 0; >>> + env->aregs[i] = 0; >>> + env->cregs[i] = 0; >>> + env->fregs[i].ll = 0; >>> + } >> Please make this more self-adjusting. For example using memset(sizeof));. You could also make the clear implicit by ensuring the registers are in the cpu struct before breakpoints. But explicit tends to be more readable ;). > Ok > >>> + /* architectured initial values for CR 0 and 14 */ >>> + env->cregs[0] = 0xE0UL; >>> + env->cregs[14] = 0xC2000000UL; >>> + env->psw.mask = 0; >>> + env->psw.addr = 0; >>> + env->psa = 0; >>> tlb_flush(env, 1); >>> - s390_add_running_cpu(env); >> Why can we remove this one? > Good point. I took a closer look and found that we add an additional > cpu to the counter every time we reboot. Will fix this and send a new > version. Yeah, if anything this should be a separate patch :). Alex
diff --git a/target-s390x/cpu.c b/target-s390x/cpu.c index 619b202..f74d6f6 100644 --- a/target-s390x/cpu.c +++ b/target-s390x/cpu.c @@ -24,10 +24,21 @@ #include "qemu-common.h" #include "qemu-timer.h" +#ifndef CONFIG_USER_ONLY +#include "hw/s390x/sclp.h" + +/* TODO: remove me, when reset over QOM tree is implemented */ +static void s390_cpu_machine_reset_cb(void *opaque) +{ + S390CPU *cpu = opaque; + cpu_reset(CPU(cpu)); +} +#endif /* CPUClass::reset() */ static void s390_cpu_reset(CPUState *s) { + int i; S390CPU *cpu = S390_CPU(s); S390CPUClass *scc = S390_CPU_GET_CLASS(cpu); CPUS390XState *env = &cpu->env; @@ -40,9 +51,22 @@ static void s390_cpu_reset(CPUState *s) scc->parent_reset(s); memset(env, 0, offsetof(CPUS390XState, breakpoints)); - /* FIXME: reset vector? */ + + env->halted = 1; + env->exception_index = EXCP_HLT; + for (i = 0; i < 16; i++) { + env->regs[i] = 0; + env->aregs[i] = 0; + env->cregs[i] = 0; + env->fregs[i].ll = 0; + } + /* architectured initial values for CR 0 and 14 */ + env->cregs[0] = 0xE0UL; + env->cregs[14] = 0xC2000000UL; + env->psw.mask = 0; + env->psw.addr = 0; + env->psa = 0; tlb_flush(env, 1); - s390_add_running_cpu(env); } static void s390_cpu_initfn(Object *obj) @@ -56,6 +80,7 @@ static void s390_cpu_initfn(Object *obj) cpu_exec_init(env); #if !defined(CONFIG_USER_ONLY) + qemu_register_reset(s390_cpu_machine_reset_cb, cpu); qemu_get_timedate(&tm, 0); env->tod_offset = TOD_UNIX_EPOCH + (time2tod(mktimegm(&tm)) * 1000000000ULL); diff --git a/target-s390x/kvm.c b/target-s390x/kvm.c index 94de764..d26555f 100644 --- a/target-s390x/kvm.c +++ b/target-s390x/kvm.c @@ -85,7 +85,14 @@ int kvm_arch_init_vcpu(CPUS390XState *env) void kvm_arch_reset_vcpu(CPUS390XState *env) { - /* FIXME: add code to reset vcpu. */ + /* The initial reset call is needed here to reset in-kernel + * vcpu data that we can't access directly from QEMU + * (i.e. with older kernels which don't support sync_regs/ONE_REG). + * Before this ioctl cpu_synchronize_state() is called in common kvm + * code (kvm-all) */ + if (kvm_vcpu_ioctl(env, KVM_S390_INITIAL_RESET, NULL)) { + perror("Can't reset vcpu\n"); + } } int kvm_arch_put_registers(CPUS390XState *env, int level)
When resetting vcpus on s390/kvm we have to clear registers, psw and prefix as described in the z/Architecture PoP, otherwise a reboot won't work. IPL PSW and prefix are set later on by the s390-ipl device reset code. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> --- changes v1->v2: - moved cpu reset code from kvm.c to cpu.c - only kvm initial_reset ioctl remains in kvm.c - registered reset handler for s390 cpu reset, like x86 does it target-s390x/cpu.c | 29 +++++++++++++++++++++++++++-- target-s390x/kvm.c | 9 ++++++++- 2 files changed, 35 insertions(+), 3 deletions(-)