Message ID | 1349300158-19113-3-git-send-email-lcapitulino@redhat.com |
---|---|
State | New |
Headers | show |
On Wed, Oct 03, 2012 at 06:35:58PM -0300, Luiz Capitulino wrote: > Has the side effect of changing the default directory used to > save the freeze status file from /tmp to ${prefix}/var/run. > > This is a beneficial change for two reasons: > > 1. FHS states that programs must not assume that files in /tmp will > still exist between invocations of the program. This defeats > the purpose of the freeze status file > > 2. FHS dictates that /var/run must be cleaned on boot, this > ensures that a stale freeze status file will be removed on boot > > Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> > --- > qemu-ga.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/qemu-ga.c b/qemu-ga.c > index b747470..daeaea5 100644 > --- a/qemu-ga.c > +++ b/qemu-ga.c > @@ -40,8 +40,8 @@ > #else > #define QGA_VIRTIO_PATH_DEFAULT "\\\\.\\Global\\org.qemu.guest_agent.0" > #endif > -#define QGA_PIDFILE_DEFAULT "/var/run/qemu-ga.pid" > -#define QGA_STATEDIR_DEFAULT "/tmp" > +#define QGA_STATEDIR_DEFAULT CONFIG_QEMU_LOCALSTATEDIR "/run" > +#define QGA_PIDFILE_DEFAULT QGA_STATEDIR_DEFAULT "/qemu-ga.pid" Just to confirm, in configure we have: echo "qemu_localstatedir=$local_statedir" >> $config_host_mak Is there some magic that generates a CONFIG_QEMU_LOCALSTATEDIR with the same value? If so: Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> > #define QGA_SENTINEL_BYTE 0xFF > > struct GAState { > -- > 1.7.12.315.g682ce8b >
On Thu, 4 Oct 2012 10:47:06 -0500 Michael Roth <mdroth@linux.vnet.ibm.com> wrote: > On Wed, Oct 03, 2012 at 06:35:58PM -0300, Luiz Capitulino wrote: > > Has the side effect of changing the default directory used to > > save the freeze status file from /tmp to ${prefix}/var/run. > > > > This is a beneficial change for two reasons: > > > > 1. FHS states that programs must not assume that files in /tmp will > > still exist between invocations of the program. This defeats > > the purpose of the freeze status file > > > > 2. FHS dictates that /var/run must be cleaned on boot, this > > ensures that a stale freeze status file will be removed on boot > > > > Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> > > --- > > qemu-ga.c | 4 ++-- > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/qemu-ga.c b/qemu-ga.c > > index b747470..daeaea5 100644 > > --- a/qemu-ga.c > > +++ b/qemu-ga.c > > @@ -40,8 +40,8 @@ > > #else > > #define QGA_VIRTIO_PATH_DEFAULT "\\\\.\\Global\\org.qemu.guest_agent.0" > > #endif > > -#define QGA_PIDFILE_DEFAULT "/var/run/qemu-ga.pid" > > -#define QGA_STATEDIR_DEFAULT "/tmp" > > +#define QGA_STATEDIR_DEFAULT CONFIG_QEMU_LOCALSTATEDIR "/run" > > +#define QGA_PIDFILE_DEFAULT QGA_STATEDIR_DEFAULT "/qemu-ga.pid" > > Just to confirm, in configure we have: > > echo "qemu_localstatedir=$local_statedir" >> $config_host_mak > > Is there some magic that generates a CONFIG_QEMU_LOCALSTATEDIR with the > same value? If so: Yes, that's done by scripts/create_config > Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Btw, is this going through your tree? > > > #define QGA_SENTINEL_BYTE 0xFF > > > > struct GAState { > > -- > > 1.7.12.315.g682ce8b > > >
On Thu, Oct 04, 2012 at 12:50:15PM -0300, Luiz Capitulino wrote: > On Thu, 4 Oct 2012 10:47:06 -0500 > Michael Roth <mdroth@linux.vnet.ibm.com> wrote: > > > On Wed, Oct 03, 2012 at 06:35:58PM -0300, Luiz Capitulino wrote: > > > Has the side effect of changing the default directory used to > > > save the freeze status file from /tmp to ${prefix}/var/run. > > > > > > This is a beneficial change for two reasons: > > > > > > 1. FHS states that programs must not assume that files in /tmp will > > > still exist between invocations of the program. This defeats > > > the purpose of the freeze status file > > > > > > 2. FHS dictates that /var/run must be cleaned on boot, this > > > ensures that a stale freeze status file will be removed on boot > > > > > > Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> > > > --- > > > qemu-ga.c | 4 ++-- > > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > > > diff --git a/qemu-ga.c b/qemu-ga.c > > > index b747470..daeaea5 100644 > > > --- a/qemu-ga.c > > > +++ b/qemu-ga.c > > > @@ -40,8 +40,8 @@ > > > #else > > > #define QGA_VIRTIO_PATH_DEFAULT "\\\\.\\Global\\org.qemu.guest_agent.0" > > > #endif > > > -#define QGA_PIDFILE_DEFAULT "/var/run/qemu-ga.pid" > > > -#define QGA_STATEDIR_DEFAULT "/tmp" > > > +#define QGA_STATEDIR_DEFAULT CONFIG_QEMU_LOCALSTATEDIR "/run" > > > +#define QGA_PIDFILE_DEFAULT QGA_STATEDIR_DEFAULT "/qemu-ga.pid" > > > > Just to confirm, in configure we have: > > > > echo "qemu_localstatedir=$local_statedir" >> $config_host_mak > > > > Is there some magic that generates a CONFIG_QEMU_LOCALSTATEDIR with the > > same value? If so: > > Yes, that's done by scripts/create_config > > > Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> > > Btw, is this going through your tree? Yup, was planning on sending a pull tomorrow after some basic testing. Same for the standalone pidfile fix-up. > > > > > > #define QGA_SENTINEL_BYTE 0xFF > > > > > > struct GAState { > > > -- > > > 1.7.12.315.g682ce8b > > > > > >
On Thu, 4 Oct 2012 12:37:55 -0500 Michael Roth <mdroth@linux.vnet.ibm.com> wrote: > On Thu, Oct 04, 2012 at 12:50:15PM -0300, Luiz Capitulino wrote: > > On Thu, 4 Oct 2012 10:47:06 -0500 > > Michael Roth <mdroth@linux.vnet.ibm.com> wrote: > > > > > On Wed, Oct 03, 2012 at 06:35:58PM -0300, Luiz Capitulino wrote: > > > > Has the side effect of changing the default directory used to > > > > save the freeze status file from /tmp to ${prefix}/var/run. > > > > > > > > This is a beneficial change for two reasons: > > > > > > > > 1. FHS states that programs must not assume that files in /tmp will > > > > still exist between invocations of the program. This defeats > > > > the purpose of the freeze status file > > > > > > > > 2. FHS dictates that /var/run must be cleaned on boot, this > > > > ensures that a stale freeze status file will be removed on boot > > > > > > > > Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> > > > > --- > > > > qemu-ga.c | 4 ++-- > > > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > > > > > diff --git a/qemu-ga.c b/qemu-ga.c > > > > index b747470..daeaea5 100644 > > > > --- a/qemu-ga.c > > > > +++ b/qemu-ga.c > > > > @@ -40,8 +40,8 @@ > > > > #else > > > > #define QGA_VIRTIO_PATH_DEFAULT "\\\\.\\Global\\org.qemu.guest_agent.0" > > > > #endif > > > > -#define QGA_PIDFILE_DEFAULT "/var/run/qemu-ga.pid" > > > > -#define QGA_STATEDIR_DEFAULT "/tmp" > > > > +#define QGA_STATEDIR_DEFAULT CONFIG_QEMU_LOCALSTATEDIR "/run" > > > > +#define QGA_PIDFILE_DEFAULT QGA_STATEDIR_DEFAULT "/qemu-ga.pid" > > > > > > Just to confirm, in configure we have: > > > > > > echo "qemu_localstatedir=$local_statedir" >> $config_host_mak > > > > > > Is there some magic that generates a CONFIG_QEMU_LOCALSTATEDIR with the > > > same value? If so: > > > > Yes, that's done by scripts/create_config > > > > > Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> > > > > Btw, is this going through your tree? > > Yup, was planning on sending a pull tomorrow after some basic testing. > Same for the standalone pidfile fix-up. Ok! Please, I didn't mean to hurry you up, just wanted to check we wouldn't deadlock waiting for each other :) > > > > > > > > > > #define QGA_SENTINEL_BYTE 0xFF > > > > > > > > struct GAState { > > > > -- > > > > 1.7.12.315.g682ce8b > > > > > > > > > >
On Thu, Oct 04, 2012 at 02:48:38PM -0300, Luiz Capitulino wrote: > On Thu, 4 Oct 2012 12:37:55 -0500 > Michael Roth <mdroth@linux.vnet.ibm.com> wrote: > > > On Thu, Oct 04, 2012 at 12:50:15PM -0300, Luiz Capitulino wrote: > > > On Thu, 4 Oct 2012 10:47:06 -0500 > > > Michael Roth <mdroth@linux.vnet.ibm.com> wrote: > > > > > > > On Wed, Oct 03, 2012 at 06:35:58PM -0300, Luiz Capitulino wrote: > > > > > Has the side effect of changing the default directory used to > > > > > save the freeze status file from /tmp to ${prefix}/var/run. > > > > > > > > > > This is a beneficial change for two reasons: > > > > > > > > > > 1. FHS states that programs must not assume that files in /tmp will > > > > > still exist between invocations of the program. This defeats > > > > > the purpose of the freeze status file > > > > > > > > > > 2. FHS dictates that /var/run must be cleaned on boot, this > > > > > ensures that a stale freeze status file will be removed on boot > > > > > > > > > > Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> > > > > > --- > > > > > qemu-ga.c | 4 ++-- > > > > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > > > > > > > diff --git a/qemu-ga.c b/qemu-ga.c > > > > > index b747470..daeaea5 100644 > > > > > --- a/qemu-ga.c > > > > > +++ b/qemu-ga.c > > > > > @@ -40,8 +40,8 @@ > > > > > #else > > > > > #define QGA_VIRTIO_PATH_DEFAULT "\\\\.\\Global\\org.qemu.guest_agent.0" > > > > > #endif > > > > > -#define QGA_PIDFILE_DEFAULT "/var/run/qemu-ga.pid" > > > > > -#define QGA_STATEDIR_DEFAULT "/tmp" > > > > > +#define QGA_STATEDIR_DEFAULT CONFIG_QEMU_LOCALSTATEDIR "/run" > > > > > +#define QGA_PIDFILE_DEFAULT QGA_STATEDIR_DEFAULT "/qemu-ga.pid" > > > > > > > > Just to confirm, in configure we have: > > > > > > > > echo "qemu_localstatedir=$local_statedir" >> $config_host_mak > > > > > > > > Is there some magic that generates a CONFIG_QEMU_LOCALSTATEDIR with the > > > > same value? If so: > > > > > > Yes, that's done by scripts/create_config > > > > > > > Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> > > > > > > Btw, is this going through your tree? > > > > Yup, was planning on sending a pull tomorrow after some basic testing. > > Same for the standalone pidfile fix-up. > > Ok! Please, I didn't mean to hurry you up, just wanted to check we wouldn't > deadlock waiting for each other :) Understood; no worries :) Patches seem pretty straightforward and the qemu-ga queue isn't exactly overflowing atm so I didn't see any reason to sit on these for too long. > > > > > > > > > > > > > > > #define QGA_SENTINEL_BYTE 0xFF > > > > > > > > > > struct GAState { > > > > > -- > > > > > 1.7.12.315.g682ce8b > > > > > > > > > > > > > > >
diff --git a/qemu-ga.c b/qemu-ga.c index b747470..daeaea5 100644 --- a/qemu-ga.c +++ b/qemu-ga.c @@ -40,8 +40,8 @@ #else #define QGA_VIRTIO_PATH_DEFAULT "\\\\.\\Global\\org.qemu.guest_agent.0" #endif -#define QGA_PIDFILE_DEFAULT "/var/run/qemu-ga.pid" -#define QGA_STATEDIR_DEFAULT "/tmp" +#define QGA_STATEDIR_DEFAULT CONFIG_QEMU_LOCALSTATEDIR "/run" +#define QGA_PIDFILE_DEFAULT QGA_STATEDIR_DEFAULT "/qemu-ga.pid" #define QGA_SENTINEL_BYTE 0xFF struct GAState {
Has the side effect of changing the default directory used to save the freeze status file from /tmp to ${prefix}/var/run. This is a beneficial change for two reasons: 1. FHS states that programs must not assume that files in /tmp will still exist between invocations of the program. This defeats the purpose of the freeze status file 2. FHS dictates that /var/run must be cleaned on boot, this ensures that a stale freeze status file will be removed on boot Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> --- qemu-ga.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)