new file mode 100644
@@ -0,0 +1,130 @@
+/*
+ * Generic PKUnity SoC machine and board descriptor
+ *
+ * Copyright (C) 2010-2012 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation, or any later version.
+ * See the COPYING file in the top-level directory.
+ */
+#include "console.h"
+#include "elf.h"
+#include "exec-memory.h"
+#include "../sysbus.h"
+#include "../boards.h"
+#include "../loader.h"
+#include "../pc.h"
+
+#undef DEBUG_PUV3
+#include "puv3.h"
+
+#define KERNEL_LOAD_ADDR 0x03000000
+#define KERNEL_MAX_SIZE 0x00800000 /* Just a guess */
+
+static void puv3_intc_cpu_handler(void *opaque, int irq, int level)
+{
+ CPUUniCore32State *env = (CPUUniCore32State *)opaque;
+
+ assert(irq == 0);
+ if (level) {
+ cpu_interrupt(env, CPU_INTERRUPT_HARD);
+ } else {
+ cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
+ }
+}
+
+static void puv3_soc_init(CPUUniCore32State *env)
+{
+ qemu_irq *cpu_intc, irqs[PUV3_IRQS_NR];
+ DeviceState *dev;
+ MemoryRegion *i8042 = g_new(MemoryRegion, 1);
+ int i;
+
+ /* Initialize interrupt controller */
+ cpu_intc = qemu_allocate_irqs(puv3_intc_cpu_handler, env, 1);
+ dev = sysbus_create_simple("puv3_intc", PUV3_INTC_BASE, *cpu_intc);
+ for (i = 0; i < PUV3_IRQS_NR; i++) {
+ irqs[i] = qdev_get_gpio_in(dev, i);
+ }
+
+ /* Initialize minimal necessary devices for kernel booting */
+ sysbus_create_simple("puv3_pm", PUV3_PM_BASE, NULL);
+ sysbus_create_simple("puv3_dma", PUV3_DMA_BASE, NULL);
+ sysbus_create_simple("puv3_ost", PUV3_OST_BASE, irqs[PUV3_IRQS_OST0]);
+ sysbus_create_varargs("puv3_gpio", PUV3_GPIO_BASE,
+ irqs[PUV3_IRQS_GPIOLOW0], irqs[PUV3_IRQS_GPIOLOW1],
+ irqs[PUV3_IRQS_GPIOLOW2], irqs[PUV3_IRQS_GPIOLOW3],
+ irqs[PUV3_IRQS_GPIOLOW4], irqs[PUV3_IRQS_GPIOLOW5],
+ irqs[PUV3_IRQS_GPIOLOW6], irqs[PUV3_IRQS_GPIOLOW7],
+ irqs[PUV3_IRQS_GPIOHIGH], NULL);
+
+ /* Keyboard (i8042), mouse disabled for nographic */
+ i8042_mm_init(irqs[PUV3_IRQS_PS2_KBD], NULL, i8042, PUV3_REGS_OFFSET, 4);
+ memory_region_add_subregion(get_system_memory(), PUV3_PS2_BASE, i8042);
+}
+
+static void puv3_board_init(CPUUniCore32State *env, ram_addr_t ram_size)
+{
+ MemoryRegion *ram_memory = g_new(MemoryRegion, 1);
+
+ /* SDRAM at address zero. */
+ memory_region_init_ram(ram_memory, "puv3.ram", ram_size);
+ vmstate_register_ram_global(ram_memory);
+ memory_region_add_subregion(get_system_memory(), 0, ram_memory);
+}
+
+static void puv3_load_kernel(const char *kernel_filename)
+{
+ int size;
+
+ assert(kernel_filename != NULL);
+
+ /* only zImage format supported */
+ size = load_image_targphys(kernel_filename, KERNEL_LOAD_ADDR,
+ KERNEL_MAX_SIZE);
+ if (size < 0) {
+ hw_error("Load kernel error: '%s'\n", kernel_filename);
+ }
+
+ /* cheat curses that we have a graphic console, only under ocd console */
+ graphic_console_init(NULL, NULL, NULL, NULL, NULL);
+}
+
+static void puv3_init(ram_addr_t ram_size, const char *boot_device,
+ const char *kernel_filename, const char *kernel_cmdline,
+ const char *initrd_filename, const char *cpu_model)
+{
+ CPUUniCore32State *env;
+
+ if (initrd_filename) {
+ hw_error("Please use kernel built-in initramdisk.\n");
+ }
+
+ if (!cpu_model) {
+ cpu_model = "UniCore-II";
+ }
+
+ env = cpu_init(cpu_model);
+ if (!env) {
+ hw_error("Unable to find CPU definition\n");
+ }
+
+ puv3_soc_init(env);
+ puv3_board_init(env, ram_size);
+ puv3_load_kernel(kernel_filename);
+}
+
+static QEMUMachine puv3_machine = {
+ .name = "puv3",
+ .desc = "PKUnity Version-3 based on UniCore32",
+ .init = puv3_init,
+ .use_scsi = 0,
+};
+
+static void puv3_machine_init(void)
+{
+ qemu_register_machine(&puv3_machine);
+}
+
+machine_init(puv3_machine_init);
new file mode 100644
@@ -0,0 +1,49 @@
+/*
+ * Misc PKUnity SoC declarations
+ *
+ * Copyright (C) 2010-2012 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation, or any later version.
+ * See the COPYING file in the top-level directory.
+ */
+#ifndef __PUV3_H__
+#define __PUV3_H__
+
+#define PUV3_REGS_OFFSET (TARGET_PAGE_SIZE)
+
+/* PKUnity System bus (AHB): 0xc0000000 - 0xedffffff (640MB) */
+#define PUV3_DMA_BASE (0xc0200000) /* AHB-4 */
+
+/* PKUnity Peripheral bus (APB): 0xee000000 - 0xefffffff (128MB) */
+#define PUV3_GPIO_BASE (0xee500000) /* APB-5 */
+#define PUV3_INTC_BASE (0xee600000) /* APB-6 */
+#define PUV3_OST_BASE (0xee800000) /* APB-8 */
+#define PUV3_PM_BASE (0xeea00000) /* APB-10 */
+#define PUV3_PS2_BASE (0xeeb00000) /* APB-11 */
+
+/* Hardware interrupts */
+#define PUV3_IRQS_NR (32)
+
+#define PUV3_IRQS_GPIOLOW0 (0)
+#define PUV3_IRQS_GPIOLOW1 (1)
+#define PUV3_IRQS_GPIOLOW2 (2)
+#define PUV3_IRQS_GPIOLOW3 (3)
+#define PUV3_IRQS_GPIOLOW4 (4)
+#define PUV3_IRQS_GPIOLOW5 (5)
+#define PUV3_IRQS_GPIOLOW6 (6)
+#define PUV3_IRQS_GPIOLOW7 (7)
+#define PUV3_IRQS_GPIOHIGH (8)
+#define PUV3_IRQS_PS2_KBD (22)
+#define PUV3_IRQS_PS2_AUX (23)
+#define PUV3_IRQS_OST0 (26)
+
+/* All puv3_*.c use DPRINTF for debug. */
+#ifdef DEBUG_PUV3
+#define DPRINTF(fmt, ...) printf("%s: " fmt , __func__, ## __VA_ARGS__)
+#else
+#define DPRINTF(fmt, ...) do {} while (0)
+#endif
+
+#endif /* !__PUV3_H__ */
new file mode 100644
@@ -0,0 +1,109 @@
+/*
+ * DMA device simulation in PKUnity SoC
+ *
+ * Copyright (C) 2010-2012 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation, or any later version.
+ * See the COPYING file in the top-level directory.
+ */
+#include "../hw.h"
+#include "../sysbus.h"
+
+#undef DEBUG_PUV3
+#include "puv3.h"
+
+#define PUV3_DMA_CH_NR (6)
+#define PUV3_DMA_CH_MASK (0xff)
+#define PUV3_DMA_CH(offset) ((offset) >> 8)
+
+typedef struct {
+ SysBusDevice busdev;
+ MemoryRegion iomem;
+ uint32_t reg_CFG[PUV3_DMA_CH_NR];
+} puv3_dma_t;
+
+static uint64_t puv3_dma_read(void *opaque, target_phys_addr_t offset,
+ unsigned size)
+{
+ puv3_dma_t *s = (puv3_dma_t *) opaque;
+ uint32_t ret;
+
+ assert(PUV3_DMA_CH(offset) < PUV3_DMA_CH_NR);
+
+ switch (offset & PUV3_DMA_CH_MASK) {
+ case 0x10:
+ ret = s->reg_CFG[PUV3_DMA_CH(offset)];
+ break;
+ default:
+ hw_error("%s: Bad offset 0x%x\n", __func__, offset);
+ }
+ DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
+
+ return ret;
+}
+
+static void puv3_dma_write(void *opaque, target_phys_addr_t offset,
+ uint64_t value, unsigned size)
+{
+ puv3_dma_t *s = (puv3_dma_t *) opaque;
+
+ assert(PUV3_DMA_CH(offset) < PUV3_DMA_CH_NR);
+
+ switch (offset & PUV3_DMA_CH_MASK) {
+ case 0x10:
+ s->reg_CFG[PUV3_DMA_CH(offset)] = value;
+ break;
+ default:
+ hw_error("%s: Bad offset 0x%x\n", __func__, offset);
+ }
+ DPRINTF("offset 0x%x, value 0x%x\n", offset, value);
+}
+
+static const MemoryRegionOps puv3_dma_ops = {
+ .read = puv3_dma_read,
+ .write = puv3_dma_write,
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static int puv3_dma_init(SysBusDevice *dev)
+{
+ puv3_dma_t *s = FROM_SYSBUS(puv3_dma_t, dev);
+ int i;
+
+ for (i = 0; i < PUV3_DMA_CH_NR; i++) {
+ s->reg_CFG[i] = 0x0;
+ }
+
+ memory_region_init_io(&s->iomem, &puv3_dma_ops, s, "puv3_dma",
+ PUV3_REGS_OFFSET);
+ sysbus_init_mmio(dev, &s->iomem);
+
+ return 0;
+}
+
+static void puv3_dma_class_init(ObjectClass *klass, void *data)
+{
+ SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
+
+ sdc->init = puv3_dma_init;
+}
+
+static TypeInfo puv3_dma_info = {
+ .name = "puv3_dma",
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(puv3_dma_t),
+ .class_init = puv3_dma_class_init,
+};
+
+static void puv3_dma_register_type(void)
+{
+ type_register_static(&puv3_dma_info);
+}
+
+type_init(puv3_dma_register_type)
new file mode 100644
@@ -0,0 +1,141 @@
+/*
+ * GPIO device simulation in PKUnity SoC
+ *
+ * Copyright (C) 2010-2012 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation, or any later version.
+ * See the COPYING file in the top-level directory.
+ */
+#include "../hw.h"
+#include "../sysbus.h"
+
+#undef DEBUG_PUV3
+#include "puv3.h"
+
+typedef struct {
+ SysBusDevice busdev;
+ MemoryRegion iomem;
+ qemu_irq irq[9];
+
+ uint32_t reg_GPLR;
+ uint32_t reg_GPDR;
+ uint32_t reg_GPIR;
+} puv3_gpio_t;
+
+static uint64_t puv3_gpio_read(void *opaque, target_phys_addr_t offset,
+ unsigned size)
+{
+ puv3_gpio_t *s = (puv3_gpio_t *) opaque;
+ uint32_t ret;
+
+ switch (offset) {
+ case 0x00:
+ ret = s->reg_GPLR;
+ break;
+ case 0x04:
+ ret = s->reg_GPDR;
+ break;
+ case 0x20:
+ ret = s->reg_GPIR;
+ break;
+ default:
+ hw_error("%s: Bad offset 0x%x\n", __func__, offset);
+ }
+ DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
+
+ return ret;
+}
+
+static void puv3_gpio_write(void *opaque, target_phys_addr_t offset,
+ uint64_t value, unsigned size)
+{
+ puv3_gpio_t *s = (puv3_gpio_t *) opaque;
+
+ DPRINTF("offset 0x%x, value 0x%x\n", offset, value);
+ switch (offset) {
+ case 0x04:
+ s->reg_GPDR = value;
+ break;
+ case 0x08:
+ if (s->reg_GPDR & value) {
+ s->reg_GPLR |= value;
+ } else {
+ hw_error("write gpio input port error!");
+ }
+ break;
+ case 0x0c:
+ if (s->reg_GPDR & value) {
+ s->reg_GPLR &= ~value;
+ } else {
+ hw_error("write gpio input port error!");
+ }
+ break;
+ case 0x10: /* GRER */
+ case 0x14: /* GFER */
+ case 0x18: /* GEDR */
+ break;
+ case 0x20: /* GPIR */
+ s->reg_GPIR = value;
+ break;
+ default:
+ hw_error("%s: Bad offset 0x%x\n", __func__, offset);
+ }
+}
+
+static const MemoryRegionOps puv3_gpio_ops = {
+ .read = puv3_gpio_read,
+ .write = puv3_gpio_write,
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static int puv3_gpio_init(SysBusDevice *dev)
+{
+ puv3_gpio_t *s = FROM_SYSBUS(puv3_gpio_t, dev);
+
+ s->reg_GPLR = 0;
+ s->reg_GPDR = 0;
+
+ /* FIXME: these irqs not handled yet */
+ sysbus_init_irq(dev, &s->irq[PUV3_IRQS_GPIOLOW0]);
+ sysbus_init_irq(dev, &s->irq[PUV3_IRQS_GPIOLOW1]);
+ sysbus_init_irq(dev, &s->irq[PUV3_IRQS_GPIOLOW2]);
+ sysbus_init_irq(dev, &s->irq[PUV3_IRQS_GPIOLOW3]);
+ sysbus_init_irq(dev, &s->irq[PUV3_IRQS_GPIOLOW4]);
+ sysbus_init_irq(dev, &s->irq[PUV3_IRQS_GPIOLOW5]);
+ sysbus_init_irq(dev, &s->irq[PUV3_IRQS_GPIOLOW6]);
+ sysbus_init_irq(dev, &s->irq[PUV3_IRQS_GPIOLOW7]);
+ sysbus_init_irq(dev, &s->irq[PUV3_IRQS_GPIOHIGH]);
+
+ memory_region_init_io(&s->iomem, &puv3_gpio_ops, s, "puv3_gpio",
+ PUV3_REGS_OFFSET);
+ sysbus_init_mmio(dev, &s->iomem);
+
+ return 0;
+}
+
+static void puv3_gpio_class_init(ObjectClass *klass, void *data)
+{
+ SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
+
+ sdc->init = puv3_gpio_init;
+}
+
+static TypeInfo puv3_gpio_info = {
+ .name = "puv3_gpio",
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(puv3_gpio_t),
+ .class_init = puv3_gpio_class_init,
+};
+
+static void puv3_gpio_register_type(void)
+{
+ type_register_static(&puv3_gpio_info);
+}
+
+type_init(puv3_gpio_register_type)
new file mode 100644
@@ -0,0 +1,135 @@
+/*
+ * INTC device simulation in PKUnity SoC
+ *
+ * Copyright (C) 2010-2012 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation, or any later version.
+ * See the COPYING file in the top-level directory.
+ */
+#include "../sysbus.h"
+
+#undef DEBUG_PUV3
+#include "puv3.h"
+
+typedef struct puv3_intc_t {
+ SysBusDevice busdev;
+ MemoryRegion iomem;
+ qemu_irq parent_irq;
+
+ uint32_t reg_ICMR;
+ uint32_t reg_ICPR;
+} puv3_intc_t;
+
+/* Update interrupt status after enabled or pending bits have been changed. */
+static void puv3_intc_update(puv3_intc_t *s)
+{
+ if (s->reg_ICMR & s->reg_ICPR) {
+ qemu_irq_raise(s->parent_irq);
+ } else {
+ qemu_irq_lower(s->parent_irq);
+ }
+}
+
+/* Process a change in an external INTC input. */
+static void puv3_intc_handler(void *opaque, int irq, int level)
+{
+ puv3_intc_t *s = (puv3_intc_t *)opaque;
+
+ DPRINTF("irq 0x%x, level 0x%x\n", irq, level);
+ if (level) {
+ s->reg_ICPR |= (1 << irq);
+ } else {
+ s->reg_ICPR &= ~(1 << irq);
+ }
+ puv3_intc_update(s);
+}
+
+static uint64_t puv3_intc_read(void *opaque, target_phys_addr_t offset,
+ unsigned size)
+{
+ puv3_intc_t *s = (puv3_intc_t *)opaque;
+ uint32_t ret = 0;
+
+ switch (offset) {
+ case 0x04: /* INTC_ICMR */
+ ret = s->reg_ICMR;
+ break;
+ case 0x0c: /* INTC_ICIP */
+ ret = s->reg_ICPR; /* the same value with ICPR */
+ break;
+ default:
+ hw_error("puv3_intc_read: Bad offset %x\n", (int)offset);
+ }
+ DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
+ return ret;
+}
+
+static void puv3_intc_write(void *opaque, target_phys_addr_t offset,
+ uint64_t value, unsigned size)
+{
+ puv3_intc_t *s = (puv3_intc_t *)opaque;
+
+ DPRINTF("offset 0x%x, value 0x%x\n", offset, value);
+ switch (offset) {
+ case 0x00: /* INTC_ICLR */
+ case 0x14: /* INTC_ICCR */
+ break;
+ case 0x04: /* INTC_ICMR */
+ s->reg_ICMR = value;
+ break;
+ default:
+ hw_error("puv3_intc_write: Bad offset 0x%x\n", (int)offset);
+ return;
+ }
+ puv3_intc_update(s);
+}
+
+static const MemoryRegionOps puv3_intc_ops = {
+ .read = puv3_intc_read,
+ .write = puv3_intc_write,
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static int puv3_intc_init(SysBusDevice *dev)
+{
+ puv3_intc_t *s = FROM_SYSBUS(puv3_intc_t, dev);
+
+ qdev_init_gpio_in(&s->busdev.qdev, puv3_intc_handler, PUV3_IRQS_NR);
+ sysbus_init_irq(&s->busdev, &s->parent_irq);
+
+ s->reg_ICMR = 0;
+ s->reg_ICPR = 0;
+
+ memory_region_init_io(&s->iomem, &puv3_intc_ops, s, "puv3_intc",
+ PUV3_REGS_OFFSET);
+ sysbus_init_mmio(dev, &s->iomem);
+
+ return 0;
+}
+
+static void puv3_intc_class_init(ObjectClass *klass, void *data)
+{
+ SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
+
+ sdc->init = puv3_intc_init;
+}
+
+static TypeInfo puv3_intc_info = {
+ .name = "puv3_intc",
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(puv3_intc_t),
+ .class_init = puv3_intc_class_init,
+};
+
+static void puv3_intc_register_type(void)
+{
+ type_register_static(&puv3_intc_info);
+}
+
+type_init(puv3_intc_register_type)
new file mode 100644
@@ -0,0 +1,151 @@
+/*
+ * OSTimer device simulation in PKUnity SoC
+ *
+ * Copyright (C) 2010-2012 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation, or any later version.
+ * See the COPYING file in the top-level directory.
+ */
+#include "../sysbus.h"
+#include "../ptimer.h"
+
+#undef DEBUG_PUV3
+#include "puv3.h"
+
+/* puv3 ostimer implementation. */
+typedef struct {
+ SysBusDevice busdev;
+ MemoryRegion iomem;
+ QEMUBH *bh;
+ qemu_irq irq;
+ ptimer_state *ptimer;
+
+ uint32_t reg_OSMR0;
+ uint32_t reg_OSCR;
+ uint32_t reg_OSSR;
+ uint32_t reg_OIER;
+} puv3_ost_t;
+
+static uint64_t puv3_ost_read(void *opaque, target_phys_addr_t offset,
+ unsigned size)
+{
+ puv3_ost_t *s = (puv3_ost_t *)opaque;
+ uint32_t ret = 0;
+
+ switch (offset) {
+ case 0x10: /* Counter Register */
+ ret = s->reg_OSMR0 - (uint32_t)ptimer_get_count(s->ptimer);
+ break;
+ case 0x14: /* Status Register */
+ ret = s->reg_OSSR;
+ break;
+ case 0x1c: /* Interrupt Enable Register */
+ ret = s->reg_OIER;
+ break;
+ default:
+ hw_error("puv3_ost_read: Bad offset %x\n", (int)offset);
+ }
+ DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
+ return ret;
+}
+
+static void puv3_ost_write(void *opaque, target_phys_addr_t offset,
+ uint64_t value, unsigned size)
+{
+ puv3_ost_t *s = (puv3_ost_t *)opaque;
+
+ DPRINTF("offset 0x%x, value 0x%x\n", offset, value);
+ switch (offset) {
+ case 0x00: /* Match Register 0 */
+ s->reg_OSMR0 = value;
+ if (s->reg_OSMR0 > s->reg_OSCR) {
+ ptimer_set_count(s->ptimer, s->reg_OSMR0 - s->reg_OSCR);
+ } else {
+ ptimer_set_count(s->ptimer, s->reg_OSMR0 +
+ (0xffffffff - s->reg_OSCR));
+ }
+ ptimer_run(s->ptimer, 2);
+ break;
+ case 0x14: /* Status Register */
+ assert(value == 0);
+ if (s->reg_OSSR) {
+ s->reg_OSSR = value;
+ qemu_irq_lower(s->irq);
+ }
+ break;
+ case 0x1c: /* Interrupt Enable Register */
+ s->reg_OIER = value;
+ break;
+ default:
+ hw_error("puv3_ost_write: Bad offset %x\n", (int)offset);
+ }
+}
+
+static const MemoryRegionOps puv3_ost_ops = {
+ .read = puv3_ost_read,
+ .write = puv3_ost_write,
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void puv3_ost_tick(void *opaque)
+{
+ puv3_ost_t *s = (puv3_ost_t *)opaque;
+
+ DPRINTF("ost hit when ptimer counter from 0x%x to 0x%x!\n",
+ s->reg_OSCR, s->reg_OSMR0);
+
+ s->reg_OSCR = s->reg_OSMR0;
+ if (s->reg_OIER) {
+ s->reg_OSSR = 1;
+ qemu_irq_raise(s->irq);
+ }
+}
+
+static int puv3_ost_init(SysBusDevice *dev)
+{
+ puv3_ost_t *s = FROM_SYSBUS(puv3_ost_t, dev);
+
+ s->reg_OIER = 0;
+ s->reg_OSSR = 0;
+ s->reg_OSMR0 = 0;
+ s->reg_OSCR = 0;
+
+ sysbus_init_irq(dev, &s->irq);
+
+ s->bh = qemu_bh_new(puv3_ost_tick, s);
+ s->ptimer = ptimer_init(s->bh);
+ ptimer_set_freq(s->ptimer, 50 * 1000 * 1000);
+
+ memory_region_init_io(&s->iomem, &puv3_ost_ops, s, "puv3_ost",
+ PUV3_REGS_OFFSET);
+ sysbus_init_mmio(dev, &s->iomem);
+
+ return 0;
+}
+
+static void puv3_ost_class_init(ObjectClass *klass, void *data)
+{
+ SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
+
+ sdc->init = puv3_ost_init;
+}
+
+static TypeInfo puv3_ost_info = {
+ .name = "puv3_ost",
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(puv3_ost_t),
+ .class_init = puv3_ost_class_init,
+};
+
+static void puv3_ost_register_type(void)
+{
+ type_register_static(&puv3_ost_info);
+}
+
+type_init(puv3_ost_register_type)
new file mode 100644
@@ -0,0 +1,148 @@
+/*
+ * Power Management device simulation in PKUnity SoC
+ *
+ * Copyright (C) 2010-2012 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation, or any later version.
+ * See the COPYING file in the top-level directory.
+ */
+#include "../hw.h"
+#include "../sysbus.h"
+
+#undef DEBUG_PUV3
+#include "puv3.h"
+
+typedef struct {
+ SysBusDevice busdev;
+ MemoryRegion iomem;
+
+ uint32_t reg_PMCR;
+ uint32_t reg_PCGR;
+ uint32_t reg_PLL_SYS_CFG;
+ uint32_t reg_PLL_DDR_CFG;
+ uint32_t reg_PLL_VGA_CFG;
+ uint32_t reg_DIVCFG;
+} puv3_pm_t;
+
+static uint64_t puv3_pm_read(void *opaque, target_phys_addr_t offset,
+ unsigned size)
+{
+ puv3_pm_t *s = (puv3_pm_t *) opaque;
+ uint32_t ret;
+
+ switch (offset) {
+ case 0x14:
+ ret = s->reg_PCGR;
+ break;
+ case 0x18:
+ ret = s->reg_PLL_SYS_CFG;
+ break;
+ case 0x1c:
+ ret = s->reg_PLL_DDR_CFG;
+ break;
+ case 0x20:
+ ret = s->reg_PLL_VGA_CFG;
+ break;
+ case 0x24:
+ ret = s->reg_DIVCFG;
+ break;
+ case 0x28: /* PLL SYS STATUS */
+ ret = 0x00002401;
+ break;
+ case 0x2c: /* PLL DDR STATUS */
+ ret = 0x00100c00;
+ break;
+ case 0x30: /* PLL VGA STATUS */
+ ret = 0x00003801;
+ break;
+ case 0x34: /* DIV STATUS */
+ ret = 0x22f52015;
+ break;
+ case 0x38: /* SW RESET */
+ ret = 0x0;
+ break;
+ case 0x44: /* PLL DFC DONE */
+ ret = 0x7;
+ break;
+ default:
+ hw_error("%s: Bad offset 0x%x\n", __func__, offset);
+ }
+ DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
+
+ return ret;
+}
+
+static void puv3_pm_write(void *opaque, target_phys_addr_t offset,
+ uint64_t value, unsigned size)
+{
+ puv3_pm_t *s = (puv3_pm_t *) opaque;
+
+ switch (offset) {
+ case 0x0:
+ s->reg_PMCR = value;
+ case 0x14:
+ s->reg_PCGR = value;
+ break;
+ case 0x18:
+ s->reg_PLL_SYS_CFG = value;
+ break;
+ case 0x1c:
+ s->reg_PLL_DDR_CFG = value;
+ break;
+ case 0x20:
+ s->reg_PLL_VGA_CFG = value;
+ break;
+ case 0x24:
+ case 0x38:
+ break;
+ default:
+ hw_error("%s: Bad offset 0x%x\n", __func__, offset);
+ }
+ DPRINTF("offset 0x%x, value 0x%x\n", offset, value);
+}
+
+static const MemoryRegionOps puv3_pm_ops = {
+ .read = puv3_pm_read,
+ .write = puv3_pm_write,
+ .impl = {
+ .min_access_size = 4,
+ .max_access_size = 4,
+ },
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static int puv3_pm_init(SysBusDevice *dev)
+{
+ puv3_pm_t *s = FROM_SYSBUS(puv3_pm_t, dev);
+
+ s->reg_PCGR = 0x0;
+
+ memory_region_init_io(&s->iomem, &puv3_pm_ops, s, "puv3_pm",
+ PUV3_REGS_OFFSET);
+ sysbus_init_mmio(dev, &s->iomem);
+
+ return 0;
+}
+
+static void puv3_pm_class_init(ObjectClass *klass, void *data)
+{
+ SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
+
+ sdc->init = puv3_pm_init;
+}
+
+static TypeInfo puv3_pm_info = {
+ .name = "puv3_pm",
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(puv3_pm_t),
+ .class_init = puv3_pm_class_init,
+};
+
+static void puv3_pm_register_type(void)
+{
+ type_register_static(&puv3_pm_info);
+}
+
+type_init(puv3_pm_register_type)
This patch only add minimal necessary system-control modules simulation for successfully kernel booting and busybox running. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> --- hw/pkunity/puv3.c | 130 +++++++++++++++++++++++++++++++++++++++++ hw/pkunity/puv3.h | 49 ++++++++++++++++ hw/pkunity/puv3_dma.c | 109 ++++++++++++++++++++++++++++++++++ hw/pkunity/puv3_gpio.c | 141 ++++++++++++++++++++++++++++++++++++++++++++ hw/pkunity/puv3_intc.c | 135 ++++++++++++++++++++++++++++++++++++++++++ hw/pkunity/puv3_ost.c | 151 ++++++++++++++++++++++++++++++++++++++++++++++++ hw/pkunity/puv3_pm.c | 148 +++++++++++++++++++++++++++++++++++++++++++++++ 7 files changed, 863 insertions(+), 0 deletions(-) create mode 100644 hw/pkunity/puv3.c create mode 100644 hw/pkunity/puv3.h create mode 100644 hw/pkunity/puv3_dma.c create mode 100644 hw/pkunity/puv3_gpio.c create mode 100644 hw/pkunity/puv3_intc.c create mode 100644 hw/pkunity/puv3_ost.c create mode 100644 hw/pkunity/puv3_pm.c