Message ID | 1332095353-19120-2-git-send-email-alevy@redhat.com |
---|---|
State | New |
Headers | show |
On Sun, 18 Mar 2012 19:29:09 +0100 Alon Levy <alevy@redhat.com> wrote: > Added: > > QERR_EINTR > QERR_EACCES > QERR_EEXIST > QERR_OPEN_FILE_EMFILE > QERR_ENOSPC > QERR_EPERM > QERR_READ_ONLY > QERR_ENOTDIR > QERR_EFBIG > > Signed-off-by: Alon Levy <alevy@redhat.com> > --- > qerror.c | 36 ++++++++++++++++++++++++++++++++++++ > qerror.h | 27 +++++++++++++++++++++++++++ > 2 files changed, 63 insertions(+) > > diff --git a/qerror.c b/qerror.c > index f55d435..4915939 100644 > --- a/qerror.c > +++ b/qerror.c > @@ -213,6 +213,42 @@ static const QErrorStringTable qerror_table[] = { > .desc = "Could not open '%(filename)'", > }, > { > + .error_fmt = QERR_EINTR, > + .desc = "Interrupted open of '%(filename)'", > + }, There are two problems here. First, the QERR_INTR macro doesn't have the filename argument, so this will crash. The second problem is that, I've talked to Anthony and EINTR should not be returned to clients, it should be handled intead. So, please handle it during write(). > + { > + .error_fmt = QERR_EACCES, > + .desc = "Cannot access file'", > + }, We already have QERR_PERMISSION_DENIED. > + { > + .error_fmt = QERR_EEXIST, > + .desc = "File already exists'", > + }, Can you use the description provided by man 3 errno? This is valid for all errors you're adding. > + { > + .error_fmt = QERR_OPEN_FILE_EMFILE, > + .desc = "Max open files when opening file'", > + }, > + { > + .error_fmt = QERR_ENOSPC, > + .desc = "No space left opening file'", > + }, > + { > + .error_fmt = QERR_EPERM, > + .desc = "Permission denied (EPERM) opening file'", > + }, > + { > + .error_fmt = QERR_READ_ONLY, > + .desc = "Read only filesystem opening file'", > + }, > + { > + .error_fmt = QERR_ENOTDIR, > + .desc = "Directory related error opening file'", > + }, > + { > + .error_fmt = QERR_EFBIG, > + .desc = "File too big opening'", > + }, > + { > .error_fmt = QERR_PERMISSION_DENIED, > .desc = "Insufficient permission to perform this operation", > }, > diff --git a/qerror.h b/qerror.h > index e26c635..ddc04e8 100644 > --- a/qerror.h > +++ b/qerror.h > @@ -181,6 +181,33 @@ QError *qobject_to_qerror(const QObject *obj); > #define QERR_OPEN_FILE_FAILED \ > "{ 'class': 'OpenFileFailed', 'data': { 'filename': %s } }" > > +#define QERR_OPEN_FILE_EMFILE \ > + "{ 'class': 'OpenFileEMFILE', 'data': {} }" > + > +#define QERR_EINTR \ > + "{ 'class': 'EINTR', 'data': {} }" > + > +#define QERR_EACCES \ > + "{ 'class': 'EACCES', 'data': {} }" > + > +#define QERR_EEXIST \ > + "{ 'class': 'EEXIST', 'data': {} }" We use more descriptive names instead of using the errno name. Like AlreadyExists. Please fix it for errors you adding. > + > +#define QERR_ENOSPC \ > + "{ 'class': 'ENOSPC', 'data': {} }" > + > +#define QERR_EPERM \ > + "{ 'class': 'EPERM', 'data': {} }" > + > +#define QERR_READ_ONLY \ > + "{ 'class': 'ReadOnly', 'data': {} }" > + > +#define QERR_ENOTDIR \ > + "{ 'class': 'ENOTDIR', 'data': {} }" > + > +#define QERR_EFBIG \ > + "{ 'class': 'EFBIG', 'data': {} }" > + > #define QERR_PERMISSION_DENIED \ > "{ 'class': 'PermissionDenied', 'data': {} }" >
On Fri, Mar 23, 2012 at 11:21:25AM -0300, Luiz Capitulino wrote: > On Sun, 18 Mar 2012 19:29:09 +0100 > Alon Levy <alevy@redhat.com> wrote: > > > Added: > > > > QERR_EINTR > > QERR_EACCES > > QERR_EEXIST > > QERR_OPEN_FILE_EMFILE > > QERR_ENOSPC > > QERR_EPERM > > QERR_READ_ONLY > > QERR_ENOTDIR > > QERR_EFBIG > > > > Signed-off-by: Alon Levy <alevy@redhat.com> > > --- > > qerror.c | 36 ++++++++++++++++++++++++++++++++++++ > > qerror.h | 27 +++++++++++++++++++++++++++ > > 2 files changed, 63 insertions(+) > > > > diff --git a/qerror.c b/qerror.c > > index f55d435..4915939 100644 > > --- a/qerror.c > > +++ b/qerror.c > > @@ -213,6 +213,42 @@ static const QErrorStringTable qerror_table[] = { > > .desc = "Could not open '%(filename)'", > > }, > > { > > + .error_fmt = QERR_EINTR, > > + .desc = "Interrupted open of '%(filename)'", > > + }, > > There are two problems here. First, the QERR_INTR macro doesn't have the > filename argument, so this will crash. Ugh, missed that. > > The second problem is that, I've talked to Anthony and EINTR should not > be returned to clients, it should be handled intead. So, please handle it > during write(). > > > + { > > + .error_fmt = QERR_EACCES, > > + .desc = "Cannot access file'", > > + }, > > We already have QERR_PERMISSION_DENIED. > So you want to have both error conditions (EACCESS and EPERM) translated to the more generic PERMISSION_DENIED? This means that information is lost when looking at the error value. The main thing would be to show the filename, which we will do later as you said, so fine I guess. > > + { > > + .error_fmt = QERR_EEXIST, > > + .desc = "File already exists'", > > + }, > > Can you use the description provided by man 3 errno? This is valid for all > errors you're adding. It's a bit lengthy. But sure. > > > + { > > + .error_fmt = QERR_OPEN_FILE_EMFILE, > > + .desc = "Max open files when opening file'", > > + }, > > + { > > + .error_fmt = QERR_ENOSPC, > > + .desc = "No space left opening file'", > > + }, > > + { > > + .error_fmt = QERR_EPERM, > > + .desc = "Permission denied (EPERM) opening file'", > > + }, > > + { > > + .error_fmt = QERR_READ_ONLY, > > + .desc = "Read only filesystem opening file'", > > + }, > > + { > > + .error_fmt = QERR_ENOTDIR, > > + .desc = "Directory related error opening file'", > > + }, > > + { > > + .error_fmt = QERR_EFBIG, > > + .desc = "File too big opening'", > > + }, > > + { > > .error_fmt = QERR_PERMISSION_DENIED, > > .desc = "Insufficient permission to perform this operation", > > }, > > diff --git a/qerror.h b/qerror.h > > index e26c635..ddc04e8 100644 > > --- a/qerror.h > > +++ b/qerror.h > > @@ -181,6 +181,33 @@ QError *qobject_to_qerror(const QObject *obj); > > #define QERR_OPEN_FILE_FAILED \ > > "{ 'class': 'OpenFileFailed', 'data': { 'filename': %s } }" > > > > +#define QERR_OPEN_FILE_EMFILE \ > > + "{ 'class': 'OpenFileEMFILE', 'data': {} }" > > + > > +#define QERR_EINTR \ > > + "{ 'class': 'EINTR', 'data': {} }" > > + > > +#define QERR_EACCES \ > > + "{ 'class': 'EACCES', 'data': {} }" > > + > > +#define QERR_EEXIST \ > > + "{ 'class': 'EEXIST', 'data': {} }" > > We use more descriptive names instead of using the errno name. Like AlreadyExists. > Please fix it for errors you adding. Actually this was on purpose, to allow someone catching it to know it originated in a failed systemcall. So your way the catcher would have to go read the source (or hopefully I'll choose similar names). > > > + > > +#define QERR_ENOSPC \ > > + "{ 'class': 'ENOSPC', 'data': {} }" > > + > > +#define QERR_EPERM \ > > + "{ 'class': 'EPERM', 'data': {} }" > > + > > +#define QERR_READ_ONLY \ > > + "{ 'class': 'ReadOnly', 'data': {} }" > > + > > +#define QERR_ENOTDIR \ > > + "{ 'class': 'ENOTDIR', 'data': {} }" > > + > > +#define QERR_EFBIG \ > > + "{ 'class': 'EFBIG', 'data': {} }" > > + > > #define QERR_PERMISSION_DENIED \ > > "{ 'class': 'PermissionDenied', 'data': {} }" > > > >
On Fri, 23 Mar 2012 21:53:03 +0200 Alon Levy <alevy@redhat.com> wrote: > On Fri, Mar 23, 2012 at 11:21:25AM -0300, Luiz Capitulino wrote: > > On Sun, 18 Mar 2012 19:29:09 +0100 > > Alon Levy <alevy@redhat.com> wrote: > > > > > Added: > > > > > > QERR_EINTR > > > QERR_EACCES > > > QERR_EEXIST > > > QERR_OPEN_FILE_EMFILE > > > QERR_ENOSPC > > > QERR_EPERM > > > QERR_READ_ONLY > > > QERR_ENOTDIR > > > QERR_EFBIG > > > > > > Signed-off-by: Alon Levy <alevy@redhat.com> > > > --- > > > qerror.c | 36 ++++++++++++++++++++++++++++++++++++ > > > qerror.h | 27 +++++++++++++++++++++++++++ > > > 2 files changed, 63 insertions(+) > > > > > > diff --git a/qerror.c b/qerror.c > > > index f55d435..4915939 100644 > > > --- a/qerror.c > > > +++ b/qerror.c > > > @@ -213,6 +213,42 @@ static const QErrorStringTable qerror_table[] = { > > > .desc = "Could not open '%(filename)'", > > > }, > > > { > > > + .error_fmt = QERR_EINTR, > > > + .desc = "Interrupted open of '%(filename)'", > > > + }, > > > > There are two problems here. First, the QERR_INTR macro doesn't have the > > filename argument, so this will crash. > > Ugh, missed that. > > > > > The second problem is that, I've talked to Anthony and EINTR should not > > be returned to clients, it should be handled intead. So, please handle it > > during write(). > > > > > + { > > > + .error_fmt = QERR_EACCES, > > > + .desc = "Cannot access file'", > > > + }, > > > > We already have QERR_PERMISSION_DENIED. > > > > So you want to have both error conditions (EACCESS and EPERM) translated > to the more generic PERMISSION_DENIED? I had forgotten about our discussion about this. You could add InvalidAccess, although I think we already use QERR_PERMISSION_DENIED as EACCESS... > This means that information is > lost when looking at the error value. The main thing would be to show > the filename, which we will do later as you said, so fine I guess. > > > > + { > > > + .error_fmt = QERR_EEXIST, > > > + .desc = "File already exists'", > > > + }, > > > > Can you use the description provided by man 3 errno? This is valid for all > > errors you're adding. > > It's a bit lengthy. But sure. You can trim it. The important point is to avoid creating new descriptions. > > > > > > + { > > > + .error_fmt = QERR_OPEN_FILE_EMFILE, > > > + .desc = "Max open files when opening file'", > > > + }, > > > + { > > > + .error_fmt = QERR_ENOSPC, > > > + .desc = "No space left opening file'", > > > + }, > > > + { > > > + .error_fmt = QERR_EPERM, > > > + .desc = "Permission denied (EPERM) opening file'", > > > + }, > > > + { > > > + .error_fmt = QERR_READ_ONLY, > > > + .desc = "Read only filesystem opening file'", > > > + }, > > > + { > > > + .error_fmt = QERR_ENOTDIR, > > > + .desc = "Directory related error opening file'", > > > + }, > > > + { > > > + .error_fmt = QERR_EFBIG, > > > + .desc = "File too big opening'", > > > + }, > > > + { > > > .error_fmt = QERR_PERMISSION_DENIED, > > > .desc = "Insufficient permission to perform this operation", > > > }, > > > diff --git a/qerror.h b/qerror.h > > > index e26c635..ddc04e8 100644 > > > --- a/qerror.h > > > +++ b/qerror.h > > > @@ -181,6 +181,33 @@ QError *qobject_to_qerror(const QObject *obj); > > > #define QERR_OPEN_FILE_FAILED \ > > > "{ 'class': 'OpenFileFailed', 'data': { 'filename': %s } }" > > > > > > +#define QERR_OPEN_FILE_EMFILE \ > > > + "{ 'class': 'OpenFileEMFILE', 'data': {} }" > > > + > > > +#define QERR_EINTR \ > > > + "{ 'class': 'EINTR', 'data': {} }" > > > + > > > +#define QERR_EACCES \ > > > + "{ 'class': 'EACCES', 'data': {} }" > > > + > > > +#define QERR_EEXIST \ > > > + "{ 'class': 'EEXIST', 'data': {} }" > > > > We use more descriptive names instead of using the errno name. Like AlreadyExists. > > Please fix it for errors you adding. > > Actually this was on purpose, to allow someone catching it to know it > originated in a failed systemcall. So your way the catcher would have to > go read the source (or hopefully I'll choose similar names). No, if the command has a good description, like: @AlreadyExists, if the file already exists Then it's possible to know what happened and what the client should do. > > > > > > + > > > +#define QERR_ENOSPC \ > > > + "{ 'class': 'ENOSPC', 'data': {} }" > > > + > > > +#define QERR_EPERM \ > > > + "{ 'class': 'EPERM', 'data': {} }" > > > + > > > +#define QERR_READ_ONLY \ > > > + "{ 'class': 'ReadOnly', 'data': {} }" > > > + > > > +#define QERR_ENOTDIR \ > > > + "{ 'class': 'ENOTDIR', 'data': {} }" > > > + > > > +#define QERR_EFBIG \ > > > + "{ 'class': 'EFBIG', 'data': {} }" > > > + > > > #define QERR_PERMISSION_DENIED \ > > > "{ 'class': 'PermissionDenied', 'data': {} }" > > > > > > > >
On Fri, Mar 23, 2012 at 11:21:25AM -0300, Luiz Capitulino wrote: > On Sun, 18 Mar 2012 19:29:09 +0100 > Alon Levy <alevy@redhat.com> wrote: > > > Added: > > > > QERR_EINTR > > QERR_EACCES > > QERR_EEXIST > > QERR_OPEN_FILE_EMFILE > > QERR_ENOSPC > > QERR_EPERM > > QERR_READ_ONLY > > QERR_ENOTDIR > > QERR_EFBIG > > > > Signed-off-by: Alon Levy <alevy@redhat.com> > > --- > > qerror.c | 36 ++++++++++++++++++++++++++++++++++++ > > qerror.h | 27 +++++++++++++++++++++++++++ > > 2 files changed, 63 insertions(+) > > > > diff --git a/qerror.c b/qerror.c > > index f55d435..4915939 100644 > > --- a/qerror.c > > +++ b/qerror.c > > @@ -213,6 +213,42 @@ static const QErrorStringTable qerror_table[] = { > > .desc = "Could not open '%(filename)'", > > }, > > { > > + .error_fmt = QERR_EINTR, > > + .desc = "Interrupted open of '%(filename)'", > > + }, > > There are two problems here. First, the QERR_INTR macro doesn't have the > filename argument, so this will crash. > > The second problem is that, I've talked to Anthony and EINTR should not > be returned to clients, it should be handled intead. So, please handle it > during write(). That would require either blocking or using async monitor... and in general I guess it makes the signature of qemu_fopen_err be: void qemu_fopen_err(const char *path, const char *mode, int block, Error **errp) Sounds ok? > > > + { > > + .error_fmt = QERR_EACCES, > > + .desc = "Cannot access file'", > > + }, > > We already have QERR_PERMISSION_DENIED. > > > + { > > + .error_fmt = QERR_EEXIST, > > + .desc = "File already exists'", > > + }, > > Can you use the description provided by man 3 errno? This is valid for all > errors you're adding. > > > + { > > + .error_fmt = QERR_OPEN_FILE_EMFILE, > > + .desc = "Max open files when opening file'", > > + }, > > + { > > + .error_fmt = QERR_ENOSPC, > > + .desc = "No space left opening file'", > > + }, > > + { > > + .error_fmt = QERR_EPERM, > > + .desc = "Permission denied (EPERM) opening file'", > > + }, > > + { > > + .error_fmt = QERR_READ_ONLY, > > + .desc = "Read only filesystem opening file'", > > + }, > > + { > > + .error_fmt = QERR_ENOTDIR, > > + .desc = "Directory related error opening file'", > > + }, > > + { > > + .error_fmt = QERR_EFBIG, > > + .desc = "File too big opening'", > > + }, > > + { > > .error_fmt = QERR_PERMISSION_DENIED, > > .desc = "Insufficient permission to perform this operation", > > }, > > diff --git a/qerror.h b/qerror.h > > index e26c635..ddc04e8 100644 > > --- a/qerror.h > > +++ b/qerror.h > > @@ -181,6 +181,33 @@ QError *qobject_to_qerror(const QObject *obj); > > #define QERR_OPEN_FILE_FAILED \ > > "{ 'class': 'OpenFileFailed', 'data': { 'filename': %s } }" > > > > +#define QERR_OPEN_FILE_EMFILE \ > > + "{ 'class': 'OpenFileEMFILE', 'data': {} }" > > + > > +#define QERR_EINTR \ > > + "{ 'class': 'EINTR', 'data': {} }" > > + > > +#define QERR_EACCES \ > > + "{ 'class': 'EACCES', 'data': {} }" > > + > > +#define QERR_EEXIST \ > > + "{ 'class': 'EEXIST', 'data': {} }" > > We use more descriptive names instead of using the errno name. Like AlreadyExists. > Please fix it for errors you adding. > > > + > > +#define QERR_ENOSPC \ > > + "{ 'class': 'ENOSPC', 'data': {} }" > > + > > +#define QERR_EPERM \ > > + "{ 'class': 'EPERM', 'data': {} }" > > + > > +#define QERR_READ_ONLY \ > > + "{ 'class': 'ReadOnly', 'data': {} }" > > + > > +#define QERR_ENOTDIR \ > > + "{ 'class': 'ENOTDIR', 'data': {} }" > > + > > +#define QERR_EFBIG \ > > + "{ 'class': 'EFBIG', 'data': {} }" > > + > > #define QERR_PERMISSION_DENIED \ > > "{ 'class': 'PermissionDenied', 'data': {} }" > > > >
On Fri, Mar 23, 2012 at 11:21:25AM -0300, Luiz Capitulino wrote: > On Sun, 18 Mar 2012 19:29:09 +0100 > Alon Levy <alevy@redhat.com> wrote: > > > Added: > > > > QERR_EINTR > > QERR_EACCES > > QERR_EEXIST > > QERR_OPEN_FILE_EMFILE > > QERR_ENOSPC > > QERR_EPERM > > QERR_READ_ONLY > > QERR_ENOTDIR > > QERR_EFBIG > > > > Signed-off-by: Alon Levy <alevy@redhat.com> > > --- > > qerror.c | 36 ++++++++++++++++++++++++++++++++++++ > > qerror.h | 27 +++++++++++++++++++++++++++ > > 2 files changed, 63 insertions(+) > > > > diff --git a/qerror.c b/qerror.c > > index f55d435..4915939 100644 > > --- a/qerror.c > > +++ b/qerror.c > > @@ -213,6 +213,42 @@ static const QErrorStringTable qerror_table[] = { > > .desc = "Could not open '%(filename)'", > > }, > > { > > + .error_fmt = QERR_EINTR, > > + .desc = "Interrupted open of '%(filename)'", > > + }, > > There are two problems here. First, the QERR_INTR macro doesn't have the > filename argument, so this will crash. > > The second problem is that, I've talked to Anthony and EINTR should not > be returned to clients, it should be handled intead. So, please handle it > during write(). From a brief due dilligence (git grep -A10 fopen | grep EINTR | wc -l == 0) I gather that no one ever checks EINTR after fopen, so I'm going to avoid the complexity of possibly blocking in qemu_fopen_err and just note in the qapi-schema wherever an qemu_fopen_err derived error might be returned that the generic OpenFileFailed could indicate an EINTR. I think it will at least be easier to fix it later in a single location, that is at qemu_fopen_err, in a later patch. > > > + { > > + .error_fmt = QERR_EACCES, > > + .desc = "Cannot access file'", > > + }, > > We already have QERR_PERMISSION_DENIED. > > > + { > > + .error_fmt = QERR_EEXIST, > > + .desc = "File already exists'", > > + }, > > Can you use the description provided by man 3 errno? This is valid for all > errors you're adding. > > > + { > > + .error_fmt = QERR_OPEN_FILE_EMFILE, > > + .desc = "Max open files when opening file'", > > + }, > > + { > > + .error_fmt = QERR_ENOSPC, > > + .desc = "No space left opening file'", > > + }, > > + { > > + .error_fmt = QERR_EPERM, > > + .desc = "Permission denied (EPERM) opening file'", > > + }, > > + { > > + .error_fmt = QERR_READ_ONLY, > > + .desc = "Read only filesystem opening file'", > > + }, > > + { > > + .error_fmt = QERR_ENOTDIR, > > + .desc = "Directory related error opening file'", > > + }, > > + { > > + .error_fmt = QERR_EFBIG, > > + .desc = "File too big opening'", > > + }, > > + { > > .error_fmt = QERR_PERMISSION_DENIED, > > .desc = "Insufficient permission to perform this operation", > > }, > > diff --git a/qerror.h b/qerror.h > > index e26c635..ddc04e8 100644 > > --- a/qerror.h > > +++ b/qerror.h > > @@ -181,6 +181,33 @@ QError *qobject_to_qerror(const QObject *obj); > > #define QERR_OPEN_FILE_FAILED \ > > "{ 'class': 'OpenFileFailed', 'data': { 'filename': %s } }" > > > > +#define QERR_OPEN_FILE_EMFILE \ > > + "{ 'class': 'OpenFileEMFILE', 'data': {} }" > > + > > +#define QERR_EINTR \ > > + "{ 'class': 'EINTR', 'data': {} }" > > + > > +#define QERR_EACCES \ > > + "{ 'class': 'EACCES', 'data': {} }" > > + > > +#define QERR_EEXIST \ > > + "{ 'class': 'EEXIST', 'data': {} }" > > We use more descriptive names instead of using the errno name. Like AlreadyExists. > Please fix it for errors you adding. > > > + > > +#define QERR_ENOSPC \ > > + "{ 'class': 'ENOSPC', 'data': {} }" > > + > > +#define QERR_EPERM \ > > + "{ 'class': 'EPERM', 'data': {} }" > > + > > +#define QERR_READ_ONLY \ > > + "{ 'class': 'ReadOnly', 'data': {} }" > > + > > +#define QERR_ENOTDIR \ > > + "{ 'class': 'ENOTDIR', 'data': {} }" > > + > > +#define QERR_EFBIG \ > > + "{ 'class': 'EFBIG', 'data': {} }" > > + > > #define QERR_PERMISSION_DENIED \ > > "{ 'class': 'PermissionDenied', 'data': {} }" > > > >
diff --git a/qerror.c b/qerror.c index f55d435..4915939 100644 --- a/qerror.c +++ b/qerror.c @@ -213,6 +213,42 @@ static const QErrorStringTable qerror_table[] = { .desc = "Could not open '%(filename)'", }, { + .error_fmt = QERR_EINTR, + .desc = "Interrupted open of '%(filename)'", + }, + { + .error_fmt = QERR_EACCES, + .desc = "Cannot access file'", + }, + { + .error_fmt = QERR_EEXIST, + .desc = "File already exists'", + }, + { + .error_fmt = QERR_OPEN_FILE_EMFILE, + .desc = "Max open files when opening file'", + }, + { + .error_fmt = QERR_ENOSPC, + .desc = "No space left opening file'", + }, + { + .error_fmt = QERR_EPERM, + .desc = "Permission denied (EPERM) opening file'", + }, + { + .error_fmt = QERR_READ_ONLY, + .desc = "Read only filesystem opening file'", + }, + { + .error_fmt = QERR_ENOTDIR, + .desc = "Directory related error opening file'", + }, + { + .error_fmt = QERR_EFBIG, + .desc = "File too big opening'", + }, + { .error_fmt = QERR_PERMISSION_DENIED, .desc = "Insufficient permission to perform this operation", }, diff --git a/qerror.h b/qerror.h index e26c635..ddc04e8 100644 --- a/qerror.h +++ b/qerror.h @@ -181,6 +181,33 @@ QError *qobject_to_qerror(const QObject *obj); #define QERR_OPEN_FILE_FAILED \ "{ 'class': 'OpenFileFailed', 'data': { 'filename': %s } }" +#define QERR_OPEN_FILE_EMFILE \ + "{ 'class': 'OpenFileEMFILE', 'data': {} }" + +#define QERR_EINTR \ + "{ 'class': 'EINTR', 'data': {} }" + +#define QERR_EACCES \ + "{ 'class': 'EACCES', 'data': {} }" + +#define QERR_EEXIST \ + "{ 'class': 'EEXIST', 'data': {} }" + +#define QERR_ENOSPC \ + "{ 'class': 'ENOSPC', 'data': {} }" + +#define QERR_EPERM \ + "{ 'class': 'EPERM', 'data': {} }" + +#define QERR_READ_ONLY \ + "{ 'class': 'ReadOnly', 'data': {} }" + +#define QERR_ENOTDIR \ + "{ 'class': 'ENOTDIR', 'data': {} }" + +#define QERR_EFBIG \ + "{ 'class': 'EFBIG', 'data': {} }" + #define QERR_PERMISSION_DENIED \ "{ 'class': 'PermissionDenied', 'data': {} }"
Added: QERR_EINTR QERR_EACCES QERR_EEXIST QERR_OPEN_FILE_EMFILE QERR_ENOSPC QERR_EPERM QERR_READ_ONLY QERR_ENOTDIR QERR_EFBIG Signed-off-by: Alon Levy <alevy@redhat.com> --- qerror.c | 36 ++++++++++++++++++++++++++++++++++++ qerror.h | 27 +++++++++++++++++++++++++++ 2 files changed, 63 insertions(+)