Message ID | 20120313085640.10958.30310.stgit@amd-6168-8-1.englab.nay.redhat.com |
---|---|
State | New |
Headers | show |
On Tue, Mar 13, 2012 at 04:56:40PM +0800, Jason Wang wrote: > It's hard to track all mac addresses and their usage (vlan, bondings, > ipv6) in qemu to send proper gratuitous packet. The better choice is > to let guest to send them. > > So, this patch introduces a new rw config status bit of virtio-net, > VIRTIO_NET_S_ANNOUNCE which is used to notify guest to announce > presence of its link through config update interrupt. When gust have > done the announcement, it should clear that bit. The feature is negotiated by > a new feature bit VIRTIO_NET_F_ANNOUNCE. > > Signed-off-by: Jason Wang <jasowang@redhat.com> > --- > hw/virtio-net.c | 19 ++++++++++++++++++- > hw/virtio-net.h | 3 +++ > 2 files changed, 21 insertions(+), 1 deletions(-) > > diff --git a/hw/virtio-net.c b/hw/virtio-net.c > index bc5e3a8..a591a48 100644 > --- a/hw/virtio-net.c > +++ b/hw/virtio-net.c > @@ -95,6 +95,8 @@ static void virtio_net_set_config(VirtIODevice *vdev, const uint8_t *config) > memcpy(n->mac, netcfg.mac, ETH_ALEN); > qemu_format_nic_info_str(&n->nic->nc, n->mac); > } > + > + memcpy(&n->status, &netcfg.status, sizeof(n->status)); This overwrites all of status, which seems wrong as it will also overwrite the link state - that should have been read-only. > } > > static bool virtio_net_started(VirtIONet *n, uint8_t status) > @@ -227,7 +229,7 @@ static uint32_t virtio_net_get_features(VirtIODevice *vdev, uint32_t features) > { > VirtIONet *n = to_virtio_net(vdev); > > - features |= (1 << VIRTIO_NET_F_MAC); > + features |= (1 << VIRTIO_NET_F_MAC | 1 << VIRTIO_NET_F_GUEST_ANNOUNCE); > Why do you force this bit on? We have a property below ... > if (peer_has_vnet_hdr(n)) { > tap_using_vnet_hdr(n->nic->nc.peer, 1); > @@ -983,6 +985,20 @@ static void virtio_net_cleanup(VLANClientState *nc) > n->nic = NULL; > } > > +static int virtio_net_announce(VLANClientState *nc) > +{ > + VirtIONet *n = DO_UPCAST(NICState, nc, nc)->opaque; > + > + if (n->vdev.guest_features & (0x1 << VIRTIO_NET_F_GUEST_ANNOUNCE) > + && n->status & VIRTIO_NET_S_LINK_UP) { > + n->status |= VIRTIO_NET_S_ANNOUNCE; > + virtio_notify_config(&n->vdev); > + return 0; > + } > + > + return 1; > +} > + > static NetClientInfo net_virtio_info = { > .type = NET_CLIENT_TYPE_NIC, > .size = sizeof(NICState), > @@ -990,6 +1006,7 @@ static NetClientInfo net_virtio_info = { > .receive = virtio_net_receive, > .cleanup = virtio_net_cleanup, > .link_status_changed = virtio_net_set_link_status, > + .announce = virtio_net_announce, > }; > > VirtIODevice *virtio_net_init(DeviceState *dev, NICConf *conf, > diff --git a/hw/virtio-net.h b/hw/virtio-net.h > index 4468741..9f8cea7 100644 > --- a/hw/virtio-net.h > +++ b/hw/virtio-net.h > @@ -44,8 +44,10 @@ > #define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */ > #define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */ > #define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */ > +#define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce itself */ > > #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ > +#define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */ > > #define TX_TIMER_INTERVAL 150000 /* 150 us */ > > @@ -176,6 +178,7 @@ struct virtio_net_ctrl_mac { > DEFINE_PROP_BIT("guest_tso6", _state, _field, VIRTIO_NET_F_GUEST_TSO6, true), \ > DEFINE_PROP_BIT("guest_ecn", _state, _field, VIRTIO_NET_F_GUEST_ECN, true), \ > DEFINE_PROP_BIT("guest_ufo", _state, _field, VIRTIO_NET_F_GUEST_UFO, true), \ > + DEFINE_PROP_BIT("guest_announce", _state, _field, VIRTIO_NET_F_GUEST_ANNOUNCE, true), \ > DEFINE_PROP_BIT("host_tso4", _state, _field, VIRTIO_NET_F_HOST_TSO4, true), \ > DEFINE_PROP_BIT("host_tso6", _state, _field, VIRTIO_NET_F_HOST_TSO6, true), \ > DEFINE_PROP_BIT("host_ecn", _state, _field, VIRTIO_NET_F_HOST_ECN, true), \
On Tue, Mar 13, 2012 at 04:56:40PM +0800, Jason Wang wrote: > It's hard to track all mac addresses and their usage (vlan, bondings, > ipv6) in qemu to send proper gratuitous packet. The better choice is > to let guest to send them. > > So, this patch introduces a new rw config status bit of virtio-net, > VIRTIO_NET_S_ANNOUNCE which is used to notify guest to announce > presence of its link through config update interrupt. When gust have > done the announcement, it should clear that bit. The feature is negotiated by > a new feature bit VIRTIO_NET_F_ANNOUNCE. > > Signed-off-by: Jason Wang <jasowang@redhat.com> > --- > hw/virtio-net.c | 19 ++++++++++++++++++- > hw/virtio-net.h | 3 +++ > 2 files changed, 21 insertions(+), 1 deletions(-) > > diff --git a/hw/virtio-net.c b/hw/virtio-net.c > index bc5e3a8..a591a48 100644 > --- a/hw/virtio-net.c > +++ b/hw/virtio-net.c > @@ -95,6 +95,8 @@ static void virtio_net_set_config(VirtIODevice *vdev, const uint8_t *config) > memcpy(n->mac, netcfg.mac, ETH_ALEN); > qemu_format_nic_info_str(&n->nic->nc, n->mac); > } > + > + memcpy(&n->status, &netcfg.status, sizeof(n->status)); > } > > static bool virtio_net_started(VirtIONet *n, uint8_t status) > @@ -227,7 +229,7 @@ static uint32_t virtio_net_get_features(VirtIODevice *vdev, uint32_t features) > { > VirtIONet *n = to_virtio_net(vdev); > > - features |= (1 << VIRTIO_NET_F_MAC); > + features |= (1 << VIRTIO_NET_F_MAC | 1 << VIRTIO_NET_F_GUEST_ANNOUNCE); > > if (peer_has_vnet_hdr(n)) { > tap_using_vnet_hdr(n->nic->nc.peer, 1); > @@ -983,6 +985,20 @@ static void virtio_net_cleanup(VLANClientState *nc) > n->nic = NULL; > } > > +static int virtio_net_announce(VLANClientState *nc) > +{ > + VirtIONet *n = DO_UPCAST(NICState, nc, nc)->opaque; > + > + if (n->vdev.guest_features & (0x1 << VIRTIO_NET_F_GUEST_ANNOUNCE) > + && n->status & VIRTIO_NET_S_LINK_UP) { > + n->status |= VIRTIO_NET_S_ANNOUNCE; > + virtio_notify_config(&n->vdev); > + return 0; > + } > + > + return 1; > +} > + Returning 1 on error is confusing. return -1 would be better. > static NetClientInfo net_virtio_info = { > .type = NET_CLIENT_TYPE_NIC, > .size = sizeof(NICState), > @@ -990,6 +1006,7 @@ static NetClientInfo net_virtio_info = { > .receive = virtio_net_receive, > .cleanup = virtio_net_cleanup, > .link_status_changed = virtio_net_set_link_status, > + .announce = virtio_net_announce, > }; > > VirtIODevice *virtio_net_init(DeviceState *dev, NICConf *conf, > diff --git a/hw/virtio-net.h b/hw/virtio-net.h > index 4468741..9f8cea7 100644 > --- a/hw/virtio-net.h > +++ b/hw/virtio-net.h > @@ -44,8 +44,10 @@ > #define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */ > #define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */ > #define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */ > +#define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce itself */ > > #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ > +#define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */ > > #define TX_TIMER_INTERVAL 150000 /* 150 us */ > > @@ -176,6 +178,7 @@ struct virtio_net_ctrl_mac { > DEFINE_PROP_BIT("guest_tso6", _state, _field, VIRTIO_NET_F_GUEST_TSO6, true), \ > DEFINE_PROP_BIT("guest_ecn", _state, _field, VIRTIO_NET_F_GUEST_ECN, true), \ > DEFINE_PROP_BIT("guest_ufo", _state, _field, VIRTIO_NET_F_GUEST_UFO, true), \ > + DEFINE_PROP_BIT("guest_announce", _state, _field, VIRTIO_NET_F_GUEST_ANNOUNCE, true), \ > DEFINE_PROP_BIT("host_tso4", _state, _field, VIRTIO_NET_F_HOST_TSO4, true), \ > DEFINE_PROP_BIT("host_tso6", _state, _field, VIRTIO_NET_F_HOST_TSO6, true), \ > DEFINE_PROP_BIT("host_ecn", _state, _field, VIRTIO_NET_F_HOST_ECN, true), \
diff --git a/hw/virtio-net.c b/hw/virtio-net.c index bc5e3a8..a591a48 100644 --- a/hw/virtio-net.c +++ b/hw/virtio-net.c @@ -95,6 +95,8 @@ static void virtio_net_set_config(VirtIODevice *vdev, const uint8_t *config) memcpy(n->mac, netcfg.mac, ETH_ALEN); qemu_format_nic_info_str(&n->nic->nc, n->mac); } + + memcpy(&n->status, &netcfg.status, sizeof(n->status)); } static bool virtio_net_started(VirtIONet *n, uint8_t status) @@ -227,7 +229,7 @@ static uint32_t virtio_net_get_features(VirtIODevice *vdev, uint32_t features) { VirtIONet *n = to_virtio_net(vdev); - features |= (1 << VIRTIO_NET_F_MAC); + features |= (1 << VIRTIO_NET_F_MAC | 1 << VIRTIO_NET_F_GUEST_ANNOUNCE); if (peer_has_vnet_hdr(n)) { tap_using_vnet_hdr(n->nic->nc.peer, 1); @@ -983,6 +985,20 @@ static void virtio_net_cleanup(VLANClientState *nc) n->nic = NULL; } +static int virtio_net_announce(VLANClientState *nc) +{ + VirtIONet *n = DO_UPCAST(NICState, nc, nc)->opaque; + + if (n->vdev.guest_features & (0x1 << VIRTIO_NET_F_GUEST_ANNOUNCE) + && n->status & VIRTIO_NET_S_LINK_UP) { + n->status |= VIRTIO_NET_S_ANNOUNCE; + virtio_notify_config(&n->vdev); + return 0; + } + + return 1; +} + static NetClientInfo net_virtio_info = { .type = NET_CLIENT_TYPE_NIC, .size = sizeof(NICState), @@ -990,6 +1006,7 @@ static NetClientInfo net_virtio_info = { .receive = virtio_net_receive, .cleanup = virtio_net_cleanup, .link_status_changed = virtio_net_set_link_status, + .announce = virtio_net_announce, }; VirtIODevice *virtio_net_init(DeviceState *dev, NICConf *conf, diff --git a/hw/virtio-net.h b/hw/virtio-net.h index 4468741..9f8cea7 100644 --- a/hw/virtio-net.h +++ b/hw/virtio-net.h @@ -44,8 +44,10 @@ #define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */ #define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */ #define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */ +#define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce itself */ #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ +#define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */ #define TX_TIMER_INTERVAL 150000 /* 150 us */ @@ -176,6 +178,7 @@ struct virtio_net_ctrl_mac { DEFINE_PROP_BIT("guest_tso6", _state, _field, VIRTIO_NET_F_GUEST_TSO6, true), \ DEFINE_PROP_BIT("guest_ecn", _state, _field, VIRTIO_NET_F_GUEST_ECN, true), \ DEFINE_PROP_BIT("guest_ufo", _state, _field, VIRTIO_NET_F_GUEST_UFO, true), \ + DEFINE_PROP_BIT("guest_announce", _state, _field, VIRTIO_NET_F_GUEST_ANNOUNCE, true), \ DEFINE_PROP_BIT("host_tso4", _state, _field, VIRTIO_NET_F_HOST_TSO4, true), \ DEFINE_PROP_BIT("host_tso6", _state, _field, VIRTIO_NET_F_HOST_TSO6, true), \ DEFINE_PROP_BIT("host_ecn", _state, _field, VIRTIO_NET_F_HOST_ECN, true), \
It's hard to track all mac addresses and their usage (vlan, bondings, ipv6) in qemu to send proper gratuitous packet. The better choice is to let guest to send them. So, this patch introduces a new rw config status bit of virtio-net, VIRTIO_NET_S_ANNOUNCE which is used to notify guest to announce presence of its link through config update interrupt. When gust have done the announcement, it should clear that bit. The feature is negotiated by a new feature bit VIRTIO_NET_F_ANNOUNCE. Signed-off-by: Jason Wang <jasowang@redhat.com> --- hw/virtio-net.c | 19 ++++++++++++++++++- hw/virtio-net.h | 3 +++ 2 files changed, 21 insertions(+), 1 deletions(-)