diff mbox series

[v2,2/3] pinctrl: renesas: rzg2l: Add support for enabling/disabling open-drain outputs

Message ID 20241004123658.764557-3-prabhakar.mahadev-lad.rj@bp.renesas.com
State New
Headers show
Series pinctrl: renesas: rzg2l: Add support to configure open-drain and schmitt-trigger properties | expand

Commit Message

Prabhakar Oct. 4, 2024, 12:36 p.m. UTC 
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Add support for enabling and disabling open-drain outputs.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2
- Implemented PIN_CONFIG_DRIVE_OPEN_DRAIN to disable open drain
---
 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

Comments

Geert Uytterhoeven Oct. 4, 2024, 1:05 p.m. UTC | #1 
On Fri, Oct 4, 2024 at 2:37 PM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> Add support for enabling and disabling open-drain outputs.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v1->v2
> - Implemented PIN_CONFIG_DRIVE_OPEN_DRAIN to disable open drain

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-pinctrl for v6.13.

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index b2d309f742af..8d576cc74003 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -139,6 +139,7 @@ 
 #define IEN(off)		(0x1800 + (off) * 8)
 #define PUPD(off)		(0x1C00 + (off) * 8)
 #define ISEL(off)		(0x2C00 + (off) * 8)
+#define NOD(off)		(0x3000 + (off) * 8)
 #define SD_CH(off, ch)		((off) + (ch) * 4)
 #define ETH_POC(off, ch)	((off) + (ch) * 4)
 #define QSPI			(0x3008)
@@ -160,6 +161,7 @@ 
 #define IOLH_MASK		0x03
 #define SR_MASK			0x01
 #define PUPD_MASK		0x03
+#define NOD_MASK		0x01
 
 #define PM_INPUT		0x1
 #define PM_OUTPUT		0x2
@@ -1337,6 +1339,18 @@  static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
 		break;
 	}
 
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		if (!(cfg & PIN_CFG_NOD))
+			return -EINVAL;
+
+		arg = rzg2l_read_pin_config(pctrl, NOD(off), bit, NOD_MASK);
+		if (!arg && param != PIN_CONFIG_DRIVE_PUSH_PULL)
+			return -EINVAL;
+		if (arg && param != PIN_CONFIG_DRIVE_OPEN_DRAIN)
+			return -EINVAL;
+		break;
+
 	case RENESAS_RZV2H_PIN_CONFIG_OUTPUT_IMPEDANCE:
 		if (!(cfg & PIN_CFG_IOLH_RZV2H))
 			return -EINVAL;
@@ -1466,6 +1480,15 @@  static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
 			rzg2l_rmw_pin_config(pctrl, IOLH(off), bit, IOLH_MASK, index);
 			break;
 
+		case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		case PIN_CONFIG_DRIVE_PUSH_PULL:
+			if (!(cfg & PIN_CFG_NOD))
+				return -EINVAL;
+
+			rzg2l_rmw_pin_config(pctrl, NOD(off), bit, NOD_MASK,
+					     param == PIN_CONFIG_DRIVE_OPEN_DRAIN ? 1 : 0);
+			break;
+
 		case RENESAS_RZV2H_PIN_CONFIG_OUTPUT_IMPEDANCE:
 			if (!(cfg & PIN_CFG_IOLH_RZV2H))
 				return -EINVAL;