diff mbox series

[v4,1/2] dt-bindings: i2c: snps,designware-i2c: declare bus capacitance and clk freq optimized

Message ID 20241003111525.779410-2-michael.wu@kneron.us
State New
Headers show
Series Compute HS HCNT and LCNT based on HW parameters | expand

Commit Message

Michael Wu Oct. 3, 2024, 11:15 a.m. UTC
Since there are no registers controlling the hardware parameters
IC_CAP_LOADING and IC_CLK_FREQ_OPTIMIZATION, their values can only be
declared in the device tree.

snps,bus-capacitance-pf indicates the bus capacitance in picofarads (pF).
It affects the high and low pulse width of SCL line in high speed mode.
The legal values for this property are 100 and 400 only, and default
value is 100. This property corresponds to IC_CAP_LOADING.

snps,clk-freq-optimized indicates whether the hardware reduce its
internal clock frequency by reducing the internal latency required to
generate the high period and low period of SCL line. This property
corresponds to IC_CLK_FREQ_OPTIMIZATION.

The driver can calculate the high period count and low period count of
SCL line for high speed mode based on these two properties.

Signed-off-by: Michael Wu <michael.wu@kneron.us>
---
 .../bindings/i2c/snps,designware-i2c.yaml      | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

Comments

Krzysztof Kozlowski Oct. 3, 2024, 1:21 p.m. UTC | #1
On 03/10/2024 13:15, Michael Wu wrote:
> Since there are no registers controlling the hardware parameters
> IC_CAP_LOADING and IC_CLK_FREQ_OPTIMIZATION, their values can only be
> declared in the device tree.
> 
> snps,bus-capacitance-pf indicates the bus capacitance in picofarads (pF).
> It affects the high and low pulse width of SCL line in high speed mode.
> The legal values for this property are 100 and 400 only, and default
> value is 100. This property corresponds to IC_CAP_LOADING.
> 
> snps,clk-freq-optimized indicates whether the hardware reduce its
> internal clock frequency by reducing the internal latency required to
> generate the high period and low period of SCL line. This property
> corresponds to IC_CLK_FREQ_OPTIMIZATION.
> 
> The driver can calculate the high period count and low period count of
> SCL line for high speed mode based on these two properties.
> 
> Signed-off-by: Michael Wu <michael.wu@kneron.us>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


---

<form letter>
This is an automated instruction, just in case, because many review tags
are being ignored. If you know the process, you can skip it (please do
not feel offended by me posting it here - no bad intentions intended).
If you do not know the process, here is a short explanation:

Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions, under or above your Signed-off-by tag. Tag is "received", when
provided in a message replied to you on the mailing list. Tools like b4
can help here. However, there's no need to repost patches *only* to add
the tags. The upstream maintainer will do that for tags received on the
version they apply.

https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577
</form letter>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
index 60035a787e5c..e5d05263c45a 100644
--- a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
@@ -97,6 +97,22 @@  properties:
       - const: tx
       - const: rx
 
+  snps,bus-capacitance-pf:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      This property indicates the bus capacitance in picofarads (pF).
+      This value is used to compute the tHIGH and tLOW periods for high speed
+      mode.
+    enum: [100, 400]
+    default: 100
+
+  snps,clk-freq-optimized:
+    description:
+      This property indicates whether the hardware reduce its clock frequency
+      by reducing the internal latency required to generate the high period and
+      low period of SCL line.
+    type: boolean
+
 unevaluatedProperties: false
 
 required:
@@ -121,6 +137,8 @@  examples:
       i2c-sda-hold-time-ns = <300>;
       i2c-sda-falling-time-ns = <300>;
       i2c-scl-falling-time-ns = <300>;
+      snps,bus-capacitance-pf = <400>;
+      snps,clk-freq-optimized;
     };
   - |
     i2c@2000 {