@@ -97,6 +97,11 @@ typedef struct RTCState {
/* periodic timer */
QEMUTimer *periodic_timer;
int64_t next_periodic_time;
+ /* update-ended timer */
+ QEMUTimer *update_timer;
+ QEMUTimer *update_timer2;
+ uint64_t next_update_time;
+ uint32_t use_timer;
uint16_t irq_reinject_on_ack_count;
uint32_t irq_coalesced;
uint32_t period;
@@ -157,7 +162,8 @@ static void rtc_coalesced_timer(void *opaque)
}
#endif
-static void rtc_timer_update(RTCState *s, int64_t current_time)
+/* handle periodic timer */
+static void periodic_timer_update(RTCState *s, int64_t current_time)
{
int period_code, period;
int64_t cur_clock, next_irq_clock;
@@ -195,7 +201,7 @@ static void rtc_periodic_timer(void *opaque)
{
RTCState *s = opaque;
- rtc_timer_update(s, s->next_periodic_time);
+ periodic_timer_update(s, s->next_periodic_time);
s->cmos_data[RTC_REG_C] |= REG_C_PF;
if (s->cmos_data[RTC_REG_B] & REG_B_PIE) {
s->cmos_data[RTC_REG_C] |= REG_C_IRQF;
@@ -222,6 +228,58 @@ static void rtc_periodic_timer(void *opaque)
}
}
+/* handle update-ended timer */
+static void check_update_timer(RTCState *s)
+{
+ uint64_t next_update_time, expire_time;
+ uint64_t guest_usec;
+ qemu_del_timer(s->update_timer);
+ qemu_del_timer(s->update_timer2);
+
+ if (!((s->cmos_data[RTC_REG_C] & (REG_C_UF | REG_C_AF)) ==
+ (REG_C_UF | REG_C_AF)) && !(s->cmos_data[RTC_REG_B] & REG_B_SET)) {
+ s->use_timer = 1;
+ guest_usec = get_guest_rtc_us(s) % USEC_PER_SEC;
+ if (guest_usec >= (USEC_PER_SEC - 244)) {
+ /* RTC is in update cycle when enabling UIE */
+ s->cmos_data[RTC_REG_A] |= REG_A_UIP;
+ next_update_time = (USEC_PER_SEC - guest_usec) * NS_PER_USEC;
+ expire_time = qemu_get_clock_ns(rtc_clock) + next_update_time;
+ qemu_mod_timer(s->update_timer2, expire_time);
+ } else {
+ next_update_time = (USEC_PER_SEC - guest_usec - 244) * NS_PER_USEC;
+ expire_time = qemu_get_clock_ns(rtc_clock) + next_update_time;
+ s->next_update_time = expire_time;
+ qemu_mod_timer(s->update_timer, expire_time);
+ }
+ } else {
+ s->use_timer = 0;
+ }
+}
+
+static void rtc_update_timer(void *opaque)
+{
+ RTCState *s = opaque;
+
+ if (!(s->cmos_data[RTC_REG_B] & REG_B_SET)) {
+ s->cmos_data[RTC_REG_A] |= REG_A_UIP;
+ qemu_mod_timer(s->update_timer2, s->next_update_time + 244000UL);
+ }
+}
+
+static void rtc_update_timer2(void *opaque)
+{
+ RTCState *s = opaque;
+
+ if (!(s->cmos_data[RTC_REG_B] & REG_B_SET)) {
+ s->cmos_data[RTC_REG_C] |= REG_C_UF;
+ s->cmos_data[RTC_REG_A] &= ~REG_A_UIP;
+ s->cmos_data[RTC_REG_C] |= REG_C_IRQF;
+ qemu_irq_raise(s->irq);
+ }
+ check_update_timer(s);
+}
+
static void rtc_set_offset(RTCState *s, int32_t start_usec)
{
struct tm *tm = &s->current_tm;
@@ -283,13 +341,14 @@ static void cmos_ioport_write(void *opaque, uint32_t addr, uint32_t data)
rtc_calibrate_time(s);
rtc_set_offset(s, 500000);
s->cmos_data[RTC_REG_A] &= ~REG_A_UIP;
+ check_update_timer(s);
divider_reset = 0;
}
}
/* UIP bit is read only */
s->cmos_data[RTC_REG_A] = (data & ~REG_A_UIP) |
(s->cmos_data[RTC_REG_A] & REG_A_UIP);
- rtc_timer_update(s, qemu_get_clock_ns(rtc_clock));
+ periodic_timer_update(s, qemu_get_clock_ns(rtc_clock));
break;
case RTC_REG_B:
if (data & REG_B_SET) {
@@ -315,7 +374,8 @@ static void cmos_ioport_write(void *opaque, uint32_t addr, uint32_t data)
}
}
s->cmos_data[RTC_REG_B] = data;
- rtc_timer_update(s, qemu_get_clock_ns(rtc_clock));
+ periodic_timer_update(s, qemu_get_clock_ns(rtc_clock));
+ check_update_timer(s);
break;
case RTC_REG_C:
case RTC_REG_D:
@@ -445,7 +505,7 @@ static uint32_t cmos_ioport_read(void *opaque, uint32_t addr)
break;
case RTC_REG_A:
ret = s->cmos_data[s->cmos_index];
- if (update_in_progress(s)) {
+ if ((s->use_timer == 0) && update_in_progress(s)) {
ret |= REG_A_UIP;
}
break;
@@ -453,6 +513,12 @@ static uint32_t cmos_ioport_read(void *opaque, uint32_t addr)
ret = s->cmos_data[s->cmos_index];
qemu_irq_lower(s->irq);
s->cmos_data[RTC_REG_C] = 0x00;
+ if (!(s->cmos_data[RTC_REG_B] & REG_B_SET)) {
+ rtc_calibrate_time(s);
+ }
+ if (ret & (REG_C_UF | REG_C_AF)) {
+ check_update_timer(s);
+ }
#ifdef TARGET_I386
if(s->irq_coalesced &&
(s->cmos_data[RTC_REG_B] & REG_B_PIE) &&
@@ -545,6 +611,9 @@ static const VMStateDescription vmstate_rtc = {
VMSTATE_INT32(offset_usec, RTCState),
VMSTATE_TIMER(periodic_timer, RTCState),
VMSTATE_INT64(next_periodic_time, RTCState),
+ VMSTATE_TIMER(update_timer, RTCState),
+ VMSTATE_TIMER(update_timer2, RTCState),
+ VMSTATE_UINT64(next_update_time, RTCState),
VMSTATE_UINT32_V(irq_coalesced, RTCState, 2),
VMSTATE_UINT32_V(period, RTCState, 2),
VMSTATE_END_OF_LIST()
@@ -557,7 +626,8 @@ static void rtc_notify_clock_reset(Notifier *notifier, void *data)
int64_t now = *(int64_t *)data;
rtc_set_date_from_host(&s->dev);
- rtc_timer_update(s, now);
+ periodic_timer_update(s, now);
+ check_update_timer(s);
#ifdef TARGET_I386
if (s->lost_tick_policy == LOST_TICK_SLEW) {
rtc_coalesced_timer_update(s);
@@ -579,6 +649,7 @@ static void rtc_reset(void *opaque)
s->cmos_data[RTC_REG_B] &= ~(REG_B_PIE | REG_B_AIE | REG_B_SQWE);
s->cmos_data[RTC_REG_C] &= ~(REG_C_UF | REG_C_IRQF | REG_C_PF | REG_C_AF);
+ check_update_timer(s);
qemu_irq_lower(s->irq);
@@ -649,6 +720,9 @@ static int rtc_initfn(ISADevice *dev)
#endif
s->periodic_timer = qemu_new_timer_ns(rtc_clock, rtc_periodic_timer, s);
+ s->update_timer = qemu_new_timer_ns(rtc_clock, rtc_update_timer, s);
+ s->update_timer2 = qemu_new_timer_ns(rtc_clock, rtc_update_timer2, s);
+ check_update_timer(s);
s->clock_reset_notifier.notify = rtc_notify_clock_reset;
qemu_register_clock_reset_notifier(rtc_clock, &s->clock_reset_notifier);
Use a timer to emulate update cycle. When update cycle ended and UIE is setting, then raise an interrupt. The timer runs only when UF or AF is cleared. Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> --- hw/mc146818rtc.c | 86 ++++++++++++++++++++++++++++++++++++++++++++++++++---- 1 files changed, 80 insertions(+), 6 deletions(-) -- 1.7.1