Message ID | 20240321100422.5347-5-saif.abrar@linux.vnet.ibm.com |
---|---|
State | New |
Headers | show |
Series | pnv/phb4: Update PHB4 to the latest spec PH5 | expand |
On 3/21/24 11:04, Saif Abrar wrote: > SW cannot write the read-only(RO) bits of a register > and write-only(WO) bits of a register return 0 when read. > > Added ro_mask[] for each register that defines which > bits in that register are RO. > When writing to a register, the RO-bits are not updated. > > When reading a register, clear the WO bits and return the updated value. > > Tested the registers PHB_DMA_SYNC, PHB_PCIE_HOTPLUG_STATUS, PHB_PCIE_LMR, > PHB_PCIE_DLP_TRWCTL, PHB_LEM_ERROR_AND_MASK and PHB_LEM_ERROR_OR_MASK > by writing all 1's and reading back the value. > The WO bits in these registers should read back as 0. > > Signed-off-by: Saif Abrar <saif.abrar@linux.vnet.ibm.com> > --- > hw/pci-host/pnv_phb4.c | 77 ++++++++++++++++++++++++++--- > include/hw/pci-host/pnv_phb4.h | 7 +++ > include/hw/pci-host/pnv_phb4_regs.h | 19 +++++-- > tests/qtest/pnv-phb4-test.c | 60 +++++++++++++++++++++- > 4 files changed, 150 insertions(+), 13 deletions(-) > > diff --git a/hw/pci-host/pnv_phb4.c b/hw/pci-host/pnv_phb4.c > index b3a83837f8..a81763f34c 100644 > --- a/hw/pci-host/pnv_phb4.c > +++ b/hw/pci-host/pnv_phb4.c > @@ -735,6 +735,10 @@ static void pnv_phb4_reg_write(void *opaque, hwaddr off, uint64_t val, > return; > } > > + /* Update 'val' according to the register's RO-mask */ > + val = (phb->regs[off >> 3] & phb->ro_mask[off >> 3]) | > + (val & ~(phb->ro_mask[off >> 3])); > + > /* Record whether it changed */ > changed = phb->regs[off >> 3] != val; > > @@ -808,7 +812,7 @@ static void pnv_phb4_reg_write(void *opaque, hwaddr off, uint64_t val, > case PHB_TCE_TAG_ENABLE: > case PHB_INT_NOTIFY_ADDR: > case PHB_INT_NOTIFY_INDEX: > - case PHB_DMARD_SYNC: > + case PHB_DMA_SYNC: > break; > > /* Noise on anything else */ > @@ -846,7 +850,7 @@ static uint64_t pnv_phb4_reg_read(void *opaque, hwaddr off, unsigned size) > case PHB_VERSION: > return PNV_PHB4_PEC_GET_CLASS(phb->pec)->version; > > - /* Read-only */ > + /* Read-only */ > case PHB_PHB4_GEN_CAP: > return 0xe4b8000000000000ull; > case PHB_PHB4_TCE_CAP: > @@ -856,18 +860,49 @@ static uint64_t pnv_phb4_reg_read(void *opaque, hwaddr off, unsigned size) > case PHB_PHB4_EEH_CAP: > return phb->big_phb ? 0x2000000000000000ull : 0x1000000000000000ull; > > + /* Write-only, read will return zeros */ > + case PHB_LEM_ERROR_AND_MASK: > + case PHB_LEM_ERROR_OR_MASK: > + return 0; > + case PHB_PCIE_DLP_TRWCTL: > + val &= ~PHB_PCIE_DLP_TRWCTL_WREN; > + return val; > /* IODA table accesses */ > case PHB_IODA_DATA0: > return pnv_phb4_ioda_read(phb); > > + /* > + * DMA sync: make it look like it's complete, > + * clear write-only read/write start sync bits. > + */ > + case PHB_DMA_SYNC: > + val = PHB_DMA_SYNC_RD_COMPLETE | > + ~(PHB_DMA_SYNC_RD_START | PHB_DMA_SYNC_WR_START); > + return val; > + > + /* > + * PCI-E Stack registers > + */ > + case PHB_PCIE_SCR: > + val |= PHB_PCIE_SCR_PLW_X16; /* RO bit */ > + break; > + > /* Link training always appears trained */ > case PHB_PCIE_DLP_TRAIN_CTL: > /* TODO: Do something sensible with speed ? */ > - return PHB_PCIE_DLP_INBAND_PRESENCE | PHB_PCIE_DLP_TL_LINKACT; > + val |= PHB_PCIE_DLP_INBAND_PRESENCE | PHB_PCIE_DLP_TL_LINKACT; > + return val; > + > + case PHB_PCIE_HOTPLUG_STATUS: > + /* Clear write-only bit */ > + val &= ~PHB_PCIE_HPSTAT_RESAMPLE; > + return val; > > - /* DMA read sync: make it look like it's complete */ > - case PHB_DMARD_SYNC: > - return PHB_DMARD_SYNC_COMPLETE; > + /* Link Management Register */ > + case PHB_PCIE_LMR: > + /* These write-only bits always read as 0 */ > + val &= ~(PHB_PCIE_LMR_CHANGELW | PHB_PCIE_LMR_RETRAINLINK); > + return val; > > /* Silent simple reads */ > case PHB_LSI_SOURCE_ID: > @@ -1712,6 +1747,33 @@ static PCIIOMMUOps pnv_phb4_iommu_ops = { > .get_address_space = pnv_phb4_dma_iommu, > }; > > +static void pnv_phb4_ro_mask_init(PnvPHB4 *phb) > +{ > + /* Clear RO-mask to make all regs as R/W by default */ > + memset(phb->ro_mask, 0x0, PNV_PHB4_NUM_REGS * sizeof(uint64_t)); > + > + /* > + * Set register specific RO-masks > + */ > + > + /* PBL - Error Injection Register (0x1910) */ > + phb->ro_mask[PHB_PBL_ERR_INJECT >> 3] = > + PPC_BITMASK(0, 23) | PPC_BITMASK(28, 35) | PPC_BIT(38) | PPC_BIT(46) | > + PPC_BITMASK(49, 51) | PPC_BITMASK(55, 63); > + > + /* Reserved bits[60:63] */ > + phb->ro_mask[PHB_TXE_ERR_LEM_ENABLE >> 3] = > + phb->ro_mask[PHB_TXE_ERR_AIB_FENCE_ENABLE >> 3] = PPC_BITMASK(60, 63); > + /* Reserved bits[36:63] */ > + phb->ro_mask[PHB_RXE_TCE_ERR_LEM_ENABLE >> 3] = > + phb->ro_mask[PHB_RXE_TCE_ERR_AIB_FENCE_ENABLE >> 3] = PPC_BITMASK(36, 63); > + /* Reserved bits[40:63] */ > + phb->ro_mask[PHB_ERR_LEM_ENABLE >> 3] = > + phb->ro_mask[PHB_ERR_AIB_FENCE_ENABLE >> 3] = PPC_BITMASK(40, 63); These constant values should be defined in an array under PnvPhb4Class Thanks, C. > + /* TODO: Add more RO-masks as regs are implemented in the model */ > +} > + > static void pnv_phb4_err_reg_reset(PnvPHB4 *phb) > { > STICKY_RST(PHB_ERR_STATUS, 0, PPC_BITMASK(0, 33)); > @@ -1782,6 +1844,9 @@ static void pnv_phb4_instance_init(Object *obj) > > /* XIVE interrupt source object */ > object_initialize_child(obj, "source", &phb->xsrc, TYPE_XIVE_SOURCE); > + > + /* Initialize RO-mask of registers */ > + pnv_phb4_ro_mask_init(phb); > } > > void pnv_phb4_bus_init(DeviceState *dev, PnvPHB4 *phb) > diff --git a/include/hw/pci-host/pnv_phb4.h b/include/hw/pci-host/pnv_phb4.h > index 3212e68160..91e81eee0e 100644 > --- a/include/hw/pci-host/pnv_phb4.h > +++ b/include/hw/pci-host/pnv_phb4.h > @@ -94,6 +94,13 @@ struct PnvPHB4 { > uint64_t regs[PNV_PHB4_NUM_REGS]; > MemoryRegion mr_regs; > > + /* > + * Read-only bitmask for registers > + * Bit value: 1 => RO bit > + * 0 => RW bit > + */ > + uint64_t ro_mask[PNV_PHB4_NUM_REGS];> + > /* Extra SCOM-only register */ > uint64_t scom_hv_ind_addr_reg; > > diff --git a/include/hw/pci-host/pnv_phb4_regs.h b/include/hw/pci-host/pnv_phb4_regs.h > index df5e86d29a..391d6a89ea 100644 > --- a/include/hw/pci-host/pnv_phb4_regs.h > +++ b/include/hw/pci-host/pnv_phb4_regs.h > @@ -180,9 +180,11 @@ > #define PHB_M64_AOMASK 0x1d0 > #define PHB_M64_UPPER_BITS 0x1f0 > #define PHB_NXLATE_PREFIX 0x1f8 > -#define PHB_DMARD_SYNC 0x200 > -#define PHB_DMARD_SYNC_START PPC_BIT(0) > -#define PHB_DMARD_SYNC_COMPLETE PPC_BIT(1) > +#define PHB_DMA_SYNC 0x200 > +#define PHB_DMA_SYNC_RD_START PPC_BIT(0) > +#define PHB_DMA_SYNC_RD_COMPLETE PPC_BIT(1) > +#define PHB_DMA_SYNC_WR_START PPC_BIT(2) > +#define PHB_DMA_SYNC_WR_COMPLETE PPC_BIT(3) > #define PHB_RTC_INVALIDATE 0x208 > #define PHB_RTC_INVALIDATE_ALL PPC_BIT(0) > #define PHB_RTC_INVALIDATE_RID PPC_BITMASK(16, 31) > @@ -395,8 +397,8 @@ > #define PHB_PCIE_SCR 0x1A00 > #define PHB_PCIE_SCR_SLOT_CAP PPC_BIT(15) > #define PHB_PCIE_SCR_MAXLINKSPEED PPC_BITMASK(32, 35) > +#define PHB_PCIE_SCR_PLW_X16 PPC_BIT(41) /* x16 */ > #define PHB_PCIE_BNR 0x1A08 > - > #define PHB_PCIE_CRESET 0x1A10 > #define PHB_PCIE_CRESET_CFG_CORE PPC_BIT(0) > #define PHB_PCIE_CRESET_TLDLP PPC_BIT(1) > @@ -405,7 +407,14 @@ > #define PHB_PCIE_CRESET_PIPE_N PPC_BIT(4) > #define PHB_PCIE_CRESET_REFCLK_N PPC_BIT(8) > #define PHB_PCIE_HOTPLUG_STATUS 0x1A20 > +#define PHB_PCIE_HPSTAT_SIMDIAG PPC_BIT(3) > +#define PHB_PCIE_HPSTAT_RESAMPLE PPC_BIT(9) > #define PHB_PCIE_HPSTAT_PRESENCE PPC_BIT(10) > +#define PHB_PCIE_HPSTAT_LINKACTIVE PPC_BIT(12) > +#define PHB_PCIE_LMR 0x1A30 > +#define PHB_PCIE_LMR_CHANGELW PPC_BIT(0) > +#define PHB_PCIE_LMR_RETRAINLINK PPC_BIT(1) > +#define PHB_PCIE_LMR_LINKACTIVE PPC_BIT(8) > > #define PHB_PCIE_DLP_TRAIN_CTL 0x1A40 > #define PHB_PCIE_DLP_LINK_WIDTH PPC_BITMASK(30, 35) > @@ -433,7 +442,7 @@ > > #define PHB_PCIE_DLP_TRWCTL 0x1A80 > #define PHB_PCIE_DLP_TRWCTL_EN PPC_BIT(0) > - > +#define PHB_PCIE_DLP_TRWCTL_WREN PPC_BIT(1) > #define PHB_PCIE_DLP_ERRLOG1 0x1AA0 > #define PHB_PCIE_DLP_ERRLOG2 0x1AA8 > #define PHB_PCIE_DLP_ERR_STATUS 0x1AB0 > diff --git a/tests/qtest/pnv-phb4-test.c b/tests/qtest/pnv-phb4-test.c > index 708df3867c..0c8e58dd5f 100644 > --- a/tests/qtest/pnv-phb4-test.c > +++ b/tests/qtest/pnv-phb4-test.c > @@ -75,7 +75,8 @@ static void phb4_sticky_rst_test(QTestState *qts) > * Sticky reset test of PHB_PBL_ERR_STATUS. > * > * Write all 1's to reg PHB_PBL_ERR_INJECT. > - * Updated value will be copied to reg PHB_PBL_ERR_STATUS. > + * RO-only bits will not be written and > + * updated value will be copied to reg PHB_PBL_ERR_STATUS. > * > * Reset PBL core by setting PHB_PCIE_CRESET_PBL in reg PHB_PCIE_CRESET. > * Verify the sticky bits are still set. > @@ -83,7 +84,59 @@ static void phb4_sticky_rst_test(QTestState *qts) > pnv_phb4_xscom_write(qts, PHB_PBL_ERR_INJECT, PPC_BITMASK(0, 63)); > pnv_phb4_xscom_write(qts, PHB_PCIE_CRESET, PHB_PCIE_CRESET_PBL); /*Reset*/ > val = pnv_phb4_xscom_read(qts, PHB_PBL_ERR_STATUS); > - g_assert_cmpuint(val, ==, (PPC_BITMASK(0, 9) | PPC_BITMASK(12, 63))); > + g_assert_cmpuint(val, ==, 0xF00DFD8E00); > +} > + > +/* Check that write-only bits/regs return 0 when read */ > +static void phb4_writeonly_read_test(QTestState *qts) > +{ > + uint64_t val; > + > + /* > + * Set all bits of PHB_DMA_SYNC, > + * bits 0 and 2 are write-only and should be read as 0. > + */ > + pnv_phb4_xscom_write(qts, PHB_DMA_SYNC, PPC_BITMASK(0, 63)); > + val = pnv_phb4_xscom_read(qts, PHB_DMA_SYNC); > + g_assert_cmpuint(val & PPC_BIT(0), ==, 0x0); > + g_assert_cmpuint(val & PPC_BIT(2), ==, 0x0); > + > + /* > + * Set all bits of PHB_PCIE_HOTPLUG_STATUS, > + * bit 9 is write-only and should be read as 0. > + */ > + pnv_phb4_xscom_write(qts, PHB_PCIE_HOTPLUG_STATUS, PPC_BITMASK(0, 63)); > + val = pnv_phb4_xscom_read(qts, PHB_PCIE_HOTPLUG_STATUS); > + g_assert_cmpuint(val & PPC_BIT(9), ==, 0x0); > + > + /* > + * Set all bits of PHB_PCIE_LMR, > + * bits 0 and 1 are write-only and should be read as 0. > + */ > + pnv_phb4_xscom_write(qts, PHB_PCIE_LMR, PPC_BITMASK(0, 63)); > + val = pnv_phb4_xscom_read(qts, PHB_PCIE_LMR); > + g_assert_cmpuint(val & PPC_BIT(0), ==, 0x0); > + g_assert_cmpuint(val & PPC_BIT(1), ==, 0x0); > + > + /* > + * Set all bits of PHB_PCIE_DLP_TRWCTL, > + * write-only bit-1 should be read as 0. > + */ > + pnv_phb4_xscom_write(qts, PHB_PCIE_DLP_TRWCTL, PPC_BITMASK(0, 63)); > + val = pnv_phb4_xscom_read(qts, PHB_PCIE_DLP_TRWCTL); > + g_assert_cmpuint(val & PPC_BIT(1), ==, 0x0); > + > + /* > + * Set all bits of PHB_LEM_ERROR_AND_MASK, PHB_LEM_ERROR_OR_MASK, > + * both regs are write-only and should be read as 0. > + */ > + pnv_phb4_xscom_write(qts, PHB_LEM_ERROR_AND_MASK, PPC_BITMASK(0, 63)); > + val = pnv_phb4_xscom_read(qts, PHB_LEM_ERROR_AND_MASK); > + g_assert_cmpuint(val, ==, 0x0); > + > + pnv_phb4_xscom_write(qts, PHB_LEM_ERROR_OR_MASK, PPC_BITMASK(0, 63)); > + val = pnv_phb4_xscom_read(qts, PHB_LEM_ERROR_OR_MASK); > + g_assert_cmpuint(val, ==, 0x0); > } > > static void test_phb4(void) > @@ -101,6 +154,9 @@ static void test_phb4(void) > /* Check sticky reset of a register */ > phb4_sticky_rst_test(qts); > > + /* Check write-only logic */ > + phb4_writeonly_read_test(qts); > + > qtest_quit(qts); > } >
diff --git a/hw/pci-host/pnv_phb4.c b/hw/pci-host/pnv_phb4.c index b3a83837f8..a81763f34c 100644 --- a/hw/pci-host/pnv_phb4.c +++ b/hw/pci-host/pnv_phb4.c @@ -735,6 +735,10 @@ static void pnv_phb4_reg_write(void *opaque, hwaddr off, uint64_t val, return; } + /* Update 'val' according to the register's RO-mask */ + val = (phb->regs[off >> 3] & phb->ro_mask[off >> 3]) | + (val & ~(phb->ro_mask[off >> 3])); + /* Record whether it changed */ changed = phb->regs[off >> 3] != val; @@ -808,7 +812,7 @@ static void pnv_phb4_reg_write(void *opaque, hwaddr off, uint64_t val, case PHB_TCE_TAG_ENABLE: case PHB_INT_NOTIFY_ADDR: case PHB_INT_NOTIFY_INDEX: - case PHB_DMARD_SYNC: + case PHB_DMA_SYNC: break; /* Noise on anything else */ @@ -846,7 +850,7 @@ static uint64_t pnv_phb4_reg_read(void *opaque, hwaddr off, unsigned size) case PHB_VERSION: return PNV_PHB4_PEC_GET_CLASS(phb->pec)->version; - /* Read-only */ + /* Read-only */ case PHB_PHB4_GEN_CAP: return 0xe4b8000000000000ull; case PHB_PHB4_TCE_CAP: @@ -856,18 +860,49 @@ static uint64_t pnv_phb4_reg_read(void *opaque, hwaddr off, unsigned size) case PHB_PHB4_EEH_CAP: return phb->big_phb ? 0x2000000000000000ull : 0x1000000000000000ull; + /* Write-only, read will return zeros */ + case PHB_LEM_ERROR_AND_MASK: + case PHB_LEM_ERROR_OR_MASK: + return 0; + case PHB_PCIE_DLP_TRWCTL: + val &= ~PHB_PCIE_DLP_TRWCTL_WREN; + return val; /* IODA table accesses */ case PHB_IODA_DATA0: return pnv_phb4_ioda_read(phb); + /* + * DMA sync: make it look like it's complete, + * clear write-only read/write start sync bits. + */ + case PHB_DMA_SYNC: + val = PHB_DMA_SYNC_RD_COMPLETE | + ~(PHB_DMA_SYNC_RD_START | PHB_DMA_SYNC_WR_START); + return val; + + /* + * PCI-E Stack registers + */ + case PHB_PCIE_SCR: + val |= PHB_PCIE_SCR_PLW_X16; /* RO bit */ + break; + /* Link training always appears trained */ case PHB_PCIE_DLP_TRAIN_CTL: /* TODO: Do something sensible with speed ? */ - return PHB_PCIE_DLP_INBAND_PRESENCE | PHB_PCIE_DLP_TL_LINKACT; + val |= PHB_PCIE_DLP_INBAND_PRESENCE | PHB_PCIE_DLP_TL_LINKACT; + return val; + + case PHB_PCIE_HOTPLUG_STATUS: + /* Clear write-only bit */ + val &= ~PHB_PCIE_HPSTAT_RESAMPLE; + return val; - /* DMA read sync: make it look like it's complete */ - case PHB_DMARD_SYNC: - return PHB_DMARD_SYNC_COMPLETE; + /* Link Management Register */ + case PHB_PCIE_LMR: + /* These write-only bits always read as 0 */ + val &= ~(PHB_PCIE_LMR_CHANGELW | PHB_PCIE_LMR_RETRAINLINK); + return val; /* Silent simple reads */ case PHB_LSI_SOURCE_ID: @@ -1712,6 +1747,33 @@ static PCIIOMMUOps pnv_phb4_iommu_ops = { .get_address_space = pnv_phb4_dma_iommu, }; +static void pnv_phb4_ro_mask_init(PnvPHB4 *phb) +{ + /* Clear RO-mask to make all regs as R/W by default */ + memset(phb->ro_mask, 0x0, PNV_PHB4_NUM_REGS * sizeof(uint64_t)); + + /* + * Set register specific RO-masks + */ + + /* PBL - Error Injection Register (0x1910) */ + phb->ro_mask[PHB_PBL_ERR_INJECT >> 3] = + PPC_BITMASK(0, 23) | PPC_BITMASK(28, 35) | PPC_BIT(38) | PPC_BIT(46) | + PPC_BITMASK(49, 51) | PPC_BITMASK(55, 63); + + /* Reserved bits[60:63] */ + phb->ro_mask[PHB_TXE_ERR_LEM_ENABLE >> 3] = + phb->ro_mask[PHB_TXE_ERR_AIB_FENCE_ENABLE >> 3] = PPC_BITMASK(60, 63); + /* Reserved bits[36:63] */ + phb->ro_mask[PHB_RXE_TCE_ERR_LEM_ENABLE >> 3] = + phb->ro_mask[PHB_RXE_TCE_ERR_AIB_FENCE_ENABLE >> 3] = PPC_BITMASK(36, 63); + /* Reserved bits[40:63] */ + phb->ro_mask[PHB_ERR_LEM_ENABLE >> 3] = + phb->ro_mask[PHB_ERR_AIB_FENCE_ENABLE >> 3] = PPC_BITMASK(40, 63); + + /* TODO: Add more RO-masks as regs are implemented in the model */ +} + static void pnv_phb4_err_reg_reset(PnvPHB4 *phb) { STICKY_RST(PHB_ERR_STATUS, 0, PPC_BITMASK(0, 33)); @@ -1782,6 +1844,9 @@ static void pnv_phb4_instance_init(Object *obj) /* XIVE interrupt source object */ object_initialize_child(obj, "source", &phb->xsrc, TYPE_XIVE_SOURCE); + + /* Initialize RO-mask of registers */ + pnv_phb4_ro_mask_init(phb); } void pnv_phb4_bus_init(DeviceState *dev, PnvPHB4 *phb) diff --git a/include/hw/pci-host/pnv_phb4.h b/include/hw/pci-host/pnv_phb4.h index 3212e68160..91e81eee0e 100644 --- a/include/hw/pci-host/pnv_phb4.h +++ b/include/hw/pci-host/pnv_phb4.h @@ -94,6 +94,13 @@ struct PnvPHB4 { uint64_t regs[PNV_PHB4_NUM_REGS]; MemoryRegion mr_regs; + /* + * Read-only bitmask for registers + * Bit value: 1 => RO bit + * 0 => RW bit + */ + uint64_t ro_mask[PNV_PHB4_NUM_REGS]; + /* Extra SCOM-only register */ uint64_t scom_hv_ind_addr_reg; diff --git a/include/hw/pci-host/pnv_phb4_regs.h b/include/hw/pci-host/pnv_phb4_regs.h index df5e86d29a..391d6a89ea 100644 --- a/include/hw/pci-host/pnv_phb4_regs.h +++ b/include/hw/pci-host/pnv_phb4_regs.h @@ -180,9 +180,11 @@ #define PHB_M64_AOMASK 0x1d0 #define PHB_M64_UPPER_BITS 0x1f0 #define PHB_NXLATE_PREFIX 0x1f8 -#define PHB_DMARD_SYNC 0x200 -#define PHB_DMARD_SYNC_START PPC_BIT(0) -#define PHB_DMARD_SYNC_COMPLETE PPC_BIT(1) +#define PHB_DMA_SYNC 0x200 +#define PHB_DMA_SYNC_RD_START PPC_BIT(0) +#define PHB_DMA_SYNC_RD_COMPLETE PPC_BIT(1) +#define PHB_DMA_SYNC_WR_START PPC_BIT(2) +#define PHB_DMA_SYNC_WR_COMPLETE PPC_BIT(3) #define PHB_RTC_INVALIDATE 0x208 #define PHB_RTC_INVALIDATE_ALL PPC_BIT(0) #define PHB_RTC_INVALIDATE_RID PPC_BITMASK(16, 31) @@ -395,8 +397,8 @@ #define PHB_PCIE_SCR 0x1A00 #define PHB_PCIE_SCR_SLOT_CAP PPC_BIT(15) #define PHB_PCIE_SCR_MAXLINKSPEED PPC_BITMASK(32, 35) +#define PHB_PCIE_SCR_PLW_X16 PPC_BIT(41) /* x16 */ #define PHB_PCIE_BNR 0x1A08 - #define PHB_PCIE_CRESET 0x1A10 #define PHB_PCIE_CRESET_CFG_CORE PPC_BIT(0) #define PHB_PCIE_CRESET_TLDLP PPC_BIT(1) @@ -405,7 +407,14 @@ #define PHB_PCIE_CRESET_PIPE_N PPC_BIT(4) #define PHB_PCIE_CRESET_REFCLK_N PPC_BIT(8) #define PHB_PCIE_HOTPLUG_STATUS 0x1A20 +#define PHB_PCIE_HPSTAT_SIMDIAG PPC_BIT(3) +#define PHB_PCIE_HPSTAT_RESAMPLE PPC_BIT(9) #define PHB_PCIE_HPSTAT_PRESENCE PPC_BIT(10) +#define PHB_PCIE_HPSTAT_LINKACTIVE PPC_BIT(12) +#define PHB_PCIE_LMR 0x1A30 +#define PHB_PCIE_LMR_CHANGELW PPC_BIT(0) +#define PHB_PCIE_LMR_RETRAINLINK PPC_BIT(1) +#define PHB_PCIE_LMR_LINKACTIVE PPC_BIT(8) #define PHB_PCIE_DLP_TRAIN_CTL 0x1A40 #define PHB_PCIE_DLP_LINK_WIDTH PPC_BITMASK(30, 35) @@ -433,7 +442,7 @@ #define PHB_PCIE_DLP_TRWCTL 0x1A80 #define PHB_PCIE_DLP_TRWCTL_EN PPC_BIT(0) - +#define PHB_PCIE_DLP_TRWCTL_WREN PPC_BIT(1) #define PHB_PCIE_DLP_ERRLOG1 0x1AA0 #define PHB_PCIE_DLP_ERRLOG2 0x1AA8 #define PHB_PCIE_DLP_ERR_STATUS 0x1AB0 diff --git a/tests/qtest/pnv-phb4-test.c b/tests/qtest/pnv-phb4-test.c index 708df3867c..0c8e58dd5f 100644 --- a/tests/qtest/pnv-phb4-test.c +++ b/tests/qtest/pnv-phb4-test.c @@ -75,7 +75,8 @@ static void phb4_sticky_rst_test(QTestState *qts) * Sticky reset test of PHB_PBL_ERR_STATUS. * * Write all 1's to reg PHB_PBL_ERR_INJECT. - * Updated value will be copied to reg PHB_PBL_ERR_STATUS. + * RO-only bits will not be written and + * updated value will be copied to reg PHB_PBL_ERR_STATUS. * * Reset PBL core by setting PHB_PCIE_CRESET_PBL in reg PHB_PCIE_CRESET. * Verify the sticky bits are still set. @@ -83,7 +84,59 @@ static void phb4_sticky_rst_test(QTestState *qts) pnv_phb4_xscom_write(qts, PHB_PBL_ERR_INJECT, PPC_BITMASK(0, 63)); pnv_phb4_xscom_write(qts, PHB_PCIE_CRESET, PHB_PCIE_CRESET_PBL); /*Reset*/ val = pnv_phb4_xscom_read(qts, PHB_PBL_ERR_STATUS); - g_assert_cmpuint(val, ==, (PPC_BITMASK(0, 9) | PPC_BITMASK(12, 63))); + g_assert_cmpuint(val, ==, 0xF00DFD8E00); +} + +/* Check that write-only bits/regs return 0 when read */ +static void phb4_writeonly_read_test(QTestState *qts) +{ + uint64_t val; + + /* + * Set all bits of PHB_DMA_SYNC, + * bits 0 and 2 are write-only and should be read as 0. + */ + pnv_phb4_xscom_write(qts, PHB_DMA_SYNC, PPC_BITMASK(0, 63)); + val = pnv_phb4_xscom_read(qts, PHB_DMA_SYNC); + g_assert_cmpuint(val & PPC_BIT(0), ==, 0x0); + g_assert_cmpuint(val & PPC_BIT(2), ==, 0x0); + + /* + * Set all bits of PHB_PCIE_HOTPLUG_STATUS, + * bit 9 is write-only and should be read as 0. + */ + pnv_phb4_xscom_write(qts, PHB_PCIE_HOTPLUG_STATUS, PPC_BITMASK(0, 63)); + val = pnv_phb4_xscom_read(qts, PHB_PCIE_HOTPLUG_STATUS); + g_assert_cmpuint(val & PPC_BIT(9), ==, 0x0); + + /* + * Set all bits of PHB_PCIE_LMR, + * bits 0 and 1 are write-only and should be read as 0. + */ + pnv_phb4_xscom_write(qts, PHB_PCIE_LMR, PPC_BITMASK(0, 63)); + val = pnv_phb4_xscom_read(qts, PHB_PCIE_LMR); + g_assert_cmpuint(val & PPC_BIT(0), ==, 0x0); + g_assert_cmpuint(val & PPC_BIT(1), ==, 0x0); + + /* + * Set all bits of PHB_PCIE_DLP_TRWCTL, + * write-only bit-1 should be read as 0. + */ + pnv_phb4_xscom_write(qts, PHB_PCIE_DLP_TRWCTL, PPC_BITMASK(0, 63)); + val = pnv_phb4_xscom_read(qts, PHB_PCIE_DLP_TRWCTL); + g_assert_cmpuint(val & PPC_BIT(1), ==, 0x0); + + /* + * Set all bits of PHB_LEM_ERROR_AND_MASK, PHB_LEM_ERROR_OR_MASK, + * both regs are write-only and should be read as 0. + */ + pnv_phb4_xscom_write(qts, PHB_LEM_ERROR_AND_MASK, PPC_BITMASK(0, 63)); + val = pnv_phb4_xscom_read(qts, PHB_LEM_ERROR_AND_MASK); + g_assert_cmpuint(val, ==, 0x0); + + pnv_phb4_xscom_write(qts, PHB_LEM_ERROR_OR_MASK, PPC_BITMASK(0, 63)); + val = pnv_phb4_xscom_read(qts, PHB_LEM_ERROR_OR_MASK); + g_assert_cmpuint(val, ==, 0x0); } static void test_phb4(void) @@ -101,6 +154,9 @@ static void test_phb4(void) /* Check sticky reset of a register */ phb4_sticky_rst_test(qts); + /* Check write-only logic */ + phb4_writeonly_read_test(qts); + qtest_quit(qts); }
SW cannot write the read-only(RO) bits of a register and write-only(WO) bits of a register return 0 when read. Added ro_mask[] for each register that defines which bits in that register are RO. When writing to a register, the RO-bits are not updated. When reading a register, clear the WO bits and return the updated value. Tested the registers PHB_DMA_SYNC, PHB_PCIE_HOTPLUG_STATUS, PHB_PCIE_LMR, PHB_PCIE_DLP_TRWCTL, PHB_LEM_ERROR_AND_MASK and PHB_LEM_ERROR_OR_MASK by writing all 1's and reading back the value. The WO bits in these registers should read back as 0. Signed-off-by: Saif Abrar <saif.abrar@linux.vnet.ibm.com> --- hw/pci-host/pnv_phb4.c | 77 ++++++++++++++++++++++++++--- include/hw/pci-host/pnv_phb4.h | 7 +++ include/hw/pci-host/pnv_phb4_regs.h | 19 +++++-- tests/qtest/pnv-phb4-test.c | 60 +++++++++++++++++++++- 4 files changed, 150 insertions(+), 13 deletions(-)