Message ID | 20240309072513.9418-2-atrajeev@linux.vnet.ibm.com (mailing list archive) |
---|---|
State | Handled Elsewhere, archived |
Headers | show |
Series | Add data type profiling support for powerpc | expand |
Le 09/03/2024 à 08:25, Athira Rajeev a écrit : > Add powerpc instruction nmemonic table to associate load/store > instructions with move_ops. mov_ops is used to identify mem_type > to associate instruction with data type and offset. Also initialize > and allocate arch specific fields for nr_instructions, instructions and > nr_instructions_allocate. > > Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> > --- > .../perf/arch/powerpc/annotate/instructions.c | 66 +++++++++++++++++++ > 1 file changed, 66 insertions(+) > > diff --git a/tools/perf/arch/powerpc/annotate/instructions.c b/tools/perf/arch/powerpc/annotate/instructions.c > index a3f423c27cae..07af4442be38 100644 > --- a/tools/perf/arch/powerpc/annotate/instructions.c > +++ b/tools/perf/arch/powerpc/annotate/instructions.c > @@ -1,6 +1,65 @@ > // SPDX-License-Identifier: GPL-2.0 > #include <linux/compiler.h> > > +/* > + * powerpc instruction nmemonic table to associate load/store instructions with > + * move_ops. mov_ops is used to identify mem_type to associate instruction with > + * data type and offset. > + */ > +static struct ins powerpc__instructions[] = { > + { .name = "lbz", .ops = &mov_ops, }, > + { .name = "lbzx", .ops = &mov_ops, }, > + { .name = "lbzu", .ops = &mov_ops, }, > + { .name = "lbzux", .ops = &mov_ops, }, > + { .name = "lhz", .ops = &mov_ops, }, > + { .name = "lhzx", .ops = &mov_ops, }, > + { .name = "lhzu", .ops = &mov_ops, }, > + { .name = "lhzux", .ops = &mov_ops, }, > + { .name = "lha", .ops = &mov_ops, }, > + { .name = "lhax", .ops = &mov_ops, }, > + { .name = "lhau", .ops = &mov_ops, }, > + { .name = "lhaux", .ops = &mov_ops, }, > + { .name = "lwz", .ops = &mov_ops, }, > + { .name = "lwzx", .ops = &mov_ops, }, > + { .name = "lwzu", .ops = &mov_ops, }, > + { .name = "lwzux", .ops = &mov_ops, }, > + { .name = "lwa", .ops = &mov_ops, }, > + { .name = "lwax", .ops = &mov_ops, }, > + { .name = "lwaux", .ops = &mov_ops, }, > + { .name = "ld", .ops = &mov_ops, }, > + { .name = "ldx", .ops = &mov_ops, }, > + { .name = "ldu", .ops = &mov_ops, }, > + { .name = "ldux", .ops = &mov_ops, }, > + { .name = "stb", .ops = &mov_ops, }, > + { .name = "stbx", .ops = &mov_ops, }, > + { .name = "stbu", .ops = &mov_ops, }, > + { .name = "stbux", .ops = &mov_ops, }, > + { .name = "sth", .ops = &mov_ops, }, > + { .name = "sthx", .ops = &mov_ops, }, > + { .name = "sthu", .ops = &mov_ops, }, > + { .name = "sthux", .ops = &mov_ops, }, > + { .name = "stw", .ops = &mov_ops, }, > + { .name = "stwx", .ops = &mov_ops, }, > + { .name = "stwu", .ops = &mov_ops, }, > + { .name = "stwux", .ops = &mov_ops, }, > + { .name = "std", .ops = &mov_ops, }, > + { .name = "stdx", .ops = &mov_ops, }, > + { .name = "stdu", .ops = &mov_ops, }, > + { .name = "stdux", .ops = &mov_ops, }, > + { .name = "lhbrx", .ops = &mov_ops, }, > + { .name = "sthbrx", .ops = &mov_ops, }, > + { .name = "lwbrx", .ops = &mov_ops, }, > + { .name = "stwbrx", .ops = &mov_ops, }, > + { .name = "ldbrx", .ops = &mov_ops, }, > + { .name = "stdbrx", .ops = &mov_ops, }, > + { .name = "lmw", .ops = &mov_ops, }, > + { .name = "stmw", .ops = &mov_ops, }, > + { .name = "lswi", .ops = &mov_ops, }, > + { .name = "lswx", .ops = &mov_ops, }, > + { .name = "stswi", .ops = &mov_ops, }, > + { .name = "stswx", .ops = &mov_ops, }, > +}; What about lwarx and stwcx ? > + > static struct ins_ops *powerpc__associate_instruction_ops(struct arch *arch, const char *name) > { > int i; > @@ -52,6 +111,13 @@ static struct ins_ops *powerpc__associate_instruction_ops(struct arch *arch, con > static int powerpc__annotate_init(struct arch *arch, char *cpuid __maybe_unused) > { > if (!arch->initialized) { > + arch->nr_instructions = ARRAY_SIZE(powerpc__instructions); > + arch->instructions = calloc(arch->nr_instructions, sizeof(struct ins)); > + if (arch->instructions == NULL) Prefered form is if (!arch->instructions) > + return -ENOMEM; > + > + memcpy(arch->instructions, (struct ins *)powerpc__instructions, sizeof(struct ins) * arch->nr_instructions); No need to cast powerpc__instructions, it is already a pointer. > + arch->nr_instructions_allocated = arch->nr_instructions; > arch->initialized = true; > arch->associate_instruction_ops = powerpc__associate_instruction_ops; > arch->objdump.comment_char = '#';
> On 09-Mar-2024, at 3:18 PM, Christophe Leroy <christophe.leroy@csgroup.eu> wrote: > > > > Le 09/03/2024 à 08:25, Athira Rajeev a écrit : >> Add powerpc instruction nmemonic table to associate load/store >> instructions with move_ops. mov_ops is used to identify mem_type >> to associate instruction with data type and offset. Also initialize >> and allocate arch specific fields for nr_instructions, instructions and >> nr_instructions_allocate. >> >> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> >> --- >> .../perf/arch/powerpc/annotate/instructions.c | 66 +++++++++++++++++++ >> 1 file changed, 66 insertions(+) >> >> diff --git a/tools/perf/arch/powerpc/annotate/instructions.c b/tools/perf/arch/powerpc/annotate/instructions.c >> index a3f423c27cae..07af4442be38 100644 >> --- a/tools/perf/arch/powerpc/annotate/instructions.c >> +++ b/tools/perf/arch/powerpc/annotate/instructions.c >> @@ -1,6 +1,65 @@ >> // SPDX-License-Identifier: GPL-2.0 >> #include <linux/compiler.h> >> >> +/* >> + * powerpc instruction nmemonic table to associate load/store instructions with >> + * move_ops. mov_ops is used to identify mem_type to associate instruction with >> + * data type and offset. >> + */ >> +static struct ins powerpc__instructions[] = { >> + { .name = "lbz", .ops = &mov_ops, }, >> + { .name = "lbzx", .ops = &mov_ops, }, >> + { .name = "lbzu", .ops = &mov_ops, }, >> + { .name = "lbzux", .ops = &mov_ops, }, >> + { .name = "lhz", .ops = &mov_ops, }, >> + { .name = "lhzx", .ops = &mov_ops, }, >> + { .name = "lhzu", .ops = &mov_ops, }, >> + { .name = "lhzux", .ops = &mov_ops, }, >> + { .name = "lha", .ops = &mov_ops, }, >> + { .name = "lhax", .ops = &mov_ops, }, >> + { .name = "lhau", .ops = &mov_ops, }, >> + { .name = "lhaux", .ops = &mov_ops, }, >> + { .name = "lwz", .ops = &mov_ops, }, >> + { .name = "lwzx", .ops = &mov_ops, }, >> + { .name = "lwzu", .ops = &mov_ops, }, >> + { .name = "lwzux", .ops = &mov_ops, }, >> + { .name = "lwa", .ops = &mov_ops, }, >> + { .name = "lwax", .ops = &mov_ops, }, >> + { .name = "lwaux", .ops = &mov_ops, }, >> + { .name = "ld", .ops = &mov_ops, }, >> + { .name = "ldx", .ops = &mov_ops, }, >> + { .name = "ldu", .ops = &mov_ops, }, >> + { .name = "ldux", .ops = &mov_ops, }, >> + { .name = "stb", .ops = &mov_ops, }, >> + { .name = "stbx", .ops = &mov_ops, }, >> + { .name = "stbu", .ops = &mov_ops, }, >> + { .name = "stbux", .ops = &mov_ops, }, >> + { .name = "sth", .ops = &mov_ops, }, >> + { .name = "sthx", .ops = &mov_ops, }, >> + { .name = "sthu", .ops = &mov_ops, }, >> + { .name = "sthux", .ops = &mov_ops, }, >> + { .name = "stw", .ops = &mov_ops, }, >> + { .name = "stwx", .ops = &mov_ops, }, >> + { .name = "stwu", .ops = &mov_ops, }, >> + { .name = "stwux", .ops = &mov_ops, }, >> + { .name = "std", .ops = &mov_ops, }, >> + { .name = "stdx", .ops = &mov_ops, }, >> + { .name = "stdu", .ops = &mov_ops, }, >> + { .name = "stdux", .ops = &mov_ops, }, >> + { .name = "lhbrx", .ops = &mov_ops, }, >> + { .name = "sthbrx", .ops = &mov_ops, }, >> + { .name = "lwbrx", .ops = &mov_ops, }, >> + { .name = "stwbrx", .ops = &mov_ops, }, >> + { .name = "ldbrx", .ops = &mov_ops, }, >> + { .name = "stdbrx", .ops = &mov_ops, }, >> + { .name = "lmw", .ops = &mov_ops, }, >> + { .name = "stmw", .ops = &mov_ops, }, >> + { .name = "lswi", .ops = &mov_ops, }, >> + { .name = "lswx", .ops = &mov_ops, }, >> + { .name = "stswi", .ops = &mov_ops, }, >> + { .name = "stswx", .ops = &mov_ops, }, >> +}; > > What about lwarx and stwcx ? Yes, Will add those in next version > >> + >> static struct ins_ops *powerpc__associate_instruction_ops(struct arch *arch, const char *name) >> { >> int i; >> @@ -52,6 +111,13 @@ static struct ins_ops *powerpc__associate_instruction_ops(struct arch *arch, con >> static int powerpc__annotate_init(struct arch *arch, char *cpuid __maybe_unused) >> { >> if (!arch->initialized) { >> + arch->nr_instructions = ARRAY_SIZE(powerpc__instructions); >> + arch->instructions = calloc(arch->nr_instructions, sizeof(struct ins)); >> + if (arch->instructions == NULL) > > Prefered form is > > if (!arch->instructions) Ok , will make this change > >> + return -ENOMEM; >> + >> + memcpy(arch->instructions, (struct ins *)powerpc__instructions, sizeof(struct ins) * arch->nr_instructions); > > No need to cast powerpc__instructions, it is already a pointer. Yes, I will correct it Thanks Athira Rajeev > > >> + arch->nr_instructions_allocated = arch->nr_instructions; >> arch->initialized = true; >> arch->associate_instruction_ops = powerpc__associate_instruction_ops; >> arch->objdump.comment_char = '#';
diff --git a/tools/perf/arch/powerpc/annotate/instructions.c b/tools/perf/arch/powerpc/annotate/instructions.c index a3f423c27cae..07af4442be38 100644 --- a/tools/perf/arch/powerpc/annotate/instructions.c +++ b/tools/perf/arch/powerpc/annotate/instructions.c @@ -1,6 +1,65 @@ // SPDX-License-Identifier: GPL-2.0 #include <linux/compiler.h> +/* + * powerpc instruction nmemonic table to associate load/store instructions with + * move_ops. mov_ops is used to identify mem_type to associate instruction with + * data type and offset. + */ +static struct ins powerpc__instructions[] = { + { .name = "lbz", .ops = &mov_ops, }, + { .name = "lbzx", .ops = &mov_ops, }, + { .name = "lbzu", .ops = &mov_ops, }, + { .name = "lbzux", .ops = &mov_ops, }, + { .name = "lhz", .ops = &mov_ops, }, + { .name = "lhzx", .ops = &mov_ops, }, + { .name = "lhzu", .ops = &mov_ops, }, + { .name = "lhzux", .ops = &mov_ops, }, + { .name = "lha", .ops = &mov_ops, }, + { .name = "lhax", .ops = &mov_ops, }, + { .name = "lhau", .ops = &mov_ops, }, + { .name = "lhaux", .ops = &mov_ops, }, + { .name = "lwz", .ops = &mov_ops, }, + { .name = "lwzx", .ops = &mov_ops, }, + { .name = "lwzu", .ops = &mov_ops, }, + { .name = "lwzux", .ops = &mov_ops, }, + { .name = "lwa", .ops = &mov_ops, }, + { .name = "lwax", .ops = &mov_ops, }, + { .name = "lwaux", .ops = &mov_ops, }, + { .name = "ld", .ops = &mov_ops, }, + { .name = "ldx", .ops = &mov_ops, }, + { .name = "ldu", .ops = &mov_ops, }, + { .name = "ldux", .ops = &mov_ops, }, + { .name = "stb", .ops = &mov_ops, }, + { .name = "stbx", .ops = &mov_ops, }, + { .name = "stbu", .ops = &mov_ops, }, + { .name = "stbux", .ops = &mov_ops, }, + { .name = "sth", .ops = &mov_ops, }, + { .name = "sthx", .ops = &mov_ops, }, + { .name = "sthu", .ops = &mov_ops, }, + { .name = "sthux", .ops = &mov_ops, }, + { .name = "stw", .ops = &mov_ops, }, + { .name = "stwx", .ops = &mov_ops, }, + { .name = "stwu", .ops = &mov_ops, }, + { .name = "stwux", .ops = &mov_ops, }, + { .name = "std", .ops = &mov_ops, }, + { .name = "stdx", .ops = &mov_ops, }, + { .name = "stdu", .ops = &mov_ops, }, + { .name = "stdux", .ops = &mov_ops, }, + { .name = "lhbrx", .ops = &mov_ops, }, + { .name = "sthbrx", .ops = &mov_ops, }, + { .name = "lwbrx", .ops = &mov_ops, }, + { .name = "stwbrx", .ops = &mov_ops, }, + { .name = "ldbrx", .ops = &mov_ops, }, + { .name = "stdbrx", .ops = &mov_ops, }, + { .name = "lmw", .ops = &mov_ops, }, + { .name = "stmw", .ops = &mov_ops, }, + { .name = "lswi", .ops = &mov_ops, }, + { .name = "lswx", .ops = &mov_ops, }, + { .name = "stswi", .ops = &mov_ops, }, + { .name = "stswx", .ops = &mov_ops, }, +}; + static struct ins_ops *powerpc__associate_instruction_ops(struct arch *arch, const char *name) { int i; @@ -52,6 +111,13 @@ static struct ins_ops *powerpc__associate_instruction_ops(struct arch *arch, con static int powerpc__annotate_init(struct arch *arch, char *cpuid __maybe_unused) { if (!arch->initialized) { + arch->nr_instructions = ARRAY_SIZE(powerpc__instructions); + arch->instructions = calloc(arch->nr_instructions, sizeof(struct ins)); + if (arch->instructions == NULL) + return -ENOMEM; + + memcpy(arch->instructions, (struct ins *)powerpc__instructions, sizeof(struct ins) * arch->nr_instructions); + arch->nr_instructions_allocated = arch->nr_instructions; arch->initialized = true; arch->associate_instruction_ops = powerpc__associate_instruction_ops; arch->objdump.comment_char = '#';
Add powerpc instruction nmemonic table to associate load/store instructions with move_ops. mov_ops is used to identify mem_type to associate instruction with data type and offset. Also initialize and allocate arch specific fields for nr_instructions, instructions and nr_instructions_allocate. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> --- .../perf/arch/powerpc/annotate/instructions.c | 66 +++++++++++++++++++ 1 file changed, 66 insertions(+)