Message ID | 20230928125943.1816922-16-zhao1.liu@linux.intel.com |
---|---|
State | New |
Headers | show |
Series | tests: Add CPU topology related smbios test cases | expand |
On Thu, Sep 28, 2023 at 08:59:42PM +0800, Zhao Liu wrote: > From: Zhao Liu <zhao1.liu@intel.com> > > This tests the commit 7298fd7de5551 ("hw/smbios: Fix thread count in > type4"). > > In smbios_build_type_4_table() (hw/smbios/smbios.c), if the number of > threads in the socket is more than 255, then smbios type4 table encodes > threads per socket into the thread count2 field. > > So for the topology in this case, there're the following considerations: > 1. threads per socket should be more than 255 to ensure we could cover > the thread count2 field. > 2. The original bug was that threads per socket was miscalculated, so > now we should configure as many topology levels as possible (mutiple > sockets & dies, no module since x86 hasn't supported it) to cover > more general topology scenarios, to ensure that the threads per > socket encoded in the thread count2 field is correct. > 3. For the more general topology, we should also add "cpus" (presented > threads for machine) and "maxcpus" (total threads for machine) to > make sure that configuring unpluged CPUs in smp (cpus < maxcpus) > does not affect the correctness of threads per socket for thread > count2 field. > > Based on these considerations, select the topology as the follow: > > -smp cpus=210,maxcpus=520,sockets=2,dies=2,cores=65,threads=2 > > The expected thread count2 = threads per socket = threads (2) > * cores (65) * dies (2) = 260. > > Suggested-by: Igor Mammedov <imammedo@redhat.com> > Signed-off-by: Zhao Liu <zhao1.liu@intel.com> There's a problem here: not all hosts support such high number of vCPUs. Number of hotpluggable cpus requested (520) exceeds the maximum cpus supported by KVM (288) socket_accept failed: Resource temporarily unavailable ** Dropped for now pls come up with a solution. > --- > Changes since v1: > * Dropped the extra variable: uint64_t thread_count2_addr. (Igor) > * Added description of the consideration for topology selection of this > case in commit message. (Igor) > --- > tests/qtest/bios-tables-test.c | 31 +++++++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/tests/qtest/bios-tables-test.c b/tests/qtest/bios-tables-test.c > index f8e3e349e09f..58119d8979c6 100644 > --- a/tests/qtest/bios-tables-test.c > +++ b/tests/qtest/bios-tables-test.c > @@ -96,6 +96,7 @@ typedef struct { > uint8_t smbios_core_count; > uint16_t smbios_core_count2; > uint8_t smbios_thread_count; > + uint16_t smbios_thread_count2; > uint8_t *required_struct_types; > int required_struct_types_len; > int type4_count; > @@ -644,6 +645,7 @@ static void smbios_cpu_test(test_data *data, uint32_t addr, > uint8_t thread_count, expected_thread_count = data->smbios_thread_count; > uint16_t speed, expected_speed[2]; > uint16_t core_count2, expected_core_count2 = data->smbios_core_count2; > + uint16_t thread_count2, expected_thread_count2 = data->smbios_thread_count2; > int offset[2]; > int i; > > @@ -680,6 +682,15 @@ static void smbios_cpu_test(test_data *data, uint32_t addr, > if (expected_core_count == 0xFF && expected_core_count2) { > g_assert_cmpuint(core_count2, ==, expected_core_count2); > } > + > + thread_count2 = qtest_readw(data->qts, > + addr + offsetof(struct smbios_type_4, > + thread_count2)); > + > + /* Thread Count has reached its limit, checking Thread Count 2 */ > + if (expected_thread_count == 0xFF && expected_thread_count2) { > + g_assert_cmpuint(thread_count2, ==, expected_thread_count2); > + } > } > } > > @@ -1050,6 +1061,7 @@ static void test_acpi_q35_tcg_thread_count(void) > .required_struct_types = base_required_struct_types, > .required_struct_types_len = ARRAY_SIZE(base_required_struct_types), > .smbios_thread_count = 27, > + .smbios_thread_count2 = 27, > }; > > test_acpi_one("-machine smbios-entry-point-type=64 " > @@ -1058,6 +1070,23 @@ static void test_acpi_q35_tcg_thread_count(void) > free_test_data(&data); > } > > +static void test_acpi_q35_tcg_thread_count2(void) > +{ > + test_data data = { > + .machine = MACHINE_Q35, > + .variant = ".thread-count2", > + .required_struct_types = base_required_struct_types, > + .required_struct_types_len = ARRAY_SIZE(base_required_struct_types), > + .smbios_thread_count = 0xFF, > + .smbios_thread_count2 = 260, > + }; > + > + test_acpi_one("-machine smbios-entry-point-type=64 " > + "-smp cpus=210,maxcpus=520,sockets=2,dies=2,cores=65,threads=2", > + &data); > + free_test_data(&data); > +} > + > static void test_acpi_q35_tcg_bridge(void) > { > test_data data = {}; > @@ -2216,6 +2245,8 @@ int main(int argc, char *argv[]) > test_acpi_q35_tcg_core_count2); > qtest_add_func("acpi/q35/thread-count", > test_acpi_q35_tcg_thread_count); > + qtest_add_func("acpi/q35/thread-count2", > + test_acpi_q35_tcg_thread_count2); > } > if (qtest_has_device("virtio-iommu-pci")) { > qtest_add_func("acpi/q35/viot", test_acpi_q35_viot); > -- > 2.34.1
Hi Michael, On Sun, Oct 22, 2023 at 05:17:29AM -0400, Michael S. Tsirkin wrote: > Date: Sun, 22 Oct 2023 05:17:29 -0400 > From: "Michael S. Tsirkin" <mst@redhat.com> > Subject: Re: [PATCH v2 15/16] tests: bios-tables-test: Add test for smbios > type4 thread count2 > > On Thu, Sep 28, 2023 at 08:59:42PM +0800, Zhao Liu wrote: > > From: Zhao Liu <zhao1.liu@intel.com> > > > > This tests the commit 7298fd7de5551 ("hw/smbios: Fix thread count in > > type4"). > > > > In smbios_build_type_4_table() (hw/smbios/smbios.c), if the number of > > threads in the socket is more than 255, then smbios type4 table encodes > > threads per socket into the thread count2 field. > > > > So for the topology in this case, there're the following considerations: > > 1. threads per socket should be more than 255 to ensure we could cover > > the thread count2 field. > > 2. The original bug was that threads per socket was miscalculated, so > > now we should configure as many topology levels as possible (mutiple > > sockets & dies, no module since x86 hasn't supported it) to cover > > more general topology scenarios, to ensure that the threads per > > socket encoded in the thread count2 field is correct. > > 3. For the more general topology, we should also add "cpus" (presented > > threads for machine) and "maxcpus" (total threads for machine) to > > make sure that configuring unpluged CPUs in smp (cpus < maxcpus) > > does not affect the correctness of threads per socket for thread > > count2 field. > > > > Based on these considerations, select the topology as the follow: > > > > -smp cpus=210,maxcpus=520,sockets=2,dies=2,cores=65,threads=2 > > > > The expected thread count2 = threads per socket = threads (2) > > * cores (65) * dies (2) = 260. > > > > Suggested-by: Igor Mammedov <imammedo@redhat.com> > > Signed-off-by: Zhao Liu <zhao1.liu@intel.com> > > There's a problem here: not all hosts support such high > number of vCPUs. > Number of hotpluggable cpus requested (520) exceeds the maximum cpus > supported by KVM (288) > socket_accept failed: Resource temporarily unavailable > ** > > Dropped for now pls come up with a solution. I'll drop multiple sockets/dies for this case. The previsou thread count test has already covered the complex topology level case so that for thread count2 we can not configure so many sockets/dies, just check that there are more than 255 threads in a socket. I'll refresh a new version. Regards, Zhao > > > > --- > > Changes since v1: > > * Dropped the extra variable: uint64_t thread_count2_addr. (Igor) > > * Added description of the consideration for topology selection of this > > case in commit message. (Igor) > > --- > > tests/qtest/bios-tables-test.c | 31 +++++++++++++++++++++++++++++++ > > 1 file changed, 31 insertions(+) > > > > diff --git a/tests/qtest/bios-tables-test.c b/tests/qtest/bios-tables-test.c > > index f8e3e349e09f..58119d8979c6 100644 > > --- a/tests/qtest/bios-tables-test.c > > +++ b/tests/qtest/bios-tables-test.c > > @@ -96,6 +96,7 @@ typedef struct { > > uint8_t smbios_core_count; > > uint16_t smbios_core_count2; > > uint8_t smbios_thread_count; > > + uint16_t smbios_thread_count2; > > uint8_t *required_struct_types; > > int required_struct_types_len; > > int type4_count; > > @@ -644,6 +645,7 @@ static void smbios_cpu_test(test_data *data, uint32_t addr, > > uint8_t thread_count, expected_thread_count = data->smbios_thread_count; > > uint16_t speed, expected_speed[2]; > > uint16_t core_count2, expected_core_count2 = data->smbios_core_count2; > > + uint16_t thread_count2, expected_thread_count2 = data->smbios_thread_count2; > > int offset[2]; > > int i; > > > > @@ -680,6 +682,15 @@ static void smbios_cpu_test(test_data *data, uint32_t addr, > > if (expected_core_count == 0xFF && expected_core_count2) { > > g_assert_cmpuint(core_count2, ==, expected_core_count2); > > } > > + > > + thread_count2 = qtest_readw(data->qts, > > + addr + offsetof(struct smbios_type_4, > > + thread_count2)); > > + > > + /* Thread Count has reached its limit, checking Thread Count 2 */ > > + if (expected_thread_count == 0xFF && expected_thread_count2) { > > + g_assert_cmpuint(thread_count2, ==, expected_thread_count2); > > + } > > } > > } > > > > @@ -1050,6 +1061,7 @@ static void test_acpi_q35_tcg_thread_count(void) > > .required_struct_types = base_required_struct_types, > > .required_struct_types_len = ARRAY_SIZE(base_required_struct_types), > > .smbios_thread_count = 27, > > + .smbios_thread_count2 = 27, > > }; > > > > test_acpi_one("-machine smbios-entry-point-type=64 " > > @@ -1058,6 +1070,23 @@ static void test_acpi_q35_tcg_thread_count(void) > > free_test_data(&data); > > } > > > > +static void test_acpi_q35_tcg_thread_count2(void) > > +{ > > + test_data data = { > > + .machine = MACHINE_Q35, > > + .variant = ".thread-count2", > > + .required_struct_types = base_required_struct_types, > > + .required_struct_types_len = ARRAY_SIZE(base_required_struct_types), > > + .smbios_thread_count = 0xFF, > > + .smbios_thread_count2 = 260, > > + }; > > + > > + test_acpi_one("-machine smbios-entry-point-type=64 " > > + "-smp cpus=210,maxcpus=520,sockets=2,dies=2,cores=65,threads=2", > > + &data); > > + free_test_data(&data); > > +} > > + > > static void test_acpi_q35_tcg_bridge(void) > > { > > test_data data = {}; > > @@ -2216,6 +2245,8 @@ int main(int argc, char *argv[]) > > test_acpi_q35_tcg_core_count2); > > qtest_add_func("acpi/q35/thread-count", > > test_acpi_q35_tcg_thread_count); > > + qtest_add_func("acpi/q35/thread-count2", > > + test_acpi_q35_tcg_thread_count2); > > } > > if (qtest_has_device("virtio-iommu-pci")) { > > qtest_add_func("acpi/q35/viot", test_acpi_q35_viot); > > -- > > 2.34.1 >
diff --git a/tests/qtest/bios-tables-test.c b/tests/qtest/bios-tables-test.c index f8e3e349e09f..58119d8979c6 100644 --- a/tests/qtest/bios-tables-test.c +++ b/tests/qtest/bios-tables-test.c @@ -96,6 +96,7 @@ typedef struct { uint8_t smbios_core_count; uint16_t smbios_core_count2; uint8_t smbios_thread_count; + uint16_t smbios_thread_count2; uint8_t *required_struct_types; int required_struct_types_len; int type4_count; @@ -644,6 +645,7 @@ static void smbios_cpu_test(test_data *data, uint32_t addr, uint8_t thread_count, expected_thread_count = data->smbios_thread_count; uint16_t speed, expected_speed[2]; uint16_t core_count2, expected_core_count2 = data->smbios_core_count2; + uint16_t thread_count2, expected_thread_count2 = data->smbios_thread_count2; int offset[2]; int i; @@ -680,6 +682,15 @@ static void smbios_cpu_test(test_data *data, uint32_t addr, if (expected_core_count == 0xFF && expected_core_count2) { g_assert_cmpuint(core_count2, ==, expected_core_count2); } + + thread_count2 = qtest_readw(data->qts, + addr + offsetof(struct smbios_type_4, + thread_count2)); + + /* Thread Count has reached its limit, checking Thread Count 2 */ + if (expected_thread_count == 0xFF && expected_thread_count2) { + g_assert_cmpuint(thread_count2, ==, expected_thread_count2); + } } } @@ -1050,6 +1061,7 @@ static void test_acpi_q35_tcg_thread_count(void) .required_struct_types = base_required_struct_types, .required_struct_types_len = ARRAY_SIZE(base_required_struct_types), .smbios_thread_count = 27, + .smbios_thread_count2 = 27, }; test_acpi_one("-machine smbios-entry-point-type=64 " @@ -1058,6 +1070,23 @@ static void test_acpi_q35_tcg_thread_count(void) free_test_data(&data); } +static void test_acpi_q35_tcg_thread_count2(void) +{ + test_data data = { + .machine = MACHINE_Q35, + .variant = ".thread-count2", + .required_struct_types = base_required_struct_types, + .required_struct_types_len = ARRAY_SIZE(base_required_struct_types), + .smbios_thread_count = 0xFF, + .smbios_thread_count2 = 260, + }; + + test_acpi_one("-machine smbios-entry-point-type=64 " + "-smp cpus=210,maxcpus=520,sockets=2,dies=2,cores=65,threads=2", + &data); + free_test_data(&data); +} + static void test_acpi_q35_tcg_bridge(void) { test_data data = {}; @@ -2216,6 +2245,8 @@ int main(int argc, char *argv[]) test_acpi_q35_tcg_core_count2); qtest_add_func("acpi/q35/thread-count", test_acpi_q35_tcg_thread_count); + qtest_add_func("acpi/q35/thread-count2", + test_acpi_q35_tcg_thread_count2); } if (qtest_has_device("virtio-iommu-pci")) { qtest_add_func("acpi/q35/viot", test_acpi_q35_viot);