Message ID | 169402313576.1071869.18233618318394691773.stgit@jupiter (mailing list archive) |
---|---|
State | RFC |
Headers | show |
Series | [RFC] powerpc: Make crashing cpu to be discovered first in kdump kernel. | expand |
Context | Check | Description |
---|---|---|
snowpatch_ozlabs/github-powerpc_ppctests | success | Successfully ran 8 jobs. |
snowpatch_ozlabs/github-powerpc_sparse | fail | sparse (mpc885_ads_defconfig, fedora-37, ppc64) failed at step Build. |
snowpatch_ozlabs/github-powerpc_selftests | success | Successfully ran 8 jobs. |
snowpatch_ozlabs/github-powerpc_kernel_qemu | fail | 2 of 18 jobs failed. |
snowpatch_ozlabs/github-powerpc_clang | fail | 3 of 6 jobs failed. |
Hi Mahesh, Thanks for sharing your great idea. I was in the middle of V5 and finish it today. My v5 is based on the same idea of my v4 [1] with the improvement of the code. And I will send it out. [1]: https://lore.kernel.org/linuxppc-dev/1520829790-14029-1-git-send-email-kernelfans@gmail.com/ I will have a close look at your patch later. Thanks, Pingfan On Thu, Sep 7, 2023 at 1:59 AM Mahesh Salgaonkar <mahesh@linux.ibm.com> wrote: > > The kernel boot parameter 'nr_cpus=' allows one to specify number of > possible cpus in the system. In the normal scenario the first cpu (cpu0) > that shows up is the boot cpu and hence it gets covered under nr_cpus > limit. > > But this assumption is broken in kdump scenario where kdump kernel after a > crash can boot up on an non-zero boot cpu. The paca structure allocation > depends on value of nr_cpus and is indexed using logical cpu ids. The cpu > discovery code brings up the cpus as they appear sequentially on device > tree and assigns logical cpu ids starting from 0. This definitely becomes > an issue if boot cpu id > nr_cpus. When this occurs it results into > > In past there were proposals to fix this by making changes to cpu discovery > code to identify non-zero boot cpu and map it to logical cpu 0. However, > the changes were very invasive, making discovery code more complicated and > risky. > > Considering that the non-zero boot cpu scenario is more specific to kdump > kernel, limiting the changes in panic/crash kexec path would probably be a > best approach to have. > > Hence proposed change is, in crash kexec path, move the crashing cpu's > device node to the first position under '/cpus' node, which will make the > crashing cpu to be discovered as part of the first core in kdump kernel. > > In order to accommodate boot cpu for the case where boot_cpuid > nr_cpu_ids, > align up the nr_cpu_ids to SMT threads in early_init_dt_scan_cpus(). This > will allow kdump kernel to work with nr_cpus=X where X will be aligned up > in multiple of SMT threads per core. > > Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> > --- > arch/powerpc/include/asm/kexec.h | 1 > arch/powerpc/kernel/prom.c | 13 ++++ > arch/powerpc/kexec/core_64.c | 128 +++++++++++++++++++++++++++++++++++++ > arch/powerpc/kexec/file_load_64.c | 2 - > 4 files changed, 143 insertions(+), 1 deletion(-) > > diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h > index a1ddba01e7d13..f5a6f4a1b8eb0 100644 > --- a/arch/powerpc/include/asm/kexec.h > +++ b/arch/powerpc/include/asm/kexec.h > @@ -144,6 +144,7 @@ unsigned int kexec_extra_fdt_size_ppc64(struct kimage *image); > int setup_new_fdt_ppc64(const struct kimage *image, void *fdt, > unsigned long initrd_load_addr, > unsigned long initrd_len, const char *cmdline); > +int add_node_props(void *fdt, int node_offset, const struct device_node *dn); > #endif /* CONFIG_PPC64 */ > > #endif /* CONFIG_KEXEC_FILE */ > diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c > index 0b5878c3125b1..c2d4f55042d72 100644 > --- a/arch/powerpc/kernel/prom.c > +++ b/arch/powerpc/kernel/prom.c > @@ -322,6 +322,9 @@ static void __init check_cpu_feature_properties(unsigned long node) > } > } > > +/* align addr on a size boundary - adjust address up */ > +#define _ALIGN_UP(addr, size) (((addr)+((size)-1))&(~((typeof(addr))(size)-1))) > + > static int __init early_init_dt_scan_cpus(unsigned long node, > const char *uname, int depth, > void *data) > @@ -348,6 +351,16 @@ static int __init early_init_dt_scan_cpus(unsigned long node, > > nthreads = len / sizeof(int); > > + /* > + * Align nr_cpu_ids to correct SMT value. This will help us to allocate > + * pacas correctly to accomodate boot_cpu != 0 scenario e.g. in kdump > + * kernel the boot cpu can be any cpu between 0 through nthreads. > + */ > + if (nr_cpu_ids % nthreads) { > + nr_cpu_ids = _ALIGN_UP(nr_cpu_ids, nthreads); > + pr_info("Aligned nr_cpus to SMT=%d, nr_cpu_ids = %d\n", nthreads, nr_cpu_ids); > + } > + > /* > * Now see if any of these threads match our boot cpu. > * NOTE: This must match the parsing done in smp_setup_cpu_maps. > diff --git a/arch/powerpc/kexec/core_64.c b/arch/powerpc/kexec/core_64.c > index a79e28c91e2be..168bef43e22c2 100644 > --- a/arch/powerpc/kexec/core_64.c > +++ b/arch/powerpc/kexec/core_64.c > @@ -17,6 +17,7 @@ > #include <linux/cpu.h> > #include <linux/hardirq.h> > #include <linux/of.h> > +#include <linux/libfdt.h> > > #include <asm/page.h> > #include <asm/current.h> > @@ -298,6 +299,119 @@ extern void kexec_sequence(void *newstack, unsigned long start, > void (*clear_all)(void), > bool copy_with_mmu_off) __noreturn; > > +/* > + * Move the crashing cpus FDT node as the first node under '/cpus' node. > + * > + * - Get the FDT segment from the crash image segments. > + * - Locate the crashing CPUs fdt subnode 'A' under '/cpus' node. > + * - Now locate the crashing cpu device node 'B' from of_root device tree. > + * - Delete the crashing cpu FDT node 'A' from kexec FDT segment. > + * - Insert the crashing cpu device node 'B' into kexec FDT segment as first > + * subnode under '/cpus' node. > + */ > +static void move_crashing_cpu(struct kimage *image) > +{ > + void *fdt, *ptr; > + const char *pathp = NULL; > + unsigned long mem; > + const __be32 *intserv; > + struct device_node *dn; > + bool first_node = true; > + int cpus_offset, offset, fdt_index = -1; > + int initial_depth, depth, len, i, ret, nthreads; > + > + /* Find the FDT segment index in kexec segment array. */ > + for (i = 0; i < image->nr_segments; i++) { > + mem = image->segment[i].mem; > + ptr = __va(mem); > + if (ptr && fdt_magic(ptr) == FDT_MAGIC) { > + fdt_index = i; > + break; > + } > + } > + if (fdt_index < 0) { > + pr_err("Unable to locate FDT segment.\n"); > + return; > + } > + > + fdt = __va((void *)image->segment[fdt_index].mem); > + > + offset = cpus_offset = fdt_path_offset(fdt, "/cpus"); > + if (cpus_offset < 0) { > + if (cpus_offset != -FDT_ERR_NOTFOUND) > + pr_err("Malformed device tree: error reading /cpus node: %s\n", > + fdt_strerror(cpus_offset)); > + return; > + } > + > + /* Locate crashing cpus fdt node */ > + initial_depth = depth = 0; > + for (offset = fdt_next_node(fdt, offset, &depth); > + offset >= 0 && depth > initial_depth; > + offset = fdt_next_node(fdt, offset, &depth)) { > + > + > + intserv = fdt_getprop(fdt, offset, "ibm,ppc-interrupt-server#s", &len); > + if (!intserv) { > + pr_err("Unable to fetch ibm,ppc-interrupt-server#s property\n"); > + return; > + } > + > + /* Find the match for crashing cpus phys id. */ > + nthreads = len / sizeof(int); > + for (i = 0; i < nthreads; i++) { > + if (be32_to_cpu(intserv[i]) == get_paca()->hw_cpu_id) > + break; > + } > + if (i < nthreads) { > + /* Found the match */ > + pathp = fdt_get_name(fdt, offset, NULL); > + break; > + } > + > + first_node = false; > + } > + > + /* > + * Nothing to be done if crashing cpu's fdt node is already at first > + * position OR crashing cpu's fdt node isn't present in kexec FDT > + * segment, which is not possible unless kexec FDT segment hasn't been > + * refreshed after DLPAR. > + */ > + if (first_node || offset < 0) > + return; > + > + /* Locate the device node of crashing cpu from of_root */ > + for_each_node_by_type(dn, "cpu") { > + if (!strcmp(dn->full_name, pathp)) > + break; > + } > + if (!dn) { > + pr_err("Could not locate device node of crashing cpu: %s\n", pathp); > + return; > + } > + > + /* Delete the crashing cpu FDT node from kexec FDT segment */ > + ret = fdt_del_node(fdt, offset); > + if (ret < 0) { > + pr_err("Error deleting node /cpus/%s: %s\n", pathp, fdt_strerror(ret)); > + return; > + } > + > + /* Add it as first subnode under /cpus node. */ > + offset = fdt_add_subnode(fdt, cpus_offset, dn->full_name); > + if (offset < 0) { > + pr_err("Unable to add %s subnode: %s\n", dn->full_name, > + fdt_strerror(offset)); > + return; > + } > + > + /* Copy rest of the properties of crashing cpus */ > + add_node_props(fdt, offset, dn); > + > + return; > +} > + > /* too late to fail here */ > void default_machine_kexec(struct kimage *image) > { > @@ -341,6 +455,20 @@ void default_machine_kexec(struct kimage *image) > printk("kexec: Unshared all shared pages.\n"); > } > > + /* > + * Move the crashing cpus FDT node as the first node under /cpus node. > + * This will make the core (where crashing cpu belongs) to > + * automatically become first core to show up in kdump kernel and > + * crashing cpu as boot cpu within first n threads of that core. > + * > + * Currently this will work with kexec_file_load only. > + * > + * XXX: For kexec_load, change is required in kexec tool to exclude FDT > + * segment from purgatory checksum check. > + */ > + if (image->type == KEXEC_TYPE_CRASH && image->file_mode) > + move_crashing_cpu(image); > + > paca_ptrs[kexec_paca.paca_index] = &kexec_paca; > > setup_paca(&kexec_paca); > diff --git a/arch/powerpc/kexec/file_load_64.c b/arch/powerpc/kexec/file_load_64.c > index 110d28bede2a7..42d55a19454a7 100644 > --- a/arch/powerpc/kexec/file_load_64.c > +++ b/arch/powerpc/kexec/file_load_64.c > @@ -1027,7 +1027,7 @@ unsigned int kexec_extra_fdt_size_ppc64(struct kimage *image) > * > * Returns 0 on success, negative errno on error. > */ > -static int add_node_props(void *fdt, int node_offset, const struct device_node *dn) > +int add_node_props(void *fdt, int node_offset, const struct device_node *dn) > { > int ret = 0; > struct property *pp; > >
Hi Mahesh, I am not quite sure about fdt, so I skip that part, and leave some comments from the kexec view. On Thu, Sep 7, 2023 at 1:59 AM Mahesh Salgaonkar <mahesh@linux.ibm.com> wrote: > > The kernel boot parameter 'nr_cpus=' allows one to specify number of > possible cpus in the system. In the normal scenario the first cpu (cpu0) > that shows up is the boot cpu and hence it gets covered under nr_cpus > limit. > > But this assumption is broken in kdump scenario where kdump kernel after a > crash can boot up on an non-zero boot cpu. The paca structure allocation > depends on value of nr_cpus and is indexed using logical cpu ids. The cpu > discovery code brings up the cpus as they appear sequentially on device > tree and assigns logical cpu ids starting from 0. This definitely becomes > an issue if boot cpu id > nr_cpus. When this occurs it results into > > In past there were proposals to fix this by making changes to cpu discovery > code to identify non-zero boot cpu and map it to logical cpu 0. However, > the changes were very invasive, making discovery code more complicated and > risky. > > Considering that the non-zero boot cpu scenario is more specific to kdump > kernel, limiting the changes in panic/crash kexec path would probably be a > best approach to have. > > Hence proposed change is, in crash kexec path, move the crashing cpu's > device node to the first position under '/cpus' node, which will make the > crashing cpu to be discovered as part of the first core in kdump kernel. > > In order to accommodate boot cpu for the case where boot_cpuid > nr_cpu_ids, > align up the nr_cpu_ids to SMT threads in early_init_dt_scan_cpus(). This > will allow kdump kernel to work with nr_cpus=X where X will be aligned up > in multiple of SMT threads per core. > > Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> > --- > arch/powerpc/include/asm/kexec.h | 1 > arch/powerpc/kernel/prom.c | 13 ++++ > arch/powerpc/kexec/core_64.c | 128 +++++++++++++++++++++++++++++++++++++ > arch/powerpc/kexec/file_load_64.c | 2 - > 4 files changed, 143 insertions(+), 1 deletion(-) > > diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h > index a1ddba01e7d13..f5a6f4a1b8eb0 100644 > --- a/arch/powerpc/include/asm/kexec.h > +++ b/arch/powerpc/include/asm/kexec.h > @@ -144,6 +144,7 @@ unsigned int kexec_extra_fdt_size_ppc64(struct kimage *image); > int setup_new_fdt_ppc64(const struct kimage *image, void *fdt, > unsigned long initrd_load_addr, > unsigned long initrd_len, const char *cmdline); > +int add_node_props(void *fdt, int node_offset, const struct device_node *dn); > #endif /* CONFIG_PPC64 */ > > #endif /* CONFIG_KEXEC_FILE */ > diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c > index 0b5878c3125b1..c2d4f55042d72 100644 > --- a/arch/powerpc/kernel/prom.c > +++ b/arch/powerpc/kernel/prom.c > @@ -322,6 +322,9 @@ static void __init check_cpu_feature_properties(unsigned long node) > } > } > > +/* align addr on a size boundary - adjust address up */ > +#define _ALIGN_UP(addr, size) (((addr)+((size)-1))&(~((typeof(addr))(size)-1))) > + > static int __init early_init_dt_scan_cpus(unsigned long node, > const char *uname, int depth, > void *data) > @@ -348,6 +351,16 @@ static int __init early_init_dt_scan_cpus(unsigned long node, > > nthreads = len / sizeof(int); > > + /* > + * Align nr_cpu_ids to correct SMT value. This will help us to allocate > + * pacas correctly to accomodate boot_cpu != 0 scenario e.g. in kdump > + * kernel the boot cpu can be any cpu between 0 through nthreads. > + */ > + if (nr_cpu_ids % nthreads) { > + nr_cpu_ids = _ALIGN_UP(nr_cpu_ids, nthreads); It is better to use set_nr_cpu_ids(), which can hide the difference of nr_cpus_ids under different kernel configuration. > + pr_info("Aligned nr_cpus to SMT=%d, nr_cpu_ids = %d\n", nthreads, nr_cpu_ids); > + } > + > /* > * Now see if any of these threads match our boot cpu. > * NOTE: This must match the parsing done in smp_setup_cpu_maps. > diff --git a/arch/powerpc/kexec/core_64.c b/arch/powerpc/kexec/core_64.c > index a79e28c91e2be..168bef43e22c2 100644 > --- a/arch/powerpc/kexec/core_64.c > +++ b/arch/powerpc/kexec/core_64.c > @@ -17,6 +17,7 @@ > #include <linux/cpu.h> > #include <linux/hardirq.h> > #include <linux/of.h> > +#include <linux/libfdt.h> > > #include <asm/page.h> > #include <asm/current.h> > @@ -298,6 +299,119 @@ extern void kexec_sequence(void *newstack, unsigned long start, > void (*clear_all)(void), > bool copy_with_mmu_off) __noreturn; > > +/* > + * Move the crashing cpus FDT node as the first node under '/cpus' node. > + * > + * - Get the FDT segment from the crash image segments. > + * - Locate the crashing CPUs fdt subnode 'A' under '/cpus' node. > + * - Now locate the crashing cpu device node 'B' from of_root device tree. > + * - Delete the crashing cpu FDT node 'A' from kexec FDT segment. > + * - Insert the crashing cpu device node 'B' into kexec FDT segment as first > + * subnode under '/cpus' node. > + */ > +static void move_crashing_cpu(struct kimage *image) > +{ > + void *fdt, *ptr; > + const char *pathp = NULL; > + unsigned long mem; > + const __be32 *intserv; > + struct device_node *dn; > + bool first_node = true; > + int cpus_offset, offset, fdt_index = -1; > + int initial_depth, depth, len, i, ret, nthreads; > + > + /* Find the FDT segment index in kexec segment array. */ > + for (i = 0; i < image->nr_segments; i++) { > + mem = image->segment[i].mem; > + ptr = __va(mem); > + if (ptr && fdt_magic(ptr) == FDT_MAGIC) { > + fdt_index = i; > + break; > + } > + } > + if (fdt_index < 0) { > + pr_err("Unable to locate FDT segment.\n"); > + return; > + } > + > + fdt = __va((void *)image->segment[fdt_index].mem); > + > + offset = cpus_offset = fdt_path_offset(fdt, "/cpus"); > + if (cpus_offset < 0) { > + if (cpus_offset != -FDT_ERR_NOTFOUND) > + pr_err("Malformed device tree: error reading /cpus node: %s\n", > + fdt_strerror(cpus_offset)); > + return; > + } > + > + /* Locate crashing cpus fdt node */ > + initial_depth = depth = 0; > + for (offset = fdt_next_node(fdt, offset, &depth); > + offset >= 0 && depth > initial_depth; > + offset = fdt_next_node(fdt, offset, &depth)) { > + > + > + intserv = fdt_getprop(fdt, offset, "ibm,ppc-interrupt-server#s", &len); > + if (!intserv) { > + pr_err("Unable to fetch ibm,ppc-interrupt-server#s property\n"); > + return; > + } > + > + /* Find the match for crashing cpus phys id. */ > + nthreads = len / sizeof(int); > + for (i = 0; i < nthreads; i++) { > + if (be32_to_cpu(intserv[i]) == get_paca()->hw_cpu_id) > + break; > + } > + if (i < nthreads) { > + /* Found the match */ > + pathp = fdt_get_name(fdt, offset, NULL); > + break; > + } > + > + first_node = false; > + } > + > + /* > + * Nothing to be done if crashing cpu's fdt node is already at first > + * position OR crashing cpu's fdt node isn't present in kexec FDT > + * segment, which is not possible unless kexec FDT segment hasn't been > + * refreshed after DLPAR. > + */ > + if (first_node || offset < 0) > + return; > + > + /* Locate the device node of crashing cpu from of_root */ > + for_each_node_by_type(dn, "cpu") { > + if (!strcmp(dn->full_name, pathp)) > + break; > + } > + if (!dn) { > + pr_err("Could not locate device node of crashing cpu: %s\n", pathp); > + return; > + } > + > + /* Delete the crashing cpu FDT node from kexec FDT segment */ > + ret = fdt_del_node(fdt, offset); > + if (ret < 0) { > + pr_err("Error deleting node /cpus/%s: %s\n", pathp, fdt_strerror(ret)); > + return; > + } > + > + /* Add it as first subnode under /cpus node. */ > + offset = fdt_add_subnode(fdt, cpus_offset, dn->full_name); > + if (offset < 0) { > + pr_err("Unable to add %s subnode: %s\n", dn->full_name, > + fdt_strerror(offset)); > + return; > + } > + > + /* Copy rest of the properties of crashing cpus */ > + add_node_props(fdt, offset, dn); > + > + return; > +} > + > /* too late to fail here */ > void default_machine_kexec(struct kimage *image) > { > @@ -341,6 +455,20 @@ void default_machine_kexec(struct kimage *image) > printk("kexec: Unshared all shared pages.\n"); > } > > + /* > + * Move the crashing cpus FDT node as the first node under /cpus node. > + * This will make the core (where crashing cpu belongs) to > + * automatically become first core to show up in kdump kernel and > + * crashing cpu as boot cpu within first n threads of that core. > + * > + * Currently this will work with kexec_file_load only. > + * > + * XXX: For kexec_load, change is required in kexec tool to exclude FDT > + * segment from purgatory checksum check. > + */ > + if (image->type == KEXEC_TYPE_CRASH && image->file_mode) > + move_crashing_cpu(image); > + Could "kexec -e" have the same logic? Then nr_cpus can work for both "kexec -p" and "kexec -e". Thanks, Pingfan > paca_ptrs[kexec_paca.paca_index] = &kexec_paca; > > setup_paca(&kexec_paca); > diff --git a/arch/powerpc/kexec/file_load_64.c b/arch/powerpc/kexec/file_load_64.c > index 110d28bede2a7..42d55a19454a7 100644 > --- a/arch/powerpc/kexec/file_load_64.c > +++ b/arch/powerpc/kexec/file_load_64.c > @@ -1027,7 +1027,7 @@ unsigned int kexec_extra_fdt_size_ppc64(struct kimage *image) > * > * Returns 0 on success, negative errno on error. > */ > -static int add_node_props(void *fdt, int node_offset, const struct device_node *dn) > +int add_node_props(void *fdt, int node_offset, const struct device_node *dn) > { > int ret = 0; > struct property *pp; > >
On 2023-09-11 21:23:42 Mon, Pingfan Liu wrote: > Hi Mahesh, > > I am not quite sure about fdt, so I skip that part, and leave some > comments from the kexec view. > > On Thu, Sep 7, 2023 at 1:59 AM Mahesh Salgaonkar <mahesh@linux.ibm.com> wrote: > > > > The kernel boot parameter 'nr_cpus=' allows one to specify number of > > possible cpus in the system. In the normal scenario the first cpu (cpu0) > > that shows up is the boot cpu and hence it gets covered under nr_cpus > > limit. > > > > But this assumption is broken in kdump scenario where kdump kernel after a > > crash can boot up on an non-zero boot cpu. The paca structure allocation > > depends on value of nr_cpus and is indexed using logical cpu ids. The cpu > > discovery code brings up the cpus as they appear sequentially on device > > tree and assigns logical cpu ids starting from 0. This definitely becomes > > an issue if boot cpu id > nr_cpus. When this occurs it results into > > > > In past there were proposals to fix this by making changes to cpu discovery > > code to identify non-zero boot cpu and map it to logical cpu 0. However, > > the changes were very invasive, making discovery code more complicated and > > risky. > > > > Considering that the non-zero boot cpu scenario is more specific to kdump > > kernel, limiting the changes in panic/crash kexec path would probably be a > > best approach to have. > > > > Hence proposed change is, in crash kexec path, move the crashing cpu's > > device node to the first position under '/cpus' node, which will make the > > crashing cpu to be discovered as part of the first core in kdump kernel. > > > > In order to accommodate boot cpu for the case where boot_cpuid > nr_cpu_ids, > > align up the nr_cpu_ids to SMT threads in early_init_dt_scan_cpus(). This > > will allow kdump kernel to work with nr_cpus=X where X will be aligned up > > in multiple of SMT threads per core. > > > > Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> > > --- > > arch/powerpc/include/asm/kexec.h | 1 > > arch/powerpc/kernel/prom.c | 13 ++++ > > arch/powerpc/kexec/core_64.c | 128 +++++++++++++++++++++++++++++++++++++ > > arch/powerpc/kexec/file_load_64.c | 2 - > > 4 files changed, 143 insertions(+), 1 deletion(-) > > > > diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h > > index a1ddba01e7d13..f5a6f4a1b8eb0 100644 > > --- a/arch/powerpc/include/asm/kexec.h > > +++ b/arch/powerpc/include/asm/kexec.h > > @@ -144,6 +144,7 @@ unsigned int kexec_extra_fdt_size_ppc64(struct kimage *image); > > int setup_new_fdt_ppc64(const struct kimage *image, void *fdt, > > unsigned long initrd_load_addr, > > unsigned long initrd_len, const char *cmdline); > > +int add_node_props(void *fdt, int node_offset, const struct device_node *dn); > > #endif /* CONFIG_PPC64 */ > > > > #endif /* CONFIG_KEXEC_FILE */ > > diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c > > index 0b5878c3125b1..c2d4f55042d72 100644 > > --- a/arch/powerpc/kernel/prom.c > > +++ b/arch/powerpc/kernel/prom.c > > @@ -322,6 +322,9 @@ static void __init check_cpu_feature_properties(unsigned long node) > > } > > } > > > > +/* align addr on a size boundary - adjust address up */ > > +#define _ALIGN_UP(addr, size) (((addr)+((size)-1))&(~((typeof(addr))(size)-1))) > > + > > static int __init early_init_dt_scan_cpus(unsigned long node, > > const char *uname, int depth, > > void *data) > > @@ -348,6 +351,16 @@ static int __init early_init_dt_scan_cpus(unsigned long node, > > > > nthreads = len / sizeof(int); > > > > + /* > > + * Align nr_cpu_ids to correct SMT value. This will help us to allocate > > + * pacas correctly to accomodate boot_cpu != 0 scenario e.g. in kdump > > + * kernel the boot cpu can be any cpu between 0 through nthreads. > > + */ > > + if (nr_cpu_ids % nthreads) { > > + nr_cpu_ids = _ALIGN_UP(nr_cpu_ids, nthreads); > > It is better to use set_nr_cpu_ids(), which can hide the difference of > nr_cpus_ids under different kernel configuration. Yup, I have fixed that in RFC v2 at https://lore.kernel.org/linuxppc-dev/169426331903.1523857.16489366285648613217.stgit@jupiter/ > > > + pr_info("Aligned nr_cpus to SMT=%d, nr_cpu_ids = %d\n", nthreads, nr_cpu_ids); > > + } > > + > > /* > > * Now see if any of these threads match our boot cpu. > > * NOTE: This must match the parsing done in smp_setup_cpu_maps. > > + [...] > > /* too late to fail here */ > > void default_machine_kexec(struct kimage *image) > > { > > @@ -341,6 +455,20 @@ void default_machine_kexec(struct kimage *image) > > printk("kexec: Unshared all shared pages.\n"); > > } > > > > + /* > > + * Move the crashing cpus FDT node as the first node under /cpus node. > > + * This will make the core (where crashing cpu belongs) to > > + * automatically become first core to show up in kdump kernel and > > + * crashing cpu as boot cpu within first n threads of that core. > > + * > > + * Currently this will work with kexec_file_load only. > > + * > > + * XXX: For kexec_load, change is required in kexec tool to exclude FDT > > + * segment from purgatory checksum check. > > + */ > > + if (image->type == KEXEC_TYPE_CRASH && image->file_mode) > > + move_crashing_cpu(image); > > + > > Could "kexec -e" have the same logic? Then nr_cpus can work for both > "kexec -p" and "kexec -e". I see that for normal kexec path we always migrate to reboot_cpus (which is by default is logical cpu 0) before kexec'ing into new kernel. Hence, the 3rd hunk of this patch which aligns up nr_cpu_ids to nthreads is enough to support nr_cpus. However, if someone chooses to change reboot_cpu other than 0, either through reboot_cpu= kernel parameter or by "echo cpunum > /sys/kernel/reboot/cpu", then kexec -e will need to move reboot_cpus fdt node to first position for nr_cpus to work. Simple way to confirm this is: $ kexec -l <vmlinux> --initrd=<initrd> --command-line="... nr_cpus=8" $ echo 8 > /sys/kernel/reboot/cpu $ kexec -e Kexec kernel fails to boot. Will work on changes to make kexec -e to work for nr_cpus in v3. Thanks for your review. -Mahesh. > > Thanks, > > Pingfan > > > paca_ptrs[kexec_paca.paca_index] = &kexec_paca; > > > > setup_paca(&kexec_paca); > > diff --git a/arch/powerpc/kexec/file_load_64.c b/arch/powerpc/kexec/file_load_64.c > > index 110d28bede2a7..42d55a19454a7 100644 > > --- a/arch/powerpc/kexec/file_load_64.c > > +++ b/arch/powerpc/kexec/file_load_64.c > > @@ -1027,7 +1027,7 @@ unsigned int kexec_extra_fdt_size_ppc64(struct kimage *image) > > * > > * Returns 0 on success, negative errno on error. > > */ > > -static int add_node_props(void *fdt, int node_offset, const struct device_node *dn) > > +int add_node_props(void *fdt, int node_offset, const struct device_node *dn) > > { > > int ret = 0; > > struct property *pp; > > > >
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h index a1ddba01e7d13..f5a6f4a1b8eb0 100644 --- a/arch/powerpc/include/asm/kexec.h +++ b/arch/powerpc/include/asm/kexec.h @@ -144,6 +144,7 @@ unsigned int kexec_extra_fdt_size_ppc64(struct kimage *image); int setup_new_fdt_ppc64(const struct kimage *image, void *fdt, unsigned long initrd_load_addr, unsigned long initrd_len, const char *cmdline); +int add_node_props(void *fdt, int node_offset, const struct device_node *dn); #endif /* CONFIG_PPC64 */ #endif /* CONFIG_KEXEC_FILE */ diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 0b5878c3125b1..c2d4f55042d72 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -322,6 +322,9 @@ static void __init check_cpu_feature_properties(unsigned long node) } } +/* align addr on a size boundary - adjust address up */ +#define _ALIGN_UP(addr, size) (((addr)+((size)-1))&(~((typeof(addr))(size)-1))) + static int __init early_init_dt_scan_cpus(unsigned long node, const char *uname, int depth, void *data) @@ -348,6 +351,16 @@ static int __init early_init_dt_scan_cpus(unsigned long node, nthreads = len / sizeof(int); + /* + * Align nr_cpu_ids to correct SMT value. This will help us to allocate + * pacas correctly to accomodate boot_cpu != 0 scenario e.g. in kdump + * kernel the boot cpu can be any cpu between 0 through nthreads. + */ + if (nr_cpu_ids % nthreads) { + nr_cpu_ids = _ALIGN_UP(nr_cpu_ids, nthreads); + pr_info("Aligned nr_cpus to SMT=%d, nr_cpu_ids = %d\n", nthreads, nr_cpu_ids); + } + /* * Now see if any of these threads match our boot cpu. * NOTE: This must match the parsing done in smp_setup_cpu_maps. diff --git a/arch/powerpc/kexec/core_64.c b/arch/powerpc/kexec/core_64.c index a79e28c91e2be..168bef43e22c2 100644 --- a/arch/powerpc/kexec/core_64.c +++ b/arch/powerpc/kexec/core_64.c @@ -17,6 +17,7 @@ #include <linux/cpu.h> #include <linux/hardirq.h> #include <linux/of.h> +#include <linux/libfdt.h> #include <asm/page.h> #include <asm/current.h> @@ -298,6 +299,119 @@ extern void kexec_sequence(void *newstack, unsigned long start, void (*clear_all)(void), bool copy_with_mmu_off) __noreturn; +/* + * Move the crashing cpus FDT node as the first node under '/cpus' node. + * + * - Get the FDT segment from the crash image segments. + * - Locate the crashing CPUs fdt subnode 'A' under '/cpus' node. + * - Now locate the crashing cpu device node 'B' from of_root device tree. + * - Delete the crashing cpu FDT node 'A' from kexec FDT segment. + * - Insert the crashing cpu device node 'B' into kexec FDT segment as first + * subnode under '/cpus' node. + */ +static void move_crashing_cpu(struct kimage *image) +{ + void *fdt, *ptr; + const char *pathp = NULL; + unsigned long mem; + const __be32 *intserv; + struct device_node *dn; + bool first_node = true; + int cpus_offset, offset, fdt_index = -1; + int initial_depth, depth, len, i, ret, nthreads; + + /* Find the FDT segment index in kexec segment array. */ + for (i = 0; i < image->nr_segments; i++) { + mem = image->segment[i].mem; + ptr = __va(mem); + if (ptr && fdt_magic(ptr) == FDT_MAGIC) { + fdt_index = i; + break; + } + } + if (fdt_index < 0) { + pr_err("Unable to locate FDT segment.\n"); + return; + } + + fdt = __va((void *)image->segment[fdt_index].mem); + + offset = cpus_offset = fdt_path_offset(fdt, "/cpus"); + if (cpus_offset < 0) { + if (cpus_offset != -FDT_ERR_NOTFOUND) + pr_err("Malformed device tree: error reading /cpus node: %s\n", + fdt_strerror(cpus_offset)); + return; + } + + /* Locate crashing cpus fdt node */ + initial_depth = depth = 0; + for (offset = fdt_next_node(fdt, offset, &depth); + offset >= 0 && depth > initial_depth; + offset = fdt_next_node(fdt, offset, &depth)) { + + + intserv = fdt_getprop(fdt, offset, "ibm,ppc-interrupt-server#s", &len); + if (!intserv) { + pr_err("Unable to fetch ibm,ppc-interrupt-server#s property\n"); + return; + } + + /* Find the match for crashing cpus phys id. */ + nthreads = len / sizeof(int); + for (i = 0; i < nthreads; i++) { + if (be32_to_cpu(intserv[i]) == get_paca()->hw_cpu_id) + break; + } + if (i < nthreads) { + /* Found the match */ + pathp = fdt_get_name(fdt, offset, NULL); + break; + } + + first_node = false; + } + + /* + * Nothing to be done if crashing cpu's fdt node is already at first + * position OR crashing cpu's fdt node isn't present in kexec FDT + * segment, which is not possible unless kexec FDT segment hasn't been + * refreshed after DLPAR. + */ + if (first_node || offset < 0) + return; + + /* Locate the device node of crashing cpu from of_root */ + for_each_node_by_type(dn, "cpu") { + if (!strcmp(dn->full_name, pathp)) + break; + } + if (!dn) { + pr_err("Could not locate device node of crashing cpu: %s\n", pathp); + return; + } + + /* Delete the crashing cpu FDT node from kexec FDT segment */ + ret = fdt_del_node(fdt, offset); + if (ret < 0) { + pr_err("Error deleting node /cpus/%s: %s\n", pathp, fdt_strerror(ret)); + return; + } + + /* Add it as first subnode under /cpus node. */ + offset = fdt_add_subnode(fdt, cpus_offset, dn->full_name); + if (offset < 0) { + pr_err("Unable to add %s subnode: %s\n", dn->full_name, + fdt_strerror(offset)); + return; + } + + /* Copy rest of the properties of crashing cpus */ + add_node_props(fdt, offset, dn); + + return; +} + /* too late to fail here */ void default_machine_kexec(struct kimage *image) { @@ -341,6 +455,20 @@ void default_machine_kexec(struct kimage *image) printk("kexec: Unshared all shared pages.\n"); } + /* + * Move the crashing cpus FDT node as the first node under /cpus node. + * This will make the core (where crashing cpu belongs) to + * automatically become first core to show up in kdump kernel and + * crashing cpu as boot cpu within first n threads of that core. + * + * Currently this will work with kexec_file_load only. + * + * XXX: For kexec_load, change is required in kexec tool to exclude FDT + * segment from purgatory checksum check. + */ + if (image->type == KEXEC_TYPE_CRASH && image->file_mode) + move_crashing_cpu(image); + paca_ptrs[kexec_paca.paca_index] = &kexec_paca; setup_paca(&kexec_paca); diff --git a/arch/powerpc/kexec/file_load_64.c b/arch/powerpc/kexec/file_load_64.c index 110d28bede2a7..42d55a19454a7 100644 --- a/arch/powerpc/kexec/file_load_64.c +++ b/arch/powerpc/kexec/file_load_64.c @@ -1027,7 +1027,7 @@ unsigned int kexec_extra_fdt_size_ppc64(struct kimage *image) * * Returns 0 on success, negative errno on error. */ -static int add_node_props(void *fdt, int node_offset, const struct device_node *dn) +int add_node_props(void *fdt, int node_offset, const struct device_node *dn) { int ret = 0; struct property *pp;
The kernel boot parameter 'nr_cpus=' allows one to specify number of possible cpus in the system. In the normal scenario the first cpu (cpu0) that shows up is the boot cpu and hence it gets covered under nr_cpus limit. But this assumption is broken in kdump scenario where kdump kernel after a crash can boot up on an non-zero boot cpu. The paca structure allocation depends on value of nr_cpus and is indexed using logical cpu ids. The cpu discovery code brings up the cpus as they appear sequentially on device tree and assigns logical cpu ids starting from 0. This definitely becomes an issue if boot cpu id > nr_cpus. When this occurs it results into In past there were proposals to fix this by making changes to cpu discovery code to identify non-zero boot cpu and map it to logical cpu 0. However, the changes were very invasive, making discovery code more complicated and risky. Considering that the non-zero boot cpu scenario is more specific to kdump kernel, limiting the changes in panic/crash kexec path would probably be a best approach to have. Hence proposed change is, in crash kexec path, move the crashing cpu's device node to the first position under '/cpus' node, which will make the crashing cpu to be discovered as part of the first core in kdump kernel. In order to accommodate boot cpu for the case where boot_cpuid > nr_cpu_ids, align up the nr_cpu_ids to SMT threads in early_init_dt_scan_cpus(). This will allow kdump kernel to work with nr_cpus=X where X will be aligned up in multiple of SMT threads per core. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> --- arch/powerpc/include/asm/kexec.h | 1 arch/powerpc/kernel/prom.c | 13 ++++ arch/powerpc/kexec/core_64.c | 128 +++++++++++++++++++++++++++++++++++++ arch/powerpc/kexec/file_load_64.c | 2 - 4 files changed, 143 insertions(+), 1 deletion(-)