Message ID | 20230801103527.397756-11-zhao1.liu@linux.intel.com |
---|---|
State | New |
Headers | show |
Series | Support smp.clusters for x86 | expand |
Hi Zhao, On 8/1/23 05:35, Zhao Liu wrote: > From: Zhuocheng Ding <zhuocheng.ding@intel.com> > > We introduce cluster-id other than module-id to be consistent with s/We introduce/Introduce/ Thanks Babu > CpuInstanceProperties.cluster-id, and this avoids the confusion > of parameter names when hotplugging. > > Following the legacy smp check rules, also add the cluster_id validity > into x86_cpu_pre_plug(). > > Signed-off-by: Zhuocheng Ding <zhuocheng.ding@intel.com> > Co-developed-by: Zhao Liu <zhao1.liu@intel.com> > Signed-off-by: Zhao Liu <zhao1.liu@intel.com> > Acked-by: Michael S. Tsirkin <mst@redhat.com> > --- > hw/i386/x86.c | 33 +++++++++++++++++++++++++-------- > target/i386/cpu.c | 2 ++ > target/i386/cpu.h | 1 + > 3 files changed, 28 insertions(+), 8 deletions(-) > > diff --git a/hw/i386/x86.c b/hw/i386/x86.c > index 0b460fd6074d..8154b86f95c7 100644 > --- a/hw/i386/x86.c > +++ b/hw/i386/x86.c > @@ -328,6 +328,14 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, > cpu->die_id = 0; > } > > + /* > + * cluster-id was optional in QEMU 8.0 and older, so keep it optional > + * if there's only one cluster per die. > + */ > + if (cpu->cluster_id < 0 && ms->smp.clusters == 1) { > + cpu->cluster_id = 0; > + } > + > if (cpu->socket_id < 0) { > error_setg(errp, "CPU socket-id is not set"); > return; > @@ -344,6 +352,14 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, > cpu->die_id, ms->smp.dies - 1); > return; > } > + if (cpu->cluster_id < 0) { > + error_setg(errp, "CPU cluster-id is not set"); > + return; > + } else if (cpu->cluster_id > ms->smp.clusters - 1) { > + error_setg(errp, "Invalid CPU cluster-id: %u must be in range 0:%u", > + cpu->cluster_id, ms->smp.clusters - 1); > + return; > + } > if (cpu->core_id < 0) { > error_setg(errp, "CPU core-id is not set"); > return; > @@ -363,16 +379,9 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, > > topo_ids.pkg_id = cpu->socket_id; > topo_ids.die_id = cpu->die_id; > + topo_ids.module_id = cpu->cluster_id; > topo_ids.core_id = cpu->core_id; > topo_ids.smt_id = cpu->thread_id; > - > - /* > - * TODO: This is the temporary initialization for topo_ids.module_id to > - * avoid "maybe-uninitialized" compilation errors. Will remove when > - * X86CPU supports cluster_id. > - */ > - topo_ids.module_id = 0; > - > cpu->apic_id = x86_apicid_from_topo_ids(&topo_info, &topo_ids); > } > > @@ -419,6 +428,14 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, > } > cpu->die_id = topo_ids.die_id; > > + if (cpu->cluster_id != -1 && cpu->cluster_id != topo_ids.module_id) { > + error_setg(errp, "property cluster-id: %u doesn't match set apic-id:" > + " 0x%x (cluster-id: %u)", cpu->cluster_id, cpu->apic_id, > + topo_ids.module_id); > + return; > + } > + cpu->cluster_id = topo_ids.module_id; > + > if (cpu->core_id != -1 && cpu->core_id != topo_ids.core_id) { > error_setg(errp, "property core-id: %u doesn't match set apic-id:" > " 0x%x (core-id: %u)", cpu->core_id, cpu->apic_id, > diff --git a/target/i386/cpu.c b/target/i386/cpu.c > index d6969813ee02..ffa282219078 100644 > --- a/target/i386/cpu.c > +++ b/target/i386/cpu.c > @@ -7806,12 +7806,14 @@ static Property x86_cpu_properties[] = { > DEFINE_PROP_UINT32("apic-id", X86CPU, apic_id, 0), > DEFINE_PROP_INT32("thread-id", X86CPU, thread_id, 0), > DEFINE_PROP_INT32("core-id", X86CPU, core_id, 0), > + DEFINE_PROP_INT32("cluster-id", X86CPU, cluster_id, 0), > DEFINE_PROP_INT32("die-id", X86CPU, die_id, 0), > DEFINE_PROP_INT32("socket-id", X86CPU, socket_id, 0), > #else > DEFINE_PROP_UINT32("apic-id", X86CPU, apic_id, UNASSIGNED_APIC_ID), > DEFINE_PROP_INT32("thread-id", X86CPU, thread_id, -1), > DEFINE_PROP_INT32("core-id", X86CPU, core_id, -1), > + DEFINE_PROP_INT32("cluster-id", X86CPU, cluster_id, -1), > DEFINE_PROP_INT32("die-id", X86CPU, die_id, -1), > DEFINE_PROP_INT32("socket-id", X86CPU, socket_id, -1), > #endif > diff --git a/target/i386/cpu.h b/target/i386/cpu.h > index 5e97d0b76574..d9577938ae04 100644 > --- a/target/i386/cpu.h > +++ b/target/i386/cpu.h > @@ -2034,6 +2034,7 @@ struct ArchCPU { > int32_t node_id; /* NUMA node this CPU belongs to */ > int32_t socket_id; > int32_t die_id; > + int32_t cluster_id; > int32_t core_id; > int32_t thread_id; >
Hi Babu, On Wed, Aug 02, 2023 at 05:44:38PM -0500, Moger, Babu wrote: > Date: Wed, 2 Aug 2023 17:44:38 -0500 > From: "Moger, Babu" <babu.moger@amd.com> > Subject: Re: [PATCH v3 10/17] i386/cpu: Introduce cluster-id to X86CPU > > Hi Zhao, > > On 8/1/23 05:35, Zhao Liu wrote: > > From: Zhuocheng Ding <zhuocheng.ding@intel.com> > > > > We introduce cluster-id other than module-id to be consistent with > > s/We introduce/Introduce/ Thanks! Will fix. -Zhao > > Thanks > Babu > > > CpuInstanceProperties.cluster-id, and this avoids the confusion > > of parameter names when hotplugging. > > > > Following the legacy smp check rules, also add the cluster_id validity > > into x86_cpu_pre_plug(). > > > > Signed-off-by: Zhuocheng Ding <zhuocheng.ding@intel.com> > > Co-developed-by: Zhao Liu <zhao1.liu@intel.com> > > Signed-off-by: Zhao Liu <zhao1.liu@intel.com> > > Acked-by: Michael S. Tsirkin <mst@redhat.com> > > --- > > hw/i386/x86.c | 33 +++++++++++++++++++++++++-------- > > target/i386/cpu.c | 2 ++ > > target/i386/cpu.h | 1 + > > 3 files changed, 28 insertions(+), 8 deletions(-) > > > > diff --git a/hw/i386/x86.c b/hw/i386/x86.c > > index 0b460fd6074d..8154b86f95c7 100644 > > --- a/hw/i386/x86.c > > +++ b/hw/i386/x86.c > > @@ -328,6 +328,14 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, > > cpu->die_id = 0; > > } > > > > + /* > > + * cluster-id was optional in QEMU 8.0 and older, so keep it optional > > + * if there's only one cluster per die. > > + */ > > + if (cpu->cluster_id < 0 && ms->smp.clusters == 1) { > > + cpu->cluster_id = 0; > > + } > > + > > if (cpu->socket_id < 0) { > > error_setg(errp, "CPU socket-id is not set"); > > return; > > @@ -344,6 +352,14 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, > > cpu->die_id, ms->smp.dies - 1); > > return; > > } > > + if (cpu->cluster_id < 0) { > > + error_setg(errp, "CPU cluster-id is not set"); > > + return; > > + } else if (cpu->cluster_id > ms->smp.clusters - 1) { > > + error_setg(errp, "Invalid CPU cluster-id: %u must be in range 0:%u", > > + cpu->cluster_id, ms->smp.clusters - 1); > > + return; > > + } > > if (cpu->core_id < 0) { > > error_setg(errp, "CPU core-id is not set"); > > return; > > @@ -363,16 +379,9 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, > > > > topo_ids.pkg_id = cpu->socket_id; > > topo_ids.die_id = cpu->die_id; > > + topo_ids.module_id = cpu->cluster_id; > > topo_ids.core_id = cpu->core_id; > > topo_ids.smt_id = cpu->thread_id; > > - > > - /* > > - * TODO: This is the temporary initialization for topo_ids.module_id to > > - * avoid "maybe-uninitialized" compilation errors. Will remove when > > - * X86CPU supports cluster_id. > > - */ > > - topo_ids.module_id = 0; > > - > > cpu->apic_id = x86_apicid_from_topo_ids(&topo_info, &topo_ids); > > } > > > > @@ -419,6 +428,14 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, > > } > > cpu->die_id = topo_ids.die_id; > > > > + if (cpu->cluster_id != -1 && cpu->cluster_id != topo_ids.module_id) { > > + error_setg(errp, "property cluster-id: %u doesn't match set apic-id:" > > + " 0x%x (cluster-id: %u)", cpu->cluster_id, cpu->apic_id, > > + topo_ids.module_id); > > + return; > > + } > > + cpu->cluster_id = topo_ids.module_id; > > + > > if (cpu->core_id != -1 && cpu->core_id != topo_ids.core_id) { > > error_setg(errp, "property core-id: %u doesn't match set apic-id:" > > " 0x%x (core-id: %u)", cpu->core_id, cpu->apic_id, > > diff --git a/target/i386/cpu.c b/target/i386/cpu.c > > index d6969813ee02..ffa282219078 100644 > > --- a/target/i386/cpu.c > > +++ b/target/i386/cpu.c > > @@ -7806,12 +7806,14 @@ static Property x86_cpu_properties[] = { > > DEFINE_PROP_UINT32("apic-id", X86CPU, apic_id, 0), > > DEFINE_PROP_INT32("thread-id", X86CPU, thread_id, 0), > > DEFINE_PROP_INT32("core-id", X86CPU, core_id, 0), > > + DEFINE_PROP_INT32("cluster-id", X86CPU, cluster_id, 0), > > DEFINE_PROP_INT32("die-id", X86CPU, die_id, 0), > > DEFINE_PROP_INT32("socket-id", X86CPU, socket_id, 0), > > #else > > DEFINE_PROP_UINT32("apic-id", X86CPU, apic_id, UNASSIGNED_APIC_ID), > > DEFINE_PROP_INT32("thread-id", X86CPU, thread_id, -1), > > DEFINE_PROP_INT32("core-id", X86CPU, core_id, -1), > > + DEFINE_PROP_INT32("cluster-id", X86CPU, cluster_id, -1), > > DEFINE_PROP_INT32("die-id", X86CPU, die_id, -1), > > DEFINE_PROP_INT32("socket-id", X86CPU, socket_id, -1), > > #endif > > diff --git a/target/i386/cpu.h b/target/i386/cpu.h > > index 5e97d0b76574..d9577938ae04 100644 > > --- a/target/i386/cpu.h > > +++ b/target/i386/cpu.h > > @@ -2034,6 +2034,7 @@ struct ArchCPU { > > int32_t node_id; /* NUMA node this CPU belongs to */ > > int32_t socket_id; > > int32_t die_id; > > + int32_t cluster_id; > > int32_t core_id; > > int32_t thread_id; > > > > -- > Thanks > Babu Moger
diff --git a/hw/i386/x86.c b/hw/i386/x86.c index 0b460fd6074d..8154b86f95c7 100644 --- a/hw/i386/x86.c +++ b/hw/i386/x86.c @@ -328,6 +328,14 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, cpu->die_id = 0; } + /* + * cluster-id was optional in QEMU 8.0 and older, so keep it optional + * if there's only one cluster per die. + */ + if (cpu->cluster_id < 0 && ms->smp.clusters == 1) { + cpu->cluster_id = 0; + } + if (cpu->socket_id < 0) { error_setg(errp, "CPU socket-id is not set"); return; @@ -344,6 +352,14 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, cpu->die_id, ms->smp.dies - 1); return; } + if (cpu->cluster_id < 0) { + error_setg(errp, "CPU cluster-id is not set"); + return; + } else if (cpu->cluster_id > ms->smp.clusters - 1) { + error_setg(errp, "Invalid CPU cluster-id: %u must be in range 0:%u", + cpu->cluster_id, ms->smp.clusters - 1); + return; + } if (cpu->core_id < 0) { error_setg(errp, "CPU core-id is not set"); return; @@ -363,16 +379,9 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, topo_ids.pkg_id = cpu->socket_id; topo_ids.die_id = cpu->die_id; + topo_ids.module_id = cpu->cluster_id; topo_ids.core_id = cpu->core_id; topo_ids.smt_id = cpu->thread_id; - - /* - * TODO: This is the temporary initialization for topo_ids.module_id to - * avoid "maybe-uninitialized" compilation errors. Will remove when - * X86CPU supports cluster_id. - */ - topo_ids.module_id = 0; - cpu->apic_id = x86_apicid_from_topo_ids(&topo_info, &topo_ids); } @@ -419,6 +428,14 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, } cpu->die_id = topo_ids.die_id; + if (cpu->cluster_id != -1 && cpu->cluster_id != topo_ids.module_id) { + error_setg(errp, "property cluster-id: %u doesn't match set apic-id:" + " 0x%x (cluster-id: %u)", cpu->cluster_id, cpu->apic_id, + topo_ids.module_id); + return; + } + cpu->cluster_id = topo_ids.module_id; + if (cpu->core_id != -1 && cpu->core_id != topo_ids.core_id) { error_setg(errp, "property core-id: %u doesn't match set apic-id:" " 0x%x (core-id: %u)", cpu->core_id, cpu->apic_id, diff --git a/target/i386/cpu.c b/target/i386/cpu.c index d6969813ee02..ffa282219078 100644 --- a/target/i386/cpu.c +++ b/target/i386/cpu.c @@ -7806,12 +7806,14 @@ static Property x86_cpu_properties[] = { DEFINE_PROP_UINT32("apic-id", X86CPU, apic_id, 0), DEFINE_PROP_INT32("thread-id", X86CPU, thread_id, 0), DEFINE_PROP_INT32("core-id", X86CPU, core_id, 0), + DEFINE_PROP_INT32("cluster-id", X86CPU, cluster_id, 0), DEFINE_PROP_INT32("die-id", X86CPU, die_id, 0), DEFINE_PROP_INT32("socket-id", X86CPU, socket_id, 0), #else DEFINE_PROP_UINT32("apic-id", X86CPU, apic_id, UNASSIGNED_APIC_ID), DEFINE_PROP_INT32("thread-id", X86CPU, thread_id, -1), DEFINE_PROP_INT32("core-id", X86CPU, core_id, -1), + DEFINE_PROP_INT32("cluster-id", X86CPU, cluster_id, -1), DEFINE_PROP_INT32("die-id", X86CPU, die_id, -1), DEFINE_PROP_INT32("socket-id", X86CPU, socket_id, -1), #endif diff --git a/target/i386/cpu.h b/target/i386/cpu.h index 5e97d0b76574..d9577938ae04 100644 --- a/target/i386/cpu.h +++ b/target/i386/cpu.h @@ -2034,6 +2034,7 @@ struct ArchCPU { int32_t node_id; /* NUMA node this CPU belongs to */ int32_t socket_id; int32_t die_id; + int32_t cluster_id; int32_t core_id; int32_t thread_id;