Message ID | 20230412073510.7158-1-jasowang@redhat.com |
---|---|
State | New |
Headers | show |
Series | [V2] intel_iommu: refine iotlb hash calculation | expand |
Jason Wang <jasowang@redhat.com> writes: > Commit 1b2b12376c8 ("intel-iommu: PASID support") takes PASID into > account when calculating iotlb hash like: > > static guint vtd_iotlb_hash(gconstpointer v) > { > const struct vtd_iotlb_key *key = v; > > return key->gfn | ((key->sid) << VTD_IOTLB_SID_SHIFT) | > (key->level) << VTD_IOTLB_LVL_SHIFT | > (key->pasid) << VTD_IOTLB_PASID_SHIFT; > } > > This turns out to be problematic since: > > - the shift will lose bits if not converting to uint64_t > - level should be off by one in order to fit into 2 bits > - VTD_IOTLB_PASID_SHIFT is 30 but PASID is 20 bits which will waste > some bits > - the hash result is uint64_t so we will lose bits when converting to > guint > > So this patch fixes them by > > - converting the keys into uint64_t before doing the shift > - off level by one to make it fit into two bits > - change the sid, lvl and pasid shift to 26, 42 and 44 in order to > take the full width of uint64_t > - perform an XOR to the top 32bit with the bottom 32bit for the final > result to fit guint > > Fixes: Coverity CID 1508100 > Fixes: 1b2b12376c8 ("intel-iommu: PASID support") > Signed-off-by: Jason Wang <jasowang@redhat.com> > --- > Changes since V1: > - perform XOR to avoid losing bits when converting to gint > --- > hw/i386/intel_iommu.c | 9 +++++---- > hw/i386/intel_iommu_internal.h | 6 +++--- > 2 files changed, 8 insertions(+), 7 deletions(-) > > diff --git a/hw/i386/intel_iommu.c b/hw/i386/intel_iommu.c > index a62896759c..94d52f4205 100644 > --- a/hw/i386/intel_iommu.c > +++ b/hw/i386/intel_iommu.c > @@ -64,8 +64,8 @@ struct vtd_as_key { > struct vtd_iotlb_key { > uint64_t gfn; > uint32_t pasid; > - uint32_t level; > uint16_t sid; > + uint8_t level; > }; > > static void vtd_address_space_refresh_all(IntelIOMMUState *s); > @@ -221,10 +221,11 @@ static gboolean vtd_iotlb_equal(gconstpointer v1, gconstpointer v2) > static guint vtd_iotlb_hash(gconstpointer v) > { > const struct vtd_iotlb_key *key = v; > + uint64_t hash64 = key->gfn | ((uint64_t)(key->sid) << VTD_IOTLB_SID_SHIFT) | > + (uint64_t)(key->level - 1) << VTD_IOTLB_LVL_SHIFT | > + (uint64_t)(key->pasid) << VTD_IOTLB_PASID_SHIFT; > > - return key->gfn | ((key->sid) << VTD_IOTLB_SID_SHIFT) | > - (key->level) << VTD_IOTLB_LVL_SHIFT | > - (key->pasid) << VTD_IOTLB_PASID_SHIFT; > + return (guint)((hash64 >> 32) ^ (hash64 & 0xffffffffU)); Have you measured the distribution this hash gives you? Otherwise consider using the qemu_xxhash() functions to return a well distributed 32 bit hash value.
On Wed, Apr 12, 2023 at 4:43 PM Alex Bennée <alex.bennee@linaro.org> wrote: > > > Jason Wang <jasowang@redhat.com> writes: > > > Commit 1b2b12376c8 ("intel-iommu: PASID support") takes PASID into > > account when calculating iotlb hash like: > > > > static guint vtd_iotlb_hash(gconstpointer v) > > { > > const struct vtd_iotlb_key *key = v; > > > > return key->gfn | ((key->sid) << VTD_IOTLB_SID_SHIFT) | > > (key->level) << VTD_IOTLB_LVL_SHIFT | > > (key->pasid) << VTD_IOTLB_PASID_SHIFT; > > } > > > > This turns out to be problematic since: > > > > - the shift will lose bits if not converting to uint64_t > > - level should be off by one in order to fit into 2 bits > > - VTD_IOTLB_PASID_SHIFT is 30 but PASID is 20 bits which will waste > > some bits > > - the hash result is uint64_t so we will lose bits when converting to > > guint > > > > So this patch fixes them by > > > > - converting the keys into uint64_t before doing the shift > > - off level by one to make it fit into two bits > > - change the sid, lvl and pasid shift to 26, 42 and 44 in order to > > take the full width of uint64_t > > - perform an XOR to the top 32bit with the bottom 32bit for the final > > result to fit guint > > > > Fixes: Coverity CID 1508100 > > Fixes: 1b2b12376c8 ("intel-iommu: PASID support") > > Signed-off-by: Jason Wang <jasowang@redhat.com> > > --- > > Changes since V1: > > - perform XOR to avoid losing bits when converting to gint > > --- > > hw/i386/intel_iommu.c | 9 +++++---- > > hw/i386/intel_iommu_internal.h | 6 +++--- > > 2 files changed, 8 insertions(+), 7 deletions(-) > > > > diff --git a/hw/i386/intel_iommu.c b/hw/i386/intel_iommu.c > > index a62896759c..94d52f4205 100644 > > --- a/hw/i386/intel_iommu.c > > +++ b/hw/i386/intel_iommu.c > > @@ -64,8 +64,8 @@ struct vtd_as_key { > > struct vtd_iotlb_key { > > uint64_t gfn; > > uint32_t pasid; > > - uint32_t level; > > uint16_t sid; > > + uint8_t level; > > }; > > > > static void vtd_address_space_refresh_all(IntelIOMMUState *s); > > @@ -221,10 +221,11 @@ static gboolean vtd_iotlb_equal(gconstpointer v1, gconstpointer v2) > > static guint vtd_iotlb_hash(gconstpointer v) > > { > > const struct vtd_iotlb_key *key = v; > > + uint64_t hash64 = key->gfn | ((uint64_t)(key->sid) << VTD_IOTLB_SID_SHIFT) | > > + (uint64_t)(key->level - 1) << VTD_IOTLB_LVL_SHIFT | > > + (uint64_t)(key->pasid) << VTD_IOTLB_PASID_SHIFT; > > > > - return key->gfn | ((key->sid) << VTD_IOTLB_SID_SHIFT) | > > - (key->level) << VTD_IOTLB_LVL_SHIFT | > > - (key->pasid) << VTD_IOTLB_PASID_SHIFT; > > + return (guint)((hash64 >> 32) ^ (hash64 & 0xffffffffU)); > > Have you measured the distribution this hash gives you? Otherwise > consider using the qemu_xxhash() functions to return a well distributed > 32 bit hash value. It depends on a lot of factors and so it won't be even because the individuals keys are not evenly distributed: - gfn depends on guest DMA subsystems - level depends on when huge pages are used - pasid depends on whether PASID is being used I'm ok to switch to use qemu_xxhash() if everyone agree. Or if as Peter said, if it has been dealt with glibc, maybe it's not worth to bother. Thanks > > -- > Alex Bennée > Virtualisation Tech Lead @ Linaro >
Jason Wang <jasowang@redhat.com> writes: > On Wed, Apr 12, 2023 at 4:43 PM Alex Bennée <alex.bennee@linaro.org> wrote: >> >> >> Jason Wang <jasowang@redhat.com> writes: >> >> > Commit 1b2b12376c8 ("intel-iommu: PASID support") takes PASID into >> > account when calculating iotlb hash like: >> > >> > static guint vtd_iotlb_hash(gconstpointer v) >> > { >> > const struct vtd_iotlb_key *key = v; >> > >> > return key->gfn | ((key->sid) << VTD_IOTLB_SID_SHIFT) | >> > (key->level) << VTD_IOTLB_LVL_SHIFT | >> > (key->pasid) << VTD_IOTLB_PASID_SHIFT; >> > } >> > >> > This turns out to be problematic since: >> > >> > - the shift will lose bits if not converting to uint64_t >> > - level should be off by one in order to fit into 2 bits >> > - VTD_IOTLB_PASID_SHIFT is 30 but PASID is 20 bits which will waste >> > some bits >> > - the hash result is uint64_t so we will lose bits when converting to >> > guint >> > >> > So this patch fixes them by >> > >> > - converting the keys into uint64_t before doing the shift >> > - off level by one to make it fit into two bits >> > - change the sid, lvl and pasid shift to 26, 42 and 44 in order to >> > take the full width of uint64_t >> > - perform an XOR to the top 32bit with the bottom 32bit for the final >> > result to fit guint >> > >> > Fixes: Coverity CID 1508100 >> > Fixes: 1b2b12376c8 ("intel-iommu: PASID support") >> > Signed-off-by: Jason Wang <jasowang@redhat.com> >> > --- >> > Changes since V1: >> > - perform XOR to avoid losing bits when converting to gint >> > --- >> > hw/i386/intel_iommu.c | 9 +++++---- >> > hw/i386/intel_iommu_internal.h | 6 +++--- >> > 2 files changed, 8 insertions(+), 7 deletions(-) >> > >> > diff --git a/hw/i386/intel_iommu.c b/hw/i386/intel_iommu.c >> > index a62896759c..94d52f4205 100644 >> > --- a/hw/i386/intel_iommu.c >> > +++ b/hw/i386/intel_iommu.c >> > @@ -64,8 +64,8 @@ struct vtd_as_key { >> > struct vtd_iotlb_key { >> > uint64_t gfn; >> > uint32_t pasid; >> > - uint32_t level; >> > uint16_t sid; >> > + uint8_t level; >> > }; >> > >> > static void vtd_address_space_refresh_all(IntelIOMMUState *s); >> > @@ -221,10 +221,11 @@ static gboolean vtd_iotlb_equal(gconstpointer v1, gconstpointer v2) >> > static guint vtd_iotlb_hash(gconstpointer v) >> > { >> > const struct vtd_iotlb_key *key = v; >> > + uint64_t hash64 = key->gfn | ((uint64_t)(key->sid) << VTD_IOTLB_SID_SHIFT) | >> > + (uint64_t)(key->level - 1) << VTD_IOTLB_LVL_SHIFT | >> > + (uint64_t)(key->pasid) << VTD_IOTLB_PASID_SHIFT; >> > >> > - return key->gfn | ((key->sid) << VTD_IOTLB_SID_SHIFT) | >> > - (key->level) << VTD_IOTLB_LVL_SHIFT | >> > - (key->pasid) << VTD_IOTLB_PASID_SHIFT; >> > + return (guint)((hash64 >> 32) ^ (hash64 & 0xffffffffU)); >> >> Have you measured the distribution this hash gives you? Otherwise >> consider using the qemu_xxhash() functions to return a well distributed >> 32 bit hash value. > > It depends on a lot of factors and so it won't be even because the > individuals keys are not evenly distributed: > > - gfn depends on guest DMA subsystems > - level depends on when huge pages are used > - pasid depends on whether PASID is being used > > I'm ok to switch to use qemu_xxhash() if everyone agree. Or if as > Peter said, if it has been dealt with glibc, maybe it's not worth to > bother. Yeah I missed that glibs default hash functions where pretty basic. I think you can ignore my suggestion. > > Thanks > >> >> -- >> Alex Bennée >> Virtualisation Tech Lead @ Linaro >>
On Wed, Apr 12, 2023 at 03:35:10PM +0800, Jason Wang wrote: > Commit 1b2b12376c8 ("intel-iommu: PASID support") takes PASID into > account when calculating iotlb hash like: > > static guint vtd_iotlb_hash(gconstpointer v) > { > const struct vtd_iotlb_key *key = v; > > return key->gfn | ((key->sid) << VTD_IOTLB_SID_SHIFT) | > (key->level) << VTD_IOTLB_LVL_SHIFT | > (key->pasid) << VTD_IOTLB_PASID_SHIFT; > } > > This turns out to be problematic since: > > - the shift will lose bits if not converting to uint64_t > - level should be off by one in order to fit into 2 bits > - VTD_IOTLB_PASID_SHIFT is 30 but PASID is 20 bits which will waste > some bits > - the hash result is uint64_t so we will lose bits when converting to > guint > > So this patch fixes them by > > - converting the keys into uint64_t before doing the shift > - off level by one to make it fit into two bits > - change the sid, lvl and pasid shift to 26, 42 and 44 in order to > take the full width of uint64_t > - perform an XOR to the top 32bit with the bottom 32bit for the final > result to fit guint > > Fixes: Coverity CID 1508100 > Fixes: 1b2b12376c8 ("intel-iommu: PASID support") > Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
diff --git a/hw/i386/intel_iommu.c b/hw/i386/intel_iommu.c index a62896759c..94d52f4205 100644 --- a/hw/i386/intel_iommu.c +++ b/hw/i386/intel_iommu.c @@ -64,8 +64,8 @@ struct vtd_as_key { struct vtd_iotlb_key { uint64_t gfn; uint32_t pasid; - uint32_t level; uint16_t sid; + uint8_t level; }; static void vtd_address_space_refresh_all(IntelIOMMUState *s); @@ -221,10 +221,11 @@ static gboolean vtd_iotlb_equal(gconstpointer v1, gconstpointer v2) static guint vtd_iotlb_hash(gconstpointer v) { const struct vtd_iotlb_key *key = v; + uint64_t hash64 = key->gfn | ((uint64_t)(key->sid) << VTD_IOTLB_SID_SHIFT) | + (uint64_t)(key->level - 1) << VTD_IOTLB_LVL_SHIFT | + (uint64_t)(key->pasid) << VTD_IOTLB_PASID_SHIFT; - return key->gfn | ((key->sid) << VTD_IOTLB_SID_SHIFT) | - (key->level) << VTD_IOTLB_LVL_SHIFT | - (key->pasid) << VTD_IOTLB_PASID_SHIFT; + return (guint)((hash64 >> 32) ^ (hash64 & 0xffffffffU)); } static gboolean vtd_as_equal(gconstpointer v1, gconstpointer v2) diff --git a/hw/i386/intel_iommu_internal.h b/hw/i386/intel_iommu_internal.h index f090e61e11..2e61eec2f5 100644 --- a/hw/i386/intel_iommu_internal.h +++ b/hw/i386/intel_iommu_internal.h @@ -114,9 +114,9 @@ VTD_INTERRUPT_ADDR_FIRST + 1) /* The shift of source_id in the key of IOTLB hash table */ -#define VTD_IOTLB_SID_SHIFT 20 -#define VTD_IOTLB_LVL_SHIFT 28 -#define VTD_IOTLB_PASID_SHIFT 30 +#define VTD_IOTLB_SID_SHIFT 26 +#define VTD_IOTLB_LVL_SHIFT 42 +#define VTD_IOTLB_PASID_SHIFT 44 #define VTD_IOTLB_MAX_SIZE 1024 /* Max size of the hash table */ /* IOTLB_REG */
Commit 1b2b12376c8 ("intel-iommu: PASID support") takes PASID into account when calculating iotlb hash like: static guint vtd_iotlb_hash(gconstpointer v) { const struct vtd_iotlb_key *key = v; return key->gfn | ((key->sid) << VTD_IOTLB_SID_SHIFT) | (key->level) << VTD_IOTLB_LVL_SHIFT | (key->pasid) << VTD_IOTLB_PASID_SHIFT; } This turns out to be problematic since: - the shift will lose bits if not converting to uint64_t - level should be off by one in order to fit into 2 bits - VTD_IOTLB_PASID_SHIFT is 30 but PASID is 20 bits which will waste some bits - the hash result is uint64_t so we will lose bits when converting to guint So this patch fixes them by - converting the keys into uint64_t before doing the shift - off level by one to make it fit into two bits - change the sid, lvl and pasid shift to 26, 42 and 44 in order to take the full width of uint64_t - perform an XOR to the top 32bit with the bottom 32bit for the final result to fit guint Fixes: Coverity CID 1508100 Fixes: 1b2b12376c8 ("intel-iommu: PASID support") Signed-off-by: Jason Wang <jasowang@redhat.com> --- Changes since V1: - perform XOR to avoid losing bits when converting to gint --- hw/i386/intel_iommu.c | 9 +++++---- hw/i386/intel_iommu_internal.h | 6 +++--- 2 files changed, 8 insertions(+), 7 deletions(-)