mbox series

[V3,0/9] Add minimal boot support for IPQ5332

Message ID 20230206071217.29313-1-quic_kathirav@quicinc.com
Headers show
Series Add minimal boot support for IPQ5332 | expand

Message

Kathiravan Thirumoorthy Feb. 6, 2023, 7:12 a.m. UTC 
The IPQ5332 is Qualcomm's 802.11ax SoC for Routers, Gateways and
Access Points.

This series adds minimal board boot support for ipq5332-mi01.2 board.

Also, this series depends on the below patch
https://lore.kernel.org/linux-arm-msm/20230120082631.22053-1-quic_kathirav@quicinc.com/

Changes in V3:
	- Detailed change log is present in respective patches
	- V2 can be found at
	  https://lore.kernel.org/linux-arm-msm/20230130114702.20606-1-quic_kathirav@quicinc.com/

Changes in V2:
	- Rebased on linux-next/master
	- Dropped the 'dt-bindings: mmc: sdhci-msm: add IPQ5332 compatible',
	  since it is already part of linux-next/master
	- Added a new patch 'clk: qcom: ipq5332: mark GPLL4 as critical temporarily'
	- Detailed change log is present in respective patches
	- V1 can be found at
	  https://lore.kernel.org/linux-arm-msm/20230125104520.89684-1-quic_kathirav@quicinc.com/


Kathiravan T (9):
  dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
  pinctrl: qcom: Introduce IPQ5332 TLMM driver
  clk: qcom: Add STROMER PLUS PLL type for IPQ5332
  dt-bindings: clock: Add Qualcomm IPQ5332 GCC
  clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC
  dt-bindings: qcom: add ipq5332 boards
  dt-bindings: firmware: qcom,scm: document IPQ5332 SCM
  arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support
  arm64: defconfig: Enable IPQ5332 SoC base configs

 .../devicetree/bindings/arm/qcom.yaml         |    7 +
 .../bindings/clock/qcom,ipq5332-gcc.yaml      |   61 +
 .../bindings/firmware/qcom,scm.yaml           |    1 +
 .../bindings/pinctrl/qcom,ipq5332-tlmm.yaml   |  134 +
 arch/arm64/boot/dts/qcom/Makefile             |    1 +
 arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts   |   75 +
 arch/arm64/boot/dts/qcom/ipq5332.dtsi         |  268 ++
 arch/arm64/configs/defconfig                  |    2 +
 drivers/clk/qcom/Kconfig                      |    8 +
 drivers/clk/qcom/Makefile                     |    1 +
 drivers/clk/qcom/clk-alpha-pll.c              |   11 +
 drivers/clk/qcom/clk-alpha-pll.h              |    1 +
 drivers/clk/qcom/gcc-ipq5332.c                | 3850 +++++++++++++++++
 drivers/pinctrl/qcom/Kconfig                  |   10 +
 drivers/pinctrl/qcom/Makefile                 |    1 +
 drivers/pinctrl/qcom/pinctrl-ipq5332.c        |  861 ++++
 include/dt-bindings/clock/qcom,ipq5332-gcc.h  |  356 ++
 17 files changed, 5648 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml
 create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts
 create mode 100644 arch/arm64/boot/dts/qcom/ipq5332.dtsi
 create mode 100644 drivers/clk/qcom/gcc-ipq5332.c
 create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq5332.c
 create mode 100644 include/dt-bindings/clock/qcom,ipq5332-gcc.h

Comments

Linus Walleij Feb. 6, 2023, 11:25 a.m. UTC | #1 
Hi Kathiravan,

thanks for your patches!

On Mon, Feb 6, 2023 at 8:12 AM Kathiravan T <quic_kathirav@quicinc.com> wrote:

> Kathiravan T (9):
>   dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
>   pinctrl: qcom: Introduce IPQ5332 TLMM driver

I have applied these two patches to the pin control tree for v6.3.

I see no reason to wait for more review since Krzysztof acked the
bindings and the driver isn't invasive at all, any problems can certainly
be fixed up in-tree.

Yours,
Linus Walleij
Kathiravan Thirumoorthy Feb. 6, 2023, 11:42 a.m. UTC | #2 
On 2/6/2023 4:55 PM, Linus Walleij wrote:
> Hi Kathiravan,
>
> thanks for your patches!
>
> On Mon, Feb 6, 2023 at 8:12 AM Kathiravan T <quic_kathirav@quicinc.com> wrote:
>
>> Kathiravan T (9):
>>    dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl
>>    pinctrl: qcom: Introduce IPQ5332 TLMM driver
> I have applied these two patches to the pin control tree for v6.3.


Thanks a lot Linus!


>
> I see no reason to wait for more review since Krzysztof acked the
> bindings and the driver isn't invasive at all, any problems can certainly
> be fixed up in-tree.
>
> Yours,
> Linus Walleij