diff mbox series

[v3,01/10] dt-bindings: soc: fsl: cpm_qe: Add TSA controller

Message ID 20230113103759.327698-2-herve.codina@bootlin.com (mailing list archive)
State Superseded
Headers show
Series Add the PowerQUICC audio support using the QMC | expand

Commit Message

Herve Codina Jan. 13, 2023, 10:37 a.m. UTC
Add support for the time slot assigner (TSA)
available in some PowerQUICC SoC such as MPC885
or MPC866.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
 .../bindings/soc/fsl/cpm_qe/fsl,tsa.yaml      | 260 ++++++++++++++++++
 include/dt-bindings/soc/fsl,tsa.h             |  13 +
 2 files changed, 273 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml
 create mode 100644 include/dt-bindings/soc/fsl,tsa.h

Comments

Krzysztof Kozlowski Jan. 17, 2023, 11:28 a.m. UTC | #1
On 13/01/2023 11:37, Herve Codina wrote:
> Add support for the time slot assigner (TSA)
> available in some PowerQUICC SoC such as MPC885
> or MPC866.
> 
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> ---
>  .../bindings/soc/fsl/cpm_qe/fsl,tsa.yaml      | 260 ++++++++++++++++++
>  include/dt-bindings/soc/fsl,tsa.h             |  13 +
>  2 files changed, 273 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml
>  create mode 100644 include/dt-bindings/soc/fsl,tsa.h
> 


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Rob Herring Jan. 17, 2023, 2:55 p.m. UTC | #2
On Fri, Jan 13, 2023 at 11:37:50AM +0100, Herve Codina wrote:
> Add support for the time slot assigner (TSA)
> available in some PowerQUICC SoC such as MPC885
> or MPC866.

An odd line wrap length... 

> 
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> ---
>  .../bindings/soc/fsl/cpm_qe/fsl,tsa.yaml      | 260 ++++++++++++++++++
>  include/dt-bindings/soc/fsl,tsa.h             |  13 +
>  2 files changed, 273 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml
>  create mode 100644 include/dt-bindings/soc/fsl,tsa.h
> 
> diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml
> new file mode 100644
> index 000000000000..eb17b6119abd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml
> @@ -0,0 +1,260 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,tsa.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: PowerQUICC CPM Time-slot assigner (TSA) controller
> +
> +maintainers:
> +  - Herve Codina <herve.codina@bootlin.com>
> +
> +description: |

Don't need '|' if no formatting.

> +  The TSA is the time-slot assigner that can be found on some
> +  PowerQUICC SoC.
> +  Its purpose is to route some TDM time-slots to other internal
> +  serial controllers.

Wrap at 80.

> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - fsl,mpc885-tsa
> +          - fsl,mpc866-tsa
> +      - const: fsl,cpm1-tsa
> +
> +  reg:
> +    items:
> +      - description: SI (Serial Interface) register base
> +      - description: SI RAM base
> +
> +  reg-names:
> +    items:
> +      - const: si_regs
> +      - const: si_ram
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +patternProperties:
> +  '^tdm@[0-1]$':
> +    description:
> +      The TDM managed by this controller
> +    type: object

       additionalProperties: false

> +
> +    properties:
> +      reg:
> +        minimum: 0
> +        maximum: 1
> +        description:
> +          The TDM number for this TDM, 0 for TDMa and 1 for TDMb
> +
> +      fsl,common-rxtx-pins:
> +        $ref: /schemas/types.yaml#/definitions/flag
> +        description:
> +          The hardware can use four dedicated pins for Tx clock,
> +          Tx sync, Rx clock and Rx sync or use only two pins,
> +          Tx/Rx clock and Rx/Rx sync.
> +          Without the 'fsl,common-rxtx-pins' property, the four
> +          pins are used. With the 'fsl,common-rxtx-pins' property,
> +          two pins are used.
> +
> +      clocks:
> +        minItems: 2
> +        maxItems: 4
> +
> +      clock-names:
> +        minItems: 2
> +        maxItems: 4
> +
> +      fsl,mode:

'mode' is a bit vague. It's already used as well which can be a problem 
if there are differing types. (There's not in this case)

> +        $ref: /schemas/types.yaml#/definitions/string
> +        enum: [normal, echo, internal-loopback, control-loopback]
> +        default: normal
> +        description: |
> +          Operational mode:
> +            - normal:
> +                Normal operation
> +            - echo:
> +                Automatic echo. Rx data is resent on Tx
> +            - internal-loopback:
> +                The TDM transmitter is connected to the receiver.
> +                Data appears on Tx pin.
> +            - control-loopback:
> +                The TDM transmitter is connected to the receiver.
> +                The Tx pin is disconnected.
> +
> +      fsl,rx-frame-sync-delay-bits:
> +        enum: [0, 1, 2, 3]
> +        default: 0
> +        description: |
> +          Receive frame sync delay in number of bits.
> +          Indicates the delay between the Rx sync and the first bit of the
> +          Rx frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay.
> +
> +      fsl,tx-frame-sync-delay-bits:
> +        enum: [0, 1, 2, 3]
> +        default: 0
> +        description: |
> +          Transmit frame sync delay in number of bits.
> +          Indicates the delay between the Tx sync and the first bit of the
> +          Tx frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay.
> +
> +      fsl,clock-falling-edge:
> +        $ref: /schemas/types.yaml#/definitions/flag
> +        description: |
> +          Data is sent on falling edge of the clock (and received on the
> +          rising edge).
> +          If 'clock-falling-edge' is not present, data is sent on the
> +          rising edge (and received on the falling edge).
> +
> +      fsl,fsync-rising-edge:
> +        $ref: /schemas/types.yaml#/definitions/flag
> +        description:
> +          Frame sync pulses are sampled with the rising edge of the channel
> +          clock. If 'fsync-rising-edge' is not present, pulses are sample
> +          with e falling edge.
> +
> +      fsl,double-speed-clock:
> +        $ref: /schemas/types.yaml#/definitions/flag
> +        description:
> +          The channel clock is twice the data rate.
> +
> +      fsl,tx-ts-routes:
> +        $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +        description: |
> +          A list of tupple that indicates the Tx time-slots routes.
> +            tx_ts_routes =
> +               < 2 0 >, /* The first 2 time slots are not used */
> +               < 3 1 >, /* The next 3 ones are route to SCC2 */
> +               < 4 0 >, /* The next 4 ones are not used */
> +               < 2 2 >; /* The nest 2 ones are route to SCC3 */
> +        items:
> +          items:
> +            - description:
> +                The number of time-slots
> +              minimum: 1
> +              maximum: 64
> +            - description: |
> +                The source serial interface (dt-bindings/soc/fsl,tsa.h
> +                defines these values)
> +                 - 0: No destination
> +                 - 1: SCC2
> +                 - 2: SCC3
> +                 - 3: SCC4
> +                 - 4: SMC1
> +                 - 5: SMC2
> +              enum: [0, 1, 2, 3, 4, 5]
> +        minItems: 1
> +        maxItems: 64
> +
> +      fsl,rx-ts-routes:
> +        $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +        description: |
> +          A list of tupple that indicates the Rx time-slots routes.
> +            tx_ts_routes =
> +               < 2 0 >, /* The first 2 time slots are not used */
> +               < 3 1 >, /* The next 3 ones are route from SCC2 */
> +               < 4 0 >, /* The next 4 ones are not used */
> +               < 2 2 >; /* The nest 2 ones are route from SCC3 */
> +        items:
> +          items:
> +            - description:
> +                The number of time-slots
> +              minimum: 1
> +              maximum: 64
> +            - description: |
> +                The destination serial interface (dt-bindings/soc/fsl,tsa.h
> +                defines these values)
> +                 - 0: No destination
> +                 - 1: SCC2
> +                 - 2: SCC3
> +                 - 3: SCC4
> +                 - 4: SMC1
> +                 - 5: SMC2
> +              enum: [0, 1, 2, 3, 4, 5]
> +        minItems: 1
> +        maxItems: 64
> +
> +    allOf:
> +      # If fsl,common-rxtx-pins is present, only 2 clocks are needed.
> +      # Else, the 4 clocks must be present.
> +      - if:
> +          required:
> +            - fsl,common-rxtx-pins
> +        then:
> +          properties:
> +            clocks:
> +              items:
> +                - description: External clock connected to L1RSYNC pin
> +                - description: External clock connected to L1RCLK pin
> +            clock-names:
> +              items:
> +                - const: l1rsync
> +                - const: l1rclk
> +        else:
> +          properties:
> +            clocks:
> +              items:
> +                - description: External clock connected to L1RSYNC pin
> +                - description: External clock connected to L1RCLK pin
> +                - description: External clock connected to L1TSYNC pin
> +                - description: External clock connected to L1TCLK pin
> +            clock-names:
> +              items:
> +                - const: l1rsync
> +                - const: l1rclk
> +                - const: l1tsync
> +                - const: l1tclk

As the names are the same, just the length varies between 2 or 4, move 
all this to the main definition and here just put constraints on the 
length.

> +
> +    required:
> +      - reg
> +      - clocks
> +      - clock-names
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - '#address-cells'
> +  - '#size-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/soc/fsl,tsa.h>
> +
> +    tsa@ae0 {
> +        compatible = "fsl,mpc885-tsa", "fsl,cpm1-tsa";
> +        reg = <0xae0 0x10>,
> +              <0xc00 0x200>;
> +        reg-names = "si_regs", "si_ram";
> +
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        tdm@0 {
> +            /* TDMa */
> +            reg = <0>;
> +
> +            clocks = <&clk_l1rsynca>, <&clk_l1rclka>;
> +            clock-names = "l1rsync", "l1rclk";
> +
> +            fsl,common-rxtx-pins;
> +            fsl,fsync-rising-edge;
> +
> +            fsl,tx-ts-routes = < 2 0 >,             /* TS 0..1 */
> +                           < 24 FSL_CPM_TSA_SCC4 >, /* TS 2..25 */
> +                           < 1 0 >,                 /* TS 26 */
> +                           < 5 FSL_CPM_TSA_SCC3 >;  /* TS 27..31 */
> +
> +            fsl,rx-ts-routes = < 2 0 >,             /* TS 0..1 */
> +                           < 24 FSL_CPM_TSA_SCC4 >, /* 2..25 */
> +                           < 1 0 >,                 /* TS 26 */
> +                           < 5 FSL_CPM_TSA_SCC3 >;  /* TS 27..31 */
> +        };
> +    };
> diff --git a/include/dt-bindings/soc/fsl,tsa.h b/include/dt-bindings/soc/fsl,tsa.h
> new file mode 100644
> index 000000000000..2cc44e867dbe
> --- /dev/null
> +++ b/include/dt-bindings/soc/fsl,tsa.h
> @@ -0,0 +1,13 @@
> +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> +
> +#ifndef __DT_BINDINGS_SOC_FSL_TSA_H
> +#define __DT_BINDINGS_SOC_FSL_TSA_H
> +
> +#define FSL_CPM_TSA_NU		0	/* Pseuso Cell Id for not used item */
> +#define FSL_CPM_TSA_SCC2	1
> +#define FSL_CPM_TSA_SCC3	2
> +#define FSL_CPM_TSA_SCC4	3
> +#define FSL_CPM_TSA_SMC1	4
> +#define FSL_CPM_TSA_SMC2	5
> +
> +#endif
> -- 
> 2.38.1
>
Herve Codina Jan. 23, 2023, 11:36 a.m. UTC | #3
Hi Rob,

On Tue, 17 Jan 2023 08:55:29 -0600
Rob Herring <robh@kernel.org> wrote:

> On Fri, Jan 13, 2023 at 11:37:50AM +0100, Herve Codina wrote:
> > Add support for the time slot assigner (TSA)
> > available in some PowerQUICC SoC such as MPC885
> > or MPC866.  
> 
> An odd line wrap length... 

Will be changed in v4.

> 
> > 
> > Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> > ---
> >  .../bindings/soc/fsl/cpm_qe/fsl,tsa.yaml      | 260 ++++++++++++++++++
> >  include/dt-bindings/soc/fsl,tsa.h             |  13 +
> >  2 files changed, 273 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml
> >  create mode 100644 include/dt-bindings/soc/fsl,tsa.h
> > 
> > diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml
> > new file mode 100644
> > index 000000000000..eb17b6119abd
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml
> > @@ -0,0 +1,260 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,tsa.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: PowerQUICC CPM Time-slot assigner (TSA) controller
> > +
> > +maintainers:
> > +  - Herve Codina <herve.codina@bootlin.com>
> > +
> > +description: |  
> 
> Don't need '|' if no formatting.

Will be changed in v4.

> 
> > +  The TSA is the time-slot assigner that can be found on some
> > +  PowerQUICC SoC.
> > +  Its purpose is to route some TDM time-slots to other internal
> > +  serial controllers.  
> 
> Wrap at 80.

Will be fixed in v4.

> 
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - enum:
> > +          - fsl,mpc885-tsa
> > +          - fsl,mpc866-tsa
> > +      - const: fsl,cpm1-tsa
> > +
> > +  reg:
> > +    items:
> > +      - description: SI (Serial Interface) register base
> > +      - description: SI RAM base
> > +
> > +  reg-names:
> > +    items:
> > +      - const: si_regs
> > +      - const: si_ram
> > +
> > +  '#address-cells':
> > +    const: 1
> > +
> > +  '#size-cells':
> > +    const: 0
> > +
> > +patternProperties:
> > +  '^tdm@[0-1]$':
> > +    description:
> > +      The TDM managed by this controller
> > +    type: object  
> 
>        additionalProperties: false

Will be added in v4.

> 
> > +
> > +    properties:
> > +      reg:
> > +        minimum: 0
> > +        maximum: 1
> > +        description:
> > +          The TDM number for this TDM, 0 for TDMa and 1 for TDMb
> > +
> > +      fsl,common-rxtx-pins:
> > +        $ref: /schemas/types.yaml#/definitions/flag
> > +        description:
> > +          The hardware can use four dedicated pins for Tx clock,
> > +          Tx sync, Rx clock and Rx sync or use only two pins,
> > +          Tx/Rx clock and Rx/Rx sync.
> > +          Without the 'fsl,common-rxtx-pins' property, the four
> > +          pins are used. With the 'fsl,common-rxtx-pins' property,
> > +          two pins are used.
> > +
> > +      clocks:
> > +        minItems: 2
> > +        maxItems: 4
> > +
> > +      clock-names:
> > +        minItems: 2
> > +        maxItems: 4
> > +
> > +      fsl,mode:  
> 
> 'mode' is a bit vague. It's already used as well which can be a problem 
> if there are differing types. (There's not in this case)

What do you think about:
      fsl,diagnostic-mode:
        $ref: /schemas/types.yaml#/definitions/string
        enum: [disabled, echo, internal-loopback, control-loopback]
        default: disabled
        description: |
          The diagnostic mode can be used to diagnose some communication issues.
          It should not be present (or set to 'disabled') when diagnostic is not
          needed.
          Diagnostic mode:
            - disabled:
                Diagnostic disabled (ie. normal operation)
            - echo:
                Automatic echo. Rx data is resent on Tx
            - internal-loopback:
                The TDM transmitter is connected to the receiver.
                Data appears on Tx pin.
            - control-loopback:
                The TDM transmitter is connected to the receiver.
                The Tx pin is disconnected.

> 
> > +        $ref: /schemas/types.yaml#/definitions/string
> > +        enum: [normal, echo, internal-loopback, control-loopback]
> > +        default: normal
> > +        description: |
> > +          Operational mode:
> > +            - normal:
> > +                Normal operation
> > +            - echo:
> > +                Automatic echo. Rx data is resent on Tx
> > +            - internal-loopback:
> > +                The TDM transmitter is connected to the receiver.
> > +                Data appears on Tx pin.
> > +            - control-loopback:
> > +                The TDM transmitter is connected to the receiver.
> > +                The Tx pin is disconnected.
> > +
> > +      fsl,rx-frame-sync-delay-bits:
> > +        enum: [0, 1, 2, 3]
> > +        default: 0
> > +        description: |
> > +          Receive frame sync delay in number of bits.
> > +          Indicates the delay between the Rx sync and the first bit of the
> > +          Rx frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay.
> > +
> > +      fsl,tx-frame-sync-delay-bits:
> > +        enum: [0, 1, 2, 3]
> > +        default: 0
> > +        description: |
> > +          Transmit frame sync delay in number of bits.
> > +          Indicates the delay between the Tx sync and the first bit of the
> > +          Tx frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay.
> > +
> > +      fsl,clock-falling-edge:
> > +        $ref: /schemas/types.yaml#/definitions/flag
> > +        description: |
> > +          Data is sent on falling edge of the clock (and received on the
> > +          rising edge).
> > +          If 'clock-falling-edge' is not present, data is sent on the
> > +          rising edge (and received on the falling edge).
> > +
> > +      fsl,fsync-rising-edge:
> > +        $ref: /schemas/types.yaml#/definitions/flag
> > +        description:
> > +          Frame sync pulses are sampled with the rising edge of the channel
> > +          clock. If 'fsync-rising-edge' is not present, pulses are sample
> > +          with e falling edge.
> > +
> > +      fsl,double-speed-clock:
> > +        $ref: /schemas/types.yaml#/definitions/flag
> > +        description:
> > +          The channel clock is twice the data rate.
> > +
> > +      fsl,tx-ts-routes:
> > +        $ref: /schemas/types.yaml#/definitions/uint32-matrix
> > +        description: |
> > +          A list of tupple that indicates the Tx time-slots routes.
> > +            tx_ts_routes =
> > +               < 2 0 >, /* The first 2 time slots are not used */
> > +               < 3 1 >, /* The next 3 ones are route to SCC2 */
> > +               < 4 0 >, /* The next 4 ones are not used */
> > +               < 2 2 >; /* The nest 2 ones are route to SCC3 */
> > +        items:
> > +          items:
> > +            - description:
> > +                The number of time-slots
> > +              minimum: 1
> > +              maximum: 64
> > +            - description: |
> > +                The source serial interface (dt-bindings/soc/fsl,tsa.h
> > +                defines these values)
> > +                 - 0: No destination
> > +                 - 1: SCC2
> > +                 - 2: SCC3
> > +                 - 3: SCC4
> > +                 - 4: SMC1
> > +                 - 5: SMC2
> > +              enum: [0, 1, 2, 3, 4, 5]
> > +        minItems: 1
> > +        maxItems: 64
> > +
> > +      fsl,rx-ts-routes:
> > +        $ref: /schemas/types.yaml#/definitions/uint32-matrix
> > +        description: |
> > +          A list of tupple that indicates the Rx time-slots routes.
> > +            tx_ts_routes =
> > +               < 2 0 >, /* The first 2 time slots are not used */
> > +               < 3 1 >, /* The next 3 ones are route from SCC2 */
> > +               < 4 0 >, /* The next 4 ones are not used */
> > +               < 2 2 >; /* The nest 2 ones are route from SCC3 */
> > +        items:
> > +          items:
> > +            - description:
> > +                The number of time-slots
> > +              minimum: 1
> > +              maximum: 64
> > +            - description: |
> > +                The destination serial interface (dt-bindings/soc/fsl,tsa.h
> > +                defines these values)
> > +                 - 0: No destination
> > +                 - 1: SCC2
> > +                 - 2: SCC3
> > +                 - 3: SCC4
> > +                 - 4: SMC1
> > +                 - 5: SMC2
> > +              enum: [0, 1, 2, 3, 4, 5]
> > +        minItems: 1
> > +        maxItems: 64
> > +
> > +    allOf:
> > +      # If fsl,common-rxtx-pins is present, only 2 clocks are needed.
> > +      # Else, the 4 clocks must be present.
> > +      - if:
> > +          required:
> > +            - fsl,common-rxtx-pins
> > +        then:
> > +          properties:
> > +            clocks:
> > +              items:
> > +                - description: External clock connected to L1RSYNC pin
> > +                - description: External clock connected to L1RCLK pin
> > +            clock-names:
> > +              items:
> > +                - const: l1rsync
> > +                - const: l1rclk
> > +        else:
> > +          properties:
> > +            clocks:
> > +              items:
> > +                - description: External clock connected to L1RSYNC pin
> > +                - description: External clock connected to L1RCLK pin
> > +                - description: External clock connected to L1TSYNC pin
> > +                - description: External clock connected to L1TCLK pin
> > +            clock-names:
> > +              items:
> > +                - const: l1rsync
> > +                - const: l1rclk
> > +                - const: l1tsync
> > +                - const: l1tclk  
> 
> As the names are the same, just the length varies between 2 or 4, move 
> all this to the main definition and here just put constraints on the 
> length.

Ok, will be done in v4.

> 
> > +
> > +    required:
> > +      - reg
> > +      - clocks
> > +      - clock-names
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - reg-names
> > +  - '#address-cells'
> > +  - '#size-cells'
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/soc/fsl,tsa.h>
> > +
> > +    tsa@ae0 {
> > +        compatible = "fsl,mpc885-tsa", "fsl,cpm1-tsa";
> > +        reg = <0xae0 0x10>,
> > +              <0xc00 0x200>;
> > +        reg-names = "si_regs", "si_ram";
> > +
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        tdm@0 {
> > +            /* TDMa */
> > +            reg = <0>;
> > +
> > +            clocks = <&clk_l1rsynca>, <&clk_l1rclka>;
> > +            clock-names = "l1rsync", "l1rclk";
> > +
> > +            fsl,common-rxtx-pins;
> > +            fsl,fsync-rising-edge;
> > +
> > +            fsl,tx-ts-routes = < 2 0 >,             /* TS 0..1 */
> > +                           < 24 FSL_CPM_TSA_SCC4 >, /* TS 2..25 */
> > +                           < 1 0 >,                 /* TS 26 */
> > +                           < 5 FSL_CPM_TSA_SCC3 >;  /* TS 27..31 */
> > +
> > +            fsl,rx-ts-routes = < 2 0 >,             /* TS 0..1 */
> > +                           < 24 FSL_CPM_TSA_SCC4 >, /* 2..25 */
> > +                           < 1 0 >,                 /* TS 26 */
> > +                           < 5 FSL_CPM_TSA_SCC3 >;  /* TS 27..31 */
> > +        };
> > +    };
> > diff --git a/include/dt-bindings/soc/fsl,tsa.h b/include/dt-bindings/soc/fsl,tsa.h
> > new file mode 100644
> > index 000000000000..2cc44e867dbe
> > --- /dev/null
> > +++ b/include/dt-bindings/soc/fsl,tsa.h
> > @@ -0,0 +1,13 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +
> > +#ifndef __DT_BINDINGS_SOC_FSL_TSA_H
> > +#define __DT_BINDINGS_SOC_FSL_TSA_H
> > +
> > +#define FSL_CPM_TSA_NU		0	/* Pseuso Cell Id for not used item */
> > +#define FSL_CPM_TSA_SCC2	1
> > +#define FSL_CPM_TSA_SCC3	2
> > +#define FSL_CPM_TSA_SCC4	3
> > +#define FSL_CPM_TSA_SMC1	4
> > +#define FSL_CPM_TSA_SMC2	5
> > +
> > +#endif
> > -- 
> > 2.38.1
> >   

Thanks for the review,

Hervé
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml
new file mode 100644
index 000000000000..eb17b6119abd
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml
@@ -0,0 +1,260 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,tsa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PowerQUICC CPM Time-slot assigner (TSA) controller
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description: |
+  The TSA is the time-slot assigner that can be found on some
+  PowerQUICC SoC.
+  Its purpose is to route some TDM time-slots to other internal
+  serial controllers.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,mpc885-tsa
+          - fsl,mpc866-tsa
+      - const: fsl,cpm1-tsa
+
+  reg:
+    items:
+      - description: SI (Serial Interface) register base
+      - description: SI RAM base
+
+  reg-names:
+    items:
+      - const: si_regs
+      - const: si_ram
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^tdm@[0-1]$':
+    description:
+      The TDM managed by this controller
+    type: object
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+        description:
+          The TDM number for this TDM, 0 for TDMa and 1 for TDMb
+
+      fsl,common-rxtx-pins:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The hardware can use four dedicated pins for Tx clock,
+          Tx sync, Rx clock and Rx sync or use only two pins,
+          Tx/Rx clock and Rx/Rx sync.
+          Without the 'fsl,common-rxtx-pins' property, the four
+          pins are used. With the 'fsl,common-rxtx-pins' property,
+          two pins are used.
+
+      clocks:
+        minItems: 2
+        maxItems: 4
+
+      clock-names:
+        minItems: 2
+        maxItems: 4
+
+      fsl,mode:
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [normal, echo, internal-loopback, control-loopback]
+        default: normal
+        description: |
+          Operational mode:
+            - normal:
+                Normal operation
+            - echo:
+                Automatic echo. Rx data is resent on Tx
+            - internal-loopback:
+                The TDM transmitter is connected to the receiver.
+                Data appears on Tx pin.
+            - control-loopback:
+                The TDM transmitter is connected to the receiver.
+                The Tx pin is disconnected.
+
+      fsl,rx-frame-sync-delay-bits:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          Receive frame sync delay in number of bits.
+          Indicates the delay between the Rx sync and the first bit of the
+          Rx frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay.
+
+      fsl,tx-frame-sync-delay-bits:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          Transmit frame sync delay in number of bits.
+          Indicates the delay between the Tx sync and the first bit of the
+          Tx frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay.
+
+      fsl,clock-falling-edge:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: |
+          Data is sent on falling edge of the clock (and received on the
+          rising edge).
+          If 'clock-falling-edge' is not present, data is sent on the
+          rising edge (and received on the falling edge).
+
+      fsl,fsync-rising-edge:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Frame sync pulses are sampled with the rising edge of the channel
+          clock. If 'fsync-rising-edge' is not present, pulses are sample
+          with e falling edge.
+
+      fsl,double-speed-clock:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The channel clock is twice the data rate.
+
+      fsl,tx-ts-routes:
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        description: |
+          A list of tupple that indicates the Tx time-slots routes.
+            tx_ts_routes =
+               < 2 0 >, /* The first 2 time slots are not used */
+               < 3 1 >, /* The next 3 ones are route to SCC2 */
+               < 4 0 >, /* The next 4 ones are not used */
+               < 2 2 >; /* The nest 2 ones are route to SCC3 */
+        items:
+          items:
+            - description:
+                The number of time-slots
+              minimum: 1
+              maximum: 64
+            - description: |
+                The source serial interface (dt-bindings/soc/fsl,tsa.h
+                defines these values)
+                 - 0: No destination
+                 - 1: SCC2
+                 - 2: SCC3
+                 - 3: SCC4
+                 - 4: SMC1
+                 - 5: SMC2
+              enum: [0, 1, 2, 3, 4, 5]
+        minItems: 1
+        maxItems: 64
+
+      fsl,rx-ts-routes:
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        description: |
+          A list of tupple that indicates the Rx time-slots routes.
+            tx_ts_routes =
+               < 2 0 >, /* The first 2 time slots are not used */
+               < 3 1 >, /* The next 3 ones are route from SCC2 */
+               < 4 0 >, /* The next 4 ones are not used */
+               < 2 2 >; /* The nest 2 ones are route from SCC3 */
+        items:
+          items:
+            - description:
+                The number of time-slots
+              minimum: 1
+              maximum: 64
+            - description: |
+                The destination serial interface (dt-bindings/soc/fsl,tsa.h
+                defines these values)
+                 - 0: No destination
+                 - 1: SCC2
+                 - 2: SCC3
+                 - 3: SCC4
+                 - 4: SMC1
+                 - 5: SMC2
+              enum: [0, 1, 2, 3, 4, 5]
+        minItems: 1
+        maxItems: 64
+
+    allOf:
+      # If fsl,common-rxtx-pins is present, only 2 clocks are needed.
+      # Else, the 4 clocks must be present.
+      - if:
+          required:
+            - fsl,common-rxtx-pins
+        then:
+          properties:
+            clocks:
+              items:
+                - description: External clock connected to L1RSYNC pin
+                - description: External clock connected to L1RCLK pin
+            clock-names:
+              items:
+                - const: l1rsync
+                - const: l1rclk
+        else:
+          properties:
+            clocks:
+              items:
+                - description: External clock connected to L1RSYNC pin
+                - description: External clock connected to L1RCLK pin
+                - description: External clock connected to L1TSYNC pin
+                - description: External clock connected to L1TCLK pin
+            clock-names:
+              items:
+                - const: l1rsync
+                - const: l1rclk
+                - const: l1tsync
+                - const: l1tclk
+
+    required:
+      - reg
+      - clocks
+      - clock-names
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/fsl,tsa.h>
+
+    tsa@ae0 {
+        compatible = "fsl,mpc885-tsa", "fsl,cpm1-tsa";
+        reg = <0xae0 0x10>,
+              <0xc00 0x200>;
+        reg-names = "si_regs", "si_ram";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tdm@0 {
+            /* TDMa */
+            reg = <0>;
+
+            clocks = <&clk_l1rsynca>, <&clk_l1rclka>;
+            clock-names = "l1rsync", "l1rclk";
+
+            fsl,common-rxtx-pins;
+            fsl,fsync-rising-edge;
+
+            fsl,tx-ts-routes = < 2 0 >,             /* TS 0..1 */
+                           < 24 FSL_CPM_TSA_SCC4 >, /* TS 2..25 */
+                           < 1 0 >,                 /* TS 26 */
+                           < 5 FSL_CPM_TSA_SCC3 >;  /* TS 27..31 */
+
+            fsl,rx-ts-routes = < 2 0 >,             /* TS 0..1 */
+                           < 24 FSL_CPM_TSA_SCC4 >, /* 2..25 */
+                           < 1 0 >,                 /* TS 26 */
+                           < 5 FSL_CPM_TSA_SCC3 >;  /* TS 27..31 */
+        };
+    };
diff --git a/include/dt-bindings/soc/fsl,tsa.h b/include/dt-bindings/soc/fsl,tsa.h
new file mode 100644
index 000000000000..2cc44e867dbe
--- /dev/null
+++ b/include/dt-bindings/soc/fsl,tsa.h
@@ -0,0 +1,13 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+
+#ifndef __DT_BINDINGS_SOC_FSL_TSA_H
+#define __DT_BINDINGS_SOC_FSL_TSA_H
+
+#define FSL_CPM_TSA_NU		0	/* Pseuso Cell Id for not used item */
+#define FSL_CPM_TSA_SCC2	1
+#define FSL_CPM_TSA_SCC3	2
+#define FSL_CPM_TSA_SCC4	3
+#define FSL_CPM_TSA_SMC1	4
+#define FSL_CPM_TSA_SMC2	5
+
+#endif