mbox series

[0/7] Misc NPCM7XX patches

Message ID 20210813233353.2099459-1-wuhaotsh@google.com
Headers show
Series Misc NPCM7XX patches | expand

Message

Hao Wu Aug. 13, 2021, 11:33 p.m. UTC 
This patch set contains a few bug fixes and I2C devices for some
NPCM7XX boards.

Patch 1~2 fix a problem that causes the SMBus module to behave
incorrectly when it's in FIFO mode and trying to receive more than
16 bytes at a time.

Patch 3 fixes a error in a register for ADC module.

Patch 4 makes the ADC input to be R/W instead of write only. It allows
a test system to read these via QMP and has no negative effect.

Patch 5 adds a new aux function for at24c EEPROM. It allows us to attach
a drive to an at24c EEPROM device that is used as the initialized content
of that device.

Patch 6 uses the function defined in patch 5 to add the EEPROM and other
I2C devices for Quanta GBS board.

Patch 7 modifies the Quanta GSJ board to use the new function defined in
patch 5.

Hao Wu (6):
  hw/i2c: Clear ACK bit in NPCM7xx SMBus module
  hw/i2c: Read FIFO during RXF_CTL change in NPCM7XX SMBus
  hw/adc: Fix CONV bit in NPCM7XX ADC CON register
  hw/adc: Make adci[*] R/W in NPCM7XX ADC
  hw/nvram: Add a new auxiliary function to init at24c eeprom
  hw/arm: Use unit number in quanta-gsj eeprom files

Patrick Venture (1):
  hw/arm: quanta-gbs-bmc add i2c devices

 hw/adc/npcm7xx_adc.c            |  4 +-
 hw/arm/npcm7xx_boards.c         | 94 ++++++++++++++++-----------------
 hw/i2c/npcm7xx_smbus.c          |  8 +--
 hw/nvram/eeprom_at24c.c         | 18 +++++++
 include/hw/nvram/eeprom_at24c.h | 13 +++++
 tests/qtest/npcm7xx_adc-test.c  |  2 +-
 6 files changed, 85 insertions(+), 54 deletions(-)
 create mode 100644 include/hw/nvram/eeprom_at24c.h

Comments

Peter Maydell Aug. 19, 2021, 2 p.m. UTC | #1 
On Sat, 14 Aug 2021 at 00:34, Hao Wu <wuhaotsh@google.com> wrote:
>
> This patch set contains a few bug fixes and I2C devices for some
> NPCM7XX boards.
>
> Patch 1~2 fix a problem that causes the SMBus module to behave
> incorrectly when it's in FIFO mode and trying to receive more than
> 16 bytes at a time.
>
> Patch 3 fixes a error in a register for ADC module.
>
> Patch 4 makes the ADC input to be R/W instead of write only. It allows
> a test system to read these via QMP and has no negative effect.
>
> Patch 5 adds a new aux function for at24c EEPROM. It allows us to attach
> a drive to an at24c EEPROM device that is used as the initialized content
> of that device.
>
> Patch 6 uses the function defined in patch 5 to add the EEPROM and other
> I2C devices for Quanta GBS board.
>
> Patch 7 modifies the Quanta GSJ board to use the new function defined in
> patch 5.

I've left review comments on a few of the patches. The first 4 look
fine; I just haven't left r-by tags because I didn't go and look
up the specs for the hardware.

thanks
-- PMM