| Message ID | 20210809171342.18146-2-lvivier@redhat.com |
|---|---|
| State | New |
| Headers | show |
| Series | virtio: failover: allow to keep the VFIO device rather than the virtio-net one | expand |
On Tue, Aug 10, 2021 at 1:14 AM Laurent Vivier <lvivier@redhat.com> wrote: > > If the guest driver doesn't support the STANDBY feature, by default > we keep the virtio-net device and don't hotplug the VFIO device, > but in some cases, user can prefer to use the VFIO device rather > than the virtio-net one. We can't unplug the virtio-net device > (because on migration it is expected on the destination side) > but we can force the guest driver to be disabled. Then, we can > hotplug the VFIO device that will be unplugged before the migration > like in the normal failover migration but without the failover device. > > This patch adds a new property to virtio-net device: "failover-default". > > By default, "failover-default" is set to true and thus the default NIC > to use if the failover cannot be enabled is the virtio-net device > (this is what is done until now with the virtio-net failover). > > If "failover-default" is set to false, in case of error, the virtio-net > device is not the default anymore and the failover primary device > is used instead. > > If the STANDBY feature is supported by guest and host, the virtio-net > failover acts as usual. > > Signed-off-by: Laurent Vivier <lvivier@redhat.com> > --- > include/hw/virtio/virtio-net.h | 1 + > hw/net/virtio-net.c | 49 +++++++++++++++++++++++++++++----- > 2 files changed, 44 insertions(+), 6 deletions(-) > > diff --git a/include/hw/virtio/virtio-net.h b/include/hw/virtio/virtio-net.h > index 824a69c23f06..ab77930a327e 100644 > --- a/include/hw/virtio/virtio-net.h > +++ b/include/hw/virtio/virtio-net.h > @@ -208,6 +208,7 @@ struct VirtIONet { > /* primary failover device is hidden*/ > bool failover_primary_hidden; > bool failover; > + bool failover_default; > DeviceListener primary_listener; > Notifier migration_state; > VirtioNetRssData rss_data; > diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c > index 16d20cdee52a..972c03232a96 100644 > --- a/hw/net/virtio-net.c > +++ b/hw/net/virtio-net.c > @@ -935,12 +935,23 @@ static void virtio_net_set_features(VirtIODevice *vdev, uint64_t features) > memset(n->vlans, 0xff, MAX_VLAN >> 3); > } > > - if (virtio_has_feature(features, VIRTIO_NET_F_STANDBY)) { > - qapi_event_send_failover_negotiated(n->netclient_name); > - qatomic_set(&n->failover_primary_hidden, false); > - failover_add_primary(n, &err); > - if (err) { > - warn_report_err(err); > + /* > + * if the virtio-net driver has the STANDBY feature, we can plug the primary > + * if not but is not the default failover device, > + * we need to plug the primary alone and the virtio-net driver will > + * be disabled in the validate_features() function but validate_features() > + * is only available with virtio 1.0 spec > + */ > + if (n->failover) { > + if (virtio_has_feature(features, VIRTIO_NET_F_STANDBY) || > + (virtio_has_feature(features, VIRTIO_F_VERSION_1) && I think STANDY implies VERSION_1. And if we do this, it means it doesn't work for legacy drivers. Not sure if it's an issue. Thanks > + !n->failover_default)) { > + qapi_event_send_failover_negotiated(n->netclient_name); > + qatomic_set(&n->failover_primary_hidden, false); > + failover_add_primary(n, &err); > + if (err) { > + warn_report_err(err); > + } > } > } > } > @@ -3625,9 +3636,34 @@ static Property virtio_net_properties[] = { > DEFINE_PROP_INT32("speed", VirtIONet, net_conf.speed, SPEED_UNKNOWN), > DEFINE_PROP_STRING("duplex", VirtIONet, net_conf.duplex_str), > DEFINE_PROP_BOOL("failover", VirtIONet, failover, false), > + DEFINE_PROP_BOOL("failover-default", VirtIONet, failover_default, true), > DEFINE_PROP_END_OF_LIST(), > }; > > +/* validate_features() is only available with VIRTIO_F_VERSION_1 */ > +static int failover_validate_features(VirtIODevice *vdev) > +{ > + VirtIONet *n = VIRTIO_NET(vdev); > + > + /* > + * If the guest driver doesn't support the STANDBY feature, by default > + * we keep the virtio-net device and don't hotplug the VFIO device, > + * but in some cases, user can prefer to use the VFIO device rather > + * than the virtio-net one. We can't unplug the virtio-net device > + * (because on migration it is expected on the destination side) > + * but we can force the guest driver to be disabled. In this case, We can > + * hotplug the VFIO device that will be unplugged before the migration > + * like in the normal failover migration but without the failover device. > + */ > + if (n->failover && !n->failover_default && > + !virtio_vdev_has_feature(vdev, VIRTIO_NET_F_STANDBY)) { > + /* disable virtio-net */ > + return -ENODEV; > + } > + > + return 0; > +} > + > static void virtio_net_class_init(ObjectClass *klass, void *data) > { > DeviceClass *dc = DEVICE_CLASS(klass); > @@ -3651,6 +3687,7 @@ static void virtio_net_class_init(ObjectClass *klass, void *data) > vdc->post_load = virtio_net_post_load_virtio; > vdc->vmsd = &vmstate_virtio_net_device; > vdc->primary_unplug_pending = primary_unplug_pending; > + vdc->validate_features = failover_validate_features; > } > > static const TypeInfo virtio_net_info = { > -- > 2.31.1 >
On 11/08/2021 06:18, Jason Wang wrote: > On Tue, Aug 10, 2021 at 1:14 AM Laurent Vivier <lvivier@redhat.com> wrote: >> >> If the guest driver doesn't support the STANDBY feature, by default >> we keep the virtio-net device and don't hotplug the VFIO device, >> but in some cases, user can prefer to use the VFIO device rather >> than the virtio-net one. We can't unplug the virtio-net device >> (because on migration it is expected on the destination side) >> but we can force the guest driver to be disabled. Then, we can >> hotplug the VFIO device that will be unplugged before the migration >> like in the normal failover migration but without the failover device. >> >> This patch adds a new property to virtio-net device: "failover-default". >> >> By default, "failover-default" is set to true and thus the default NIC >> to use if the failover cannot be enabled is the virtio-net device >> (this is what is done until now with the virtio-net failover). >> >> If "failover-default" is set to false, in case of error, the virtio-net >> device is not the default anymore and the failover primary device >> is used instead. >> >> If the STANDBY feature is supported by guest and host, the virtio-net >> failover acts as usual. >> >> Signed-off-by: Laurent Vivier <lvivier@redhat.com> >> --- >> include/hw/virtio/virtio-net.h | 1 + >> hw/net/virtio-net.c | 49 +++++++++++++++++++++++++++++----- >> 2 files changed, 44 insertions(+), 6 deletions(-) >> >> diff --git a/include/hw/virtio/virtio-net.h b/include/hw/virtio/virtio-net.h >> index 824a69c23f06..ab77930a327e 100644 >> --- a/include/hw/virtio/virtio-net.h >> +++ b/include/hw/virtio/virtio-net.h >> @@ -208,6 +208,7 @@ struct VirtIONet { >> /* primary failover device is hidden*/ >> bool failover_primary_hidden; >> bool failover; >> + bool failover_default; >> DeviceListener primary_listener; >> Notifier migration_state; >> VirtioNetRssData rss_data; >> diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c >> index 16d20cdee52a..972c03232a96 100644 >> --- a/hw/net/virtio-net.c >> +++ b/hw/net/virtio-net.c >> @@ -935,12 +935,23 @@ static void virtio_net_set_features(VirtIODevice *vdev, uint64_t features) >> memset(n->vlans, 0xff, MAX_VLAN >> 3); >> } >> >> - if (virtio_has_feature(features, VIRTIO_NET_F_STANDBY)) { >> - qapi_event_send_failover_negotiated(n->netclient_name); >> - qatomic_set(&n->failover_primary_hidden, false); >> - failover_add_primary(n, &err); >> - if (err) { >> - warn_report_err(err); >> + /* >> + * if the virtio-net driver has the STANDBY feature, we can plug the primary >> + * if not but is not the default failover device, >> + * we need to plug the primary alone and the virtio-net driver will >> + * be disabled in the validate_features() function but validate_features() >> + * is only available with virtio 1.0 spec >> + */ >> + if (n->failover) { >> + if (virtio_has_feature(features, VIRTIO_NET_F_STANDBY) || >> + (virtio_has_feature(features, VIRTIO_F_VERSION_1) && > > I think STANDY implies VERSION_1. > > And if we do this, it means it doesn't work for legacy drivers. > > Not sure if it's an issue. Yes, you're right. In case of a kernel driver that doesn't support STANDBY and that is not version 1, the virtio-net device is disabled (and the VFIO device is not plugged). Thanks, Laurent
On Mon, Aug 09, 2021 at 07:13:42PM +0200, Laurent Vivier wrote: > If the guest driver doesn't support the STANDBY feature, by default > we keep the virtio-net device and don't hotplug the VFIO device, > but in some cases, user can prefer to use the VFIO device rather > than the virtio-net one. We can't unplug the virtio-net device > (because on migration it is expected on the destination side) > but we can force the guest driver to be disabled. Then, we can > hotplug the VFIO device that will be unplugged before the migration > like in the normal failover migration but without the failover device. > > This patch adds a new property to virtio-net device: "failover-default". > > By default, "failover-default" is set to true and thus the default NIC > to use if the failover cannot be enabled is the virtio-net device > (this is what is done until now with the virtio-net failover). > > If "failover-default" is set to false, in case of error, the virtio-net > device is not the default anymore and the failover primary device > is used instead. > > If the STANDBY feature is supported by guest and host, the virtio-net > failover acts as usual. > > Signed-off-by: Laurent Vivier <lvivier@redhat.com> Three things I dislike here. First this is limited to 1.0. OTOH this is all about legacy guests without STANDBY, would be nicer to support legacy. Second: the reason we don't want both virtio and VFIO is because their mac addresses match. This tends to confuse guest tools. I don't see this solved here. Proposal: management supplies an extra dummy mac. This mac is used with virtio and its link it down. Link state reporting is also optional but it has been there for many years. If link state reporting is disabled then maybe do not expose VFIO after all. Third thing is option name. Does not hint at the fact that for legacy guests we do not get failover at all. Let's try to be more explicit please. > --- > include/hw/virtio/virtio-net.h | 1 + > hw/net/virtio-net.c | 49 +++++++++++++++++++++++++++++----- > 2 files changed, 44 insertions(+), 6 deletions(-) > > diff --git a/include/hw/virtio/virtio-net.h b/include/hw/virtio/virtio-net.h > index 824a69c23f06..ab77930a327e 100644 > --- a/include/hw/virtio/virtio-net.h > +++ b/include/hw/virtio/virtio-net.h > @@ -208,6 +208,7 @@ struct VirtIONet { > /* primary failover device is hidden*/ > bool failover_primary_hidden; > bool failover; > + bool failover_default; > DeviceListener primary_listener; > Notifier migration_state; > VirtioNetRssData rss_data; > diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c > index 16d20cdee52a..972c03232a96 100644 > --- a/hw/net/virtio-net.c > +++ b/hw/net/virtio-net.c > @@ -935,12 +935,23 @@ static void virtio_net_set_features(VirtIODevice *vdev, uint64_t features) > memset(n->vlans, 0xff, MAX_VLAN >> 3); > } > > - if (virtio_has_feature(features, VIRTIO_NET_F_STANDBY)) { > - qapi_event_send_failover_negotiated(n->netclient_name); > - qatomic_set(&n->failover_primary_hidden, false); > - failover_add_primary(n, &err); > - if (err) { > - warn_report_err(err); > + /* > + * if the virtio-net driver has the STANDBY feature, we can plug the primary > + * if not but is not the default failover device, > + * we need to plug the primary alone and the virtio-net driver will > + * be disabled in the validate_features() function but validate_features() > + * is only available with virtio 1.0 spec > + */ > + if (n->failover) { > + if (virtio_has_feature(features, VIRTIO_NET_F_STANDBY) || > + (virtio_has_feature(features, VIRTIO_F_VERSION_1) && > + !n->failover_default)) { > + qapi_event_send_failover_negotiated(n->netclient_name); > + qatomic_set(&n->failover_primary_hidden, false); > + failover_add_primary(n, &err); > + if (err) { > + warn_report_err(err); > + } > } > } > } > @@ -3625,9 +3636,34 @@ static Property virtio_net_properties[] = { > DEFINE_PROP_INT32("speed", VirtIONet, net_conf.speed, SPEED_UNKNOWN), > DEFINE_PROP_STRING("duplex", VirtIONet, net_conf.duplex_str), > DEFINE_PROP_BOOL("failover", VirtIONet, failover, false), > + DEFINE_PROP_BOOL("failover-default", VirtIONet, failover_default, true), > DEFINE_PROP_END_OF_LIST(), > }; > > +/* validate_features() is only available with VIRTIO_F_VERSION_1 */ > +static int failover_validate_features(VirtIODevice *vdev) > +{ > + VirtIONet *n = VIRTIO_NET(vdev); > + > + /* > + * If the guest driver doesn't support the STANDBY feature, by default > + * we keep the virtio-net device and don't hotplug the VFIO device, > + * but in some cases, user can prefer to use the VFIO device rather > + * than the virtio-net one. We can't unplug the virtio-net device > + * (because on migration it is expected on the destination side) > + * but we can force the guest driver to be disabled. In this case, We can > + * hotplug the VFIO device that will be unplugged before the migration > + * like in the normal failover migration but without the failover device. > + */ > + if (n->failover && !n->failover_default && > + !virtio_vdev_has_feature(vdev, VIRTIO_NET_F_STANDBY)) { > + /* disable virtio-net */ > + return -ENODEV; > + } > + > + return 0; > +} > + > static void virtio_net_class_init(ObjectClass *klass, void *data) > { > DeviceClass *dc = DEVICE_CLASS(klass); > @@ -3651,6 +3687,7 @@ static void virtio_net_class_init(ObjectClass *klass, void *data) > vdc->post_load = virtio_net_post_load_virtio; > vdc->vmsd = &vmstate_virtio_net_device; > vdc->primary_unplug_pending = primary_unplug_pending; > + vdc->validate_features = failover_validate_features; > } > > static const TypeInfo virtio_net_info = { > -- > 2.31.1
On 24/08/2021 01:25, Michael S. Tsirkin wrote: > On Mon, Aug 09, 2021 at 07:13:42PM +0200, Laurent Vivier wrote: >> If the guest driver doesn't support the STANDBY feature, by default >> we keep the virtio-net device and don't hotplug the VFIO device, >> but in some cases, user can prefer to use the VFIO device rather >> than the virtio-net one. We can't unplug the virtio-net device >> (because on migration it is expected on the destination side) >> but we can force the guest driver to be disabled. Then, we can >> hotplug the VFIO device that will be unplugged before the migration >> like in the normal failover migration but without the failover device. >> >> This patch adds a new property to virtio-net device: "failover-default". >> >> By default, "failover-default" is set to true and thus the default NIC >> to use if the failover cannot be enabled is the virtio-net device >> (this is what is done until now with the virtio-net failover). >> >> If "failover-default" is set to false, in case of error, the virtio-net >> device is not the default anymore and the failover primary device >> is used instead. >> >> If the STANDBY feature is supported by guest and host, the virtio-net >> failover acts as usual. >> >> Signed-off-by: Laurent Vivier <lvivier@redhat.com> > > Three things I dislike here. First this is limited to 1.0. > OTOH this is all about legacy guests without STANDBY, > would be nicer to support legacy. So for that we could use my first approach to disable the driver by triggering an error in the driver probe function. It was done in v1 by setting vring.num to 0. > Second: the reason we don't want both > virtio and VFIO is because their mac addresses match. > This tends to confuse guest tools. > I don't see this solved here. If the driver is not loaded I don't think any guest tool can read the MAC address of the virtio-net device. In fact what we want is to use VFIO device when failover is not available. I think keeping both can confuse the guest tools. > > Proposal: management supplies an extra dummy mac. > This mac is used with virtio and its link it down. > Link state reporting is also optional but > it has been there for many years. > If link state reporting is disabled then maybe do not > expose VFIO after all. The problem by keeping both interfaces (vfio and virtio-net) outside the failover configuration is the networking configuration (ifcfg) will be applied to the virtio-net device as it's PCI address is used to identify the failover_net interface. So the guest kernel will continue to configure and use the virtio-net device even if the vfio device is not hidden. Of course, we also need to define an ifcfg for the vfio device if failover is disabled. > Third thing is option name. Does not hint at the fact that > for legacy guests we do not get failover at all. > Let's try to be more explicit please. ok, but I think this is a minor problem we can discuss once the two previous ones are solved. I can also try to implement a POC with your proposition: a different MAC address and the link down state. Thanks, Laurent > > >> --- >> include/hw/virtio/virtio-net.h | 1 + >> hw/net/virtio-net.c | 49 +++++++++++++++++++++++++++++----- >> 2 files changed, 44 insertions(+), 6 deletions(-) >> >> diff --git a/include/hw/virtio/virtio-net.h b/include/hw/virtio/virtio-net.h >> index 824a69c23f06..ab77930a327e 100644 >> --- a/include/hw/virtio/virtio-net.h >> +++ b/include/hw/virtio/virtio-net.h >> @@ -208,6 +208,7 @@ struct VirtIONet { >> /* primary failover device is hidden*/ >> bool failover_primary_hidden; >> bool failover; >> + bool failover_default; >> DeviceListener primary_listener; >> Notifier migration_state; >> VirtioNetRssData rss_data; >> diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c >> index 16d20cdee52a..972c03232a96 100644 >> --- a/hw/net/virtio-net.c >> +++ b/hw/net/virtio-net.c >> @@ -935,12 +935,23 @@ static void virtio_net_set_features(VirtIODevice *vdev, uint64_t features) >> memset(n->vlans, 0xff, MAX_VLAN >> 3); >> } >> >> - if (virtio_has_feature(features, VIRTIO_NET_F_STANDBY)) { >> - qapi_event_send_failover_negotiated(n->netclient_name); >> - qatomic_set(&n->failover_primary_hidden, false); >> - failover_add_primary(n, &err); >> - if (err) { >> - warn_report_err(err); >> + /* >> + * if the virtio-net driver has the STANDBY feature, we can plug the primary >> + * if not but is not the default failover device, >> + * we need to plug the primary alone and the virtio-net driver will >> + * be disabled in the validate_features() function but validate_features() >> + * is only available with virtio 1.0 spec >> + */ >> + if (n->failover) { >> + if (virtio_has_feature(features, VIRTIO_NET_F_STANDBY) || >> + (virtio_has_feature(features, VIRTIO_F_VERSION_1) && >> + !n->failover_default)) { >> + qapi_event_send_failover_negotiated(n->netclient_name); >> + qatomic_set(&n->failover_primary_hidden, false); >> + failover_add_primary(n, &err); >> + if (err) { >> + warn_report_err(err); >> + } >> } >> } >> } >> @@ -3625,9 +3636,34 @@ static Property virtio_net_properties[] = { >> DEFINE_PROP_INT32("speed", VirtIONet, net_conf.speed, SPEED_UNKNOWN), >> DEFINE_PROP_STRING("duplex", VirtIONet, net_conf.duplex_str), >> DEFINE_PROP_BOOL("failover", VirtIONet, failover, false), >> + DEFINE_PROP_BOOL("failover-default", VirtIONet, failover_default, true), >> DEFINE_PROP_END_OF_LIST(), >> }; >> >> +/* validate_features() is only available with VIRTIO_F_VERSION_1 */ >> +static int failover_validate_features(VirtIODevice *vdev) >> +{ >> + VirtIONet *n = VIRTIO_NET(vdev); >> + >> + /* >> + * If the guest driver doesn't support the STANDBY feature, by default >> + * we keep the virtio-net device and don't hotplug the VFIO device, >> + * but in some cases, user can prefer to use the VFIO device rather >> + * than the virtio-net one. We can't unplug the virtio-net device >> + * (because on migration it is expected on the destination side) >> + * but we can force the guest driver to be disabled. In this case, We can >> + * hotplug the VFIO device that will be unplugged before the migration >> + * like in the normal failover migration but without the failover device. >> + */ >> + if (n->failover && !n->failover_default && >> + !virtio_vdev_has_feature(vdev, VIRTIO_NET_F_STANDBY)) { >> + /* disable virtio-net */ >> + return -ENODEV; >> + } >> + >> + return 0; >> +} >> + >> static void virtio_net_class_init(ObjectClass *klass, void *data) >> { >> DeviceClass *dc = DEVICE_CLASS(klass); >> @@ -3651,6 +3687,7 @@ static void virtio_net_class_init(ObjectClass *klass, void *data) >> vdc->post_load = virtio_net_post_load_virtio; >> vdc->vmsd = &vmstate_virtio_net_device; >> vdc->primary_unplug_pending = primary_unplug_pending; >> + vdc->validate_features = failover_validate_features; >> } >> >> static const TypeInfo virtio_net_info = { >> -- >> 2.31.1 >
diff --git a/include/hw/virtio/virtio-net.h b/include/hw/virtio/virtio-net.h index 824a69c23f06..ab77930a327e 100644 --- a/include/hw/virtio/virtio-net.h +++ b/include/hw/virtio/virtio-net.h @@ -208,6 +208,7 @@ struct VirtIONet { /* primary failover device is hidden*/ bool failover_primary_hidden; bool failover; + bool failover_default; DeviceListener primary_listener; Notifier migration_state; VirtioNetRssData rss_data; diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c index 16d20cdee52a..972c03232a96 100644 --- a/hw/net/virtio-net.c +++ b/hw/net/virtio-net.c @@ -935,12 +935,23 @@ static void virtio_net_set_features(VirtIODevice *vdev, uint64_t features) memset(n->vlans, 0xff, MAX_VLAN >> 3); } - if (virtio_has_feature(features, VIRTIO_NET_F_STANDBY)) { - qapi_event_send_failover_negotiated(n->netclient_name); - qatomic_set(&n->failover_primary_hidden, false); - failover_add_primary(n, &err); - if (err) { - warn_report_err(err); + /* + * if the virtio-net driver has the STANDBY feature, we can plug the primary + * if not but is not the default failover device, + * we need to plug the primary alone and the virtio-net driver will + * be disabled in the validate_features() function but validate_features() + * is only available with virtio 1.0 spec + */ + if (n->failover) { + if (virtio_has_feature(features, VIRTIO_NET_F_STANDBY) || + (virtio_has_feature(features, VIRTIO_F_VERSION_1) && + !n->failover_default)) { + qapi_event_send_failover_negotiated(n->netclient_name); + qatomic_set(&n->failover_primary_hidden, false); + failover_add_primary(n, &err); + if (err) { + warn_report_err(err); + } } } } @@ -3625,9 +3636,34 @@ static Property virtio_net_properties[] = { DEFINE_PROP_INT32("speed", VirtIONet, net_conf.speed, SPEED_UNKNOWN), DEFINE_PROP_STRING("duplex", VirtIONet, net_conf.duplex_str), DEFINE_PROP_BOOL("failover", VirtIONet, failover, false), + DEFINE_PROP_BOOL("failover-default", VirtIONet, failover_default, true), DEFINE_PROP_END_OF_LIST(), }; +/* validate_features() is only available with VIRTIO_F_VERSION_1 */ +static int failover_validate_features(VirtIODevice *vdev) +{ + VirtIONet *n = VIRTIO_NET(vdev); + + /* + * If the guest driver doesn't support the STANDBY feature, by default + * we keep the virtio-net device and don't hotplug the VFIO device, + * but in some cases, user can prefer to use the VFIO device rather + * than the virtio-net one. We can't unplug the virtio-net device + * (because on migration it is expected on the destination side) + * but we can force the guest driver to be disabled. In this case, We can + * hotplug the VFIO device that will be unplugged before the migration + * like in the normal failover migration but without the failover device. + */ + if (n->failover && !n->failover_default && + !virtio_vdev_has_feature(vdev, VIRTIO_NET_F_STANDBY)) { + /* disable virtio-net */ + return -ENODEV; + } + + return 0; +} + static void virtio_net_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -3651,6 +3687,7 @@ static void virtio_net_class_init(ObjectClass *klass, void *data) vdc->post_load = virtio_net_post_load_virtio; vdc->vmsd = &vmstate_virtio_net_device; vdc->primary_unplug_pending = primary_unplug_pending; + vdc->validate_features = failover_validate_features; } static const TypeInfo virtio_net_info = {
If the guest driver doesn't support the STANDBY feature, by default we keep the virtio-net device and don't hotplug the VFIO device, but in some cases, user can prefer to use the VFIO device rather than the virtio-net one. We can't unplug the virtio-net device (because on migration it is expected on the destination side) but we can force the guest driver to be disabled. Then, we can hotplug the VFIO device that will be unplugged before the migration like in the normal failover migration but without the failover device. This patch adds a new property to virtio-net device: "failover-default". By default, "failover-default" is set to true and thus the default NIC to use if the failover cannot be enabled is the virtio-net device (this is what is done until now with the virtio-net failover). If "failover-default" is set to false, in case of error, the virtio-net device is not the default anymore and the failover primary device is used instead. If the STANDBY feature is supported by guest and host, the virtio-net failover acts as usual. Signed-off-by: Laurent Vivier <lvivier@redhat.com> --- include/hw/virtio/virtio-net.h | 1 + hw/net/virtio-net.c | 49 +++++++++++++++++++++++++++++----- 2 files changed, 44 insertions(+), 6 deletions(-)