Message ID | 20210311210934.1935587-6-laurent@vivier.eu |
---|---|
State | New |
Headers | show |
Series | [PULL,1/9] target/m68k: implement rtr instruction | expand |
On Thu, 11 Mar 2021 at 21:22, Laurent Vivier <laurent@vivier.eu> wrote: > > Implement the goldfish tty device as defined in > > https://android.googlesource.com/platform/external/qemu/+/master/docs/GOLDFISH-VIRTUAL-HARDWARE.TXT > > and based on the kernel driver code: > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/tty/goldfish.c > > Signed-off-by: Laurent Vivier <laurent@vivier.eu> > Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> > Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> > Message-Id: <20210309195941.763896-2-laurent@vivier.eu> > Signed-off-by: Laurent Vivier <laurent@vivier.eu> I didn't notice this earlier, but this looks odd: > +static uint64_t goldfish_tty_read(void *opaque, hwaddr addr, > + unsigned size) > +{ > + GoldfishTTYState *s = opaque; > + uint64_t value = 0; > + > + switch (addr) { > + case REG_BYTES_READY: > + value = fifo8_num_used(&s->rx_fifo); > + break; > + case REG_VERSION: > + value = 0; You report as a version 0 Goldfish TTY device. This is the old kind that used guest virtual addresses, unlike the more sensible version 1 ("ranchu") kind that uses physical addresses. You can see this in the kernel driver code: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/tty/goldfish.c where it looks at qtty->version. > + case CMD_WRITE_BUFFER: > + len = s->data_len; > + ptr = s->data_ptr; > + while (len) { > + to_copy = MIN(GOLFISH_TTY_BUFFER_SIZE, len); > + > + address_space_rw(&address_space_memory, ptr, > + MEMTXATTRS_UNSPECIFIED, data_out, to_copy, 0); > + qemu_chr_fe_write_all(&s->chr, data_out, to_copy); > + > + len -= to_copy; > + ptr += to_copy; > + } > + break; > + case CMD_READ_BUFFER: > + len = s->data_len; > + ptr = s->data_ptr; > + while (len && !fifo8_is_empty(&s->rx_fifo)) { > + buf = (uint8_t *)fifo8_pop_buf(&s->rx_fifo, len, &to_copy); > + address_space_rw(&address_space_memory, ptr, > + MEMTXATTRS_UNSPECIFIED, buf, to_copy, 1); > + > + len -= to_copy; > + ptr += to_copy; > + } ...but here you're treating the data pointer value from the guest like a physical address. I'm not sure how this works. (This is one of the areas where you need to be really cautious about using the goldfish devices -- "device model gets virtual addresses from guest OS" is a really bad design.) thanks -- PMM
Le 11/03/2021 à 22:57, Peter Maydell a écrit : > On Thu, 11 Mar 2021 at 21:22, Laurent Vivier <laurent@vivier.eu> wrote: >> >> Implement the goldfish tty device as defined in >> >> https://android.googlesource.com/platform/external/qemu/+/master/docs/GOLDFISH-VIRTUAL-HARDWARE.TXT >> >> and based on the kernel driver code: >> >> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/tty/goldfish.c >> >> Signed-off-by: Laurent Vivier <laurent@vivier.eu> >> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> >> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> >> Message-Id: <20210309195941.763896-2-laurent@vivier.eu> >> Signed-off-by: Laurent Vivier <laurent@vivier.eu> > > I didn't notice this earlier, but this looks odd: > >> +static uint64_t goldfish_tty_read(void *opaque, hwaddr addr, >> + unsigned size) >> +{ >> + GoldfishTTYState *s = opaque; >> + uint64_t value = 0; >> + >> + switch (addr) { >> + case REG_BYTES_READY: >> + value = fifo8_num_used(&s->rx_fifo); >> + break; >> + case REG_VERSION: >> + value = 0; > > You report as a version 0 Goldfish TTY device. > This is the old kind that used guest virtual addresses, > unlike the more sensible version 1 ("ranchu") kind that uses > physical addresses. > > You can see this in the kernel driver code: > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/tty/goldfish.c > where it looks at qtty->version. > >> + case CMD_WRITE_BUFFER: >> + len = s->data_len; >> + ptr = s->data_ptr; >> + while (len) { >> + to_copy = MIN(GOLFISH_TTY_BUFFER_SIZE, len); >> + >> + address_space_rw(&address_space_memory, ptr, >> + MEMTXATTRS_UNSPECIFIED, data_out, to_copy, 0); >> + qemu_chr_fe_write_all(&s->chr, data_out, to_copy); >> + >> + len -= to_copy; >> + ptr += to_copy; >> + } >> + break; >> + case CMD_READ_BUFFER: >> + len = s->data_len; >> + ptr = s->data_ptr; >> + while (len && !fifo8_is_empty(&s->rx_fifo)) { >> + buf = (uint8_t *)fifo8_pop_buf(&s->rx_fifo, len, &to_copy); >> + address_space_rw(&address_space_memory, ptr, >> + MEMTXATTRS_UNSPECIFIED, buf, to_copy, 1); >> + >> + len -= to_copy; >> + ptr += to_copy; >> + } > > ...but here you're treating the data pointer value from the > guest like a physical address. I'm not sure how this works. > > (This is one of the areas where you need to be really cautious about > using the goldfish devices -- "device model gets virtual addresses from > guest OS" is a really bad design.) Thank you Peter. I will resend the pull request without the virt m68k machine part. Laurent
On 3/11/21 11:04 PM, Laurent Vivier wrote: > Le 11/03/2021 à 22:57, Peter Maydell a écrit : >> On Thu, 11 Mar 2021 at 21:22, Laurent Vivier <laurent@vivier.eu> wrote: >>> >>> Implement the goldfish tty device as defined in >>> >>> https://android.googlesource.com/platform/external/qemu/+/master/docs/GOLDFISH-VIRTUAL-HARDWARE.TXT >>> >>> and based on the kernel driver code: >>> >>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/tty/goldfish.c >>> >>> Signed-off-by: Laurent Vivier <laurent@vivier.eu> >>> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> >>> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> >>> Message-Id: <20210309195941.763896-2-laurent@vivier.eu> >>> Signed-off-by: Laurent Vivier <laurent@vivier.eu> >> >> I didn't notice this earlier, but this looks odd: >> >>> +static uint64_t goldfish_tty_read(void *opaque, hwaddr addr, >>> + unsigned size) >>> +{ >>> + GoldfishTTYState *s = opaque; >>> + uint64_t value = 0; >>> + >>> + switch (addr) { >>> + case REG_BYTES_READY: >>> + value = fifo8_num_used(&s->rx_fifo); >>> + break; >>> + case REG_VERSION: >>> + value = 0; >> >> You report as a version 0 Goldfish TTY device. >> This is the old kind that used guest virtual addresses, >> unlike the more sensible version 1 ("ranchu") kind that uses >> physical addresses. >> >> You can see this in the kernel driver code: >> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/tty/goldfish.c >> where it looks at qtty->version. >> >>> + case CMD_WRITE_BUFFER: >>> + len = s->data_len; >>> + ptr = s->data_ptr; >>> + while (len) { >>> + to_copy = MIN(GOLFISH_TTY_BUFFER_SIZE, len); >>> + >>> + address_space_rw(&address_space_memory, ptr, >>> + MEMTXATTRS_UNSPECIFIED, data_out, to_copy, 0); >>> + qemu_chr_fe_write_all(&s->chr, data_out, to_copy); >>> + >>> + len -= to_copy; >>> + ptr += to_copy; >>> + } >>> + break; >>> + case CMD_READ_BUFFER: >>> + len = s->data_len; >>> + ptr = s->data_ptr; >>> + while (len && !fifo8_is_empty(&s->rx_fifo)) { >>> + buf = (uint8_t *)fifo8_pop_buf(&s->rx_fifo, len, &to_copy); >>> + address_space_rw(&address_space_memory, ptr, >>> + MEMTXATTRS_UNSPECIFIED, buf, to_copy, 1); >>> + >>> + len -= to_copy; >>> + ptr += to_copy; >>> + } >> >> ...but here you're treating the data pointer value from the >> guest like a physical address. I'm not sure how this works. >> >> (This is one of the areas where you need to be really cautious about >> using the goldfish devices -- "device model gets virtual addresses from >> guest OS" is a really bad design.) > > Thank you Peter. > > I will resend the pull request without the virt m68k machine part. Laurent, if the issue Peter reported is only for the goldfish-tty, you might consider merging the m68k-virt with only virtio-serial console for 6.0...
Le 11/03/2021 à 23:34, Philippe Mathieu-Daudé a écrit : > On 3/11/21 11:04 PM, Laurent Vivier wrote: >> Le 11/03/2021 à 22:57, Peter Maydell a écrit : >>> On Thu, 11 Mar 2021 at 21:22, Laurent Vivier <laurent@vivier.eu> wrote: >>>> >>>> Implement the goldfish tty device as defined in >>>> >>>> https://android.googlesource.com/platform/external/qemu/+/master/docs/GOLDFISH-VIRTUAL-HARDWARE.TXT >>>> >>>> and based on the kernel driver code: >>>> >>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/tty/goldfish.c >>>> >>>> Signed-off-by: Laurent Vivier <laurent@vivier.eu> >>>> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> >>>> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> >>>> Message-Id: <20210309195941.763896-2-laurent@vivier.eu> >>>> Signed-off-by: Laurent Vivier <laurent@vivier.eu> >>> >>> I didn't notice this earlier, but this looks odd: >>> >>>> +static uint64_t goldfish_tty_read(void *opaque, hwaddr addr, >>>> + unsigned size) >>>> +{ >>>> + GoldfishTTYState *s = opaque; >>>> + uint64_t value = 0; >>>> + >>>> + switch (addr) { >>>> + case REG_BYTES_READY: >>>> + value = fifo8_num_used(&s->rx_fifo); >>>> + break; >>>> + case REG_VERSION: >>>> + value = 0; >>> >>> You report as a version 0 Goldfish TTY device. >>> This is the old kind that used guest virtual addresses, >>> unlike the more sensible version 1 ("ranchu") kind that uses >>> physical addresses. >>> >>> You can see this in the kernel driver code: >>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/tty/goldfish.c >>> where it looks at qtty->version. > > >>> >>>> + case CMD_WRITE_BUFFER: >>>> + len = s->data_len; >>>> + ptr = s->data_ptr; >>>> + while (len) { >>>> + to_copy = MIN(GOLFISH_TTY_BUFFER_SIZE, len); >>>> + >>>> + address_space_rw(&address_space_memory, ptr, >>>> + MEMTXATTRS_UNSPECIFIED, data_out, to_copy, 0); >>>> + qemu_chr_fe_write_all(&s->chr, data_out, to_copy); >>>> + >>>> + len -= to_copy; >>>> + ptr += to_copy; >>>> + } >>>> + break; >>>> + case CMD_READ_BUFFER: >>>> + len = s->data_len; >>>> + ptr = s->data_ptr; >>>> + while (len && !fifo8_is_empty(&s->rx_fifo)) { >>>> + buf = (uint8_t *)fifo8_pop_buf(&s->rx_fifo, len, &to_copy); >>>> + address_space_rw(&address_space_memory, ptr, >>>> + MEMTXATTRS_UNSPECIFIED, buf, to_copy, 1); >>>> + >>>> + len -= to_copy; >>>> + ptr += to_copy; >>>> + } >>> >>> ...but here you're treating the data pointer value from the >>> guest like a physical address. I'm not sure how this works. >>> >>> (This is one of the areas where you need to be really cautious about >>> using the goldfish devices -- "device model gets virtual addresses from >>> guest OS" is a really bad design.) >> >> Thank you Peter. >> >> I will resend the pull request without the virt m68k machine part. > > Laurent, if the issue Peter reported is only for the goldfish-tty, > you might consider merging the m68k-virt with only virtio-serial > console for 6.0... > It's a good idea, I will test if the machine is usable without it, and I will send a PR before the softfreeze. Thanks, Laurent
Nitpick, use 'hw/char' in the subject, as I mistakenly thought this was touching the char/ backend initially. On Thu, Mar 11, 2021 at 10:09:30PM +0100, Laurent Vivier wrote: > Implement the goldfish tty device as defined in > > https://android.googlesource.com/platform/external/qemu/+/master/docs/GOLDFISH-VIRTUAL-HARDWARE.TXT > > and based on the kernel driver code: > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/tty/goldfish.c > > Signed-off-by: Laurent Vivier <laurent@vivier.eu> > Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> > Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> > Message-Id: <20210309195941.763896-2-laurent@vivier.eu> > Signed-off-by: Laurent Vivier <laurent@vivier.eu> > --- > include/hw/char/goldfish_tty.h | 35 ++++ > hw/char/goldfish_tty.c | 283 +++++++++++++++++++++++++++++++++ > hw/char/Kconfig | 3 + > hw/char/meson.build | 2 + > hw/char/trace-events | 10 ++ > 5 files changed, 333 insertions(+) > create mode 100644 include/hw/char/goldfish_tty.h > create mode 100644 hw/char/goldfish_tty.c > > diff --git a/include/hw/char/goldfish_tty.h b/include/hw/char/goldfish_tty.h > new file mode 100644 > index 000000000000..b9dd67362a68 > --- /dev/null > +++ b/include/hw/char/goldfish_tty.h > @@ -0,0 +1,35 @@ > +/* > + * SPDX-License-Identifer: GPL-2.0-or-later > + * > + * Goldfish TTY > + * > + * (c) 2020 Laurent Vivier <laurent@vivier.eu> > + * > + */ > + > +#ifndef HW_CHAR_GOLDFISH_TTY_H > +#define HW_CHAR_GOLDFISH_TTY_H > + > +#include "qemu/fifo8.h" > +#include "chardev/char-fe.h" > + > +#define TYPE_GOLDFISH_TTY "goldfish_tty" > +OBJECT_DECLARE_SIMPLE_TYPE(GoldfishTTYState, GOLDFISH_TTY) > + > +#define GOLFISH_TTY_BUFFER_SIZE 128 > + > +struct GoldfishTTYState { > + SysBusDevice parent_obj; > + > + MemoryRegion iomem; > + qemu_irq irq; > + CharBackend chr; > + > + uint32_t data_len; > + uint64_t data_ptr; > + bool int_enabled; > + > + Fifo8 rx_fifo; > +}; > + > +#endif > diff --git a/hw/char/goldfish_tty.c b/hw/char/goldfish_tty.c > new file mode 100644 > index 000000000000..9f705f8653cc > --- /dev/null > +++ b/hw/char/goldfish_tty.c > @@ -0,0 +1,283 @@ > +/* > + * SPDX-License-Identifer: GPL-2.0-or-later > + * > + * Goldfish TTY > + * > + * (c) 2020 Laurent Vivier <laurent@vivier.eu> > + * > + */ > + > +#include "qemu/osdep.h" > +#include "hw/irq.h" > +#include "hw/qdev-properties-system.h" > +#include "hw/sysbus.h" > +#include "migration/vmstate.h" > +#include "chardev/char-fe.h" > +#include "qemu/log.h" > +#include "trace.h" > +#include "exec/address-spaces.h" > +#include "hw/char/goldfish_tty.h" > + > +/* registers */ > + > +enum { > + REG_PUT_CHAR = 0x00, > + REG_BYTES_READY = 0x04, > + REG_CMD = 0x08, > + REG_DATA_PTR = 0x10, > + REG_DATA_LEN = 0x14, > + REG_DATA_PTR_HIGH = 0x18, > + REG_VERSION = 0x20, > +}; > + > +/* commands */ > + > +enum { > + CMD_INT_DISABLE = 0x00, > + CMD_INT_ENABLE = 0x01, > + CMD_WRITE_BUFFER = 0x02, > + CMD_READ_BUFFER = 0x03, > +}; > + > +static uint64_t goldfish_tty_read(void *opaque, hwaddr addr, > + unsigned size) > +{ > + GoldfishTTYState *s = opaque; > + uint64_t value = 0; > + > + switch (addr) { > + case REG_BYTES_READY: > + value = fifo8_num_used(&s->rx_fifo); > + break; > + case REG_VERSION: > + value = 0; > + break; > + default: > + qemu_log_mask(LOG_UNIMP, > + "%s: unimplemented register read 0x%02"HWADDR_PRIx"\n", > + __func__, addr); > + break; > + } > + > + trace_goldfish_tty_read(s, addr, size, value); > + > + return value; > +} > + > +static void goldfish_tty_cmd(GoldfishTTYState *s, uint32_t cmd) > +{ > + uint32_t to_copy; > + uint8_t *buf; > + uint8_t data_out[GOLFISH_TTY_BUFFER_SIZE]; > + int len; > + uint64_t ptr; > + > + switch (cmd) { > + case CMD_INT_DISABLE: > + if (s->int_enabled) { > + if (!fifo8_is_empty(&s->rx_fifo)) { > + qemu_set_irq(s->irq, 0); > + } > + s->int_enabled = false; > + } > + break; > + case CMD_INT_ENABLE: > + if (!s->int_enabled) { > + if (!fifo8_is_empty(&s->rx_fifo)) { > + qemu_set_irq(s->irq, 1); > + } > + s->int_enabled = true; > + } > + break; > + case CMD_WRITE_BUFFER: > + len = s->data_len; > + ptr = s->data_ptr; > + while (len) { > + to_copy = MIN(GOLFISH_TTY_BUFFER_SIZE, len); > + > + address_space_rw(&address_space_memory, ptr, > + MEMTXATTRS_UNSPECIFIED, data_out, to_copy, 0); > + qemu_chr_fe_write_all(&s->chr, data_out, to_copy); > + > + len -= to_copy; > + ptr += to_copy; > + } > + break; > + case CMD_READ_BUFFER: > + len = s->data_len; > + ptr = s->data_ptr; > + while (len && !fifo8_is_empty(&s->rx_fifo)) { > + buf = (uint8_t *)fifo8_pop_buf(&s->rx_fifo, len, &to_copy); > + address_space_rw(&address_space_memory, ptr, > + MEMTXATTRS_UNSPECIFIED, buf, to_copy, 1); > + > + len -= to_copy; > + ptr += to_copy; > + } > + if (s->int_enabled && fifo8_is_empty(&s->rx_fifo)) { > + qemu_set_irq(s->irq, 0); > + } > + break; > + } > +} > + > +static void goldfish_tty_write(void *opaque, hwaddr addr, > + uint64_t value, unsigned size) > +{ > + GoldfishTTYState *s = opaque; > + unsigned char c; > + > + trace_goldfish_tty_write(s, addr, size, value); > + > + switch (addr) { > + case REG_PUT_CHAR: > + c = value; > + qemu_chr_fe_write_all(&s->chr, &c, sizeof(c)); > + break; > + case REG_CMD: > + goldfish_tty_cmd(s, value); > + break; > + case REG_DATA_PTR: > + s->data_ptr = value; > + break; > + case REG_DATA_PTR_HIGH: > + s->data_ptr = deposit64(s->data_ptr, 32, 32, value); > + break; > + case REG_DATA_LEN: > + s->data_len = value; > + break; > + default: > + qemu_log_mask(LOG_UNIMP, > + "%s: unimplemented register write 0x%02"HWADDR_PRIx"\n", > + __func__, addr); > + break; > + } > +} > + > +static const MemoryRegionOps goldfish_tty_ops = { > + .read = goldfish_tty_read, > + .write = goldfish_tty_write, > + .endianness = DEVICE_NATIVE_ENDIAN, > + .valid.max_access_size = 4, > + .impl.max_access_size = 4, > + .impl.min_access_size = 4, > +}; > + > +static int goldfish_tty_can_receive(void *opaque) > +{ > + GoldfishTTYState *s = opaque; > + int available = fifo8_num_free(&s->rx_fifo); > + > + trace_goldfish_tty_can_receive(s, available); > + > + return available; > +} > + > +static void goldfish_tty_receive(void *opaque, const uint8_t *buffer, int size) > +{ > + GoldfishTTYState *s = opaque; > + > + trace_goldfish_tty_receive(s, size); > + > + g_assert(size <= fifo8_num_free(&s->rx_fifo)); > + > + fifo8_push_all(&s->rx_fifo, buffer, size); > + > + if (s->int_enabled && !fifo8_is_empty(&s->rx_fifo)) { > + qemu_set_irq(s->irq, 1); > + } > +} > + > +static void goldfish_tty_reset(DeviceState *dev) > +{ > + GoldfishTTYState *s = GOLDFISH_TTY(dev); > + > + trace_goldfish_tty_reset(s); > + > + fifo8_reset(&s->rx_fifo); > + s->int_enabled = false; > + s->data_ptr = 0; > + s->data_len = 0; > +} > + > +static void goldfish_tty_realize(DeviceState *dev, Error **errp) > +{ > + GoldfishTTYState *s = GOLDFISH_TTY(dev); > + > + trace_goldfish_tty_realize(s); > + > + fifo8_create(&s->rx_fifo, GOLFISH_TTY_BUFFER_SIZE); > + memory_region_init_io(&s->iomem, OBJECT(s), &goldfish_tty_ops, s, > + "goldfish_tty", 0x24); > + > + if (qemu_chr_fe_backend_connected(&s->chr)) { > + qemu_chr_fe_set_handlers(&s->chr, goldfish_tty_can_receive, > + goldfish_tty_receive, NULL, NULL, > + s, NULL, true); > + } > +} > + > +static void goldfish_tty_unrealize(DeviceState *dev) > +{ > + GoldfishTTYState *s = GOLDFISH_TTY(dev); > + > + trace_goldfish_tty_unrealize(s); > + > + fifo8_destroy(&s->rx_fifo); > +} > + > +static const VMStateDescription vmstate_goldfish_tty = { > + .name = "goldfish_tty", > + .version_id = 1, > + .minimum_version_id = 1, > + .fields = (VMStateField[]) { > + VMSTATE_UINT32(data_len, GoldfishTTYState), > + VMSTATE_UINT64(data_ptr, GoldfishTTYState), > + VMSTATE_BOOL(int_enabled, GoldfishTTYState), > + VMSTATE_FIFO8(rx_fifo, GoldfishTTYState), > + VMSTATE_END_OF_LIST() > + } > +}; > + > +static Property goldfish_tty_properties[] = { > + DEFINE_PROP_CHR("chardev", GoldfishTTYState, chr), > + DEFINE_PROP_END_OF_LIST(), > +}; > + > +static void goldfish_tty_instance_init(Object *obj) > +{ > + SysBusDevice *dev = SYS_BUS_DEVICE(obj); > + GoldfishTTYState *s = GOLDFISH_TTY(obj); > + > + trace_goldfish_tty_instance_init(s); > + > + sysbus_init_mmio(dev, &s->iomem); > + sysbus_init_irq(dev, &s->irq); > +} > + > +static void goldfish_tty_class_init(ObjectClass *oc, void *data) > +{ > + DeviceClass *dc = DEVICE_CLASS(oc); > + > + device_class_set_props(dc, goldfish_tty_properties); > + dc->reset = goldfish_tty_reset; > + dc->realize = goldfish_tty_realize; > + dc->unrealize = goldfish_tty_unrealize; > + dc->vmsd = &vmstate_goldfish_tty; > + set_bit(DEVICE_CATEGORY_INPUT, dc->categories); > +} > + > +static const TypeInfo goldfish_tty_info = { > + .name = TYPE_GOLDFISH_TTY, > + .parent = TYPE_SYS_BUS_DEVICE, > + .class_init = goldfish_tty_class_init, > + .instance_init = goldfish_tty_instance_init, > + .instance_size = sizeof(GoldfishTTYState), > +}; > + > +static void goldfish_tty_register_types(void) > +{ > + type_register_static(&goldfish_tty_info); > +} > + > +type_init(goldfish_tty_register_types) > diff --git a/hw/char/Kconfig b/hw/char/Kconfig > index f6f4fffd1b7c..4cf36ac637ba 100644 > --- a/hw/char/Kconfig > +++ b/hw/char/Kconfig > @@ -64,3 +64,6 @@ config MCHP_PFSOC_MMUART > > config SIFIVE_UART > bool > + > +config GOLDFISH_TTY > + bool > diff --git a/hw/char/meson.build b/hw/char/meson.build > index afe9a0af88c1..6f5c3e5b5bfa 100644 > --- a/hw/char/meson.build > +++ b/hw/char/meson.build > @@ -39,3 +39,5 @@ specific_ss.add(when: 'CONFIG_HTIF', if_true: files('riscv_htif.c')) > specific_ss.add(when: 'CONFIG_TERMINAL3270', if_true: files('terminal3270.c')) > specific_ss.add(when: 'CONFIG_VIRTIO', if_true: files('virtio-serial-bus.c')) > specific_ss.add(when: 'CONFIG_PSERIES', if_true: files('spapr_vty.c')) > + > +specific_ss.add(when: 'CONFIG_GOLDFISH_TTY', if_true: files('goldfish_tty.c')) > diff --git a/hw/char/trace-events b/hw/char/trace-events > index 81026f661277..76d52938ead3 100644 > --- a/hw/char/trace-events > +++ b/hw/char/trace-events > @@ -20,6 +20,16 @@ virtio_console_flush_buf(unsigned int port, size_t len, ssize_t ret) "port %u, i > virtio_console_chr_read(unsigned int port, int size) "port %u, size %d" > virtio_console_chr_event(unsigned int port, int event) "port %u, event %d" > > +# goldfish_tty.c > +goldfish_tty_read(void *dev, unsigned int addr, unsigned int size, uint64_t value) "tty: %p reg: 0x%02x size: %d value: 0x%"PRIx64 > +goldfish_tty_write(void *dev, unsigned int addr, unsigned int size, uint64_t value) "tty: %p reg: 0x%02x size: %d value: 0x%"PRIx64 > +goldfish_tty_can_receive(void *dev, unsigned int available) "tty: %p available: %u" > +goldfish_tty_receive(void *dev, unsigned int size) "tty: %p size: %u" > +goldfish_tty_reset(void *dev) "tty: %p" > +goldfish_tty_realize(void *dev) "tty: %p" > +goldfish_tty_unrealize(void *dev) "tty: %p" > +goldfish_tty_instance_init(void *dev) "tty: %p" > + > # grlib_apbuart.c > grlib_apbuart_event(int event) "event:%d" > grlib_apbuart_writel_unknown(uint64_t addr, uint32_t value) "addr 0x%"PRIx64" value 0x%x" > -- > 2.29.2 > > Regards, Daniel
Le 15/03/2021 à 12:35, Daniel P. Berrangé a écrit : > Nitpick, use 'hw/char' in the subject, as I mistakenly thought > this was touching the char/ backend initially. > I sent a v8 without changing the subject (after this PR but before your comment), but if there is no v9 I will update it in the pull request. Thanks, Laurent
diff --git a/include/hw/char/goldfish_tty.h b/include/hw/char/goldfish_tty.h new file mode 100644 index 000000000000..b9dd67362a68 --- /dev/null +++ b/include/hw/char/goldfish_tty.h @@ -0,0 +1,35 @@ +/* + * SPDX-License-Identifer: GPL-2.0-or-later + * + * Goldfish TTY + * + * (c) 2020 Laurent Vivier <laurent@vivier.eu> + * + */ + +#ifndef HW_CHAR_GOLDFISH_TTY_H +#define HW_CHAR_GOLDFISH_TTY_H + +#include "qemu/fifo8.h" +#include "chardev/char-fe.h" + +#define TYPE_GOLDFISH_TTY "goldfish_tty" +OBJECT_DECLARE_SIMPLE_TYPE(GoldfishTTYState, GOLDFISH_TTY) + +#define GOLFISH_TTY_BUFFER_SIZE 128 + +struct GoldfishTTYState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + qemu_irq irq; + CharBackend chr; + + uint32_t data_len; + uint64_t data_ptr; + bool int_enabled; + + Fifo8 rx_fifo; +}; + +#endif diff --git a/hw/char/goldfish_tty.c b/hw/char/goldfish_tty.c new file mode 100644 index 000000000000..9f705f8653cc --- /dev/null +++ b/hw/char/goldfish_tty.c @@ -0,0 +1,283 @@ +/* + * SPDX-License-Identifer: GPL-2.0-or-later + * + * Goldfish TTY + * + * (c) 2020 Laurent Vivier <laurent@vivier.eu> + * + */ + +#include "qemu/osdep.h" +#include "hw/irq.h" +#include "hw/qdev-properties-system.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "chardev/char-fe.h" +#include "qemu/log.h" +#include "trace.h" +#include "exec/address-spaces.h" +#include "hw/char/goldfish_tty.h" + +/* registers */ + +enum { + REG_PUT_CHAR = 0x00, + REG_BYTES_READY = 0x04, + REG_CMD = 0x08, + REG_DATA_PTR = 0x10, + REG_DATA_LEN = 0x14, + REG_DATA_PTR_HIGH = 0x18, + REG_VERSION = 0x20, +}; + +/* commands */ + +enum { + CMD_INT_DISABLE = 0x00, + CMD_INT_ENABLE = 0x01, + CMD_WRITE_BUFFER = 0x02, + CMD_READ_BUFFER = 0x03, +}; + +static uint64_t goldfish_tty_read(void *opaque, hwaddr addr, + unsigned size) +{ + GoldfishTTYState *s = opaque; + uint64_t value = 0; + + switch (addr) { + case REG_BYTES_READY: + value = fifo8_num_used(&s->rx_fifo); + break; + case REG_VERSION: + value = 0; + break; + default: + qemu_log_mask(LOG_UNIMP, + "%s: unimplemented register read 0x%02"HWADDR_PRIx"\n", + __func__, addr); + break; + } + + trace_goldfish_tty_read(s, addr, size, value); + + return value; +} + +static void goldfish_tty_cmd(GoldfishTTYState *s, uint32_t cmd) +{ + uint32_t to_copy; + uint8_t *buf; + uint8_t data_out[GOLFISH_TTY_BUFFER_SIZE]; + int len; + uint64_t ptr; + + switch (cmd) { + case CMD_INT_DISABLE: + if (s->int_enabled) { + if (!fifo8_is_empty(&s->rx_fifo)) { + qemu_set_irq(s->irq, 0); + } + s->int_enabled = false; + } + break; + case CMD_INT_ENABLE: + if (!s->int_enabled) { + if (!fifo8_is_empty(&s->rx_fifo)) { + qemu_set_irq(s->irq, 1); + } + s->int_enabled = true; + } + break; + case CMD_WRITE_BUFFER: + len = s->data_len; + ptr = s->data_ptr; + while (len) { + to_copy = MIN(GOLFISH_TTY_BUFFER_SIZE, len); + + address_space_rw(&address_space_memory, ptr, + MEMTXATTRS_UNSPECIFIED, data_out, to_copy, 0); + qemu_chr_fe_write_all(&s->chr, data_out, to_copy); + + len -= to_copy; + ptr += to_copy; + } + break; + case CMD_READ_BUFFER: + len = s->data_len; + ptr = s->data_ptr; + while (len && !fifo8_is_empty(&s->rx_fifo)) { + buf = (uint8_t *)fifo8_pop_buf(&s->rx_fifo, len, &to_copy); + address_space_rw(&address_space_memory, ptr, + MEMTXATTRS_UNSPECIFIED, buf, to_copy, 1); + + len -= to_copy; + ptr += to_copy; + } + if (s->int_enabled && fifo8_is_empty(&s->rx_fifo)) { + qemu_set_irq(s->irq, 0); + } + break; + } +} + +static void goldfish_tty_write(void *opaque, hwaddr addr, + uint64_t value, unsigned size) +{ + GoldfishTTYState *s = opaque; + unsigned char c; + + trace_goldfish_tty_write(s, addr, size, value); + + switch (addr) { + case REG_PUT_CHAR: + c = value; + qemu_chr_fe_write_all(&s->chr, &c, sizeof(c)); + break; + case REG_CMD: + goldfish_tty_cmd(s, value); + break; + case REG_DATA_PTR: + s->data_ptr = value; + break; + case REG_DATA_PTR_HIGH: + s->data_ptr = deposit64(s->data_ptr, 32, 32, value); + break; + case REG_DATA_LEN: + s->data_len = value; + break; + default: + qemu_log_mask(LOG_UNIMP, + "%s: unimplemented register write 0x%02"HWADDR_PRIx"\n", + __func__, addr); + break; + } +} + +static const MemoryRegionOps goldfish_tty_ops = { + .read = goldfish_tty_read, + .write = goldfish_tty_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid.max_access_size = 4, + .impl.max_access_size = 4, + .impl.min_access_size = 4, +}; + +static int goldfish_tty_can_receive(void *opaque) +{ + GoldfishTTYState *s = opaque; + int available = fifo8_num_free(&s->rx_fifo); + + trace_goldfish_tty_can_receive(s, available); + + return available; +} + +static void goldfish_tty_receive(void *opaque, const uint8_t *buffer, int size) +{ + GoldfishTTYState *s = opaque; + + trace_goldfish_tty_receive(s, size); + + g_assert(size <= fifo8_num_free(&s->rx_fifo)); + + fifo8_push_all(&s->rx_fifo, buffer, size); + + if (s->int_enabled && !fifo8_is_empty(&s->rx_fifo)) { + qemu_set_irq(s->irq, 1); + } +} + +static void goldfish_tty_reset(DeviceState *dev) +{ + GoldfishTTYState *s = GOLDFISH_TTY(dev); + + trace_goldfish_tty_reset(s); + + fifo8_reset(&s->rx_fifo); + s->int_enabled = false; + s->data_ptr = 0; + s->data_len = 0; +} + +static void goldfish_tty_realize(DeviceState *dev, Error **errp) +{ + GoldfishTTYState *s = GOLDFISH_TTY(dev); + + trace_goldfish_tty_realize(s); + + fifo8_create(&s->rx_fifo, GOLFISH_TTY_BUFFER_SIZE); + memory_region_init_io(&s->iomem, OBJECT(s), &goldfish_tty_ops, s, + "goldfish_tty", 0x24); + + if (qemu_chr_fe_backend_connected(&s->chr)) { + qemu_chr_fe_set_handlers(&s->chr, goldfish_tty_can_receive, + goldfish_tty_receive, NULL, NULL, + s, NULL, true); + } +} + +static void goldfish_tty_unrealize(DeviceState *dev) +{ + GoldfishTTYState *s = GOLDFISH_TTY(dev); + + trace_goldfish_tty_unrealize(s); + + fifo8_destroy(&s->rx_fifo); +} + +static const VMStateDescription vmstate_goldfish_tty = { + .name = "goldfish_tty", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(data_len, GoldfishTTYState), + VMSTATE_UINT64(data_ptr, GoldfishTTYState), + VMSTATE_BOOL(int_enabled, GoldfishTTYState), + VMSTATE_FIFO8(rx_fifo, GoldfishTTYState), + VMSTATE_END_OF_LIST() + } +}; + +static Property goldfish_tty_properties[] = { + DEFINE_PROP_CHR("chardev", GoldfishTTYState, chr), + DEFINE_PROP_END_OF_LIST(), +}; + +static void goldfish_tty_instance_init(Object *obj) +{ + SysBusDevice *dev = SYS_BUS_DEVICE(obj); + GoldfishTTYState *s = GOLDFISH_TTY(obj); + + trace_goldfish_tty_instance_init(s); + + sysbus_init_mmio(dev, &s->iomem); + sysbus_init_irq(dev, &s->irq); +} + +static void goldfish_tty_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + + device_class_set_props(dc, goldfish_tty_properties); + dc->reset = goldfish_tty_reset; + dc->realize = goldfish_tty_realize; + dc->unrealize = goldfish_tty_unrealize; + dc->vmsd = &vmstate_goldfish_tty; + set_bit(DEVICE_CATEGORY_INPUT, dc->categories); +} + +static const TypeInfo goldfish_tty_info = { + .name = TYPE_GOLDFISH_TTY, + .parent = TYPE_SYS_BUS_DEVICE, + .class_init = goldfish_tty_class_init, + .instance_init = goldfish_tty_instance_init, + .instance_size = sizeof(GoldfishTTYState), +}; + +static void goldfish_tty_register_types(void) +{ + type_register_static(&goldfish_tty_info); +} + +type_init(goldfish_tty_register_types) diff --git a/hw/char/Kconfig b/hw/char/Kconfig index f6f4fffd1b7c..4cf36ac637ba 100644 --- a/hw/char/Kconfig +++ b/hw/char/Kconfig @@ -64,3 +64,6 @@ config MCHP_PFSOC_MMUART config SIFIVE_UART bool + +config GOLDFISH_TTY + bool diff --git a/hw/char/meson.build b/hw/char/meson.build index afe9a0af88c1..6f5c3e5b5bfa 100644 --- a/hw/char/meson.build +++ b/hw/char/meson.build @@ -39,3 +39,5 @@ specific_ss.add(when: 'CONFIG_HTIF', if_true: files('riscv_htif.c')) specific_ss.add(when: 'CONFIG_TERMINAL3270', if_true: files('terminal3270.c')) specific_ss.add(when: 'CONFIG_VIRTIO', if_true: files('virtio-serial-bus.c')) specific_ss.add(when: 'CONFIG_PSERIES', if_true: files('spapr_vty.c')) + +specific_ss.add(when: 'CONFIG_GOLDFISH_TTY', if_true: files('goldfish_tty.c')) diff --git a/hw/char/trace-events b/hw/char/trace-events index 81026f661277..76d52938ead3 100644 --- a/hw/char/trace-events +++ b/hw/char/trace-events @@ -20,6 +20,16 @@ virtio_console_flush_buf(unsigned int port, size_t len, ssize_t ret) "port %u, i virtio_console_chr_read(unsigned int port, int size) "port %u, size %d" virtio_console_chr_event(unsigned int port, int event) "port %u, event %d" +# goldfish_tty.c +goldfish_tty_read(void *dev, unsigned int addr, unsigned int size, uint64_t value) "tty: %p reg: 0x%02x size: %d value: 0x%"PRIx64 +goldfish_tty_write(void *dev, unsigned int addr, unsigned int size, uint64_t value) "tty: %p reg: 0x%02x size: %d value: 0x%"PRIx64 +goldfish_tty_can_receive(void *dev, unsigned int available) "tty: %p available: %u" +goldfish_tty_receive(void *dev, unsigned int size) "tty: %p size: %u" +goldfish_tty_reset(void *dev) "tty: %p" +goldfish_tty_realize(void *dev) "tty: %p" +goldfish_tty_unrealize(void *dev) "tty: %p" +goldfish_tty_instance_init(void *dev) "tty: %p" + # grlib_apbuart.c grlib_apbuart_event(int event) "event:%d" grlib_apbuart_writel_unknown(uint64_t addr, uint32_t value) "addr 0x%"PRIx64" value 0x%x"