Message ID | 20210130030430.11369-1-cmr@codefail.de (mailing list archive) |
---|---|
State | Changes Requested |
Headers | show |
Series | powerpc64/idle: Fix SP offsets when saving GPRs | expand |
Context | Check | Description |
---|---|---|
snowpatch_ozlabs/apply_patch | success | Successfully applied on branch powerpc/merge (44158b256b30415079588d0fcb1bccbdc2ccd009) |
snowpatch_ozlabs/build-ppc64le | success | Build succeeded |
snowpatch_ozlabs/build-ppc64be | success | Build succeeded |
snowpatch_ozlabs/build-ppc64e | success | Build succeeded |
snowpatch_ozlabs/build-pmac32 | success | Build succeeded |
snowpatch_ozlabs/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 150 lines checked |
snowpatch_ozlabs/needsstable | success | Patch has no Fixes tags |
"Christopher M. Riedl" <cmr@codefail.de> writes: > The idle entry/exit code saves/restores GPRs in the stack "red zone" > (Protected Zone according to PowerPC64 ELF ABI v2). However, the offset > used for the first GPR is incorrect and overwrites the back chain - the > Protected Zone actually starts below the current SP. In practice this is > probably not an issue, but it's still incorrect so fix it. Nice catch. Corrupting the back chain means you can't backtrace from there, which could be confusing for debugging one day. It does make me wonder why we don't just create a stack frame and use the normal macros? It would use a bit more stack space, but we shouldn't be short of stack space when going idle. Nick, was there a particular reason for using the red zone? cheers > diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S > index 22f249b6f58d..80cf35183e9d 100644 > --- a/arch/powerpc/kernel/idle_book3s.S > +++ b/arch/powerpc/kernel/idle_book3s.S > @@ -53,27 +53,27 @@ _GLOBAL(isa300_idle_stop_mayloss) > mflr r4 > mfcr r5 > /* use stack red zone rather than a new frame for saving regs */ > - std r2,-8*0(r1) > - std r14,-8*1(r1) > - std r15,-8*2(r1) > - std r16,-8*3(r1) > - std r17,-8*4(r1) > - std r18,-8*5(r1) > - std r19,-8*6(r1) > - std r20,-8*7(r1) > - std r21,-8*8(r1) > - std r22,-8*9(r1) > - std r23,-8*10(r1) > - std r24,-8*11(r1) > - std r25,-8*12(r1) > - std r26,-8*13(r1) > - std r27,-8*14(r1) > - std r28,-8*15(r1) > - std r29,-8*16(r1) > - std r30,-8*17(r1) > - std r31,-8*18(r1) > - std r4,-8*19(r1) > - std r5,-8*20(r1) > + std r2,-8*1(r1) > + std r14,-8*2(r1) > + std r15,-8*3(r1) > + std r16,-8*4(r1) > + std r17,-8*5(r1) > + std r18,-8*6(r1) > + std r19,-8*7(r1) > + std r20,-8*8(r1) > + std r21,-8*9(r1) > + std r22,-8*10(r1) > + std r23,-8*11(r1) > + std r24,-8*12(r1) > + std r25,-8*13(r1) > + std r26,-8*14(r1) > + std r27,-8*15(r1) > + std r28,-8*16(r1) > + std r29,-8*17(r1) > + std r30,-8*18(r1) > + std r31,-8*19(r1) > + std r4,-8*20(r1) > + std r5,-8*21(r1) > /* 168 bytes */ > PPC_STOP > b . /* catch bugs */ > @@ -89,8 +89,8 @@ _GLOBAL(isa300_idle_stop_mayloss) > */ > _GLOBAL(idle_return_gpr_loss) > ld r1,PACAR1(r13) > - ld r4,-8*19(r1) > - ld r5,-8*20(r1) > + ld r4,-8*20(r1) > + ld r5,-8*21(r1) > mtlr r4 > mtcr r5 > /* > @@ -98,25 +98,25 @@ _GLOBAL(idle_return_gpr_loss) > * from PACATOC. This could be avoided for that less common case > * if KVM saved its r2. > */ > - ld r2,-8*0(r1) > - ld r14,-8*1(r1) > - ld r15,-8*2(r1) > - ld r16,-8*3(r1) > - ld r17,-8*4(r1) > - ld r18,-8*5(r1) > - ld r19,-8*6(r1) > - ld r20,-8*7(r1) > - ld r21,-8*8(r1) > - ld r22,-8*9(r1) > - ld r23,-8*10(r1) > - ld r24,-8*11(r1) > - ld r25,-8*12(r1) > - ld r26,-8*13(r1) > - ld r27,-8*14(r1) > - ld r28,-8*15(r1) > - ld r29,-8*16(r1) > - ld r30,-8*17(r1) > - ld r31,-8*18(r1) > + ld r2,-8*1(r1) > + ld r14,-8*2(r1) > + ld r15,-8*3(r1) > + ld r16,-8*4(r1) > + ld r17,-8*5(r1) > + ld r18,-8*6(r1) > + ld r19,-8*7(r1) > + ld r20,-8*8(r1) > + ld r21,-8*9(r1) > + ld r22,-8*10(r1) > + ld r23,-8*11(r1) > + ld r24,-8*12(r1) > + ld r25,-8*13(r1) > + ld r26,-8*14(r1) > + ld r27,-8*15(r1) > + ld r28,-8*16(r1) > + ld r29,-8*17(r1) > + ld r30,-8*18(r1) > + ld r31,-8*19(r1) > blr > > /* > @@ -155,27 +155,27 @@ _GLOBAL(isa206_idle_insn_mayloss) > mflr r4 > mfcr r5 > /* use stack red zone rather than a new frame for saving regs */ > - std r2,-8*0(r1) > - std r14,-8*1(r1) > - std r15,-8*2(r1) > - std r16,-8*3(r1) > - std r17,-8*4(r1) > - std r18,-8*5(r1) > - std r19,-8*6(r1) > - std r20,-8*7(r1) > - std r21,-8*8(r1) > - std r22,-8*9(r1) > - std r23,-8*10(r1) > - std r24,-8*11(r1) > - std r25,-8*12(r1) > - std r26,-8*13(r1) > - std r27,-8*14(r1) > - std r28,-8*15(r1) > - std r29,-8*16(r1) > - std r30,-8*17(r1) > - std r31,-8*18(r1) > - std r4,-8*19(r1) > - std r5,-8*20(r1) > + std r2,-8*1(r1) > + std r14,-8*2(r1) > + std r15,-8*3(r1) > + std r16,-8*4(r1) > + std r17,-8*5(r1) > + std r18,-8*6(r1) > + std r19,-8*7(r1) > + std r20,-8*8(r1) > + std r21,-8*9(r1) > + std r22,-8*10(r1) > + std r23,-8*11(r1) > + std r24,-8*12(r1) > + std r25,-8*13(r1) > + std r26,-8*14(r1) > + std r27,-8*15(r1) > + std r28,-8*16(r1) > + std r29,-8*17(r1) > + std r30,-8*18(r1) > + std r31,-8*19(r1) > + std r4,-8*20(r1) > + std r5,-8*21(r1) > cmpwi r3,PNV_THREAD_NAP > bne 1f > IDLE_STATE_ENTER_SEQ_NORET(PPC_NAP) > -- > 2.26.1
Excerpts from Michael Ellerman's message of January 30, 2021 9:32 pm: > "Christopher M. Riedl" <cmr@codefail.de> writes: >> The idle entry/exit code saves/restores GPRs in the stack "red zone" >> (Protected Zone according to PowerPC64 ELF ABI v2). However, the offset >> used for the first GPR is incorrect and overwrites the back chain - the >> Protected Zone actually starts below the current SP. In practice this is >> probably not an issue, but it's still incorrect so fix it. > > Nice catch. > > Corrupting the back chain means you can't backtrace from there, which > could be confusing for debugging one day. Yeah, we seem to have got away without noticing because the CPU will wake up and return out of here before it tries to unwind the stack, but if you tried to walk it by hand if the CPU got stuck in idle or something, then we'd get confused. > It does make me wonder why we don't just create a stack frame and use > the normal macros? It would use a bit more stack space, but we shouldn't > be short of stack space when going idle. > > Nick, was there a particular reason for using the red zone? I don't recall a particular reason, I think a normal stack frame is probably a good idea. Thanks, Nick
On Sat Jan 30, 2021 at 7:44 AM CST, Nicholas Piggin wrote: > Excerpts from Michael Ellerman's message of January 30, 2021 9:32 pm: > > "Christopher M. Riedl" <cmr@codefail.de> writes: > >> The idle entry/exit code saves/restores GPRs in the stack "red zone" > >> (Protected Zone according to PowerPC64 ELF ABI v2). However, the offset > >> used for the first GPR is incorrect and overwrites the back chain - the > >> Protected Zone actually starts below the current SP. In practice this is > >> probably not an issue, but it's still incorrect so fix it. > > > > Nice catch. > > > > Corrupting the back chain means you can't backtrace from there, which > > could be confusing for debugging one day. > > Yeah, we seem to have got away without noticing because the CPU will > wake up and return out of here before it tries to unwind the stack, > but if you tried to walk it by hand if the CPU got stuck in idle or > something, then we'd get confused. > > > It does make me wonder why we don't just create a stack frame and use > > the normal macros? It would use a bit more stack space, but we shouldn't > > be short of stack space when going idle. > > > > Nick, was there a particular reason for using the red zone? > > I don't recall a particular reason, I think a normal stack frame is > probably a good idea. I'll send a version using STACKFRAMESIZE - I assume that's the "normal" stack frame :) I admit I am a bit confused when I saw the similar but much smaller STACK_FRAME_OVERHEAD which is also used in _some_ cases to save/restore a few registers. > > Thanks, > Nick
Excerpts from Christopher M. Riedl's message of February 4, 2021 4:59 pm: > On Sat Jan 30, 2021 at 7:44 AM CST, Nicholas Piggin wrote: >> Excerpts from Michael Ellerman's message of January 30, 2021 9:32 pm: >> > "Christopher M. Riedl" <cmr@codefail.de> writes: >> >> The idle entry/exit code saves/restores GPRs in the stack "red zone" >> >> (Protected Zone according to PowerPC64 ELF ABI v2). However, the offset >> >> used for the first GPR is incorrect and overwrites the back chain - the >> >> Protected Zone actually starts below the current SP. In practice this is >> >> probably not an issue, but it's still incorrect so fix it. >> > >> > Nice catch. >> > >> > Corrupting the back chain means you can't backtrace from there, which >> > could be confusing for debugging one day. >> >> Yeah, we seem to have got away without noticing because the CPU will >> wake up and return out of here before it tries to unwind the stack, >> but if you tried to walk it by hand if the CPU got stuck in idle or >> something, then we'd get confused. >> >> > It does make me wonder why we don't just create a stack frame and use >> > the normal macros? It would use a bit more stack space, but we shouldn't >> > be short of stack space when going idle. >> > >> > Nick, was there a particular reason for using the red zone? >> >> I don't recall a particular reason, I think a normal stack frame is >> probably a good idea. > > I'll send a version using STACKFRAMESIZE - I assume that's the "normal" > stack frame :) > I think STACKFRAMESIZE is STACK_FRAME_OVERHEAD + NVGPRs. LR and CR can be saved in the caller's frame so that should be okay. > I admit I am a bit confused when I saw the similar but much smaller > STACK_FRAME_OVERHEAD which is also used in _some_ cases to save/restore > a few registers. Yeah if you don't need to save all nvgprs you can use caller's frame plus a few bytes in the minimum frame as volatile storage. STACK_FRAME_OVERHEAD should be 32 on LE, but I think the problem is a lot of asm uses it and hasn't necessarily been audited to make sure it's not assuming it's bigger. You could actually use STACK_FRAME_MIN_SIZE for new code, maybe we add a STACK_FRAME_MIN_NVGPR_SIZE to match and use that. Thanks, Nick
Nicholas Piggin <npiggin@gmail.com> writes: > Excerpts from Christopher M. Riedl's message of February 4, 2021 4:59 pm: >> On Sat Jan 30, 2021 at 7:44 AM CST, Nicholas Piggin wrote: >>> Excerpts from Michael Ellerman's message of January 30, 2021 9:32 pm: >>> > "Christopher M. Riedl" <cmr@codefail.de> writes: >>> >> The idle entry/exit code saves/restores GPRs in the stack "red zone" >>> >> (Protected Zone according to PowerPC64 ELF ABI v2). However, the offset >>> >> used for the first GPR is incorrect and overwrites the back chain - the >>> >> Protected Zone actually starts below the current SP. In practice this is >>> >> probably not an issue, but it's still incorrect so fix it. >>> > >>> > Nice catch. >>> > >>> > Corrupting the back chain means you can't backtrace from there, which >>> > could be confusing for debugging one day. >>> >>> Yeah, we seem to have got away without noticing because the CPU will >>> wake up and return out of here before it tries to unwind the stack, >>> but if you tried to walk it by hand if the CPU got stuck in idle or >>> something, then we'd get confused. >>> >>> > It does make me wonder why we don't just create a stack frame and use >>> > the normal macros? It would use a bit more stack space, but we shouldn't >>> > be short of stack space when going idle. >>> > >>> > Nick, was there a particular reason for using the red zone? >>> >>> I don't recall a particular reason, I think a normal stack frame is >>> probably a good idea. >> >> I'll send a version using STACKFRAMESIZE - I assume that's the "normal" >> stack frame :) >> > > I think STACKFRAMESIZE is STACK_FRAME_OVERHEAD + NVGPRs. LR and CR can > be saved in the caller's frame so that should be okay. TBH I didn't know/had forgotten we had STACKFRAMESIZE. The safest is SWITCH_FRAME_SIZE, because it's calculated based on pt_regs (which can change size): DEFINE(SWITCH_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs)); But the name is obviously terrible for your usage, and it will allocate a bit more space than you need, because pt_regs has more than just the GPRs. >> I admit I am a bit confused when I saw the similar but much smaller >> STACK_FRAME_OVERHEAD which is also used in _some_ cases to save/restore >> a few registers. > > Yeah if you don't need to save all nvgprs you can use caller's frame > plus a few bytes in the minimum frame as volatile storage. > > STACK_FRAME_OVERHEAD should be 32 on LE, but I think the problem is a > lot of asm uses it and hasn't necessarily been audited to make sure it's > not assuming it's bigger. Yeah it's a total mess. See this ~3.5 year old issue :/ https://github.com/linuxppc/issues/issues/113 > You could actually use STACK_FRAME_MIN_SIZE for new code, maybe we add > a STACK_FRAME_MIN_NVGPR_SIZE to match and use that. Something like that makes me nervous because it's so easy to accidentally use one of the macros that expects a full pt_regs. I think ideally you have just two options. Option 1: You use: STACK_FRAME_WITH_PT_REGS = STACK_FRAME_MIN_SIZE + sizeof(struct pt_regs) And then you can use all the macros in asm-offsets.c generated with STACK_PT_REGS_OFFSET. Option 2: If you want to be fancy you manually allocate your frame with just the right amount of space, but with the size there in the code, so for example the idle code that wants 19 GPRs would do: stdu r1, -(STACK_FRAME_MIN_SIZE + 8 * 19)(r1) And then it's very obvious that you have a non-standard frame size and need to be more careful. cheers
Excerpts from Michael Ellerman's message of February 4, 2021 9:13 pm: > Nicholas Piggin <npiggin@gmail.com> writes: >> Excerpts from Christopher M. Riedl's message of February 4, 2021 4:59 pm: >>> On Sat Jan 30, 2021 at 7:44 AM CST, Nicholas Piggin wrote: >>>> Excerpts from Michael Ellerman's message of January 30, 2021 9:32 pm: >>>> > "Christopher M. Riedl" <cmr@codefail.de> writes: >>>> >> The idle entry/exit code saves/restores GPRs in the stack "red zone" >>>> >> (Protected Zone according to PowerPC64 ELF ABI v2). However, the offset >>>> >> used for the first GPR is incorrect and overwrites the back chain - the >>>> >> Protected Zone actually starts below the current SP. In practice this is >>>> >> probably not an issue, but it's still incorrect so fix it. >>>> > >>>> > Nice catch. >>>> > >>>> > Corrupting the back chain means you can't backtrace from there, which >>>> > could be confusing for debugging one day. >>>> >>>> Yeah, we seem to have got away without noticing because the CPU will >>>> wake up and return out of here before it tries to unwind the stack, >>>> but if you tried to walk it by hand if the CPU got stuck in idle or >>>> something, then we'd get confused. >>>> >>>> > It does make me wonder why we don't just create a stack frame and use >>>> > the normal macros? It would use a bit more stack space, but we shouldn't >>>> > be short of stack space when going idle. >>>> > >>>> > Nick, was there a particular reason for using the red zone? >>>> >>>> I don't recall a particular reason, I think a normal stack frame is >>>> probably a good idea. >>> >>> I'll send a version using STACKFRAMESIZE - I assume that's the "normal" >>> stack frame :) >>> >> >> I think STACKFRAMESIZE is STACK_FRAME_OVERHEAD + NVGPRs. LR and CR can >> be saved in the caller's frame so that should be okay. > > TBH I didn't know/had forgotten we had STACKFRAMESIZE. > > The safest is SWITCH_FRAME_SIZE, because it's calculated based on > pt_regs (which can change size): > > DEFINE(SWITCH_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs)); > > But the name is obviously terrible for your usage, and it will allocate > a bit more space than you need, because pt_regs has more than just the GPRs. I don't see why that's safer if we're not using pt_regs. > >>> I admit I am a bit confused when I saw the similar but much smaller >>> STACK_FRAME_OVERHEAD which is also used in _some_ cases to save/restore >>> a few registers. >> >> Yeah if you don't need to save all nvgprs you can use caller's frame >> plus a few bytes in the minimum frame as volatile storage. >> >> STACK_FRAME_OVERHEAD should be 32 on LE, but I think the problem is a >> lot of asm uses it and hasn't necessarily been audited to make sure it's >> not assuming it's bigger. > > Yeah it's a total mess. See this ~3.5 year old issue :/ > > https://github.com/linuxppc/issues/issues/113 > >> You could actually use STACK_FRAME_MIN_SIZE for new code, maybe we add >> a STACK_FRAME_MIN_NVGPR_SIZE to match and use that. > > Something like that makes me nervous because it's so easy to > accidentally use one of the macros that expects a full pt_regs. > > I think ideally you have just two options. > > Option 1: > > You use: > STACK_FRAME_WITH_PT_REGS = STACK_FRAME_MIN_SIZE + sizeof(struct pt_regs) > > And then you can use all the macros in asm-offsets.c generated with > STACK_PT_REGS_OFFSET. I don't see a good reason to use pt_regs here, but in general sure this would be good to have and begin using. > Option 2: > > If you want to be fancy you manually allocate your frame with just > the right amount of space, but with the size there in the code, so for > example the idle code that wants 19 GPRs would do: > > stdu r1, -(STACK_FRAME_MIN_SIZE + 8 * 19)(r1) > > And then it's very obvious that you have a non-standard frame size and > need to be more careful. I would be happy with this for the idle code. Thanks, Nick
diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S index 22f249b6f58d..80cf35183e9d 100644 --- a/arch/powerpc/kernel/idle_book3s.S +++ b/arch/powerpc/kernel/idle_book3s.S @@ -53,27 +53,27 @@ _GLOBAL(isa300_idle_stop_mayloss) mflr r4 mfcr r5 /* use stack red zone rather than a new frame for saving regs */ - std r2,-8*0(r1) - std r14,-8*1(r1) - std r15,-8*2(r1) - std r16,-8*3(r1) - std r17,-8*4(r1) - std r18,-8*5(r1) - std r19,-8*6(r1) - std r20,-8*7(r1) - std r21,-8*8(r1) - std r22,-8*9(r1) - std r23,-8*10(r1) - std r24,-8*11(r1) - std r25,-8*12(r1) - std r26,-8*13(r1) - std r27,-8*14(r1) - std r28,-8*15(r1) - std r29,-8*16(r1) - std r30,-8*17(r1) - std r31,-8*18(r1) - std r4,-8*19(r1) - std r5,-8*20(r1) + std r2,-8*1(r1) + std r14,-8*2(r1) + std r15,-8*3(r1) + std r16,-8*4(r1) + std r17,-8*5(r1) + std r18,-8*6(r1) + std r19,-8*7(r1) + std r20,-8*8(r1) + std r21,-8*9(r1) + std r22,-8*10(r1) + std r23,-8*11(r1) + std r24,-8*12(r1) + std r25,-8*13(r1) + std r26,-8*14(r1) + std r27,-8*15(r1) + std r28,-8*16(r1) + std r29,-8*17(r1) + std r30,-8*18(r1) + std r31,-8*19(r1) + std r4,-8*20(r1) + std r5,-8*21(r1) /* 168 bytes */ PPC_STOP b . /* catch bugs */ @@ -89,8 +89,8 @@ _GLOBAL(isa300_idle_stop_mayloss) */ _GLOBAL(idle_return_gpr_loss) ld r1,PACAR1(r13) - ld r4,-8*19(r1) - ld r5,-8*20(r1) + ld r4,-8*20(r1) + ld r5,-8*21(r1) mtlr r4 mtcr r5 /* @@ -98,25 +98,25 @@ _GLOBAL(idle_return_gpr_loss) * from PACATOC. This could be avoided for that less common case * if KVM saved its r2. */ - ld r2,-8*0(r1) - ld r14,-8*1(r1) - ld r15,-8*2(r1) - ld r16,-8*3(r1) - ld r17,-8*4(r1) - ld r18,-8*5(r1) - ld r19,-8*6(r1) - ld r20,-8*7(r1) - ld r21,-8*8(r1) - ld r22,-8*9(r1) - ld r23,-8*10(r1) - ld r24,-8*11(r1) - ld r25,-8*12(r1) - ld r26,-8*13(r1) - ld r27,-8*14(r1) - ld r28,-8*15(r1) - ld r29,-8*16(r1) - ld r30,-8*17(r1) - ld r31,-8*18(r1) + ld r2,-8*1(r1) + ld r14,-8*2(r1) + ld r15,-8*3(r1) + ld r16,-8*4(r1) + ld r17,-8*5(r1) + ld r18,-8*6(r1) + ld r19,-8*7(r1) + ld r20,-8*8(r1) + ld r21,-8*9(r1) + ld r22,-8*10(r1) + ld r23,-8*11(r1) + ld r24,-8*12(r1) + ld r25,-8*13(r1) + ld r26,-8*14(r1) + ld r27,-8*15(r1) + ld r28,-8*16(r1) + ld r29,-8*17(r1) + ld r30,-8*18(r1) + ld r31,-8*19(r1) blr /* @@ -155,27 +155,27 @@ _GLOBAL(isa206_idle_insn_mayloss) mflr r4 mfcr r5 /* use stack red zone rather than a new frame for saving regs */ - std r2,-8*0(r1) - std r14,-8*1(r1) - std r15,-8*2(r1) - std r16,-8*3(r1) - std r17,-8*4(r1) - std r18,-8*5(r1) - std r19,-8*6(r1) - std r20,-8*7(r1) - std r21,-8*8(r1) - std r22,-8*9(r1) - std r23,-8*10(r1) - std r24,-8*11(r1) - std r25,-8*12(r1) - std r26,-8*13(r1) - std r27,-8*14(r1) - std r28,-8*15(r1) - std r29,-8*16(r1) - std r30,-8*17(r1) - std r31,-8*18(r1) - std r4,-8*19(r1) - std r5,-8*20(r1) + std r2,-8*1(r1) + std r14,-8*2(r1) + std r15,-8*3(r1) + std r16,-8*4(r1) + std r17,-8*5(r1) + std r18,-8*6(r1) + std r19,-8*7(r1) + std r20,-8*8(r1) + std r21,-8*9(r1) + std r22,-8*10(r1) + std r23,-8*11(r1) + std r24,-8*12(r1) + std r25,-8*13(r1) + std r26,-8*14(r1) + std r27,-8*15(r1) + std r28,-8*16(r1) + std r29,-8*17(r1) + std r30,-8*18(r1) + std r31,-8*19(r1) + std r4,-8*20(r1) + std r5,-8*21(r1) cmpwi r3,PNV_THREAD_NAP bne 1f IDLE_STATE_ENTER_SEQ_NORET(PPC_NAP)
The idle entry/exit code saves/restores GPRs in the stack "red zone" (Protected Zone according to PowerPC64 ELF ABI v2). However, the offset used for the first GPR is incorrect and overwrites the back chain - the Protected Zone actually starts below the current SP. In practice this is probably not an issue, but it's still incorrect so fix it. Signed-off-by: Christopher M. Riedl <cmr@codefail.de> --- arch/powerpc/kernel/idle_book3s.S | 126 +++++++++++++++--------------- 1 file changed, 63 insertions(+), 63 deletions(-)