Message ID | 1307127842-12102-11-git-send-email-lcapitulino@redhat.com |
---|---|
State | New |
Headers | show |
On (Fri) 03 Jun 2011 [16:04:02], Luiz Capitulino wrote: > This commit rewrites change in terms of blockdev-tray-open, > blockdev-media-insert and blockdev-tray-close. > > There should be no visible changes in HMP or QMP, except that > the use of this command causes the BLOCK_TRAY_OPEN *and* > BLOCK_TRAY_CLOSE events to emitted. > > Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> > --- > blockdev.c | 43 +++++++++---------------------------------- > 1 files changed, 9 insertions(+), 34 deletions(-) > > diff --git a/blockdev.c b/blockdev.c > index 36c56fd..e9edcb3 100644 > --- a/blockdev.c > +++ b/blockdev.c > @@ -648,23 +648,6 @@ out: > return ret; > } > > -static int eject_device(Monitor *mon, BlockDriverState *bs, int force) > -{ > - if (!force) { > - if (!bdrv_is_removable(bs)) { > - qerror_report(QERR_DEVICE_NOT_REMOVABLE, > - bdrv_get_device_name(bs)); > - return -1; > - } > - if (bdrv_is_locked(bs)) { > - qerror_report(QERR_DEVICE_LOCKED, bdrv_get_device_name(bs)); > - return -1; > - } > - } > - bdrv_close(bs); > - return 0; > -} > - > static BlockDriverState *bdrv_removable_find(const char *name) > { > BlockDriverState *bs; > @@ -819,30 +802,22 @@ int do_change_block(Monitor *mon, const char *device, > const char *filename, const char *fmt) > { > BlockDriverState *bs; > - BlockDriver *drv = NULL; > - int bdrv_flags; > > - bs = bdrv_find(device); > - if (!bs) { > - qerror_report(QERR_DEVICE_NOT_FOUND, device); > + if (tray_open(device, 1, 0) < 0) { /* XXX: should we force? */ > return -1; > } > - if (fmt) { > - drv = bdrv_find_whitelisted_format(fmt); > - if (!drv) { > - qerror_report(QERR_INVALID_BLOCK_FORMAT, fmt); > - return -1; > - } > - } > - if (eject_device(mon, bs, 0) < 0) { > + > + if (media_insert(device, filename, fmt) < 0) { > return -1; > } > - bdrv_flags = bdrv_is_read_only(bs) ? 0 : BDRV_O_RDWR; > - bdrv_flags |= bdrv_is_snapshot(bs) ? BDRV_O_SNAPSHOT : 0; > - if (bdrv_open(bs, filename, bdrv_flags, drv) < 0) { > - qerror_report(QERR_OPEN_FILE_FAILED, filename); > + > + if (tray_close(device) < 0) { > + /* XXX: open the tray and remove the media? */ > return -1; > } So if the new medium points to a non-existent file, close will fail, and leave the tray in the open state. A next change command will fail because the tray is already open. Not a good thing. Amit
On Mon, 6 Jun 2011 17:18:31 +0530 Amit Shah <amit.shah@redhat.com> wrote: > On (Fri) 03 Jun 2011 [16:04:02], Luiz Capitulino wrote: > > This commit rewrites change in terms of blockdev-tray-open, > > blockdev-media-insert and blockdev-tray-close. > > > > There should be no visible changes in HMP or QMP, except that > > the use of this command causes the BLOCK_TRAY_OPEN *and* > > BLOCK_TRAY_CLOSE events to emitted. > > > > Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> > > --- > > blockdev.c | 43 +++++++++---------------------------------- > > 1 files changed, 9 insertions(+), 34 deletions(-) > > > > diff --git a/blockdev.c b/blockdev.c > > index 36c56fd..e9edcb3 100644 > > --- a/blockdev.c > > +++ b/blockdev.c > > @@ -648,23 +648,6 @@ out: > > return ret; > > } > > > > -static int eject_device(Monitor *mon, BlockDriverState *bs, int force) > > -{ > > - if (!force) { > > - if (!bdrv_is_removable(bs)) { > > - qerror_report(QERR_DEVICE_NOT_REMOVABLE, > > - bdrv_get_device_name(bs)); > > - return -1; > > - } > > - if (bdrv_is_locked(bs)) { > > - qerror_report(QERR_DEVICE_LOCKED, bdrv_get_device_name(bs)); > > - return -1; > > - } > > - } > > - bdrv_close(bs); > > - return 0; > > -} > > - > > static BlockDriverState *bdrv_removable_find(const char *name) > > { > > BlockDriverState *bs; > > @@ -819,30 +802,22 @@ int do_change_block(Monitor *mon, const char *device, > > const char *filename, const char *fmt) > > { > > BlockDriverState *bs; > > - BlockDriver *drv = NULL; > > - int bdrv_flags; > > > > - bs = bdrv_find(device); > > - if (!bs) { > > - qerror_report(QERR_DEVICE_NOT_FOUND, device); > > + if (tray_open(device, 1, 0) < 0) { /* XXX: should we force? */ > > return -1; > > } > > - if (fmt) { > > - drv = bdrv_find_whitelisted_format(fmt); > > - if (!drv) { > > - qerror_report(QERR_INVALID_BLOCK_FORMAT, fmt); > > - return -1; > > - } > > - } > > - if (eject_device(mon, bs, 0) < 0) { > > + > > + if (media_insert(device, filename, fmt) < 0) { > > return -1; > > } > > - bdrv_flags = bdrv_is_read_only(bs) ? 0 : BDRV_O_RDWR; > > - bdrv_flags |= bdrv_is_snapshot(bs) ? BDRV_O_SNAPSHOT : 0; > > - if (bdrv_open(bs, filename, bdrv_flags, drv) < 0) { > > - qerror_report(QERR_OPEN_FILE_FAILED, filename); > > + > > + if (tray_close(device) < 0) { > > + /* XXX: open the tray and remove the media? */ > > return -1; > > } > > So if the new medium points to a non-existent file, close will fail, media_insert() will and tray_close() won't be called. That's what you meant, right? > and leave the tray in the open state. A next change command will fail > because the tray is already open. Not a good thing. tray_open() shouldn't fail if the tray is already open.
On (Mon) 06 Jun 2011 [11:45:06], Luiz Capitulino wrote: > On Mon, 6 Jun 2011 17:18:31 +0530 > Amit Shah <amit.shah@redhat.com> wrote: > > > On (Fri) 03 Jun 2011 [16:04:02], Luiz Capitulino wrote: > > > This commit rewrites change in terms of blockdev-tray-open, > > > blockdev-media-insert and blockdev-tray-close. > > > > > > There should be no visible changes in HMP or QMP, except that > > > the use of this command causes the BLOCK_TRAY_OPEN *and* > > > BLOCK_TRAY_CLOSE events to emitted. > > > > > > Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> > > > --- > > > blockdev.c | 43 +++++++++---------------------------------- > > > 1 files changed, 9 insertions(+), 34 deletions(-) > > > > > > diff --git a/blockdev.c b/blockdev.c > > > index 36c56fd..e9edcb3 100644 > > > --- a/blockdev.c > > > +++ b/blockdev.c > > > @@ -648,23 +648,6 @@ out: > > > return ret; > > > } > > > > > > -static int eject_device(Monitor *mon, BlockDriverState *bs, int force) > > > -{ > > > - if (!force) { > > > - if (!bdrv_is_removable(bs)) { > > > - qerror_report(QERR_DEVICE_NOT_REMOVABLE, > > > - bdrv_get_device_name(bs)); > > > - return -1; > > > - } > > > - if (bdrv_is_locked(bs)) { > > > - qerror_report(QERR_DEVICE_LOCKED, bdrv_get_device_name(bs)); > > > - return -1; > > > - } > > > - } > > > - bdrv_close(bs); > > > - return 0; > > > -} > > > - > > > static BlockDriverState *bdrv_removable_find(const char *name) > > > { > > > BlockDriverState *bs; > > > @@ -819,30 +802,22 @@ int do_change_block(Monitor *mon, const char *device, > > > const char *filename, const char *fmt) > > > { > > > BlockDriverState *bs; > > > - BlockDriver *drv = NULL; > > > - int bdrv_flags; > > > > > > - bs = bdrv_find(device); > > > - if (!bs) { > > > - qerror_report(QERR_DEVICE_NOT_FOUND, device); > > > + if (tray_open(device, 1, 0) < 0) { /* XXX: should we force? */ > > > return -1; > > > } > > > - if (fmt) { > > > - drv = bdrv_find_whitelisted_format(fmt); > > > - if (!drv) { > > > - qerror_report(QERR_INVALID_BLOCK_FORMAT, fmt); > > > - return -1; > > > - } > > > - } > > > - if (eject_device(mon, bs, 0) < 0) { > > > + > > > + if (media_insert(device, filename, fmt) < 0) { > > > return -1; > > > } > > > - bdrv_flags = bdrv_is_read_only(bs) ? 0 : BDRV_O_RDWR; > > > - bdrv_flags |= bdrv_is_snapshot(bs) ? BDRV_O_SNAPSHOT : 0; > > > - if (bdrv_open(bs, filename, bdrv_flags, drv) < 0) { > > > - qerror_report(QERR_OPEN_FILE_FAILED, filename); > > > + > > > + if (tray_close(device) < 0) { > > > + /* XXX: open the tray and remove the media? */ > > > return -1; > > > } > > > > So if the new medium points to a non-existent file, close will fail, > > media_insert() will and tray_close() won't be called. That's what you > meant, right? Yes. > > and leave the tray in the open state. A next change command will fail > > because the tray is already open. Not a good thing. > > tray_open() shouldn't fail if the tray is already open. Ah, that's right. Amit
diff --git a/blockdev.c b/blockdev.c index 36c56fd..e9edcb3 100644 --- a/blockdev.c +++ b/blockdev.c @@ -648,23 +648,6 @@ out: return ret; } -static int eject_device(Monitor *mon, BlockDriverState *bs, int force) -{ - if (!force) { - if (!bdrv_is_removable(bs)) { - qerror_report(QERR_DEVICE_NOT_REMOVABLE, - bdrv_get_device_name(bs)); - return -1; - } - if (bdrv_is_locked(bs)) { - qerror_report(QERR_DEVICE_LOCKED, bdrv_get_device_name(bs)); - return -1; - } - } - bdrv_close(bs); - return 0; -} - static BlockDriverState *bdrv_removable_find(const char *name) { BlockDriverState *bs; @@ -819,30 +802,22 @@ int do_change_block(Monitor *mon, const char *device, const char *filename, const char *fmt) { BlockDriverState *bs; - BlockDriver *drv = NULL; - int bdrv_flags; - bs = bdrv_find(device); - if (!bs) { - qerror_report(QERR_DEVICE_NOT_FOUND, device); + if (tray_open(device, 1, 0) < 0) { /* XXX: should we force? */ return -1; } - if (fmt) { - drv = bdrv_find_whitelisted_format(fmt); - if (!drv) { - qerror_report(QERR_INVALID_BLOCK_FORMAT, fmt); - return -1; - } - } - if (eject_device(mon, bs, 0) < 0) { + + if (media_insert(device, filename, fmt) < 0) { return -1; } - bdrv_flags = bdrv_is_read_only(bs) ? 0 : BDRV_O_RDWR; - bdrv_flags |= bdrv_is_snapshot(bs) ? BDRV_O_SNAPSHOT : 0; - if (bdrv_open(bs, filename, bdrv_flags, drv) < 0) { - qerror_report(QERR_OPEN_FILE_FAILED, filename); + + if (tray_close(device) < 0) { + /* XXX: open the tray and remove the media? */ return -1; } + + bs = bdrv_find(device); /* XXX: bdrv_find() is called 4 times */ + assert(bs != NULL); return monitor_read_bdrv_key_start(mon, bs, NULL, NULL); }
This commit rewrites change in terms of blockdev-tray-open, blockdev-media-insert and blockdev-tray-close. There should be no visible changes in HMP or QMP, except that the use of this command causes the BLOCK_TRAY_OPEN *and* BLOCK_TRAY_CLOSE events to emitted. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> --- blockdev.c | 43 +++++++++---------------------------------- 1 files changed, 9 insertions(+), 34 deletions(-)