Message ID | 20190801225006.21952-1-chris.packham@alliedtelesis.co.nz (mailing list archive) |
---|---|
State | Accepted |
Commit | d79fbb3a32f05a7e1cc0294b86dacdb9cc3ad7f5 |
Headers | show |
Series | [v3] powerpc: Support CMDLINE_EXTEND | expand |
Context | Check | Description |
---|---|---|
snowpatch_ozlabs/apply_patch | success | Successfully applied on branch next (f3365d1a959d5c6527efe3d38276acc9b58e3f3f) |
snowpatch_ozlabs/build-ppc64le | success | Build succeeded |
snowpatch_ozlabs/build-ppc64be | success | Build succeeded |
snowpatch_ozlabs/build-ppc64e | success | Build succeeded |
snowpatch_ozlabs/build-pmac32 | success | Build succeeded |
snowpatch_ozlabs/checkpatch | warning | total: 0 errors, 1 warnings, 1 checks, 84 lines checked |
Le 02/08/2019 à 00:50, Chris Packham a écrit : > Bring powerpc in line with other architectures that support extending or > overriding the bootloader provided command line. > > The current behaviour is most like CMDLINE_FROM_BOOTLOADER where the > bootloader command line is preferred but the kernel config can provide a > fallback so CMDLINE_FROM_BOOTLOADER is the default. CMDLINE_EXTEND can > be used to append the CMDLINE from the kernel config to the one provided > by the bootloader. > > Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> > --- > Changes in v3: > - don't use BUG_ON in prom_strlcat > - rearrange things to eliminate prom_strlcpy > > Changes in v2: > - incorporate ideas from Christope's patch https://patchwork.ozlabs.org/patch/1074126/ > - support CMDLINE_FORCE > > arch/powerpc/Kconfig | 20 +++++++++++++++++- > arch/powerpc/kernel/prom_init.c | 36 ++++++++++++++++++++++----------- > 2 files changed, 43 insertions(+), 13 deletions(-) > > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig > index 77f6ebf97113..d413fe1b4058 100644 > --- a/arch/powerpc/Kconfig > +++ b/arch/powerpc/Kconfig > @@ -852,15 +852,33 @@ config CMDLINE > some command-line options at build time by entering them here. In > most cases you will need to specify the root device here. > > +choice > + prompt "Kernel command line type" if CMDLINE != "" > + default CMDLINE_FROM_BOOTLOADER > + > +config CMDLINE_FROM_BOOTLOADER > + bool "Use bootloader kernel arguments if available" > + help > + Uses the command-line options passed by the boot loader. If > + the boot loader doesn't provide any, the default kernel command > + string provided in CMDLINE will be used. > + > +config CMDLINE_EXTEND > + bool "Extend bootloader kernel arguments" > + help > + The command-line arguments provided by the boot loader will be > + appended to the default kernel command string. > + > config CMDLINE_FORCE > bool "Always use the default kernel command string" > - depends on CMDLINE_BOOL > help > Always use the default kernel command string, even if the boot > loader passes other arguments to the kernel. > This is useful if you cannot or don't want to change the > command-line options your boot loader passes to the kernel. > > +endchoice > + > config EXTRA_TARGETS > string "Additional default image types" > help > diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c > index 514707ef6779..1c7010cc6ec9 100644 > --- a/arch/powerpc/kernel/prom_init.c > +++ b/arch/powerpc/kernel/prom_init.c > @@ -298,16 +298,24 @@ static char __init *prom_strstr(const char *s1, const char *s2) > return NULL; > } > > -static size_t __init prom_strlcpy(char *dest, const char *src, size_t size) > -{ > - size_t ret = prom_strlen(src); > +static size_t __init prom_strlcat(char *dest, const char *src, size_t count) > +{ > + size_t dsize = prom_strlen(dest); > + size_t len = prom_strlen(src); > + size_t res = dsize + len; > + > + /* This would be a bug */ > + if (dsize >= count) > + return count; > + > + dest += dsize; > + count -= dsize; > + if (len >= count) > + len = count-1; > + memcpy(dest, src, len); > + dest[len] = 0; > + return res; > > - if (size) { > - size_t len = (ret >= size) ? size - 1 : ret; > - memcpy(dest, src, len); > - dest[len] = '\0'; > - } > - return ret; > } > > #ifdef CONFIG_PPC_PSERIES > @@ -759,10 +767,14 @@ static void __init early_cmdline_parse(void) > > prom_cmd_line[0] = 0; > p = prom_cmd_line; > - if ((long)prom.chosen > 0) > + > + if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && (long)prom.chosen > 0) > l = prom_getprop(prom.chosen, "bootargs", p, COMMAND_LINE_SIZE-1); > - if (IS_ENABLED(CONFIG_CMDLINE_BOOL) && (l <= 0 || p[0] == '\0')) /* dbl check */ > - prom_strlcpy(prom_cmd_line, CONFIG_CMDLINE, sizeof(prom_cmd_line)); > + > + if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) || l <= 0 || p[0] == '\0') > + prom_strlcat(prom_cmd_line, " " CONFIG_CMDLINE, > + sizeof(prom_cmd_line)); > + > prom_printf("command line: %s\n", prom_cmd_line); > > #ifdef CONFIG_PPC64 >
Hi All, On Fri, 2019-08-02 at 06:40 +0200, Christophe Leroy wrote: > > Le 02/08/2019 à 00:50, Chris Packham a écrit : > > Bring powerpc in line with other architectures that support extending or > > overriding the bootloader provided command line. > > > > The current behaviour is most like CMDLINE_FROM_BOOTLOADER where the > > bootloader command line is preferred but the kernel config can provide a > > fallback so CMDLINE_FROM_BOOTLOADER is the default. CMDLINE_EXTEND can > > be used to append the CMDLINE from the kernel config to the one provided > > by the bootloader. > > > > Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> > > Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> I see this hasn't hit Linus's tree is it waiting for me to do something or just fallen off the radar? > > > --- > > Changes in v3: > > - don't use BUG_ON in prom_strlcat > > - rearrange things to eliminate prom_strlcpy > > > > Changes in v2: > > - incorporate ideas from Christope's patch https://patchwork.ozlabs.org/patch/1074126/ > > - support CMDLINE_FORCE > > > > arch/powerpc/Kconfig | 20 +++++++++++++++++- > > arch/powerpc/kernel/prom_init.c | 36 ++++++++++++++++++++++----------- > > 2 files changed, 43 insertions(+), 13 deletions(-) > > > > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig > > index 77f6ebf97113..d413fe1b4058 100644 > > --- a/arch/powerpc/Kconfig > > +++ b/arch/powerpc/Kconfig > > @@ -852,15 +852,33 @@ config CMDLINE > > some command-line options at build time by entering them here. In > > most cases you will need to specify the root device here. > > > > +choice > > + prompt "Kernel command line type" if CMDLINE != "" > > + default CMDLINE_FROM_BOOTLOADER > > + > > +config CMDLINE_FROM_BOOTLOADER > > + bool "Use bootloader kernel arguments if available" > > + help > > + Uses the command-line options passed by the boot loader. If > > + the boot loader doesn't provide any, the default kernel command > > + string provided in CMDLINE will be used. > > + > > +config CMDLINE_EXTEND > > + bool "Extend bootloader kernel arguments" > > + help > > + The command-line arguments provided by the boot loader will be > > + appended to the default kernel command string. > > + > > config CMDLINE_FORCE > > bool "Always use the default kernel command string" > > - depends on CMDLINE_BOOL > > help > > Always use the default kernel command string, even if the boot > > loader passes other arguments to the kernel. > > This is useful if you cannot or don't want to change the > > command-line options your boot loader passes to the kernel. > > > > +endchoice > > + > > config EXTRA_TARGETS > > string "Additional default image types" > > help > > diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c > > index 514707ef6779..1c7010cc6ec9 100644 > > --- a/arch/powerpc/kernel/prom_init.c > > +++ b/arch/powerpc/kernel/prom_init.c > > @@ -298,16 +298,24 @@ static char __init *prom_strstr(const char *s1, const char *s2) > > return NULL; > > } > > > > -static size_t __init prom_strlcpy(char *dest, const char *src, size_t size) > > -{ > > - size_t ret = prom_strlen(src); > > +static size_t __init prom_strlcat(char *dest, const char *src, size_t count) > > +{ > > + size_t dsize = prom_strlen(dest); > > + size_t len = prom_strlen(src); > > + size_t res = dsize + len; > > + > > + /* This would be a bug */ > > + if (dsize >= count) > > + return count; > > + > > + dest += dsize; > > + count -= dsize; > > + if (len >= count) > > + len = count-1; > > + memcpy(dest, src, len); > > + dest[len] = 0; > > + return res; > > > > - if (size) { > > - size_t len = (ret >= size) ? size - 1 : ret; > > - memcpy(dest, src, len); > > - dest[len] = '\0'; > > - } > > - return ret; > > } > > > > #ifdef CONFIG_PPC_PSERIES > > @@ -759,10 +767,14 @@ static void __init early_cmdline_parse(void) > > > > prom_cmd_line[0] = 0; > > p = prom_cmd_line; > > - if ((long)prom.chosen > 0) > > + > > + if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && (long)prom.chosen > 0) > > l = prom_getprop(prom.chosen, "bootargs", p, COMMAND_LINE_SIZE-1); > > - if (IS_ENABLED(CONFIG_CMDLINE_BOOL) && (l <= 0 || p[0] == '\0')) /* dbl check */ > > - prom_strlcpy(prom_cmd_line, CONFIG_CMDLINE, sizeof(prom_cmd_line)); > > + > > + if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) || l <= 0 || p[0] == '\0') > > + prom_strlcat(prom_cmd_line, " " CONFIG_CMDLINE, > > + sizeof(prom_cmd_line)); > > + > > prom_printf("command line: %s\n", prom_cmd_line); > > > > #ifdef CONFIG_PPC64 > >
Hi All, On Fri, 2019-08-02 at 06:40 +0200, Christophe Leroy wrote: > > Le 02/08/2019 à 00:50, Chris Packham a écrit : > > Bring powerpc in line with other architectures that support extending or > > overriding the bootloader provided command line. > > > > The current behaviour is most like CMDLINE_FROM_BOOTLOADER where the > > bootloader command line is preferred but the kernel config can provide a > > fallback so CMDLINE_FROM_BOOTLOADER is the default. CMDLINE_EXTEND can > > be used to append the CMDLINE from the kernel config to the one provided > > by the bootloader. > > > > Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> > > Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Just going over some old patches this doesn't appear to be in next. Is there anything stopping it from being accepted? > > > --- > > Changes in v3: > > - don't use BUG_ON in prom_strlcat > > - rearrange things to eliminate prom_strlcpy > > > > Changes in v2: > > - incorporate ideas from Christope's patch https://patchwork.ozlabs.org/patch/1074126/ > > - support CMDLINE_FORCE > > > > arch/powerpc/Kconfig | 20 +++++++++++++++++- > > arch/powerpc/kernel/prom_init.c | 36 ++++++++++++++++++++++----------- > > 2 files changed, 43 insertions(+), 13 deletions(-) > > > > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig > > index 77f6ebf97113..d413fe1b4058 100644 > > --- a/arch/powerpc/Kconfig > > +++ b/arch/powerpc/Kconfig > > @@ -852,15 +852,33 @@ config CMDLINE > > some command-line options at build time by entering them here. In > > most cases you will need to specify the root device here. > > > > +choice > > + prompt "Kernel command line type" if CMDLINE != "" > > + default CMDLINE_FROM_BOOTLOADER > > + > > +config CMDLINE_FROM_BOOTLOADER > > + bool "Use bootloader kernel arguments if available" > > + help > > + Uses the command-line options passed by the boot loader. If > > + the boot loader doesn't provide any, the default kernel command > > + string provided in CMDLINE will be used. > > + > > +config CMDLINE_EXTEND > > + bool "Extend bootloader kernel arguments" > > + help > > + The command-line arguments provided by the boot loader will be > > + appended to the default kernel command string. > > + > > config CMDLINE_FORCE > > bool "Always use the default kernel command string" > > - depends on CMDLINE_BOOL > > help > > Always use the default kernel command string, even if the boot > > loader passes other arguments to the kernel. > > This is useful if you cannot or don't want to change the > > command-line options your boot loader passes to the kernel. > > > > +endchoice > > + > > config EXTRA_TARGETS > > string "Additional default image types" > > help > > diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c > > index 514707ef6779..1c7010cc6ec9 100644 > > --- a/arch/powerpc/kernel/prom_init.c > > +++ b/arch/powerpc/kernel/prom_init.c > > @@ -298,16 +298,24 @@ static char __init *prom_strstr(const char *s1, const char *s2) > > return NULL; > > } > > > > -static size_t __init prom_strlcpy(char *dest, const char *src, size_t size) > > -{ > > - size_t ret = prom_strlen(src); > > +static size_t __init prom_strlcat(char *dest, const char *src, size_t count) > > +{ > > + size_t dsize = prom_strlen(dest); > > + size_t len = prom_strlen(src); > > + size_t res = dsize + len; > > + > > + /* This would be a bug */ > > + if (dsize >= count) > > + return count; > > + > > + dest += dsize; > > + count -= dsize; > > + if (len >= count) > > + len = count-1; > > + memcpy(dest, src, len); > > + dest[len] = 0; > > + return res; > > > > - if (size) { > > - size_t len = (ret >= size) ? size - 1 : ret; > > - memcpy(dest, src, len); > > - dest[len] = '\0'; > > - } > > - return ret; > > } > > > > #ifdef CONFIG_PPC_PSERIES > > @@ -759,10 +767,14 @@ static void __init early_cmdline_parse(void) > > > > prom_cmd_line[0] = 0; > > p = prom_cmd_line; > > - if ((long)prom.chosen > 0) > > + > > + if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && (long)prom.chosen > 0) > > l = prom_getprop(prom.chosen, "bootargs", p, COMMAND_LINE_SIZE-1); > > - if (IS_ENABLED(CONFIG_CMDLINE_BOOL) && (l <= 0 || p[0] == '\0')) /* dbl check */ > > - prom_strlcpy(prom_cmd_line, CONFIG_CMDLINE, sizeof(prom_cmd_line)); > > + > > + if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) || l <= 0 || p[0] == '\0') > > + prom_strlcat(prom_cmd_line, " " CONFIG_CMDLINE, > > + sizeof(prom_cmd_line)); > > + > > prom_printf("command line: %s\n", prom_cmd_line); > > > > #ifdef CONFIG_PPC64 > >
Chris Packham <Chris.Packham@alliedtelesis.co.nz> writes: > Hi All, > > On Fri, 2019-08-02 at 06:40 +0200, Christophe Leroy wrote: >> >> Le 02/08/2019 à 00:50, Chris Packham a écrit : >> > Bring powerpc in line with other architectures that support extending or >> > overriding the bootloader provided command line. >> > >> > The current behaviour is most like CMDLINE_FROM_BOOTLOADER where the >> > bootloader command line is preferred but the kernel config can provide a >> > fallback so CMDLINE_FROM_BOOTLOADER is the default. CMDLINE_EXTEND can >> > be used to append the CMDLINE from the kernel config to the one provided >> > by the bootloader. >> > >> > Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> >> >> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> > > Just going over some old patches this doesn't appear to be in next. Is > there anything stopping it from being accepted? Just me not being overloaded :/, sorry. Have put it in my next-test branch, which means it should appear in next in the next few days. cheers
On Thu, 2019-08-01 at 22:50:06 UTC, Chris Packham wrote: > Bring powerpc in line with other architectures that support extending or > overriding the bootloader provided command line. > > The current behaviour is most like CMDLINE_FROM_BOOTLOADER where the > bootloader command line is preferred but the kernel config can provide a > fallback so CMDLINE_FROM_BOOTLOADER is the default. CMDLINE_EXTEND can > be used to append the CMDLINE from the kernel config to the one provided > by the bootloader. > > Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Applied to powerpc next, thanks. https://git.kernel.org/powerpc/c/d79fbb3a32f05a7e1cc0294b86dacdb9cc3ad7f5 cheers
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 77f6ebf97113..d413fe1b4058 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -852,15 +852,33 @@ config CMDLINE some command-line options at build time by entering them here. In most cases you will need to specify the root device here. +choice + prompt "Kernel command line type" if CMDLINE != "" + default CMDLINE_FROM_BOOTLOADER + +config CMDLINE_FROM_BOOTLOADER + bool "Use bootloader kernel arguments if available" + help + Uses the command-line options passed by the boot loader. If + the boot loader doesn't provide any, the default kernel command + string provided in CMDLINE will be used. + +config CMDLINE_EXTEND + bool "Extend bootloader kernel arguments" + help + The command-line arguments provided by the boot loader will be + appended to the default kernel command string. + config CMDLINE_FORCE bool "Always use the default kernel command string" - depends on CMDLINE_BOOL help Always use the default kernel command string, even if the boot loader passes other arguments to the kernel. This is useful if you cannot or don't want to change the command-line options your boot loader passes to the kernel. +endchoice + config EXTRA_TARGETS string "Additional default image types" help diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 514707ef6779..1c7010cc6ec9 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -298,16 +298,24 @@ static char __init *prom_strstr(const char *s1, const char *s2) return NULL; } -static size_t __init prom_strlcpy(char *dest, const char *src, size_t size) -{ - size_t ret = prom_strlen(src); +static size_t __init prom_strlcat(char *dest, const char *src, size_t count) +{ + size_t dsize = prom_strlen(dest); + size_t len = prom_strlen(src); + size_t res = dsize + len; + + /* This would be a bug */ + if (dsize >= count) + return count; + + dest += dsize; + count -= dsize; + if (len >= count) + len = count-1; + memcpy(dest, src, len); + dest[len] = 0; + return res; - if (size) { - size_t len = (ret >= size) ? size - 1 : ret; - memcpy(dest, src, len); - dest[len] = '\0'; - } - return ret; } #ifdef CONFIG_PPC_PSERIES @@ -759,10 +767,14 @@ static void __init early_cmdline_parse(void) prom_cmd_line[0] = 0; p = prom_cmd_line; - if ((long)prom.chosen > 0) + + if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && (long)prom.chosen > 0) l = prom_getprop(prom.chosen, "bootargs", p, COMMAND_LINE_SIZE-1); - if (IS_ENABLED(CONFIG_CMDLINE_BOOL) && (l <= 0 || p[0] == '\0')) /* dbl check */ - prom_strlcpy(prom_cmd_line, CONFIG_CMDLINE, sizeof(prom_cmd_line)); + + if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) || l <= 0 || p[0] == '\0') + prom_strlcat(prom_cmd_line, " " CONFIG_CMDLINE, + sizeof(prom_cmd_line)); + prom_printf("command line: %s\n", prom_cmd_line); #ifdef CONFIG_PPC64
Bring powerpc in line with other architectures that support extending or overriding the bootloader provided command line. The current behaviour is most like CMDLINE_FROM_BOOTLOADER where the bootloader command line is preferred but the kernel config can provide a fallback so CMDLINE_FROM_BOOTLOADER is the default. CMDLINE_EXTEND can be used to append the CMDLINE from the kernel config to the one provided by the bootloader. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> --- Changes in v3: - don't use BUG_ON in prom_strlcat - rearrange things to eliminate prom_strlcpy Changes in v2: - incorporate ideas from Christope's patch https://patchwork.ozlabs.org/patch/1074126/ - support CMDLINE_FORCE arch/powerpc/Kconfig | 20 +++++++++++++++++- arch/powerpc/kernel/prom_init.c | 36 ++++++++++++++++++++++----------- 2 files changed, 43 insertions(+), 13 deletions(-)