Message ID | 1499274819-15607-8-git-send-email-clg@kaod.org |
---|---|
State | New |
Headers | show |
On Wed, Jul 05, 2017 at 07:13:20PM +0200, Cédric Le Goater wrote: > Each interrupt source is associated with a 2-bit state machine called > an Event State Buffer (ESB). It is controlled by MMIO to trigger > events. > > See code for more details on the states. > > Signed-off-by: Cédric Le Goater <clg@kaod.org> > --- > hw/intc/xive.c | 230 ++++++++++++++++++++++++++++++++++++++++++++++++++ > include/hw/ppc/xive.h | 3 + > 2 files changed, 233 insertions(+) > > diff --git a/hw/intc/xive.c b/hw/intc/xive.c > index 9ff14c0da595..816031b8ac81 100644 > --- a/hw/intc/xive.c > +++ b/hw/intc/xive.c > @@ -32,6 +32,226 @@ static void xive_icp_irq(XiveICSState *xs, int lisn) > } > > /* > + * "magic" Event State Buffer (ESB) MMIO offsets. > + * > + * Each interrupt source has a 2-bit state machine called ESB > + * which can be controlled by MMIO. It's made of 2 bits, P and > + * Q. P indicates that an interrupt is pending (has been sent > + * to a queue and is waiting for an EOI). Q indicates that the > + * interrupt has been triggered while pending. > + * > + * This acts as a coalescing mechanism in order to guarantee > + * that a given interrupt only occurs at most once in a queue. > + * > + * When doing an EOI, the Q bit will indicate if the interrupt > + * needs to be re-triggered. > + * > + * The following offsets into the ESB MMIO allow to read or > + * manipulate the PQ bits. They must be used with an 8-bytes > + * load instruction. They all return the previous state of the > + * interrupt (atomically). > + * > + * Additionally, some ESB pages support doing an EOI via a > + * store at 0 and some ESBs support doing a trigger via a > + * separate trigger page. > + */ > +#define XIVE_ESB_GET 0x800 > +#define XIVE_ESB_SET_PQ_00 0xc00 > +#define XIVE_ESB_SET_PQ_01 0xd00 > +#define XIVE_ESB_SET_PQ_10 0xe00 > +#define XIVE_ESB_SET_PQ_11 0xf00 > + > +#define XIVE_ESB_VAL_P 0x2 > +#define XIVE_ESB_VAL_Q 0x1 > + > +#define XIVE_ESB_RESET 0x0 > +#define XIVE_ESB_PENDING 0x2 > +#define XIVE_ESB_QUEUED 0x3 > +#define XIVE_ESB_OFF 0x1 > + > +static uint8_t xive_pq_get(XIVE *x, uint32_t lisn) > +{ > + uint32_t idx = lisn; > + uint32_t byte = idx / 4; > + uint32_t bit = (idx % 4) * 2; > + uint8_t* pqs = (uint8_t *) x->sbe; > + > + return (pqs[byte] >> bit) & 0x3; > +} > + > +static void xive_pq_set(XIVE *x, uint32_t lisn, uint8_t pq) > +{ > + uint32_t idx = lisn; > + uint32_t byte = idx / 4; > + uint32_t bit = (idx % 4) * 2; > + uint8_t* pqs = (uint8_t *) x->sbe; > + > + pqs[byte] &= ~(0x3 << bit); > + pqs[byte] |= (pq & 0x3) << bit; I know it probably amounts to the same thing given the context, but I'd be more comfortable with a temporary and an obviously atomic update than two writes to the real state variable. > +} > + > +static bool xive_pq_eoi(XIVE *x, uint32_t lisn) > +{ > + uint8_t old_pq = xive_pq_get(x, lisn); > + > + switch (old_pq) { > + case XIVE_ESB_RESET: > + xive_pq_set(x, lisn, XIVE_ESB_RESET); > + return false; > + case XIVE_ESB_PENDING: > + xive_pq_set(x, lisn, XIVE_ESB_RESET); > + return false; > + case XIVE_ESB_QUEUED: > + xive_pq_set(x, lisn, XIVE_ESB_PENDING); > + return true; > + case XIVE_ESB_OFF: > + xive_pq_set(x, lisn, XIVE_ESB_OFF); > + return false; > + default: > + g_assert_not_reached(); > + } > +} > + > +static bool xive_pq_trigger(XIVE *x, uint32_t lisn) > +{ > + uint8_t old_pq = xive_pq_get(x, lisn); > + > + switch (old_pq) { > + case XIVE_ESB_RESET: > + xive_pq_set(x, lisn, XIVE_ESB_PENDING); > + return true; > + case XIVE_ESB_PENDING: > + xive_pq_set(x, lisn, XIVE_ESB_QUEUED); > + return true; > + case XIVE_ESB_QUEUED: > + xive_pq_set(x, lisn, XIVE_ESB_QUEUED); > + return true; > + case XIVE_ESB_OFF: > + xive_pq_set(x, lisn, XIVE_ESB_OFF); > + return false; > + default: > + g_assert_not_reached(); > + } > +} > + > +/* > + * XIVE Interrupt Source MMIOs > + */ > +static void xive_ics_eoi(XiveICSState *xs, uint32_t srcno) > +{ > + ICSIRQState *irq = &ICS_BASE(xs)->irqs[srcno]; > + > + if (irq->flags & XICS_FLAGS_IRQ_LSI) { > + irq->status &= ~XICS_STATUS_SENT; > + } > +} > + > +/* TODO: handle second page */ Is this comment still relevent? > +static uint64_t xive_esb_read(void *opaque, hwaddr addr, unsigned size) > +{ > + XiveICSState *xs = ICS_XIVE(opaque); > + XIVE *x = xs->xive; > + uint32_t offset = addr & 0xF00; > + uint32_t srcno = addr >> xs->esb_shift; > + uint32_t lisn = srcno + ICS_BASE(xs)->offset; > + XiveIVE *ive; > + uint64_t ret = -1; > + > + ive = xive_get_ive(x, lisn); > + if (!ive || !(ive->w & IVE_VALID)) { > + qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid LISN %d\n", lisn); > + goto out; > + } > + > + if (srcno >= ICS_BASE(xs)->nr_irqs) { > + qemu_log_mask(LOG_GUEST_ERROR, > + "XIVE: invalid IRQ number: %d/%d lisn: %d\n", > + srcno, ICS_BASE(xs)->nr_irqs, lisn); > + goto out; > + } > + > + switch (offset) { > + case 0: > + xive_ics_eoi(xs, srcno); > + > + /* return TRUE or FALSE depending on PQ value */ > + ret = xive_pq_eoi(x, lisn); > + break; > + > + case XIVE_ESB_GET: > + ret = xive_pq_get(x, lisn); > + break; > + > + case XIVE_ESB_SET_PQ_00: > + case XIVE_ESB_SET_PQ_01: > + case XIVE_ESB_SET_PQ_10: > + case XIVE_ESB_SET_PQ_11: > + ret = xive_pq_get(x, lisn); > + xive_pq_set(x, lisn, (offset >> 8) & 0x3); Again I'd prefer xive_pq_set() return the old value itself, for more obvious atomicity. > + break; > + default: > + qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid ESB addr %d\n", offset); > + } > + > +out: > + return ret; > +} > + > +static void xive_esb_write(void *opaque, hwaddr addr, > + uint64_t value, unsigned size) > +{ > + XiveICSState *xs = ICS_XIVE(opaque); > + XIVE *x = xs->xive; > + uint32_t offset = addr & 0xF00; > + uint32_t srcno = addr >> xs->esb_shift; > + uint32_t lisn = srcno + ICS_BASE(xs)->offset; > + XiveIVE *ive; > + bool notify = false; > + > + ive = xive_get_ive(x, lisn); > + if (!ive || !(ive->w & IVE_VALID)) { > + qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid LISN %d\n", lisn); > + return; > + } Having this code associated with the individual ICS look directly at the IVE table in the core xive object seems a bit dubious. This also points out another mismatch between the re-used ICS code and the new XIVE code: ICS gathers all the per-source-irq flags/state into the irqstate structure, whereas xive has per-irq information in the centralized ecb and IVE tables. There can certainly be good reasons for that, but using both at once is kind of clunky. > + if (srcno >= ICS_BASE(xs)->nr_irqs) { > + qemu_log_mask(LOG_GUEST_ERROR, > + "XIVE: invalid IRQ number: %d/%d lisn: %d\n", > + srcno, ICS_BASE(xs)->nr_irqs, lisn); > + return; > + } > + > + switch (offset) { > + case 0: > + /* TODO: should we trigger even if the IVE is masked ? */ > + notify = xive_pq_trigger(x, lisn); > + break; > + default: > + qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid ESB write addr %d\n", > + offset); > + return; > + } > + > + if (notify && !(ive->w & IVE_MASKED)) { > + qemu_irq_pulse(ICS_BASE(xs)->qirqs[srcno]); > + } > +} > + > +static const MemoryRegionOps xive_esb_ops = { > + .read = xive_esb_read, > + .write = xive_esb_write, > + .endianness = DEVICE_BIG_ENDIAN, > + .valid = { > + .min_access_size = 8, > + .max_access_size = 8, > + }, > + .impl = { > + .min_access_size = 8, > + .max_access_size = 8, > + }, > +}; > + > +/* > * XIVE Interrupt Source > */ > static void xive_ics_set_irq_msi(XiveICSState *xs, int srcno, int val) > @@ -106,15 +326,25 @@ static void xive_ics_realize(ICSState *ics, Error **errp) > return; > } > > + if (!xs->esb_shift) { > + error_setg(errp, "ESB page size needs to be greater 0"); > + return; > + } > + > ics->irqs = g_malloc0(ics->nr_irqs * sizeof(ICSIRQState)); > ics->qirqs = qemu_allocate_irqs(xive_ics_set_irq, xs, ics->nr_irqs); > > + memory_region_init_io(&xs->esb_iomem, OBJECT(xs), &xive_esb_ops, xs, > + "xive.esb", > + (1ull << xs->esb_shift) * ICS_BASE(xs)->nr_irqs); > + > qemu_register_reset(xive_ics_reset, xs); > } > > static Property xive_ics_properties[] = { > DEFINE_PROP_UINT32("nr-irqs", ICSState, nr_irqs, 0), > DEFINE_PROP_UINT32("irq-base", ICSState, offset, 0), > + DEFINE_PROP_UINT32("shift", XiveICSState, esb_shift, 0), > DEFINE_PROP_END_OF_LIST(), > }; > > diff --git a/include/hw/ppc/xive.h b/include/hw/ppc/xive.h > index 544cc6e0c796..5303d96f5f59 100644 > --- a/include/hw/ppc/xive.h > +++ b/include/hw/ppc/xive.h > @@ -33,6 +33,9 @@ typedef struct XiveICSState XiveICSState; > struct XiveICSState { > ICSState parent_obj; > > + uint32_t esb_shift; > + MemoryRegion esb_iomem; > + > XIVE *xive; > }; >
On 06/07/17 03:13, Cédric Le Goater wrote: > Each interrupt source is associated with a 2-bit state machine called > an Event State Buffer (ESB). It is controlled by MMIO to trigger > events. > > See code for more details on the states. > > Signed-off-by: Cédric Le Goater <clg@kaod.org> > --- > hw/intc/xive.c | 230 ++++++++++++++++++++++++++++++++++++++++++++++++++ > include/hw/ppc/xive.h | 3 + > 2 files changed, 233 insertions(+) > > diff --git a/hw/intc/xive.c b/hw/intc/xive.c > index 9ff14c0da595..816031b8ac81 100644 > --- a/hw/intc/xive.c > +++ b/hw/intc/xive.c > @@ -32,6 +32,226 @@ static void xive_icp_irq(XiveICSState *xs, int lisn) > } > > /* > + * "magic" Event State Buffer (ESB) MMIO offsets. > + * > + * Each interrupt source has a 2-bit state machine called ESB > + * which can be controlled by MMIO. It's made of 2 bits, P and > + * Q. P indicates that an interrupt is pending (has been sent > + * to a queue and is waiting for an EOI). Q indicates that the > + * interrupt has been triggered while pending. > + * > + * This acts as a coalescing mechanism in order to guarantee > + * that a given interrupt only occurs at most once in a queue. > + * > + * When doing an EOI, the Q bit will indicate if the interrupt > + * needs to be re-triggered. > + * > + * The following offsets into the ESB MMIO allow to read or > + * manipulate the PQ bits. They must be used with an 8-bytes > + * load instruction. They all return the previous state of the > + * interrupt (atomically). > + * > + * Additionally, some ESB pages support doing an EOI via a > + * store at 0 and some ESBs support doing a trigger via a > + * separate trigger page. > + */ > +#define XIVE_ESB_GET 0x800 > +#define XIVE_ESB_SET_PQ_00 0xc00 > +#define XIVE_ESB_SET_PQ_01 0xd00 > +#define XIVE_ESB_SET_PQ_10 0xe00 > +#define XIVE_ESB_SET_PQ_11 0xf00 > + > +#define XIVE_ESB_VAL_P 0x2 > +#define XIVE_ESB_VAL_Q 0x1 These are not used. I'd suggest defining the states below using these two. > + > +#define XIVE_ESB_RESET 0x0 > +#define XIVE_ESB_PENDING 0x2 > +#define XIVE_ESB_QUEUED 0x3 > +#define XIVE_ESB_OFF 0x1 > + > +static uint8_t xive_pq_get(XIVE *x, uint32_t lisn) > +{ > + uint32_t idx = lisn; > + uint32_t byte = idx / 4; > + uint32_t bit = (idx % 4) * 2; > + uint8_t* pqs = (uint8_t *) x->sbe; > + > + return (pqs[byte] >> bit) & 0x3; > +} > + > +static void xive_pq_set(XIVE *x, uint32_t lisn, uint8_t pq) > +{ > + uint32_t idx = lisn; > + uint32_t byte = idx / 4; > + uint32_t bit = (idx % 4) * 2; > + uint8_t* pqs = (uint8_t *) x->sbe; > + > + pqs[byte] &= ~(0x3 << bit); > + pqs[byte] |= (pq & 0x3) << bit; > +} > + > +static bool xive_pq_eoi(XIVE *x, uint32_t lisn) Should not it return uint8_t as well (like xive_pq_get() does)? The value than returned from .read() is uint64_t (a binary value).
On Mon, 2017-07-24 at 14:29 +1000, David Gibson wrote: > > + case XIVE_ESB_SET_PQ_00: > > + case XIVE_ESB_SET_PQ_01: > > + case XIVE_ESB_SET_PQ_10: > > + case XIVE_ESB_SET_PQ_11: > > + ret = xive_pq_get(x, lisn); > > + xive_pq_set(x, lisn, (offset >> 8) & 0x3); > > Again I'd prefer xive_pq_set() return the old value itself, for more > obvious atomicity. Agreed. That will also help with StoreEOI (store to 0x400 of the EOI page) which does an EOI then re-sends an interrupt if the old value was 11 (while the load EOI doesn't resend). Cheers, Ben.
On 07/24/2017 08:50 AM, Alexey Kardashevskiy wrote: > On 06/07/17 03:13, Cédric Le Goater wrote: >> Each interrupt source is associated with a 2-bit state machine called >> an Event State Buffer (ESB). It is controlled by MMIO to trigger >> events. >> >> See code for more details on the states. >> >> Signed-off-by: Cédric Le Goater <clg@kaod.org> >> --- >> hw/intc/xive.c | 230 ++++++++++++++++++++++++++++++++++++++++++++++++++ >> include/hw/ppc/xive.h | 3 + >> 2 files changed, 233 insertions(+) >> >> diff --git a/hw/intc/xive.c b/hw/intc/xive.c >> index 9ff14c0da595..816031b8ac81 100644 >> --- a/hw/intc/xive.c >> +++ b/hw/intc/xive.c >> @@ -32,6 +32,226 @@ static void xive_icp_irq(XiveICSState *xs, int lisn) >> } >> >> /* >> + * "magic" Event State Buffer (ESB) MMIO offsets. >> + * >> + * Each interrupt source has a 2-bit state machine called ESB >> + * which can be controlled by MMIO. It's made of 2 bits, P and >> + * Q. P indicates that an interrupt is pending (has been sent >> + * to a queue and is waiting for an EOI). Q indicates that the >> + * interrupt has been triggered while pending. >> + * >> + * This acts as a coalescing mechanism in order to guarantee >> + * that a given interrupt only occurs at most once in a queue. >> + * >> + * When doing an EOI, the Q bit will indicate if the interrupt >> + * needs to be re-triggered. >> + * >> + * The following offsets into the ESB MMIO allow to read or >> + * manipulate the PQ bits. They must be used with an 8-bytes >> + * load instruction. They all return the previous state of the >> + * interrupt (atomically). >> + * >> + * Additionally, some ESB pages support doing an EOI via a >> + * store at 0 and some ESBs support doing a trigger via a >> + * separate trigger page. >> + */ >> +#define XIVE_ESB_GET 0x800 >> +#define XIVE_ESB_SET_PQ_00 0xc00 >> +#define XIVE_ESB_SET_PQ_01 0xd00 >> +#define XIVE_ESB_SET_PQ_10 0xe00 >> +#define XIVE_ESB_SET_PQ_11 0xf00 >> + >> +#define XIVE_ESB_VAL_P 0x2 >> +#define XIVE_ESB_VAL_Q 0x1 > > > These are not used. I'd suggest defining the states below using these two. yes. I will add a VAL_PQ also. > >> + >> +#define XIVE_ESB_RESET 0x0 >> +#define XIVE_ESB_PENDING 0x2 >> +#define XIVE_ESB_QUEUED 0x3 >> +#define XIVE_ESB_OFF 0x1 >> + >> +static uint8_t xive_pq_get(XIVE *x, uint32_t lisn) >> +{ >> + uint32_t idx = lisn; >> + uint32_t byte = idx / 4; >> + uint32_t bit = (idx % 4) * 2; >> + uint8_t* pqs = (uint8_t *) x->sbe; >> + >> + return (pqs[byte] >> bit) & 0x3; >> +} >> + >> +static void xive_pq_set(XIVE *x, uint32_t lisn, uint8_t pq) >> +{ >> + uint32_t idx = lisn; >> + uint32_t byte = idx / 4; >> + uint32_t bit = (idx % 4) * 2; >> + uint8_t* pqs = (uint8_t *) x->sbe; >> + >> + pqs[byte] &= ~(0x3 << bit); >> + pqs[byte] |= (pq & 0x3) << bit; >> +} >> + >> +static bool xive_pq_eoi(XIVE *x, uint32_t lisn) > > > Should not it return uint8_t as well (like xive_pq_get() does)? The value > than returned from .read() is uint64_t (a binary value). Yes. The bool only reflects the state machine specs but we can change that in the code. Thanks, C.
On 07/24/2017 06:29 AM, David Gibson wrote: > On Wed, Jul 05, 2017 at 07:13:20PM +0200, Cédric Le Goater wrote: >> Each interrupt source is associated with a 2-bit state machine called >> an Event State Buffer (ESB). It is controlled by MMIO to trigger >> events. >> >> See code for more details on the states. >> >> Signed-off-by: Cédric Le Goater <clg@kaod.org> >> --- >> hw/intc/xive.c | 230 ++++++++++++++++++++++++++++++++++++++++++++++++++ >> include/hw/ppc/xive.h | 3 + >> 2 files changed, 233 insertions(+) >> >> diff --git a/hw/intc/xive.c b/hw/intc/xive.c >> index 9ff14c0da595..816031b8ac81 100644 >> --- a/hw/intc/xive.c >> +++ b/hw/intc/xive.c >> @@ -32,6 +32,226 @@ static void xive_icp_irq(XiveICSState *xs, int lisn) >> } >> >> /* >> + * "magic" Event State Buffer (ESB) MMIO offsets. >> + * >> + * Each interrupt source has a 2-bit state machine called ESB >> + * which can be controlled by MMIO. It's made of 2 bits, P and >> + * Q. P indicates that an interrupt is pending (has been sent >> + * to a queue and is waiting for an EOI). Q indicates that the >> + * interrupt has been triggered while pending. >> + * >> + * This acts as a coalescing mechanism in order to guarantee >> + * that a given interrupt only occurs at most once in a queue. >> + * >> + * When doing an EOI, the Q bit will indicate if the interrupt >> + * needs to be re-triggered. >> + * >> + * The following offsets into the ESB MMIO allow to read or >> + * manipulate the PQ bits. They must be used with an 8-bytes >> + * load instruction. They all return the previous state of the >> + * interrupt (atomically). >> + * >> + * Additionally, some ESB pages support doing an EOI via a >> + * store at 0 and some ESBs support doing a trigger via a >> + * separate trigger page. >> + */ >> +#define XIVE_ESB_GET 0x800 >> +#define XIVE_ESB_SET_PQ_00 0xc00 >> +#define XIVE_ESB_SET_PQ_01 0xd00 >> +#define XIVE_ESB_SET_PQ_10 0xe00 >> +#define XIVE_ESB_SET_PQ_11 0xf00 >> + >> +#define XIVE_ESB_VAL_P 0x2 >> +#define XIVE_ESB_VAL_Q 0x1 >> + >> +#define XIVE_ESB_RESET 0x0 >> +#define XIVE_ESB_PENDING 0x2 >> +#define XIVE_ESB_QUEUED 0x3 >> +#define XIVE_ESB_OFF 0x1 >> + >> +static uint8_t xive_pq_get(XIVE *x, uint32_t lisn) >> +{ >> + uint32_t idx = lisn; >> + uint32_t byte = idx / 4; >> + uint32_t bit = (idx % 4) * 2; >> + uint8_t* pqs = (uint8_t *) x->sbe; >> + >> + return (pqs[byte] >> bit) & 0x3; >> +} >> + >> +static void xive_pq_set(XIVE *x, uint32_t lisn, uint8_t pq) >> +{ >> + uint32_t idx = lisn; >> + uint32_t byte = idx / 4; >> + uint32_t bit = (idx % 4) * 2; >> + uint8_t* pqs = (uint8_t *) x->sbe; >> + >> + pqs[byte] &= ~(0x3 << bit); >> + pqs[byte] |= (pq & 0x3) << bit; > > I know it probably amounts to the same thing given the context, but > I'd be more comfortable with a temporary and an obviously atomic > update than two writes to the real state variable. yes. I will look better. >> +} >> + >> +static bool xive_pq_eoi(XIVE *x, uint32_t lisn) >> +{ >> + uint8_t old_pq = xive_pq_get(x, lisn); >> + >> + switch (old_pq) { >> + case XIVE_ESB_RESET: >> + xive_pq_set(x, lisn, XIVE_ESB_RESET); >> + return false; >> + case XIVE_ESB_PENDING: >> + xive_pq_set(x, lisn, XIVE_ESB_RESET); >> + return false; >> + case XIVE_ESB_QUEUED: >> + xive_pq_set(x, lisn, XIVE_ESB_PENDING); >> + return true; >> + case XIVE_ESB_OFF: >> + xive_pq_set(x, lisn, XIVE_ESB_OFF); >> + return false; >> + default: >> + g_assert_not_reached(); >> + } >> +} >> + >> +static bool xive_pq_trigger(XIVE *x, uint32_t lisn) >> +{ >> + uint8_t old_pq = xive_pq_get(x, lisn); >> + >> + switch (old_pq) { >> + case XIVE_ESB_RESET: >> + xive_pq_set(x, lisn, XIVE_ESB_PENDING); >> + return true; >> + case XIVE_ESB_PENDING: >> + xive_pq_set(x, lisn, XIVE_ESB_QUEUED); >> + return true; >> + case XIVE_ESB_QUEUED: >> + xive_pq_set(x, lisn, XIVE_ESB_QUEUED); >> + return true; >> + case XIVE_ESB_OFF: >> + xive_pq_set(x, lisn, XIVE_ESB_OFF); >> + return false; >> + default: >> + g_assert_not_reached(); >> + } >> +} >> + >> +/* >> + * XIVE Interrupt Source MMIOs >> + */ >> +static void xive_ics_eoi(XiveICSState *xs, uint32_t srcno) >> +{ >> + ICSIRQState *irq = &ICS_BASE(xs)->irqs[srcno]; >> + >> + if (irq->flags & XICS_FLAGS_IRQ_LSI) { >> + irq->status &= ~XICS_STATUS_SENT; >> + } >> +} >> + >> +/* TODO: handle second page */ > > Is this comment still relevent? Some HW have a second page to trigger the event. I am not sure we need to model it though. I will make some inquiries. >> +static uint64_t xive_esb_read(void *opaque, hwaddr addr, unsigned size) >> +{ >> + XiveICSState *xs = ICS_XIVE(opaque); >> + XIVE *x = xs->xive; >> + uint32_t offset = addr & 0xF00; >> + uint32_t srcno = addr >> xs->esb_shift; >> + uint32_t lisn = srcno + ICS_BASE(xs)->offset; >> + XiveIVE *ive; >> + uint64_t ret = -1; >> + >> + ive = xive_get_ive(x, lisn); >> + if (!ive || !(ive->w & IVE_VALID)) { >> + qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid LISN %d\n", lisn); >> + goto out; >> + } >> + >> + if (srcno >= ICS_BASE(xs)->nr_irqs) { >> + qemu_log_mask(LOG_GUEST_ERROR, >> + "XIVE: invalid IRQ number: %d/%d lisn: %d\n", >> + srcno, ICS_BASE(xs)->nr_irqs, lisn); >> + goto out; >> + } >> + >> + switch (offset) { >> + case 0: >> + xive_ics_eoi(xs, srcno); >> + >> + /* return TRUE or FALSE depending on PQ value */ >> + ret = xive_pq_eoi(x, lisn); >> + break; >> + >> + case XIVE_ESB_GET: >> + ret = xive_pq_get(x, lisn); >> + break; >> + >> + case XIVE_ESB_SET_PQ_00: >> + case XIVE_ESB_SET_PQ_01: >> + case XIVE_ESB_SET_PQ_10: >> + case XIVE_ESB_SET_PQ_11: >> + ret = xive_pq_get(x, lisn); >> + xive_pq_set(x, lisn, (offset >> 8) & 0x3); > > Again I'd prefer xive_pq_set() return the old value itself, for more > obvious atomicity. yes. ok. > >> + break; >> + default: >> + qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid ESB addr %d\n", offset); >> + } >> + >> +out: >> + return ret; >> +} >> + >> +static void xive_esb_write(void *opaque, hwaddr addr, >> + uint64_t value, unsigned size) >> +{ >> + XiveICSState *xs = ICS_XIVE(opaque); >> + XIVE *x = xs->xive; >> + uint32_t offset = addr & 0xF00; >> + uint32_t srcno = addr >> xs->esb_shift; >> + uint32_t lisn = srcno + ICS_BASE(xs)->offset; >> + XiveIVE *ive; >> + bool notify = false; >> + >> + ive = xive_get_ive(x, lisn); >> + if (!ive || !(ive->w & IVE_VALID)) { >> + qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid LISN %d\n", lisn); >> + return; >> + } > > Having this code associated with the individual ICS look directly at > the IVE table in the core xive object seems a bit dubious. The IVE table holds the validity and mask status of the interrupt entries, so we need that lookup. However, (continues below) ... > This also > points out another mismatch between the re-used ICS code and the new > XIVE code: ICS gathers all the per-source-irq flags/state into the > irqstate structure, whereas xive has per-irq information in the > centralized ecb and IVE tables. There can certainly be good reasons > for that, but using both at once is kind of clunky. I understand that you would rather put the esbs in the source they belong to. That is the case on real HW but it makes the modeling a bit more difficult. We would need to choose a MMIO address to give to the guest OS. I had some issues with the allocator (I need to look at this problem closer). It might also be an "issue" for KVM. Ben talked about maintaining all the esbs of a guest under a single memory region to be able to map the pages in the host. Any how, I agree this is another point to discuss in the sPAPR model. Thanks, C. >> + if (srcno >= ICS_BASE(xs)->nr_irqs) { >> + qemu_log_mask(LOG_GUEST_ERROR, >> + "XIVE: invalid IRQ number: %d/%d lisn: %d\n", >> + srcno, ICS_BASE(xs)->nr_irqs, lisn); >> + return; >> + } >> + >> + switch (offset) { >> + case 0: >> + /* TODO: should we trigger even if the IVE is masked ? */ >> + notify = xive_pq_trigger(x, lisn); >> + break; >> + default: >> + qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid ESB write addr %d\n", >> + offset); >> + return; >> + } >> + >> + if (notify && !(ive->w & IVE_MASKED)) { >> + qemu_irq_pulse(ICS_BASE(xs)->qirqs[srcno]); >> + } >> +} >> + >> +static const MemoryRegionOps xive_esb_ops = { >> + .read = xive_esb_read, >> + .write = xive_esb_write, >> + .endianness = DEVICE_BIG_ENDIAN, >> + .valid = { >> + .min_access_size = 8, >> + .max_access_size = 8, >> + }, >> + .impl = { >> + .min_access_size = 8, >> + .max_access_size = 8, >> + }, >> +}; >> + >> +/* >> * XIVE Interrupt Source >> */ >> static void xive_ics_set_irq_msi(XiveICSState *xs, int srcno, int val) >> @@ -106,15 +326,25 @@ static void xive_ics_realize(ICSState *ics, Error **errp) >> return; >> } >> >> + if (!xs->esb_shift) { >> + error_setg(errp, "ESB page size needs to be greater 0"); >> + return; >> + } >> + >> ics->irqs = g_malloc0(ics->nr_irqs * sizeof(ICSIRQState)); >> ics->qirqs = qemu_allocate_irqs(xive_ics_set_irq, xs, ics->nr_irqs); >> >> + memory_region_init_io(&xs->esb_iomem, OBJECT(xs), &xive_esb_ops, xs, >> + "xive.esb", >> + (1ull << xs->esb_shift) * ICS_BASE(xs)->nr_irqs); >> + >> qemu_register_reset(xive_ics_reset, xs); >> } >> >> static Property xive_ics_properties[] = { >> DEFINE_PROP_UINT32("nr-irqs", ICSState, nr_irqs, 0), >> DEFINE_PROP_UINT32("irq-base", ICSState, offset, 0), >> + DEFINE_PROP_UINT32("shift", XiveICSState, esb_shift, 0), >> DEFINE_PROP_END_OF_LIST(), >> }; >> >> diff --git a/include/hw/ppc/xive.h b/include/hw/ppc/xive.h >> index 544cc6e0c796..5303d96f5f59 100644 >> --- a/include/hw/ppc/xive.h >> +++ b/include/hw/ppc/xive.h >> @@ -33,6 +33,9 @@ typedef struct XiveICSState XiveICSState; >> struct XiveICSState { >> ICSState parent_obj; >> >> + uint32_t esb_shift; >> + MemoryRegion esb_iomem; >> + >> XIVE *xive; >> }; >> >
On Mon, Jul 24, 2017 at 05:55:42PM +0200, Cédric Le Goater wrote: > On 07/24/2017 06:29 AM, David Gibson wrote: > > On Wed, Jul 05, 2017 at 07:13:20PM +0200, Cédric Le Goater wrote: > >> Each interrupt source is associated with a 2-bit state machine called > >> an Event State Buffer (ESB). It is controlled by MMIO to trigger > >> events. [snip] > >> +/* TODO: handle second page */ > > > > Is this comment still relevent? > > Some HW have a second page to trigger the event. I am not sure we need > to model it though. I will make some inquiries. Ah, ok. Maybe clarify the comment a bit. [snip] > >> +static void xive_esb_write(void *opaque, hwaddr addr, > >> + uint64_t value, unsigned size) > >> +{ > >> + XiveICSState *xs = ICS_XIVE(opaque); > >> + XIVE *x = xs->xive; > >> + uint32_t offset = addr & 0xF00; > >> + uint32_t srcno = addr >> xs->esb_shift; > >> + uint32_t lisn = srcno + ICS_BASE(xs)->offset; > >> + XiveIVE *ive; > >> + bool notify = false; > >> + > >> + ive = xive_get_ive(x, lisn); > >> + if (!ive || !(ive->w & IVE_VALID)) { > >> + qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid LISN %d\n", lisn); > >> + return; > >> + } > > > > Having this code associated with the individual ICS look directly at > > the IVE table in the core xive object seems a bit dubious. > > The IVE table holds the validity and mask status of the interrupt > entries, so we need that lookup. However, (continues below) ... > > > This also > > points out another mismatch between the re-used ICS code and the new > > XIVE code: ICS gathers all the per-source-irq flags/state into the > > irqstate structure, whereas xive has per-irq information in the > > centralized ecb and IVE tables. There can certainly be good reasons > > for that, but using both at once is kind of clunky. > > I understand that you would rather put the esbs in the source they > belong to. That is the case on real HW but it makes the modeling a > bit more difficult. We would need to choose a MMIO address to give > to the guest OS. I had some issues with the allocator (I need > to look at this problem closer). Uh.. what do MMIO addresses have to do with this? I'm talking about the actual ESB state in the packed bit array. > It might also be an "issue" for KVM. Ben talked about maintaining > all the esbs of a guest under a single memory region to be able to > map the pages in the host. > > Any how, I agree this is another point to discuss in the sPAPR > model. > > Thanks, > > C. > > > >> + if (srcno >= ICS_BASE(xs)->nr_irqs) { > >> + qemu_log_mask(LOG_GUEST_ERROR, > >> + "XIVE: invalid IRQ number: %d/%d lisn: %d\n", > >> + srcno, ICS_BASE(xs)->nr_irqs, lisn); > >> + return; > >> + } > >> + > >> + switch (offset) { > >> + case 0: > >> + /* TODO: should we trigger even if the IVE is masked ? */ > >> + notify = xive_pq_trigger(x, lisn); > >> + break; > >> + default: > >> + qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid ESB write addr %d\n", > >> + offset); > >> + return; > >> + } > >> + > >> + if (notify && !(ive->w & IVE_MASKED)) { > >> + qemu_irq_pulse(ICS_BASE(xs)->qirqs[srcno]); > >> + } > >> +} > >> + > >> +static const MemoryRegionOps xive_esb_ops = { > >> + .read = xive_esb_read, > >> + .write = xive_esb_write, > >> + .endianness = DEVICE_BIG_ENDIAN, > >> + .valid = { > >> + .min_access_size = 8, > >> + .max_access_size = 8, > >> + }, > >> + .impl = { > >> + .min_access_size = 8, > >> + .max_access_size = 8, > >> + }, > >> +}; > >> + > >> +/* > >> * XIVE Interrupt Source > >> */ > >> static void xive_ics_set_irq_msi(XiveICSState *xs, int srcno, int val) > >> @@ -106,15 +326,25 @@ static void xive_ics_realize(ICSState *ics, Error **errp) > >> return; > >> } > >> > >> + if (!xs->esb_shift) { > >> + error_setg(errp, "ESB page size needs to be greater 0"); > >> + return; > >> + } > >> + > >> ics->irqs = g_malloc0(ics->nr_irqs * sizeof(ICSIRQState)); > >> ics->qirqs = qemu_allocate_irqs(xive_ics_set_irq, xs, ics->nr_irqs); > >> > >> + memory_region_init_io(&xs->esb_iomem, OBJECT(xs), &xive_esb_ops, xs, > >> + "xive.esb", > >> + (1ull << xs->esb_shift) * ICS_BASE(xs)->nr_irqs); > >> + > >> qemu_register_reset(xive_ics_reset, xs); > >> } > >> > >> static Property xive_ics_properties[] = { > >> DEFINE_PROP_UINT32("nr-irqs", ICSState, nr_irqs, 0), > >> DEFINE_PROP_UINT32("irq-base", ICSState, offset, 0), > >> + DEFINE_PROP_UINT32("shift", XiveICSState, esb_shift, 0), > >> DEFINE_PROP_END_OF_LIST(), > >> }; > >> > >> diff --git a/include/hw/ppc/xive.h b/include/hw/ppc/xive.h > >> index 544cc6e0c796..5303d96f5f59 100644 > >> --- a/include/hw/ppc/xive.h > >> +++ b/include/hw/ppc/xive.h > >> @@ -33,6 +33,9 @@ typedef struct XiveICSState XiveICSState; > >> struct XiveICSState { > >> ICSState parent_obj; > >> > >> + uint32_t esb_shift; > >> + MemoryRegion esb_iomem; > >> + > >> XIVE *xive; > >> }; > >> > > >
On 07/25/2017 02:21 PM, David Gibson wrote: > On Mon, Jul 24, 2017 at 05:55:42PM +0200, Cédric Le Goater wrote: >> On 07/24/2017 06:29 AM, David Gibson wrote: >>> On Wed, Jul 05, 2017 at 07:13:20PM +0200, Cédric Le Goater wrote: >>>> Each interrupt source is associated with a 2-bit state machine called >>>> an Event State Buffer (ESB). It is controlled by MMIO to trigger >>>> events. > [snip] >>>> +/* TODO: handle second page */ >>> >>> Is this comment still relevent? >> >> Some HW have a second page to trigger the event. I am not sure we need >> to model it though. I will make some inquiries. > > Ah, ok. Maybe clarify the comment a bit. > > [snip] >>>> +static void xive_esb_write(void *opaque, hwaddr addr, >>>> + uint64_t value, unsigned size) >>>> +{ >>>> + XiveICSState *xs = ICS_XIVE(opaque); >>>> + XIVE *x = xs->xive; >>>> + uint32_t offset = addr & 0xF00; >>>> + uint32_t srcno = addr >> xs->esb_shift; >>>> + uint32_t lisn = srcno + ICS_BASE(xs)->offset; >>>> + XiveIVE *ive; >>>> + bool notify = false; >>>> + >>>> + ive = xive_get_ive(x, lisn); >>>> + if (!ive || !(ive->w & IVE_VALID)) { >>>> + qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid LISN %d\n", lisn); >>>> + return; >>>> + } >>> >>> Having this code associated with the individual ICS look directly at >>> the IVE table in the core xive object seems a bit dubious. >> >> The IVE table holds the validity and mask status of the interrupt >> entries, so we need that lookup. However, (continues below) ... >> >>> This also >>> points out another mismatch between the re-used ICS code and the new >>> XIVE code: ICS gathers all the per-source-irq flags/state into the >>> irqstate structure, whereas xive has per-irq information in the >>> centralized ecb and IVE tables. There can certainly be good reasons >>> for that, but using both at once is kind of clunky. >> >> I understand that you would rather put the esbs in the source they >> belong to. That is the case on real HW but it makes the modeling a >> bit more difficult. We would need to choose a MMIO address to give >> to the guest OS. I had some issues with the allocator (I need >> to look at this problem closer). > > Uh.. what do MMIO addresses have to do with this? I'm talking about > the actual ESB state in the packed bit array. To ease the modeling, the ESB states of all IRQs are under the same bit array and they are exposed to the guest OS through a single memory region so that all accesses to the ESB states are centralized. On real HW, the ESB cache and the MMIO base depends on the source. Anyway, that might not be an issue. I will see what I can do to decorrelate the XIVE source from the main XIVE object. We can probably move the ESB state array below the XIVE source. C. >> It might also be an "issue" for KVM. Ben talked about maintaining >> all the esbs of a guest under a single memory region to be able to >> map the pages in the host. >> >> Any how, I agree this is another point to discuss in the sPAPR >> model. >> >> Thanks, >> >> C. >> >> >>>> + if (srcno >= ICS_BASE(xs)->nr_irqs) { >>>> + qemu_log_mask(LOG_GUEST_ERROR, >>>> + "XIVE: invalid IRQ number: %d/%d lisn: %d\n", >>>> + srcno, ICS_BASE(xs)->nr_irqs, lisn); >>>> + return; >>>> + } >>>> + >>>> + switch (offset) { >>>> + case 0: >>>> + /* TODO: should we trigger even if the IVE is masked ? */ >>>> + notify = xive_pq_trigger(x, lisn); >>>> + break; >>>> + default: >>>> + qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid ESB write addr %d\n", >>>> + offset); >>>> + return; >>>> + } >>>> + >>>> + if (notify && !(ive->w & IVE_MASKED)) { >>>> + qemu_irq_pulse(ICS_BASE(xs)->qirqs[srcno]); >>>> + } >>>> +} >>>> + >>>> +static const MemoryRegionOps xive_esb_ops = { >>>> + .read = xive_esb_read, >>>> + .write = xive_esb_write, >>>> + .endianness = DEVICE_BIG_ENDIAN, >>>> + .valid = { >>>> + .min_access_size = 8, >>>> + .max_access_size = 8, >>>> + }, >>>> + .impl = { >>>> + .min_access_size = 8, >>>> + .max_access_size = 8, >>>> + }, >>>> +}; >>>> + >>>> +/* >>>> * XIVE Interrupt Source >>>> */ >>>> static void xive_ics_set_irq_msi(XiveICSState *xs, int srcno, int val) >>>> @@ -106,15 +326,25 @@ static void xive_ics_realize(ICSState *ics, Error **errp) >>>> return; >>>> } >>>> >>>> + if (!xs->esb_shift) { >>>> + error_setg(errp, "ESB page size needs to be greater 0"); >>>> + return; >>>> + } >>>> + >>>> ics->irqs = g_malloc0(ics->nr_irqs * sizeof(ICSIRQState)); >>>> ics->qirqs = qemu_allocate_irqs(xive_ics_set_irq, xs, ics->nr_irqs); >>>> >>>> + memory_region_init_io(&xs->esb_iomem, OBJECT(xs), &xive_esb_ops, xs, >>>> + "xive.esb", >>>> + (1ull << xs->esb_shift) * ICS_BASE(xs)->nr_irqs); >>>> + >>>> qemu_register_reset(xive_ics_reset, xs); >>>> } >>>> >>>> static Property xive_ics_properties[] = { >>>> DEFINE_PROP_UINT32("nr-irqs", ICSState, nr_irqs, 0), >>>> DEFINE_PROP_UINT32("irq-base", ICSState, offset, 0), >>>> + DEFINE_PROP_UINT32("shift", XiveICSState, esb_shift, 0), >>>> DEFINE_PROP_END_OF_LIST(), >>>> }; >>>> >>>> diff --git a/include/hw/ppc/xive.h b/include/hw/ppc/xive.h >>>> index 544cc6e0c796..5303d96f5f59 100644 >>>> --- a/include/hw/ppc/xive.h >>>> +++ b/include/hw/ppc/xive.h >>>> @@ -33,6 +33,9 @@ typedef struct XiveICSState XiveICSState; >>>> struct XiveICSState { >>>> ICSState parent_obj; >>>> >>>> + uint32_t esb_shift; >>>> + MemoryRegion esb_iomem; >>>> + >>>> XIVE *xive; >>>> }; >>>> >>> >> >
diff --git a/hw/intc/xive.c b/hw/intc/xive.c index 9ff14c0da595..816031b8ac81 100644 --- a/hw/intc/xive.c +++ b/hw/intc/xive.c @@ -32,6 +32,226 @@ static void xive_icp_irq(XiveICSState *xs, int lisn) } /* + * "magic" Event State Buffer (ESB) MMIO offsets. + * + * Each interrupt source has a 2-bit state machine called ESB + * which can be controlled by MMIO. It's made of 2 bits, P and + * Q. P indicates that an interrupt is pending (has been sent + * to a queue and is waiting for an EOI). Q indicates that the + * interrupt has been triggered while pending. + * + * This acts as a coalescing mechanism in order to guarantee + * that a given interrupt only occurs at most once in a queue. + * + * When doing an EOI, the Q bit will indicate if the interrupt + * needs to be re-triggered. + * + * The following offsets into the ESB MMIO allow to read or + * manipulate the PQ bits. They must be used with an 8-bytes + * load instruction. They all return the previous state of the + * interrupt (atomically). + * + * Additionally, some ESB pages support doing an EOI via a + * store at 0 and some ESBs support doing a trigger via a + * separate trigger page. + */ +#define XIVE_ESB_GET 0x800 +#define XIVE_ESB_SET_PQ_00 0xc00 +#define XIVE_ESB_SET_PQ_01 0xd00 +#define XIVE_ESB_SET_PQ_10 0xe00 +#define XIVE_ESB_SET_PQ_11 0xf00 + +#define XIVE_ESB_VAL_P 0x2 +#define XIVE_ESB_VAL_Q 0x1 + +#define XIVE_ESB_RESET 0x0 +#define XIVE_ESB_PENDING 0x2 +#define XIVE_ESB_QUEUED 0x3 +#define XIVE_ESB_OFF 0x1 + +static uint8_t xive_pq_get(XIVE *x, uint32_t lisn) +{ + uint32_t idx = lisn; + uint32_t byte = idx / 4; + uint32_t bit = (idx % 4) * 2; + uint8_t* pqs = (uint8_t *) x->sbe; + + return (pqs[byte] >> bit) & 0x3; +} + +static void xive_pq_set(XIVE *x, uint32_t lisn, uint8_t pq) +{ + uint32_t idx = lisn; + uint32_t byte = idx / 4; + uint32_t bit = (idx % 4) * 2; + uint8_t* pqs = (uint8_t *) x->sbe; + + pqs[byte] &= ~(0x3 << bit); + pqs[byte] |= (pq & 0x3) << bit; +} + +static bool xive_pq_eoi(XIVE *x, uint32_t lisn) +{ + uint8_t old_pq = xive_pq_get(x, lisn); + + switch (old_pq) { + case XIVE_ESB_RESET: + xive_pq_set(x, lisn, XIVE_ESB_RESET); + return false; + case XIVE_ESB_PENDING: + xive_pq_set(x, lisn, XIVE_ESB_RESET); + return false; + case XIVE_ESB_QUEUED: + xive_pq_set(x, lisn, XIVE_ESB_PENDING); + return true; + case XIVE_ESB_OFF: + xive_pq_set(x, lisn, XIVE_ESB_OFF); + return false; + default: + g_assert_not_reached(); + } +} + +static bool xive_pq_trigger(XIVE *x, uint32_t lisn) +{ + uint8_t old_pq = xive_pq_get(x, lisn); + + switch (old_pq) { + case XIVE_ESB_RESET: + xive_pq_set(x, lisn, XIVE_ESB_PENDING); + return true; + case XIVE_ESB_PENDING: + xive_pq_set(x, lisn, XIVE_ESB_QUEUED); + return true; + case XIVE_ESB_QUEUED: + xive_pq_set(x, lisn, XIVE_ESB_QUEUED); + return true; + case XIVE_ESB_OFF: + xive_pq_set(x, lisn, XIVE_ESB_OFF); + return false; + default: + g_assert_not_reached(); + } +} + +/* + * XIVE Interrupt Source MMIOs + */ +static void xive_ics_eoi(XiveICSState *xs, uint32_t srcno) +{ + ICSIRQState *irq = &ICS_BASE(xs)->irqs[srcno]; + + if (irq->flags & XICS_FLAGS_IRQ_LSI) { + irq->status &= ~XICS_STATUS_SENT; + } +} + +/* TODO: handle second page */ +static uint64_t xive_esb_read(void *opaque, hwaddr addr, unsigned size) +{ + XiveICSState *xs = ICS_XIVE(opaque); + XIVE *x = xs->xive; + uint32_t offset = addr & 0xF00; + uint32_t srcno = addr >> xs->esb_shift; + uint32_t lisn = srcno + ICS_BASE(xs)->offset; + XiveIVE *ive; + uint64_t ret = -1; + + ive = xive_get_ive(x, lisn); + if (!ive || !(ive->w & IVE_VALID)) { + qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid LISN %d\n", lisn); + goto out; + } + + if (srcno >= ICS_BASE(xs)->nr_irqs) { + qemu_log_mask(LOG_GUEST_ERROR, + "XIVE: invalid IRQ number: %d/%d lisn: %d\n", + srcno, ICS_BASE(xs)->nr_irqs, lisn); + goto out; + } + + switch (offset) { + case 0: + xive_ics_eoi(xs, srcno); + + /* return TRUE or FALSE depending on PQ value */ + ret = xive_pq_eoi(x, lisn); + break; + + case XIVE_ESB_GET: + ret = xive_pq_get(x, lisn); + break; + + case XIVE_ESB_SET_PQ_00: + case XIVE_ESB_SET_PQ_01: + case XIVE_ESB_SET_PQ_10: + case XIVE_ESB_SET_PQ_11: + ret = xive_pq_get(x, lisn); + xive_pq_set(x, lisn, (offset >> 8) & 0x3); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid ESB addr %d\n", offset); + } + +out: + return ret; +} + +static void xive_esb_write(void *opaque, hwaddr addr, + uint64_t value, unsigned size) +{ + XiveICSState *xs = ICS_XIVE(opaque); + XIVE *x = xs->xive; + uint32_t offset = addr & 0xF00; + uint32_t srcno = addr >> xs->esb_shift; + uint32_t lisn = srcno + ICS_BASE(xs)->offset; + XiveIVE *ive; + bool notify = false; + + ive = xive_get_ive(x, lisn); + if (!ive || !(ive->w & IVE_VALID)) { + qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid LISN %d\n", lisn); + return; + } + + if (srcno >= ICS_BASE(xs)->nr_irqs) { + qemu_log_mask(LOG_GUEST_ERROR, + "XIVE: invalid IRQ number: %d/%d lisn: %d\n", + srcno, ICS_BASE(xs)->nr_irqs, lisn); + return; + } + + switch (offset) { + case 0: + /* TODO: should we trigger even if the IVE is masked ? */ + notify = xive_pq_trigger(x, lisn); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid ESB write addr %d\n", + offset); + return; + } + + if (notify && !(ive->w & IVE_MASKED)) { + qemu_irq_pulse(ICS_BASE(xs)->qirqs[srcno]); + } +} + +static const MemoryRegionOps xive_esb_ops = { + .read = xive_esb_read, + .write = xive_esb_write, + .endianness = DEVICE_BIG_ENDIAN, + .valid = { + .min_access_size = 8, + .max_access_size = 8, + }, + .impl = { + .min_access_size = 8, + .max_access_size = 8, + }, +}; + +/* * XIVE Interrupt Source */ static void xive_ics_set_irq_msi(XiveICSState *xs, int srcno, int val) @@ -106,15 +326,25 @@ static void xive_ics_realize(ICSState *ics, Error **errp) return; } + if (!xs->esb_shift) { + error_setg(errp, "ESB page size needs to be greater 0"); + return; + } + ics->irqs = g_malloc0(ics->nr_irqs * sizeof(ICSIRQState)); ics->qirqs = qemu_allocate_irqs(xive_ics_set_irq, xs, ics->nr_irqs); + memory_region_init_io(&xs->esb_iomem, OBJECT(xs), &xive_esb_ops, xs, + "xive.esb", + (1ull << xs->esb_shift) * ICS_BASE(xs)->nr_irqs); + qemu_register_reset(xive_ics_reset, xs); } static Property xive_ics_properties[] = { DEFINE_PROP_UINT32("nr-irqs", ICSState, nr_irqs, 0), DEFINE_PROP_UINT32("irq-base", ICSState, offset, 0), + DEFINE_PROP_UINT32("shift", XiveICSState, esb_shift, 0), DEFINE_PROP_END_OF_LIST(), }; diff --git a/include/hw/ppc/xive.h b/include/hw/ppc/xive.h index 544cc6e0c796..5303d96f5f59 100644 --- a/include/hw/ppc/xive.h +++ b/include/hw/ppc/xive.h @@ -33,6 +33,9 @@ typedef struct XiveICSState XiveICSState; struct XiveICSState { ICSState parent_obj; + uint32_t esb_shift; + MemoryRegion esb_iomem; + XIVE *xive; };
Each interrupt source is associated with a 2-bit state machine called an Event State Buffer (ESB). It is controlled by MMIO to trigger events. See code for more details on the states. Signed-off-by: Cédric Le Goater <clg@kaod.org> --- hw/intc/xive.c | 230 ++++++++++++++++++++++++++++++++++++++++++++++++++ include/hw/ppc/xive.h | 3 + 2 files changed, 233 insertions(+)