Message ID | 20160921180911.32289-1-nathan@nathanrossi.com |
---|---|
State | New |
Headers | show |
On Wed, Sep 21, 2016 at 11:09 AM, Nathan Rossi <nathan@nathanrossi.com> wrote: > Whilst according to the Zynq TRM this device covers a register region of > 0x000 - 0x120. The register region is also shared with XADCIF prefix > registers at 0x100 and above. Due to how the devcfg and the xadc devices > are implemented in QEMU these are separate models with individual mmio > regions. As such the region registered by the devcfg overlaps with the > xadc when initialized in a machine model (e.g. xilinx-zynq-a9). > > This patch fixes up the incorrect region size, where > XLNX_ZYNQ_DEVCFG_R_MAX is missing its '/ 4' causing it to be 0x460 in > size. As well as setting the region size to the 0x0 - 0x100 region so > that an xadc device instance can be registered in the correct region to > pair with the devcfg device instance. > > Mapping with XLNX_ZYNQ_DEVCFG_R_MAX = 0x118: > dev: xlnx.ps7-dev-cfg, id "" > mmio 00000000f8007000/0000000000000460 > dev: xlnx,zynq-xadc, id "" > mmio 00000000f8007100/0000000000000020 > > Mapping with XLNX_ZYNQ_DEVCFG_R_MAX = 0x100 / 4: > dev: xlnx.ps7-dev-cfg, id "" > mmio 00000000f8007000/0000000000000100 > dev: xlnx,zynq-xadc, id "" > mmio 00000000f8007100/0000000000000020 > > Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Good catch. What came up that caused you to find this? Can this go via the target-arm queue Peter? Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Thanks, Alistair > --- > include/hw/dma/xlnx-zynq-devcfg.h | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/include/hw/dma/xlnx-zynq-devcfg.h b/include/hw/dma/xlnx-zynq-devcfg.h > index d40e5c8df6..9f5119a89a 100644 > --- a/include/hw/dma/xlnx-zynq-devcfg.h > +++ b/include/hw/dma/xlnx-zynq-devcfg.h > @@ -34,7 +34,7 @@ > #define XLNX_ZYNQ_DEVCFG(obj) \ > OBJECT_CHECK(XlnxZynqDevcfg, (obj), TYPE_XLNX_ZYNQ_DEVCFG) > > -#define XLNX_ZYNQ_DEVCFG_R_MAX 0x118 > +#define XLNX_ZYNQ_DEVCFG_R_MAX (0x100 / 4) > > #define XLNX_ZYNQ_DEVCFG_DMA_CMD_FIFO_LEN 10 > > -- > 2.9.3 >
On Thu, Sep 22, 2016 at 6:40 AM, Alistair Francis <alistair.francis@xilinx.com> wrote: > On Wed, Sep 21, 2016 at 11:09 AM, Nathan Rossi <nathan@nathanrossi.com> wrote: >> Whilst according to the Zynq TRM this device covers a register region of >> 0x000 - 0x120. The register region is also shared with XADCIF prefix >> registers at 0x100 and above. Due to how the devcfg and the xadc devices >> are implemented in QEMU these are separate models with individual mmio >> regions. As such the region registered by the devcfg overlaps with the >> xadc when initialized in a machine model (e.g. xilinx-zynq-a9). >> >> This patch fixes up the incorrect region size, where >> XLNX_ZYNQ_DEVCFG_R_MAX is missing its '/ 4' causing it to be 0x460 in >> size. As well as setting the region size to the 0x0 - 0x100 region so >> that an xadc device instance can be registered in the correct region to >> pair with the devcfg device instance. >> >> Mapping with XLNX_ZYNQ_DEVCFG_R_MAX = 0x118: >> dev: xlnx.ps7-dev-cfg, id "" >> mmio 00000000f8007000/0000000000000460 >> dev: xlnx,zynq-xadc, id "" >> mmio 00000000f8007100/0000000000000020 >> >> Mapping with XLNX_ZYNQ_DEVCFG_R_MAX = 0x100 / 4: >> dev: xlnx.ps7-dev-cfg, id "" >> mmio 00000000f8007000/0000000000000100 >> dev: xlnx,zynq-xadc, id "" >> mmio 00000000f8007100/0000000000000020 >> >> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> > > Good catch. What came up that caused you to find this? It appeared as a regression on the xilinx-zynq-a9 machine when booting a Linux kernel/device-tree that made use of the xadc. It hangs during kernel boot when it attempts to access the xadc registers. Regards, Nathan > > Can this go via the target-arm queue Peter? > > Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> > > Thanks, > > Alistair > >> --- >> include/hw/dma/xlnx-zynq-devcfg.h | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/include/hw/dma/xlnx-zynq-devcfg.h b/include/hw/dma/xlnx-zynq-devcfg.h >> index d40e5c8df6..9f5119a89a 100644 >> --- a/include/hw/dma/xlnx-zynq-devcfg.h >> +++ b/include/hw/dma/xlnx-zynq-devcfg.h >> @@ -34,7 +34,7 @@ >> #define XLNX_ZYNQ_DEVCFG(obj) \ >> OBJECT_CHECK(XlnxZynqDevcfg, (obj), TYPE_XLNX_ZYNQ_DEVCFG) >> >> -#define XLNX_ZYNQ_DEVCFG_R_MAX 0x118 >> +#define XLNX_ZYNQ_DEVCFG_R_MAX (0x100 / 4) >> >> #define XLNX_ZYNQ_DEVCFG_DMA_CMD_FIFO_LEN 10 >> >> -- >> 2.9.3 >>
On 21 September 2016 at 21:40, Alistair Francis <alistair.francis@xilinx.com> wrote: > On Wed, Sep 21, 2016 at 11:09 AM, Nathan Rossi <nathan@nathanrossi.com> wrote: >> Whilst according to the Zynq TRM this device covers a register region of >> 0x000 - 0x120. The register region is also shared with XADCIF prefix >> registers at 0x100 and above. Due to how the devcfg and the xadc devices >> are implemented in QEMU these are separate models with individual mmio >> regions. As such the region registered by the devcfg overlaps with the >> xadc when initialized in a machine model (e.g. xilinx-zynq-a9). >> >> This patch fixes up the incorrect region size, where >> XLNX_ZYNQ_DEVCFG_R_MAX is missing its '/ 4' causing it to be 0x460 in >> size. As well as setting the region size to the 0x0 - 0x100 region so >> that an xadc device instance can be registered in the correct region to >> pair with the devcfg device instance. >> >> Mapping with XLNX_ZYNQ_DEVCFG_R_MAX = 0x118: >> dev: xlnx.ps7-dev-cfg, id "" >> mmio 00000000f8007000/0000000000000460 >> dev: xlnx,zynq-xadc, id "" >> mmio 00000000f8007100/0000000000000020 >> >> Mapping with XLNX_ZYNQ_DEVCFG_R_MAX = 0x100 / 4: >> dev: xlnx.ps7-dev-cfg, id "" >> mmio 00000000f8007000/0000000000000100 >> dev: xlnx,zynq-xadc, id "" >> mmio 00000000f8007100/0000000000000020 >> >> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> > > Good catch. What came up that caused you to find this? > > Can this go via the target-arm queue Peter? > > Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Sure; applied to target-arm.next. thanks -- PMM
On Thu, Sep 22, 2016 at 5:19 AM, Nathan Rossi <nathan@nathanrossi.com> wrote: > On Thu, Sep 22, 2016 at 6:40 AM, Alistair Francis > <alistair.francis@xilinx.com> wrote: >> On Wed, Sep 21, 2016 at 11:09 AM, Nathan Rossi <nathan@nathanrossi.com> wrote: >>> Whilst according to the Zynq TRM this device covers a register region of >>> 0x000 - 0x120. The register region is also shared with XADCIF prefix >>> registers at 0x100 and above. Due to how the devcfg and the xadc devices >>> are implemented in QEMU these are separate models with individual mmio >>> regions. As such the region registered by the devcfg overlaps with the >>> xadc when initialized in a machine model (e.g. xilinx-zynq-a9). >>> >>> This patch fixes up the incorrect region size, where >>> XLNX_ZYNQ_DEVCFG_R_MAX is missing its '/ 4' causing it to be 0x460 in >>> size. As well as setting the region size to the 0x0 - 0x100 region so >>> that an xadc device instance can be registered in the correct region to >>> pair with the devcfg device instance. >>> >>> Mapping with XLNX_ZYNQ_DEVCFG_R_MAX = 0x118: >>> dev: xlnx.ps7-dev-cfg, id "" >>> mmio 00000000f8007000/0000000000000460 >>> dev: xlnx,zynq-xadc, id "" >>> mmio 00000000f8007100/0000000000000020 >>> >>> Mapping with XLNX_ZYNQ_DEVCFG_R_MAX = 0x100 / 4: >>> dev: xlnx.ps7-dev-cfg, id "" >>> mmio 00000000f8007000/0000000000000100 >>> dev: xlnx,zynq-xadc, id "" >>> mmio 00000000f8007100/0000000000000020 >>> >>> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> >> >> Good catch. What came up that caused you to find this? > > It appeared as a regression on the xilinx-zynq-a9 machine when booting > a Linux kernel/device-tree that made use of the xadc. It hangs during > kernel boot when it attempts to access the xadc registers. Good catch, thanks for fixing this. Thanks, Alistair > > Regards, > Nathan > >> >> Can this go via the target-arm queue Peter? >> >> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> >> >> Thanks, >> >> Alistair >> >>> --- >>> include/hw/dma/xlnx-zynq-devcfg.h | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/include/hw/dma/xlnx-zynq-devcfg.h b/include/hw/dma/xlnx-zynq-devcfg.h >>> index d40e5c8df6..9f5119a89a 100644 >>> --- a/include/hw/dma/xlnx-zynq-devcfg.h >>> +++ b/include/hw/dma/xlnx-zynq-devcfg.h >>> @@ -34,7 +34,7 @@ >>> #define XLNX_ZYNQ_DEVCFG(obj) \ >>> OBJECT_CHECK(XlnxZynqDevcfg, (obj), TYPE_XLNX_ZYNQ_DEVCFG) >>> >>> -#define XLNX_ZYNQ_DEVCFG_R_MAX 0x118 >>> +#define XLNX_ZYNQ_DEVCFG_R_MAX (0x100 / 4) >>> >>> #define XLNX_ZYNQ_DEVCFG_DMA_CMD_FIFO_LEN 10 >>> >>> -- >>> 2.9.3 >>> >
diff --git a/include/hw/dma/xlnx-zynq-devcfg.h b/include/hw/dma/xlnx-zynq-devcfg.h index d40e5c8df6..9f5119a89a 100644 --- a/include/hw/dma/xlnx-zynq-devcfg.h +++ b/include/hw/dma/xlnx-zynq-devcfg.h @@ -34,7 +34,7 @@ #define XLNX_ZYNQ_DEVCFG(obj) \ OBJECT_CHECK(XlnxZynqDevcfg, (obj), TYPE_XLNX_ZYNQ_DEVCFG) -#define XLNX_ZYNQ_DEVCFG_R_MAX 0x118 +#define XLNX_ZYNQ_DEVCFG_R_MAX (0x100 / 4) #define XLNX_ZYNQ_DEVCFG_DMA_CMD_FIFO_LEN 10
Whilst according to the Zynq TRM this device covers a register region of 0x000 - 0x120. The register region is also shared with XADCIF prefix registers at 0x100 and above. Due to how the devcfg and the xadc devices are implemented in QEMU these are separate models with individual mmio regions. As such the region registered by the devcfg overlaps with the xadc when initialized in a machine model (e.g. xilinx-zynq-a9). This patch fixes up the incorrect region size, where XLNX_ZYNQ_DEVCFG_R_MAX is missing its '/ 4' causing it to be 0x460 in size. As well as setting the region size to the 0x0 - 0x100 region so that an xadc device instance can be registered in the correct region to pair with the devcfg device instance. Mapping with XLNX_ZYNQ_DEVCFG_R_MAX = 0x118: dev: xlnx.ps7-dev-cfg, id "" mmio 00000000f8007000/0000000000000460 dev: xlnx,zynq-xadc, id "" mmio 00000000f8007100/0000000000000020 Mapping with XLNX_ZYNQ_DEVCFG_R_MAX = 0x100 / 4: dev: xlnx.ps7-dev-cfg, id "" mmio 00000000f8007000/0000000000000100 dev: xlnx,zynq-xadc, id "" mmio 00000000f8007100/0000000000000020 Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> --- include/hw/dma/xlnx-zynq-devcfg.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)