From patchwork Tue Nov 27 10:24:19 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Frieder Schrempf X-Patchwork-Id: 1003757 X-Patchwork-Delegate: boris.brezillon@free-electrons.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=lists.infradead.org (client-ip=2607:7c80:54:e::133; helo=bombadil.infradead.org; envelope-from=linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=kontron.de Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="RWvEAcBy"; dkim-atps=neutral Received: from bombadil.infradead.org (bombadil.infradead.org [IPv6:2607:7c80:54:e::133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 4340K54Wjnz9s3Z for ; Tue, 27 Nov 2018 21:24:57 +1100 (AEDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:In-Reply-To:References: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=hprnT4kmm3DxkSGDybi1yH6qlwvP2MzNGn2L+jztrPw=; b=RWvEAcByRaSAiR GEr3uKL5o4dC9fNcG8v85NMAvQvhgaAj8aHEMohkjb/h9lOSG9w2qTfCqJYEcqOHtJj44jDTngP15 rvtowJ9QuAxrTPM5JOWwR46X1d7FQo6/FWMtRfBe5rmhuyx3EXW9aB0+tZ8o4ZanvDvodAKwdEUye ICrWDvvMuDEr0jEdHUSHJXxKtzkGkrEDcBQT/QNbGhjTeHOo2OXhq1HxfGw0ECk1c5oJQmZwFHJie TMnJOn4GrAyJeoyI9FBE7xqY8SzqVU7mvkgBPuf8Tfae0t9MVLVTW71eAJWXnG/kBBF/iOpjg0/dm d57E45xMOBPAhdCditRA==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRaY0-0007n9-CP; Tue, 27 Nov 2018 10:24:52 +0000 Received: from skedge04.snt-world.com ([91.208.41.69]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRaXg-0007PZ-5P; Tue, 27 Nov 2018 10:24:35 +0000 Received: from sntmail12r.snt-is.com (unknown [10.203.32.182]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by skedge04.snt-world.com (Postfix) with ESMTPS id DCF9067A895; Tue, 27 Nov 2018 11:24:19 +0100 (CET) Received: from sntmail12r.snt-is.com (10.203.32.182) by sntmail12r.snt-is.com (10.203.32.182) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1466.3; Tue, 27 Nov 2018 11:24:19 +0100 Received: from sntmail12r.snt-is.com ([fe80::e551:8750:7bba:3305]) by sntmail12r.snt-is.com ([fe80::e551:8750:7bba:3305%5]) with mapi id 15.01.1466.003; Tue, 27 Nov 2018 11:24:19 +0100 From: Schrempf Frieder To: "linux-mtd@lists.infradead.org" , "boris.brezillon@bootlin.com" , "linux-spi@vger.kernel.org" , Shawn Guo , Sascha Hauer , "Pengutronix Kernel Team" , Fabio Estevam , NXP Linux Team , Rob Herring , "Mark Rutland" , Li Yang Subject: [PATCH v6 1/9] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties Thread-Topic: [PATCH v6 1/9] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties Thread-Index: AQHUhjtbWFBD/g7imkCtHxLSenAFww== Date: Tue, 27 Nov 2018 10:24:19 +0000 Message-ID: <1543314174-28580-2-git-send-email-frieder.schrempf@kontron.de> References: <1543314174-28580-1-git-send-email-frieder.schrempf@kontron.de> In-Reply-To: <1543314174-28580-1-git-send-email-frieder.schrempf@kontron.de> Accept-Language: de-DE, en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [172.25.9.43] x-c2processedorg: 51b406b7-48a2-4d03-b652-521f56ac89f3 MIME-Version: 1.0 X-SnT-MailScanner-Information: Please contact the ISP for more information X-SnT-MailScanner-ID: DCF9067A895.AFAE7 X-SnT-MailScanner: Found to be clean X-SnT-MailScanner-SpamCheck: X-SnT-MailScanner-From: frieder.schrempf@kontron.de X-SnT-MailScanner-To: boris.brezillon@bootlin.com, broonie@kernel.org, computersforpeace@gmail.com, david.wolfe@nxp.com, devicetree@vger.kernel.org, dwmw2@infradead.org, fabio.estevam@nxp.com, han.xu@nxp.com, kernel@pengutronix.de, leoyang.li@nxp.com, linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com, linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org, linux-spi@vger.kernel.org, marek.vasut@gmail.com, mark.rutland@arm.com, miquel.raynal@bootlin.com, prabhakar.kushwaha@nxp.com, richard@nod.at, robh+dt@kernel.org, s.hauer@pengutronix.de, shawnguo@kernel.org, yogeshnarayan.gaur@nxp.com X-Spam-Status: No X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20181127_022432_569823_739E62FD X-CRM114-Status: GOOD ( 11.77 ) X-Spam-Score: -0.0 (/) X-Spam-Report: SpamAssassin version 3.4.2 on bombadil.infradead.org summary: Content analysis details: (-0.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no trust [91.208.41.69 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record X-BeenThere: linux-mtd@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: "devicetree@vger.kernel.org" , "yogeshnarayan.gaur@nxp.com" , "richard@nod.at" , "prabhakar.kushwaha@nxp.com" , "linux-kernel@vger.kernel.org" , Schrempf Frieder , "marek.vasut@gmail.com" , "han.xu@nxp.com" , "broonie@kernel.org" , "miquel.raynal@bootlin.com" , "david.wolfe@nxp.com" , "computersforpeace@gmail.com" , "dwmw2@infradead.org" , "linux-arm-kernel@lists.infradead.org" Sender: "linux-mtd" Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org The FSL QSPI driver will be moved to the SPI framework and it then acts as a SPI controller. Therefore the subnodes need to set spi-[rx/tx]-bus-width = <4>, so quad mode is used just as before. Also the properties 'bus-num', 'fsl,spi-num-chipselects' and 'fsl,spi-flash-chipselects' were never read by the driver and can be removed. The 'reg' properties are adjusted to reflect what bus and chipselect the flash is connected to, as the new driver needs this information. The property 'fsl,qspi-has-second-chip' is not needed anymore and will be removed after the old driver was disabled to avoid breaking ls1021a-moxa-uc-8410a.dts. Signed-off-by: Frieder Schrempf --- arch/arm/boot/dts/imx6sx-sdb-reva.dts | 8 ++++++-- arch/arm/boot/dts/imx6sx-sdb.dts | 8 ++++++-- arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 2 ++ arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts | 5 ++--- 4 files changed, 16 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index 9cc6ff2..9997156 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -132,13 +132,17 @@ #size-cells = <1>; compatible = "spansion,s25fl128s", "jedec,spi-nor"; spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; }; - flash1: s25fl128s@1 { - reg = <1>; + flash1: s25fl128s@2 { + reg = <2>; #address-cells = <1>; #size-cells = <1>; compatible = "spansion,s25fl128s", "jedec,spi-nor"; spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; }; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 6dd9beb..9acfda8 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -117,15 +117,19 @@ #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; - flash1: n25q256a@1 { + flash1: n25q256a@2 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; - reg = <1>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + reg = <2>; }; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index 32a0723..c2c9a2a 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -176,6 +176,8 @@ #size-cells = <1>; compatible = "micron,n25q256a"; spi-max-frequency = <29000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; }; diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts index d01f64b..6a83f30 100644 --- a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts +++ b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts @@ -203,9 +203,6 @@ }; &qspi { - bus-num = <0>; - fsl,spi-num-chipselects = <2>; - fsl,spi-flash-chipselects = <0>; fsl,qspi-has-second-chip; status = "okay"; @@ -214,6 +211,8 @@ #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; partitions@0 { From patchwork Tue Nov 27 10:24:21 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Frieder Schrempf X-Patchwork-Id: 1003762 X-Patchwork-Delegate: boris.brezillon@free-electrons.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=lists.infradead.org (client-ip=2607:7c80:54:e::133; helo=bombadil.infradead.org; envelope-from=linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=kontron.de Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="EqaytNcm"; dkim-atps=neutral Received: from bombadil.infradead.org (bombadil.infradead.org [IPv6:2607:7c80:54:e::133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 4340LB1KmCz9s3Z for ; Tue, 27 Nov 2018 21:25:54 +1100 (AEDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:In-Reply-To:References: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=EQIdU3ioraaVelTwiEoBsDbko+klEb3SYNE58jfc4f4=; b=EqaytNcmLRjgw9 9TDwnteSUzOzV8cCeGKv5N4CKohRd9WwckB/w02KfrnSBf158jw97XfbvsZ3UvUg8IiEcxNsScUkj VwVi6O01X5Yv3BPKfQMOv7ybT9zyZhITDW3oj08VVPqzNnlwkdCuBQEsxaeYxWvOS9jjgi9YfH8eH fCOBDf0TY5oPdOuwklyVYiZG3vXexG5jU/xPvWJWg7CxlHPCuQS8kctB/r9MDPvybawwZFjvciFzI y+Lm4aQkO3RR4y8UKtb83rsuDxSenH6fjjLAPNgG4ra7jVJFpQNrNvi6gytiKz3uT6es7pIH7eFrd 3gjBDXOIE2JNXAeYOH6Q==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRaYs-0001UG-KD; Tue, 27 Nov 2018 10:25:46 +0000 Received: from skedge03.snt-world.com ([91.208.41.68]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRaXi-0007RN-9o; Tue, 27 Nov 2018 10:24:44 +0000 Received: from sntmail11s.snt-is.com (unknown [10.203.32.181]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by skedge03.snt-world.com (Postfix) with ESMTPS id 996FC67A7C5; Tue, 27 Nov 2018 11:24:21 +0100 (CET) Received: from sntmail12r.snt-is.com (10.203.32.182) by sntmail11s.snt-is.com (10.203.32.181) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1466.3; Tue, 27 Nov 2018 11:24:21 +0100 Received: from sntmail12r.snt-is.com ([fe80::e551:8750:7bba:3305]) by sntmail12r.snt-is.com ([fe80::e551:8750:7bba:3305%5]) with mapi id 15.01.1466.003; Tue, 27 Nov 2018 11:24:21 +0100 From: Schrempf Frieder To: "linux-mtd@lists.infradead.org" , "boris.brezillon@bootlin.com" , "linux-spi@vger.kernel.org" , Shawn Guo , Li Yang Subject: [PATCH v6 2/9] arm64: dts: Reflect change of FSL QSPI driver and remove unused properties Thread-Topic: [PATCH v6 2/9] arm64: dts: Reflect change of FSL QSPI driver and remove unused properties Thread-Index: AQHUhjtcCtDJEr9rWkyKAamh2l1wPg== Date: Tue, 27 Nov 2018 10:24:21 +0000 Message-ID: <1543314174-28580-3-git-send-email-frieder.schrempf@kontron.de> References: <1543314174-28580-1-git-send-email-frieder.schrempf@kontron.de> In-Reply-To: <1543314174-28580-1-git-send-email-frieder.schrempf@kontron.de> Accept-Language: de-DE, en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [172.25.9.43] x-c2processedorg: 51b406b7-48a2-4d03-b652-521f56ac89f3 MIME-Version: 1.0 X-SnT-MailScanner-Information: Please contact the ISP for more information X-SnT-MailScanner-ID: 996FC67A7C5.AFD1D X-SnT-MailScanner: Found to be clean X-SnT-MailScanner-SpamCheck: X-SnT-MailScanner-From: frieder.schrempf@kontron.de X-SnT-MailScanner-To: boris.brezillon@bootlin.com, broonie@kernel.org, computersforpeace@gmail.com, david.wolfe@nxp.com, devicetree@vger.kernel.org, dwmw2@infradead.org, fabio.estevam@nxp.com, han.xu@nxp.com, leoyang.li@nxp.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org, linux-spi@vger.kernel.org, marek.vasut@gmail.com, mark.rutland@arm.com, miquel.raynal@bootlin.com, prabhakar.kushwaha@nxp.com, richard@nod.at, robh+dt@kernel.org, shawnguo@kernel.org, yogeshnarayan.gaur@nxp.com X-Spam-Status: No X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20181127_022434_813112_B4377CCE X-CRM114-Status: GOOD ( 11.94 ) X-Spam-Score: -0.0 (/) X-Spam-Report: SpamAssassin version 3.4.2 on bombadil.infradead.org summary: Content analysis details: (-0.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no trust [91.208.41.68 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record X-BeenThere: linux-mtd@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Mark Rutland , "devicetree@vger.kernel.org" , "yogeshnarayan.gaur@nxp.com" , Rob Herring , "richard@nod.at" , "prabhakar.kushwaha@nxp.com" , "linux-kernel@vger.kernel.org" , Schrempf Frieder , "marek.vasut@gmail.com" , "han.xu@nxp.com" , "broonie@kernel.org" , "miquel.raynal@bootlin.com" , "fabio.estevam@nxp.com" , "david.wolfe@nxp.com" , "computersforpeace@gmail.com" , "dwmw2@infradead.org" , "linux-arm-kernel@lists.infradead.org" Sender: "linux-mtd" Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org The FSL QSPI driver will be moved to the SPI framework and it then acts as a SPI controller. Therefore the subnodes need to set spi-[rx/tx]-bus-width = <4>, so quad mode is used just as before. Also the properties 'num-cs' and 'bus-num' were never read by the driver and can be removed. The property 'fsl,qspi-has-second-chip' is not needed anymore and will be removed after the old driver was disabled to avoid breaking fsl-ls1046a-rdb.dts. Signed-off-by: Frieder Schrempf --- arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 3 ++- arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts | 4 ++-- arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 6 ++++-- arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 4 ++++ 4 files changed, 12 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts index dff3d64..8a50094 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -135,7 +135,6 @@ }; &qspi { - bus-num = <0>; status = "okay"; qflash0: s25fl128s@0 { @@ -143,6 +142,8 @@ #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index e58a8ca..2f220ec 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -163,8 +163,6 @@ }; &qspi { - num-cs = <2>; - bus-num = <0>; status = "okay"; qflash0: s25fl128s@0 { @@ -172,6 +170,8 @@ #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index a59b482..07c665c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -99,8 +99,6 @@ }; &qspi { - num-cs = <2>; - bus-num = <0>; status = "okay"; qflash0: s25fs512s@0 { @@ -108,6 +106,8 @@ #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; @@ -116,6 +116,8 @@ #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <1>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi index c11f52e..10d2fe0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -134,6 +134,8 @@ #size-cells = <1>; compatible = "st,m25p80"; spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; flash2: s25fl256s1@2 { @@ -141,6 +143,8 @@ #size-cells = <1>; compatible = "st,m25p80"; spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <2>; }; }; From patchwork Tue Nov 27 10:24:24 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Frieder Schrempf X-Patchwork-Id: 1003769 X-Patchwork-Delegate: boris.brezillon@free-electrons.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=lists.infradead.org (client-ip=2607:7c80:54:e::133; helo=bombadil.infradead.org; envelope-from=linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=kontron.de Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="ClB/7L33"; dkim-atps=neutral Received: from bombadil.infradead.org (bombadil.infradead.org [IPv6:2607:7c80:54:e::133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 4340f56Lxxz9s3l for ; Tue, 27 Nov 2018 21:39:41 +1100 (AEDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:In-Reply-To:References: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=rk2DVfLv5avIBEE4ZbOR35M6DsxBaklczXK53Rgi9AI=; b=ClB/7L33ZFVXKD xdhw4Sq3MnIgdGbYJiezSX3EKzcw72EmI5mbh/tde0X4u7inFS4EJYOsj3uBsdPabaExGHwTyN1nr y/uOI+LewkJmmevzJ/7zim5HQRp9YWCoIL7XwtYwNXDGHeTuSXIPZM+hhggcdNj/vxxPksYvRLBW1 49PRXrz/i0rluRzC4/G/f0AM6flpnKSS3Z57O6izrZ4V0cYA0OhlENZ5x+ylITxExN7FRlM4MdeUD j244SmeozmS7smcsw8EK6eBQEPcymYp5O/SrE2+3TEgDHR7uJ1x41rO8eBe66mJeN/eliG2cMgccT KJlwqM0dWm+1hmhPk7MA==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRam7-0001NW-GH; Tue, 27 Nov 2018 10:39:27 +0000 Received: from skedge04.snt-world.com ([91.208.41.69]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRaXg-0007Sv-4n for linux-mtd@lists.infradead.org; Tue, 27 Nov 2018 10:24:43 +0000 Received: from sntmail10s.snt-is.com (unknown [10.203.32.183]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by skedge04.snt-world.com (Postfix) with ESMTPS id 96EE167A87D; Tue, 27 Nov 2018 11:24:25 +0100 (CET) Received: from sntmail12r.snt-is.com (10.203.32.182) by sntmail10s.snt-is.com (10.203.32.183) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1466.3; Tue, 27 Nov 2018 11:24:25 +0100 Received: from sntmail12r.snt-is.com ([fe80::e551:8750:7bba:3305]) by sntmail12r.snt-is.com ([fe80::e551:8750:7bba:3305%5]) with mapi id 15.01.1466.003; Tue, 27 Nov 2018 11:24:25 +0100 From: Schrempf Frieder To: "linux-mtd@lists.infradead.org" , "boris.brezillon@bootlin.com" , "linux-spi@vger.kernel.org" , Marek Vasut , Mark Brown , Han Xu Subject: [PATCH v6 3/9] spi: Add a driver for the Freescale/NXP QuadSPI controller Thread-Topic: [PATCH v6 3/9] spi: Add a driver for the Freescale/NXP QuadSPI controller Thread-Index: AQHUhjte86vILtO4B0icsbZQtceaAg== Date: Tue, 27 Nov 2018 10:24:24 +0000 Message-ID: <1543314174-28580-4-git-send-email-frieder.schrempf@kontron.de> References: <1543314174-28580-1-git-send-email-frieder.schrempf@kontron.de> In-Reply-To: <1543314174-28580-1-git-send-email-frieder.schrempf@kontron.de> Accept-Language: de-DE, en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [172.25.9.43] x-c2processedorg: 51b406b7-48a2-4d03-b652-521f56ac89f3 MIME-Version: 1.0 X-SnT-MailScanner-Information: Please contact the ISP for more information X-SnT-MailScanner-ID: 96EE167A87D.A1F42 X-SnT-MailScanner: Found to be clean X-SnT-MailScanner-SpamCheck: X-SnT-MailScanner-From: frieder.schrempf@kontron.de X-SnT-MailScanner-To: boris.brezillon@bootlin.com, broonie@kernel.org, computersforpeace@gmail.com, david.wolfe@nxp.com, dwmw2@infradead.org, fabio.estevam@nxp.com, han.xu@nxp.com, linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org, linux-spi@vger.kernel.org, marek.vasut@gmail.com, miquel.raynal@bootlin.com, prabhakar.kushwaha@nxp.com, richard@nod.at, shawnguo@kernel.org, yogeshnarayan.gaur@nxp.com X-Spam-Status: No X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20181127_022432_559869_99D209C7 X-CRM114-Status: GOOD ( 23.98 ) X-Spam-Score: -0.0 (/) X-Spam-Report: SpamAssassin version 3.4.2 on bombadil.infradead.org summary: Content analysis details: (-0.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no trust [91.208.41.69 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record X-BeenThere: linux-mtd@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: "yogeshnarayan.gaur@nxp.com" , "richard@nod.at" , "linux-kernel@vger.kernel.org" , "shawnguo@kernel.org" , "prabhakar.kushwaha@nxp.com" , Schrempf Frieder , "miquel.raynal@bootlin.com" , "fabio.estevam@nxp.com" , "david.wolfe@nxp.com" , "computersforpeace@gmail.com" , "dwmw2@infradead.org" Sender: "linux-mtd" Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org This driver is derived from the SPI NOR driver at mtd/spi-nor/fsl-quadspi.c. It uses the new SPI memory interface of the SPI framework to issue flash memory operations to up to four connected flash chips (2 buses with 2 CS each). The controller does not support generic SPI messages. This patch also disables the build of the "old" driver and reuses its Kconfig option CONFIG_SPI_FSL_QUADSPI to replace it. Signed-off-by: Frieder Schrempf --- drivers/mtd/spi-nor/Kconfig | 9 - drivers/mtd/spi-nor/Makefile | 1 - drivers/spi/Kconfig | 11 + drivers/spi/Makefile | 1 + drivers/spi/spi-fsl-qspi.c | 967 ++++++++++++++++++++++++++++++++++++++ 5 files changed, 979 insertions(+), 10 deletions(-) diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig index 6cc9c92..d1ca307 100644 --- a/drivers/mtd/spi-nor/Kconfig +++ b/drivers/mtd/spi-nor/Kconfig @@ -59,15 +59,6 @@ config SPI_CADENCE_QUADSPI device with a Cadence QSPI controller and want to access the Flash as an MTD device. -config SPI_FSL_QUADSPI - tristate "Freescale Quad SPI controller" - depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST - depends on HAS_IOMEM - help - This enables support for the Quad SPI controller in master mode. - This controller does not support generic SPI. It only supports - SPI NOR. - config SPI_HISI_SFC tristate "Hisilicon SPI-NOR Flash Controller(SFC)" depends on ARCH_HISI || COMPILE_TEST diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile index f4c61d2..3f160c2e3 100644 --- a/drivers/mtd/spi-nor/Makefile +++ b/drivers/mtd/spi-nor/Makefile @@ -3,7 +3,6 @@ obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o obj-$(CONFIG_SPI_ASPEED_SMC) += aspeed-smc.o obj-$(CONFIG_SPI_ATMEL_QUADSPI) += atmel-quadspi.o obj-$(CONFIG_SPI_CADENCE_QUADSPI) += cadence-quadspi.o -obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o obj-$(CONFIG_MTD_MT81xx_NOR) += mtk-quadspi.o obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 7d3a5c9..8c84186 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -259,6 +259,17 @@ config SPI_FSL_LPSPI help This enables Freescale i.MX LPSPI controllers in master mode. +config SPI_FSL_QUADSPI + tristate "Freescale QSPI controller" + depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST + depends on HAS_IOMEM + help + This enables support for the Quad SPI controller in master mode. + Up to four flash chips can be connected on two buses with two + chipselects each. + This controller does not support generic SPI messages. It only + supports the high-level SPI memory interface. + config SPI_GPIO tristate "GPIO-based bitbanging SPI Master" depends on GPIOLIB || COMPILE_TEST diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 3575205..5377e61 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_SPI_FSL_DSPI) += spi-fsl-dspi.o obj-$(CONFIG_SPI_FSL_LIB) += spi-fsl-lib.o obj-$(CONFIG_SPI_FSL_ESPI) += spi-fsl-espi.o obj-$(CONFIG_SPI_FSL_LPSPI) += spi-fsl-lpspi.o +obj-$(CONFIG_SPI_FSL_QUADSPI) += spi-fsl-qspi.o obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o obj-$(CONFIG_SPI_GPIO) += spi-gpio.o obj-$(CONFIG_SPI_IMG_SPFI) += spi-img-spfi.o diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c new file mode 100644 index 0000000..b2d4237 --- /dev/null +++ b/drivers/spi/spi-fsl-qspi.c @@ -0,0 +1,967 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/* + * Freescale QuadSPI driver. + * + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * Copyright (C) 2018 Bootlin + * Copyright (C) 2018 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * + * Transition to SPI MEM interface: + * Authors: + * Boris Brezillion + * Frieder Schrempf + * Yogesh Gaur + * Suresh Gupta + * + * Based on the original fsl-quadspi.c spi-nor driver: + * Author: Freescale Semiconductor, Inc. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* + * The driver only uses one single LUT entry, that is updated on + * each call of exec_op(). Index 0 is preset at boot with a basic + * read operation, so let's use the last entry (15). + */ +#define SEQID_LUT 15 + +/* Registers used by the driver */ +#define QUADSPI_MCR 0x00 +#define QUADSPI_MCR_RESERVED_MASK GENMASK(19, 16) +#define QUADSPI_MCR_MDIS_MASK BIT(14) +#define QUADSPI_MCR_CLR_TXF_MASK BIT(11) +#define QUADSPI_MCR_CLR_RXF_MASK BIT(10) +#define QUADSPI_MCR_DDR_EN_MASK BIT(7) +#define QUADSPI_MCR_END_CFG_MASK GENMASK(3, 2) +#define QUADSPI_MCR_SWRSTHD_MASK BIT(1) +#define QUADSPI_MCR_SWRSTSD_MASK BIT(0) + +#define QUADSPI_IPCR 0x08 +#define QUADSPI_IPCR_SEQID(x) ((x) << 24) + +#define QUADSPI_BUF3CR 0x1c +#define QUADSPI_BUF3CR_ALLMST_MASK BIT(31) +#define QUADSPI_BUF3CR_ADATSZ(x) ((x) << 8) +#define QUADSPI_BUF3CR_ADATSZ_MASK GENMASK(15, 8) + +#define QUADSPI_BFGENCR 0x20 +#define QUADSPI_BFGENCR_SEQID(x) ((x) << 12) + +#define QUADSPI_BUF0IND 0x30 +#define QUADSPI_BUF1IND 0x34 +#define QUADSPI_BUF2IND 0x38 +#define QUADSPI_SFAR 0x100 + +#define QUADSPI_SMPR 0x108 +#define QUADSPI_SMPR_DDRSMP_MASK GENMASK(18, 16) +#define QUADSPI_SMPR_FSDLY_MASK BIT(6) +#define QUADSPI_SMPR_FSPHS_MASK BIT(5) +#define QUADSPI_SMPR_HSENA_MASK BIT(0) + +#define QUADSPI_RBCT 0x110 +#define QUADSPI_RBCT_WMRK_MASK GENMASK(4, 0) +#define QUADSPI_RBCT_RXBRD_USEIPS BIT(8) + +#define QUADSPI_TBDR 0x154 + +#define QUADSPI_SR 0x15c +#define QUADSPI_SR_IP_ACC_MASK BIT(1) +#define QUADSPI_SR_AHB_ACC_MASK BIT(2) + +#define QUADSPI_FR 0x160 +#define QUADSPI_FR_TFF_MASK BIT(0) + +#define QUADSPI_SPTRCLR 0x16c +#define QUADSPI_SPTRCLR_IPPTRC BIT(8) +#define QUADSPI_SPTRCLR_BFPTRC BIT(0) + +#define QUADSPI_SFA1AD 0x180 +#define QUADSPI_SFA2AD 0x184 +#define QUADSPI_SFB1AD 0x188 +#define QUADSPI_SFB2AD 0x18c +#define QUADSPI_RBDR(x) (0x200 + ((x) * 4)) + +#define QUADSPI_LUTKEY 0x300 +#define QUADSPI_LUTKEY_VALUE 0x5AF05AF0 + +#define QUADSPI_LCKCR 0x304 +#define QUADSPI_LCKER_LOCK BIT(0) +#define QUADSPI_LCKER_UNLOCK BIT(1) + +#define QUADSPI_RSER 0x164 +#define QUADSPI_RSER_TFIE BIT(0) + +#define QUADSPI_LUT_BASE 0x310 +#define QUADSPI_LUT_OFFSET (SEQID_LUT * 4 * 4) +#define QUADSPI_LUT_REG(idx) \ + (QUADSPI_LUT_BASE + QUADSPI_LUT_OFFSET + (idx) * 4) + +/* Instruction set for the LUT register */ +#define LUT_STOP 0 +#define LUT_CMD 1 +#define LUT_ADDR 2 +#define LUT_DUMMY 3 +#define LUT_MODE 4 +#define LUT_MODE2 5 +#define LUT_MODE4 6 +#define LUT_FSL_READ 7 +#define LUT_FSL_WRITE 8 +#define LUT_JMP_ON_CS 9 +#define LUT_ADDR_DDR 10 +#define LUT_MODE_DDR 11 +#define LUT_MODE2_DDR 12 +#define LUT_MODE4_DDR 13 +#define LUT_FSL_READ_DDR 14 +#define LUT_FSL_WRITE_DDR 15 +#define LUT_DATA_LEARN 16 + +/* + * The PAD definitions for LUT register. + * + * The pad stands for the number of IO lines [0:3]. + * For example, the quad read needs four IO lines, + * so you should use LUT_PAD(4). + */ +#define LUT_PAD(x) (fls(x) - 1) + +/* + * Macro for constructing the LUT entries with the following + * register layout: + * + * --------------------------------------------------- + * | INSTR1 | PAD1 | OPRND1 | INSTR0 | PAD0 | OPRND0 | + * --------------------------------------------------- + */ +#define LUT_DEF(idx, ins, pad, opr) \ + ((((ins) << 10) | ((pad) << 8) | (opr)) << (((idx) % 2) * 16)) + +/* Controller needs driver to swap endianness */ +#define QUADSPI_QUIRK_SWAP_ENDIAN BIT(0) + +/* Controller needs 4x internal clock */ +#define QUADSPI_QUIRK_4X_INT_CLK BIT(1) + +/* + * TKT253890, the controller needs the driver to fill the txfifo with + * 16 bytes at least to trigger a data transfer, even though the extra + * data won't be transferred. + */ +#define QUADSPI_QUIRK_TKT253890 BIT(2) + +/* TKT245618, the controller cannot wake up from wait mode */ +#define QUADSPI_QUIRK_TKT245618 BIT(3) + +/* + * Controller adds QSPI_AMBA_BASE (base address of the mapped memory) + * internally. No need to add it when setting SFXXAD and SFAR registers + */ +#define QUADSPI_QUIRK_BASE_INTERNAL BIT(4) + +struct fsl_qspi_devtype_data { + unsigned int rxfifo; + unsigned int txfifo; + unsigned int ahb_buf_size; + unsigned int quirks; + bool little_endian; +}; + +static const struct fsl_qspi_devtype_data vybrid_data = { + .rxfifo = SZ_128, + .txfifo = SZ_64, + .ahb_buf_size = SZ_1K, + .quirks = QUADSPI_QUIRK_SWAP_ENDIAN, + .little_endian = true, +}; + +static const struct fsl_qspi_devtype_data imx6sx_data = { + .rxfifo = SZ_128, + .txfifo = SZ_512, + .ahb_buf_size = SZ_1K, + .quirks = QUADSPI_QUIRK_4X_INT_CLK | QUADSPI_QUIRK_TKT245618, + .little_endian = true, +}; + +static const struct fsl_qspi_devtype_data imx7d_data = { + .rxfifo = SZ_512, + .txfifo = SZ_512, + .ahb_buf_size = SZ_1K, + .quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_4X_INT_CLK, + .little_endian = true, +}; + +static const struct fsl_qspi_devtype_data imx6ul_data = { + .rxfifo = SZ_128, + .txfifo = SZ_512, + .ahb_buf_size = SZ_1K, + .quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_4X_INT_CLK, + .little_endian = true, +}; + +static const struct fsl_qspi_devtype_data ls1021a_data = { + .rxfifo = SZ_128, + .txfifo = SZ_64, + .ahb_buf_size = SZ_1K, + .quirks = 0, + .little_endian = false, +}; + +static const struct fsl_qspi_devtype_data ls2080a_data = { + .rxfifo = SZ_128, + .txfifo = SZ_64, + .ahb_buf_size = SZ_1K, + .quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_BASE_INTERNAL, + .little_endian = true, +}; + +struct fsl_qspi { + void __iomem *iobase; + void __iomem *ahb_addr; + u32 memmap_phy; + struct clk *clk, *clk_en; + struct device *dev; + struct completion c; + const struct fsl_qspi_devtype_data *devtype_data; + struct mutex lock; + struct pm_qos_request pm_qos_req; + int selected; +}; + +static inline int needs_swap_endian(struct fsl_qspi *q) +{ + return q->devtype_data->quirks & QUADSPI_QUIRK_SWAP_ENDIAN; +} + +static inline int needs_4x_clock(struct fsl_qspi *q) +{ + return q->devtype_data->quirks & QUADSPI_QUIRK_4X_INT_CLK; +} + +static inline int needs_fill_txfifo(struct fsl_qspi *q) +{ + return q->devtype_data->quirks & QUADSPI_QUIRK_TKT253890; +} + +static inline int needs_wakeup_wait_mode(struct fsl_qspi *q) +{ + return q->devtype_data->quirks & QUADSPI_QUIRK_TKT245618; +} + +static inline int needs_amba_base_offset(struct fsl_qspi *q) +{ + return !(q->devtype_data->quirks & QUADSPI_QUIRK_BASE_INTERNAL); +} + +/* + * An IC bug makes it necessary to rearrange the 32-bit data. + * Later chips, such as IMX6SLX, have fixed this bug. + */ +static inline u32 fsl_qspi_endian_xchg(struct fsl_qspi *q, u32 a) +{ + return needs_swap_endian(q) ? __swab32(a) : a; +} + +/* + * R/W functions for big- or little-endian registers: + * The QSPI controller's endianness is independent of + * the CPU core's endianness. So far, although the CPU + * core is little-endian the QSPI controller can use + * big-endian or little-endian. + */ +static void qspi_writel(struct fsl_qspi *q, u32 val, void __iomem *addr) +{ + if (q->devtype_data->little_endian) + iowrite32(val, addr); + else + iowrite32be(val, addr); +} + +static u32 qspi_readl(struct fsl_qspi *q, void __iomem *addr) +{ + if (q->devtype_data->little_endian) + return ioread32(addr); + + return ioread32be(addr); +} + +static irqreturn_t fsl_qspi_irq_handler(int irq, void *dev_id) +{ + struct fsl_qspi *q = dev_id; + u32 reg; + + /* clear interrupt */ + reg = qspi_readl(q, q->iobase + QUADSPI_FR); + qspi_writel(q, reg, q->iobase + QUADSPI_FR); + + if (reg & QUADSPI_FR_TFF_MASK) + complete(&q->c); + + dev_dbg(q->dev, "QUADSPI_FR : 0x%.8x:0x%.8x\n", 0, reg); + return IRQ_HANDLED; +} + +static int fsl_qspi_check_buswidth(struct fsl_qspi *q, u8 width) +{ + switch (width) { + case 1: + case 2: + case 4: + return 0; + } + + return -ENOTSUPP; +} + +static bool fsl_qspi_supports_op(struct spi_mem *mem, + const struct spi_mem_op *op) +{ + struct fsl_qspi *q = spi_controller_get_devdata(mem->spi->master); + int ret; + + ret = fsl_qspi_check_buswidth(q, op->cmd.buswidth); + + if (op->addr.nbytes) + ret |= fsl_qspi_check_buswidth(q, op->addr.buswidth); + + if (op->dummy.nbytes) + ret |= fsl_qspi_check_buswidth(q, op->dummy.buswidth); + + if (op->data.nbytes) + ret |= fsl_qspi_check_buswidth(q, op->data.buswidth); + + if (ret) + return false; + + /* + * The number of instructions needed for the op, needs + * to fit into a single LUT entry. + */ + if (op->addr.nbytes + + (op->dummy.nbytes ? 1:0) + + (op->data.nbytes ? 1:0) > 6) + return false; + + /* Max 64 dummy clock cycles supported */ + if (op->dummy.nbytes && + (op->dummy.nbytes * 8 / op->dummy.buswidth > 64)) + return false; + + /* Max data length, check controller limits and alignment */ + if (op->data.dir == SPI_MEM_DATA_IN && + (op->data.nbytes > q->devtype_data->ahb_buf_size || + (op->data.nbytes > q->devtype_data->rxfifo - 4 && + !IS_ALIGNED(op->data.nbytes, 8)))) + return false; + + if (op->data.dir == SPI_MEM_DATA_OUT && + op->data.nbytes > q->devtype_data->txfifo) + return false; + + return true; +} + +static void fsl_qspi_prepare_lut(struct fsl_qspi *q, + const struct spi_mem_op *op) +{ + void __iomem *base = q->iobase; + u32 lutval[4] = {}; + int lutidx = 1, i; + + lutval[0] |= LUT_DEF(0, LUT_CMD, LUT_PAD(op->cmd.buswidth), + op->cmd.opcode); + + /* + * For some unknown reason, using LUT_ADDR doesn't work in some + * cases (at least with only one byte long addresses), so + * let's use LUT_MODE to write the address bytes one by one + */ + for (i = 0; i < op->addr.nbytes; i++) { + u8 addrbyte = op->addr.val >> (8 * (op->addr.nbytes - i - 1)); + + lutval[lutidx / 2] |= LUT_DEF(lutidx, LUT_MODE, + LUT_PAD(op->addr.buswidth), + addrbyte); + lutidx++; + } + + if (op->dummy.nbytes) { + lutval[lutidx / 2] |= LUT_DEF(lutidx, LUT_DUMMY, + LUT_PAD(op->dummy.buswidth), + op->dummy.nbytes * 8 / + op->dummy.buswidth); + lutidx++; + } + + if (op->data.nbytes) { + lutval[lutidx / 2] |= LUT_DEF(lutidx, + op->data.dir == SPI_MEM_DATA_IN ? + LUT_FSL_READ : LUT_FSL_WRITE, + LUT_PAD(op->data.buswidth), + 0); + lutidx++; + } + + lutval[lutidx / 2] |= LUT_DEF(lutidx, LUT_STOP, 0, 0); + + /* unlock LUT */ + qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY); + qspi_writel(q, QUADSPI_LCKER_UNLOCK, q->iobase + QUADSPI_LCKCR); + + /* fill LUT */ + for (i = 0; i < ARRAY_SIZE(lutval); i++) + qspi_writel(q, lutval[i], base + QUADSPI_LUT_REG(i)); + + /* lock LUT */ + qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY); + qspi_writel(q, QUADSPI_LCKER_LOCK, q->iobase + QUADSPI_LCKCR); +} + +static int fsl_qspi_clk_prep_enable(struct fsl_qspi *q) +{ + int ret; + + ret = clk_prepare_enable(q->clk_en); + if (ret) + return ret; + + ret = clk_prepare_enable(q->clk); + if (ret) { + clk_disable_unprepare(q->clk_en); + return ret; + } + + if (needs_wakeup_wait_mode(q)) + pm_qos_add_request(&q->pm_qos_req, PM_QOS_CPU_DMA_LATENCY, 0); + + return 0; +} + +static void fsl_qspi_clk_disable_unprep(struct fsl_qspi *q) +{ + if (needs_wakeup_wait_mode(q)) + pm_qos_remove_request(&q->pm_qos_req); + + clk_disable_unprepare(q->clk); + clk_disable_unprepare(q->clk_en); +} + +/* + * If we have changed the content of the flash by writing or erasing, or if we + * read from flash with a different offset into the page buffer, we need to + * invalidate the AHB buffer. If we do not do so, we may read out the wrong + * data. The spec tells us reset the AHB domain and Serial Flash domain at + * the same time. + */ +static void fsl_qspi_invalidate(struct fsl_qspi *q) +{ + u32 reg; + + reg = qspi_readl(q, q->iobase + QUADSPI_MCR); + reg |= QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK; + qspi_writel(q, reg, q->iobase + QUADSPI_MCR); + + /* + * The minimum delay : 1 AHB + 2 SFCK clocks. + * Delay 1 us is enough. + */ + udelay(1); + + reg &= ~(QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK); + qspi_writel(q, reg, q->iobase + QUADSPI_MCR); +} + +static void fsl_qspi_select_mem(struct fsl_qspi *q, struct spi_device *spi) +{ + unsigned long rate = spi->max_speed_hz; + int ret, i; + u32 map_addr; + + if (q->selected == spi->chip_select) + return; + + if (needs_4x_clock(q)) + rate *= 4; + + fsl_qspi_clk_disable_unprep(q); + + ret = clk_set_rate(q->clk, rate); + if (ret) + return; + + ret = fsl_qspi_clk_prep_enable(q); + if (ret) + return; + + q->selected = spi->chip_select; + + fsl_qspi_invalidate(q); +} + +static void fsl_qspi_read_ahb(struct fsl_qspi *q, const struct spi_mem_op *op) +{ + memcpy_fromio(op->data.buf.in, + q->ahb_addr + q->selected * q->devtype_data->ahb_buf_size, + op->data.nbytes); +} + +static void fsl_qspi_fill_txfifo(struct fsl_qspi *q, + const struct spi_mem_op *op) +{ + void __iomem *base = q->iobase; + int i; + u32 val; + + for (i = 0; i < ALIGN_DOWN(op->data.nbytes, 4); i += 4) { + memcpy(&val, op->data.buf.out + i, 4); + val = fsl_qspi_endian_xchg(q, val); + qspi_writel(q, val, base + QUADSPI_TBDR); + } + + if (i < op->data.nbytes) { + memcpy(&val, op->data.buf.out + i, op->data.nbytes - i); + val = fsl_qspi_endian_xchg(q, val); + qspi_writel(q, val, base + QUADSPI_TBDR); + } + + if (needs_fill_txfifo(q)) { + for (i = op->data.nbytes; i < 16; i += 4) + qspi_writel(q, 0, base + QUADSPI_TBDR); + } +} + +static void fsl_qspi_read_rxfifo(struct fsl_qspi *q, + const struct spi_mem_op *op) +{ + void __iomem *base = q->iobase; + int i; + u8 *buf = op->data.buf.in; + u32 val; + + for (i = 0; i < ALIGN_DOWN(op->data.nbytes, 4); i += 4) { + val = qspi_readl(q, base + QUADSPI_RBDR(i / 4)); + val = fsl_qspi_endian_xchg(q, val); + memcpy(buf + i, &val, 4); + } + + if (i < op->data.nbytes) { + val = qspi_readl(q, base + QUADSPI_RBDR(i / 4)); + val = fsl_qspi_endian_xchg(q, val); + memcpy(buf + i, &val, op->data.nbytes - i); + } +} + +static int fsl_qspi_do_op(struct fsl_qspi *q, const struct spi_mem_op *op) +{ + void __iomem *base = q->iobase; + int err = 0; + + init_completion(&q->c); + + /* + * Always start the sequence at the same index since we update + * the LUT at each exec_op() call. And also specify the DATA + * length, since it's has not been specified in the LUT. + */ + qspi_writel(q, op->data.nbytes | QUADSPI_IPCR_SEQID(SEQID_LUT), + base + QUADSPI_IPCR); + + /* Wait for the interrupt. */ + if (!wait_for_completion_timeout(&q->c, msecs_to_jiffies(1000))) + err = -ETIMEDOUT; + + if (!err && op->data.nbytes && op->data.dir == SPI_MEM_DATA_IN) + fsl_qspi_read_rxfifo(q, op); + + return err; +} + +static int fsl_qspi_readl_poll_tout(struct fsl_qspi *q, void __iomem *base, + u32 mask, u32 delay_us, u32 timeout_us) +{ + u32 reg; + + if (!q->devtype_data->little_endian) + mask = (u32)cpu_to_be32(mask); + + return readl_poll_timeout(base, reg, !(reg & mask), delay_us, + timeout_us); +} + +static int fsl_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + struct fsl_qspi *q = spi_controller_get_devdata(mem->spi->master); + void __iomem *base = q->iobase; + u32 addr_offset = 0; + int err = 0; + + mutex_lock(&q->lock); + + /* wait for the controller being ready */ + fsl_qspi_readl_poll_tout(q, base + QUADSPI_SR, (QUADSPI_SR_IP_ACC_MASK | + QUADSPI_SR_AHB_ACC_MASK), 10, 1000); + + fsl_qspi_select_mem(q, mem->spi); + + if (needs_amba_base_offset(q)) + addr_offset = q->memmap_phy; + + qspi_writel(q, + q->selected * q->devtype_data->ahb_buf_size + addr_offset, + base + QUADSPI_SFAR); + + qspi_writel(q, qspi_readl(q, base + QUADSPI_MCR) | + QUADSPI_MCR_CLR_RXF_MASK | QUADSPI_MCR_CLR_TXF_MASK, + base + QUADSPI_MCR); + + qspi_writel(q, QUADSPI_SPTRCLR_BFPTRC | QUADSPI_SPTRCLR_IPPTRC, + base + QUADSPI_SPTRCLR); + + fsl_qspi_prepare_lut(q, op); + + /* + * If we have large chunks of data, we read them through the AHB bus + * by accessing the mapped memory. In all other cases we use + * IP commands to access the flash. + */ + if (op->data.nbytes > (q->devtype_data->rxfifo - 4) && + op->data.dir == SPI_MEM_DATA_IN) { + fsl_qspi_read_ahb(q, op); + } else { + qspi_writel(q, QUADSPI_RBCT_WMRK_MASK | + QUADSPI_RBCT_RXBRD_USEIPS, base + QUADSPI_RBCT); + + if (op->data.nbytes && op->data.dir == SPI_MEM_DATA_OUT) + fsl_qspi_fill_txfifo(q, op); + + err = fsl_qspi_do_op(q, op); + } + + /* Invalidate the data in the AHB buffer. */ + fsl_qspi_invalidate(q); + + mutex_unlock(&q->lock); + + return err; +} + +static int fsl_qspi_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) +{ + struct fsl_qspi *q = spi_controller_get_devdata(mem->spi->master); + + if (op->data.dir == SPI_MEM_DATA_OUT) { + if (op->data.nbytes > q->devtype_data->txfifo) + op->data.nbytes = q->devtype_data->txfifo; + } else { + if (op->data.nbytes > q->devtype_data->ahb_buf_size) + op->data.nbytes = q->devtype_data->ahb_buf_size; + else if (op->data.nbytes > (q->devtype_data->rxfifo - 4)) + op->data.nbytes = ALIGN_DOWN(op->data.nbytes, 8); + } + + return 0; +} + +static int fsl_qspi_default_setup(struct fsl_qspi *q) +{ + void __iomem *base = q->iobase; + u32 reg, addr_offset = 0; + int ret; + + /* disable and unprepare clock to avoid glitch pass to controller */ + fsl_qspi_clk_disable_unprep(q); + + /* the default frequency, we will change it later if necessary. */ + ret = clk_set_rate(q->clk, 66000000); + if (ret) + return ret; + + ret = fsl_qspi_clk_prep_enable(q); + if (ret) + return ret; + + /* Reset the module */ + qspi_writel(q, QUADSPI_MCR_SWRSTSD_MASK | QUADSPI_MCR_SWRSTHD_MASK, + base + QUADSPI_MCR); + udelay(1); + + /* Disable the module */ + qspi_writel(q, QUADSPI_MCR_MDIS_MASK | QUADSPI_MCR_RESERVED_MASK, + base + QUADSPI_MCR); + + reg = qspi_readl(q, base + QUADSPI_SMPR); + qspi_writel(q, reg & ~(QUADSPI_SMPR_FSDLY_MASK + | QUADSPI_SMPR_FSPHS_MASK + | QUADSPI_SMPR_HSENA_MASK + | QUADSPI_SMPR_DDRSMP_MASK), base + QUADSPI_SMPR); + + /* We only use the buffer3 for AHB read */ + qspi_writel(q, 0, base + QUADSPI_BUF0IND); + qspi_writel(q, 0, base + QUADSPI_BUF1IND); + qspi_writel(q, 0, base + QUADSPI_BUF2IND); + + qspi_writel(q, QUADSPI_BFGENCR_SEQID(SEQID_LUT), + q->iobase + QUADSPI_BFGENCR); + qspi_writel(q, QUADSPI_RBCT_WMRK_MASK, base + QUADSPI_RBCT); + qspi_writel(q, QUADSPI_BUF3CR_ALLMST_MASK | + QUADSPI_BUF3CR_ADATSZ(q->devtype_data->ahb_buf_size / 8), + base + QUADSPI_BUF3CR); + + if (needs_amba_base_offset(q)) + addr_offset = q->memmap_phy; + + /* + * In HW there can be a maximum of four chips on two buses with + * two chip selects on each bus. We use four chip selects in SW + * to differentiate between the four chips. + * We use ahb_buf_size for each chip and set SFA1AD, SFA2AD, SFB1AD, + * SFB2AD accordingly. + */ + qspi_writel(q, q->devtype_data->ahb_buf_size + addr_offset, + base + QUADSPI_SFA1AD); + qspi_writel(q, q->devtype_data->ahb_buf_size * 2 + addr_offset, + base + QUADSPI_SFA2AD); + qspi_writel(q, q->devtype_data->ahb_buf_size * 3 + addr_offset, + base + QUADSPI_SFB1AD); + qspi_writel(q, q->devtype_data->ahb_buf_size * 4 + addr_offset, + base + QUADSPI_SFB2AD); + + q->selected = -1; + + /* Enable the module */ + qspi_writel(q, QUADSPI_MCR_RESERVED_MASK | QUADSPI_MCR_END_CFG_MASK, + base + QUADSPI_MCR); + + /* clear all interrupt status */ + qspi_writel(q, 0xffffffff, q->iobase + QUADSPI_FR); + + /* enable the interrupt */ + qspi_writel(q, QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER); + + return 0; +} + +static const char *fsl_qspi_get_name(struct spi_mem *mem) +{ + struct fsl_qspi *q = spi_controller_get_devdata(mem->spi->master); + struct device *dev = &mem->spi->dev; + const char *name; + + /* + * In order to keep mtdparts compatible with the old MTD driver at + * mtd/spi-nor/fsl-quadspi.c, we set a custom name derived from the + * platform_device of the controller. + */ + if (of_get_available_child_count(q->dev->of_node) == 1) + return dev_name(q->dev); + + name = devm_kasprintf(dev, GFP_KERNEL, + "%s-%d", dev_name(q->dev), + mem->spi->chip_select); + + if (!name) { + dev_err(dev, "failed to get memory for custom flash name\n"); + return ERR_PTR(-ENOMEM); + } + + return name; +} + +static const struct spi_controller_mem_ops fsl_qspi_mem_ops = { + .adjust_op_size = fsl_qspi_adjust_op_size, + .supports_op = fsl_qspi_supports_op, + .exec_op = fsl_qspi_exec_op, + .get_name = fsl_qspi_get_name, +}; + +static int fsl_qspi_probe(struct platform_device *pdev) +{ + struct spi_controller *ctlr; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct resource *res; + struct fsl_qspi *q; + int ret; + + ctlr = spi_alloc_master(&pdev->dev, sizeof(*q)); + if (!ctlr) + return -ENOMEM; + + ctlr->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | + SPI_TX_DUAL | SPI_TX_QUAD; + + q = spi_controller_get_devdata(ctlr); + q->dev = dev; + q->devtype_data = of_device_get_match_data(dev); + if (!q->devtype_data) { + ret = -ENODEV; + goto err_put_ctrl; + } + + platform_set_drvdata(pdev, q); + + /* find the resources */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "QuadSPI"); + q->iobase = devm_ioremap_resource(dev, res); + if (IS_ERR(q->iobase)) { + ret = PTR_ERR(q->iobase); + goto err_put_ctrl; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "QuadSPI-memory"); + q->ahb_addr = devm_ioremap_resource(dev, res); + if (IS_ERR(q->ahb_addr)) { + ret = PTR_ERR(q->ahb_addr); + goto err_put_ctrl; + } + + q->memmap_phy = res->start; + + /* find the clocks */ + q->clk_en = devm_clk_get(dev, "qspi_en"); + if (IS_ERR(q->clk_en)) { + ret = PTR_ERR(q->clk_en); + goto err_put_ctrl; + } + + q->clk = devm_clk_get(dev, "qspi"); + if (IS_ERR(q->clk)) { + ret = PTR_ERR(q->clk); + goto err_put_ctrl; + } + + ret = fsl_qspi_clk_prep_enable(q); + if (ret) { + dev_err(dev, "can not enable the clock\n"); + goto err_put_ctrl; + } + + /* find the irq */ + ret = platform_get_irq(pdev, 0); + if (ret < 0) { + dev_err(dev, "failed to get the irq: %d\n", ret); + goto err_disable_clk; + } + + ret = devm_request_irq(dev, ret, + fsl_qspi_irq_handler, 0, pdev->name, q); + if (ret) { + dev_err(dev, "failed to request irq: %d\n", ret); + goto err_disable_clk; + } + + mutex_init(&q->lock); + + ctlr->bus_num = -1; + ctlr->num_chipselect = 4; + ctlr->mem_ops = &fsl_qspi_mem_ops; + + fsl_qspi_default_setup(q); + + ctlr->dev.of_node = np; + + ret = spi_register_controller(ctlr); + if (ret) + goto err_destroy_mutex; + + return 0; + +err_destroy_mutex: + mutex_destroy(&q->lock); + +err_disable_clk: + fsl_qspi_clk_disable_unprep(q); + +err_put_ctrl: + spi_controller_put(ctlr); + + dev_err(dev, "Freescale QuadSPI probe failed\n"); + return ret; +} + +static int fsl_qspi_remove(struct platform_device *pdev) +{ + struct fsl_qspi *q = platform_get_drvdata(pdev); + + /* disable the hardware */ + qspi_writel(q, QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR); + qspi_writel(q, 0x0, q->iobase + QUADSPI_RSER); + + fsl_qspi_clk_disable_unprep(q); + + mutex_destroy(&q->lock); + + return 0; +} + +static int fsl_qspi_suspend(struct device *dev) +{ + return 0; +} + +static int fsl_qspi_resume(struct device *dev) +{ + struct fsl_qspi *q = dev_get_drvdata(dev); + + fsl_qspi_default_setup(q); + + return 0; +} + +static const struct of_device_id fsl_qspi_dt_ids[] = { + { .compatible = "fsl,vf610-qspi", .data = &vybrid_data, }, + { .compatible = "fsl,imx6sx-qspi", .data = &imx6sx_data, }, + { .compatible = "fsl,imx7d-qspi", .data = &imx7d_data, }, + { .compatible = "fsl,imx6ul-qspi", .data = &imx6ul_data, }, + { .compatible = "fsl,ls1021a-qspi", .data = &ls1021a_data, }, + { .compatible = "fsl,ls2080a-qspi", .data = &ls2080a_data, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids); + +static const struct dev_pm_ops fsl_qspi_pm_ops = { + .suspend = fsl_qspi_suspend, + .resume = fsl_qspi_resume, +}; + +static struct platform_driver fsl_qspi_driver = { + .driver = { + .name = "fsl-quadspi", + .of_match_table = fsl_qspi_dt_ids, + .pm = &fsl_qspi_pm_ops, + }, + .probe = fsl_qspi_probe, + .remove = fsl_qspi_remove, +}; +module_platform_driver(fsl_qspi_driver); + +MODULE_DESCRIPTION("Freescale QuadSPI Controller Driver"); +MODULE_AUTHOR("Freescale Semiconductor Inc."); +MODULE_AUTHOR("Boris Brezillion "); +MODULE_AUTHOR("Frieder Schrempf "); +MODULE_AUTHOR("Yogesh Gaur "); +MODULE_AUTHOR("Suresh Gupta "); +MODULE_LICENSE("GPL v2"); From patchwork Tue Nov 27 10:24:26 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Frieder Schrempf X-Patchwork-Id: 1003758 X-Patchwork-Delegate: boris.brezillon@free-electrons.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=lists.infradead.org (client-ip=2607:7c80:54:e::133; helo=bombadil.infradead.org; envelope-from=linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=kontron.de Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="UQQXnXdL"; dkim-atps=neutral Received: from bombadil.infradead.org (bombadil.infradead.org [IPv6:2607:7c80:54:e::133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 4340Kd4zKtz9s3l for ; Tue, 27 Nov 2018 21:25:25 +1100 (AEDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:In-Reply-To:References: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=g+0+ST85x/z6mVfGsJz0vy6UsSS+PwZ/pG1o1Fv+2so=; b=UQQXnXdLol3pFU Lru6w0of29IFqRq9/gKX4lWSvaj7vr2hiXIObNj3+J3qpVst6BlVCyATuTrpfPL+C3GnElO3QqfBv ASSBYNi0RJBr9/zQFuXyrrfRA16hMdtpwzmA6sfVdFTicszU2LMDv9BjmHHltZUw2CfKBpNXrz/E/ /sSX201ejFk5QB5DL3JuxJIAJAjAezSO/08vV3oPMaVPgiV/GrBiuwzqVhDunR1tVpmkkIDM1BSLC pYYdpe5rURnGETNAMUJtuKGa+c9fsOijCAPMP1Qt1occS4Xoa42Hh2zDJiL7fZ3XPhMzr8+DByw/+ T5wENix+I8w/nw6XRuHw==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRaYQ-0000Zj-Pw; Tue, 27 Nov 2018 10:25:18 +0000 Received: from skedge03.snt-world.com ([91.208.41.68]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRaXi-0007UV-9U for linux-mtd@lists.infradead.org; Tue, 27 Nov 2018 10:24:42 +0000 Received: from sntmail11s.snt-is.com (unknown [10.203.32.181]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by skedge03.snt-world.com (Postfix) with ESMTPS id 0B89067A7C5; Tue, 27 Nov 2018 11:24:27 +0100 (CET) Received: from sntmail12r.snt-is.com (10.203.32.182) by sntmail11s.snt-is.com (10.203.32.181) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1466.3; Tue, 27 Nov 2018 11:24:26 +0100 Received: from sntmail12r.snt-is.com ([fe80::e551:8750:7bba:3305]) by sntmail12r.snt-is.com ([fe80::e551:8750:7bba:3305%5]) with mapi id 15.01.1466.003; Tue, 27 Nov 2018 11:24:26 +0100 From: Schrempf Frieder To: "linux-mtd@lists.infradead.org" , "boris.brezillon@bootlin.com" , "linux-spi@vger.kernel.org" , David Woodhouse , Brian Norris , "Marek Vasut" , Richard Weinberger , "Mark Brown" Subject: [PATCH v6 4/9] dt-bindings: spi: Move the bindings for the FSL QSPI driver Thread-Topic: [PATCH v6 4/9] dt-bindings: spi: Move the bindings for the FSL QSPI driver Thread-Index: AQHUhjtfwm5o37+udUuh8e4P0U+zDg== Date: Tue, 27 Nov 2018 10:24:26 +0000 Message-ID: <1543314174-28580-5-git-send-email-frieder.schrempf@kontron.de> References: <1543314174-28580-1-git-send-email-frieder.schrempf@kontron.de> In-Reply-To: <1543314174-28580-1-git-send-email-frieder.schrempf@kontron.de> Accept-Language: de-DE, en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [172.25.9.43] x-c2processedorg: 51b406b7-48a2-4d03-b652-521f56ac89f3 MIME-Version: 1.0 X-SnT-MailScanner-Information: Please contact the ISP for more information X-SnT-MailScanner-ID: 0B89067A7C5.A26D1 X-SnT-MailScanner: Found to be clean X-SnT-MailScanner-SpamCheck: X-SnT-MailScanner-From: frieder.schrempf@kontron.de X-SnT-MailScanner-To: boris.brezillon@bootlin.com, broonie@kernel.org, computersforpeace@gmail.com, david.wolfe@nxp.com, devicetree@vger.kernel.org, dwmw2@infradead.org, fabio.estevam@nxp.com, han.xu@nxp.com, linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org, linux-spi@vger.kernel.org, marek.vasut@gmail.com, mark.rutland@arm.com, miquel.raynal@bootlin.com, prabhakar.kushwaha@nxp.com, richard@nod.at, robh+dt@kernel.org, shawnguo@kernel.org, yogeshnarayan.gaur@nxp.com X-Spam-Status: No X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20181127_022434_611329_E84F6BF6 X-CRM114-Status: UNSURE ( 8.97 ) X-CRM114-Notice: Please train this message. X-Spam-Score: -0.0 (/) X-Spam-Report: SpamAssassin version 3.4.2 on bombadil.infradead.org summary: Content analysis details: (-0.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no trust [91.208.41.68 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record X-BeenThere: linux-mtd@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Mark Rutland , "devicetree@vger.kernel.org" , "yogeshnarayan.gaur@nxp.com" , "miquel.raynal@bootlin.com" , "linux-kernel@vger.kernel.org" , Schrempf Frieder , Rob Herring , "prabhakar.kushwaha@nxp.com" , "han.xu@nxp.com" , "fabio.estevam@nxp.com" , "david.wolfe@nxp.com" , "shawnguo@kernel.org" Sender: "linux-mtd" Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org Move the documentation of the old SPI NOR driver to the place of the new SPI memory interface based driver. Signed-off-by: Frieder Schrempf Reviewed-by: Rob Herring --- .../bindings/{mtd/fsl-quadspi.txt => spi/spi-fsl-qspi.txt} | 0 1 file changed, 0 insertions(+), 0 deletions(-) diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt similarity index 100% rename from Documentation/devicetree/bindings/mtd/fsl-quadspi.txt rename to Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt From patchwork Tue Nov 27 10:24:27 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Frieder Schrempf X-Patchwork-Id: 1003761 X-Patchwork-Delegate: boris.brezillon@free-electrons.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=lists.infradead.org (client-ip=2607:7c80:54:e::133; helo=bombadil.infradead.org; envelope-from=linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=kontron.de Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="N+1fgwNm"; dkim-atps=neutral Received: from bombadil.infradead.org (bombadil.infradead.org [IPv6:2607:7c80:54:e::133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 4340Kt4m5yz9s29 for ; Tue, 27 Nov 2018 21:25:38 +1100 (AEDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:In-Reply-To:References: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=aGx09BmFJi344bRonI6pA/wo8IMefemF8Ygllkf7T7g=; b=N+1fgwNmJmHhNi 7Q8823koxv4NIYEUk96AjHVXWw9xjvgGq0xdSXxs2Ld8V3fODJCi0QL+WbAXmRlpKNueKYYcW2GJ1 jLcEpZ8bUlaF26Bj+80hMTLaSTPG9uOaV1/qVAP9nBbHPBAJYpMQtwYjqZhyGcdZ4fHyAFB4YNegx OPO1Zy/XvwJhXrD6Gy9+gLmPhKL17ADZgjcE0V6rul/JPD/NLmbQ9dwVDP4lexpQklUbA2UUcxzrH xYmb/xF4xoJOsEfz7gkOlkuhGoBK46epxnagC7XA5+qXNhc2H9UAJ8N/NuKk+H8iob82ch3opxMw5 BR2vxIrh+n1M5OrmjbCA==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRaYf-0001HA-PZ; Tue, 27 Nov 2018 10:25:33 +0000 Received: from skedge03.snt-world.com ([91.208.41.68]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRaXi-0007Xj-9e for linux-mtd@lists.infradead.org; Tue, 27 Nov 2018 10:24:42 +0000 Received: from sntmail10s.snt-is.com (unknown [10.203.32.183]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by skedge03.snt-world.com (Postfix) with ESMTPS id 47C5667A700; Tue, 27 Nov 2018 11:24:28 +0100 (CET) Received: from sntmail12r.snt-is.com (10.203.32.182) by sntmail10s.snt-is.com (10.203.32.183) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1466.3; Tue, 27 Nov 2018 11:24:27 +0100 Received: from sntmail12r.snt-is.com ([fe80::e551:8750:7bba:3305]) by sntmail12r.snt-is.com ([fe80::e551:8750:7bba:3305%5]) with mapi id 15.01.1466.003; Tue, 27 Nov 2018 11:24:27 +0100 From: Schrempf Frieder To: "linux-mtd@lists.infradead.org" , "boris.brezillon@bootlin.com" , "linux-spi@vger.kernel.org" , Mark Brown Subject: [PATCH v6 5/9] dt-bindings: spi: Adjust the bindings for the FSL QSPI driver Thread-Topic: [PATCH v6 5/9] dt-bindings: spi: Adjust the bindings for the FSL QSPI driver Thread-Index: AQHUhjtg2P6+d8V7fk+O6Kxg7G99yg== Date: Tue, 27 Nov 2018 10:24:27 +0000 Message-ID: <1543314174-28580-6-git-send-email-frieder.schrempf@kontron.de> References: <1543314174-28580-1-git-send-email-frieder.schrempf@kontron.de> In-Reply-To: <1543314174-28580-1-git-send-email-frieder.schrempf@kontron.de> Accept-Language: de-DE, en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [172.25.9.43] x-c2processedorg: 51b406b7-48a2-4d03-b652-521f56ac89f3 MIME-Version: 1.0 X-SnT-MailScanner-Information: Please contact the ISP for more information X-SnT-MailScanner-ID: 47C5667A700.AE022 X-SnT-MailScanner: Found to be clean X-SnT-MailScanner-SpamCheck: X-SnT-MailScanner-From: frieder.schrempf@kontron.de X-SnT-MailScanner-To: boris.brezillon@bootlin.com, broonie@kernel.org, computersforpeace@gmail.com, david.wolfe@nxp.com, devicetree@vger.kernel.org, dwmw2@infradead.org, fabio.estevam@nxp.com, han.xu@nxp.com, linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org, linux-spi@vger.kernel.org, marek.vasut@gmail.com, mark.rutland@arm.com, miquel.raynal@bootlin.com, prabhakar.kushwaha@nxp.com, richard@nod.at, robh+dt@kernel.org, shawnguo@kernel.org, yogeshnarayan.gaur@nxp.com X-Spam-Status: No X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20181127_022434_820021_A7EE7433 X-CRM114-Status: GOOD ( 14.78 ) X-Spam-Score: -0.0 (/) X-Spam-Report: SpamAssassin version 3.4.2 on bombadil.infradead.org summary: Content analysis details: (-0.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no trust [91.208.41.68 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record X-BeenThere: linux-mtd@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Mark Rutland , "devicetree@vger.kernel.org" , "yogeshnarayan.gaur@nxp.com" , Rob Herring , "richard@nod.at" , "linux-kernel@vger.kernel.org" , "shawnguo@kernel.org" , "marek.vasut@gmail.com" , "han.xu@nxp.com" , "prabhakar.kushwaha@nxp.com" , Schrempf Frieder , "miquel.raynal@bootlin.com" , "fabio.estevam@nxp.com" , "david.wolfe@nxp.com" , "computersforpeace@gmail.com" , "dwmw2@infradead.org" Sender: "linux-mtd" Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org Adjust the documentation of the new SPI memory interface based driver to reflect the new drivers settings. The "old" driver was using the "fsl,qspi-has-second-chip" property to select one of two dual chip setups (two chips on one bus or two chips on separate buses). And it used the order in which the subnodes are defined in the dt to select the CS, the chip is connected to. Both methods are wrong and in fact the "reg" property should be used to determine which bus and CS a chip is connected to. This also enables us to use different setups than just single chip, or symmetric dual chip. So the porting of the driver from the MTD to the SPI framework actually enforces the use of the "reg" properties and makes "fsl,qspi-has-second-chip" superfluous. As all boards that have "fsl,qspi-has-second-chip" set, also have correct "reg" properties, the removal of this property shouldn't lead to any incompatibilities. The only compatibility issues I can see are with imx6sx-sdb.dts and imx6sx-sdb-reva.dts, which have their reg properties set incorrectly (see explanation here: [2]), all other boards should stay compatible. Also the "big-endian" flag was removed, as this setting is now selected by the driver, depending on which SoC is in use. [2] https://patchwork.ozlabs.org/patch/922817/#1925445 Signed-off-by: Frieder Schrempf Reviewed-by: Rob Herring --- .../devicetree/bindings/spi/spi-fsl-qspi.txt | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt index 483e9cf..e8f1d62 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-qspi.txt @@ -14,15 +14,13 @@ Required properties: - clocks : The clocks needed by the QuadSPI controller - clock-names : Should contain the name of the clocks: "qspi_en" and "qspi". -Optional properties: - - fsl,qspi-has-second-chip: The controller has two buses, bus A and bus B. - Each bus can be connected with two NOR flashes. - Most of the time, each bus only has one NOR flash - connected, this is the default case. - But if there are two NOR flashes connected to the - bus, you should enable this property. - (Please check the board's schematic.) - - big-endian : That means the IP register is big endian +Required SPI slave node properties: + - reg: There are two buses (A and B) with two chip selects each. + This encodes to which bus and CS the flash is connected: + <0>: Bus A, CS 0 + <1>: Bus A, CS 1 + <2>: Bus B, CS 0 + <3>: Bus B, CS 1 Example: @@ -40,7 +38,7 @@ qspi0: quadspi@40044000 { }; }; -Example showing the usage of two SPI NOR devices: +Example showing the usage of two SPI NOR devices on bus A: &qspi2 { pinctrl-names = "default"; From patchwork Tue Nov 27 10:24:35 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Frieder Schrempf X-Patchwork-Id: 1003765 X-Patchwork-Delegate: boris.brezillon@free-electrons.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=lists.infradead.org (client-ip=2607:7c80:54:e::133; helo=bombadil.infradead.org; envelope-from=linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=kontron.de Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="MhLN8WMe"; dkim-atps=neutral Received: from bombadil.infradead.org (bombadil.infradead.org [IPv6:2607:7c80:54:e::133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 4340MR3Mlmz9s29 for ; Tue, 27 Nov 2018 21:26:59 +1100 (AEDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:In-Reply-To:References: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=D5g4sOejXKb+vsbJHBLXu99lwKnC89JUtBOa6CzewY8=; b=MhLN8WMe2fQx2I UjlkkwN4JvIeq5OZj0D2LjqioCbdIFSUHsnhnvTW+rwfSQZgpMLTXEqJcEM+Rt8BP2MY4SA1adqK2 HZH/RQTqG7o7+I1pLGZSQZZADNDEjgHGAtXTQMBoaIdg7BF81wdz0fA90c76OoEw4y9/gXIVTQUFt VH3Cj5y1mfkJxpdiECl6Wz0Z8rFW1gEQBYRrxPJr/hte4tnuXBPgqfvI4NL7kB2w323Ip3YipZLK1 1AMe+hQFIX6Qs3hsviqVkISkcA754f7GH++m8Xsv9Sc6jLwpXitXroDskhq8FTzBm/1eDgMQar1C3 G67OyQ9x0zjgzg7XNxSw==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRaZx-0002ZW-5b; Tue, 27 Nov 2018 10:26:53 +0000 Received: from skedge04.snt-world.com ([91.208.41.69]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRaXv-0007Zl-Jo for linux-mtd@lists.infradead.org; Tue, 27 Nov 2018 10:25:36 +0000 Received: from sntmail11s.snt-is.com (unknown [10.203.32.181]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by skedge04.snt-world.com (Postfix) with ESMTPS id BD7FC67A879; Tue, 27 Nov 2018 11:24:35 +0100 (CET) Received: from sntmail12r.snt-is.com (10.203.32.182) by sntmail11s.snt-is.com (10.203.32.181) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1466.3; Tue, 27 Nov 2018 11:24:35 +0100 Received: from sntmail12r.snt-is.com ([fe80::e551:8750:7bba:3305]) by sntmail12r.snt-is.com ([fe80::e551:8750:7bba:3305%5]) with mapi id 15.01.1466.003; Tue, 27 Nov 2018 11:24:35 +0100 From: Schrempf Frieder To: "linux-mtd@lists.infradead.org" , "boris.brezillon@bootlin.com" , "linux-spi@vger.kernel.org" , Marek Vasut Subject: [PATCH v6 6/9] mtd: fsl-quadspi: Remove the driver as it was replaced by spi-fsl-qspi.c Thread-Topic: [PATCH v6 6/9] mtd: fsl-quadspi: Remove the driver as it was replaced by spi-fsl-qspi.c Thread-Index: AQHUhjtkebyXCoZrG0Cm1ba2xMukNQ== Date: Tue, 27 Nov 2018 10:24:35 +0000 Message-ID: <1543314174-28580-7-git-send-email-frieder.schrempf@kontron.de> References: <1543314174-28580-1-git-send-email-frieder.schrempf@kontron.de> In-Reply-To: <1543314174-28580-1-git-send-email-frieder.schrempf@kontron.de> Accept-Language: de-DE, en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [172.25.9.43] x-c2processedorg: 51b406b7-48a2-4d03-b652-521f56ac89f3 MIME-Version: 1.0 X-SnT-MailScanner-Information: Please contact the ISP for more information X-SnT-MailScanner-ID: BD7FC67A879.A34C7 X-SnT-MailScanner: Found to be clean X-SnT-MailScanner-SpamCheck: X-SnT-MailScanner-From: frieder.schrempf@kontron.de X-SnT-MailScanner-To: boris.brezillon@bootlin.com, broonie@kernel.org, computersforpeace@gmail.com, david.wolfe@nxp.com, dwmw2@infradead.org, fabio.estevam@nxp.com, han.xu@nxp.com, linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org, linux-spi@vger.kernel.org, marek.vasut@gmail.com, miquel.raynal@bootlin.com, prabhakar.kushwaha@nxp.com, richard@nod.at, shawnguo@kernel.org, yogeshnarayan.gaur@nxp.com X-Spam-Status: No X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20181127_022448_622712_6FD95CC6 X-CRM114-Status: GOOD ( 15.29 ) X-Spam-Score: -0.0 (/) X-Spam-Report: SpamAssassin version 3.4.2 on bombadil.infradead.org summary: Content analysis details: (-0.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no trust [91.208.41.69 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record X-BeenThere: linux-mtd@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: "yogeshnarayan.gaur@nxp.com" , "richard@nod.at" , "prabhakar.kushwaha@nxp.com" , "linux-kernel@vger.kernel.org" , "shawnguo@kernel.org" , "han.xu@nxp.com" , "broonie@kernel.org" , Schrempf Frieder , "miquel.raynal@bootlin.com" , "fabio.estevam@nxp.com" , "david.wolfe@nxp.com" , "computersforpeace@gmail.com" , "dwmw2@infradead.org" Sender: "linux-mtd" Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org There's a new driver using the SPI memory interface of the SPI framework at spi/spi-fsl-qspi.c, which can be used together with m25p80.c to replace the functionality of this SPI NOR driver. The new driver is already in use and this code is not compiled anymore, so let's remove it. Signed-off-by: Frieder Schrempf --- drivers/mtd/spi-nor/fsl-quadspi.c | 1224 -------------------------------- 1 file changed, 1224 deletions(-) diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c deleted file mode 100644 index 1ff3430..0000000 --- a/drivers/mtd/spi-nor/fsl-quadspi.c +++ /dev/null @@ -1,1224 +0,0 @@ -/* - * Freescale QuadSPI driver. - * - * Copyright (C) 2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* Controller needs driver to swap endian */ -#define QUADSPI_QUIRK_SWAP_ENDIAN (1 << 0) -/* Controller needs 4x internal clock */ -#define QUADSPI_QUIRK_4X_INT_CLK (1 << 1) -/* - * TKT253890, Controller needs driver to fill txfifo till 16 byte to - * trigger data transfer even though extern data will not transferred. - */ -#define QUADSPI_QUIRK_TKT253890 (1 << 2) -/* Controller cannot wake up from wait mode, TKT245618 */ -#define QUADSPI_QUIRK_TKT245618 (1 << 3) - -/* The registers */ -#define QUADSPI_MCR 0x00 -#define QUADSPI_MCR_RESERVED_SHIFT 16 -#define QUADSPI_MCR_RESERVED_MASK (0xF << QUADSPI_MCR_RESERVED_SHIFT) -#define QUADSPI_MCR_MDIS_SHIFT 14 -#define QUADSPI_MCR_MDIS_MASK (1 << QUADSPI_MCR_MDIS_SHIFT) -#define QUADSPI_MCR_CLR_TXF_SHIFT 11 -#define QUADSPI_MCR_CLR_TXF_MASK (1 << QUADSPI_MCR_CLR_TXF_SHIFT) -#define QUADSPI_MCR_CLR_RXF_SHIFT 10 -#define QUADSPI_MCR_CLR_RXF_MASK (1 << QUADSPI_MCR_CLR_RXF_SHIFT) -#define QUADSPI_MCR_DDR_EN_SHIFT 7 -#define QUADSPI_MCR_DDR_EN_MASK (1 << QUADSPI_MCR_DDR_EN_SHIFT) -#define QUADSPI_MCR_END_CFG_SHIFT 2 -#define QUADSPI_MCR_END_CFG_MASK (3 << QUADSPI_MCR_END_CFG_SHIFT) -#define QUADSPI_MCR_SWRSTHD_SHIFT 1 -#define QUADSPI_MCR_SWRSTHD_MASK (1 << QUADSPI_MCR_SWRSTHD_SHIFT) -#define QUADSPI_MCR_SWRSTSD_SHIFT 0 -#define QUADSPI_MCR_SWRSTSD_MASK (1 << QUADSPI_MCR_SWRSTSD_SHIFT) - -#define QUADSPI_IPCR 0x08 -#define QUADSPI_IPCR_SEQID_SHIFT 24 -#define QUADSPI_IPCR_SEQID_MASK (0xF << QUADSPI_IPCR_SEQID_SHIFT) - -#define QUADSPI_BUF0CR 0x10 -#define QUADSPI_BUF1CR 0x14 -#define QUADSPI_BUF2CR 0x18 -#define QUADSPI_BUFXCR_INVALID_MSTRID 0xe - -#define QUADSPI_BUF3CR 0x1c -#define QUADSPI_BUF3CR_ALLMST_SHIFT 31 -#define QUADSPI_BUF3CR_ALLMST_MASK (1 << QUADSPI_BUF3CR_ALLMST_SHIFT) -#define QUADSPI_BUF3CR_ADATSZ_SHIFT 8 -#define QUADSPI_BUF3CR_ADATSZ_MASK (0xFF << QUADSPI_BUF3CR_ADATSZ_SHIFT) - -#define QUADSPI_BFGENCR 0x20 -#define QUADSPI_BFGENCR_PAR_EN_SHIFT 16 -#define QUADSPI_BFGENCR_PAR_EN_MASK (1 << (QUADSPI_BFGENCR_PAR_EN_SHIFT)) -#define QUADSPI_BFGENCR_SEQID_SHIFT 12 -#define QUADSPI_BFGENCR_SEQID_MASK (0xF << QUADSPI_BFGENCR_SEQID_SHIFT) - -#define QUADSPI_BUF0IND 0x30 -#define QUADSPI_BUF1IND 0x34 -#define QUADSPI_BUF2IND 0x38 -#define QUADSPI_SFAR 0x100 - -#define QUADSPI_SMPR 0x108 -#define QUADSPI_SMPR_DDRSMP_SHIFT 16 -#define QUADSPI_SMPR_DDRSMP_MASK (7 << QUADSPI_SMPR_DDRSMP_SHIFT) -#define QUADSPI_SMPR_FSDLY_SHIFT 6 -#define QUADSPI_SMPR_FSDLY_MASK (1 << QUADSPI_SMPR_FSDLY_SHIFT) -#define QUADSPI_SMPR_FSPHS_SHIFT 5 -#define QUADSPI_SMPR_FSPHS_MASK (1 << QUADSPI_SMPR_FSPHS_SHIFT) -#define QUADSPI_SMPR_HSENA_SHIFT 0 -#define QUADSPI_SMPR_HSENA_MASK (1 << QUADSPI_SMPR_HSENA_SHIFT) - -#define QUADSPI_RBSR 0x10c -#define QUADSPI_RBSR_RDBFL_SHIFT 8 -#define QUADSPI_RBSR_RDBFL_MASK (0x3F << QUADSPI_RBSR_RDBFL_SHIFT) - -#define QUADSPI_RBCT 0x110 -#define QUADSPI_RBCT_WMRK_MASK 0x1F -#define QUADSPI_RBCT_RXBRD_SHIFT 8 -#define QUADSPI_RBCT_RXBRD_USEIPS (0x1 << QUADSPI_RBCT_RXBRD_SHIFT) - -#define QUADSPI_TBSR 0x150 -#define QUADSPI_TBDR 0x154 -#define QUADSPI_SR 0x15c -#define QUADSPI_SR_IP_ACC_SHIFT 1 -#define QUADSPI_SR_IP_ACC_MASK (0x1 << QUADSPI_SR_IP_ACC_SHIFT) -#define QUADSPI_SR_AHB_ACC_SHIFT 2 -#define QUADSPI_SR_AHB_ACC_MASK (0x1 << QUADSPI_SR_AHB_ACC_SHIFT) - -#define QUADSPI_FR 0x160 -#define QUADSPI_FR_TFF_MASK 0x1 - -#define QUADSPI_SFA1AD 0x180 -#define QUADSPI_SFA2AD 0x184 -#define QUADSPI_SFB1AD 0x188 -#define QUADSPI_SFB2AD 0x18c -#define QUADSPI_RBDR 0x200 - -#define QUADSPI_LUTKEY 0x300 -#define QUADSPI_LUTKEY_VALUE 0x5AF05AF0 - -#define QUADSPI_LCKCR 0x304 -#define QUADSPI_LCKER_LOCK 0x1 -#define QUADSPI_LCKER_UNLOCK 0x2 - -#define QUADSPI_RSER 0x164 -#define QUADSPI_RSER_TFIE (0x1 << 0) - -#define QUADSPI_LUT_BASE 0x310 - -/* - * The definition of the LUT register shows below: - * - * --------------------------------------------------- - * | INSTR1 | PAD1 | OPRND1 | INSTR0 | PAD0 | OPRND0 | - * --------------------------------------------------- - */ -#define OPRND0_SHIFT 0 -#define PAD0_SHIFT 8 -#define INSTR0_SHIFT 10 -#define OPRND1_SHIFT 16 - -/* Instruction set for the LUT register. */ -#define LUT_STOP 0 -#define LUT_CMD 1 -#define LUT_ADDR 2 -#define LUT_DUMMY 3 -#define LUT_MODE 4 -#define LUT_MODE2 5 -#define LUT_MODE4 6 -#define LUT_FSL_READ 7 -#define LUT_FSL_WRITE 8 -#define LUT_JMP_ON_CS 9 -#define LUT_ADDR_DDR 10 -#define LUT_MODE_DDR 11 -#define LUT_MODE2_DDR 12 -#define LUT_MODE4_DDR 13 -#define LUT_FSL_READ_DDR 14 -#define LUT_FSL_WRITE_DDR 15 -#define LUT_DATA_LEARN 16 - -/* - * The PAD definitions for LUT register. - * - * The pad stands for the lines number of IO[0:3]. - * For example, the Quad read need four IO lines, so you should - * set LUT_PAD4 which means we use four IO lines. - */ -#define LUT_PAD1 0 -#define LUT_PAD2 1 -#define LUT_PAD4 2 - -/* Oprands for the LUT register. */ -#define ADDR24BIT 0x18 -#define ADDR32BIT 0x20 - -/* Macros for constructing the LUT register. */ -#define LUT0(ins, pad, opr) \ - (((opr) << OPRND0_SHIFT) | ((LUT_##pad) << PAD0_SHIFT) | \ - ((LUT_##ins) << INSTR0_SHIFT)) - -#define LUT1(ins, pad, opr) (LUT0(ins, pad, opr) << OPRND1_SHIFT) - -/* other macros for LUT register. */ -#define QUADSPI_LUT(x) (QUADSPI_LUT_BASE + (x) * 4) -#define QUADSPI_LUT_NUM 64 - -/* SEQID -- we can have 16 seqids at most. */ -#define SEQID_READ 0 -#define SEQID_WREN 1 -#define SEQID_WRDI 2 -#define SEQID_RDSR 3 -#define SEQID_SE 4 -#define SEQID_CHIP_ERASE 5 -#define SEQID_PP 6 -#define SEQID_RDID 7 -#define SEQID_WRSR 8 -#define SEQID_RDCR 9 -#define SEQID_EN4B 10 -#define SEQID_BRWR 11 - -#define QUADSPI_MIN_IOMAP SZ_4M - -enum fsl_qspi_devtype { - FSL_QUADSPI_VYBRID, - FSL_QUADSPI_IMX6SX, - FSL_QUADSPI_IMX7D, - FSL_QUADSPI_IMX6UL, - FSL_QUADSPI_LS1021A, - FSL_QUADSPI_LS2080A, -}; - -struct fsl_qspi_devtype_data { - enum fsl_qspi_devtype devtype; - int rxfifo; - int txfifo; - int ahb_buf_size; - int driver_data; -}; - -static const struct fsl_qspi_devtype_data vybrid_data = { - .devtype = FSL_QUADSPI_VYBRID, - .rxfifo = 128, - .txfifo = 64, - .ahb_buf_size = 1024, - .driver_data = QUADSPI_QUIRK_SWAP_ENDIAN, -}; - -static const struct fsl_qspi_devtype_data imx6sx_data = { - .devtype = FSL_QUADSPI_IMX6SX, - .rxfifo = 128, - .txfifo = 512, - .ahb_buf_size = 1024, - .driver_data = QUADSPI_QUIRK_4X_INT_CLK - | QUADSPI_QUIRK_TKT245618, -}; - -static const struct fsl_qspi_devtype_data imx7d_data = { - .devtype = FSL_QUADSPI_IMX7D, - .rxfifo = 512, - .txfifo = 512, - .ahb_buf_size = 1024, - .driver_data = QUADSPI_QUIRK_TKT253890 - | QUADSPI_QUIRK_4X_INT_CLK, -}; - -static const struct fsl_qspi_devtype_data imx6ul_data = { - .devtype = FSL_QUADSPI_IMX6UL, - .rxfifo = 128, - .txfifo = 512, - .ahb_buf_size = 1024, - .driver_data = QUADSPI_QUIRK_TKT253890 - | QUADSPI_QUIRK_4X_INT_CLK, -}; - -static struct fsl_qspi_devtype_data ls1021a_data = { - .devtype = FSL_QUADSPI_LS1021A, - .rxfifo = 128, - .txfifo = 64, - .ahb_buf_size = 1024, - .driver_data = 0, -}; - -static const struct fsl_qspi_devtype_data ls2080a_data = { - .devtype = FSL_QUADSPI_LS2080A, - .rxfifo = 128, - .txfifo = 64, - .ahb_buf_size = 1024, - .driver_data = QUADSPI_QUIRK_TKT253890, -}; - - -#define FSL_QSPI_MAX_CHIP 4 -struct fsl_qspi { - struct spi_nor nor[FSL_QSPI_MAX_CHIP]; - void __iomem *iobase; - void __iomem *ahb_addr; - u32 memmap_phy; - u32 memmap_offs; - u32 memmap_len; - struct clk *clk, *clk_en; - struct device *dev; - struct completion c; - const struct fsl_qspi_devtype_data *devtype_data; - u32 nor_size; - u32 nor_num; - u32 clk_rate; - unsigned int chip_base_addr; /* We may support two chips. */ - bool has_second_chip; - bool big_endian; - struct mutex lock; - struct pm_qos_request pm_qos_req; -}; - -static inline int needs_swap_endian(struct fsl_qspi *q) -{ - return q->devtype_data->driver_data & QUADSPI_QUIRK_SWAP_ENDIAN; -} - -static inline int needs_4x_clock(struct fsl_qspi *q) -{ - return q->devtype_data->driver_data & QUADSPI_QUIRK_4X_INT_CLK; -} - -static inline int needs_fill_txfifo(struct fsl_qspi *q) -{ - return q->devtype_data->driver_data & QUADSPI_QUIRK_TKT253890; -} - -static inline int needs_wakeup_wait_mode(struct fsl_qspi *q) -{ - return q->devtype_data->driver_data & QUADSPI_QUIRK_TKT245618; -} - -/* - * R/W functions for big- or little-endian registers: - * The qSPI controller's endian is independent of the CPU core's endian. - * So far, although the CPU core is little-endian but the qSPI have two - * versions for big-endian and little-endian. - */ -static void qspi_writel(struct fsl_qspi *q, u32 val, void __iomem *addr) -{ - if (q->big_endian) - iowrite32be(val, addr); - else - iowrite32(val, addr); -} - -static u32 qspi_readl(struct fsl_qspi *q, void __iomem *addr) -{ - if (q->big_endian) - return ioread32be(addr); - else - return ioread32(addr); -} - -/* - * An IC bug makes us to re-arrange the 32-bit data. - * The following chips, such as IMX6SLX, have fixed this bug. - */ -static inline u32 fsl_qspi_endian_xchg(struct fsl_qspi *q, u32 a) -{ - return needs_swap_endian(q) ? __swab32(a) : a; -} - -static inline void fsl_qspi_unlock_lut(struct fsl_qspi *q) -{ - qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY); - qspi_writel(q, QUADSPI_LCKER_UNLOCK, q->iobase + QUADSPI_LCKCR); -} - -static inline void fsl_qspi_lock_lut(struct fsl_qspi *q) -{ - qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY); - qspi_writel(q, QUADSPI_LCKER_LOCK, q->iobase + QUADSPI_LCKCR); -} - -static irqreturn_t fsl_qspi_irq_handler(int irq, void *dev_id) -{ - struct fsl_qspi *q = dev_id; - u32 reg; - - /* clear interrupt */ - reg = qspi_readl(q, q->iobase + QUADSPI_FR); - qspi_writel(q, reg, q->iobase + QUADSPI_FR); - - if (reg & QUADSPI_FR_TFF_MASK) - complete(&q->c); - - dev_dbg(q->dev, "QUADSPI_FR : 0x%.8x:0x%.8x\n", q->chip_base_addr, reg); - return IRQ_HANDLED; -} - -static void fsl_qspi_init_lut(struct fsl_qspi *q) -{ - void __iomem *base = q->iobase; - int rxfifo = q->devtype_data->rxfifo; - u32 lut_base; - int i; - - struct spi_nor *nor = &q->nor[0]; - u8 addrlen = (nor->addr_width == 3) ? ADDR24BIT : ADDR32BIT; - u8 read_op = nor->read_opcode; - u8 read_dm = nor->read_dummy; - - fsl_qspi_unlock_lut(q); - - /* Clear all the LUT table */ - for (i = 0; i < QUADSPI_LUT_NUM; i++) - qspi_writel(q, 0, base + QUADSPI_LUT_BASE + i * 4); - - /* Read */ - lut_base = SEQID_READ * 4; - - qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen), - base + QUADSPI_LUT(lut_base)); - qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) | - LUT1(FSL_READ, PAD4, rxfifo), - base + QUADSPI_LUT(lut_base + 1)); - - /* Write enable */ - lut_base = SEQID_WREN * 4; - qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WREN), - base + QUADSPI_LUT(lut_base)); - - /* Page Program */ - lut_base = SEQID_PP * 4; - - qspi_writel(q, LUT0(CMD, PAD1, nor->program_opcode) | - LUT1(ADDR, PAD1, addrlen), - base + QUADSPI_LUT(lut_base)); - qspi_writel(q, LUT0(FSL_WRITE, PAD1, 0), - base + QUADSPI_LUT(lut_base + 1)); - - /* Read Status */ - lut_base = SEQID_RDSR * 4; - qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDSR) | - LUT1(FSL_READ, PAD1, 0x1), - base + QUADSPI_LUT(lut_base)); - - /* Erase a sector */ - lut_base = SEQID_SE * 4; - - qspi_writel(q, LUT0(CMD, PAD1, nor->erase_opcode) | - LUT1(ADDR, PAD1, addrlen), - base + QUADSPI_LUT(lut_base)); - - /* Erase the whole chip */ - lut_base = SEQID_CHIP_ERASE * 4; - qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_CHIP_ERASE), - base + QUADSPI_LUT(lut_base)); - - /* READ ID */ - lut_base = SEQID_RDID * 4; - qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDID) | - LUT1(FSL_READ, PAD1, 0x8), - base + QUADSPI_LUT(lut_base)); - - /* Write Register */ - lut_base = SEQID_WRSR * 4; - qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WRSR) | - LUT1(FSL_WRITE, PAD1, 0x2), - base + QUADSPI_LUT(lut_base)); - - /* Read Configuration Register */ - lut_base = SEQID_RDCR * 4; - qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDCR) | - LUT1(FSL_READ, PAD1, 0x1), - base + QUADSPI_LUT(lut_base)); - - /* Write disable */ - lut_base = SEQID_WRDI * 4; - qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WRDI), - base + QUADSPI_LUT(lut_base)); - - /* Enter 4 Byte Mode (Micron) */ - lut_base = SEQID_EN4B * 4; - qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_EN4B), - base + QUADSPI_LUT(lut_base)); - - /* Enter 4 Byte Mode (Spansion) */ - lut_base = SEQID_BRWR * 4; - qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_BRWR), - base + QUADSPI_LUT(lut_base)); - - fsl_qspi_lock_lut(q); -} - -/* Get the SEQID for the command */ -static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd) -{ - switch (cmd) { - case SPINOR_OP_READ_1_1_4: - case SPINOR_OP_READ_1_1_4_4B: - return SEQID_READ; - case SPINOR_OP_WREN: - return SEQID_WREN; - case SPINOR_OP_WRDI: - return SEQID_WRDI; - case SPINOR_OP_RDSR: - return SEQID_RDSR; - case SPINOR_OP_SE: - return SEQID_SE; - case SPINOR_OP_CHIP_ERASE: - return SEQID_CHIP_ERASE; - case SPINOR_OP_PP: - return SEQID_PP; - case SPINOR_OP_RDID: - return SEQID_RDID; - case SPINOR_OP_WRSR: - return SEQID_WRSR; - case SPINOR_OP_RDCR: - return SEQID_RDCR; - case SPINOR_OP_EN4B: - return SEQID_EN4B; - case SPINOR_OP_BRWR: - return SEQID_BRWR; - default: - if (cmd == q->nor[0].erase_opcode) - return SEQID_SE; - dev_err(q->dev, "Unsupported cmd 0x%.2x\n", cmd); - break; - } - return -EINVAL; -} - -static int -fsl_qspi_runcmd(struct fsl_qspi *q, u8 cmd, unsigned int addr, int len) -{ - void __iomem *base = q->iobase; - int seqid; - u32 reg, reg2; - int err; - - init_completion(&q->c); - dev_dbg(q->dev, "to 0x%.8x:0x%.8x, len:%d, cmd:%.2x\n", - q->chip_base_addr, addr, len, cmd); - - /* save the reg */ - reg = qspi_readl(q, base + QUADSPI_MCR); - - qspi_writel(q, q->memmap_phy + q->chip_base_addr + addr, - base + QUADSPI_SFAR); - qspi_writel(q, QUADSPI_RBCT_WMRK_MASK | QUADSPI_RBCT_RXBRD_USEIPS, - base + QUADSPI_RBCT); - qspi_writel(q, reg | QUADSPI_MCR_CLR_RXF_MASK, base + QUADSPI_MCR); - - do { - reg2 = qspi_readl(q, base + QUADSPI_SR); - if (reg2 & (QUADSPI_SR_IP_ACC_MASK | QUADSPI_SR_AHB_ACC_MASK)) { - udelay(1); - dev_dbg(q->dev, "The controller is busy, 0x%x\n", reg2); - continue; - } - break; - } while (1); - - /* trigger the LUT now */ - seqid = fsl_qspi_get_seqid(q, cmd); - if (seqid < 0) - return seqid; - - qspi_writel(q, (seqid << QUADSPI_IPCR_SEQID_SHIFT) | len, - base + QUADSPI_IPCR); - - /* Wait for the interrupt. */ - if (!wait_for_completion_timeout(&q->c, msecs_to_jiffies(1000))) { - dev_err(q->dev, - "cmd 0x%.2x timeout, addr@%.8x, FR:0x%.8x, SR:0x%.8x\n", - cmd, addr, qspi_readl(q, base + QUADSPI_FR), - qspi_readl(q, base + QUADSPI_SR)); - err = -ETIMEDOUT; - } else { - err = 0; - } - - /* restore the MCR */ - qspi_writel(q, reg, base + QUADSPI_MCR); - - return err; -} - -/* Read out the data from the QUADSPI_RBDR buffer registers. */ -static void fsl_qspi_read_data(struct fsl_qspi *q, int len, u8 *rxbuf) -{ - u32 tmp; - int i = 0; - - while (len > 0) { - tmp = qspi_readl(q, q->iobase + QUADSPI_RBDR + i * 4); - tmp = fsl_qspi_endian_xchg(q, tmp); - dev_dbg(q->dev, "chip addr:0x%.8x, rcv:0x%.8x\n", - q->chip_base_addr, tmp); - - if (len >= 4) { - *((u32 *)rxbuf) = tmp; - rxbuf += 4; - } else { - memcpy(rxbuf, &tmp, len); - break; - } - - len -= 4; - i++; - } -} - -/* - * If we have changed the content of the flash by writing or erasing, - * we need to invalidate the AHB buffer. If we do not do so, we may read out - * the wrong data. The spec tells us reset the AHB domain and Serial Flash - * domain at the same time. - */ -static inline void fsl_qspi_invalid(struct fsl_qspi *q) -{ - u32 reg; - - reg = qspi_readl(q, q->iobase + QUADSPI_MCR); - reg |= QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK; - qspi_writel(q, reg, q->iobase + QUADSPI_MCR); - - /* - * The minimum delay : 1 AHB + 2 SFCK clocks. - * Delay 1 us is enough. - */ - udelay(1); - - reg &= ~(QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK); - qspi_writel(q, reg, q->iobase + QUADSPI_MCR); -} - -static ssize_t fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor, - u8 opcode, unsigned int to, u32 *txbuf, - unsigned count) -{ - int ret, i, j; - u32 tmp; - - dev_dbg(q->dev, "to 0x%.8x:0x%.8x, len : %d\n", - q->chip_base_addr, to, count); - - /* clear the TX FIFO. */ - tmp = qspi_readl(q, q->iobase + QUADSPI_MCR); - qspi_writel(q, tmp | QUADSPI_MCR_CLR_TXF_MASK, q->iobase + QUADSPI_MCR); - - /* fill the TX data to the FIFO */ - for (j = 0, i = ((count + 3) / 4); j < i; j++) { - tmp = fsl_qspi_endian_xchg(q, *txbuf); - qspi_writel(q, tmp, q->iobase + QUADSPI_TBDR); - txbuf++; - } - - /* fill the TXFIFO upto 16 bytes for i.MX7d */ - if (needs_fill_txfifo(q)) - for (; i < 4; i++) - qspi_writel(q, tmp, q->iobase + QUADSPI_TBDR); - - /* Trigger it */ - ret = fsl_qspi_runcmd(q, opcode, to, count); - - if (ret == 0) - return count; - - return ret; -} - -static void fsl_qspi_set_map_addr(struct fsl_qspi *q) -{ - int nor_size = q->nor_size; - void __iomem *base = q->iobase; - - qspi_writel(q, nor_size + q->memmap_phy, base + QUADSPI_SFA1AD); - qspi_writel(q, nor_size * 2 + q->memmap_phy, base + QUADSPI_SFA2AD); - qspi_writel(q, nor_size * 3 + q->memmap_phy, base + QUADSPI_SFB1AD); - qspi_writel(q, nor_size * 4 + q->memmap_phy, base + QUADSPI_SFB2AD); -} - -/* - * There are two different ways to read out the data from the flash: - * the "IP Command Read" and the "AHB Command Read". - * - * The IC guy suggests we use the "AHB Command Read" which is faster - * then the "IP Command Read". (What's more is that there is a bug in - * the "IP Command Read" in the Vybrid.) - * - * After we set up the registers for the "AHB Command Read", we can use - * the memcpy to read the data directly. A "missed" access to the buffer - * causes the controller to clear the buffer, and use the sequence pointed - * by the QUADSPI_BFGENCR[SEQID] to initiate a read from the flash. - */ -static int fsl_qspi_init_ahb_read(struct fsl_qspi *q) -{ - void __iomem *base = q->iobase; - int seqid; - - /* AHB configuration for access buffer 0/1/2 .*/ - qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR); - qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR); - qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR); - /* - * Set ADATSZ with the maximum AHB buffer size to improve the - * read performance. - */ - qspi_writel(q, QUADSPI_BUF3CR_ALLMST_MASK | - ((q->devtype_data->ahb_buf_size / 8) - << QUADSPI_BUF3CR_ADATSZ_SHIFT), - base + QUADSPI_BUF3CR); - - /* We only use the buffer3 */ - qspi_writel(q, 0, base + QUADSPI_BUF0IND); - qspi_writel(q, 0, base + QUADSPI_BUF1IND); - qspi_writel(q, 0, base + QUADSPI_BUF2IND); - - /* Set the default lut sequence for AHB Read. */ - seqid = fsl_qspi_get_seqid(q, q->nor[0].read_opcode); - if (seqid < 0) - return seqid; - - qspi_writel(q, seqid << QUADSPI_BFGENCR_SEQID_SHIFT, - q->iobase + QUADSPI_BFGENCR); - - return 0; -} - -/* This function was used to prepare and enable QSPI clock */ -static int fsl_qspi_clk_prep_enable(struct fsl_qspi *q) -{ - int ret; - - ret = clk_prepare_enable(q->clk_en); - if (ret) - return ret; - - ret = clk_prepare_enable(q->clk); - if (ret) { - clk_disable_unprepare(q->clk_en); - return ret; - } - - if (needs_wakeup_wait_mode(q)) - pm_qos_add_request(&q->pm_qos_req, PM_QOS_CPU_DMA_LATENCY, 0); - - return 0; -} - -/* This function was used to disable and unprepare QSPI clock */ -static void fsl_qspi_clk_disable_unprep(struct fsl_qspi *q) -{ - if (needs_wakeup_wait_mode(q)) - pm_qos_remove_request(&q->pm_qos_req); - - clk_disable_unprepare(q->clk); - clk_disable_unprepare(q->clk_en); - -} - -/* We use this function to do some basic init for spi_nor_scan(). */ -static int fsl_qspi_nor_setup(struct fsl_qspi *q) -{ - void __iomem *base = q->iobase; - u32 reg; - int ret; - - /* disable and unprepare clock to avoid glitch pass to controller */ - fsl_qspi_clk_disable_unprep(q); - - /* the default frequency, we will change it in the future. */ - ret = clk_set_rate(q->clk, 66000000); - if (ret) - return ret; - - ret = fsl_qspi_clk_prep_enable(q); - if (ret) - return ret; - - /* Reset the module */ - qspi_writel(q, QUADSPI_MCR_SWRSTSD_MASK | QUADSPI_MCR_SWRSTHD_MASK, - base + QUADSPI_MCR); - udelay(1); - - /* Init the LUT table. */ - fsl_qspi_init_lut(q); - - /* Disable the module */ - qspi_writel(q, QUADSPI_MCR_MDIS_MASK | QUADSPI_MCR_RESERVED_MASK, - base + QUADSPI_MCR); - - reg = qspi_readl(q, base + QUADSPI_SMPR); - qspi_writel(q, reg & ~(QUADSPI_SMPR_FSDLY_MASK - | QUADSPI_SMPR_FSPHS_MASK - | QUADSPI_SMPR_HSENA_MASK - | QUADSPI_SMPR_DDRSMP_MASK), base + QUADSPI_SMPR); - - /* Enable the module */ - qspi_writel(q, QUADSPI_MCR_RESERVED_MASK | QUADSPI_MCR_END_CFG_MASK, - base + QUADSPI_MCR); - - /* clear all interrupt status */ - qspi_writel(q, 0xffffffff, q->iobase + QUADSPI_FR); - - /* enable the interrupt */ - qspi_writel(q, QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER); - - return 0; -} - -static int fsl_qspi_nor_setup_last(struct fsl_qspi *q) -{ - unsigned long rate = q->clk_rate; - int ret; - - if (needs_4x_clock(q)) - rate *= 4; - - /* disable and unprepare clock to avoid glitch pass to controller */ - fsl_qspi_clk_disable_unprep(q); - - ret = clk_set_rate(q->clk, rate); - if (ret) - return ret; - - ret = fsl_qspi_clk_prep_enable(q); - if (ret) - return ret; - - /* Init the LUT table again. */ - fsl_qspi_init_lut(q); - - /* Init for AHB read */ - return fsl_qspi_init_ahb_read(q); -} - -static const struct of_device_id fsl_qspi_dt_ids[] = { - { .compatible = "fsl,vf610-qspi", .data = &vybrid_data, }, - { .compatible = "fsl,imx6sx-qspi", .data = &imx6sx_data, }, - { .compatible = "fsl,imx7d-qspi", .data = &imx7d_data, }, - { .compatible = "fsl,imx6ul-qspi", .data = &imx6ul_data, }, - { .compatible = "fsl,ls1021a-qspi", .data = (void *)&ls1021a_data, }, - { .compatible = "fsl,ls2080a-qspi", .data = &ls2080a_data, }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids); - -static void fsl_qspi_set_base_addr(struct fsl_qspi *q, struct spi_nor *nor) -{ - q->chip_base_addr = q->nor_size * (nor - q->nor); -} - -static int fsl_qspi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) -{ - int ret; - struct fsl_qspi *q = nor->priv; - - ret = fsl_qspi_runcmd(q, opcode, 0, len); - if (ret) - return ret; - - fsl_qspi_read_data(q, len, buf); - return 0; -} - -static int fsl_qspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) -{ - struct fsl_qspi *q = nor->priv; - int ret; - - if (!buf) { - ret = fsl_qspi_runcmd(q, opcode, 0, 1); - if (ret) - return ret; - - if (opcode == SPINOR_OP_CHIP_ERASE) - fsl_qspi_invalid(q); - - } else if (len > 0) { - ret = fsl_qspi_nor_write(q, nor, opcode, 0, - (u32 *)buf, len); - if (ret > 0) - return 0; - } else { - dev_err(q->dev, "invalid cmd %d\n", opcode); - ret = -EINVAL; - } - - return ret; -} - -static ssize_t fsl_qspi_write(struct spi_nor *nor, loff_t to, - size_t len, const u_char *buf) -{ - struct fsl_qspi *q = nor->priv; - ssize_t ret = fsl_qspi_nor_write(q, nor, nor->program_opcode, to, - (u32 *)buf, len); - - /* invalid the data in the AHB buffer. */ - fsl_qspi_invalid(q); - return ret; -} - -static ssize_t fsl_qspi_read(struct spi_nor *nor, loff_t from, - size_t len, u_char *buf) -{ - struct fsl_qspi *q = nor->priv; - u8 cmd = nor->read_opcode; - - /* if necessary,ioremap buffer before AHB read, */ - if (!q->ahb_addr) { - q->memmap_offs = q->chip_base_addr + from; - q->memmap_len = len > QUADSPI_MIN_IOMAP ? len : QUADSPI_MIN_IOMAP; - - q->ahb_addr = ioremap_nocache( - q->memmap_phy + q->memmap_offs, - q->memmap_len); - if (!q->ahb_addr) { - dev_err(q->dev, "ioremap failed\n"); - return -ENOMEM; - } - /* ioremap if the data requested is out of range */ - } else if (q->chip_base_addr + from < q->memmap_offs - || q->chip_base_addr + from + len > - q->memmap_offs + q->memmap_len) { - iounmap(q->ahb_addr); - - q->memmap_offs = q->chip_base_addr + from; - q->memmap_len = len > QUADSPI_MIN_IOMAP ? len : QUADSPI_MIN_IOMAP; - q->ahb_addr = ioremap_nocache( - q->memmap_phy + q->memmap_offs, - q->memmap_len); - if (!q->ahb_addr) { - dev_err(q->dev, "ioremap failed\n"); - return -ENOMEM; - } - } - - dev_dbg(q->dev, "cmd [%x],read from %p, len:%zd\n", - cmd, q->ahb_addr + q->chip_base_addr + from - q->memmap_offs, - len); - - /* Read out the data directly from the AHB buffer.*/ - memcpy(buf, q->ahb_addr + q->chip_base_addr + from - q->memmap_offs, - len); - - return len; -} - -static int fsl_qspi_erase(struct spi_nor *nor, loff_t offs) -{ - struct fsl_qspi *q = nor->priv; - int ret; - - dev_dbg(nor->dev, "%dKiB at 0x%08x:0x%08x\n", - nor->mtd.erasesize / 1024, q->chip_base_addr, (u32)offs); - - ret = fsl_qspi_runcmd(q, nor->erase_opcode, offs, 0); - if (ret) - return ret; - - fsl_qspi_invalid(q); - return 0; -} - -static int fsl_qspi_prep(struct spi_nor *nor, enum spi_nor_ops ops) -{ - struct fsl_qspi *q = nor->priv; - int ret; - - mutex_lock(&q->lock); - - ret = fsl_qspi_clk_prep_enable(q); - if (ret) - goto err_mutex; - - fsl_qspi_set_base_addr(q, nor); - return 0; - -err_mutex: - mutex_unlock(&q->lock); - return ret; -} - -static void fsl_qspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops) -{ - struct fsl_qspi *q = nor->priv; - - fsl_qspi_clk_disable_unprep(q); - mutex_unlock(&q->lock); -} - -static int fsl_qspi_probe(struct platform_device *pdev) -{ - const struct spi_nor_hwcaps hwcaps = { - .mask = SNOR_HWCAPS_READ_1_1_4 | - SNOR_HWCAPS_PP, - }; - struct device_node *np = pdev->dev.of_node; - struct device *dev = &pdev->dev; - struct fsl_qspi *q; - struct resource *res; - struct spi_nor *nor; - struct mtd_info *mtd; - int ret, i = 0; - - q = devm_kzalloc(dev, sizeof(*q), GFP_KERNEL); - if (!q) - return -ENOMEM; - - q->nor_num = of_get_child_count(dev->of_node); - if (!q->nor_num || q->nor_num > FSL_QSPI_MAX_CHIP) - return -ENODEV; - - q->dev = dev; - q->devtype_data = of_device_get_match_data(dev); - if (!q->devtype_data) - return -ENODEV; - platform_set_drvdata(pdev, q); - - /* find the resources */ - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "QuadSPI"); - q->iobase = devm_ioremap_resource(dev, res); - if (IS_ERR(q->iobase)) - return PTR_ERR(q->iobase); - - q->big_endian = of_property_read_bool(np, "big-endian"); - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "QuadSPI-memory"); - if (!devm_request_mem_region(dev, res->start, resource_size(res), - res->name)) { - dev_err(dev, "can't request region for resource %pR\n", res); - return -EBUSY; - } - - q->memmap_phy = res->start; - - /* find the clocks */ - q->clk_en = devm_clk_get(dev, "qspi_en"); - if (IS_ERR(q->clk_en)) - return PTR_ERR(q->clk_en); - - q->clk = devm_clk_get(dev, "qspi"); - if (IS_ERR(q->clk)) - return PTR_ERR(q->clk); - - ret = fsl_qspi_clk_prep_enable(q); - if (ret) { - dev_err(dev, "can not enable the clock\n"); - goto clk_failed; - } - - /* find the irq */ - ret = platform_get_irq(pdev, 0); - if (ret < 0) { - dev_err(dev, "failed to get the irq: %d\n", ret); - goto irq_failed; - } - - ret = devm_request_irq(dev, ret, - fsl_qspi_irq_handler, 0, pdev->name, q); - if (ret) { - dev_err(dev, "failed to request irq: %d\n", ret); - goto irq_failed; - } - - ret = fsl_qspi_nor_setup(q); - if (ret) - goto irq_failed; - - if (of_get_property(np, "fsl,qspi-has-second-chip", NULL)) - q->has_second_chip = true; - - mutex_init(&q->lock); - - /* iterate the subnodes. */ - for_each_available_child_of_node(dev->of_node, np) { - /* skip the holes */ - if (!q->has_second_chip) - i *= 2; - - nor = &q->nor[i]; - mtd = &nor->mtd; - - nor->dev = dev; - spi_nor_set_flash_node(nor, np); - nor->priv = q; - - if (q->nor_num > 1 && !mtd->name) { - int spiflash_idx; - - ret = of_property_read_u32(np, "reg", &spiflash_idx); - if (!ret) { - mtd->name = devm_kasprintf(dev, GFP_KERNEL, - "%s-%d", - dev_name(dev), - spiflash_idx); - if (!mtd->name) { - ret = -ENOMEM; - goto mutex_failed; - } - } else { - dev_warn(dev, "reg property is missing\n"); - } - } - - /* fill the hooks */ - nor->read_reg = fsl_qspi_read_reg; - nor->write_reg = fsl_qspi_write_reg; - nor->read = fsl_qspi_read; - nor->write = fsl_qspi_write; - nor->erase = fsl_qspi_erase; - - nor->prepare = fsl_qspi_prep; - nor->unprepare = fsl_qspi_unprep; - - ret = of_property_read_u32(np, "spi-max-frequency", - &q->clk_rate); - if (ret < 0) - goto mutex_failed; - - /* set the chip address for READID */ - fsl_qspi_set_base_addr(q, nor); - - ret = spi_nor_scan(nor, NULL, &hwcaps); - if (ret) - goto mutex_failed; - - ret = mtd_device_register(mtd, NULL, 0); - if (ret) - goto mutex_failed; - - /* Set the correct NOR size now. */ - if (q->nor_size == 0) { - q->nor_size = mtd->size; - - /* Map the SPI NOR to accessiable address */ - fsl_qspi_set_map_addr(q); - } - - /* - * The TX FIFO is 64 bytes in the Vybrid, but the Page Program - * may writes 265 bytes per time. The write is working in the - * unit of the TX FIFO, not in the unit of the SPI NOR's page - * size. - * - * So shrink the spi_nor->page_size if it is larger then the - * TX FIFO. - */ - if (nor->page_size > q->devtype_data->txfifo) - nor->page_size = q->devtype_data->txfifo; - - i++; - } - - /* finish the rest init. */ - ret = fsl_qspi_nor_setup_last(q); - if (ret) - goto last_init_failed; - - fsl_qspi_clk_disable_unprep(q); - return 0; - -last_init_failed: - for (i = 0; i < q->nor_num; i++) { - /* skip the holes */ - if (!q->has_second_chip) - i *= 2; - mtd_device_unregister(&q->nor[i].mtd); - } -mutex_failed: - mutex_destroy(&q->lock); -irq_failed: - fsl_qspi_clk_disable_unprep(q); -clk_failed: - dev_err(dev, "Freescale QuadSPI probe failed\n"); - return ret; -} - -static int fsl_qspi_remove(struct platform_device *pdev) -{ - struct fsl_qspi *q = platform_get_drvdata(pdev); - int i; - - for (i = 0; i < q->nor_num; i++) { - /* skip the holes */ - if (!q->has_second_chip) - i *= 2; - mtd_device_unregister(&q->nor[i].mtd); - } - - /* disable the hardware */ - qspi_writel(q, QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR); - qspi_writel(q, 0x0, q->iobase + QUADSPI_RSER); - - mutex_destroy(&q->lock); - - if (q->ahb_addr) - iounmap(q->ahb_addr); - - return 0; -} - -static int fsl_qspi_suspend(struct platform_device *pdev, pm_message_t state) -{ - return 0; -} - -static int fsl_qspi_resume(struct platform_device *pdev) -{ - int ret; - struct fsl_qspi *q = platform_get_drvdata(pdev); - - ret = fsl_qspi_clk_prep_enable(q); - if (ret) - return ret; - - fsl_qspi_nor_setup(q); - fsl_qspi_set_map_addr(q); - fsl_qspi_nor_setup_last(q); - - fsl_qspi_clk_disable_unprep(q); - - return 0; -} - -static struct platform_driver fsl_qspi_driver = { - .driver = { - .name = "fsl-quadspi", - .of_match_table = fsl_qspi_dt_ids, - }, - .probe = fsl_qspi_probe, - .remove = fsl_qspi_remove, - .suspend = fsl_qspi_suspend, - .resume = fsl_qspi_resume, -}; -module_platform_driver(fsl_qspi_driver); - -MODULE_DESCRIPTION("Freescale QuadSPI Controller Driver"); -MODULE_AUTHOR("Freescale Semiconductor Inc."); -MODULE_LICENSE("GPL v2"); From patchwork Tue Nov 27 10:24:36 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Frieder Schrempf X-Patchwork-Id: 1003767 X-Patchwork-Delegate: boris.brezillon@free-electrons.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=lists.infradead.org (client-ip=2607:7c80:54:e::133; helo=bombadil.infradead.org; envelope-from=linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=kontron.de Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="eKjRon7X"; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=infradead.org header.i=@infradead.org header.b="Uof50uXh"; dkim-atps=neutral Received: from bombadil.infradead.org (bombadil.infradead.org [IPv6:2607:7c80:54:e::133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 4340PG1dhRz9s3Z for ; Tue, 27 Nov 2018 21:28:34 +1100 (AEDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:In-Reply-To:References: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=WtX0UXX/b8+CbUKXlBeUQz0h1Ib+ejq3LgxgYZHtbRU=; b=eKjRon7XFAqkrs Dlh77xS0F1Z369iaij7pHJkakKwKwpBpch8OqTwSfCt/Wly6AdvvAfp8l9LmMLTLClHs03N0rfpTe hPxOtWgY8kzQ5TPWyc493e8tJYjXRwlB2mj2qEHQA8FTLRfovXsLbUdcMNDWPS+ycWmQis18lFqjN eSVIcmoNyHdFpP1mZCw7leWL+ikeQZve+BiyO7vqWBgdqcRfV36L+XOb5avTwas+wZlgG51TFEgsn 26ccMhVTknYO/V0uCOLyNIKR/ejhPikwXgjk1RcEQ88GPdNHLacqQ7T6R9l6y2eHDabQcOxIcUrRA FIcYOE0J1LB/IQESG+XA==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRabU-0003dJ-6j; Tue, 27 Nov 2018 10:28:28 +0000 Received: from casper.infradead.org ([2001:8b0:10b:1236::1]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRab4-0002uu-7A; Tue, 27 Nov 2018 10:28:03 +0000 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=casper.20170209; h=MIME-Version:Content-Transfer-Encoding: Content-Type:In-Reply-To:References:Message-ID:Date:Subject:CC:To:From:Sender :Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=0qD1TS1mAOmHhF6dE3emTUrL/b81t8qAljzsOfMoUFc=; b=Uof50uXhy6JXz/fjNX6MD/J94O pxJiQ7ZauZucln5AkGsl9Ed4/ylm0GbmbSe8BA4cseGTOzGYCweVlkHmS+gYMu19pOj++SqIU6Rx6 pZ0QMEbK9PAMMnrAEOgDSylf5kE1nDe81rlcmlLNQl5kYyRv9PxBkiC5bhh9O5z+cOywG6kgcDwD3 wnpFU5aJyTq63t0Jy/opdJrRC26cMThBuROi/DcM0pyzDLQwqqt3nYg5oj0lOco/05JAfIRBDssLl pjjwNv3aia+NTHQQspk4uJwS23jRIieIwUbkTQClFQJ/ZPa5EqtisyvuIGrKWjJcmBRQ+Q4W1V3Z1 tY3B81Cg==; Received: from skedge03.snt-world.com ([91.208.41.68]) by casper.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRaXw-0006Vl-45; Tue, 27 Nov 2018 10:24:51 +0000 Received: from sntmail14r.snt-is.com (unknown [10.203.32.184]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by skedge03.snt-world.com (Postfix) with ESMTPS id BDC4F67A70A; Tue, 27 Nov 2018 11:24:36 +0100 (CET) Received: from sntmail12r.snt-is.com (10.203.32.182) by sntmail14r.snt-is.com (10.203.32.184) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1466.3; Tue, 27 Nov 2018 11:24:36 +0100 Received: from sntmail12r.snt-is.com ([fe80::e551:8750:7bba:3305]) by sntmail12r.snt-is.com ([fe80::e551:8750:7bba:3305%5]) with mapi id 15.01.1466.003; Tue, 27 Nov 2018 11:24:36 +0100 From: Schrempf Frieder To: "linux-mtd@lists.infradead.org" , "boris.brezillon@bootlin.com" , "linux-spi@vger.kernel.org" , Shawn Guo , Li Yang , Rob Herring , Mark Rutland Subject: [PATCH v6 7/9] ARM: dts: ls1021a: Remove fsl, qspi-has-second-chip as it is not used Thread-Topic: [PATCH v6 7/9] ARM: dts: ls1021a: Remove fsl,qspi-has-second-chip as it is not used Thread-Index: AQHUhjtl7MHDWa24eEqwt7mGMpoc+g== Date: Tue, 27 Nov 2018 10:24:36 +0000 Message-ID: <1543314174-28580-8-git-send-email-frieder.schrempf@kontron.de> References: <1543314174-28580-1-git-send-email-frieder.schrempf@kontron.de> In-Reply-To: <1543314174-28580-1-git-send-email-frieder.schrempf@kontron.de> Accept-Language: de-DE, en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [172.25.9.43] x-c2processedorg: 51b406b7-48a2-4d03-b652-521f56ac89f3 MIME-Version: 1.0 X-SnT-MailScanner-Information: Please contact the ISP for more information X-SnT-MailScanner-ID: BDC4F67A70A.A19FB X-SnT-MailScanner: Found to be clean X-SnT-MailScanner-SpamCheck: X-SnT-MailScanner-From: frieder.schrempf@kontron.de X-SnT-MailScanner-To: boris.brezillon@bootlin.com, broonie@kernel.org, computersforpeace@gmail.com, david.wolfe@nxp.com, devicetree@vger.kernel.org, dwmw2@infradead.org, fabio.estevam@nxp.com, han.xu@nxp.com, leoyang.li@nxp.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org, linux-spi@vger.kernel.org, marek.vasut@gmail.com, mark.rutland@arm.com, miquel.raynal@bootlin.com, prabhakar.kushwaha@nxp.com, richard@nod.at, robh+dt@kernel.org, shawnguo@kernel.org, yogeshnarayan.gaur@nxp.com X-Spam-Status: No X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20181127_102448_306618_864C6262 X-CRM114-Status: GOOD ( 12.75 ) X-Spam-Score: -0.0 (/) X-Spam-Report: SpamAssassin version 3.4.1 on casper.infradead.org summary: Content analysis details: (-0.0 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no trust [91.208.41.68 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record X-BeenThere: linux-mtd@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: "devicetree@vger.kernel.org" , "yogeshnarayan.gaur@nxp.com" , "richard@nod.at" , "prabhakar.kushwaha@nxp.com" , "linux-kernel@vger.kernel.org" , Schrempf Frieder , "marek.vasut@gmail.com" , "han.xu@nxp.com" , "broonie@kernel.org" , "miquel.raynal@bootlin.com" , "fabio.estevam@nxp.com" , "david.wolfe@nxp.com" , "computersforpeace@gmail.com" , "dwmw2@infradead.org" , "linux-arm-kernel@lists.infradead.org" Sender: "linux-mtd" Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org After switching to the new FSL QSPI driver the property 'fsl,qspi-has-second-chip' is not needed anymore. The driver now uses the 'reg' property to determine the bus and the chipselect. Signed-off-by: Frieder Schrempf --- arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts index 6a83f30..d3a1a73 100644 --- a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts +++ b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts @@ -203,7 +203,6 @@ }; &qspi { - fsl,qspi-has-second-chip; status = "okay"; flash: flash@0 { From patchwork Tue Nov 27 10:24:37 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Frieder Schrempf X-Patchwork-Id: 1003764 X-Patchwork-Delegate: boris.brezillon@free-electrons.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=lists.infradead.org (client-ip=2607:7c80:54:e::133; helo=bombadil.infradead.org; envelope-from=linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=kontron.de Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="nqsIAgGs"; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=infradead.org header.i=@infradead.org header.b="A+vNvW2L"; dkim-atps=neutral Received: from bombadil.infradead.org (bombadil.infradead.org [IPv6:2607:7c80:54:e::133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 4340LW2L9pz9s3l for ; Tue, 27 Nov 2018 21:26:11 +1100 (AEDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:In-Reply-To:References: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=K1ugNTcssOubbS7UD5IQAeWSBEb8xLFPvSnBYIE26mQ=; b=nqsIAgGsLUYFkg e2z1uA7go0nqG+Nbr0StbbYhhBeuUTynqFdR5Fti9TTDy2IypWRfwSqEHHly1tweoKUZR763gimAE GWj1D4RtcDk7iRGgK86FpvEAFd7vkX/yiywwPeQOEMnh2jJBkldVj0oru/BYl49MjISNoYfubKAy6 KysejIgKKok5+g2YwZ3eu+zXO9Rr7VLrP+HFX2kKQmCYWY1Eb2mc7Dzf8pY/JsnSqjDQhLKFGkIPE 6hP56gdPR3NGVDPBzpB5q4MxS7gXLj9UukVy3WkyjZJaCIRQHdyl0Xax52Kn3KFWBda8+nJVoW2xr 7PVgQ517dDXz2xERtC8Q==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRaZC-0001nn-7l; Tue, 27 Nov 2018 10:26:06 +0000 Received: from merlin.infradead.org ([2001:8b0:10b:1231::1]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRaYA-0007w9-QO; Tue, 27 Nov 2018 10:25:02 +0000 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=merlin.20170209; h=MIME-Version:Content-Transfer-Encoding: Content-Type:In-Reply-To:References:Message-ID:Date:Subject:CC:To:From:Sender :Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=PfvQS1WXcqjOICQv1M56sLn16ITVjMl88DT2ua99G4k=; b=A+vNvW2LaJW2HXFh8RdwaTya1G RzxYBBSBBRWFGnOUA0VvCLy9cV6yV+QO6MvtXnXRmlJmyNlEPBIBDD49WpntJWcdofUR+iZcoIuXN jqoSadMlH6WXLYRMOGL6DnRU4FCVJ4wnQLqWqXTULHOQeulWVtGEkSow3d2IXLBXcS0nAZ9INzTUg VXkNJcTIeW+uUkNKQCU1NVPGJVY3ql18Wl5z4+LRhGMwRFVEesfmfEBK9aW9rBR8GRDK40pVdFeD1 0kiFsqzCm9MACnmg+Wqzn4tjKXdxK1b0BJRO+rZkCXoZ48FGhOGSCOF2Sifz7hDKCkhZWu7ADie3U VCkjogFA==; Received: from skedge04.snt-world.com ([91.208.41.69]) by merlin.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRaY7-0000mD-MW; Tue, 27 Nov 2018 10:25:00 +0000 Received: from sntmail10s.snt-is.com (unknown [10.203.32.183]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by skedge04.snt-world.com (Postfix) with ESMTPS id EEF1E67A888; Tue, 27 Nov 2018 11:24:37 +0100 (CET) Received: from sntmail12r.snt-is.com (10.203.32.182) by sntmail10s.snt-is.com (10.203.32.183) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1466.3; Tue, 27 Nov 2018 11:24:37 +0100 Received: from sntmail12r.snt-is.com ([fe80::e551:8750:7bba:3305]) by sntmail12r.snt-is.com ([fe80::e551:8750:7bba:3305%5]) with mapi id 15.01.1466.003; Tue, 27 Nov 2018 11:24:37 +0100 From: Schrempf Frieder To: "linux-mtd@lists.infradead.org" , "boris.brezillon@bootlin.com" , "linux-spi@vger.kernel.org" , Shawn Guo , Li Yang Subject: [PATCH v6 8/9] ARM64: dts: ls1046a: Remove fsl, qspi-has-second-chip as it is not used Thread-Topic: [PATCH v6 8/9] ARM64: dts: ls1046a: Remove fsl,qspi-has-second-chip as it is not used Thread-Index: AQHUhjtmbqHX+PuXI0SP/XJ4KEJePA== Date: Tue, 27 Nov 2018 10:24:37 +0000 Message-ID: <1543314174-28580-9-git-send-email-frieder.schrempf@kontron.de> References: <1543314174-28580-1-git-send-email-frieder.schrempf@kontron.de> In-Reply-To: <1543314174-28580-1-git-send-email-frieder.schrempf@kontron.de> Accept-Language: de-DE, en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [172.25.9.43] x-c2processedorg: 51b406b7-48a2-4d03-b652-521f56ac89f3 MIME-Version: 1.0 X-SnT-MailScanner-Information: Please contact the ISP for more information X-SnT-MailScanner-ID: EEF1E67A888.A22FA X-SnT-MailScanner: Found to be clean X-SnT-MailScanner-SpamCheck: X-SnT-MailScanner-From: frieder.schrempf@kontron.de X-SnT-MailScanner-To: boris.brezillon@bootlin.com, broonie@kernel.org, computersforpeace@gmail.com, david.wolfe@nxp.com, devicetree@vger.kernel.org, dwmw2@infradead.org, fabio.estevam@nxp.com, han.xu@nxp.com, leoyang.li@nxp.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org, linux-spi@vger.kernel.org, marek.vasut@gmail.com, mark.rutland@arm.com, miquel.raynal@bootlin.com, prabhakar.kushwaha@nxp.com, richard@nod.at, robh+dt@kernel.org, shawnguo@kernel.org, yogeshnarayan.gaur@nxp.com X-Spam-Status: No X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20181127_052500_072701_0A55B962 X-CRM114-Status: GOOD ( 12.27 ) X-Spam-Score: -0.0 (/) X-Spam-Report: SpamAssassin version 3.4.2 on merlin.infradead.org summary: Content analysis details: (-0.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no trust [91.208.41.69 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record X-BeenThere: linux-mtd@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Mark Rutland , "devicetree@vger.kernel.org" , "yogeshnarayan.gaur@nxp.com" , Rob Herring , "richard@nod.at" , "prabhakar.kushwaha@nxp.com" , "linux-kernel@vger.kernel.org" , Schrempf Frieder , "marek.vasut@gmail.com" , "han.xu@nxp.com" , "broonie@kernel.org" , "miquel.raynal@bootlin.com" , "fabio.estevam@nxp.com" , "david.wolfe@nxp.com" , "computersforpeace@gmail.com" , "dwmw2@infradead.org" , "linux-arm-kernel@lists.infradead.org" Sender: "linux-mtd" Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org After switching to the new FSL QSPI driver the property 'fsl,qspi-has-second-chip' is not needed anymore. The driver now uses the 'reg' property to determine the bus and the chipselect. Signed-off-by: Frieder Schrempf --- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 51cbd50..9e083f6 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -213,7 +213,6 @@ clock-names = "qspi_en", "qspi"; clocks = <&clockgen 4 1>, <&clockgen 4 1>; big-endian; - fsl,qspi-has-second-chip; status = "disabled"; }; From patchwork Tue Nov 27 10:24:50 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Frieder Schrempf X-Patchwork-Id: 1003766 X-Patchwork-Delegate: boris.brezillon@free-electrons.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=lists.infradead.org (client-ip=2607:7c80:54:e::133; helo=bombadil.infradead.org; envelope-from=linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=kontron.de Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="RGkg/iMd"; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=infradead.org header.i=@infradead.org header.b="S9iFBPzR"; dkim-atps=neutral Received: from bombadil.infradead.org (bombadil.infradead.org [IPv6:2607:7c80:54:e::133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 4340Nt48Mcz9s29 for ; Tue, 27 Nov 2018 21:28:14 +1100 (AEDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:In-Reply-To:References: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=iPi9IwL9l26P0sH/1ZLqvrX3xYIJaFfMs3kbKEG0d74=; b=RGkg/iMdDlM/mO F+jDn7esZz4prf3qTnKapcalfFwcc+fr0HURXlFIRaTxQHPWstTKAClrQ4MChZ0Wh0ARzITq8yHG1 /Ccp8LTsdH7ftLpwF0RBssrnEPH9uQO4Mypxl2Gx3VR1HPfTcH4yr2ZbTF5MzLcgGMIbEX0oqKSpl wjPPLMaYiucVmELMK7YS/ETue/XOCofOUsyxT+QGGFbOSbpt0OYiq83IAx3nyhdTybrZk0hPn1k0/ v17h5ETp/TdrbEAx58t5kxv1g1jPT2V7CnUmKKGSNkQg7PIj2pfwkA+0qtuexy6F4DrKgTFywVT5L DjPnX6w0eyZTavXv6TPg==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRab9-0003II-T6; Tue, 27 Nov 2018 10:28:07 +0000 Received: from casper.infradead.org ([2001:8b0:10b:1236::1]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRaaz-0002uu-Om for linux-mtd@bombadil.infradead.org; Tue, 27 Nov 2018 10:27:57 +0000 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=casper.20170209; h=MIME-Version:Content-Transfer-Encoding: Content-Type:In-Reply-To:References:Message-ID:Date:Subject:CC:To:From:Sender :Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=wQFH+UovItreo9YtoC5dVuj/bb3HxwaRboYMUR/Wxlo=; b=S9iFBPzRzD/NCWohHIpkL2Zr3A ZdH8mSuH3DGz1Yv3zI/8/e7Kw1WRAlAT18Uu7bPV1PLmpw/yM5/aXL/inzGeju1Bi8iqpUAHFb7OW dUjVWOWY1LCc+M1Blt7XAcbdarmKZlHyVUG2aZFZvAD9aSv5qYiUAgPNy494j5ZbnPDhnlXrylszK s8uedRvV5GlpsHDjXV4yPwWa7/HdF8v2gJ4pXVQa+Ipn7SEGqQmXwlKlJcy72TxqOlPvEVKgmUeFv HxN+5qyCO8VpPnvM7GCatcUS1vEZokBYelE7RysOaPgVcp4Quw/ldLrrF5SDhUaga4saWX5HwO7G5 Wr/MsP3A==; Received: from skedge03.snt-world.com ([91.208.41.68]) by casper.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1gRaYF-0006Z7-Oc for linux-mtd@lists.infradead.org; Tue, 27 Nov 2018 10:25:10 +0000 Received: from sntmail11s.snt-is.com (unknown [10.203.32.181]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by skedge03.snt-world.com (Postfix) with ESMTPS id 53A5D67A70A; Tue, 27 Nov 2018 11:24:51 +0100 (CET) Received: from sntmail12r.snt-is.com (10.203.32.182) by sntmail11s.snt-is.com (10.203.32.181) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1466.3; Tue, 27 Nov 2018 11:24:50 +0100 Received: from sntmail12r.snt-is.com ([fe80::e551:8750:7bba:3305]) by sntmail12r.snt-is.com ([fe80::e551:8750:7bba:3305%5]) with mapi id 15.01.1466.003; Tue, 27 Nov 2018 11:24:50 +0100 From: Schrempf Frieder To: "linux-mtd@lists.infradead.org" , "boris.brezillon@bootlin.com" , "linux-spi@vger.kernel.org" , "linux-kernel@vger.kernel.org" Subject: [PATCH v6 9/9] MAINTAINERS: Move the Freescale QSPI driver to the SPI framework Thread-Topic: [PATCH v6 9/9] MAINTAINERS: Move the Freescale QSPI driver to the SPI framework Thread-Index: AQHUhjttbAAHhZHyQEmwDRYmlezXcA== Date: Tue, 27 Nov 2018 10:24:50 +0000 Message-ID: <1543314174-28580-10-git-send-email-frieder.schrempf@kontron.de> References: <1543314174-28580-1-git-send-email-frieder.schrempf@kontron.de> In-Reply-To: <1543314174-28580-1-git-send-email-frieder.schrempf@kontron.de> Accept-Language: de-DE, en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [172.25.9.43] x-c2processedorg: 51b406b7-48a2-4d03-b652-521f56ac89f3 MIME-Version: 1.0 X-SnT-MailScanner-Information: Please contact the ISP for more information X-SnT-MailScanner-ID: 53A5D67A70A.AEED9 X-SnT-MailScanner: Found to be clean X-SnT-MailScanner-SpamCheck: X-SnT-MailScanner-From: frieder.schrempf@kontron.de X-SnT-MailScanner-To: akpm@linux-foundation.org, arnd@arndb.de, boris.brezillon@bootlin.com, broonie@kernel.org, computersforpeace@gmail.com, davem@davemloft.net, david.wolfe@nxp.com, dwmw2@infradead.org, fabio.estevam@nxp.com, gregkh@linuxfoundation.org, han.xu@nxp.com, linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org, linux-spi@vger.kernel.org, marek.vasut@gmail.com, mchehab+samsung@kernel.org, miquel.raynal@bootlin.com, nicolas.ferre@microchip.com, prabhakar.kushwaha@nxp.com, richard@nod.at, shawnguo@kernel.org, yogeshnarayan.gaur@nxp.com X-Spam-Status: No X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20181127_102507_946380_58391069 X-CRM114-Status: GOOD ( 14.75 ) X-Spam-Score: -0.0 (/) X-Spam-Report: SpamAssassin version 3.4.1 on casper.infradead.org summary: Content analysis details: (-0.0 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no trust [91.208.41.68 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record X-BeenThere: linux-mtd@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: "yogeshnarayan.gaur@nxp.com" , Arnd Bergmann , Mauro Carvalho Chehab , Greg Kroah-Hartman , "richard@nod.at" , "prabhakar.kushwaha@nxp.com" , Nicolas Ferre , "shawnguo@kernel.org" , "marek.vasut@gmail.com" , "han.xu@nxp.com" , "broonie@kernel.org" , Schrempf Frieder , "miquel.raynal@bootlin.com" , "fabio.estevam@nxp.com" , "david.wolfe@nxp.com" , Andrew Morton , "computersforpeace@gmail.com" , "dwmw2@infradead.org" , "David S. Miller" Sender: "linux-mtd" Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org The driver was ported to the SPI framework so it can be used as a generic SPI memory driver and not only for SPI NOR. Reflect this transition in the MAINTAINERS file. Signed-off-by: Frieder Schrempf --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index f485597..1ff3c5b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5932,9 +5932,9 @@ F: Documentation/devicetree/bindings/ptp/ptp-qoriq.txt FREESCALE QUAD SPI DRIVER M: Han Xu -L: linux-mtd@lists.infradead.org +L: linux-spi@vger.kernel.org S: Maintained -F: drivers/mtd/spi-nor/fsl-quadspi.c +F: drivers/spi/spi-fsl-qspi.c FREESCALE QUICC ENGINE LIBRARY M: Qiang Zhao