From patchwork Fri May 18 11:16:00 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Simon Horman X-Patchwork-Id: 916281 Return-Path: X-Original-To: incoming-imx@patchwork.ozlabs.org Delivered-To: patchwork-incoming-imx@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=lists.infradead.org (client-ip=2607:7c80:54:e::133; helo=bombadil.infradead.org; envelope-from=linux-arm-kernel-bounces+incoming-imx=patchwork.ozlabs.org@lists.infradead.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=verge.net.au Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="KbUOB5aU"; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=infradead.org header.i=@infradead.org header.b="Es7Ak5c2"; dkim=fail reason="signature verification failed" (1024-bit key; unprotected) header.d=verge.net.au header.i=@verge.net.au header.b="iAckwp0l"; dkim-atps=neutral Received: from bombadil.infradead.org (bombadil.infradead.org [IPv6:2607:7c80:54:e::133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 40nShj5sBBz9s2k for ; Fri, 18 May 2018 22:51:01 +1000 (AEST) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:Message-Id:Date:Subject:To :From:Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:In-Reply-To:References: List-Owner; bh=PG8322bT12kJ/9C6VaG+zfOD+OOYMnhBNhD8rxUxN4w=; b=KbUOB5aUvn2lLl H0SR0awk3b3tjva1mX1kRsvkcahsk0uDYiVRKEC93uQRTn0JujhBhnxAupDmcU3AVoFIBy3xgG24u /oq9NDez1v4WyzLsKAyNDlfE3owRjwz5yrdou1FchOHz2ixxWfbFsFNeqjTAzpUzwaayI0XBNGvhm T/+UmaWb8Sd8OntQM1OSzLbLXXYTu4xQzhGR9qV+8pwu5n6SZZ5DIYTR/ctr7KlNMHP+0C433XjQl fzgjJpvKBGcicJld+WEyrK8t4XdD478wbXdfg5AHjBbvmSCjB2lo6NP7BuFcgfPf9jkWXA6v8l8md nRs1nwWIa59ljzHtoBPQ==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1fJeqT-0002FB-Nh; Fri, 18 May 2018 12:50:53 +0000 Received: from casper.infradead.org ([2001:8b0:10b:1236::1]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1fJecv-0000Es-R6 for linux-arm-kernel@bombadil.infradead.org; Fri, 18 May 2018 12:36:54 +0000 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=casper.20170209; h=Content-Transfer-Encoding:Content-Type: MIME-Version:Message-Id:Date:Subject:Cc:To:From:Sender:Reply-To:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:In-Reply-To:References:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=ECY6MunDL8SIk8/7YeaProWVe6bxoQwKayL/TsVWigM=; b=Es7Ak5c2L1kUPt9G3Heaz9WgMy oCRyxICJulNx1B3dOrTfs9Ig4UjbSuKo6fzrZq15Sz5jqa2zRtDZXEqc3868EXrBM+AnbfoMVDTXY qCGLc2QLo/QJXXr6mHokRW0kQ2rbqJmTQbQdp8HIYFXqA1aXC1m7UNS250ePu+NCzrEU9xqDiWlCr yqXAdUuR75D/lmGwdqbzomft3Kac4Zb8ugQefBykXVi3X/88b852j6DczaSfI6iS0BPCCgLJ923uI 1DVcPjRM4Kgm+paj9ImwDrIFf4e+sSLPlkucsyUVrnMvDavVJ32YWOlPyzR5Ou3eBR7/RMy42yZPG 33OHweiw==; Received: from kirsty.vergenet.net ([202.4.237.240]) by casper.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1fJeIF-00057o-Vk for linux-arm-kernel@lists.infradead.org; Fri, 18 May 2018 12:15:35 +0000 Received: from reginn.horms.nl (watermunt.horms.nl [80.127.179.77]) by kirsty.vergenet.net (Postfix) with ESMTPA id 9C62125B739; Fri, 18 May 2018 21:16:05 +1000 (AEST) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=verge.net.au; s=mail; t=1526642166; bh=HM/BpxSajHU6SBDBPHEfofJ99AnA9l3yd1cAN1cr7KU=; h=From:To:Cc:Subject:Date:From; b=iAckwp0l3jbSb+HA45SfDHlZ02p8oGzZfR1IbqLO83Kd324A1DiVOVDBZzSVIw97i zRk43E9OEiXV9+r6dI5Z0Ej3YhkPj3De0ShIsEzuMAhvqvV0giypdmStq4Nq91dJAQ ut712UwhLH2ShPHpRbiGUfizOSfj/rbe1nIydNRs= Received: by reginn.horms.nl (Postfix, from userid 7100) id 826DB942C4A; Fri, 18 May 2018 13:16:03 +0200 (CEST) From: Simon Horman To: arm@kernel.org Subject: [GIT PULL] Renesas ARM64 Based SoC DT Updates for v4.18 Date: Fri, 18 May 2018 13:16:00 +0200 Message-Id: X-Mailer: git-send-email 2.11.0 MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20180518_131533_238117_8DD30F08 X-CRM114-Status: GOOD ( 23.33 ) X-Spam-Score: -2.2 (--) X-Spam-Report: SpamAssassin version 3.4.1 on casper.infradead.org summary: Content analysis details: (-2.2 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at http://www.dnswl.org/, medium trust [202.4.237.240 listed in list.dnswl.org] 0.2 HEADER_FROM_DIFFERENT_DOMAINS From and EnvelopeFrom 2nd level mail domains are different -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Arnd Bergmann , Kevin Hilman , Magnus Damm , linux-renesas-soc@vger.kernel.org, Olof Johansson , Simon Horman , linux-arm-kernel@lists.infradead.org Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+incoming-imx=patchwork.ozlabs.org@lists.infradead.org List-Id: linux-imx-kernel.lists.patchwork.ozlabs.org Hi Olof, Hi Kevin, Hi Arnd, Please consider these Renesas ARM64 based SoC DT updates for v4.18. The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338: Linux 4.17-rc1 (2018-04-15 18:24:20 -0700) are available in the git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm64-dt-for-v4.18 for you to fetch changes up to 908001d778eba06ee1d832863d4e9a1e2cfd4746: arm64: dts: renesas: salvator-common: Add ADV7482 support (2018-05-18 11:52:03 +0200) ---------------------------------------------------------------- Renesas ARM64 Based SoC DT Updates for v4.18 * Cleanups: - Corresct whitespace - sort subnodes of the root and soc nodes * R-Car M3-N (r8a77965) SoC - Describe MSIOF SPI, PWM, SDHI and I2C devices in DT - Add thermal support * R-Car H3 (r8a7795) and R-Car M3-W (r8a7796) SoCs - Decrease temperature hysteresis Niklas Söderlund says "... decrease the hysteresis from 2C to 1C for the two boards we have described upstream. They have no dependencies and are ready to be accepted if the review is in favor of them." * R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs - Add address properties to rcar_sound port nodes The rcar_sound port nodes have unit names and thus should have register properties. * R-Car H3 (r8a7795), M3-W (r8a7796) V3M (r8a77970) and D3 (r8a77995) SoCs - Enable IPMMU devices Magnus Damm says "Following the policy of using DT to describe the hardware and not software support state, this series makes sure all IPMMU devices are enabled in DT for SoCs such as r8a7795, r8a7796, r8a77970 and r8a77995." * R-Car M3-N (r8a77965) and V3H (r8a77980) SoCs - Use sysc binding macros These can be used now that they are present in Linus's tree. This is a simple replacement of numeric values with symbolic ones. - Describe USB2 and USB3 devices in DT * R-Car V3M (r8a77970) SoC - Add SMP Support Geert Uytterhoeven says "This patch series enables SMP support on the R-Car V3M SoC, by adding the second Cortex-A53 CPU core. It also adds the performance monitor unit, and links it to both CPU cores." - Correct IPMMU DS1 bit number Magnus Damm says "Judging by "R-Car-Gen3-rev0.80" IPMMU IMSSTR register documentation for [R-Car V3M] the DS1 bit field should be bit 0." * R-Car V3H (r8a77980) SoC - Use CPG clock binding macros These can be used now that they are present in Linus's tree. This is a simple replacement of numeric values with symbolic ones. * R-Car V3H (r8a77980) and V3M (r8a77970) SoCs - Disable EtherAVB Sergei Shtylov says "I'm fixing the issue in the EtherAVB device nodes in the R8A779{7|8}0 device trees that missed the "status" prop, usually disabling the SoC devices in anticipation that the board device trees enable the devices according to their needs. There should be no issues with the current R8A779{7|8}0 board device trees, as all of them use EtherAVB anyway, so I'm sending the patches generated against the 'devel' branch..." * R-Car D3 (r8a77995) SoC - Describe VIN4 in DT * Ebisu board with R-Car E3 (r8a77990) SoC - Initial support: + PSCI + CPU (single) + Cache controller + Main clocks and controller + Interrupt controller + Timer + PMU + Reset controller + Product register + System controller + UART for console * Salvator-XS boards with R-Car H3 (r8a7795) SoC - Enable USB2.0 channel 3 * Salvator-X and Salvator-XS boards with M3-N (r8a77965) SoC - Enable DU Kieran Bingham "This series enables the DU for the M3-N R8A77965 SoC, and provides output on the VGA and HDMI connectors. LVDS is not yet supported or tested." * Salvator-X and Salvator-XS boards with R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs - Enable nable VIN, CSI-2 and ADV7482 Niklas Söderlund says "This series enable capture for H3, M3-W, M3-N Salvator-X and Salvator-XS boards. It also adds the VIN and CSI-2 nodes for V3M, but as the ADV7482 is on the V3M expansion boards I have chosen not include that enablement in this series." - Add PMIC DDR Backup Power config Geert Uytterhoeven says " The ROHM BD9571MWV PMIC on the Renesas Salvator-X(S) and ULCB development boards supports DDR Backup Power, which means that the DDR power rails can be kept powered while the main SoC is powered down. For this to function correctly, the DDR Backup Power configuration must be described in DT, which is the topic of this series: - The first patch adds the missing device node for the BD9571 PMIC on the ULCB boards, - The last two patches add DDR Backup Mode configuration for Salvator-X(S) and ULCB." - Add EEPROM Wolfram Sang says "Add the EEPROM found on Salvator-X and -XS boards for H3, M3-W, and M3-N on the IIC_DVFS bus." - Enable HDMI Sound * Salvator-X and Salvator-XS boards with R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs, and Draak board with R-Car D3 (r8a77995) SoC - Consistently name EtherAVB mdio pin group Geert Uytterhoeven says "When initial support was added for R-Car H3, the MDIO pin was forgotten, and the MDC pin got its own group named "mdc". During the addition of support for R-Car M3-W, this mistake was noticed. But as R-Car H3 and M3-W are pin compatible, and can be mounted on the same boards, the decision was made to just add the MDIO pin to the existing "mdc" group. Later this was extended to R-Car H3 ES2.0, and M3-N, because of pin compatibility, and to R-Car D3, in the name of consistency among R-Car Gen3 SoCs. However, this decision keeps on being questioned when adding new SoC support. Hence bite the bullet and admit our mistake, and rename the pin group from "mdc" to "mdio", like on R-Car Gen2 SoCs." * Ebisu board with R-Car E3 (r8a77990) SoC - Initial support: Memory, Main crystal, Serial console - Enable Ethernet - Revise PSCI node Yoshihiro Shimoda says "The basic support patch 2d2dbadba421 ("arm64: dts: renesas: Add Renesas R8A77990 SoC support") lacks the compatible "arm,psci-1.0" in the psci node." - Revise cache controller node Yoshihiro Shimoda says "The cache controller node should not have unit-addresses and reg properties." * V3HSK board with R-Car V3H (r8a77980) SoC - Initial board device tree Sergei Shtylov says "Add the initial device tree for the V3H Starter Kit board. The board has 1 debug serial port (SCIF0); include support for it, so that the serial console can work." - Enable PFC support and use for EtherAVB * V3MSK board with R-Car V3M (r8a77970) SoC - Add DU/LVDS/HDMI support Sergei Shtylyov says "Define the V3M Starter Kit board dependent part of the DU and LVDS device nodes. Also add the device nodes for Thine THC63LVD1024 LVDS decoder and Analog Devices ADV7511W HDMI transmitter..." - Enable PFC for EtherAVB * Condor board with R-Car V3H (r8a77980) SoC - Enable eMMC Sergei Shtylyov says "We're adding the R8A77980 MMC (SDHI) device nodes and then enable eMMC support on the Condor board." - Enable PFC support and use for EtherAVB and SCIF0 * Eagle board with R-Car V3M (r8a77970) SoC - Enable HDMI output * Eagle board with R-Car V3M (r8a77970) SoC and Condor board with R-Car V3H (r8a77980) SoC - Enable CAN-FD Adds the CAN-FD device nodes so the DT SoC files and enables single channel CAN-FD support in DT board files. ---------------------------------------------------------------- Geert Uytterhoeven (11): arm64: dts: renesas: draak: Rename EtherAVB "mdc" pin group to "mdio" arm64: dts: renesas: salvator-common: Rename EtherAVB "mdc" pin group to "mdio" arm64: dts: renesas: ulcb: Rename EtherAVB "mdc" pin group to "mdio" arm64: dts: renesas: r8a7795: Correct whitespace arm64: dts: renesas: r8a7796: Correct whitespace arm64: dts: renesas: r8a77965: Correct whitespace arm64: dts: renesas: ulcb: Add BD9571 PMIC arm64: dts: renesas: salvator-common: Add PMIC DDR Backup Power config arm64: dts: renesas: ulcb: Add PMIC DDR Backup Power config arm64: dts: renesas: r8a77970: Add secondary CA53 CPU core arm64: dts: renesas: r8a77970: Add Cortex-A53 PMU node Jacopo Mondi (2): arm64: dts: renesas: eagle: Enable HDMI output arm64: dts: renesas: r8a77995: Add VIN4 Kieran Bingham (7): arm64: dts: renesas: r8a77965: Add FCPF and FCPV instances arm64: dts: renesas: r8a77965: Add VSP instances arm64: dts: renesas: r8a77965: Populate the DU instance placeholder arm64: dts: renesas: r8a77965: Add HDMI encoder instance arm64: dts: renesas: r8a77965-salvator-x: Enable DU external clocks and HDMI arm64: dts: renesas: r8a77965-salvator-xs: Enable DU external clocks and HDMI arm64: dts: renesas: salvator-common: Add ADV7482 support Kuninori Morimoto (8): arm64: dts: renesas: r8a7795: add HDMI sound support arm64: dts: renesas: r8a7796: add HDMI sound support arm64: dts: renesas: salvator-common: use audio-graph-card for Sound arm64: dts: renesas: r8a7795-es1-salvator-x: enable HDMI sound arm64: dts: renesas: r8a7795-salvator-xs: enable HDMI sound arm64: dts: renesas: r8a7796-salvator-xs: enable HDMI sound arm64: dts: renesas: r8a7795-salvator-x: enable HDMI sound arm64: dts: renesas: r8a7796-salvator-x: enable HDMI sound Magnus Damm (5): arm64: dts: renesas: r8a77970: Update IPMMU DS1 bit number arm64: dts: renesas: r8a7795: Enable IPMMU devices arm64: dts: renesas: r8a7796: Enable IPMMU devices arm64: dts: renesas: r8a77970: Enable IPMMU devices arm64: dts: renesas: r8a77995: Enable IPMMU devices Niklas Söderlund (11): arm64: dts: renesas: r8a7795: decrease temperature hysteresis arm64: dts: renesas: r8a7796: decrease temperature hysteresis arm64: dts: renesas: r8a77965: use r8a77965-sysc binding definitions arm64: dts: renesas: r8a77965: Add R-Car Gen3 thermal support arm64: dts: renesas: r8a77965: add I2C support arm64: dts: renesas: r8a7795: add VIN and CSI-2 nodes arm64: dts: renesas: r8a7795-es1: add CSI-2 node arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes arm64: dts: renesas: salvator-common: enable VIN Sergei Shtylyov (21): arm64: dts: renesas: r8a77970: add FCPVD support arm64: dts: renesas: r8a77970: add VSPD support arm64: dts: renesas: r8a77970: add DU support arm64: dts: renesas: r8a77970: add LVDS support arm64: dts: renesas: eagle: add EtherAVB pins arm64: dts: renesas: v3msk: add EtherAVB pins arm64: dts: renesas: r8a77980: add PFC support arm64: dts: renesas: condor: add SCIF0 pins arm64: dts: renesas: condor: add EtherAVB pins arm64: dts: renesas: r8a77980: add MMC support arm64: dts: renesas: condor: add eMMC support arm64: dts: renesas: v3msk: add DU/LVDS/HDMI support arm64: dts: renesas: r8a77980: use CPG core clock macros arm64: dts: renesas: r8a77980: use SYSC power domain macros arm64: dts: renesas: r8a77970: add CAN-FD support arm64: dts: renesas: eagle: add CAN-FD support arm64: dts: renesas: r8a77980: add CAN-FD support arm64: dts: renesas: condor: add CAN-FD support arm64: dts: renesas: r8a77970: disable EtherAVB arm64: dts: renesas: r8a77980: disable EtherAVB arm64: dts: renesas: initial V3HSK board device tree Simon Horman (9): arm64: dts: renesas: r8a7796: sort subnodes of the root node arm64: dts: renesas: r8a7796: sort subnodes of the soc node arm64: dts: renesas: r8a7795: sort subnodes of the root node arm64: dts: renesas: r8a7795: sort subnodes of the soc node arm64: dts: renesas: r8a7795-es1: Enable IPMMU devices arm64: dts: renesas: r8a7795: Add address properties to rcar_sound port nodes arm64: dts: renesas: r8a7796: Add address properties to rcar_sound port nodes arm64: dts: renesas: r8a77965: Add address properties to rcar_sound port nodes arm64: dts: renesas: r8a77980: add resets property to CAN-FD node Takeshi Kihara (3): arm64: dts: renesas: r8a77965: Add all MSIOF device nodes arm64: dts: renesas: Add Renesas Ebisu board support arm64: dts: renesas: r8a77965: Add SDHI device nodes Wolfram Sang (1): arm64: dts: renesas: salvator-common: add eeprom Yoshihiro Kaneko (5): arm64: dts: renesas: r8a77995: sort subnodes of the root node arm64: dts: renesas: r8a77995: sort subnodes of the soc node arm64: dts: renesas: r8a77965: sort subnodes of the root node arm64: dts: renesas: r8a77965: sort subnodes of the soc node arm64: dts: renesas: r8a77970: sort subnodes of the soc node Yoshihiro Shimoda (19): arm64: dts: renesas: r8a77965: add usb2_phy nodes arm64: dts: renesas: r8a77965: add usb3_phy node arm64: dts: renesas: r8a77965: add USB 2.0 host nodes arm64: dts: renesas: r8a77965: add usb_dmac nodes arm64: dts: renesas: r8a77965: add HS-USB node arm64: dts: renesas: r8a77965: add USB 3.0 host node arm64: dts: renesas: r8a77965: add USB 3.0 peripheral node arm64: dts: renesas: r8a77965: Add PWM device nodes arm64: dts: renesas: Add Renesas R8A77990 Kconfig support arm64: dts: renesas: Add Renesas R8A77990 SoC support arm64: dts: renesas: r8a77990: Revise the psci node arm64: dts: renesas: r8a77990: Revise the cache controller node arm64: dts: renesas: r8a7795: salvator-xs: enable usb2_phy3 node arm64: dts: renesas: r8a7795: salvator-xs: enable hsusb channel 3 node arm64: dts: renesas: r8a7795: salvator-xs: enable USB2.0 host channel 3 arm64: dts: renesas: r8a77990: Add PFC device node arm64: dts: renesas: r8a77990: Add GPIO device nodes arm64: dts: renesas: r8a77990: Add EthernetAVB device nodes arm64: dts: renesas: r8a77990: ebisu: Enable EthernetAVB arch/arm64/Kconfig.platforms | 6 + arch/arm64/boot/dts/renesas/Makefile | 3 +- .../boot/dts/renesas/r8a7795-es1-salvator-x.dts | 46 + arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi | 144 +- arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 46 + .../arm64/boot/dts/renesas/r8a7795-salvator-xs.dts | 85 + arch/arm64/boot/dts/renesas/r8a7795.dtsi | 2499 +++++++++++--------- arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 28 + .../arm64/boot/dts/renesas/r8a7796-salvator-xs.dts | 28 + arch/arm64/boot/dts/renesas/r8a7796.dtsi | 2395 +++++++++++-------- .../arm64/boot/dts/renesas/r8a77965-salvator-x.dts | 28 + .../boot/dts/renesas/r8a77965-salvator-xs.dts | 28 + arch/arm64/boot/dts/renesas/r8a77965.dtsi | 1601 +++++++++---- arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 116 + arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts | 137 ++ arch/arm64/boot/dts/renesas/r8a77970.dtsi | 661 ++++-- arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 81 + arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts | 60 + arch/arm64/boot/dts/renesas/r8a77980.dtsi | 99 +- arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 65 + arch/arm64/boot/dts/renesas/r8a77990.dtsi | 281 +++ arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 2 +- arch/arm64/boot/dts/renesas/r8a77995.dtsi | 730 +++--- arch/arm64/boot/dts/renesas/salvator-common.dtsi | 187 +- arch/arm64/boot/dts/renesas/ulcb.dtsi | 37 +- 25 files changed, 6324 insertions(+), 3069 deletions(-) create mode 100644 arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a77990.dtsi