From patchwork Fri Aug 30 03:40:44 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Billy Tsai X-Patchwork-Id: 1978690 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.ozlabs.org (client-ip=112.213.38.117; helo=lists.ozlabs.org; envelope-from=linux-aspeed-bounces+incoming=patchwork.ozlabs.org@lists.ozlabs.org; receiver=patchwork.ozlabs.org) Received: from lists.ozlabs.org (lists.ozlabs.org [112.213.38.117]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (secp384r1)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4Ww3q84Vf0z1yfn for ; Fri, 30 Aug 2024 13:41:40 +1000 (AEST) Received: from boromir.ozlabs.org (localhost [IPv6:::1]) by lists.ozlabs.org (Postfix) with ESMTP id 4Ww3q83Yhrz30CM for ; Fri, 30 Aug 2024 13:41:40 +1000 (AEST) X-Original-To: linux-aspeed@lists.ozlabs.org Delivered-To: linux-aspeed@lists.ozlabs.org Authentication-Results: lists.ozlabs.org; arc=none smtp.remote-ip=211.20.114.72 ARC-Seal: i=1; a=rsa-sha256; d=lists.ozlabs.org; s=201707; t=1724989291; cv=none; b=ITJ6jWgZ7uJSOUHHbEOlo4FK1VirI8sCbDhGofT0RN2bxbvmkmZnzKVFT9IbWoZyKGaktP3Rx5sASHcxq1UF9pgvA+7MrZ5bs21wTFY7QMtnDTrNh0B5DAuu24qQOFWYGpPGUO5OIoVbpaMkbkyYwOxamvQg4Lc/OuDneewpXhz0wqMgNK/z6UrlcaLofFGaMk6IId0Ws+/pxPM+ZX2tyyu+PE80QluaLs0VHY62D9v7e2Ow3soKQDnvenvzxCQWgW1z1MP+Ep+F6xz2z5ym41OsKcRr6HAjt5PkHG8ZcL0xn1AGEGEtTXF4aBDABChiLQT38sE4L61XMNFkedGuTQ== ARC-Message-Signature: i=1; a=rsa-sha256; d=lists.ozlabs.org; s=201707; t=1724989291; c=relaxed/relaxed; bh=3bsBwqMGpIr6QM0PWM/ItHgl4/YFfBbvN59COWgMOxA=; h=Received:Received:From:To:Subject:Date:Message-ID:X-Mailer: In-Reply-To:References:MIME-Version:Content-Transfer-Encoding: Content-Type; b=fq3qFdtyqT18IyfkBVHllZPkjLkfWGYOvul1hbK7apPbUVNI277N1hhUbtw9CimrTyunbk1p/y/l7Rls3JgPEIsFPoKmPtx3MZ7d6r6hFFXC1enBflwZEX1odf15M4SrZX34V+Ojp3iKBzFeEo0AH1pAic+Om7vfApOb5LjzZkspLpH6wUVMAe253i4G4AmY/NT/38VA2Y/+cjzTSkZtDkTnpbAASU7D8JETglaFz4Z3BZDkwq36oZ97jHnDqXTiS5nJfHUsoyxIS5Ln1LZWHJgbVQVCUbFAvrr4Vyg+mWWzsLOL5rWuNhtSWxJ9epkS+FhkeTQabDgusHGEQd2edg== ARC-Authentication-Results: i=1; lists.ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=aspeedtech.com; spf=pass (client-ip=211.20.114.72; helo=twmbx01.aspeed.com; envelope-from=billy_tsai@aspeedtech.com; receiver=lists.ozlabs.org) smtp.mailfrom=aspeedtech.com Authentication-Results: lists.ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=aspeedtech.com Authentication-Results: lists.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=aspeedtech.com (client-ip=211.20.114.72; helo=twmbx01.aspeed.com; envelope-from=billy_tsai@aspeedtech.com; receiver=lists.ozlabs.org) Received: from TWMBX01.aspeed.com (mail.aspeedtech.com [211.20.114.72]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by lists.ozlabs.org (Postfix) with ESMTPS id 4Ww3pt4TbCz2ypx for ; Fri, 30 Aug 2024 13:41:23 +1000 (AEST) Received: from TWMBX01.aspeed.com (192.168.0.62) by TWMBX01.aspeed.com (192.168.0.62) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1258.12; Fri, 30 Aug 2024 11:40:47 +0800 Received: from mail.aspeedtech.com (192.168.10.10) by TWMBX01.aspeed.com (192.168.0.62) with Microsoft SMTP Server id 15.2.1258.12 via Frontend Transport; Fri, 30 Aug 2024 11:40:47 +0800 From: Billy Tsai To: , , , , , , , , , , , , Subject: [PATCH v2 1/4] dt-bindings: gpio: aspeed,ast2400-gpio: Support ast2700 Date: Fri, 30 Aug 2024 11:40:44 +0800 Message-ID: <20240830034047.2251482-2-billy_tsai@aspeedtech.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20240830034047.2251482-1-billy_tsai@aspeedtech.com> References: <20240830034047.2251482-1-billy_tsai@aspeedtech.com> MIME-Version: 1.0 X-BeenThere: linux-aspeed@lists.ozlabs.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Linux ASPEED SoC development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: linux-aspeed-bounces+incoming=patchwork.ozlabs.org@lists.ozlabs.org Sender: "Linux-aspeed" The AST2700 is the 7th generation SoC from Aspeed, featuring two GPIO controllers: one with 12 GPIO pins and another with 216 GPIO pins. Signed-off-by: Billy Tsai --- .../bindings/gpio/aspeed,ast2400-gpio.yaml | 46 ++++++++++++++++++- 1 file changed, 45 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml index cf11aa7ec8c7..4d439972c14b 100644 --- a/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml @@ -15,6 +15,7 @@ properties: - aspeed,ast2400-gpio - aspeed,ast2500-gpio - aspeed,ast2600-gpio + - aspeed,ast2700-gpio reg: maxItems: 1 @@ -42,7 +43,7 @@ properties: const: 2 ngpios: - minimum: 36 + minimum: 12 maximum: 232 required: @@ -93,6 +94,20 @@ allOf: enum: [ 36, 208 ] required: - ngpios + - if: + properties: + compatible: + contains: + const: aspeed,ast2700-gpio + then: + properties: + gpio-line-names: + minItems: 12 + maxItems: 216 + ngpios: + enum: [ 12, 216 ] + required: + - ngpios additionalProperties: false @@ -146,3 +161,32 @@ examples: gpio-ranges = <&pinctrl 0 208 36>; ngpios = <36>; }; + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + #include + gpio2: gpio@14c0b000 { + compatible = "aspeed,ast2700-gpio"; + reg = <0x0 0x14c0b000 0x0 0x1000>; + interrupts-extended = <&soc1_intc2 18>; + interrupt-controller; + #interrupt-cells = <2>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pinctrl1 0 0 216>; + ngpios = <216>; + }; + + gpio3: gpio@12c11000 { + compatible = "aspeed,ast2700-gpio"; + reg = <0x0 0x12c11000 0x0 0x1000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pinctrl0 0 0 12>; + ngpios = <12>; + }; + }; From patchwork Fri Aug 30 03:40:45 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Billy Tsai X-Patchwork-Id: 1978691 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.ozlabs.org (client-ip=112.213.38.117; helo=lists.ozlabs.org; envelope-from=linux-aspeed-bounces+incoming=patchwork.ozlabs.org@lists.ozlabs.org; receiver=patchwork.ozlabs.org) Received: from lists.ozlabs.org (lists.ozlabs.org [112.213.38.117]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (secp384r1)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4Ww3qB0XvLz1yfn for ; Fri, 30 Aug 2024 13:41:42 +1000 (AEST) Received: from boromir.ozlabs.org (localhost [IPv6:::1]) by lists.ozlabs.org (Postfix) with ESMTP id 4Ww3q94vz8z30Nl for ; Fri, 30 Aug 2024 13:41:41 +1000 (AEST) X-Original-To: linux-aspeed@lists.ozlabs.org Delivered-To: linux-aspeed@lists.ozlabs.org Authentication-Results: lists.ozlabs.org; arc=none smtp.remote-ip=211.20.114.72 ARC-Seal: i=1; a=rsa-sha256; d=lists.ozlabs.org; s=201707; t=1724989297; cv=none; b=UPItv/KiWu7OypvX2Kk05JN/DhYqHkjnCZl4VA9q6ibvDG8Z/KY7wtsspeGSbDXUaxkTcNZb1eJe47AMMEpz9At1ZFcchnIB0yQWQyobkKMo8n9bxUKppCPaH72Us6rKvWAscDnfxumqPWWl44jidJsRgl+Rb8Gyp3eEpONaM3tb2NkUm9W5byVkfqSIHyyYZuarupLeRWK8l6BMcyZDqRL9vSSftL2p+PPFXchkaH9O2Qor5tyG8sLoF9+n1vLPR/vlQ4VbDhVRHmwx8yKKSFZ1Oc5kN+ySQ5YznE6wQ+J7WjeZlAYigpbHKfgsIE6P+s0VkK/Wt5ABH1xSZd+PdQ== ARC-Message-Signature: i=1; a=rsa-sha256; d=lists.ozlabs.org; s=201707; t=1724989297; c=relaxed/relaxed; bh=LH9WbMjawy0yt9uzCsAlIMobir8FT1f0mICVqyZ918g=; h=Received:Received:From:To:Subject:Date:Message-ID:X-Mailer: In-Reply-To:References:MIME-Version:Content-Transfer-Encoding: Content-Type; b=UoFMrAMeTYtIjylLc89rLWqT7b6819zglHBW0AGclO58SLqwfCM2Npnk1a4ANvnRqdEdrlYw/G0ukHWkH7C2OHxU98GAtvWKmJOV4PRYOly3bkQmcaPE6oZ5T4LKjURq+usLfDPac5hQtZBVdl9oOrlHDZ6XWQCl2rKAB1NbOXKDoNSYEDCZygaN5FbLnhnBkZDeN7PldupblxK73OZiApRwvJu1QgKZgw0/6BHMb9FFvlDhJmNGPowJB6woH6ANu/KVHE8l/0/ZWm7wpIQC9BQN2dx4ER5jV4QZ0FMF08yOTeXclMDNuCo3pFAKYOHTIyHQRL8k/VhiGWw4JFIgwg== ARC-Authentication-Results: i=1; lists.ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=aspeedtech.com; spf=pass (client-ip=211.20.114.72; helo=twmbx01.aspeed.com; envelope-from=billy_tsai@aspeedtech.com; receiver=lists.ozlabs.org) smtp.mailfrom=aspeedtech.com Authentication-Results: lists.ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=aspeedtech.com Authentication-Results: lists.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=aspeedtech.com (client-ip=211.20.114.72; helo=twmbx01.aspeed.com; envelope-from=billy_tsai@aspeedtech.com; receiver=lists.ozlabs.org) Received: from TWMBX01.aspeed.com (mail.aspeedtech.com [211.20.114.72]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by lists.ozlabs.org (Postfix) with ESMTPS id 4Ww3q44Hp0z2yvw for ; Fri, 30 Aug 2024 13:41:36 +1000 (AEST) Received: from TWMBX01.aspeed.com (192.168.0.62) by TWMBX01.aspeed.com (192.168.0.62) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1258.12; Fri, 30 Aug 2024 11:40:48 +0800 Received: from mail.aspeedtech.com (192.168.10.10) by TWMBX01.aspeed.com (192.168.0.62) with Microsoft SMTP Server id 15.2.1258.12 via Frontend Transport; Fri, 30 Aug 2024 11:40:48 +0800 From: Billy Tsai To: , , , , , , , , , , , , Subject: [PATCH v2 2/4] gpio: aspeed: Remove the name for bank array Date: Fri, 30 Aug 2024 11:40:45 +0800 Message-ID: <20240830034047.2251482-3-billy_tsai@aspeedtech.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20240830034047.2251482-1-billy_tsai@aspeedtech.com> References: <20240830034047.2251482-1-billy_tsai@aspeedtech.com> MIME-Version: 1.0 X-BeenThere: linux-aspeed@lists.ozlabs.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Linux ASPEED SoC development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: linux-aspeed-bounces+incoming=patchwork.ozlabs.org@lists.ozlabs.org Sender: "Linux-aspeed" The bank array name is only used to determine if the GPIO offset is valid, and this condition can be replaced by checking if the offset exceeds the ngpio property. Signed-off-by: Billy Tsai --- drivers/gpio/gpio-aspeed.c | 17 ++++------------- 1 file changed, 4 insertions(+), 13 deletions(-) diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c index 04c03402db6d..24f50a0ea4ab 100644 --- a/drivers/gpio/gpio-aspeed.c +++ b/drivers/gpio/gpio-aspeed.c @@ -77,7 +77,6 @@ struct aspeed_gpio_bank { uint16_t debounce_regs; uint16_t tolerance_regs; uint16_t cmdsrc_regs; - const char names[4][3]; }; /* @@ -104,7 +103,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { .debounce_regs = 0x0040, .tolerance_regs = 0x001c, .cmdsrc_regs = 0x0060, - .names = { "A", "B", "C", "D" }, }, { .val_regs = 0x0020, @@ -113,7 +111,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { .debounce_regs = 0x0048, .tolerance_regs = 0x003c, .cmdsrc_regs = 0x0068, - .names = { "E", "F", "G", "H" }, }, { .val_regs = 0x0070, @@ -122,7 +119,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { .debounce_regs = 0x00b0, .tolerance_regs = 0x00ac, .cmdsrc_regs = 0x0090, - .names = { "I", "J", "K", "L" }, }, { .val_regs = 0x0078, @@ -131,7 +127,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { .debounce_regs = 0x0100, .tolerance_regs = 0x00fc, .cmdsrc_regs = 0x00e0, - .names = { "M", "N", "O", "P" }, }, { .val_regs = 0x0080, @@ -140,7 +135,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { .debounce_regs = 0x0130, .tolerance_regs = 0x012c, .cmdsrc_regs = 0x0110, - .names = { "Q", "R", "S", "T" }, }, { .val_regs = 0x0088, @@ -149,7 +143,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { .debounce_regs = 0x0160, .tolerance_regs = 0x015c, .cmdsrc_regs = 0x0140, - .names = { "U", "V", "W", "X" }, }, { .val_regs = 0x01E0, @@ -158,7 +151,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { .debounce_regs = 0x0190, .tolerance_regs = 0x018c, .cmdsrc_regs = 0x0170, - .names = { "Y", "Z", "AA", "AB" }, }, { .val_regs = 0x01e8, @@ -167,7 +159,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { .debounce_regs = 0x01c0, .tolerance_regs = 0x01bc, .cmdsrc_regs = 0x01a0, - .names = { "AC", "", "", "" }, }, }; @@ -280,11 +271,11 @@ static inline const struct aspeed_bank_props *find_bank_props( static inline bool have_gpio(struct aspeed_gpio *gpio, unsigned int offset) { const struct aspeed_bank_props *props = find_bank_props(gpio, offset); - const struct aspeed_gpio_bank *bank = to_bank(offset); - unsigned int group = GPIO_OFFSET(offset) / 8; - return bank->names[group][0] != '\0' && - (!props || ((props->input | props->output) & GPIO_BIT(offset))); + if (offset > gpio->chip.ngpio) + return false; + + return (!props || ((props->input | props->output) & GPIO_BIT(offset))); } static inline bool have_input(struct aspeed_gpio *gpio, unsigned int offset) From patchwork Fri Aug 30 03:40:46 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Billy Tsai X-Patchwork-Id: 1978692 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.ozlabs.org (client-ip=112.213.38.117; helo=lists.ozlabs.org; envelope-from=linux-aspeed-bounces+incoming=patchwork.ozlabs.org@lists.ozlabs.org; receiver=patchwork.ozlabs.org) Received: from lists.ozlabs.org (lists.ozlabs.org [112.213.38.117]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (secp384r1)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4Ww3qB3kNyz1ygJ for ; Fri, 30 Aug 2024 13:41:42 +1000 (AEST) Received: from boromir.ozlabs.org (localhost [IPv6:::1]) by lists.ozlabs.org (Postfix) with ESMTP id 4Ww3q96VhGz30TT for ; Fri, 30 Aug 2024 13:41:41 +1000 (AEST) X-Original-To: linux-aspeed@lists.ozlabs.org Delivered-To: linux-aspeed@lists.ozlabs.org Authentication-Results: lists.ozlabs.org; arc=none smtp.remote-ip=211.20.114.72 ARC-Seal: i=1; a=rsa-sha256; d=lists.ozlabs.org; s=201707; t=1724989297; cv=none; b=iSSvkUTtEoZ/T2EAJvN1jWK43CMVR7egAYlNyHLiwZzziRG4rTTbnrvamKH0H2I5gJlD9zNZBXiDXDGDIcOnNS2lF6G3nRk5tFCVq7JOTGvmtQyhlYl7dZDaJbLXcmJbk6sFYFS69UqI2KAon8LcRk19BSdd1pBKqJPjaP1FJFMOnntRtDhwBKZu06oZFKo3MKZYNKjfoxgax9cmZd8iiZhNgy3eJAvHjKTj16Nmgvplycm9do1FNTSWRVeKU+Rn5eN96DATYG5Chia57xur1ICKxMrIACGHm5xZfj72kbVQQCmO8UAZ7X/Nvjkb0hzUP9F+kRHwHLdfo8OnsTFarQ== ARC-Message-Signature: i=1; a=rsa-sha256; d=lists.ozlabs.org; s=201707; t=1724989297; c=relaxed/relaxed; bh=mwCMM4bu39s+gi2eQ24XPIwdv8JFnQ7vdprB0Bh1298=; h=Received:Received:From:To:Subject:Date:Message-ID:X-Mailer: In-Reply-To:References:MIME-Version:Content-Transfer-Encoding: Content-Type; b=ATNKOZl2JPNWXnL5NgZhWhhgprrrFYU+Z/hGo0DLAive8kDNoYk+r5kevVKF5ia2weiUtNAAoyDCFs/ZmrOyScqzZKFH9s+hi7O58DetZF2LyNDC8dPHcfAxlZlkix1rOfdXQE1BgIgjH1uQSa3zCadjk+d5YEzphYU+kY/Z1ht8pUpWBDBNbmFPdh5qhAm2iwOq/5SSOFrF+47XZ+WADPrXguQWLktdgydKa92Cz09zZZxgtgYySI3GHyVU1Qq88Bz+bxbva0bdPMhl3L+R/NMFKhtIF9SPeACHjQ49L1tJ7Bh4KqkHAJPpZ2ogPNw31eWsMUpqBL8aL0ZjcOhxbA== ARC-Authentication-Results: i=1; lists.ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=aspeedtech.com; spf=pass (client-ip=211.20.114.72; helo=twmbx01.aspeed.com; envelope-from=billy_tsai@aspeedtech.com; receiver=lists.ozlabs.org) smtp.mailfrom=aspeedtech.com Authentication-Results: lists.ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=aspeedtech.com Authentication-Results: lists.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=aspeedtech.com (client-ip=211.20.114.72; helo=twmbx01.aspeed.com; envelope-from=billy_tsai@aspeedtech.com; receiver=lists.ozlabs.org) Received: from TWMBX01.aspeed.com (mail.aspeedtech.com [211.20.114.72]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by lists.ozlabs.org (Postfix) with ESMTPS id 4Ww3q51VG5z2yvw for ; Fri, 30 Aug 2024 13:41:37 +1000 (AEST) Received: from TWMBX01.aspeed.com (192.168.0.62) by TWMBX01.aspeed.com (192.168.0.62) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1258.12; Fri, 30 Aug 2024 11:40:48 +0800 Received: from mail.aspeedtech.com (192.168.10.10) by TWMBX01.aspeed.com (192.168.0.62) with Microsoft SMTP Server id 15.2.1258.12 via Frontend Transport; Fri, 30 Aug 2024 11:40:48 +0800 From: Billy Tsai To: , , , , , , , , , , , , Subject: [PATCH v2 3/4] gpio: aspeed: Create llops to handle hardware access Date: Fri, 30 Aug 2024 11:40:46 +0800 Message-ID: <20240830034047.2251482-4-billy_tsai@aspeedtech.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20240830034047.2251482-1-billy_tsai@aspeedtech.com> References: <20240830034047.2251482-1-billy_tsai@aspeedtech.com> MIME-Version: 1.0 X-BeenThere: linux-aspeed@lists.ozlabs.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Linux ASPEED SoC development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: linux-aspeed-bounces+incoming=patchwork.ozlabs.org@lists.ozlabs.org Sender: "Linux-aspeed" Add low-level operations (llops) to abstract the register access for GPIO registers and the coprocessor request/release. With this abstraction layer, the driver can separate the hardware and software logic, making it easier to extend the driver to support different hardware register layouts. Signed-off-by: Billy Tsai --- drivers/gpio/gpio-aspeed.c | 309 +++++++++++++++++-------------------- 1 file changed, 138 insertions(+), 171 deletions(-) diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c index 24f50a0ea4ab..74c4e80958bf 100644 --- a/drivers/gpio/gpio-aspeed.c +++ b/drivers/gpio/gpio-aspeed.c @@ -39,6 +39,7 @@ struct aspeed_bank_props { struct aspeed_gpio_config { unsigned int nr_gpios; const struct aspeed_bank_props *props; + unsigned int version; }; /* @@ -62,10 +63,13 @@ struct aspeed_gpio { u8 *offset_timer; unsigned int timer_users[4]; + const int *debounce_timers_array; + int debounce_timers_num; struct clk *clk; u32 *dcache; u8 *cf_copro_bankmap; + const struct aspeed_gpio_llops *llops; }; struct aspeed_gpio_bank { @@ -178,6 +182,15 @@ enum aspeed_gpio_reg { reg_cmdsrc1, }; +struct aspeed_gpio_llops { + bool (*copro_request)(struct aspeed_gpio *gpio, unsigned int offset); + void (*copro_release)(struct aspeed_gpio *gpio, unsigned int offset); + void (*reg_bits_set)(struct aspeed_gpio *gpio, unsigned int offset, + const enum aspeed_gpio_reg reg, u32 val); + u32 (*reg_bits_read)(struct aspeed_gpio *gpio, unsigned int offset, + const enum aspeed_gpio_reg reg); +}; + #define GPIO_VAL_VALUE 0x00 #define GPIO_VAL_DIR 0x04 @@ -237,10 +250,6 @@ static inline void __iomem *bank_reg(struct aspeed_gpio *gpio, #define GPIO_OFFSET(x) ((x) & 0x1f) #define GPIO_BIT(x) BIT(GPIO_OFFSET(x)) -#define _GPIO_SET_DEBOUNCE(t, o, i) ((!!((t) & BIT(i))) << GPIO_OFFSET(o)) -#define GPIO_SET_DEBOUNCE1(t, o) _GPIO_SET_DEBOUNCE(t, o, 1) -#define GPIO_SET_DEBOUNCE2(t, o) _GPIO_SET_DEBOUNCE(t, o, 0) - static const struct aspeed_gpio_bank *to_bank(unsigned int offset) { unsigned int bank = GPIO_BANK(offset); @@ -296,35 +305,17 @@ static inline bool have_output(struct aspeed_gpio *gpio, unsigned int offset) } static void aspeed_gpio_change_cmd_source(struct aspeed_gpio *gpio, - const struct aspeed_gpio_bank *bank, - int bindex, int cmdsrc) + unsigned int offset, + int cmdsrc) { - void __iomem *c0 = bank_reg(gpio, bank, reg_cmdsrc0); - void __iomem *c1 = bank_reg(gpio, bank, reg_cmdsrc1); - u32 bit, reg; - /* - * Each register controls 4 banks, so take the bottom 2 - * bits of the bank index, and use them to select the - * right control bit (0, 8, 16 or 24). + * The command source register is only valid in bits 0, 8, 16, and 24, so we use + * (offset & ~(0x7)) to ensure that reg_bits_set always targets a valid bit. */ - bit = BIT((bindex & 3) << 3); - /* Source 1 first to avoid illegal 11 combination */ - reg = ioread32(c1); - if (cmdsrc & 2) - reg |= bit; - else - reg &= ~bit; - iowrite32(reg, c1); - + gpio->llops->reg_bits_set(gpio, offset & ~(0x7), reg_cmdsrc1, !!(cmdsrc & BIT(1))); /* Then Source 0 */ - reg = ioread32(c0); - if (cmdsrc & 1) - reg |= bit; - else - reg &= ~bit; - iowrite32(reg, c0); + gpio->llops->reg_bits_set(gpio, offset & ~(0x7), reg_cmdsrc0, !!(cmdsrc & BIT(0))); } static bool aspeed_gpio_copro_request(struct aspeed_gpio *gpio, @@ -343,7 +334,7 @@ static bool aspeed_gpio_copro_request(struct aspeed_gpio *gpio, copro_ops->request_access(copro_data); /* Change command source back to ARM */ - aspeed_gpio_change_cmd_source(gpio, bank, offset >> 3, GPIO_CMDSRC_ARM); + aspeed_gpio_change_cmd_source(gpio, offset, GPIO_CMDSRC_ARM); /* Update cache */ gpio->dcache[GPIO_BANK(offset)] = ioread32(bank_reg(gpio, bank, reg_rdata)); @@ -354,8 +345,6 @@ static bool aspeed_gpio_copro_request(struct aspeed_gpio *gpio, static void aspeed_gpio_copro_release(struct aspeed_gpio *gpio, unsigned int offset) { - const struct aspeed_gpio_bank *bank = to_bank(offset); - if (!copro_ops || !gpio->cf_copro_bankmap) return; if (!gpio->cf_copro_bankmap[offset >> 3]) @@ -364,7 +353,7 @@ static void aspeed_gpio_copro_release(struct aspeed_gpio *gpio, return; /* Change command source back to ColdFire */ - aspeed_gpio_change_cmd_source(gpio, bank, offset >> 3, + aspeed_gpio_change_cmd_source(gpio, offset, GPIO_CMDSRC_COLDFIRE); /* Restart the coprocessor */ @@ -374,29 +363,24 @@ static void aspeed_gpio_copro_release(struct aspeed_gpio *gpio, static int aspeed_gpio_get(struct gpio_chip *gc, unsigned int offset) { struct aspeed_gpio *gpio = gpiochip_get_data(gc); - const struct aspeed_gpio_bank *bank = to_bank(offset); - return !!(ioread32(bank_reg(gpio, bank, reg_val)) & GPIO_BIT(offset)); + return gpio->llops->reg_bits_read(gpio, offset, reg_val); } static void __aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset, int val) { struct aspeed_gpio *gpio = gpiochip_get_data(gc); - const struct aspeed_gpio_bank *bank = to_bank(offset); - void __iomem *addr; u32 reg; - addr = bank_reg(gpio, bank, reg_val); reg = gpio->dcache[GPIO_BANK(offset)]; - if (val) reg |= GPIO_BIT(offset); else reg &= ~GPIO_BIT(offset); gpio->dcache[GPIO_BANK(offset)] = reg; - iowrite32(reg, addr); + gpio->llops->reg_bits_set(gpio, offset, reg_val, val); } static void aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset, @@ -407,36 +391,32 @@ static void aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset, bool copro; raw_spin_lock_irqsave(&gpio->lock, flags); - copro = aspeed_gpio_copro_request(gpio, offset); + if (gpio->llops->copro_request) + copro = gpio->llops->copro_request(gpio, offset); __aspeed_gpio_set(gc, offset, val); - if (copro) - aspeed_gpio_copro_release(gpio, offset); + if (copro && gpio->llops->copro_release) + gpio->llops->copro_release(gpio, offset); raw_spin_unlock_irqrestore(&gpio->lock, flags); } static int aspeed_gpio_dir_in(struct gpio_chip *gc, unsigned int offset) { struct aspeed_gpio *gpio = gpiochip_get_data(gc); - const struct aspeed_gpio_bank *bank = to_bank(offset); - void __iomem *addr = bank_reg(gpio, bank, reg_dir); unsigned long flags; bool copro; - u32 reg; if (!have_input(gpio, offset)) return -ENOTSUPP; raw_spin_lock_irqsave(&gpio->lock, flags); - reg = ioread32(addr); - reg &= ~GPIO_BIT(offset); - - copro = aspeed_gpio_copro_request(gpio, offset); - iowrite32(reg, addr); - if (copro) - aspeed_gpio_copro_release(gpio, offset); + if (gpio->llops->copro_request) + copro = gpio->llops->copro_request(gpio, offset); + gpio->llops->reg_bits_set(gpio, offset, reg_dir, 0); + if (copro && gpio->llops->copro_release) + gpio->llops->copro_release(gpio, offset); raw_spin_unlock_irqrestore(&gpio->lock, flags); @@ -447,26 +427,21 @@ static int aspeed_gpio_dir_out(struct gpio_chip *gc, unsigned int offset, int val) { struct aspeed_gpio *gpio = gpiochip_get_data(gc); - const struct aspeed_gpio_bank *bank = to_bank(offset); - void __iomem *addr = bank_reg(gpio, bank, reg_dir); unsigned long flags; bool copro; - u32 reg; if (!have_output(gpio, offset)) return -ENOTSUPP; raw_spin_lock_irqsave(&gpio->lock, flags); - reg = ioread32(addr); - reg |= GPIO_BIT(offset); - - copro = aspeed_gpio_copro_request(gpio, offset); + if (gpio->llops->copro_request) + copro = gpio->llops->copro_request(gpio, offset); __aspeed_gpio_set(gc, offset, val); - iowrite32(reg, addr); + gpio->llops->reg_bits_set(gpio, offset, reg_dir, 1); - if (copro) - aspeed_gpio_copro_release(gpio, offset); + if (copro && gpio->llops->copro_release) + gpio->llops->copro_release(gpio, offset); raw_spin_unlock_irqrestore(&gpio->lock, flags); return 0; @@ -475,7 +450,6 @@ static int aspeed_gpio_dir_out(struct gpio_chip *gc, static int aspeed_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) { struct aspeed_gpio *gpio = gpiochip_get_data(gc); - const struct aspeed_gpio_bank *bank = to_bank(offset); unsigned long flags; u32 val; @@ -487,7 +461,7 @@ static int aspeed_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) raw_spin_lock_irqsave(&gpio->lock, flags); - val = ioread32(bank_reg(gpio, bank, reg_dir)) & GPIO_BIT(offset); + val = gpio->llops->reg_bits_read(gpio, offset, reg_dir); raw_spin_unlock_irqrestore(&gpio->lock, flags); @@ -496,8 +470,7 @@ static int aspeed_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) static inline int irqd_to_aspeed_gpio_data(struct irq_data *d, struct aspeed_gpio **gpio, - const struct aspeed_gpio_bank **bank, - u32 *bit, int *offset) + int *offset) { struct aspeed_gpio *internal; @@ -510,70 +483,55 @@ static inline int irqd_to_aspeed_gpio_data(struct irq_data *d, return -ENOTSUPP; *gpio = internal; - *bank = to_bank(*offset); - *bit = GPIO_BIT(*offset); return 0; } static void aspeed_gpio_irq_ack(struct irq_data *d) { - const struct aspeed_gpio_bank *bank; struct aspeed_gpio *gpio; unsigned long flags; - void __iomem *status_addr; int rc, offset; bool copro; - u32 bit; - rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit, &offset); + rc = irqd_to_aspeed_gpio_data(d, &gpio, &offset); if (rc) return; - status_addr = bank_reg(gpio, bank, reg_irq_status); - raw_spin_lock_irqsave(&gpio->lock, flags); - copro = aspeed_gpio_copro_request(gpio, offset); + if (gpio->llops->copro_request) + copro = gpio->llops->copro_request(gpio, offset); - iowrite32(bit, status_addr); + gpio->llops->reg_bits_set(gpio, offset, reg_irq_status, 1); - if (copro) - aspeed_gpio_copro_release(gpio, offset); + if (copro && gpio->llops->copro_release) + gpio->llops->copro_release(gpio, offset); raw_spin_unlock_irqrestore(&gpio->lock, flags); } static void aspeed_gpio_irq_set_mask(struct irq_data *d, bool set) { - const struct aspeed_gpio_bank *bank; struct aspeed_gpio *gpio; unsigned long flags; - u32 reg, bit; - void __iomem *addr; int rc, offset; bool copro; - rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit, &offset); + rc = irqd_to_aspeed_gpio_data(d, &gpio, &offset); if (rc) return; - addr = bank_reg(gpio, bank, reg_irq_enable); - /* Unmasking the IRQ */ if (set) gpiochip_enable_irq(&gpio->chip, irqd_to_hwirq(d)); raw_spin_lock_irqsave(&gpio->lock, flags); - copro = aspeed_gpio_copro_request(gpio, offset); + if (gpio->llops->copro_request) + copro = gpio->llops->copro_request(gpio, offset); - reg = ioread32(addr); - if (set) - reg |= bit; - else - reg &= ~bit; - iowrite32(reg, addr); + gpio->llops->reg_bits_set(gpio, offset, reg_irq_enable, set); - if (copro) - aspeed_gpio_copro_release(gpio, offset); + if (copro && gpio->llops->copro_release) + gpio->llops->copro_release(gpio, offset); raw_spin_unlock_irqrestore(&gpio->lock, flags); /* Masking the IRQ */ @@ -596,34 +554,31 @@ static int aspeed_gpio_set_type(struct irq_data *d, unsigned int type) u32 type0 = 0; u32 type1 = 0; u32 type2 = 0; - u32 bit, reg; - const struct aspeed_gpio_bank *bank; irq_flow_handler_t handler; struct aspeed_gpio *gpio; unsigned long flags; - void __iomem *addr; int rc, offset; bool copro; - rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit, &offset); + rc = irqd_to_aspeed_gpio_data(d, &gpio, &offset); if (rc) return -EINVAL; switch (type & IRQ_TYPE_SENSE_MASK) { case IRQ_TYPE_EDGE_BOTH: - type2 |= bit; + type2 = 1; fallthrough; case IRQ_TYPE_EDGE_RISING: - type0 |= bit; + type0 = 1; fallthrough; case IRQ_TYPE_EDGE_FALLING: handler = handle_edge_irq; break; case IRQ_TYPE_LEVEL_HIGH: - type0 |= bit; + type0 = 1; fallthrough; case IRQ_TYPE_LEVEL_LOW: - type1 |= bit; + type1 = 1; handler = handle_level_irq; break; default: @@ -631,25 +586,15 @@ static int aspeed_gpio_set_type(struct irq_data *d, unsigned int type) } raw_spin_lock_irqsave(&gpio->lock, flags); - copro = aspeed_gpio_copro_request(gpio, offset); - - addr = bank_reg(gpio, bank, reg_irq_type0); - reg = ioread32(addr); - reg = (reg & ~bit) | type0; - iowrite32(reg, addr); + if (gpio->llops->copro_request) + copro = gpio->llops->copro_request(gpio, offset); - addr = bank_reg(gpio, bank, reg_irq_type1); - reg = ioread32(addr); - reg = (reg & ~bit) | type1; - iowrite32(reg, addr); + gpio->llops->reg_bits_set(gpio, offset, reg_irq_type0, type0); + gpio->llops->reg_bits_set(gpio, offset, reg_irq_type1, type1); + gpio->llops->reg_bits_set(gpio, offset, reg_irq_type2, type2); - addr = bank_reg(gpio, bank, reg_irq_type2); - reg = ioread32(addr); - reg = (reg & ~bit) | type2; - iowrite32(reg, addr); - - if (copro) - aspeed_gpio_copro_release(gpio, offset); + if (copro && gpio->llops->copro_release) + gpio->llops->copro_release(gpio, offset); raw_spin_unlock_irqrestore(&gpio->lock, flags); irq_set_handler_locked(d, handler); @@ -661,7 +606,6 @@ static void aspeed_gpio_irq_handler(struct irq_desc *desc) { struct gpio_chip *gc = irq_desc_get_handler_data(desc); struct irq_chip *ic = irq_desc_get_chip(desc); - struct aspeed_gpio *data = gpiochip_get_data(gc); unsigned int i, p, banks; unsigned long reg; struct aspeed_gpio *gpio = gpiochip_get_data(gc); @@ -670,9 +614,7 @@ static void aspeed_gpio_irq_handler(struct irq_desc *desc) banks = DIV_ROUND_UP(gpio->chip.ngpio, 32); for (i = 0; i < banks; i++) { - const struct aspeed_gpio_bank *bank = &aspeed_gpio_banks[i]; - - reg = ioread32(bank_reg(data, bank, reg_irq_status)); + reg = gpio->llops->reg_bits_read(gpio, i, reg_irq_status); for_each_set_bit(p, ®, 32) generic_handle_domain_irq(gc->irq.domain, i * 32 + p); @@ -711,26 +653,16 @@ static int aspeed_gpio_reset_tolerance(struct gpio_chip *chip, { struct aspeed_gpio *gpio = gpiochip_get_data(chip); unsigned long flags; - void __iomem *treg; bool copro; - u32 val; - - treg = bank_reg(gpio, to_bank(offset), reg_tolerance); raw_spin_lock_irqsave(&gpio->lock, flags); - copro = aspeed_gpio_copro_request(gpio, offset); + if (gpio->llops->copro_request) + copro = gpio->llops->copro_request(gpio, offset); - val = readl(treg); + gpio->llops->reg_bits_set(gpio, offset, reg_tolerance, enable); - if (enable) - val |= GPIO_BIT(offset); - else - val &= ~GPIO_BIT(offset); - - writel(val, treg); - - if (copro) - aspeed_gpio_copro_release(gpio, offset); + if (copro && gpio->llops->copro_release) + gpio->llops->copro_release(gpio, offset); raw_spin_unlock_irqrestore(&gpio->lock, flags); return 0; @@ -821,21 +753,11 @@ static inline bool timer_allocation_registered(struct aspeed_gpio *gpio, static void configure_timer(struct aspeed_gpio *gpio, unsigned int offset, unsigned int timer) { - const struct aspeed_gpio_bank *bank = to_bank(offset); - const u32 mask = GPIO_BIT(offset); - void __iomem *addr; - u32 val; - /* Note: Debounce timer isn't under control of the command * source registers, so no need to sync with the coprocessor */ - addr = bank_reg(gpio, bank, reg_debounce_sel1); - val = ioread32(addr); - iowrite32((val & ~mask) | GPIO_SET_DEBOUNCE1(timer, offset), addr); - - addr = bank_reg(gpio, bank, reg_debounce_sel2); - val = ioread32(addr); - iowrite32((val & ~mask) | GPIO_SET_DEBOUNCE2(timer, offset), addr); + gpio->llops->reg_bits_set(gpio, offset, reg_debounce_sel1, !!(timer & BIT(1))); + gpio->llops->reg_bits_set(gpio, offset, reg_debounce_sel2, !!(timer & BIT(0))); } static int enable_debounce(struct gpio_chip *chip, unsigned int offset, @@ -866,15 +788,15 @@ static int enable_debounce(struct gpio_chip *chip, unsigned int offset, } /* Try to find a timer already configured for the debounce period */ - for (i = 1; i < ARRAY_SIZE(debounce_timers); i++) { + for (i = 1; i < gpio->debounce_timers_num; i++) { u32 cycles; - cycles = ioread32(gpio->base + debounce_timers[i]); + cycles = ioread32(gpio->base + gpio->debounce_timers_array[i]); if (requested_cycles == cycles) break; } - if (i == ARRAY_SIZE(debounce_timers)) { + if (i == gpio->debounce_timers_num) { int j; /* @@ -905,7 +827,7 @@ static int enable_debounce(struct gpio_chip *chip, unsigned int offset, i = j; - iowrite32(requested_cycles, gpio->base + debounce_timers[i]); + iowrite32(requested_cycles, gpio->base + gpio->debounce_timers_array[i]); } if (WARN(i == 0, "Cannot register index of disabled timer\n")) { @@ -1027,7 +949,7 @@ int aspeed_gpio_copro_grab_gpio(struct gpio_desc *desc, /* Switch command source */ if (gpio->cf_copro_bankmap[bindex] == 1) - aspeed_gpio_change_cmd_source(gpio, bank, bindex, + aspeed_gpio_change_cmd_source(gpio, offset, GPIO_CMDSRC_COLDFIRE); if (vreg_offset) @@ -1051,7 +973,6 @@ int aspeed_gpio_copro_release_gpio(struct gpio_desc *desc) struct gpio_chip *chip = gpiod_to_chip(desc); struct aspeed_gpio *gpio = gpiochip_get_data(chip); int rc = 0, bindex, offset = gpio_chip_hwgpio(desc); - const struct aspeed_gpio_bank *bank = to_bank(offset); unsigned long flags; if (!gpio->cf_copro_bankmap) @@ -1072,7 +993,7 @@ int aspeed_gpio_copro_release_gpio(struct gpio_desc *desc) /* Switch command source */ if (gpio->cf_copro_bankmap[bindex] == 0) - aspeed_gpio_change_cmd_source(gpio, bank, bindex, + aspeed_gpio_change_cmd_source(gpio, offset, GPIO_CMDSRC_ARM); bail: raw_spin_unlock_irqrestore(&gpio->lock, flags); @@ -1082,12 +1003,10 @@ EXPORT_SYMBOL_GPL(aspeed_gpio_copro_release_gpio); static void aspeed_gpio_irq_print_chip(struct irq_data *d, struct seq_file *p) { - const struct aspeed_gpio_bank *bank; struct aspeed_gpio *gpio; - u32 bit; int rc, offset; - rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit, &offset); + rc = irqd_to_aspeed_gpio_data(d, &gpio, &offset); if (rc) return; @@ -1120,7 +1039,7 @@ static const struct aspeed_bank_props ast2400_bank_props[] = { static const struct aspeed_gpio_config ast2400_config = /* 220 for simplicity, really 216 with two 4-GPIO holes, four at end */ - { .nr_gpios = 220, .props = ast2400_bank_props, }; + { .nr_gpios = 220, .props = ast2400_bank_props, .version = 4}; static const struct aspeed_bank_props ast2500_bank_props[] = { /* input output */ @@ -1132,7 +1051,7 @@ static const struct aspeed_bank_props ast2500_bank_props[] = { static const struct aspeed_gpio_config ast2500_config = /* 232 for simplicity, actual number is 228 (4-GPIO hole in GPIOAB) */ - { .nr_gpios = 232, .props = ast2500_bank_props, }; + { .nr_gpios = 232, .props = ast2500_bank_props, .version = 4}; static const struct aspeed_bank_props ast2600_bank_props[] = { /* input output */ @@ -1148,7 +1067,7 @@ static const struct aspeed_gpio_config ast2600_config = * We expect ngpio being set in the device tree and this is a fallback * option. */ - { .nr_gpios = 208, .props = ast2600_bank_props, }; + { .nr_gpios = 208, .props = ast2600_bank_props, .version = 4}; static const struct of_device_id aspeed_gpio_of_table[] = { { .compatible = "aspeed,ast2400-gpio", .data = &ast2400_config, }, @@ -1158,6 +1077,40 @@ static const struct of_device_id aspeed_gpio_of_table[] = { }; MODULE_DEVICE_TABLE(of, aspeed_gpio_of_table); +static void aspeed_g4_reg_bits_set(struct aspeed_gpio *gpio, unsigned int offset, + const enum aspeed_gpio_reg reg, u32 val) +{ + const struct aspeed_gpio_bank *bank = to_bank(offset); + void __iomem *addr = bank_reg(gpio, bank, reg); + u32 temp; + + temp = ioread32(addr); + if (val) + temp |= GPIO_BIT(offset); + else + temp &= ~GPIO_BIT(offset); + + iowrite32(temp, addr); +} + +static u32 aspeed_g4_reg_bits_read(struct aspeed_gpio *gpio, unsigned int offset, + const enum aspeed_gpio_reg reg) +{ + const struct aspeed_gpio_bank *bank = to_bank(offset); + void __iomem *addr = bank_reg(gpio, bank, reg); + + if (reg == reg_rdata) + return ioread32(addr); + return !!(ioread32(addr) & GPIO_BIT(offset)); +} + +struct aspeed_gpio_llops aspeed_g4_llops = { + .copro_request = aspeed_gpio_copro_request, + .copro_release = aspeed_gpio_copro_release, + .reg_bits_set = aspeed_g4_reg_bits_set, + .reg_bits_read = aspeed_g4_reg_bits_read, +}; + static int __init aspeed_gpio_probe(struct platform_device *pdev) { const struct of_device_id *gpio_id; @@ -1191,6 +1144,18 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev) gpio->config = gpio_id->data; + if (gpio->config->version == 4) { + if (!gpio->llops) + gpio->llops = &aspeed_g4_llops; + + if (!gpio->debounce_timers_array) { + gpio->debounce_timers_array = debounce_timers; + gpio->debounce_timers_num = ARRAY_SIZE(debounce_timers); + } + } else { + return -EOPNOTSUPP; + } + gpio->chip.parent = &pdev->dev; err = of_property_read_u32(pdev->dev.of_node, "ngpios", &ngpio); gpio->chip.ngpio = (u16) ngpio; @@ -1218,15 +1183,17 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev) * Populate it with initial values read from the HW and switch * all command sources to the ARM by default */ - for (i = 0; i < banks; i++) { - const struct aspeed_gpio_bank *bank = &aspeed_gpio_banks[i]; - void __iomem *addr = bank_reg(gpio, bank, reg_rdata); - gpio->dcache[i] = ioread32(addr); - aspeed_gpio_change_cmd_source(gpio, bank, 0, GPIO_CMDSRC_ARM); - aspeed_gpio_change_cmd_source(gpio, bank, 1, GPIO_CMDSRC_ARM); - aspeed_gpio_change_cmd_source(gpio, bank, 2, GPIO_CMDSRC_ARM); - aspeed_gpio_change_cmd_source(gpio, bank, 3, GPIO_CMDSRC_ARM); - } + if (gpio->config->version == 4) + for (i = 0; i < banks; i++) { + const struct aspeed_gpio_bank *bank = &aspeed_gpio_banks[i]; + void __iomem *addr = bank_reg(gpio, bank, reg_rdata); + + gpio->dcache[i] = ioread32(addr); + aspeed_gpio_change_cmd_source(gpio, i * 8 + 0, GPIO_CMDSRC_ARM); + aspeed_gpio_change_cmd_source(gpio, i * 8 + 8, GPIO_CMDSRC_ARM); + aspeed_gpio_change_cmd_source(gpio, i * 8 + 16, GPIO_CMDSRC_ARM); + aspeed_gpio_change_cmd_source(gpio, i * 8 + 24, GPIO_CMDSRC_ARM); + } /* Set up an irqchip */ irq = platform_get_irq(pdev, 0); From patchwork Fri Aug 30 03:40:47 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Billy Tsai X-Patchwork-Id: 1978693 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.ozlabs.org (client-ip=112.213.38.117; helo=lists.ozlabs.org; envelope-from=linux-aspeed-bounces+incoming=patchwork.ozlabs.org@lists.ozlabs.org; receiver=patchwork.ozlabs.org) Received: from lists.ozlabs.org (lists.ozlabs.org [112.213.38.117]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (secp384r1)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4Ww3qB6Byzz1yfn for ; Fri, 30 Aug 2024 13:41:42 +1000 (AEST) Received: from boromir.ozlabs.org (localhost [IPv6:::1]) by lists.ozlabs.org (Postfix) with ESMTP id 4Ww3qB17RNz30Vn for ; Fri, 30 Aug 2024 13:41:42 +1000 (AEST) X-Original-To: linux-aspeed@lists.ozlabs.org Delivered-To: linux-aspeed@lists.ozlabs.org Authentication-Results: lists.ozlabs.org; arc=none smtp.remote-ip=211.20.114.72 ARC-Seal: i=1; a=rsa-sha256; d=lists.ozlabs.org; s=201707; t=1724989298; cv=none; b=C9m9WiRBXLclwboEeQrpMXaLQPMbvZIA2NkoWmpZV/w6HdbzwhV+ywxOzYbbK/xJSkkxrI12BSK0PECWtGtpewSlyDzAYSUvQbZGP/ObnNDTlf4PpCImDMaQUB8op2Pq0ev3bZOJnxt0ApgbqrKGDuHuDgh/L4sfiWYcJMpRDOzJgPzL5JI0+cMgUq9eW5ADCvce3WmruYP0u8nA6tv6bOfBii8NJf1Xq7047PtG+wv9eVUVFQr5ttGQpqeHuE5jIHz5+hOiPvfBRPbrWIh4VeCWCqJm0ozHizRMrHmtqfTm+aAIS7ZQTHY3c02RUbZ5ib/eGgyRIJ+zpuAP/ZKqOg== ARC-Message-Signature: i=1; a=rsa-sha256; d=lists.ozlabs.org; s=201707; t=1724989298; c=relaxed/relaxed; bh=dfSalnUkx2431Uo8bQXWvVlNAZmxyxw8Aat/ocgZo4E=; h=Received:Received:From:To:Subject:Date:Message-ID:X-Mailer: In-Reply-To:References:MIME-Version:Content-Type: Content-Transfer-Encoding; b=KRyTlhgBf4oqud6AEhBlB2tLPuWxOCIckyF37A08ew5eeI7GF7MwpxdJPXWPls4/U8bbXjPUVTdC1V9coDZNiQ/PFvRW2t6PxHVRE4hPC6tLtKz167iO/ExETZA1ooM1KIbOHDdsUiimfvGSWsYjKAutKrCVOg4Ep1qovTT0A7Dxk45aglfT7Ee4ginntNJSNTeg4kPNFD9gWKTYzjawhNstwvznrU6PB+eslK/h+bgK3Y/35KuQpZvDYxe8G+hOsrFIYEIkfO0/vD9UZgM77fjkI2Nui1w0pp0uGlyNDaDRHFD8Mgy6CCqnvY2kW8+OKX5L3UV9E3NvbQrbh+a2HQ== ARC-Authentication-Results: i=1; lists.ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=aspeedtech.com; spf=pass (client-ip=211.20.114.72; helo=twmbx01.aspeed.com; envelope-from=billy_tsai@aspeedtech.com; receiver=lists.ozlabs.org) smtp.mailfrom=aspeedtech.com Authentication-Results: lists.ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=aspeedtech.com Authentication-Results: lists.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=aspeedtech.com (client-ip=211.20.114.72; helo=twmbx01.aspeed.com; envelope-from=billy_tsai@aspeedtech.com; receiver=lists.ozlabs.org) Received: from TWMBX01.aspeed.com (mail.aspeedtech.com [211.20.114.72]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by lists.ozlabs.org (Postfix) with ESMTPS id 4Ww3q56VcXz2yvw for ; Fri, 30 Aug 2024 13:41:37 +1000 (AEST) Received: from TWMBX01.aspeed.com (192.168.0.62) by TWMBX01.aspeed.com (192.168.0.62) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1258.12; Fri, 30 Aug 2024 11:40:48 +0800 Received: from mail.aspeedtech.com (192.168.10.10) by TWMBX01.aspeed.com (192.168.0.62) with Microsoft SMTP Server id 15.2.1258.12 via Frontend Transport; Fri, 30 Aug 2024 11:40:48 +0800 From: Billy Tsai To: , , , , , , , , , , , , Subject: [PATCH v2 4/4] gpio: aspeed: Support G7 Aspeed gpio controller Date: Fri, 30 Aug 2024 11:40:47 +0800 Message-ID: <20240830034047.2251482-5-billy_tsai@aspeedtech.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20240830034047.2251482-1-billy_tsai@aspeedtech.com> References: <20240830034047.2251482-1-billy_tsai@aspeedtech.com> MIME-Version: 1.0 X-BeenThere: linux-aspeed@lists.ozlabs.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Linux ASPEED SoC development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: linux-aspeed-bounces+incoming=patchwork.ozlabs.org@lists.ozlabs.org Sender: "Linux-aspeed" In the 7th generation of the SoC from Aspeed, the control logic of the GPIO controller has been updated to support per-pin control. Each pin now has its own 32-bit register, allowing for individual control of the pin’s value, direction, interrupt type, and other settings. The permission for coprocessor access is supported by the hardware but hasn’t been implemented in the current patch. Signed-off-by: Billy Tsai --- drivers/gpio/gpio-aspeed.c | 116 +++++++++++++++++++++++++++++++++++++ 1 file changed, 116 insertions(+) diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c index 74c4e80958bf..24f9c7312351 100644 --- a/drivers/gpio/gpio-aspeed.c +++ b/drivers/gpio/gpio-aspeed.c @@ -30,6 +30,23 @@ #include #include "gpiolib.h" +#define GPIO_G7_IRQ_STS_BASE 0x100 +#define GPIO_G7_IRQ_STS_OFFSET(x) (GPIO_G7_IRQ_STS_BASE + (x) * 0x4) +#define GPIO_G7_CTRL_REG_BASE 0x180 +#define GPIO_G7_CTRL_REG_OFFSET(x) (GPIO_G7_CTRL_REG_BASE + (x) * 0x4) +#define GPIO_G7_CTRL_OUT_DATA BIT(0) +#define GPIO_G7_CTRL_DIR BIT(1) +#define GPIO_G7_CTRL_IRQ_EN BIT(2) +#define GPIO_G7_CTRL_IRQ_TYPE0 BIT(3) +#define GPIO_G7_CTRL_IRQ_TYPE1 BIT(4) +#define GPIO_G7_CTRL_IRQ_TYPE2 BIT(5) +#define GPIO_G7_CTRL_RST_TOLERANCE BIT(6) +#define GPIO_G7_CTRL_DEBOUNCE_SEL2 BIT(7) +#define GPIO_G7_CTRL_DEBOUNCE_SEL1 BIT(8) +#define GPIO_G7_CTRL_INPUT_MASK BIT(9) +#define GPIO_G7_CTRL_IRQ_STS BIT(12) +#define GPIO_G7_CTRL_IN_DATA BIT(13) + struct aspeed_bank_props { unsigned int bank; u32 input; @@ -95,6 +112,7 @@ struct aspeed_gpio_bank { */ static const int debounce_timers[4] = { 0x00, 0x50, 0x54, 0x58 }; +static const int g7_debounce_timers[4] = { 0x00, 0x04, 0x00, 0x08 }; static const struct aspeed_gpio_copro_ops *copro_ops; static void *copro_data; @@ -246,6 +264,39 @@ static inline void __iomem *bank_reg(struct aspeed_gpio *gpio, BUG(); } +static inline u32 reg_mask(const enum aspeed_gpio_reg reg) +{ + switch (reg) { + case reg_val: + return GPIO_G7_CTRL_OUT_DATA; + case reg_dir: + return GPIO_G7_CTRL_DIR; + case reg_irq_enable: + return GPIO_G7_CTRL_IRQ_EN; + case reg_irq_type0: + return GPIO_G7_CTRL_IRQ_TYPE0; + case reg_irq_type1: + return GPIO_G7_CTRL_IRQ_TYPE1; + case reg_irq_type2: + return GPIO_G7_CTRL_IRQ_TYPE2; + case reg_tolerance: + return GPIO_G7_CTRL_RST_TOLERANCE; + case reg_debounce_sel1: + return GPIO_G7_CTRL_DEBOUNCE_SEL1; + case reg_debounce_sel2: + return GPIO_G7_CTRL_DEBOUNCE_SEL2; + case reg_rdata: + return GPIO_G7_CTRL_OUT_DATA; + case reg_irq_status: + return GPIO_G7_CTRL_IRQ_STS; + case reg_cmdsrc0: + case reg_cmdsrc1: + default: + WARN_ON_ONCE(1); + return 0; + } +} + #define GPIO_BANK(x) ((x) >> 5) #define GPIO_OFFSET(x) ((x) & 0x1f) #define GPIO_BIT(x) BIT(GPIO_OFFSET(x)) @@ -930,6 +981,9 @@ int aspeed_gpio_copro_grab_gpio(struct gpio_desc *desc, const struct aspeed_gpio_bank *bank = to_bank(offset); unsigned long flags; + if (gpio->config->version == 7) + return -EOPNOTSUPP; + if (!gpio->cf_copro_bankmap) gpio->cf_copro_bankmap = kzalloc(gpio->chip.ngpio >> 3, GFP_KERNEL); if (!gpio->cf_copro_bankmap) @@ -975,6 +1029,9 @@ int aspeed_gpio_copro_release_gpio(struct gpio_desc *desc) int rc = 0, bindex, offset = gpio_chip_hwgpio(desc); unsigned long flags; + if (gpio->config->version == 7) + return -EOPNOTSUPP; + if (!gpio->cf_copro_bankmap) return -ENXIO; @@ -1069,10 +1126,27 @@ static const struct aspeed_gpio_config ast2600_config = */ { .nr_gpios = 208, .props = ast2600_bank_props, .version = 4}; +static const struct aspeed_bank_props ast2700_bank_props[] = { + /* input output */ + { 1, 0x0fffffff, 0x0fffffff }, /* E/F/G/H, 4-GPIO hole */ + { 6, 0x00ffffff, 0x00ffffff }, /* Y/Z/AA */ + {}, +}; + +static const struct aspeed_gpio_config ast2700_config = + /* + * ast2700 has two controllers one with 212 GPIOs and one with 16 GPIOs. + * 216 for simplicity, actual number is 212 (4-GPIO hole in GPIOH) + * We expect ngpio being set in the device tree and this is a fallback + * option. + */ + { .nr_gpios = 216, .props = ast2700_bank_props, .version = 7 }; + static const struct of_device_id aspeed_gpio_of_table[] = { { .compatible = "aspeed,ast2400-gpio", .data = &ast2400_config, }, { .compatible = "aspeed,ast2500-gpio", .data = &ast2500_config, }, { .compatible = "aspeed,ast2600-gpio", .data = &ast2600_config, }, + { .compatible = "aspeed,ast2700-gpio", .data = &ast2700_config, }, {} }; MODULE_DEVICE_TABLE(of, aspeed_gpio_of_table); @@ -1111,6 +1185,40 @@ struct aspeed_gpio_llops aspeed_g4_llops = { .reg_bits_read = aspeed_g4_reg_bits_read, }; +static void aspeed_g7_reg_bits_set(struct aspeed_gpio *gpio, unsigned int offset, + const enum aspeed_gpio_reg reg, u32 val) +{ + u32 mask = reg_mask(reg); + void __iomem *addr = gpio->base + GPIO_G7_CTRL_REG_OFFSET(offset); + u32 write_val = (ioread32(addr) & ~(mask)) | (((val) << (ffs(mask) - 1)) & (mask)); + + iowrite32(write_val, addr); +} + +static u32 aspeed_g7_reg_bits_read(struct aspeed_gpio *gpio, unsigned int offset, + const enum aspeed_gpio_reg reg) +{ + u32 mask = reg_mask(reg); + void __iomem *addr; + + if (reg == reg_irq_status) { + addr = gpio->base + GPIO_G7_IRQ_STS_OFFSET(offset); + return ioread32(addr); + } + addr = gpio->base + GPIO_G7_CTRL_REG_OFFSET(offset); + if (reg == reg_val) + mask = GPIO_G7_CTRL_IN_DATA; + + return (((ioread32(addr)) & (mask)) >> (ffs(mask) - 1)); +} + +struct aspeed_gpio_llops aspeed_g7_llops = { + .copro_request = NULL, + .copro_release = NULL, + .reg_bits_set = aspeed_g7_reg_bits_set, + .reg_bits_read = aspeed_g7_reg_bits_read, +}; + static int __init aspeed_gpio_probe(struct platform_device *pdev) { const struct of_device_id *gpio_id; @@ -1152,6 +1260,14 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev) gpio->debounce_timers_array = debounce_timers; gpio->debounce_timers_num = ARRAY_SIZE(debounce_timers); } + } else if (gpio->config->version == 7) { + if (!gpio->llops) + gpio->llops = &aspeed_g7_llops; + + if (!gpio->debounce_timers_array) { + gpio->debounce_timers_array = g7_debounce_timers; + gpio->debounce_timers_num = ARRAY_SIZE(g7_debounce_timers); + } } else { return -EOPNOTSUPP; }