From patchwork Wed Aug 23 13:25:44 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Laurentiu Tudor X-Patchwork-Id: 1824697 X-Patchwork-Delegate: van.freenix@gmail.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=nxp.com header.i=@nxp.com header.a=rsa-sha256 header.s=selector2 header.b=G2XVoRlP; dkim-atps=neutral Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org) Received: from phobos.denx.de (phobos.denx.de [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (secp384r1)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4RW6S019S6z1yNm for ; Wed, 23 Aug 2023 23:26:23 +1000 (AEST) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id F0357864B3; Wed, 23 Aug 2023 15:26:15 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=nxp.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (1024-bit key; unprotected) header.d=nxp.com header.i=@nxp.com header.b="G2XVoRlP"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 99DDF864C1; Wed, 23 Aug 2023 15:26:14 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-1.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,FORGED_SPF_HELO,SPF_HELO_PASS, T_SPF_PERMERROR,UPPERCASE_50_75 autolearn=no autolearn_force=no version=3.4.2 Received: from EUR04-DB3-obe.outbound.protection.outlook.com (mail-db3eur04on0626.outbound.protection.outlook.com [IPv6:2a01:111:f400:fe0c::626]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id E29558634D for ; Wed, 23 Aug 2023 15:26:10 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=nxp.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=laurentiu.tudor@nxp.com ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=HskbHn2SYNNMF88nkci3UunhAHL18S1njrCPcG+3xI8lZlZZRKpYiGimJwnZ4/pmdx8q7kLA4ABFzk0MygmBbvbro3Gztmujw8SZGKQziMzhVtWVEiIPn5RNvD08XXQFRer8nkrj1BGTVPN6EJGAuZ5FSMMK5HHdj2ApYAdUX4hvD/OM8BsphEjC5uzOrIE54RQ0EKsQCXLjrXKfWhOQVVPyy2RUzWibjFcIgjZOC2V8afQ7VV/Gwx9QztVslk3j6yV9/uqx5QOk9ZKFfme+uD8Lot17g+U+DIiHc2v387h3j8HLYOFfcrMJv9m4ZEwclsWyTlqswEjQlkq8CoKgKQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=NO5p3r6Jui4e9i9kzeOwaRj4692aRG7s/U6PhUoD1kY=; b=keTY9Jq9FW8iQw8IZh/TyWUr/EhoNtnA/1lZU1QdcwOIR0IN9chgnNKZgGTsTnJwziN6jUtJQQXWDNZWIOBPBMpBtDjUtHP+tY7sDjPfLUASKuPnrsxPc8BFsGFYlK8r1eAG+DE9UGueubRlRkhFEEk4qGlM/seeyAM6JNcWHeY2yJgg2HT2fMG9dqlHPo+7liR9WIdpa21336gy/B8QzKIQMq8+cXXv6Tb9oZuQEHyKPO/a3ZOo4b/96i1TsHRWDx8K4lPj/ydPJl87NWpTZ1Z3AIynSF76AkClMFHCSk5ZmVNU0M/b56CTTibgBLqbzSXuSAb+HNdnaaH+5pQUEQ== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=nxp.com; dmarc=pass action=none header.from=nxp.com; dkim=pass header.d=nxp.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=nxp.com; s=selector2; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=NO5p3r6Jui4e9i9kzeOwaRj4692aRG7s/U6PhUoD1kY=; b=G2XVoRlPeobmanI+zkypBEmn/YacIR9F741skE4I5c/TwOy4FBArLJEtUvSoGb9hYGzlBcMsPuga7ArULjLrmq96bM0iNFDX3xLhZsgSpz3RrSeW1nKU/y9ggsdYoBEfK997IIWUbBpa+adDUrRsk1lwtlES6IsymzyIKlnVdA4= Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=nxp.com; Received: from AS1PR04MB9382.eurprd04.prod.outlook.com (2603:10a6:20b:4da::15) by DB9PR04MB8252.eurprd04.prod.outlook.com (2603:10a6:10:24d::7) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6699.26; Wed, 23 Aug 2023 13:25:59 +0000 Received: from AS1PR04MB9382.eurprd04.prod.outlook.com ([fe80::efa8:cb35:bebd:3d10]) by AS1PR04MB9382.eurprd04.prod.outlook.com ([fe80::efa8:cb35:bebd:3d10%7]) with mapi id 15.20.6699.026; Wed, 23 Aug 2023 13:25:59 +0000 From: laurentiu.tudor@nxp.com To: rajesh.bhagat@nxp.com, pramod.kumar_1@nxp.com, andy.tang@nxp.com, mingkai.hu@nxp.com, Ashish.Kumar@nxp.com, priyanka.jain@nxp.com, wasim.khan@nxp.com, matt@traverse.com.au, udit.agarwal@nxp.com, joe.hershberger@ni.com, peng.fan@nxp.com, sjg@chromium.org, u-boot@lists.denx.de Cc: michael@walle.cc, camelia.groza@nxp.com, ioana.ciornei@nxp.com, vladimir.oltean@nxp.com, Laurentiu Tudor Subject: [PATCH v3 1/3] configs: layerscape: delete defconfigs using legacy PPA secure FW (part1) Date: Wed, 23 Aug 2023 16:25:44 +0300 Message-Id: <20230823132546.6048-2-laurentiu.tudor@nxp.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20230823132546.6048-1-laurentiu.tudor@nxp.com> References: <20230823132546.6048-1-laurentiu.tudor@nxp.com> X-ClientProxiedBy: AS4P251CA0009.EURP251.PROD.OUTLOOK.COM (2603:10a6:20b:5d2::20) To AS1PR04MB9382.eurprd04.prod.outlook.com (2603:10a6:20b:4da::15) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: AS1PR04MB9382:EE_|DB9PR04MB8252:EE_ X-MS-Office365-Filtering-Correlation-Id: 60f88668-42c0-4cb7-4745-08dba3dc7d02 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:AS1PR04MB9382.eurprd04.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230031)(376002)(396003)(136003)(366004)(346002)(39860400002)(1800799009)(186009)(451199024)(83380400001)(30864003)(2906002)(921005)(38100700002)(38350700002)(86362001)(36756003)(6512007)(9686003)(41300700001)(66556008)(66476007)(66946007)(6506007)(6486002)(316002)(52116002)(2616005)(4326008)(8936002)(8676002)(478600001)(6666004)(26005)(1076003)(5660300002)(579004)(559001); DIR:OUT; SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: nxp.com X-MS-Exchange-CrossTenant-Network-Message-Id: 60f88668-42c0-4cb7-4745-08dba3dc7d02 X-MS-Exchange-CrossTenant-AuthSource: AS1PR04MB9382.eurprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 23 Aug 2023 13:25:59.1611 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 686ea1d3-bc2b-4c6f-a92c-d99c5c301635 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: GKx+EOXyBGEY8NFhtiRR3Xfx16lmLGgIVsV4buGIn/bNwWL0UuUroK+Ag9XOQnqHpwyJ0dapZwAm2VcM0LJEFg== X-MS-Exchange-Transport-CrossTenantHeadersStamped: DB9PR04MB8252 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean From: Laurentiu Tudor PPA was a secure firmware developed in-house which is no longer supported and replaced by TF-A quite some years ago. This makes the defconfigs that make use of PPA obsolete, so remove them. Signed-off-by: Laurentiu Tudor --- configs/ls1012a2g5rdb_qspi_defconfig | 69 --------- configs/ls1012afrdm_qspi_defconfig | 67 --------- .../ls1012afrwy_qspi_SECURE_BOOT_defconfig | 72 --------- configs/ls1012afrwy_qspi_defconfig | 72 --------- configs/ls1012aqds_qspi_defconfig | 95 ------------ configs/ls1012ardb_qspi_SECURE_BOOT_defconfig | 77 ---------- configs/ls1012ardb_qspi_defconfig | 77 ---------- configs/ls1043aqds_defconfig | 107 -------------- configs/ls1043aqds_lpuart_defconfig | 109 -------------- configs/ls1043aqds_nand_defconfig | 138 ------------------ configs/ls1043aqds_nor_ddr3_defconfig | 108 -------------- configs/ls1043aqds_qspi_defconfig | 98 ------------- configs/ls1043aqds_sdcard_ifc_defconfig | 135 ----------------- configs/ls1043aqds_sdcard_qspi_defconfig | 124 ---------------- configs/ls1043ardb_SECURE_BOOT_defconfig | 99 ------------- configs/ls1043ardb_defconfig | 100 ------------- configs/ls1043ardb_nand_SECURE_BOOT_defconfig | 124 ---------------- configs/ls1043ardb_nand_defconfig | 128 ---------------- .../ls1043ardb_sdcard_SECURE_BOOT_defconfig | 124 ---------------- configs/ls1043ardb_sdcard_defconfig | 126 ---------------- configs/ls2080aqds_SECURE_BOOT_defconfig | 108 -------------- configs/ls2080aqds_defconfig | 109 -------------- configs/ls2080aqds_sdcard_defconfig | 116 --------------- configs/ls2080ardb_SECURE_BOOT_defconfig | 106 -------------- configs/ls2080ardb_defconfig | 107 -------------- 25 files changed, 2595 deletions(-) delete mode 100644 configs/ls1012a2g5rdb_qspi_defconfig delete mode 100644 configs/ls1012afrdm_qspi_defconfig delete mode 100644 configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig delete mode 100644 configs/ls1012afrwy_qspi_defconfig delete mode 100644 configs/ls1012aqds_qspi_defconfig delete mode 100644 configs/ls1012ardb_qspi_SECURE_BOOT_defconfig delete mode 100644 configs/ls1012ardb_qspi_defconfig delete mode 100644 configs/ls1043aqds_defconfig delete mode 100644 configs/ls1043aqds_lpuart_defconfig delete mode 100644 configs/ls1043aqds_nand_defconfig delete mode 100644 configs/ls1043aqds_nor_ddr3_defconfig delete mode 100644 configs/ls1043aqds_qspi_defconfig delete mode 100644 configs/ls1043aqds_sdcard_ifc_defconfig delete mode 100644 configs/ls1043aqds_sdcard_qspi_defconfig delete mode 100644 configs/ls1043ardb_SECURE_BOOT_defconfig delete mode 100644 configs/ls1043ardb_defconfig delete mode 100644 configs/ls1043ardb_nand_SECURE_BOOT_defconfig delete mode 100644 configs/ls1043ardb_nand_defconfig delete mode 100644 configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig delete mode 100644 configs/ls1043ardb_sdcard_defconfig delete mode 100644 configs/ls2080aqds_SECURE_BOOT_defconfig delete mode 100644 configs/ls2080aqds_defconfig delete mode 100644 configs/ls2080aqds_sdcard_defconfig delete mode 100644 configs/ls2080ardb_SECURE_BOOT_defconfig delete mode 100644 configs/ls2080ardb_defconfig diff --git a/configs/ls1012a2g5rdb_qspi_defconfig b/configs/ls1012a2g5rdb_qspi_defconfig deleted file mode 100644 index 72b590a73b4c..000000000000 --- a/configs/ls1012a2g5rdb_qspi_defconfig +++ /dev/null @@ -1,69 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1012A2G5RDB=y -CONFIG_TEXT_BASE=0x40100000 -CONFIG_SYS_MALLOC_LEN=0x500000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_ENV_SECT_SIZE=0x40000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-2g5rdb" -CONFIG_FSL_LS_PPA=y -CONFIG_QSPI_AHB_INIT=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -# CONFIG_SYS_MALLOC_F is not set -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_QSPI_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" -CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;" -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_DM_SPI_FLASH=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_SPANSION=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_FSL_PFE=y -CONFIG_DM_RTC=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1012afrdm_qspi_defconfig b/configs/ls1012afrdm_qspi_defconfig deleted file mode 100644 index 7e12f6ef546b..000000000000 --- a/configs/ls1012afrdm_qspi_defconfig +++ /dev/null @@ -1,67 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1012AFRDM=y -CONFIG_TEXT_BASE=0x40100000 -CONFIG_SYS_MALLOC_LEN=0x500000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_ENV_SECT_SIZE=0x40000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-frdm" -CONFIG_FSL_LS_PPA=y -CONFIG_QSPI_AHB_INIT=y -CONFIG_PCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -# CONFIG_SYS_MALLOC_F is not set -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_QSPI_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" -CONFIG_BOOTCOMMAND="run distro_bootcmd;run qspi_bootcmd" -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_DM_SPI_FLASH=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_SPANSION=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_FSL_PFE=y -CONFIG_E1000=y -CONFIG_NVME_PCI=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_RTC=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig deleted file mode 100644 index 4e5079dcc492..000000000000 --- a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig +++ /dev/null @@ -1,72 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1012AFRWY=y -CONFIG_TEXT_BASE=0x40100000 -CONFIG_SYS_MALLOC_LEN=0x500000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-frwy" -CONFIG_FSL_LS_PPA=y -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_NXP_ESBC=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -# CONFIG_SYS_MALLOC_F is not set -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_QSPI_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" -CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;" -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_FSL_SEC_MON_BE=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_DM_SPI_FLASH=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_FSL_PFE=y -CONFIG_E1000=y -CONFIG_NVME_PCI=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_RTC=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_RSA=y -CONFIG_RSA_SOFTWARE_EXP=y diff --git a/configs/ls1012afrwy_qspi_defconfig b/configs/ls1012afrwy_qspi_defconfig deleted file mode 100644 index b944f803f70c..000000000000 --- a/configs/ls1012afrwy_qspi_defconfig +++ /dev/null @@ -1,72 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1012AFRWY=y -CONFIG_TEXT_BASE=0x40100000 -CONFIG_SYS_MALLOC_LEN=0x500000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x1D0000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-frwy" -CONFIG_FSL_LS_PPA=y -CONFIG_ENV_ADDR=0x401D0000 -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -# CONFIG_SYS_MALLOC_F is not set -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_QSPI_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" -CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;" -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_DM_SPI_FLASH=y -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_FSL_PFE=y -CONFIG_E1000=y -CONFIG_NVME_PCI=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_RTC=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1012aqds_qspi_defconfig b/configs/ls1012aqds_qspi_defconfig deleted file mode 100644 index 34bdb1abafc7..000000000000 --- a/configs/ls1012aqds_qspi_defconfig +++ /dev/null @@ -1,95 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1012AQDS=y -CONFIG_TEXT_BASE=0x40100000 -CONFIG_SYS_MALLOC_LEN=0x500000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_ENV_SECT_SIZE=0x40000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-qds" -CONFIG_FSL_LS_PPA=y -CONFIG_QSPI_AHB_INIT=y -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_FSL_QIXIS=y -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -# CONFIG_SYS_MALLOC_F is not set -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_QSPI_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" -CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;" -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_MISC_INIT_R=y -CONFIG_ID_EEPROM=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_GREPENV=y -CONFIG_CMD_EEPROM=y -CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_SPI=y -CONFIG_DEFAULT_SPI_BUS=1 -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_ENV_SPI_BUS=0 -CONFIG_ENV_SPI_MAX_HZ=1000000 -CONFIG_ENV_SPI_MODE=0x03 -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_BUS=1 -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_FSL_PFE=y -CONFIG_E1000=y -CONFIG_NVME_PCI=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_RTC=y -CONFIG_RTC_PCF8563=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig deleted file mode 100644 index dcd18b4eb8cc..000000000000 --- a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig +++ /dev/null @@ -1,77 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1012ARDB=y -CONFIG_TEXT_BASE=0x40100000 -CONFIG_SYS_MALLOC_LEN=0x500000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-rdb" -CONFIG_FSL_LS_PPA=y -CONFIG_QSPI_AHB_INIT=y -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_NXP_ESBC=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -# CONFIG_SYS_MALLOC_F is not set -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_QSPI_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" -CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;" -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_FSL_SEC_MON_BE=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_DM_SPI_FLASH=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_SPANSION=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_E1000=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_RTC=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_RSA=y -CONFIG_RSA_SOFTWARE_EXP=y diff --git a/configs/ls1012ardb_qspi_defconfig b/configs/ls1012ardb_qspi_defconfig deleted file mode 100644 index 10fe826f99a0..000000000000 --- a/configs/ls1012ardb_qspi_defconfig +++ /dev/null @@ -1,77 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1012ARDB=y -CONFIG_TEXT_BASE=0x40100000 -CONFIG_SYS_MALLOC_LEN=0x500000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_ENV_SECT_SIZE=0x40000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-rdb" -CONFIG_FSL_LS_PPA=y -CONFIG_QSPI_AHB_INIT=y -CONFIG_ENV_ADDR=0x40300000 -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -# CONFIG_SYS_MALLOC_F is not set -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_QSPI_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" -CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;" -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_GREPENV=y -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_DM_SPI_FLASH=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_SPANSION=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_FSL_PFE=y -CONFIG_E1000=y -CONFIG_NVME_PCI=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_RTC=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1043aqds_defconfig b/configs/ls1043aqds_defconfig deleted file mode 100644 index 18bf4bd8792c..000000000000 --- a/configs/ls1043aqds_defconfig +++ /dev/null @@ -1,107 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1043AQDS=y -CONFIG_TEXT_BASE=0x60100000 -CONFIG_SYS_MALLOC_LEN=0x120000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" -CONFIG_FSL_LS_PPA=y -CONFIG_ENV_ADDR=0x60300000 -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls1043aqds_vdd_mv" -CONFIG_VOL_MONITOR_INA220=y -CONFIG_VOL_MONITOR_IR36021_SET=y -CONFIG_FSL_QIXIS=y -# CONFIG_QIXIS_I2C_ACCESS is not set -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_ARCH_MISC_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DYNAMIC_DDR_CLK_FREQ=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SF_DEFAULT_BUS=1 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_E1000=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1043aqds_lpuart_defconfig b/configs/ls1043aqds_lpuart_defconfig deleted file mode 100644 index 9dcbe71ad0c1..000000000000 --- a/configs/ls1043aqds_lpuart_defconfig +++ /dev/null @@ -1,109 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1043AQDS=y -CONFIG_TEXT_BASE=0x60100000 -CONFIG_SYS_MALLOC_LEN=0x120000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-lpuart" -CONFIG_FSL_LS_PPA=y -CONFIG_ENV_ADDR=0x60300000 -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls1043aqds_vdd_mv" -CONFIG_VOL_MONITOR_INA220=y -CONFIG_VOL_MONITOR_IR36021_SET=y -CONFIG_FSL_QIXIS=y -# CONFIG_QIXIS_I2C_ACCESS is not set -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_ARCH_MISC_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DYNAMIC_DDR_CLK_FREQ=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SF_DEFAULT_BUS=1 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_E1000=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_SCSI=y -CONFIG_DM_SERIAL=y -CONFIG_FSL_LPUART=y -CONFIG_LPUART=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1043aqds_nand_defconfig b/configs/ls1043aqds_nand_defconfig deleted file mode 100644 index e5f570a3b3c1..000000000000 --- a/configs/ls1043aqds_nand_defconfig +++ /dev/null @@ -1,138 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1043AQDS=y -CONFIG_TEXT_BASE=0x82000000 -CONFIG_SYS_MALLOC_LEN=0x102000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" -CONFIG_SPL_TEXT_BASE=0x10000000 -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x1001d000 -CONFIG_SPL=y -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls1043aqds_vdd_mv" -CONFIG_VOL_MONITOR_INA220=y -CONFIG_VOL_MONITOR_IR36021_SET=y -CONFIG_FSL_QIXIS=y -# CONFIG_QIXIS_I2C_ACCESS is not set -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1043aqds/ls1043aqds_pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg" -CONFIG_DISTRO_DEFAULTS=y -CONFIG_NAND_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_ARCH_MISC_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_SPL_MAX_SIZE=0x1a000 -CONFIG_SPL_PAD_TO=0x20000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x80100000 -CONFIG_SPL_BSS_MAX_SIZE=0x80000 -CONFIG_SPL_FSL_PBL=y -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80200000 -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_SPL_NAND_SUPPORT=y -CONFIG_SPL_WATCHDOG=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DYNAMIC_DDR_CLK_FREQ=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y -CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000 -CONFIG_SF_DEFAULT_BUS=1 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_E1000=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1043aqds_nor_ddr3_defconfig b/configs/ls1043aqds_nor_ddr3_defconfig deleted file mode 100644 index 67d8288abb00..000000000000 --- a/configs/ls1043aqds_nor_ddr3_defconfig +++ /dev/null @@ -1,108 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1043AQDS=y -CONFIG_TEXT_BASE=0x60100000 -CONFIG_SYS_MALLOC_LEN=0x120000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" -CONFIG_FSL_LS_PPA=y -CONFIG_ENV_ADDR=0x60300000 -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls1043aqds_vdd_mv" -CONFIG_VOL_MONITOR_INA220=y -CONFIG_VOL_MONITOR_IR36021_SET=y -CONFIG_FSL_QIXIS=y -# CONFIG_QIXIS_I2C_ACCESS is not set -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_ARCH_MISC_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DYNAMIC_DDR_CLK_FREQ=y -CONFIG_SYS_FSL_DDR3=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SF_DEFAULT_BUS=1 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_E1000=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1043aqds_qspi_defconfig b/configs/ls1043aqds_qspi_defconfig deleted file mode 100644 index fa0b47fde8c4..000000000000 --- a/configs/ls1043aqds_qspi_defconfig +++ /dev/null @@ -1,98 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1043AQDS=y -CONFIG_TEXT_BASE=0x40100000 -CONFIG_SYS_MALLOC_LEN=0x102000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" -CONFIG_FSL_LS_PPA=y -CONFIG_ENV_ADDR=0x40300000 -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls1043aqds_vdd_mv" -CONFIG_VOL_MONITOR_INA220=y -CONFIG_VOL_MONITOR_IR36021_SET=y -CONFIG_FSL_QIXIS=y -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_QSPI_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_ARCH_MISC_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DYNAMIC_DDR_CLK_FREQ=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_EARLY_INIT=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_E1000=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1043aqds_sdcard_ifc_defconfig b/configs/ls1043aqds_sdcard_ifc_defconfig deleted file mode 100644 index 6cb961d33dcc..000000000000 --- a/configs/ls1043aqds_sdcard_ifc_defconfig +++ /dev/null @@ -1,135 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1043AQDS=y -CONFIG_TEXT_BASE=0x82000000 -CONFIG_SYS_MALLOC_LEN=0x102000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" -CONFIG_SPL_TEXT_BASE=0x10000000 -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x1001e000 -CONFIG_SPL=y -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls1043aqds_vdd_mv" -CONFIG_VOL_MONITOR_INA220=y -CONFIG_VOL_MONITOR_IR36021_SET=y -CONFIG_FSL_QIXIS=y -# CONFIG_QIXIS_I2C_ACCESS is not set -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1043aqds/ls1043aqds_pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg" -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SD_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_ARCH_MISC_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_SPL_MAX_SIZE=0x17000 -CONFIG_SPL_PAD_TO=0x1d000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x8f000000 -CONFIG_SPL_BSS_MAX_SIZE=0x80000 -CONFIG_SPL_FSL_PBL=y -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_SPL_WATCHDOG=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DYNAMIC_DDR_CLK_FREQ=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SF_DEFAULT_BUS=1 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_E1000=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1043aqds_sdcard_qspi_defconfig b/configs/ls1043aqds_sdcard_qspi_defconfig deleted file mode 100644 index 4e41508251da..000000000000 --- a/configs/ls1043aqds_sdcard_qspi_defconfig +++ /dev/null @@ -1,124 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1043AQDS=y -CONFIG_TEXT_BASE=0x82000000 -CONFIG_SYS_MALLOC_LEN=0x102000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" -CONFIG_SPL_TEXT_BASE=0x10000000 -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x1001e000 -CONFIG_SPL=y -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls1043aqds_vdd_mv" -CONFIG_VOL_MONITOR_INA220=y -CONFIG_VOL_MONITOR_IR36021_SET=y -CONFIG_FSL_QIXIS=y -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1043aqds/ls1043aqds_pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1043aqds/ls1043aqds_rcw_sd_qspi.cfg" -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SD_BOOT=y -CONFIG_SD_BOOT_QSPI=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_ARCH_MISC_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_SPL_MAX_SIZE=0x17000 -CONFIG_SPL_PAD_TO=0x1d000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x8f000000 -CONFIG_SPL_BSS_MAX_SIZE=0x80000 -CONFIG_SPL_FSL_PBL=y -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_SPL_WATCHDOG=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DYNAMIC_DDR_CLK_FREQ=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_EARLY_INIT=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_E1000=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig deleted file mode 100644 index ea195d7c5041..000000000000 --- a/configs/ls1043ardb_SECURE_BOOT_defconfig +++ /dev/null @@ -1,99 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1043ARDB=y -CONFIG_TEXT_BASE=0x60100000 -CONFIG_SYS_MALLOC_LEN=0x120000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x20000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" -CONFIG_FSL_LS_PPA=y -CONFIG_PCI=y -CONFIG_OF_BOARD_FIXUP=y -CONFIG_NXP_ESBC=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;" -CONFIG_MISC_INIT_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_IMLS=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_DM=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC3" -# CONFIG_DDR_SPD is not set -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_DDR_RAW_TIMING=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_FSL_SEC_MON_BE=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x53 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SF_DEFAULT_BUS=1 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_DM_MDIO=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x60900000 -CONFIG_NVME_PCI=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_SYS_QE_FW_ADDR=0x60940000 -CONFIG_SYS_QE_FMAN_FW_IN_NOR=y -CONFIG_SPECIFY_CONSOLE_INDEX=y -CONFIG_DM_SERIAL=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_RSA=y -CONFIG_RSA_SOFTWARE_EXP=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls1043ardb_defconfig b/configs/ls1043ardb_defconfig deleted file mode 100644 index ae8600ffd958..000000000000 --- a/configs/ls1043ardb_defconfig +++ /dev/null @@ -1,100 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1043ARDB=y -CONFIG_TEXT_BASE=0x60100000 -CONFIG_SYS_MALLOC_LEN=0x120000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" -CONFIG_FSL_LS_PPA=y -CONFIG_ENV_ADDR=0x60300000 -CONFIG_PCI=y -CONFIG_OF_BOARD_FIXUP=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;" -CONFIG_ARCH_MISC_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_IMLS=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_DM=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC3" -CONFIG_FSL_CAAM=y -# CONFIG_DDR_SPD is not set -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_DDR_RAW_TIMING=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x53 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SF_DEFAULT_BUS=1 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_DM_MDIO=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x60900000 -CONFIG_NVME_PCI=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_SYS_QE_FW_ADDR=0x60940000 -CONFIG_SYS_QE_FMAN_FW_IN_NOR=y -CONFIG_SPECIFY_CONSOLE_INDEX=y -CONFIG_DM_SERIAL=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig deleted file mode 100644 index d9ff0fd16a58..000000000000 --- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig +++ /dev/null @@ -1,124 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1043ARDB=y -CONFIG_TEXT_BASE=0x82000000 -CONFIG_SYS_MALLOC_LEN=0x102000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" -CONFIG_SPL_TEXT_BASE=0x10000000 -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1064960 -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x1001d000 -CONFIG_SPL=y -CONFIG_PCI=y -CONFIG_OF_BOARD_FIXUP=y -CONFIG_NXP_ESBC=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1043ardb/ls1043ardb_pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1043ardb/ls1043ardb_rcw_nand.cfg" -CONFIG_DISTRO_DEFAULTS=y -CONFIG_NAND_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_MISC_INIT_R=y -CONFIG_SPL_MAX_SIZE=0x1a000 -CONFIG_SPL_PAD_TO=0x20000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x80100000 -CONFIG_SPL_BSS_MAX_SIZE=0x80000 -CONFIG_SPL_FSL_PBL=y -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80200000 -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_SPL_NAND_SUPPORT=y -CONFIG_SPL_WATCHDOG=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_IMLS=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_DM=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC3" -CONFIG_SPL_DM=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_FSL_SEC_MON_BE=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x53 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y -CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000 -CONFIG_SF_DEFAULT_BUS=1 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_DM_MDIO=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x900000 -CONFIG_NVME_PCI=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_SYS_QE_FMAN_FW_IN_NAND=y -CONFIG_SPECIFY_CONSOLE_INDEX=y -CONFIG_DM_SERIAL=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -# CONFIG_SPL_USE_TINY_PRINTF is not set -CONFIG_RSA=y -CONFIG_SPL_RSA=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig deleted file mode 100644 index ad118187432e..000000000000 --- a/configs/ls1043ardb_nand_defconfig +++ /dev/null @@ -1,128 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1043ARDB=y -CONFIG_TEXT_BASE=0x82000000 -CONFIG_SYS_MALLOC_LEN=0x102000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" -CONFIG_SPL_TEXT_BASE=0x10000000 -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x1001d000 -CONFIG_SPL=y -CONFIG_PCI=y -CONFIG_OF_BOARD_FIXUP=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1043ardb/ls1043ardb_pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1043ardb/ls1043ardb_rcw_nand.cfg" -CONFIG_DISTRO_DEFAULTS=y -CONFIG_NAND_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_ARCH_MISC_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_SPL_MAX_SIZE=0x1a000 -CONFIG_SPL_PAD_TO=0x20000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x80100000 -CONFIG_SPL_BSS_MAX_SIZE=0x80000 -CONFIG_SPL_FSL_PBL=y -CONFIG_SPL_BOARD_INIT=y -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80200000 -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_SPL_NAND_SUPPORT=y -CONFIG_SPL_WATCHDOG=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_IMLS=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_DM=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC3" -CONFIG_FSL_CAAM=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x53 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y -CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000 -CONFIG_SF_DEFAULT_BUS=1 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_DM_MDIO=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x900000 -CONFIG_NVME_PCI=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_SYS_QE_FMAN_FW_IN_NAND=y -CONFIG_DM_SERIAL=y -CONFIG_SPL_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -# CONFIG_SPL_USE_TINY_PRINTF is not set -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig deleted file mode 100644 index fe0dd04f1f90..000000000000 --- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig +++ /dev/null @@ -1,124 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1043ARDB=y -CONFIG_TEXT_BASE=0x82000000 -CONFIG_SYS_MALLOC_LEN=0x102000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" -CONFIG_SPL_TEXT_BASE=0x10000000 -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1064960 -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x1001e000 -CONFIG_SPL=y -CONFIG_PCI=y -CONFIG_OF_BOARD_FIXUP=y -CONFIG_NXP_ESBC=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1043ardb/ls1043ardb_pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg" -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SD_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;" -CONFIG_MISC_INIT_R=y -CONFIG_SPL_MAX_SIZE=0x17000 -CONFIG_SPL_PAD_TO=0x1d000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x8f000000 -CONFIG_SPL_BSS_MAX_SIZE=0x80000 -CONFIG_SPL_FSL_PBL=y -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_SPL_WATCHDOG=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_IMLS=y -CONFIG_CMD_SPL=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_DM=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC3" -CONFIG_SPL_DM=y -# CONFIG_SPL_BLK is not set -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_FSL_SEC_MON_BE=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x53 -# CONFIG_SPL_DM_MMC is not set -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SF_DEFAULT_BUS=1 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_DM_MDIO=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x900000 -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_SYS_QE_FW_ADDR=0x940000 -CONFIG_SYS_QE_FMAN_FW_IN_MMC=y -CONFIG_SPECIFY_CONSOLE_INDEX=y -CONFIG_DM_SERIAL=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -# CONFIG_SPL_USE_TINY_PRINTF is not set -CONFIG_RSA=y -CONFIG_SPL_RSA=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig deleted file mode 100644 index aa5404cbb50e..000000000000 --- a/configs/ls1043ardb_sdcard_defconfig +++ /dev/null @@ -1,126 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1043ARDB=y -CONFIG_TEXT_BASE=0x82000000 -CONFIG_SYS_MALLOC_LEN=0x102000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" -CONFIG_SPL_TEXT_BASE=0x10000000 -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x1001e000 -CONFIG_SPL=y -CONFIG_PCI=y -CONFIG_OF_BOARD_FIXUP=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1043ardb/ls1043ardb_pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg" -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SD_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;" -CONFIG_ARCH_MISC_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_SPL_MAX_SIZE=0x17000 -CONFIG_SPL_PAD_TO=0x1d000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x8f000000 -CONFIG_SPL_BSS_MAX_SIZE=0x80000 -CONFIG_SPL_FSL_PBL=y -CONFIG_SPL_BOARD_INIT=y -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_SPL_WATCHDOG=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_IMLS=y -CONFIG_CMD_SPL=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_DM=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)" -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC3" -CONFIG_FSL_CAAM=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SPL_SYS_I2C_LEGACY=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x53 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SF_DEFAULT_BUS=1 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_DM_MDIO=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x900000 -CONFIG_NVME_PCI=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_SYS_QE_FW_ADDR=0x940000 -CONFIG_SYS_QE_FMAN_FW_IN_MMC=y -CONFIG_DM_SERIAL=y -CONFIG_SPL_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -# CONFIG_SPL_USE_TINY_PRINTF is not set -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls2080aqds_SECURE_BOOT_defconfig b/configs/ls2080aqds_SECURE_BOOT_defconfig deleted file mode 100644 index d8416265cfb3..000000000000 --- a/configs/ls2080aqds_SECURE_BOOT_defconfig +++ /dev/null @@ -1,108 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_GIC_V3_ITS=y -CONFIG_TARGET_LS2080AQDS=y -CONFIG_TEXT_BASE=0x30100000 -CONFIG_SYS_MALLOC_LEN=0x202000 -CONFIG_NR_DRAM_BANKS=3 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds" -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_NXP_ESBC=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_FSL_QIXIS=y -# CONFIG_QIXIS_I2C_ACCESS is not set -# CONFIG_SYS_MALLOC_F is not set -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -CONFIG_BOOTCOMMAND="fsl_mc apply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load" -CONFIG_RESET_PHY_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_EEPROM=y -CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_CMD_DATE=y -# CONFIG_ISO_PARTITION is not set -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="DPMAC1@xgmii" -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_DYNAMIC_DDR_CLK_FREQ=y -CONFIG_DIMM_SLOTS_PER_CTLR=2 -CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_FSL_DDR_INTLV_256B=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_ESDHC_DETECT_QUIRK=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_MAX_OOBFREE=2 -CONFIG_SYS_NAND_MAX_ECCPOS=256 -CONFIG_DM_SPI_FLASH=y -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TERANETICS=y -CONFIG_PHY_VITESSE=y -CONFIG_FSL_MEMAC=y -CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_RTC_ENABLE_32KHZ_OUTPUT=y -CONFIG_RTC_DS3231=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_RSA=y -CONFIG_RSA_SOFTWARE_EXP=y diff --git a/configs/ls2080aqds_defconfig b/configs/ls2080aqds_defconfig deleted file mode 100644 index be08d5ba86a8..000000000000 --- a/configs/ls2080aqds_defconfig +++ /dev/null @@ -1,109 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_GIC_V3_ITS=y -CONFIG_TARGET_LS2080AQDS=y -CONFIG_TEXT_BASE=0x30100000 -CONFIG_SYS_MALLOC_LEN=0x202000 -CONFIG_NR_DRAM_BANKS=3 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds" -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_ENV_ADDR=0x80300000 -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_FSL_QIXIS=y -# CONFIG_QIXIS_I2C_ACCESS is not set -# CONFIG_SYS_MALLOC_F is not set -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -CONFIG_BOOTCOMMAND="fsl_mc apply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load" -CONFIG_RESET_PHY_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_EEPROM=y -CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_CMD_DATE=y -# CONFIG_ISO_PARTITION is not set -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="DPMAC1@xgmii" -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DYNAMIC_DDR_CLK_FREQ=y -CONFIG_DIMM_SLOTS_PER_CTLR=2 -CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_FSL_DDR_INTLV_256B=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_ESDHC_DETECT_QUIRK=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_MAX_OOBFREE=2 -CONFIG_SYS_NAND_MAX_ECCPOS=256 -CONFIG_DM_SPI_FLASH=y -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TERANETICS=y -CONFIG_PHY_VITESSE=y -CONFIG_FSL_MEMAC=y -CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_RTC_ENABLE_32KHZ_OUTPUT=y -CONFIG_RTC_DS3231=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls2080aqds_sdcard_defconfig b/configs/ls2080aqds_sdcard_defconfig deleted file mode 100644 index b45819f87b3e..000000000000 --- a/configs/ls2080aqds_sdcard_defconfig +++ /dev/null @@ -1,116 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_GIC_V3_ITS=y -CONFIG_TARGET_LS2080AQDS=y -CONFIG_TEXT_BASE=0x80400000 -CONFIG_SYS_MALLOC_LEN=0x0220000 -CONFIG_SYS_MALLOC_F_LEN=0x400 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=3 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds" -CONFIG_SPL_TEXT_BASE=0x1800a000 -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x18009ff0 -CONFIG_SPL=y -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_FSL_QIXIS=y -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_SD_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -CONFIG_BOOTCOMMAND="mmc read 0x80200000 0x6800 0x800; fsl_mc apply dpl 0x80200000 && mmc read $kernel_load $kernel_start $kernel_size && bootm $kernel_load" -CONFIG_RESET_PHY_R=y -CONFIG_SPL_MAX_SIZE=0x16000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x80100000 -CONFIG_SPL_BSS_MAX_SIZE=0x100000 -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_SPL_TARGET="u-boot-with-spl.bin" -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_CMD_DATE=y -CONFIG_OF_CONTROL=y -CONFIG_OF_EMBED=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="DPMAC1@xgmii" -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_DYNAMIC_DDR_CLK_FREQ=y -CONFIG_DIMM_SLOTS_PER_CTLR=2 -CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_FSL_DDR_INTLV_256B=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_EARLY_INIT=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_ESDHC_DETECT_QUIRK=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_MAX_OOBFREE=2 -CONFIG_SYS_NAND_MAX_ECCPOS=256 -CONFIG_DM_SPI_FLASH=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TERANETICS=y -CONFIG_PHY_VITESSE=y -CONFIG_FSL_MEMAC=y -CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_RTC_ENABLE_32KHZ_OUTPUT=y -CONFIG_RTC_DS3231=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls2080ardb_SECURE_BOOT_defconfig b/configs/ls2080ardb_SECURE_BOOT_defconfig deleted file mode 100644 index bcd83018112c..000000000000 --- a/configs/ls2080ardb_SECURE_BOOT_defconfig +++ /dev/null @@ -1,106 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_GIC_V3_ITS=y -CONFIG_TARGET_LS2080ARDB=y -CONFIG_TEXT_BASE=0x30100000 -CONFIG_SYS_MALLOC_LEN=0x202000 -CONFIG_NR_DRAM_BANKS=3 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb" -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_NXP_ESBC=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls2080ardb_vdd_mv" -CONFIG_VOL_MONITOR_IR36021_READ=y -CONFIG_VOL_MONITOR_IR36021_SET=y -CONFIG_FSL_QIXIS=y -# CONFIG_QIXIS_I2C_ACCESS is not set -# CONFIG_SYS_MALLOC_F is not set -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -CONFIG_BOOTCOMMAND="env exists mcinitcmd && env exists secureboot && esbc_validate 0x5806C0000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x580d00000;run distro_bootcmd;run nor_bootcmd; env exists secureboot && esbc_halt;" -CONFIG_MISC_INIT_R=y -CONFIG_RESET_PHY_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_EEPROM=y -CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_CMD_DATE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="DPMAC1@xgmii" -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_DDR_CLK_FREQ=133333333 -CONFIG_DIMM_SLOTS_PER_CTLR=2 -CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_FSL_DDR_INTLV_256B=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_MAX_OOBFREE=2 -CONFIG_SYS_NAND_MAX_ECCPOS=256 -CONFIG_DM_SPI_FLASH=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_CORTINA=y -CONFIG_CORTINA_FW_ADDR=0x580980000 -CONFIG_FSL_MEMAC=y -CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_RTC_DS3231=y -CONFIG_DM_SCSI=y -CONFIG_CONS_INDEX=2 -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_RSA=y -CONFIG_RSA_SOFTWARE_EXP=y diff --git a/configs/ls2080ardb_defconfig b/configs/ls2080ardb_defconfig deleted file mode 100644 index 38ec438c3bca..000000000000 --- a/configs/ls2080ardb_defconfig +++ /dev/null @@ -1,107 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_GIC_V3_ITS=y -CONFIG_TARGET_LS2080ARDB=y -CONFIG_TEXT_BASE=0x30100000 -CONFIG_SYS_MALLOC_LEN=0x202000 -CONFIG_NR_DRAM_BANKS=3 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-rdb" -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_ENV_ADDR=0x80300000 -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls2080ardb_vdd_mv" -CONFIG_VOL_MONITOR_IR36021_READ=y -CONFIG_VOL_MONITOR_IR36021_SET=y -CONFIG_FSL_QIXIS=y -# CONFIG_QIXIS_I2C_ACCESS is not set -# CONFIG_SYS_MALLOC_F is not set -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -CONFIG_BOOTCOMMAND="env exists mcinitcmd && env exists secureboot && esbc_validate 0x5806C0000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x580d00000;run distro_bootcmd;run nor_bootcmd; env exists secureboot && esbc_halt;" -CONFIG_MISC_INIT_R=y -CONFIG_RESET_PHY_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_EEPROM=y -CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3 -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_CMD_DATE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="DPMAC1@xgmii" -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DDR_CLK_FREQ=133333333 -CONFIG_DIMM_SLOTS_PER_CTLR=2 -CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_FSL_DDR_INTLV_256B=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_MAX_OOBFREE=2 -CONFIG_SYS_NAND_MAX_ECCPOS=256 -CONFIG_DM_SPI_FLASH=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_CORTINA=y -CONFIG_CORTINA_FW_ADDR=0x580980000 -CONFIG_FSL_MEMAC=y -CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_RTC_DS3231=y -CONFIG_DM_SCSI=y -CONFIG_CONS_INDEX=2 -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y From patchwork Wed Aug 23 13:25:45 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Laurentiu Tudor X-Patchwork-Id: 1824698 X-Patchwork-Delegate: van.freenix@gmail.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=nxp.com header.i=@nxp.com header.a=rsa-sha256 header.s=selector2 header.b=eajy1mMv; dkim-atps=neutral Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=85.214.62.61; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org) Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (secp384r1) server-digest SHA384) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4RW6SF5qVnz1yNm for ; Wed, 23 Aug 2023 23:26:37 +1000 (AEST) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 53625864BF; Wed, 23 Aug 2023 15:26:19 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=nxp.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (1024-bit key; unprotected) header.d=nxp.com header.i=@nxp.com header.b="eajy1mMv"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 2F7B5864D5; Wed, 23 Aug 2023 15:26:18 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-1.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,FORGED_SPF_HELO,SPF_HELO_PASS, T_SPF_PERMERROR,UPPERCASE_50_75 autolearn=no autolearn_force=no version=3.4.2 Received: from EUR04-DB3-obe.outbound.protection.outlook.com (mail-db3eur04on061f.outbound.protection.outlook.com [IPv6:2a01:111:f400:fe0c::61f]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 8C6B1864BE for ; Wed, 23 Aug 2023 15:26:13 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=nxp.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=laurentiu.tudor@nxp.com ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=GX9AkUJ320to+AJmOErSnFscqYXX/jB48QNjtYrFjTTwlUZYHnVF4t/mW17/FH7MuzqUOJx2Qnx9VZuNO389LwMFq/lXlDZ+pvQ3zDGtqUsFEyr7n/MYrh0GCoTYsCJWiyc7E53vE15DD/w82pjjUkdqjwegOYpqrtCFgKe59giqKkXYsQ7jL8l6t530uONx1KcFPMV+rKUi5cxtBlcFWWATqZqkbPBpzYnK74vE7HSwKJAjBFCMD+e9ylx8NGyTuon1fCPVuzHMnCzzXiAXJhqCJ23jUDwDZzhyTxlVJY0HH+1VXBMZ0MDN8pkFGCgJEGuLp1lW1j7qzF0TubNX1Q== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=8A8qFYiEu75yRc57Ut2QAW2XF759VYl2XyUXd3PGVsY=; b=BcQ41OO0CHcaKXGh1fxmlSiP6Kttmm1kkST5f4AQsp2FvJ390RUnbtZqr24zMfjHRvOu+DVcNb+NPcIGCBlxcNPAL35ZJPQYy/eecZx170pEDAAyAw+veM16GA8sioRnolnF+XbcPLrnbV3x+WJZonDBGGR8BeaHIfWF1/d/raN/6p6nLyhnqqATA9XlJQ0Q9wNEs3jDLHpVU750LMlT6G8hZWJzoFnTh6PtBasq45+rFbV/a//suhFWsRzd+dI4gwWrUKXCNbCZ9OFt78YqY9nSUlwkJ0/tP5xNCBD4orNCJB24HXDy43GBo6LaFC5aJC4LPyYD+pNfD5ImpyHa4Q== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=nxp.com; dmarc=pass action=none header.from=nxp.com; dkim=pass header.d=nxp.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=nxp.com; s=selector2; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=8A8qFYiEu75yRc57Ut2QAW2XF759VYl2XyUXd3PGVsY=; b=eajy1mMvYhRe6q05upmadnGJPhtcJfb4kV2l+uhG+Zq3gBu64MNYXLR6wtoKHXpTCeqMfqOvmTOn4bXCba9xqthqrAjfs4IEqL2cYrCaeTD5fbO3fz4HroIB7qkxRTGGwZWC4UqBZ0BXANQCg0x9iAUc9tOpqged4/ZnAsCqeQw= Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=nxp.com; Received: from AS1PR04MB9382.eurprd04.prod.outlook.com (2603:10a6:20b:4da::15) by DB9PR04MB8252.eurprd04.prod.outlook.com (2603:10a6:10:24d::7) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6699.26; Wed, 23 Aug 2023 13:26:00 +0000 Received: from AS1PR04MB9382.eurprd04.prod.outlook.com ([fe80::efa8:cb35:bebd:3d10]) by AS1PR04MB9382.eurprd04.prod.outlook.com ([fe80::efa8:cb35:bebd:3d10%7]) with mapi id 15.20.6699.026; Wed, 23 Aug 2023 13:26:00 +0000 From: laurentiu.tudor@nxp.com To: rajesh.bhagat@nxp.com, pramod.kumar_1@nxp.com, andy.tang@nxp.com, mingkai.hu@nxp.com, Ashish.Kumar@nxp.com, priyanka.jain@nxp.com, wasim.khan@nxp.com, matt@traverse.com.au, udit.agarwal@nxp.com, joe.hershberger@ni.com, peng.fan@nxp.com, sjg@chromium.org, u-boot@lists.denx.de Cc: michael@walle.cc, camelia.groza@nxp.com, ioana.ciornei@nxp.com, vladimir.oltean@nxp.com, Laurentiu Tudor Subject: [PATCH v3 2/3] configs: layerscape: delete defconfigs using legacy PPA secure FW (part2) Date: Wed, 23 Aug 2023 16:25:45 +0300 Message-Id: <20230823132546.6048-3-laurentiu.tudor@nxp.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20230823132546.6048-1-laurentiu.tudor@nxp.com> References: <20230823132546.6048-1-laurentiu.tudor@nxp.com> X-ClientProxiedBy: AS4P251CA0009.EURP251.PROD.OUTLOOK.COM (2603:10a6:20b:5d2::20) To AS1PR04MB9382.eurprd04.prod.outlook.com (2603:10a6:20b:4da::15) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: AS1PR04MB9382:EE_|DB9PR04MB8252:EE_ X-MS-Office365-Filtering-Correlation-Id: 851638af-60d1-4bd3-6e1d-08dba3dc7dd6 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:AS1PR04MB9382.eurprd04.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230031)(376002)(396003)(136003)(366004)(346002)(39860400002)(1800799009)(186009)(451199024)(83380400001)(30864003)(2906002)(921005)(38100700002)(38350700002)(86362001)(36756003)(6512007)(9686003)(41300700001)(66556008)(66476007)(66946007)(6506007)(6486002)(316002)(52116002)(2616005)(4326008)(8936002)(8676002)(478600001)(6666004)(26005)(1076003)(5660300002)(579004)(559001); DIR:OUT; SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: Dm3BlvTAVSOnpbrX9O7nQ2JCqBq+cyiOM2TZr1UuhIzIIqwT2tRqlh2JfaNyAcxzroD0w0oGPIV0xb57dpCYay9LmlJIICJTzviq5myz/vQpnFSKVvLIeJoOtXcOqsrnlXrDCqUAR1C+sIDDgw8wFG7IqV245o+TJjGuB7Gqf0RuP1WAeioPj9/Ka57ki9a1cQEafzbjqZY81PGacvB4YJhiIxGQtT4QG+1TVwEoM7TMDJscpHEDo7jpzQv7m8OU99Y5i9QnsLI8qcJfIsYFZUiBwF5xvJkU6ldTLWCdGNCMTNjLQsGvi78UzLhn36tDoSYXkySPRUqHkBMwoNsWZBIC9yqSPOQYMKZe/jmZhHZRfbBrlowzK6FXzRp7MfJwn1AvlNEZGMDbD2d1FEGRPwMnEG2XxcErnD+YpMTomjJBXnOkPZw8xCuBMLyhCwnDlxZjv7fWcQt4c4+BMwt9fmkyh/2JdjqAcKS62+8wdSWdIP+ltHkDPOGhogrpZ7V/XDfBpFNjCRkxP5HdYRlV18pgoE0L8H881BVWVXEQsBtetcwlezwubFONiV9tnAEaBEAROVvpKY75DxKIqQ/zWs1gmFGjtKmnXdHl0sJd6oCB/5tbhavk165sBEKVVVvyduHkBAtZUSwOvSB3ZapksHvI9uN8cDCsFfKb9cpTL10iT6GUpcAAEpVRf6/qQrPSPZ9q3ydpFWs58Mm0qzocRKcxgwhqsEvxBXmoyOCaiG6pTOww1L0rplgKuhopkE8SQaipY8m8ZJJagSXlemLNWoKaO8Pu7L7y3IolML2VSSv5ZBxbd2ZEbRtKngux+s14BAKNSXaz/05ECiiVI0xZwuSmbTPDuXCBvXZOf2yNAUKAmZP9Qa8L/Fp0DQ9zNVSGfFPJGf7Cu/OKXF/a4QCXvYIWFFQ1B4FveuZ4WlSrP2BY/bII4SsYQwWzglxJfZpVaFGEQxDcHKf44YHTWUkqDnICtxfjNKbkySr0yFgSg+5MLWaM920Vh92cFGNXNE9P2yXbdeDLP3ePCFKZeyWdLv/mHJjNv2BWMW9S2zTkna8t7CQj46SprHT0r18m8RQAZWx+idce3LpRYsuT5RriRCtFr6vRq50fo24YQZiGbacYytXlvv7icGj7F0Z8O1Ac/4IiGYkdX3fiAL958zocvM2qq+UoJg0Ozy1zmQpt1QYTyXgXfd5LG/X3xBj0XnfG9Y1HoKZSdFRwWBMTLgBcUBfBgNFFbux3ftV8Jvkvci6twnpKMfulPb/PDi3mCVw4Ja10hy12GNq5XUjC9AL32YboWSpUzQ/Pj/rxZr5FTtfghe+QEvMH+x3K35GxaVSTUYl092pDpbkiFIV/FrCv4LK/EFzTeo/zCZo08S/1YVvXtlE5rgxJzYeca+yo8JdfUCtXRbQA0vx3eNmP8fVCEpNc/vmtG4qzQxCVF/cSS7kGUcxbe2MYMc+hnOY1ajsCrQDEbfIifw9si+nsj0NOYyObAil3xyWIz7vasnoneL1VzAUAMKGawwpDlhM7BlqDRv12y/LxuDiHOnH3VBZzRGSe8cUxlq9EUzcJ5dYtGwjZ5ymaPSl3RDFTmr9c2ugx X-OriginatorOrg: nxp.com X-MS-Exchange-CrossTenant-Network-Message-Id: 851638af-60d1-4bd3-6e1d-08dba3dc7dd6 X-MS-Exchange-CrossTenant-AuthSource: AS1PR04MB9382.eurprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 23 Aug 2023 13:26:00.5352 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 686ea1d3-bc2b-4c6f-a92c-d99c5c301635 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: /1STjJmUOziE+/60mIMyyKAUyQnSnbwT0hgcnNJ+iwytMNEqFyUdwWYcxHmM18KrQjwyFiEj/fcqoJUYg/ywvA== X-MS-Exchange-Transport-CrossTenantHeadersStamped: DB9PR04MB8252 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean From: Laurentiu Tudor PPA was a secure firmware developed in-house which is no longer supported and replaced by TF-A quite some years ago. This makes the defconfigs that make use of PPA obsolete, so remove them. Signed-off-by: Laurentiu Tudor --- configs/ls1046aqds_SECURE_BOOT_defconfig | 108 -------------- configs/ls1046aqds_defconfig | 110 -------------- configs/ls1046aqds_lpuart_defconfig | 112 -------------- configs/ls1046aqds_nand_defconfig | 139 ------------------ configs/ls1046aqds_qspi_defconfig | 101 ------------- configs/ls1046aqds_sdcard_ifc_defconfig | 139 ------------------ configs/ls1046aqds_sdcard_qspi_defconfig | 128 ---------------- configs/ls1046ardb_emmc_defconfig | 122 --------------- configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 99 ------------- configs/ls1046ardb_qspi_defconfig | 102 ------------- configs/ls1046ardb_qspi_spl_defconfig | 130 ---------------- .../ls1046ardb_sdcard_SECURE_BOOT_defconfig | 123 ---------------- configs/ls1046ardb_sdcard_defconfig | 122 --------------- configs/ls1088aqds_defconfig | 112 -------------- configs/ls1088aqds_qspi_SECURE_BOOT_defconfig | 107 -------------- configs/ls1088aqds_qspi_defconfig | 108 -------------- configs/ls1088aqds_sdcard_ifc_defconfig | 130 ---------------- configs/ls1088aqds_sdcard_qspi_defconfig | 128 ---------------- configs/ls1088ardb_qspi_SECURE_BOOT_defconfig | 104 ------------- configs/ls1088ardb_qspi_defconfig | 105 ------------- ...1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 124 ---------------- configs/ls1088ardb_sdcard_qspi_defconfig | 124 ---------------- configs/ls2081ardb_defconfig | 96 ------------ configs/ls2088ardb_qspi_SECURE_BOOT_defconfig | 96 ------------ configs/ls2088ardb_qspi_defconfig | 101 ------------- 25 files changed, 2870 deletions(-) delete mode 100644 configs/ls1046aqds_SECURE_BOOT_defconfig delete mode 100644 configs/ls1046aqds_defconfig delete mode 100644 configs/ls1046aqds_lpuart_defconfig delete mode 100644 configs/ls1046aqds_nand_defconfig delete mode 100644 configs/ls1046aqds_qspi_defconfig delete mode 100644 configs/ls1046aqds_sdcard_ifc_defconfig delete mode 100644 configs/ls1046aqds_sdcard_qspi_defconfig delete mode 100644 configs/ls1046ardb_emmc_defconfig delete mode 100644 configs/ls1046ardb_qspi_SECURE_BOOT_defconfig delete mode 100644 configs/ls1046ardb_qspi_defconfig delete mode 100644 configs/ls1046ardb_qspi_spl_defconfig delete mode 100644 configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig delete mode 100644 configs/ls1046ardb_sdcard_defconfig delete mode 100644 configs/ls1088aqds_defconfig delete mode 100644 configs/ls1088aqds_qspi_SECURE_BOOT_defconfig delete mode 100644 configs/ls1088aqds_qspi_defconfig delete mode 100644 configs/ls1088aqds_sdcard_ifc_defconfig delete mode 100644 configs/ls1088aqds_sdcard_qspi_defconfig delete mode 100644 configs/ls1088ardb_qspi_SECURE_BOOT_defconfig delete mode 100644 configs/ls1088ardb_qspi_defconfig delete mode 100644 configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig delete mode 100644 configs/ls1088ardb_sdcard_qspi_defconfig delete mode 100644 configs/ls2081ardb_defconfig delete mode 100644 configs/ls2088ardb_qspi_SECURE_BOOT_defconfig delete mode 100644 configs/ls2088ardb_qspi_defconfig diff --git a/configs/ls1046aqds_SECURE_BOOT_defconfig b/configs/ls1046aqds_SECURE_BOOT_defconfig deleted file mode 100644 index 5bdcc868ba20..000000000000 --- a/configs/ls1046aqds_SECURE_BOOT_defconfig +++ /dev/null @@ -1,108 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1046AQDS=y -CONFIG_TEXT_BASE=0x60100000 -CONFIG_SYS_MALLOC_LEN=0x120000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x20000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart" -CONFIG_FSL_LS_PPA=y -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_NXP_ESBC=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv" -CONFIG_VOL_MONITOR_INA220=y -CONFIG_VOL_MONITOR_IR36021_SET=y -CONFIG_FSL_QIXIS=y -# CONFIG_QIXIS_I2C_ACCESS is not set -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" -CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;;" -CONFIG_MISC_INIT_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_DYNAMIC_DDR_CLK_FREQ=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_FSL_SEC_MON_BE=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SF_DEFAULT_BUS=1 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_E1000=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_PCIE_LAYERSCAPE_EP=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_RSA=y diff --git a/configs/ls1046aqds_defconfig b/configs/ls1046aqds_defconfig deleted file mode 100644 index 51aa5dcbf504..000000000000 --- a/configs/ls1046aqds_defconfig +++ /dev/null @@ -1,110 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1046AQDS=y -CONFIG_TEXT_BASE=0x60100000 -CONFIG_SYS_MALLOC_LEN=0x120000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart" -CONFIG_FSL_LS_PPA=y -CONFIG_ENV_ADDR=0x60300000 -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv" -CONFIG_VOL_MONITOR_INA220=y -CONFIG_VOL_MONITOR_IR36021_SET=y -CONFIG_FSL_QIXIS=y -# CONFIG_QIXIS_I2C_ACCESS is not set -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" -CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;;" -CONFIG_ARCH_MISC_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DYNAMIC_DDR_CLK_FREQ=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SF_DEFAULT_BUS=1 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_E1000=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_PCIE_LAYERSCAPE_EP=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig deleted file mode 100644 index 9c1df2416aa5..000000000000 --- a/configs/ls1046aqds_lpuart_defconfig +++ /dev/null @@ -1,112 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1046AQDS=y -CONFIG_TEXT_BASE=0x60100000 -CONFIG_SYS_MALLOC_LEN=0x120000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-lpuart" -CONFIG_FSL_LS_PPA=y -CONFIG_ENV_ADDR=0x60300000 -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv" -CONFIG_VOL_MONITOR_INA220=y -CONFIG_VOL_MONITOR_IR36021_SET=y -CONFIG_FSL_QIXIS=y -# CONFIG_QIXIS_I2C_ACCESS is not set -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" -CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;;" -CONFIG_ARCH_MISC_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DYNAMIC_DDR_CLK_FREQ=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SF_DEFAULT_BUS=1 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_E1000=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_PCIE_LAYERSCAPE_EP=y -CONFIG_DM_SCSI=y -CONFIG_DM_SERIAL=y -CONFIG_FSL_LPUART=y -CONFIG_LPUART=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig deleted file mode 100644 index 95616f970549..000000000000 --- a/configs/ls1046aqds_nand_defconfig +++ /dev/null @@ -1,139 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1046AQDS=y -CONFIG_TEXT_BASE=0x82000000 -CONFIG_SYS_MALLOC_LEN=0x102000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart" -CONFIG_SPL_TEXT_BASE=0x10000000 -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=655360 -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x1001f000 -CONFIG_SPL=y -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv" -CONFIG_VOL_MONITOR_INA220=y -CONFIG_VOL_MONITOR_IR36021_SET=y -CONFIG_FSL_QIXIS=y -# CONFIG_QIXIS_I2C_ACCESS is not set -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1046aqds/ls1046aqds_pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1046aqds/ls1046aqds_rcw_nand.cfg" -CONFIG_DISTRO_DEFAULTS=y -CONFIG_NAND_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" -CONFIG_BOOTCOMMAND="run distro_bootcmd; run nand_bootcmd; env exists secureboot && esbc_halt;;" -CONFIG_ARCH_MISC_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_SPL_MAX_SIZE=0x17000 -CONFIG_SPL_PAD_TO=0x40000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x8f000000 -CONFIG_SPL_BSS_MAX_SIZE=0x80000 -CONFIG_SPL_FSL_PBL=y -CONFIG_SPL_BOARD_INIT=y -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_SPL_NAND_SUPPORT=y -CONFIG_SPL_WATCHDOG=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DYNAMIC_DDR_CLK_FREQ=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y -CONFIG_SYS_NAND_U_BOOT_OFFS=0x40000 -CONFIG_SF_DEFAULT_BUS=1 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_E1000=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_PCIE_LAYERSCAPE_EP=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig deleted file mode 100644 index f3796f3771f2..000000000000 --- a/configs/ls1046aqds_qspi_defconfig +++ /dev/null @@ -1,101 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1046AQDS=y -CONFIG_TEXT_BASE=0x40100000 -CONFIG_SYS_MALLOC_LEN=0x102000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart" -CONFIG_FSL_LS_PPA=y -CONFIG_ENV_ADDR=0x40300000 -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv" -CONFIG_VOL_MONITOR_INA220=y -CONFIG_VOL_MONITOR_IR36021_SET=y -CONFIG_FSL_QIXIS=y -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_QSPI_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:2m(uboot),14m(free)" -CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;;" -CONFIG_ARCH_MISC_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:2m(uboot),14m(free)" -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DYNAMIC_DDR_CLK_FREQ=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_EARLY_INIT=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_E1000=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_PCIE_LAYERSCAPE_EP=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig deleted file mode 100644 index 179fa70f4ee2..000000000000 --- a/configs/ls1046aqds_sdcard_ifc_defconfig +++ /dev/null @@ -1,139 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1046AQDS=y -CONFIG_TEXT_BASE=0x82000000 -CONFIG_SYS_MALLOC_LEN=0x102000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart" -CONFIG_SPL_TEXT_BASE=0x10000000 -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x10020000 -CONFIG_SPL=y -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv" -CONFIG_VOL_MONITOR_INA220=y -CONFIG_VOL_MONITOR_IR36021_SET=y -CONFIG_FSL_QIXIS=y -# CONFIG_QIXIS_I2C_ACCESS is not set -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1046aqds/ls1046aqds_pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1046aqds/ls1046aqds_rcw_sd_ifc.cfg" -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SD_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" -CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;;" -CONFIG_ARCH_MISC_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_SPL_MAX_SIZE=0x1f000 -CONFIG_SPL_PAD_TO=0x21000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x8f000000 -CONFIG_SPL_BSS_MAX_SIZE=0x80000 -CONFIG_SPL_FSL_PBL=y -CONFIG_SPL_BOARD_INIT=y -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_SPL_WATCHDOG=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)" -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DYNAMIC_DDR_CLK_FREQ=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SF_DEFAULT_BUS=1 -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_E1000=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_PCIE_LAYERSCAPE_EP=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig deleted file mode 100644 index b571eaadf629..000000000000 --- a/configs/ls1046aqds_sdcard_qspi_defconfig +++ /dev/null @@ -1,128 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1046AQDS=y -CONFIG_TEXT_BASE=0x82000000 -CONFIG_SYS_MALLOC_LEN=0x102000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart" -CONFIG_SPL_TEXT_BASE=0x10000000 -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x10020000 -CONFIG_SPL=y -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv" -CONFIG_VOL_MONITOR_INA220=y -CONFIG_VOL_MONITOR_IR36021_SET=y -CONFIG_FSL_QIXIS=y -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1046aqds/ls1046aqds_pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1046aqds/ls1046aqds_rcw_sd_qspi.cfg" -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SD_BOOT=y -CONFIG_SD_BOOT_QSPI=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:2m(uboot),14m(free)" -CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;;" -CONFIG_ARCH_MISC_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_SPL_MAX_SIZE=0x1f000 -CONFIG_SPL_PAD_TO=0x21000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x8f000000 -CONFIG_SPL_BSS_MAX_SIZE=0x80000 -CONFIG_SPL_FSL_PBL=y -CONFIG_SPL_BOARD_INIT=y -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_SPL_WATCHDOG=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:2m(uboot),14m(free)" -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DYNAMIC_DDR_CLK_FREQ=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_EARLY_INIT=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_VITESSE=y -CONFIG_E1000=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_PCIE_LAYERSCAPE_EP=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig deleted file mode 100644 index 924ff78b4593..000000000000 --- a/configs/ls1046ardb_emmc_defconfig +++ /dev/null @@ -1,122 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1046ARDB=y -CONFIG_TEXT_BASE=0x82000000 -CONFIG_SYS_MALLOC_LEN=0x102000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" -CONFIG_SPL_TEXT_BASE=0x10000000 -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x10020000 -CONFIG_SPL=y -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1046ardb/ls1046ardb_pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg" -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SD_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_ARCH_MISC_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_SPL_MAX_SIZE=0x1f000 -CONFIG_SPL_PAD_TO=0x21000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x8f000000 -CONFIG_SPL_BSS_MAX_SIZE=0x80000 -CONFIG_SPL_FSL_PBL=y -CONFIG_SPL_BOARD_INIT=y -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_SPL_WATCHDOG=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_DM=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC3" -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x53 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -# CONFIG_SPI_FLASH_BAR is not set -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_FIXED=y -CONFIG_DM_MDIO=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x900000 -CONFIG_NVME_PCI=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_PCIE_LAYERSCAPE_EP=y -CONFIG_POWER_LEGACY=y -CONFIG_POWER_I2C=y -CONFIG_SYS_QE_FMAN_FW_IN_MMC=y -CONFIG_DM_SCSI=y -CONFIG_DM_SERIAL=y -CONFIG_SPL_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig deleted file mode 100644 index bb278845e069..000000000000 --- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig +++ /dev/null @@ -1,99 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1046ARDB=y -CONFIG_TEXT_BASE=0x40100000 -CONFIG_SYS_MALLOC_LEN=0x102000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" -CONFIG_FSL_LS_PPA=y -CONFIG_QSPI_AHB_INIT=y -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_NXP_ESBC=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1046ardb/ls1046ardb_qspi_pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1046ardb/ls1046ardb_rcw_qspi.cfg" -CONFIG_DISTRO_DEFAULTS=y -CONFIG_QSPI_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" -CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;;" -CONFIG_MISC_INIT_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_DM=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC3" -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_FSL_SEC_MON_BE=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x53 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_SPANSION=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_FIXED=y -CONFIG_DM_MDIO=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x40900000 -CONFIG_NVME_PCI=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_PCIE_LAYERSCAPE_EP=y -CONFIG_POWER_LEGACY=y -CONFIG_POWER_I2C=y -CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y -CONFIG_DM_SCSI=y -CONFIG_SPECIFY_CONSOLE_INDEX=y -CONFIG_DM_SERIAL=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_RSA=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig deleted file mode 100644 index 0fb1a6c281e5..000000000000 --- a/configs/ls1046ardb_qspi_defconfig +++ /dev/null @@ -1,102 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1046ARDB=y -CONFIG_TEXT_BASE=0x40100000 -CONFIG_SYS_MALLOC_LEN=0x102000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_ENV_SECT_SIZE=0x40000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" -CONFIG_FSL_LS_PPA=y -CONFIG_QSPI_AHB_INIT=y -CONFIG_ENV_ADDR=0x40300000 -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1046ardb/ls1046ardb_qspi_pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1046ardb/ls1046ardb_rcw_qspi.cfg" -CONFIG_DISTRO_DEFAULTS=y -CONFIG_QSPI_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" -CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;;" -CONFIG_ARCH_MISC_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_DM=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC3" -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x53 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_SPANSION=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_FIXED=y -CONFIG_DM_MDIO=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x40900000 -CONFIG_NVME_PCI=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_PCIE_LAYERSCAPE_EP=y -CONFIG_POWER_LEGACY=y -CONFIG_POWER_I2C=y -CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y -CONFIG_DM_SCSI=y -CONFIG_SPECIFY_CONSOLE_INDEX=y -CONFIG_DM_SERIAL=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig deleted file mode 100644 index eb0184c59276..000000000000 --- a/configs/ls1046ardb_qspi_spl_defconfig +++ /dev/null @@ -1,130 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1046ARDB=y -CONFIG_TEXT_BASE=0x82000000 -CONFIG_SYS_MALLOC_LEN=0x102000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_ENV_SECT_SIZE=0x40000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" -CONFIG_SPL_TEXT_BASE=0x10000000 -CONFIG_FSL_LS_PPA=y -CONFIG_SPL_FSL_LS_PPA=y -CONFIG_QSPI_AHB_INIT=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x10020000 -CONFIG_SPL=y -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1046ardb/ls1046ardb_qspi_pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1046ardb/ls1046ardb_rcw_qspi.cfg" -CONFIG_DISTRO_DEFAULTS=y -CONFIG_QSPI_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" -CONFIG_BOOTCOMMAND="run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;;" -CONFIG_ARCH_MISC_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_SPL_MAX_SIZE=0x1f000 -CONFIG_SPL_PAD_TO=0x20000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x8f000000 -CONFIG_SPL_BSS_MAX_SIZE=0x80000 -CONFIG_SPL_BOARD_INIT=y -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_SPL_NOR_SUPPORT=y -CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x90000000 -CONFIG_SYS_OS_BASE=0x40980000 -CONFIG_SPL_WATCHDOG=y -CONFIG_SPL_TARGET="spl/u-boot-spl.pbl" -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_SPL=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_DM=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_SPL_ENV_IS_NOWHERE=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC3" -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x53 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -# CONFIG_SPI_FLASH_BAR is not set -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHYLIB=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_FIXED=y -CONFIG_DM_MDIO=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x40900000 -CONFIG_NVME_PCI=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_PCIE_LAYERSCAPE_EP=y -CONFIG_POWER_LEGACY=y -CONFIG_POWER_I2C=y -CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y -CONFIG_DM_SCSI=y -CONFIG_DM_SERIAL=y -CONFIG_SPL_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_SPL_GZIP=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig deleted file mode 100644 index 2813c79f5975..000000000000 --- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig +++ /dev/null @@ -1,123 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1046ARDB=y -CONFIG_TEXT_BASE=0x82000000 -CONFIG_SYS_MALLOC_LEN=0x102000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" -CONFIG_SPL_TEXT_BASE=0x10000000 -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1064960 -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x10020000 -CONFIG_SPL=y -CONFIG_PCI=y -CONFIG_NXP_ESBC=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1046ardb/ls1046ardb_pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg" -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SD_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" -CONFIG_BOOTCOMMAND="run distro_bootcmd;run sd_bootcmd; env exists secureboot && esbc_halt;" -CONFIG_MISC_INIT_R=y -CONFIG_SPL_MAX_SIZE=0x1f000 -CONFIG_SPL_PAD_TO=0x21000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x8f000000 -CONFIG_SPL_BSS_MAX_SIZE=0x80000 -CONFIG_SPL_FSL_PBL=y -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_SPL_WATCHDOG=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_DM=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC3" -CONFIG_SPL_DM=y -# CONFIG_SPL_BLK is not set -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -# CONFIG_SPL_DM_I2C is not set -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_FSL_SEC_MON_BE=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x53 -# CONFIG_SPL_DM_MMC is not set -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -# CONFIG_SPI_FLASH_BAR is not set -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_FIXED=y -CONFIG_DM_MDIO=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x900000 -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_PCIE_LAYERSCAPE_EP=y -CONFIG_POWER_LEGACY=y -CONFIG_POWER_I2C=y -CONFIG_SYS_QE_FMAN_FW_IN_MMC=y -CONFIG_SCSI_AHCI_PLAT=y -CONFIG_SPECIFY_CONSOLE_INDEX=y -CONFIG_DM_SERIAL=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_RSA=y -CONFIG_SPL_RSA=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig deleted file mode 100644 index a621859aa792..000000000000 --- a/configs/ls1046ardb_sdcard_defconfig +++ /dev/null @@ -1,122 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_TARGET_LS1046ARDB=y -CONFIG_TEXT_BASE=0x82000000 -CONFIG_SYS_MALLOC_LEN=0x102000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1000fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y -CONFIG_SYS_I2C_MXC_I2C4=y -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" -CONFIG_SPL_TEXT_BASE=0x10000000 -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x10020000 -CONFIG_SPL=y -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_LAYERSCAPE_NS_ACCESS=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1046ardb/ls1046ardb_pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg" -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SD_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" -CONFIG_BOOTCOMMAND="run distro_bootcmd;run sd_bootcmd; env exists secureboot && esbc_halt;" -CONFIG_ARCH_MISC_INIT=y -CONFIG_MISC_INIT_R=y -CONFIG_SPL_MAX_SIZE=0x1f000 -CONFIG_SPL_PAD_TO=0x21000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x8f000000 -CONFIG_SPL_BSS_MAX_SIZE=0x80000 -CONFIG_SPL_FSL_PBL=y -CONFIG_SPL_BOARD_INIT=y -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_SPL_WATCHDOG=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_DM=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -CONFIG_CMD_CACHE=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)" -# CONFIG_SPL_EFI_PARTITION is not set -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC3" -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x53 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -# CONFIG_SPI_FLASH_BAR is not set -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_FIXED=y -CONFIG_DM_MDIO=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x900000 -CONFIG_NVME_PCI=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_PCIE_LAYERSCAPE_EP=y -CONFIG_POWER_LEGACY=y -CONFIG_POWER_I2C=y -CONFIG_SYS_QE_FMAN_FW_IN_MMC=y -CONFIG_DM_SCSI=y -CONFIG_DM_SERIAL=y -CONFIG_SPL_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls1088aqds_defconfig b/configs/ls1088aqds_defconfig deleted file mode 100644 index f53fbad3d316..000000000000 --- a/configs/ls1088aqds_defconfig +++ /dev/null @@ -1,112 +0,0 @@ -CONFIG_ARM=y -CONFIG_GIC_V3_ITS=y -CONFIG_TARGET_LS1088AQDS=y -CONFIG_TEXT_BASE=0x30100000 -CONFIG_SYS_MALLOC_LEN=0x0220000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" -CONFIG_FSL_LS_PPA=y -CONFIG_ENV_ADDR=0x80300000 -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls1088aqds_vdd_mv" -CONFIG_VOL_MONITOR_LTC3882_READ=y -CONFIG_VOL_MONITOR_LTC3882_SET=y -CONFIG_SYS_FSL_NUM_CC_PLLS=3 -CONFIG_FSL_QIXIS=y -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -# CONFIG_SYS_MALLOC_F is not set -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="fsl_mc lazyapply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load" -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_RESET_PHY_R=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="DPMAC1@xgmii" -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_DYNAMIC_DDR_CLK_FREQ=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_EARLY_INIT=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_ESDHC_DETECT_QUIRK=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_MAX_OOBFREE=2 -CONFIG_SYS_NAND_MAX_ECCPOS=256 -CONFIG_DM_SPI_FLASH=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TERANETICS=y -CONFIG_PHY_VITESSE=y -CONFIG_FSL_MEMAC=y -CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y diff --git a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig deleted file mode 100644 index 921240cd149e..000000000000 --- a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig +++ /dev/null @@ -1,107 +0,0 @@ -CONFIG_ARM=y -CONFIG_GIC_V3_ITS=y -CONFIG_TARGET_LS1088AQDS=y -CONFIG_TEXT_BASE=0x20100000 -CONFIG_SYS_MALLOC_LEN=0x202000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" -CONFIG_FSL_LS_PPA=y -CONFIG_QSPI_AHB_INIT=y -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_NXP_ESBC=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls1088aqds_vdd_mv" -CONFIG_VOL_MONITOR_LTC3882_READ=y -CONFIG_VOL_MONITOR_LTC3882_SET=y -CONFIG_SYS_FSL_NUM_CC_PLLS=3 -CONFIG_FSL_QIXIS=y -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -# CONFIG_SYS_MALLOC_F is not set -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_QSPI_BOOT=y -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -CONFIG_BOOTCOMMAND="sf probe 0:0;sf read 0x80001000 0xd00000 0x100000; fsl_mc lazyapply dpl 0x80001000 && sf read $kernel_load $kernel_start $kernel_size && bootm $kernel_load" -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_RESET_PHY_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="DPMAC1@xgmii" -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_ESDHC_DETECT_QUIRK=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_MAX_OOBFREE=2 -CONFIG_SYS_NAND_MAX_ECCPOS=256 -CONFIG_DM_SPI_FLASH=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TERANETICS=y -CONFIG_PHY_VITESSE=y -CONFIG_FSL_MEMAC=y -CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_GADGET=y -CONFIG_RSA=y -CONFIG_RSA_SOFTWARE_EXP=y diff --git a/configs/ls1088aqds_qspi_defconfig b/configs/ls1088aqds_qspi_defconfig deleted file mode 100644 index 45c93c838198..000000000000 --- a/configs/ls1088aqds_qspi_defconfig +++ /dev/null @@ -1,108 +0,0 @@ -CONFIG_ARM=y -CONFIG_GIC_V3_ITS=y -CONFIG_TARGET_LS1088AQDS=y -CONFIG_TEXT_BASE=0x20100000 -CONFIG_SYS_MALLOC_LEN=0x202000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_ENV_SECT_SIZE=0x40000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" -CONFIG_FSL_LS_PPA=y -CONFIG_QSPI_AHB_INIT=y -CONFIG_ENV_ADDR=0x20300000 -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls1088aqds_vdd_mv" -CONFIG_VOL_MONITOR_LTC3882_READ=y -CONFIG_VOL_MONITOR_LTC3882_SET=y -CONFIG_SYS_FSL_NUM_CC_PLLS=3 -CONFIG_FSL_QIXIS=y -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -# CONFIG_SYS_MALLOC_F is not set -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_QSPI_BOOT=y -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -CONFIG_BOOTCOMMAND="sf probe 0:0;sf read 0x80001000 0xd00000 0x100000; fsl_mc lazyapply dpl 0x80001000 && sf read $kernel_load $kernel_start $kernel_size && bootm $kernel_load" -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_RESET_PHY_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="DPMAC1@xgmii" -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_ESDHC_DETECT_QUIRK=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_MAX_OOBFREE=2 -CONFIG_SYS_NAND_MAX_ECCPOS=256 -CONFIG_DM_SPI_FLASH=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TERANETICS=y -CONFIG_PHY_VITESSE=y -CONFIG_FSL_MEMAC=y -CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_GADGET=y diff --git a/configs/ls1088aqds_sdcard_ifc_defconfig b/configs/ls1088aqds_sdcard_ifc_defconfig deleted file mode 100644 index 1f52769ac216..000000000000 --- a/configs/ls1088aqds_sdcard_ifc_defconfig +++ /dev/null @@ -1,130 +0,0 @@ -CONFIG_ARM=y -CONFIG_GIC_V3_ITS=y -CONFIG_TARGET_LS1088AQDS=y -CONFIG_TEXT_BASE=0x80400000 -CONFIG_SYS_MALLOC_LEN=0x202000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" -CONFIG_SPL_TEXT_BASE=0x1800a000 -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x18009ff0 -CONFIG_SPL=y -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_SPL_VID=y -CONFIG_VID_FLS_ENV="ls1088aqds_vdd_mv" -CONFIG_VOL_MONITOR_LTC3882_READ=y -CONFIG_VOL_MONITOR_LTC3882_SET=y -CONFIG_SYS_FSL_NUM_CC_PLLS=3 -CONFIG_FSL_QIXIS=y -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -# CONFIG_SYS_MALLOC_F is not set -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_SD_BOOT=y -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="mmcinfo;mmc read 0x80001000 0x6800 0x800; fsl_mc lazyapply dpl 0x80001000 && mmc read $kernel_load $kernel_start $kernel_size && bootm $kernel_load" -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_RESET_PHY_R=y -CONFIG_SPL_MAX_SIZE=0x16000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x80100000 -CONFIG_SPL_BSS_MAX_SIZE=0x100000 -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_SPL_TARGET="u-boot-with-spl.bin" -CONFIG_HUSH_PARSER=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="DPMAC1@xgmii" -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_DYNAMIC_DDR_CLK_FREQ=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_EARLY_INIT=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_ESDHC_DETECT_QUIRK=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_MAX_OOBFREE=2 -CONFIG_SYS_NAND_MAX_ECCPOS=256 -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TERANETICS=y -CONFIG_PHY_VITESSE=y -CONFIG_FSL_MEMAC=y -CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y diff --git a/configs/ls1088aqds_sdcard_qspi_defconfig b/configs/ls1088aqds_sdcard_qspi_defconfig deleted file mode 100644 index 93d07829b4b9..000000000000 --- a/configs/ls1088aqds_sdcard_qspi_defconfig +++ /dev/null @@ -1,128 +0,0 @@ -CONFIG_ARM=y -CONFIG_GIC_V3_ITS=y -CONFIG_TARGET_LS1088AQDS=y -CONFIG_TEXT_BASE=0x80400000 -CONFIG_SYS_MALLOC_LEN=0x202000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds" -CONFIG_SPL_TEXT_BASE=0x1800a000 -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x18009ff0 -CONFIG_SPL=y -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_SPL_VID=y -CONFIG_VID_FLS_ENV="ls1088aqds_vdd_mv" -CONFIG_VOL_MONITOR_LTC3882_READ=y -CONFIG_VOL_MONITOR_LTC3882_SET=y -CONFIG_SYS_FSL_NUM_CC_PLLS=3 -CONFIG_FSL_QIXIS=y -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -# CONFIG_SYS_MALLOC_F is not set -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SD_BOOT=y -CONFIG_SD_BOOT_QSPI=y -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -CONFIG_BOOTCOMMAND="mmcinfo;mmc read 0x80001000 0x6800 0x800; fsl_mc lazyapply dpl 0x80001000 && mmc read $kernel_load $kernel_start $kernel_size && bootm $kernel_load" -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_RESET_PHY_R=y -CONFIG_SPL_MAX_SIZE=0x16000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x80100000 -CONFIG_SPL_BSS_MAX_SIZE=0x100000 -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_SPL_TARGET="u-boot-with-spl.bin" -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="DPMAC1@xgmii" -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_ESDHC_DETECT_QUIRK=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_MAX_OOBFREE=2 -CONFIG_SYS_NAND_MAX_ECCPOS=256 -CONFIG_DM_SPI_FLASH=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TERANETICS=y -CONFIG_PHY_VITESSE=y -CONFIG_FSL_MEMAC=y -CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_GADGET=y diff --git a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig deleted file mode 100644 index 48bd56beb3e8..000000000000 --- a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig +++ /dev/null @@ -1,104 +0,0 @@ -CONFIG_ARM=y -CONFIG_GIC_V3_ITS=y -CONFIG_TARGET_LS1088ARDB=y -CONFIG_TEXT_BASE=0x20100000 -CONFIG_SYS_MALLOC_LEN=0x202000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb" -CONFIG_FSL_LS_PPA=y -CONFIG_QSPI_AHB_INIT=y -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_NXP_ESBC=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls1088ardb_vdd_mv" -CONFIG_VOL_MONITOR_LTC3882_READ=y -CONFIG_VOL_MONITOR_LTC3882_SET=y -CONFIG_SYS_FSL_NUM_CC_PLLS=3 -CONFIG_FSL_QIXIS=y -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -# CONFIG_SYS_MALLOC_F is not set -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_QSPI_BOOT=y -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_MISC_INIT_R=y -CONFIG_RESET_PHY_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_DM=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="DPMAC1@xgmii" -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_MXC_I2C1_SPEED=40000000 -CONFIG_SYS_MXC_I2C2_SPEED=40000000 -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_MAX_OOBFREE=2 -CONFIG_SYS_NAND_MAX_ECCPOS=256 -CONFIG_DM_SPI_FLASH=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_SPANSION=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHYLIB=y -CONFIG_PHY_VITESSE=y -CONFIG_FSL_MEMAC=y -CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_NVME_PCI=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_GADGET=y -CONFIG_RSA=y -CONFIG_RSA_SOFTWARE_EXP=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls1088ardb_qspi_defconfig b/configs/ls1088ardb_qspi_defconfig deleted file mode 100644 index 7dcd12db0c83..000000000000 --- a/configs/ls1088ardb_qspi_defconfig +++ /dev/null @@ -1,105 +0,0 @@ -CONFIG_ARM=y -CONFIG_GIC_V3_ITS=y -CONFIG_TARGET_LS1088ARDB=y -CONFIG_TEXT_BASE=0x20100000 -CONFIG_SYS_MALLOC_LEN=0x202000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_ENV_SECT_SIZE=0x40000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb" -CONFIG_FSL_LS_PPA=y -CONFIG_QSPI_AHB_INIT=y -CONFIG_ENV_ADDR=0x20300000 -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls1088ardb_vdd_mv" -CONFIG_VOL_MONITOR_LTC3882_READ=y -CONFIG_VOL_MONITOR_LTC3882_SET=y -CONFIG_SYS_FSL_NUM_CC_PLLS=3 -CONFIG_FSL_QIXIS=y -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -# CONFIG_SYS_MALLOC_F is not set -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_QSPI_BOOT=y -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_MISC_INIT_R=y -CONFIG_RESET_PHY_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_DM=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="DPMAC1@xgmii" -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_MXC_I2C1_SPEED=40000000 -CONFIG_SYS_MXC_I2C2_SPEED=40000000 -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_MAX_OOBFREE=2 -CONFIG_SYS_NAND_MAX_ECCPOS=256 -CONFIG_DM_SPI_FLASH=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_SPANSION=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHYLIB=y -CONFIG_PHY_VITESSE=y -CONFIG_FSL_MEMAC=y -CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_NVME_PCI=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_GADGET=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig deleted file mode 100644 index c0812a983d5c..000000000000 --- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig +++ /dev/null @@ -1,124 +0,0 @@ -CONFIG_ARM=y -CONFIG_GIC_V3_ITS=y -CONFIG_TARGET_LS1088ARDB=y -CONFIG_TEXT_BASE=0x80400000 -CONFIG_SYS_MALLOC_LEN=0x202000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb" -CONFIG_SPL_TEXT_BASE=0x1800a000 -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1064960 -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x18009ff0 -CONFIG_SPL=y -CONFIG_PCI=y -CONFIG_NXP_ESBC=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_SPL_VID=y -CONFIG_VID_FLS_ENV="ls1088ardb_vdd_mv" -CONFIG_VOL_MONITOR_LTC3882_READ=y -CONFIG_VOL_MONITOR_LTC3882_SET=y -CONFIG_SYS_FSL_NUM_CC_PLLS=3 -CONFIG_FSL_QIXIS=y -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -# CONFIG_SYS_MALLOC_F is not set -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SD_BOOT=y -CONFIG_SD_BOOT_QSPI=y -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_MISC_INIT_R=y -CONFIG_RESET_PHY_R=y -CONFIG_SPL_MAX_SIZE=0x16000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x80100000 -CONFIG_SPL_BSS_MAX_SIZE=0x100000 -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_SPL_TARGET="u-boot-with-spl.bin" -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_DM=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="DPMAC1@xgmii" -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SCSI_AHCI=y -# CONFIG_SPL_BLK is not set -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_MXC_I2C1_SPEED=40000000 -CONFIG_SYS_MXC_I2C2_SPEED=40000000 -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -# CONFIG_SPL_DM_MMC is not set -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_MAX_OOBFREE=2 -CONFIG_SYS_NAND_MAX_ECCPOS=256 -CONFIG_DM_SPI_FLASH=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_SPANSION=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHYLIB=y -CONFIG_PHY_VITESSE=y -CONFIG_FSL_MEMAC=y -CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_SCSI_AHCI_PLAT=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_RSA=y -CONFIG_SPL_RSA=y diff --git a/configs/ls1088ardb_sdcard_qspi_defconfig b/configs/ls1088ardb_sdcard_qspi_defconfig deleted file mode 100644 index b98825cdb92a..000000000000 --- a/configs/ls1088ardb_sdcard_qspi_defconfig +++ /dev/null @@ -1,124 +0,0 @@ -CONFIG_ARM=y -CONFIG_GIC_V3_ITS=y -CONFIG_TARGET_LS1088ARDB=y -CONFIG_TEXT_BASE=0x80400000 -CONFIG_SYS_MALLOC_LEN=0x202000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb" -CONFIG_SPL_TEXT_BASE=0x1800a000 -CONFIG_FSL_LS_PPA=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x18009ff0 -CONFIG_SPL=y -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_SPL_VID=y -CONFIG_VID_FLS_ENV="ls1088ardb_vdd_mv" -CONFIG_VOL_MONITOR_LTC3882_READ=y -CONFIG_VOL_MONITOR_LTC3882_SET=y -CONFIG_SYS_FSL_NUM_CC_PLLS=3 -CONFIG_FSL_QIXIS=y -CONFIG_SYS_MEMTEST_START=0x80000000 -CONFIG_SYS_MEMTEST_END=0x9fffffff -# CONFIG_SYS_MALLOC_F is not set -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SD_BOOT=y -CONFIG_SD_BOOT_QSPI=y -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x3000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -# CONFIG_USE_BOOTCOMMAND is not set -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_MISC_INIT_R=y -CONFIG_RESET_PHY_R=y -CONFIG_SPL_MAX_SIZE=0x16000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x80100000 -CONFIG_SPL_BSS_MAX_SIZE=0x100000 -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C=y -CONFIG_SPL_MPC8XXX_INIT_DDR=y -CONFIG_SPL_TARGET="u-boot-with-spl.bin" -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_MEMTEST=y -CONFIG_CMD_DM=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="DPMAC1@xgmii" -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_MXC_I2C1_SPEED=40000000 -CONFIG_SYS_MXC_I2C2_SPEED=40000000 -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_IFC=y -CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_MAX_OOBFREE=2 -CONFIG_SYS_NAND_MAX_ECCPOS=256 -CONFIG_DM_SPI_FLASH=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_SPANSION=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHYLIB=y -CONFIG_PHY_VITESSE=y -CONFIG_FSL_MEMAC=y -CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_NVME_PCI=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_SCSI=y -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_DWC3=y -CONFIG_USB_GADGET=y diff --git a/configs/ls2081ardb_defconfig b/configs/ls2081ardb_defconfig deleted file mode 100644 index 1ee92831bc51..000000000000 --- a/configs/ls2081ardb_defconfig +++ /dev/null @@ -1,96 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_GIC_V3_ITS=y -CONFIG_TARGET_LS2081ARDB=y -CONFIG_TEXT_BASE=0x20100000 -CONFIG_SYS_MALLOC_LEN=0x202000 -CONFIG_NR_DRAM_BANKS=3 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_ENV_SECT_SIZE=0x40000 -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2081a-rdb" -CONFIG_FSL_LS_PPA=y -CONFIG_QSPI_AHB_INIT=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls2080ardb_vdd_mv" -CONFIG_VOL_MONITOR_IR36021_READ=y -CONFIG_VOL_MONITOR_IR36021_SET=y -CONFIG_FSL_QIXIS=y -# CONFIG_SYS_MALLOC_F is not set -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_QSPI_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x806c0000 0x6c0000 0x40000; env exists mcinitcmd && env exists secureboot && esbc_validate 0x806C0000; sf read 0x80d00000 0xd00000 0x100000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x80d00000; run distro_bootcmd;run qspi_bootcmd; env exists secureboot && esbc_halt;" -CONFIG_MISC_INIT_R=y -CONFIG_RESET_PHY_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="DPMAC1@xgmii" -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DDR_CLK_FREQ=133333333 -CONFIG_DIMM_SLOTS_PER_CTLR=2 -CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_FSL_DDR_INTLV_256B=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_EARLY_INIT=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_DM_SPI_FLASH=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_CORTINA=y -CONFIG_CORTINA_FW_ADDR=0x980000 -CONFIG_FSL_MEMAC=y -CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_NVME_PCI=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_RTC_PCF8563=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y -CONFIG_CONS_INDEX=2 -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y diff --git a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig deleted file mode 100644 index 268740c0fff5..000000000000 --- a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig +++ /dev/null @@ -1,96 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_GIC_V3_ITS=y -CONFIG_TARGET_LS2080ARDB=y -CONFIG_TEXT_BASE=0x20100000 -CONFIG_SYS_MALLOC_LEN=0x202000 -CONFIG_NR_DRAM_BANKS=3 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2088a-rdb-qspi" -CONFIG_FSL_LS_PPA=y -CONFIG_QSPI_AHB_INIT=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_NXP_ESBC=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls2080ardb_vdd_mv" -CONFIG_VOL_MONITOR_IR36021_READ=y -CONFIG_VOL_MONITOR_IR36021_SET=y -# CONFIG_SYS_MALLOC_F is not set -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_QSPI_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x806c0000 0x6c0000 0x40000; env exists mcinitcmd && env exists secureboot && esbc_validate 0x806C0000; sf read 0x80d00000 0xd00000 0x100000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x80d00000; run distro_bootcmd;run qspi_bootcmd; env exists secureboot && esbc_halt;" -CONFIG_MISC_INIT_R=y -CONFIG_RESET_PHY_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_DM=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="DPMAC1@xgmii" -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_DDR_CLK_FREQ=133333333 -CONFIG_DIMM_SLOTS_PER_CTLR=2 -CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_FSL_DDR_INTLV_256B=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_EARLY_INIT=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_DM_SPI_FLASH=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_CORTINA=y -CONFIG_CORTINA_FW_ADDR=0x980000 -CONFIG_FSL_MEMAC=y -CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_NVME_PCI=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_RTC_DS3231=y -CONFIG_DM_SCSI=y -CONFIG_CONS_INDEX=2 -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_RSA=y -CONFIG_RSA_SOFTWARE_EXP=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/ls2088ardb_qspi_defconfig b/configs/ls2088ardb_qspi_defconfig deleted file mode 100644 index f38f77b37f4a..000000000000 --- a/configs/ls2088ardb_qspi_defconfig +++ /dev/null @@ -1,101 +0,0 @@ -CONFIG_ARM=y -CONFIG_COUNTER_FREQUENCY=25000000 -CONFIG_GIC_V3_ITS=y -CONFIG_TARGET_LS2080ARDB=y -CONFIG_TEXT_BASE=0x20100000 -CONFIG_SYS_MALLOC_LEN=0x202000 -CONFIG_NR_DRAM_BANKS=3 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800fff0 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x300000 -CONFIG_ENV_SECT_SIZE=0x40000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2088a-rdb-qspi" -CONFIG_FSL_LS_PPA=y -CONFIG_QSPI_AHB_INIT=y -CONFIG_SYS_MONITOR_LEN=1048576 -CONFIG_ENV_ADDR=0x20300000 -CONFIG_PCI=y -CONFIG_AHCI=y -CONFIG_FSL_USE_PCA9547_MUX=y -CONFIG_VID=y -CONFIG_VID_FLS_ENV="ls2080ardb_vdd_mv" -CONFIG_VOL_MONITOR_IR36021_READ=y -CONFIG_VOL_MONITOR_IR36021_SET=y -# CONFIG_SYS_MALLOC_F is not set -CONFIG_REMAKE_ELF=y -CONFIG_MP=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_QSPI_BOOT=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256" -CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x806c0000 0x6c0000 0x40000; env exists mcinitcmd && env exists secureboot && esbc_validate 0x806C0000; sf read 0x80d00000 0xd00000 0x100000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x80d00000; run distro_bootcmd;run qspi_bootcmd; env exists secureboot && esbc_halt;" -CONFIG_MISC_INIT_R=y -CONFIG_RESET_PHY_R=y -CONFIG_SYS_MAXARGS=64 -CONFIG_SYS_PBSIZE=532 -CONFIG_CMD_GREPENV=y -CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 -CONFIG_CMD_DM=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="DPMAC1@xgmii" -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SATA=y -CONFIG_SATA_CEVA=y -CONFIG_FSL_CAAM=y -CONFIG_DDR_CLK_FREQ=133333333 -CONFIG_DIMM_SLOTS_PER_CTLR=2 -CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS=2 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_FSL_DDR_INTLV_256B=y -CONFIG_MPC8XXX_GPIO=y -CONFIG_SYS_I2C_LEGACY=y -CONFIG_SYS_I2C_EARLY_INIT=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_DM_SPI_FLASH=y -# CONFIG_SPI_FLASH_BAR is not set -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHYLIB=y -CONFIG_PHY_AQUANTIA=y -CONFIG_PHY_CORTINA=y -CONFIG_CORTINA_FW_ADDR=0x980000 -CONFIG_FSL_MEMAC=y -CONFIG_SYS_MEMAC_LITTLE_ENDIAN=y -CONFIG_E1000=y -CONFIG_MII=y -CONFIG_NVME_PCI=y -CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_RTC_DS3231=y -CONFIG_DM_SCSI=y -CONFIG_CONS_INDEX=2 -CONFIG_SYS_NS16550_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_DSPI=y -CONFIG_FSL_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y From patchwork Wed Aug 23 13:25:46 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Laurentiu Tudor X-Patchwork-Id: 1824696 X-Patchwork-Delegate: van.freenix@gmail.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=nxp.com header.i=@nxp.com header.a=rsa-sha256 header.s=selector2 header.b=eYGhvS6u; dkim-atps=neutral Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org) Received: from phobos.denx.de (phobos.denx.de [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (secp384r1) server-digest SHA384) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4RW6Rn675zz1yNm for ; Wed, 23 Aug 2023 23:26:13 +1000 (AEST) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 9AA01864C4; Wed, 23 Aug 2023 15:26:07 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=nxp.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (1024-bit key; unprotected) header.d=nxp.com header.i=@nxp.com header.b="eYGhvS6u"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id BEE9F864B3; Wed, 23 Aug 2023 15:26:06 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-1.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,FORGED_SPF_HELO,SPF_HELO_PASS, T_SPF_PERMERROR autolearn=no autolearn_force=no version=3.4.2 Received: from EUR04-DB3-obe.outbound.protection.outlook.com (mail-db3eur04on0607.outbound.protection.outlook.com [IPv6:2a01:111:f400:fe0c::607]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 37E06864BA for ; Wed, 23 Aug 2023 15:26:04 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=nxp.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=laurentiu.tudor@nxp.com ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=lueVEdj09GHALfgTKeL4qVRYi2mShpDqaHE21kU5X4LyzaEHurz6P3eJuOftk9X5WFk5A0vSK9qZB+lie8xzQXM6Ve3ZWvXLjR+Vtsjzi5VQKFeJlV3jUbL6PJLq+y3+SD5aNFznAn5FnZguXRTBE6kSOqfTIjLqWZrKZ2FcGA16ymPs4L24mvINWqw6s7AIXYZ38IUtCyP5ng99o+btW6WrZ6HjhjDV4//jUYgZShbn0Jm24D36+NXSHXhpfOGRxj1bWeocy4tHNDqQ4Bm0qHazF+D6w0j6WHmaL6CNqkbCr+KdBf07NYfjnHD3lCoCo50/F490c77QAY03UIY+WA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=KdoNT5r82NDxEeO8/EU5Faybd05ECELsNCYSKLCy2TI=; b=c580INHg/H6fxOZVMSRe9zXW4amf3T4Zwry+5rNgjNySODfr78/VTQ6lXfyEAJDhiPnssey8+1swa1NxpApLLVabuAbxIRKyca7TJ4W3u623R+7ajexsoNjjw9BJreRdOArEmU8P57Irt/VujBvlK1tfB2bnsXcafk/WpGOcfuJIv/2+ThWR4jSPVkppdSzT2Rc03+NMpfhIQLerYEjeUktN+Cpt8+Tdss3G51Mb+yYC7Z4W9XFULJiqweZEL/RjTSwri16zjJQDCYx9sV8IYcSngoLfHum6gGQVchTPRvf/oJIDGFsrodQcncubJ+9HdpQQFuWtxORZMz+6fs5Leg== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=nxp.com; dmarc=pass action=none header.from=nxp.com; dkim=pass header.d=nxp.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=nxp.com; s=selector2; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=KdoNT5r82NDxEeO8/EU5Faybd05ECELsNCYSKLCy2TI=; b=eYGhvS6ufFpIfPdzqoVM0zcAiiipbwK3fURDKbZKOxMFcuzEkPHixqoCNap5CxlT00uGACWq4owlV6iPQEIiIIofRBURCIDw9xkfb5zIB+e53++UmE3uMPP8PkDsTbwXDiujwilI3Vms5HlQlk5WSTnC8nHBeA48zp6GTXLYzVo= Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=nxp.com; Received: from AS1PR04MB9382.eurprd04.prod.outlook.com (2603:10a6:20b:4da::15) by DB9PR04MB8252.eurprd04.prod.outlook.com (2603:10a6:10:24d::7) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6699.26; Wed, 23 Aug 2023 13:26:01 +0000 Received: from AS1PR04MB9382.eurprd04.prod.outlook.com ([fe80::efa8:cb35:bebd:3d10]) by AS1PR04MB9382.eurprd04.prod.outlook.com ([fe80::efa8:cb35:bebd:3d10%7]) with mapi id 15.20.6699.026; Wed, 23 Aug 2023 13:26:01 +0000 From: laurentiu.tudor@nxp.com To: rajesh.bhagat@nxp.com, pramod.kumar_1@nxp.com, andy.tang@nxp.com, mingkai.hu@nxp.com, Ashish.Kumar@nxp.com, priyanka.jain@nxp.com, wasim.khan@nxp.com, matt@traverse.com.au, udit.agarwal@nxp.com, joe.hershberger@ni.com, peng.fan@nxp.com, sjg@chromium.org, u-boot@lists.denx.de Cc: michael@walle.cc, camelia.groza@nxp.com, ioana.ciornei@nxp.com, vladimir.oltean@nxp.com, Laurentiu Tudor Subject: [PATCH v3 3/3] fsl-layerscape: drop obsolete PPA secure firmware support Date: Wed, 23 Aug 2023 16:25:46 +0300 Message-Id: <20230823132546.6048-4-laurentiu.tudor@nxp.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20230823132546.6048-1-laurentiu.tudor@nxp.com> References: <20230823132546.6048-1-laurentiu.tudor@nxp.com> X-ClientProxiedBy: AS4P251CA0009.EURP251.PROD.OUTLOOK.COM (2603:10a6:20b:5d2::20) To AS1PR04MB9382.eurprd04.prod.outlook.com (2603:10a6:20b:4da::15) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: AS1PR04MB9382:EE_|DB9PR04MB8252:EE_ X-MS-Office365-Filtering-Correlation-Id: 3787e1a0-0066-44bc-0c06-08dba3dc7ea1 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:AS1PR04MB9382.eurprd04.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230031)(376002)(396003)(136003)(366004)(346002)(39860400002)(1800799009)(186009)(451199024)(83380400001)(30864003)(2906002)(921005)(38100700002)(38350700002)(86362001)(36756003)(6512007)(9686003)(41300700001)(66556008)(66476007)(66946007)(6506007)(6486002)(316002)(52116002)(2616005)(4326008)(8936002)(8676002)(478600001)(6666004)(26005)(1076003)(5660300002)(21314003); DIR:OUT; SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: nxp.com X-MS-Exchange-CrossTenant-Network-Message-Id: 3787e1a0-0066-44bc-0c06-08dba3dc7ea1 X-MS-Exchange-CrossTenant-AuthSource: AS1PR04MB9382.eurprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 23 Aug 2023 13:26:01.7127 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 686ea1d3-bc2b-4c6f-a92c-d99c5c301635 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: 3YDEpcEyNHDneHxtyXPBVDtdKwJOJCIsGo3DU2EZlxwmxdKDyFBiTQ/oqJdSCyBrco0WAATEBNXyQTD+Z8qo2g== X-MS-Exchange-Transport-CrossTenantHeadersStamped: DB9PR04MB8252 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean From: Laurentiu Tudor PPA was a secure firmware developed in-house which is no longer supported and replaced by TF-A quite some years ago. Drop support for it. Signed-off-by: Laurentiu Tudor --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 60 ---- arch/arm/cpu/armv8/fsl-layerscape/Makefile | 1 - arch/arm/cpu/armv8/fsl-layerscape/ppa.c | 284 ------------------ arch/arm/cpu/armv8/fsl-layerscape/spl.c | 34 --- .../arm/include/asm/arch-fsl-layerscape/ppa.h | 12 - arch/arm/include/asm/fsl_secure_boot.h | 9 - board/freescale/ls1012afrdm/Kconfig | 11 - board/freescale/ls1012afrdm/ls1012afrdm.c | 6 - board/freescale/ls1012aqds/Kconfig | 8 - board/freescale/ls1012aqds/ls1012aqds.c | 6 - board/freescale/ls1012ardb/Kconfig | 12 - board/freescale/ls1012ardb/ls1012ardb.c | 6 - board/freescale/ls1028a/Kconfig | 12 - board/freescale/ls1028a/ls1028a.c | 7 - board/freescale/ls1043aqds/Kconfig | 16 - board/freescale/ls1043aqds/ls1043aqds.c | 5 - board/freescale/ls1043ardb/Kconfig | 14 - board/freescale/ls1043ardb/ls1043ardb.c | 5 - board/freescale/ls1046aqds/Kconfig | 16 - board/freescale/ls1046aqds/ls1046aqds.c | 5 - board/freescale/ls1046ardb/Kconfig | 14 - board/freescale/ls1046ardb/ls1046ardb.c | 5 - board/freescale/ls1088a/Kconfig | 28 -- board/freescale/ls1088a/ls1088a.c | 5 - board/freescale/ls2080aqds/Kconfig | 16 - board/freescale/ls2080aqds/ls2080aqds.c | 5 - board/freescale/ls2080ardb/Kconfig | 16 - board/freescale/ls2080ardb/ls2080ardb.c | 5 - board/traverse/ten64/ten64.c | 1 - env/Kconfig | 2 +- include/configs/ls1046a_common.h | 3 +- 31 files changed, 2 insertions(+), 627 deletions(-) delete mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ppa.c delete mode 100644 arch/arm/include/asm/arch-fsl-layerscape/ppa.h diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index a8b493e2f875..c45e4e63b4bb 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -390,66 +390,6 @@ config HAS_FEATURE_ENHANCED_MSI bool default y if ARCH_LS1043A -menu "Layerscape PPA" -config FSL_LS_PPA - bool "FSL Layerscape PPA firmware support" - depends on !ARMV8_PSCI - select ARMV8_SEC_FIRMWARE_SUPPORT - select SEC_FIRMWARE_ARMV8_PSCI - select ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT if FSL_LSCH2 - help - The FSL Primary Protected Application (PPA) is a software component - which is loaded during boot stage, and then remains resident in RAM - and runs in the TrustZone after boot. - Say y to enable it. - -config SPL_FSL_LS_PPA - bool "FSL Layerscape PPA firmware support for SPL build" - depends on !ARMV8_PSCI - select SPL_ARMV8_SEC_FIRMWARE_SUPPORT - select SEC_FIRMWARE_ARMV8_PSCI - select ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT if FSL_LSCH2 - help - The FSL Primary Protected Application (PPA) is a software component - which is loaded during boot stage, and then remains resident in RAM - and runs in the TrustZone after boot. This is to load PPA during SPL - stage instead of the RAM version of U-Boot. Once PPA is initialized, - the rest of U-Boot (including RAM version) runs at EL2. -choice - prompt "FSL Layerscape PPA firmware loading-media select" - depends on FSL_LS_PPA - default SYS_LS_PPA_FW_IN_MMC if SD_BOOT - default SYS_LS_PPA_FW_IN_NAND if NAND_BOOT - default SYS_LS_PPA_FW_IN_XIP - -config SYS_LS_PPA_FW_IN_XIP - bool "XIP" - help - Say Y here if the PPA firmware locate at XIP flash, such - as NOR or QSPI flash. - -config SYS_LS_PPA_FW_IN_MMC - bool "eMMC or SD Card" - help - Say Y here if the PPA firmware locate at eMMC/SD card. - -config SYS_LS_PPA_FW_IN_NAND - bool "NAND" - help - Say Y here if the PPA firmware locate at NAND flash. - -endchoice - -config LS_PPA_ESBC_HDR_SIZE - hex "Length of PPA ESBC header" - depends on FSL_LS_PPA && CHAIN_OF_TRUST && !SYS_LS_PPA_FW_IN_XIP - default 0x2000 - help - Length (in bytes) of PPA ESBC header to be copied from MMC/SD or - NAND to memory to validate PPA image. - -endmenu - config SYS_FSL_ERRATUM_A008997 bool "Workaround for USB PHY erratum A008997" diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile index 598c36ee660a..eefdf12369c3 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile +++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile @@ -10,7 +10,6 @@ obj-$(CONFIG_MP) += mp.o spintable.o obj-$(CONFIG_OF_LIBFDT) += fdt.o endif obj-$(CONFIG_SPL) += spl.o -obj-$(CONFIG_$(SPL_)FSL_LS_PPA) += ppa.o ifneq ($(CONFIG_FSL_LSCH3),) obj-y += fsl_lsch3_speed.o diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c deleted file mode 100644 index 117b7a053c51..000000000000 --- a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c +++ /dev/null @@ -1,284 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2016 NXP Semiconductor, Inc. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_FSL_LSCH3 -#include -#elif defined(CONFIG_FSL_LSCH2) -#include -#endif -#if CONFIG_IS_ENABLED(ARMV8_SEC_FIRMWARE_SUPPORT) -#include -#endif -#ifdef CONFIG_CHAIN_OF_TRUST -#include -#endif - -#ifdef CONFIG_SYS_LS_PPA_FW_IN_NAND -#include -#elif defined(CONFIG_SYS_LS_PPA_FW_IN_MMC) -#include -#endif - -DECLARE_GLOBAL_DATA_PTR; - -int ppa_init(void) -{ - unsigned int el = current_el(); - void *ppa_fit_addr; - u32 *boot_loc_ptr_l, *boot_loc_ptr_h; - u32 *loadable_l, *loadable_h; - int ret; - -#ifdef CONFIG_CHAIN_OF_TRUST - uintptr_t ppa_esbc_hdr = 0; - uintptr_t ppa_img_addr = 0; -#if defined(CONFIG_SYS_LS_PPA_FW_IN_MMC) || \ - defined(CONFIG_SYS_LS_PPA_FW_IN_NAND) - void *ppa_hdr_ddr; -#endif -#endif - - /* Skip if running at lower exception level */ - if (el < 3) { - debug("Skipping PPA init, running at EL%d\n", el); - return 0; - } - -#ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP - ppa_fit_addr = (void *)CONFIG_SYS_LS_PPA_FW_ADDR; - debug("%s: PPA image load from XIP\n", __func__); -#ifdef CONFIG_CHAIN_OF_TRUST - ppa_esbc_hdr = CONFIG_SYS_LS_PPA_ESBC_ADDR; -#endif -#else /* !CONFIG_SYS_LS_PPA_FW_IN_XIP */ - size_t fw_length, fdt_header_len = sizeof(struct fdt_header); - - /* Copy PPA image from MMC/SD/NAND to allocated memory */ -#ifdef CONFIG_SYS_LS_PPA_FW_IN_MMC - struct mmc *mmc; - int dev = CONFIG_SYS_MMC_ENV_DEV; - struct fdt_header *fitp; - u32 cnt; - u32 blk; - - debug("%s: PPA image load from eMMC/SD\n", __func__); - - ret = mmc_initialize(gd->bd); - if (ret) { - printf("%s: mmc_initialize() failed\n", __func__); - return ret; - } - mmc = find_mmc_device(dev); - if (!mmc) { - printf("PPA: MMC cannot find device for PPA firmware\n"); - return -ENODEV; - } - - ret = mmc_init(mmc); - if (ret) { - printf("%s: mmc_init() failed\n", __func__); - return ret; - } - - fitp = malloc(roundup(fdt_header_len, 512)); - if (!fitp) { - printf("PPA: malloc failed for FIT header(size 0x%zx)\n", - roundup(fdt_header_len, 512)); - return -ENOMEM; - } - - blk = CONFIG_SYS_LS_PPA_FW_ADDR / 512; - cnt = DIV_ROUND_UP(fdt_header_len, 512); - debug("%s: MMC read PPA FIT header: dev # %u, block # %u, count %u\n", - __func__, dev, blk, cnt); - ret = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, fitp); - if (ret != cnt) { - free(fitp); - printf("MMC/SD read of PPA FIT header at offset 0x%x failed\n", - CONFIG_SYS_LS_PPA_FW_ADDR); - return -EIO; - } - - ret = fdt_check_header(fitp); - if (ret) { - free(fitp); - printf("%s: fdt_check_header() failed\n", __func__); - return ret; - } - -#ifdef CONFIG_CHAIN_OF_TRUST - ppa_hdr_ddr = malloc(CONFIG_LS_PPA_ESBC_HDR_SIZE); - if (!ppa_hdr_ddr) { - printf("PPA: malloc failed for PPA header\n"); - return -ENOMEM; - } - - blk = CONFIG_SYS_LS_PPA_ESBC_ADDR >> 9; - cnt = DIV_ROUND_UP(CONFIG_LS_PPA_ESBC_HDR_SIZE, 512); - ret = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, ppa_hdr_ddr); - if (ret != cnt) { - free(ppa_hdr_ddr); - printf("MMC/SD read of PPA header failed\n"); - return -EIO; - } - debug("Read PPA header to 0x%p\n", ppa_hdr_ddr); - - ppa_esbc_hdr = (uintptr_t)ppa_hdr_ddr; -#endif - - fw_length = fdt_totalsize(fitp); - free(fitp); - - fw_length = roundup(fw_length, 512); - ppa_fit_addr = malloc(fw_length); - if (!ppa_fit_addr) { - printf("PPA: malloc failed for PPA image(size 0x%zx)\n", - fw_length); - return -ENOMEM; - } - - blk = CONFIG_SYS_LS_PPA_FW_ADDR / 512; - cnt = DIV_ROUND_UP(fw_length, 512); - debug("%s: MMC read PPA FIT image: dev # %u, block # %u, count %u\n", - __func__, dev, blk, cnt); - ret = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, ppa_fit_addr); - if (ret != cnt) { - free(ppa_fit_addr); - printf("MMC/SD read of PPA FIT header at offset 0x%x failed\n", - CONFIG_SYS_LS_PPA_FW_ADDR); - return -EIO; - } - -#elif defined(CONFIG_SYS_LS_PPA_FW_IN_NAND) - struct fdt_header fit; - - debug("%s: PPA image load from NAND\n", __func__); - - nand_init(); - ret = nand_read(get_nand_dev_by_index(0), - (loff_t)CONFIG_SYS_LS_PPA_FW_ADDR, - &fdt_header_len, (u_char *)&fit); - if (ret == -EUCLEAN) { - printf("NAND read of PPA FIT header at offset 0x%x failed\n", - CONFIG_SYS_LS_PPA_FW_ADDR); - return -EIO; - } - - ret = fdt_check_header(&fit); - if (ret) { - printf("%s: fdt_check_header() failed\n", __func__); - return ret; - } - -#ifdef CONFIG_CHAIN_OF_TRUST - ppa_hdr_ddr = malloc(CONFIG_LS_PPA_ESBC_HDR_SIZE); - if (!ppa_hdr_ddr) { - printf("PPA: malloc failed for PPA header\n"); - return -ENOMEM; - } - - fw_length = CONFIG_LS_PPA_ESBC_HDR_SIZE; - - ret = nand_read(get_nand_dev_by_index(0), - (loff_t)CONFIG_SYS_LS_PPA_ESBC_ADDR, - &fw_length, (u_char *)ppa_hdr_ddr); - if (ret == -EUCLEAN) { - free(ppa_hdr_ddr); - printf("NAND read of PPA firmware at offset 0x%x failed\n", - CONFIG_SYS_LS_PPA_FW_ADDR); - return -EIO; - } - debug("Read PPA header to 0x%p\n", ppa_hdr_ddr); - - ppa_esbc_hdr = (uintptr_t)ppa_hdr_ddr; -#endif - - fw_length = fdt_totalsize(&fit); - - ppa_fit_addr = malloc(fw_length); - if (!ppa_fit_addr) { - printf("PPA: malloc failed for PPA image(size 0x%zx)\n", - fw_length); - return -ENOMEM; - } - - ret = nand_read(get_nand_dev_by_index(0), - (loff_t)CONFIG_SYS_LS_PPA_FW_ADDR, - &fw_length, (u_char *)ppa_fit_addr); - if (ret == -EUCLEAN) { - free(ppa_fit_addr); - printf("NAND read of PPA firmware at offset 0x%x failed\n", - CONFIG_SYS_LS_PPA_FW_ADDR); - return -EIO; - } -#else -#error "No CONFIG_SYS_LS_PPA_FW_IN_xxx defined" -#endif - -#endif - -#ifdef CONFIG_CHAIN_OF_TRUST - ppa_img_addr = (uintptr_t)ppa_fit_addr; - if (fsl_check_boot_mode_secure() != 0) { - /* - * In case of failure in validation, fsl_secboot_validate - * would not return back in case of Production environment - * with ITS=1. In Development environment (ITS=0 and - * SB_EN=1), the function may return back in case of - * non-fatal failures. - */ - ret = fsl_secboot_validate(ppa_esbc_hdr, - PPA_KEY_HASH, - &ppa_img_addr); - if (ret != 0) - printf("SEC firmware(s) validation failed\n"); - else - printf("SEC firmware(s) validation Successful\n"); - } -#if defined(CONFIG_SYS_LS_PPA_FW_IN_MMC) || \ - defined(CONFIG_SYS_LS_PPA_FW_IN_NAND) - free(ppa_hdr_ddr); -#endif -#endif - -#ifdef CONFIG_FSL_LSCH3 - struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR); - boot_loc_ptr_l = &gur->bootlocptrl; - boot_loc_ptr_h = &gur->bootlocptrh; - - /* Assign addresses to loadable ptrs */ - loadable_l = &gur->scratchrw[4]; - loadable_h = &gur->scratchrw[5]; -#elif defined(CONFIG_FSL_LSCH2) - struct ccsr_scfg __iomem *scfg = (void *)(CFG_SYS_FSL_SCFG_ADDR); - boot_loc_ptr_l = &scfg->scratchrw[1]; - boot_loc_ptr_h = &scfg->scratchrw[0]; - - /* Assign addresses to loadable ptrs */ - loadable_l = &scfg->scratchrw[2]; - loadable_h = &scfg->scratchrw[3]; -#endif - - debug("fsl-ppa: boot_loc_ptr_l = 0x%p, boot_loc_ptr_h =0x%p\n", - boot_loc_ptr_l, boot_loc_ptr_h); - ret = sec_firmware_init(ppa_fit_addr, boot_loc_ptr_l, boot_loc_ptr_h, - loadable_l, loadable_h); - -#if defined(CONFIG_SYS_LS_PPA_FW_IN_MMC) || \ - defined(CONFIG_SYS_LS_PPA_FW_IN_NAND) - free(ppa_fit_addr); -#endif - - return ret; -} diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c index 61fced451eb5..94aa5eeeea44 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c @@ -21,7 +21,6 @@ #include #include #include -#include #include DECLARE_GLOBAL_DATA_PTR; @@ -62,9 +61,6 @@ void spl_board_init(void) #ifdef CONFIG_LAYERSCAPE_NS_ACCESS enable_layerscape_ns_access(); #endif -#ifdef CONFIG_SPL_FSL_LS_PPA - ppa_init(); -#endif } void tzpc_init(void) @@ -115,36 +111,6 @@ void board_init_f(ulong dummy) init_func_vid(); #endif dram_init(); -#ifdef CONFIG_SPL_FSL_LS_PPA -#ifndef CFG_SYS_MEM_RESERVE_SECURE -#error Need secure RAM for PPA -#endif - /* - * Secure memory location is determined in dram_init_banksize(). - * gd->ram_size is deducted by the size of secure ram. - */ - dram_init_banksize(); - - /* - * After dram_init_bank_size(), we know U-Boot only uses the first - * memory bank regardless how big the memory is. - */ - gd->ram_top = gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size; - - /* - * If PPA is loaded, U-Boot will resume running at EL2. - * Cache and MMU will be enabled. Need a place for TLB. - * U-Boot will be relocated to the end of available memory - * in first bank. At this point, we cannot know how much - * memory U-Boot uses. Put TLB table lower by SPL_TLB_SETBACK - * to avoid overlapping. As soon as the RAM version U-Boot sets - * up new MMU, this space is no longer needed. - */ - gd->ram_top -= SPL_TLB_SETBACK; - gd->arch.tlb_size = PGTABLE_SIZE; - gd->arch.tlb_addr = (gd->ram_top - gd->arch.tlb_size) & ~(0x10000 - 1); - gd->arch.tlb_allocated = gd->arch.tlb_addr; -#endif /* CONFIG_SPL_FSL_LS_PPA */ #if defined(CONFIG_QSPI_AHB_INIT) && defined(CONFIG_QSPI_BOOT) qspi_ahb_init(); #endif diff --git a/arch/arm/include/asm/arch-fsl-layerscape/ppa.h b/arch/arm/include/asm/arch-fsl-layerscape/ppa.h deleted file mode 100644 index f0c4a84f7ca4..000000000000 --- a/arch/arm/include/asm/arch-fsl-layerscape/ppa.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2016 NXP Semiconductor, Inc. - */ - -#ifndef __FSL_PPA_H_ -#define __FSL_PPA_H_ - -#ifdef CONFIG_FSL_LS_PPA -int ppa_init(void); -#endif -#endif diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index 6a9d198cb811..15627c96e906 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -9,15 +9,6 @@ #ifdef CONFIG_CHAIN_OF_TRUST #ifndef CONFIG_SPL_BUILD -#ifdef CONFIG_FSL_LS_PPA -/* Define the key hash here if SRK used for signing PPA image is - * different from SRK hash put in SFP used for U-Boot. - * Example - * #define PPA_KEY_HASH \ - * "41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b" - */ -#define PPA_KEY_HASH NULL -#endif /* ifdef CONFIG_FSL_LS_PPA */ #endif /* #ifndef CONFIG_SPL_BUILD */ #endif /* #ifdef CONFIG_CHAIN_OF_TRUST */ diff --git a/board/freescale/ls1012afrdm/Kconfig b/board/freescale/ls1012afrdm/Kconfig index 75de782afc9c..a7e59e626565 100644 --- a/board/freescale/ls1012afrdm/Kconfig +++ b/board/freescale/ls1012afrdm/Kconfig @@ -20,9 +20,6 @@ config SYS_LS_PFE_FW_LENGTH hex "length of PFE firmware" default 0x40000 -config SYS_LS_PPA_FW_ADDR - hex "PPA Firmware Addr" - default 0x40400000 endif if FSL_PFE @@ -73,14 +70,6 @@ config SYS_LS_PFE_FW_LENGTH hex "length of PFE firmware" default 0x40000 -config SYS_LS_PPA_FW_ADDR - hex "PPA Firmware Addr" - default 0x40060000 - -config SYS_LS_PPA_ESBC_ADDR - hex "PPA Firmware HDR Addr" - default 0x401f4000 - config SYS_LS_PFE_ESBC_ADDR hex "PFE Firmware HDR Addr" default 0x401f8000 diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c b/board/freescale/ls1012afrdm/ls1012afrdm.c index f2b8750a3f38..271072bf7a1c 100644 --- a/board/freescale/ls1012afrdm/ls1012afrdm.c +++ b/board/freescale/ls1012afrdm/ls1012afrdm.c @@ -12,9 +12,6 @@ #include #include #include -#ifdef CONFIG_FSL_LS_PPA -#include -#endif #include #include #include @@ -171,9 +168,6 @@ int board_init(void) if (current_el() == 3) out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER); -#ifdef CONFIG_FSL_LS_PPA - ppa_init(); -#endif return 0; } diff --git a/board/freescale/ls1012aqds/Kconfig b/board/freescale/ls1012aqds/Kconfig index 991ba6044db8..d333069898fb 100644 --- a/board/freescale/ls1012aqds/Kconfig +++ b/board/freescale/ls1012aqds/Kconfig @@ -12,15 +12,7 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1012aqds" -config SYS_LS_PPA_FW_ADDR - hex "PPA Firmware Addr" - default 0x40400000 - if CHAIN_OF_TRUST -config SYS_LS_PPA_ESBC_ADDR - hex "PPA Firmware HDR Addr" - default 0x40680000 - config SYS_LS_PFE_ESBC_ADDR hex "PFE Firmware HDR Addr" default 0x40700000 diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c index 194b5d27295b..a5ea8d634edc 100644 --- a/board/freescale/ls1012aqds/ls1012aqds.c +++ b/board/freescale/ls1012aqds/ls1012aqds.c @@ -13,9 +13,6 @@ #include #include #include -#ifdef CONFIG_FSL_LS_PPA -#include -#endif #include #include #include @@ -150,9 +147,6 @@ int board_init(void) erratum_a010315(); #endif -#ifdef CONFIG_FSL_LS_PPA - ppa_init(); -#endif return 0; } diff --git a/board/freescale/ls1012ardb/Kconfig b/board/freescale/ls1012ardb/Kconfig index aa15f5a027e8..b55660d485fa 100644 --- a/board/freescale/ls1012ardb/Kconfig +++ b/board/freescale/ls1012ardb/Kconfig @@ -12,15 +12,7 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1012ardb" -config SYS_LS_PPA_FW_ADDR - hex "PPA Firmware Addr" - default 0x40400000 - if CHAIN_OF_TRUST -config SYS_LS_PPA_ESBC_ADDR - hex "PPA Firmware HDR Addr" - default 0x40680000 - config SYS_LS_PFE_ESBC_ADDR hex "PFE Firmware HDR Addr" default 0x40640000 @@ -79,10 +71,6 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1012a2g5rdb" -config SYS_LS_PPA_FW_ADDR - hex "PPA Firmware Addr" - default 0x40400000 - if FSL_PFE config BOARD_SPECIFIC_OPTIONS # dummy diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c index 62c935e4d3ec..18f92089caef 100644 --- a/board/freescale/ls1012ardb/ls1012ardb.c +++ b/board/freescale/ls1012ardb/ls1012ardb.c @@ -15,9 +15,6 @@ #include #include #include -#ifdef CONFIG_FSL_LS_PPA -#include -#endif #include #include #include @@ -173,9 +170,6 @@ int board_init(void) erratum_a010315(); #endif -#ifdef CONFIG_FSL_LS_PPA - ppa_init(); -#endif return 0; } diff --git a/board/freescale/ls1028a/Kconfig b/board/freescale/ls1028a/Kconfig index 7d73d20c8f0e..fb6ee17ce897 100644 --- a/board/freescale/ls1028a/Kconfig +++ b/board/freescale/ls1028a/Kconfig @@ -20,18 +20,6 @@ config TEXT_BASE default 0x82000000 if TFABOOT default 0x20100000 -if FSL_LS_PPA -config SYS_LS_PPA_FW_ADDR - hex "PPA Firmware Addr" - default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1028A - default 0x400000 if SYS_LS_PPA_FW_IN_MMC && ARCH_LS1028A -if CHAIN_OF_TRUST -config SYS_LS_PPA_ESBC_ADDR - hex "PPA header Addr" - default 0x20600000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1028A -endif -endif - endif if TARGET_LS1028ARDB diff --git a/board/freescale/ls1028a/ls1028a.c b/board/freescale/ls1028a/ls1028a.c index faecb6099240..7f181ab3dfb7 100644 --- a/board/freescale/ls1028a/ls1028a.c +++ b/board/freescale/ls1028a/ls1028a.c @@ -20,9 +20,6 @@ #include #include #include -#ifdef CONFIG_FSL_LS_PPA -#include -#endif #include #include @@ -74,10 +71,6 @@ u32 get_lpuart_clk(void) int board_init(void) { -#ifdef CONFIG_FSL_LS_PPA - ppa_init(); -#endif - #ifndef CONFIG_SYS_EARLY_PCI_INIT pci_init(); #endif diff --git a/board/freescale/ls1043aqds/Kconfig b/board/freescale/ls1043aqds/Kconfig index 4be445e8c8f8..7e27f8f5b139 100644 --- a/board/freescale/ls1043aqds/Kconfig +++ b/board/freescale/ls1043aqds/Kconfig @@ -12,20 +12,4 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1043aqds" -if FSL_LS_PPA -config SYS_LS_PPA_FW_ADDR - hex "PPA Firmware Addr" - default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT - default 0x60400000 if SYS_LS_PPA_FW_IN_XIP - default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND - -if CHAIN_OF_TRUST -config SYS_LS_PPA_ESBC_ADDR - hex "PPA Firmware HDR Addr" - default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT - default 0x60680000 if SYS_LS_PPA_FW_IN_XIP - default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND -endif -endif - endif diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c index 841d8b59bb4c..b87da41e4083 100644 --- a/board/freescale/ls1043aqds/ls1043aqds.c +++ b/board/freescale/ls1043aqds/ls1043aqds.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include @@ -533,10 +532,6 @@ int board_init(void) config_serdes_mux(); #endif -#ifdef CONFIG_FSL_LS_PPA - ppa_init(); -#endif - return 0; } diff --git a/board/freescale/ls1043ardb/Kconfig b/board/freescale/ls1043ardb/Kconfig index 56502f9f9c63..51818ec58016 100644 --- a/board/freescale/ls1043ardb/Kconfig +++ b/board/freescale/ls1043ardb/Kconfig @@ -13,18 +13,4 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1043ardb" -if FSL_LS_PPA -config SYS_LS_PPA_FW_ADDR - hex "PPA Firmware Addr" - default 0x60400000 if SYS_LS_PPA_FW_IN_XIP - default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND - -if CHAIN_OF_TRUST -config SYS_LS_PPA_ESBC_ADDR - hex "PPA Firmware HDR Addr" - default 0x60680000 if SYS_LS_PPA_FW_IN_XIP - default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND -endif -endif - endif diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c index 741a4d64ea9e..18869d8c1df5 100644 --- a/board/freescale/ls1043ardb/ls1043ardb.c +++ b/board/freescale/ls1043ardb/ls1043ardb.c @@ -25,7 +25,6 @@ #ifdef CONFIG_U_QE #include #endif -#include DECLARE_GLOBAL_DATA_PTR; @@ -211,10 +210,6 @@ int board_init(void) out_le32(SMMU_NSCR0, val); #endif -#ifdef CONFIG_FSL_LS_PPA - ppa_init(); -#endif - #if !defined(CONFIG_SYS_EARLY_PCI_INIT) && defined(CONFIG_DM_ETH) pci_init(); #endif diff --git a/board/freescale/ls1046aqds/Kconfig b/board/freescale/ls1046aqds/Kconfig index adf325f4efd0..723f4ba90a07 100644 --- a/board/freescale/ls1046aqds/Kconfig +++ b/board/freescale/ls1046aqds/Kconfig @@ -12,20 +12,4 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1046aqds" -if FSL_LS_PPA -config SYS_LS_PPA_FW_ADDR - hex "PPA Firmware Addr" - default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT - default 0x60400000 if SYS_LS_PPA_FW_IN_XIP - default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND - -if CHAIN_OF_TRUST -config SYS_LS_PPA_ESBC_ADDR - hex "PPA Firmware HDR Addr" - default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT - default 0x60680000 if SYS_LS_PPA_FW_IN_XIP - default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND -endif -endif - endif diff --git a/board/freescale/ls1046aqds/ls1046aqds.c b/board/freescale/ls1046aqds/ls1046aqds.c index 3d0881643cd9..2faac54a0e23 100644 --- a/board/freescale/ls1046aqds/ls1046aqds.c +++ b/board/freescale/ls1046aqds/ls1046aqds.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include @@ -402,10 +401,6 @@ int board_init(void) if (adjust_vdd(0)) printf("Warning: Adjusting core voltage failed.\n"); -#ifdef CONFIG_FSL_LS_PPA - ppa_init(); -#endif - #ifdef CONFIG_NXP_ESBC /* * In case of Secure Boot, the IBR configures the SMMU diff --git a/board/freescale/ls1046ardb/Kconfig b/board/freescale/ls1046ardb/Kconfig index 1fb391c991c6..a62255c78dbb 100644 --- a/board/freescale/ls1046ardb/Kconfig +++ b/board/freescale/ls1046ardb/Kconfig @@ -13,18 +13,4 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1046ardb" -if FSL_LS_PPA -config SYS_LS_PPA_FW_ADDR - hex "PPA Firmware Addr" - default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT - default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND - -if CHAIN_OF_TRUST -config SYS_LS_PPA_ESBC_ADDR - hex "PPA Firmware HDR Addr" - default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT - default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND -endif -endif - endif diff --git a/board/freescale/ls1046ardb/ls1046ardb.c b/board/freescale/ls1046ardb/ls1046ardb.c index 1d12d9189b78..26e69db55f74 100644 --- a/board/freescale/ls1046ardb/ls1046ardb.c +++ b/board/freescale/ls1046ardb/ls1046ardb.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include @@ -96,10 +95,6 @@ int board_init(void) out_le32(SMMU_NSCR0, val); #endif -#ifdef CONFIG_FSL_LS_PPA - ppa_init(); -#endif - #if !defined(CONFIG_SYS_EARLY_PCI_INIT) && defined(CONFIG_DM_ETH) pci_init(); #endif diff --git a/board/freescale/ls1088a/Kconfig b/board/freescale/ls1088a/Kconfig index f1a45236061b..1ada661743ed 100644 --- a/board/freescale/ls1088a/Kconfig +++ b/board/freescale/ls1088a/Kconfig @@ -12,20 +12,6 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1088aqds" -if FSL_LS_PPA -config SYS_LS_PPA_FW_ADDR - hex "PPA Firmware Addr" - default 0x20400000 if SYS_LS_PPA_FW_IN_XIP - default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND - -if CHAIN_OF_TRUST -config SYS_LS_PPA_ESBC_ADDR - hex "PPA Firmware HDR Addr" - default 0x20680000 if SYS_LS_PPA_FW_IN_XIP - default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND -endif -endif - endif if TARGET_LS1088ARDB @@ -42,18 +28,4 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1088ardb" -if FSL_LS_PPA -config SYS_LS_PPA_FW_ADDR - hex "PPA Firmware Addr" - default 0x20400000 if SYS_LS_PPA_FW_IN_XIP - default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND - -if CHAIN_OF_TRUST -config SYS_LS_PPA_ESBC_ADDR - hex "PPA Firmware HDR Addr" - default 0x20680000 if SYS_LS_PPA_FW_IN_XIP - default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND -endif -endif - endif diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c index 7a1047a77f73..65593f10a3f5 100644 --- a/board/freescale/ls1088a/ls1088a.c +++ b/board/freescale/ls1088a/ls1088a.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include @@ -820,10 +819,6 @@ int board_init(void) out_le32(irq_ccsr + IRQCR_OFFSET / 4, AQR105_IRQ_MASK); #endif -#ifdef CONFIG_FSL_LS_PPA - ppa_init(); -#endif - #if !defined(CONFIG_SYS_EARLY_PCI_INIT) pci_init(); #endif diff --git a/board/freescale/ls2080aqds/Kconfig b/board/freescale/ls2080aqds/Kconfig index 1036f33c61fa..2f997e9de1ac 100644 --- a/board/freescale/ls2080aqds/Kconfig +++ b/board/freescale/ls2080aqds/Kconfig @@ -13,20 +13,4 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls2080aqds" -if FSL_LS_PPA -config SYS_LS_PPA_FW_ADDR - hex "PPA Firmware Addr" - default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT - default 0x580400000 if SYS_LS_PPA_FW_IN_XIP - default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND - -if CHAIN_OF_TRUST -config SYS_LS_PPA_ESBC_ADDR - hex "PPA Firmware HDR Addr" - default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT - default 0x580680000 if SYS_LS_PPA_FW_IN_XIP - default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND -endif -endif - endif diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c index ab5ff6f62ce0..ba25e9b0b8fc 100644 --- a/board/freescale/ls2080aqds/ls2080aqds.c +++ b/board/freescale/ls2080aqds/ls2080aqds.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include "../common/i2c_mux.h" @@ -223,10 +222,6 @@ int board_init(void) #endif #endif -#ifdef CONFIG_FSL_LS_PPA - ppa_init(); -#endif - #if !defined(CONFIG_SYS_EARLY_PCI_INIT) pci_init(); #endif diff --git a/board/freescale/ls2080ardb/Kconfig b/board/freescale/ls2080ardb/Kconfig index c8b0b94596b5..671eead5f7f0 100644 --- a/board/freescale/ls2080ardb/Kconfig +++ b/board/freescale/ls2080ardb/Kconfig @@ -12,20 +12,4 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls2080ardb" -if FSL_LS_PPA -config SYS_LS_PPA_FW_ADDR - hex "PPA Firmware Addr" - default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT - default 0x580400000 if SYS_LS_PPA_FW_IN_XIP - default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND - -if CHAIN_OF_TRUST -config SYS_LS_PPA_ESBC_ADDR - hex "PPA Firmware HDR Addr" - default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT - default 0x580680000 if SYS_LS_PPA_FW_IN_XIP - default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND -endif -endif - endif diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c index a7fc2b207660..8d340f17a256 100644 --- a/board/freescale/ls2080ardb/ls2080ardb.c +++ b/board/freescale/ls2080ardb/ls2080ardb.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include "../common/i2c_mux.h" @@ -288,10 +287,6 @@ int board_init(void) QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET_EN); #endif -#ifdef CONFIG_FSL_LS_PPA - ppa_init(); -#endif - #ifdef CONFIG_FSL_MC_ENET /* invert AQR405 IRQ pins polarity */ out_le32(irq_ccsr + IRQCR_OFFSET / 4, AQR405_IRQ_MASK); diff --git a/board/traverse/ten64/ten64.c b/board/traverse/ten64/ten64.c index df9f0afe1a4f..6ff5312d6d79 100644 --- a/board/traverse/ten64/ten64.c +++ b/board/traverse/ten64/ten64.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include diff --git a/env/Kconfig b/env/Kconfig index 13e32104b4c1..b8bbe246c541 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -645,7 +645,7 @@ config SYS_RELOC_GD_ENV_ADDR config SYS_MMC_ENV_DEV int "mmc device number" - depends on ENV_IS_IN_MMC || ENV_IS_IN_FAT || SYS_LS_PPA_FW_IN_MMC || \ + depends on ENV_IS_IN_MMC || ENV_IS_IN_FAT || \ CMD_MVEBU_BUBT || FMAN_ENET || QE || PHY_CORTINA default 0 help diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 38fb1d45bcb3..867b098a0732 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -21,8 +21,7 @@ (defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT)) #define SPL_NO_MMC #endif -#if defined(CONFIG_SPL_BUILD) && \ - !defined(CONFIG_SPL_FSL_LS_PPA) +#if defined(CONFIG_SPL_BUILD) #define SPL_NO_IFC #endif