From patchwork Mon Apr 3 10:50:51 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Cristian Ciocaltea X-Patchwork-Id: 1764391 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: legolas.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=collabora.com header.i=@collabora.com header.a=rsa-sha256 header.s=mail header.b=AM6QdN55; dkim-atps=neutral Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by legolas.ozlabs.org (Postfix) with ESMTP id 4Pqnkj3cYfz1yZV for ; Mon, 3 Apr 2023 20:51:25 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231553AbjDCKvX (ORCPT ); Mon, 3 Apr 2023 06:51:23 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40538 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231889AbjDCKvC (ORCPT ); Mon, 3 Apr 2023 06:51:02 -0400 Received: from madras.collabora.co.uk (madras.collabora.co.uk [IPv6:2a00:1098:0:82:1000:25:2eeb:e5ab]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4721C8690; Mon, 3 Apr 2023 03:51:01 -0700 (PDT) Received: from localhost (unknown [188.27.34.213]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-256) server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) (Authenticated sender: cristicc) by madras.collabora.co.uk (Postfix) with ESMTPSA id 8C2CA6601F5E; Mon, 3 Apr 2023 11:50:59 +0100 (BST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=collabora.com; s=mail; t=1680519059; bh=3p6JM3yd+WNtA17Lh4gwyYervmzfd8F94ozGs1R5ndg=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=AM6QdN55bibFuOhSGSqDXnGJ/x/2UP38lGYkrJph8AcpokSGG68FR7mJ+qFxbRoPv /yUpWdzsscPfJ5kGt3enNjNiyellhBMCZqWl3oykS0mhE4Engzmhp6Rqg4ih5Micro 5OD73v/HMboooby22jVWDbG8oNyMnF0FcIxOaqYcXPfkNhAjc8SnJPzFdPOJwQHcdU mGSJxSoSXHkuMQ4zwvONnA6iqGSfX/+Hjgw/g/x4aGNyW03TFwFi76KE5onUcwvH3t ynn82IAaAgRp+SQQuxewqr2hrzQc1IxZBY2QOCP4n9E5RveTXezF8FfIhwT6BXIltx 6KioWqEmb1vCg== From: Cristian Ciocaltea To: Jean Delvare , Guenter Roeck , Rob Herring , Krzysztof Kozlowski , Heiko Stuebner Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, kernel@collabora.com Subject: [PATCH 1/2] dt-bindings: hwmon: pwm-fan: Convert to DT schema Date: Mon, 3 Apr 2023 13:50:51 +0300 Message-Id: <20230403105052.426135-2-cristian.ciocaltea@collabora.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230403105052.426135-1-cristian.ciocaltea@collabora.com> References: <20230403105052.426135-1-cristian.ciocaltea@collabora.com> MIME-Version: 1.0 X-Spam-Status: No, score=-0.2 required=5.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Convert the PWM fan bindings to DT schema format. Signed-off-by: Cristian Ciocaltea --- .../devicetree/bindings/hwmon/pwm-fan.txt | 68 +---------- .../devicetree/bindings/hwmon/pwm-fan.yaml | 109 ++++++++++++++++++ 2 files changed, 110 insertions(+), 67 deletions(-) create mode 100644 Documentation/devicetree/bindings/hwmon/pwm-fan.yaml diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt index 4509e688623a..48886f0ce415 100644 --- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt @@ -1,67 +1 @@ -Bindings for a fan connected to the PWM lines - -Required properties: -- compatible : "pwm-fan" -- pwms : the PWM that is used to control the PWM fan -- cooling-levels : PWM duty cycle values in a range from 0 to 255 - which correspond to thermal cooling states - -Optional properties: -- fan-supply : phandle to the regulator that provides power to the fan -- interrupts : This contains an interrupt specifier for each fan - tachometer output connected to an interrupt source. - The output signal must generate a defined number of - interrupts per fan revolution, which require that - it must be self resetting edge interrupts. See - interrupt-controller/interrupts.txt for the format. -- pulses-per-revolution : define the number of pulses per fan revolution for - each tachometer input as an integer (default is 2 - interrupts per revolution). The value must be - greater than zero. - -Example: - fan0: pwm-fan { - compatible = "pwm-fan"; - #cooling-cells = <2>; - pwms = <&pwm 0 10000 0>; - cooling-levels = <0 102 170 230>; - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - thermal-sensors = <&tmu 0>; - polling-delay-passive = <0>; - polling-delay = <0>; - trips { - cpu_alert1: cpu-alert1 { - temperature = <100000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - }; - cooling-maps { - map0 { - trip = <&cpu_alert1>; - cooling-device = <&fan0 0 1>; - }; - }; - }; - -Example 2: - fan0: pwm-fan { - compatible = "pwm-fan"; - pwms = <&pwm 0 40000 0>; - fan-supply = <®_fan>; - interrupt-parent = <&gpio5>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - pulses-per-revolution = <2>; - }; - -Example 3: - fan0: pwm-fan { - compatible = "pwm-fan"; - pwms = <&pwm1 0 25000 0>; - interrupts-extended = <&gpio1 1 IRQ_TYPE_EDGE_FALLING>, - <&gpio2 5 IRQ_TYPE_EDGE_FALLING>; - pulses-per-revolution = <2>, <1>; - }; +This file has moved to pwm-fan.yaml. diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml new file mode 100644 index 000000000000..448b48ec5d73 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/pwm-fan.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fan connected to PWM lines + +maintainers: + - Jean Delvare + - Guenter Roeck + +properties: + compatible: + const: pwm-fan + + cooling-levels: + description: + PWM duty cycle values in a range from 0 to 255 which correspond to + thermal cooling states. + $ref: /schemas/types.yaml#/definitions/uint32-array + + fan-supply: + description: Phandle to the regulator that provides power to the fan. + + interrupts: + description: + This contains an interrupt specifier for each fan tachometer output + connected to an interrupt source. The output signal must generate a + defined number of interrupts per fan revolution, which require that + it must be self resetting edge interrupts. + + pulses-per-revolution: + description: + Define the number of pulses per fan revolution for each tachometer + input as an integer (default is 2 interrupts per revolution). + The value must be greater than zero. + $ref: /schemas/types.yaml#/definitions/uint32-array + + pwms: + description: The PWM that is used to control the fan. + maxItems: 1 + + pwm-names: true + + "#cooling-cells": + description: The PWM fan can be referenced as a cooling-device. + const: 2 + +required: + - compatible + - pwms + +additionalProperties: false + +examples: + - | + pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 102 170 230>; + pwms = <&pwm 0 10000 0>; + #cooling-cells = <2>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + thermal-sensors = <&tmu 0>; + polling-delay-passive = <0>; + polling-delay = <0>; + + trips { + cpu_alert1: cpu-alert1 { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert1>; + cooling-device = <&fan0 0 1>; + }; + }; + }; + }; + + - | + #include + + pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm 0 40000 0>; + fan-supply = <®_fan>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + pulses-per-revolution = <2>; + }; + + - | + #include + + pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm1 0 25000 0>; + interrupts-extended = <&gpio1 1 IRQ_TYPE_EDGE_FALLING>, + <&gpio2 5 IRQ_TYPE_EDGE_FALLING>; + pulses-per-revolution = <2>, <1>; + };