From patchwork Tue Jan 19 07:16:23 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Matti Vaittinen X-Patchwork-Id: 1428498 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4DKgJl0lXgz9sVF for ; Tue, 19 Jan 2021 18:29:27 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726296AbhASH1u (ORCPT ); Tue, 19 Jan 2021 02:27:50 -0500 Received: from mail-ej1-f43.google.com ([209.85.218.43]:46855 "EHLO mail-ej1-f43.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728280AbhASH1i (ORCPT ); Tue, 19 Jan 2021 02:27:38 -0500 Received: by mail-ej1-f43.google.com with SMTP id rv9so8274530ejb.13 for ; Mon, 18 Jan 2021 23:27:18 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=njM+r5739maNvAMaKSZAfi4YYRGmoIe8sXQDSd2vGS4=; b=maeRLknnPpL8kosbLm+vHwsHFHGtGg4Lr1jGHKdaxeoGVoXcvQqi47EEcTHbPAG5lT Jl45/qgOWUXQXNr9IsWsL3HbhkkkJi5qFSusMH2nmpVVve/HhMSvnfTEKiNIVIlXwd2/ hHzT2pTEU6tGf7eAvMif/hTDQVBysE6W3u5T+RFHk6bF0AfvwGHSKHTYzBLYX0gqDlZv GobIEYF7XhUtf9QbciCIkcs3aJKYDpK+7Kw8ETacLhHdtuHHaoNl0CI3HGfD70Y24kAe OBrdULidgFN9b/6iWIiVFWnacn3cyDE2KPC0SyHt8jdd3RSQh5/O6+m2Au9KEDm2uKmn 9ORA== X-Gm-Message-State: AOAM532JTcWiYh+ra6Wfw/aQK1JgwXDjGqe6v+esNjCA3oVnTLZWa0qi pmo/uyYZeeJ5yKevOETIpYjTgvdPd+7MTw== X-Google-Smtp-Source: ABdhPJy6dq3rM1KjpzibXsd4DeX1TwQyRyHiDjzLDbSr+zMoko/U/s74yXSrbXaNAeNc12+r18vy5g== X-Received: by 2002:a2e:9f52:: with SMTP id v18mr1344525ljk.510.1611040591332; Mon, 18 Jan 2021 23:16:31 -0800 (PST) Received: from localhost.localdomain (62-78-225-252.bb.dnainternet.fi. [62.78.225.252]) by smtp.gmail.com with ESMTPSA id s20sm2193138lfc.26.2021.01.18.23.16.29 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 18 Jan 2021 23:16:30 -0800 (PST) Date: Tue, 19 Jan 2021 09:16:23 +0200 From: Matti Vaittinen To: matti.vaittinen@fi.rohmeurope.com, mazziesaccount@gmail.com Cc: Lee Jones , Rob Herring , Liam Girdwood , Mark Brown , Matti Vaittinen , Michael Turquette , Stephen Boyd , Linus Walleij , Bartosz Golaszewski , Alessandro Zummo , Alexandre Belloni , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-power@fi.rohmeurope.com, linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org, linux-rtc@vger.kernel.org Subject: [PATCH v2 05/17] dt_bindings: bd71828: Add clock output mode Message-ID: <1b6077ad08f7eacdac6604439d0921778d6046db.1611037866.git.matti.vaittinen@fi.rohmeurope.com> References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org The BD71828 allows configuring the clk32kout pin mode to CMOS or open-drain. Add device-tree property for specifying the preferred mode. Signed-off-by: Matti Vaittinen Reviewed-by: Rob Herring --- Changes from v1: switched clk-mode property from string type to tristated one as suggested by Rob. .../devicetree/bindings/mfd/rohm,bd71828-pmic.yaml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml index 3a6a1a26e2b3..8380166d176c 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml @@ -44,6 +44,12 @@ properties: clock-output-names: const: bd71828-32k-out + rohm,clkout-open-drain: + description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos". + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1 + rohm,charger-sense-resistor-ohms: minimum: 10000000 maximum: 50000000 From patchwork Tue Jan 19 07:17:09 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Matti Vaittinen X-Patchwork-Id: 1428486 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4DKg633tRGz9sW8 for ; Tue, 19 Jan 2021 18:20:11 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729511AbhASHT7 (ORCPT ); Tue, 19 Jan 2021 02:19:59 -0500 Received: from mail-lj1-f182.google.com ([209.85.208.182]:33940 "EHLO mail-lj1-f182.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728594AbhASHSq (ORCPT ); Tue, 19 Jan 2021 02:18:46 -0500 Received: by mail-lj1-f182.google.com with SMTP id m10so20759848lji.1; Mon, 18 Jan 2021 23:17:43 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=tO6TArPCft4SsS7zinMP/yVERBOCtziNNR684d1B0wk=; b=G/WhYpV0NgAuGHj4BhhjnPnpeGj4p02I0Y4GsynFFe8mYSm3DGymF7AFeYmLxKD4QQ a1OT/DOWKN1wNPZ1O0jEIYotvt3Sgzj0YOt+d6SeTDdQ94UhtpcgZXY7+Dqf5KK8O6dH 3pPfkvZMruHfePePmxHvmn1ksRS33RgShRVrRdNBB4cYi1+ZVmtAldpv/eSGELEiK8TN 2ag8Fy6yYsEObpTxUmjk7Uy7LK5g6cdfsGvSfptqNrBkSF4gZMXIXhF9KTg7qciJS+h2 tVr7C80tdBCsKlarnJsBiTSCOxRSgWTKeJCT5ttMd4P8cJuERKj0UKjVzYSZbPjya80c N8cA== X-Gm-Message-State: AOAM5324IjzpZ58sIOL8JKvvbH+FOQz9W8VPYj2TLKDn60jYWBEeY/Ul YLEUyI+IumzqOOls4qS9lxs= X-Google-Smtp-Source: ABdhPJwNmvxo7ogFbV5I54CvyXWuleIRvQ3q+9kIpD6ViXF0TVbvKaNwt+fTnGDqDyEkRdR1Tqj6Kg== X-Received: by 2002:a2e:9a0d:: with SMTP id o13mr1369119lji.355.1611040637917; Mon, 18 Jan 2021 23:17:17 -0800 (PST) Received: from localhost.localdomain (62-78-225-252.bb.dnainternet.fi. [62.78.225.252]) by smtp.gmail.com with ESMTPSA id z14sm2253271lfq.130.2021.01.18.23.17.16 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 18 Jan 2021 23:17:17 -0800 (PST) Date: Tue, 19 Jan 2021 09:17:09 +0200 From: Matti Vaittinen To: matti.vaittinen@fi.rohmeurope.com, mazziesaccount@gmail.com Cc: Lee Jones , Rob Herring , Liam Girdwood , Mark Brown , Matti Vaittinen , Michael Turquette , Stephen Boyd , Linus Walleij , Bartosz Golaszewski , Alessandro Zummo , Alexandre Belloni , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-power@fi.rohmeurope.com, linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org, linux-rtc@vger.kernel.org Subject: [PATCH v2 06/17] dt_bindings: regulator: Add ROHM BD71815 PMIC regulators Message-ID: <950a87e680822ab6457ff95bba96730fed93e14d.1611037866.git.matti.vaittinen@fi.rohmeurope.com> References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add binding documentation for regulators on ROHM BD71815 PMIC. 5 bucks, 7 LDOs and a boost for LED. Signed-off-by: Matti Vaittinen Reviewed-by: Rob Herring --- Changes since v1: - Changed patch order to fix ref dependecy - Added missing schema for nodes wled, ldodvref, ldolpsr .../regulator/rohm,bd71815-regulator.yaml | 116 ++++++++++++++++++ 1 file changed, 116 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml new file mode 100644 index 000000000000..7d0adb74a396 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/rohm,bd71815-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71815 Power Management Integrated Circuit regulators + +maintainers: + - Matti Vaittinen + +description: | + This module is part of the ROHM BD718215 MFD device. For more details + see Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml. + + The regulator controller is represented as a sub-node of the PMIC node + on the device tree. + + The valid names for BD71815 regulator nodes are + buck1, buck2, buck3, buck4, buck5, + ldo1, ldo2, ldo3, ldo4, ldo5, + ldodvref, ldolpsr, wled + +properties: + wled: + type: object + description: + properties for wled regulator + $ref: regulator.yaml# + + properties: + regulator-name: + const: wled + +patternProperties: + "^((ldo|buck)[1-5]|ldolpsr|ldodvref)$": + type: object + description: + Properties for single LDO/BUCK regulator. + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^((ldo|buck)[1-5]|ldolpsr|ldodvref)$" + description: + should be "ldo1", ..., "ldo5", "buck1", ..., "buck5" and "ldolpsr" + for ldolpsr regulator, "ldodvref" for ldodvref reglator. + + rohm,vsel-gpios: + description: + GPIO used to control ldo4 state (when ldo4 is controlled by GPIO). + + rohm,dvs-run-voltage: + description: + PMIC "RUN" state voltage in uV when PMIC HW states are used. See + comments below for bucks/LDOs which support this. 0 means + regulator should be disabled at RUN state. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 + + rohm,dvs-snvs-voltage: + description: + Whether to keep regulator enabled at "SNVS" state or not. + 0 means regulator should be disabled at SNVS state, non zero voltage + keeps regulator enabled. BD71815 does not change voltage level + when PMIC transitions to SNVS.SNVS voltage depends on the previous + state (from which the PMIC transitioned to SNVS). + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 + + rohm,dvs-suspend-voltage: + description: + PMIC "SUSPEND" state voltage in uV when PMIC HW states are used. See + comments below for bucks/LDOs which support this. 0 means + regulator should be disabled at SUSPEND state. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 + + rohm,dvs-lpsr-voltage: + description: + PMIC "LPSR" state voltage in uV when PMIC HW states are used. See + comments below for bucks/LDOs which support this. 0 means + regulator should be disabled at LPSR state. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 + + # Bucks 1 and 2 support giving separate voltages for operational states + # (RUN /CLEAN according to data-sheet) and non operational states + # (LPSR/SUSPEND). The voltage is automatically changed when HW + # state changes. Omitting these properties from bucks 1 and 2 leave + # buck voltages to not be toggled by HW state. Enable status may still + # be toggled by state changes depending on HW default settings. + # + # Bucks 3-5 and ldos 1-5 support setting the RUN state voltage here. + # Given RUN voltage is used at all states if regulator is enabled at + # given state. + # Values given for other states are regarded as enable/disable at + # given state (see below). + # + # All regulators except WLED support specifying enable/disable status + # for each of the HW states (RUN/SNVS/SUSPEND/LPSR). HW defaults can + # be overridden by setting voltage to 0 (regulator disabled at given + # state) or non-zero (regulator enabled at given state). Please note + # that setting non zero voltages for bucks 1/2 will also enable voltage + # changes according to state change. + + required: + - regulator-name + + unevaluatedProperties: false + +additionalProperties: false From patchwork Tue Jan 19 07:21:23 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Matti Vaittinen X-Patchwork-Id: 1428491 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4DKg9F0Nbrz9sSs for ; Tue, 19 Jan 2021 18:22:57 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730691AbhASHWg (ORCPT ); Tue, 19 Jan 2021 02:22:36 -0500 Received: from mail-lf1-f47.google.com ([209.85.167.47]:33451 "EHLO mail-lf1-f47.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730597AbhASHWV (ORCPT ); Tue, 19 Jan 2021 02:22:21 -0500 Received: by mail-lf1-f47.google.com with SMTP id v67so27666645lfa.0; Mon, 18 Jan 2021 23:21:57 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=yuol3XCJ+uJshcSsbfW6MAHHBCYuOW9vHmPszs5r2uE=; b=rGxBxQ7LXXkK8lzItN3KOdLaPLNCUc/T78n1VJ7bZo3pNILl8DA9muWiMvrKc7Kicu XfMX1qEMUhdH6S83aNQq4gzUmjeT6xV7+d+LHkEqhWQbRxH7EA/HvjcmUOJoG9E+HIK1 +IIDbwqgiJajqGrSNGgbQ5r3rOlnQYKV049gTzG1g0tb3Tc0SMIHU1Aeq/6gqVDcPxzv tCUHmQDaw/cEab17SLz11qTCjktGR2wNlLKG9ls788Xp3eDwvcdUE0/4v8NN0zS08xuy STUkFNjfCur2CzRLvR/SPuikZnsY892/acViTvOFnsl3eeljozLR1bGkjozNoVnpVpoK HfOg== X-Gm-Message-State: AOAM533h3oF8jae9t4ZSngtv8NvMS/iBlvoQitCSS8YUG39lQaRHiZ4M 74JiSweFaicrKkQJZqzBXs8= X-Google-Smtp-Source: ABdhPJwDDsr2dFWaDyEIXAFjRUepvFCDCV637htUh0CXr7GctVRcWaGSH+/U4uu3MEBdAj75hHalFA== X-Received: by 2002:ac2:5234:: with SMTP id i20mr1240210lfl.71.1611040891700; Mon, 18 Jan 2021 23:21:31 -0800 (PST) Received: from localhost.localdomain (62-78-225-252.bb.dnainternet.fi. [62.78.225.252]) by smtp.gmail.com with ESMTPSA id o14sm2186188lfi.92.2021.01.18.23.21.30 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 18 Jan 2021 23:21:31 -0800 (PST) Date: Tue, 19 Jan 2021 09:21:23 +0200 From: Matti Vaittinen To: matti.vaittinen@fi.rohmeurope.com, mazziesaccount@gmail.com Cc: Lee Jones , Rob Herring , Liam Girdwood , Mark Brown , Matti Vaittinen , Michael Turquette , Stephen Boyd , Linus Walleij , Bartosz Golaszewski , Alessandro Zummo , Alexandre Belloni , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-power@fi.rohmeurope.com, linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org, linux-rtc@vger.kernel.org Subject: [PATCH v2 07/17] dt_bindings: mfd: Add ROHM BD71815 PMIC Message-ID: <5e58cc041572d8540b4f1fbeea7bde955d6b2ea6.1611037866.git.matti.vaittinen@fi.rohmeurope.com> References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Document DT bindings for ROHM BD71815. BD71815 is a single-chip power management IC mainly for battery-powered portable devices. The IC integrates 5 bucks, 7 LDOs, a boost driver for LED, a battery charger with a Coulomb counter, a real-time clock, a 32kHz clock and two general-purpose outputs although only one is documented by the data-sheet. Signed-off-by: Matti Vaittinen Reviewed-by: Rob Herring --- Changes since v1: - fixed patch ordering to meet ref dependencies - added missing blank lines - clkout-mode changed from string to tristated (uint) - added default for rsense resistor .../bindings/mfd/rohm,bd71815-pmic.yaml | 202 ++++++++++++++++++ 1 file changed, 202 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml new file mode 100644 index 000000000000..b52b8585d48d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml @@ -0,0 +1,202 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd71815-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71815 Power Management Integrated Circuit bindings + +maintainers: + - Matti Vaittinen + +description: | + BD71815AGW is a single-chip power management ICs for battery-powered + portable devices. It integrates 5 buck converters, 8 LDOs, a boost driver + for LED and a 500 mA single-cell linear charger. Also included is a Coulomb + counter, a real-time clock (RTC), and a 32.768 kHz clock gate and two GPOs. + +properties: + compatible: + const: rohm,bd71815 + + reg: + description: + I2C slave address. + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + The first cell is the pin number and the second cell is used to specify + flags. See ../gpio/gpio.txt for more information. + + clocks: + maxItems: 1 + + "#clock-cells": + const: 0 + + clock-output-names: + const: bd71815-32k-out + + rohm,clkout-open-drain: + description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos". + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1 + + rohm,charger-sense-resistor-ohms: + minimum: 10000000 + maximum: 50000000 + description: | + BD71827 and BD71828 have SAR ADC for measuring charging currents. + External sense resistor (RSENSE in data sheet) should be used. If + something other but 30MOhm resistor is used the resistance value + should be given + here in Ohms. + default: 30000000 + + regulators: + $ref: ../regulator/rohm,bd71815-regulator.yaml + description: + List of child nodes that specify the regulators. + + gpio-reserved-ranges: + description: | + Usage of BD71828 GPIO pins can be changed via OTP. This property can be + used to mark the pins which should not be configured for GPIO. Please see + the ../gpio/gpio.txt for more information. + + rohm,enable-hidden-gpo: + description: | + The BD71815 has undocumented GPO at pin E5. Pin is marked as GND at the + data-sheet as it's location in the middle of GND pins makes it hard to + use on PCB. If your board has managed to use this pin you can enable the + second GPO by defining this property. Dont enable this if you are unsure + about how the E5 pin is connected on your board. + type: boolean + +required: + - compatible + - reg + - interrupts + - clocks + - "#clock-cells" + - regulators + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@4b { + compatible = "rohm,bd71815"; + reg = <0x4b>; + + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + clocks = <&osc 0>; + #clock-cells = <0>; + clock-output-names = "bd71815-32k-out"; + + gpio-controller; + #gpio-cells = <2>; + + rohm,charger-sense-resistor-ohms = <10000000>; + + regulators { + buck1: buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1150000>; + rohm,dvs-suspend-voltage = <950000>; + }; + buck2: buck2 { + regulator-name = "buck2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1150000>; + rohm,dvs-suspend-voltage = <950000>; + }; + buck3: buck3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + buck4: buck4 { + regulator-name = "buck4"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-always-on; + }; + buck5: buck5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo1: ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo2: ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo3: ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo4: ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo5: ldo5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo6: ldodvref { + regulator-name = "ldodvref"; + regulator-always-on; + }; + ldo7: ldolpsr { + regulator-name = "ldolpsr"; + regulator-always-on; + }; + + boost: wled { + regulator-name = "wled"; + regulator-min-microamp = <10>; + regulator-max-microamp = <25000>; + }; + }; + }; + };