From patchwork Wed Sep 30 15:35:02 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 1374457 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=bKRWiDKV; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4C1gMB3fVsz9sSs for ; Thu, 1 Oct 2020 01:35:50 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729848AbgI3Pft (ORCPT ); Wed, 30 Sep 2020 11:35:49 -0400 Received: from fllv0016.ext.ti.com ([198.47.19.142]:47358 "EHLO fllv0016.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725823AbgI3Pfs (ORCPT ); Wed, 30 Sep 2020 11:35:48 -0400 Received: from lelv0265.itg.ti.com ([10.180.67.224]) by fllv0016.ext.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZYkU076378; Wed, 30 Sep 2020 10:35:34 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1601480134; bh=PEAp/tAtz4SG7iL1uO7TRLavF7BSCuhGXN4014rUOJE=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=bKRWiDKVy6hbfur1B0aVWc4amBjj2DVK51YgAKHnM9q6f1o905F76N4eGvZ5tg2Mm 2Bw/iJIBIQ/Ks5tLbPPAS4gMrsaq5Ux1ggPKxCJ1yOmbn0/D+g3x9LCRQy9OVEnSAS Zptt0jwj/KwwNtp8Q7ZPtiX3DoXwej8yYVyquODk= Received: from DFLE100.ent.ti.com (dfle100.ent.ti.com [10.64.6.21]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 08UFZYVe041008 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 30 Sep 2020 10:35:34 -0500 Received: from DFLE113.ent.ti.com (10.64.6.34) by DFLE100.ent.ti.com (10.64.6.21) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 30 Sep 2020 10:35:33 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DFLE113.ent.ti.com (10.64.6.34) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 30 Sep 2020 10:35:33 -0500 Received: from a0393678-ssd.dal.design.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZLZQ033254; Wed, 30 Sep 2020 10:35:28 -0500 From: Kishon Vijay Abraham I To: Bjorn Helgaas , Jonathan Corbet , Kishon Vijay Abraham I , Lorenzo Pieralisi , Arnd Bergmann , Jon Mason , Dave Jiang , Allen Hubbe , Tom Joseph , Rob Herring CC: Greg Kroah-Hartman , , , , Subject: [PATCH v7 01/18] Documentation: PCI: Add specification for the *PCI NTB* function device Date: Wed, 30 Sep 2020 21:05:02 +0530 Message-ID: <20200930153519.7282-2-kishon@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200930153519.7282-1-kishon@ti.com> References: <20200930153519.7282-1-kishon@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Add specification for the *PCI NTB* function device. The endpoint function driver and the host PCI driver should be created based on this specification. Signed-off-by: Kishon Vijay Abraham I --- Documentation/PCI/endpoint/index.rst | 1 + .../PCI/endpoint/pci-ntb-function.rst | 351 ++++++++++++++++++ 2 files changed, 352 insertions(+) create mode 100644 Documentation/PCI/endpoint/pci-ntb-function.rst diff --git a/Documentation/PCI/endpoint/index.rst b/Documentation/PCI/endpoint/index.rst index 4ca7439fbfc9..ef6861128506 100644 --- a/Documentation/PCI/endpoint/index.rst +++ b/Documentation/PCI/endpoint/index.rst @@ -11,5 +11,6 @@ PCI Endpoint Framework pci-endpoint-cfs pci-test-function pci-test-howto + pci-ntb-function function/binding/pci-test diff --git a/Documentation/PCI/endpoint/pci-ntb-function.rst b/Documentation/PCI/endpoint/pci-ntb-function.rst new file mode 100644 index 000000000000..f7246c812801 --- /dev/null +++ b/Documentation/PCI/endpoint/pci-ntb-function.rst @@ -0,0 +1,351 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================= +PCI NTB Function +================= + +:Author: Kishon Vijay Abraham I + +PCI Non Transparent Bridges (NTB) allow two host systems to communicate +with each other by exposing each host as a device to the other host. +NTBs typically support the ability to generate interrupts on the remote +machine, expose memory ranges as BARs and perform DMA. They also support +scratchpads which are areas of memory within the NTB that are accessible +from both machines. + +PCI NTB Function allows two different systems (or hosts) to communicate +with each other by configurig the endpoint instances in such a way that +transactions from one system is routed to the other system. + +In the below diagram, PCI NTB function configures the SoC with multiple +PCIe Endpoint (EP) instances in such a way that transaction from one EP +controller is routed to the other EP controller. Once PCI NTB function +configures the SoC with multiple EP instances, HOST1 and HOST2 can +communicate with each other using SoC as a bridge. + +.. code-block:: text + + +-------------+ +-------------+ + | | | | + | HOST1 | | HOST2 | + | | | | + +------^------+ +------^------+ + | | + | | + +---------|-------------------------------------------------|---------+ + | +------v------+ +------v------+ | + | | | | | | + | | EP | | EP | | + | | CONTROLLER1 | | CONTROLLER2 | | + | | <-----------------------------------> | | + | | | | | | + | | | | | | + | | | SoC With Multiple EP Instances | | | + | | | (Configured using NTB Function) | | | + | +-------------+ +-------------+ | + +---------------------------------------------------------------------+ + +Constructs used for Implementing NTB +==================================== + + 1) Config Region + 2) Self Scratchpad Registers + 3) Peer Scratchpad Registers + 4) Doorbell Registers + 5) Memory Window + + +Config Region: +-------------- + +Config Region is a construct that is specific to NTB implemented using NTB +Endpoint Function Driver. The host and endpoint side NTB function driver will +exchange information with each other using this region. Config Region has +Control/Status Registers for configuring the Endpoint Controller. Host can +write into this region for configuring the outbound ATU and to indicate the +link status. Endpoint can indicate the status of commands issued be host in +this region. Endpoint can also indicate the scratchpad offset, number of +memory windows to the host using this region. + +The format of Config Region is given below. Each of the fields here are 32 +bits. + +.. code-block:: text + + +------------------------+ + | COMMAND | + +------------------------+ + | ARGUMENT | + +------------------------+ + | STATUS | + +------------------------+ + | TOPOLOGY | + +------------------------+ + | ADDRESS (LOWER 32) | + +------------------------+ + | ADDRESS (UPPER 32) | + +------------------------+ + | SIZE | + +------------------------+ + | NO OF MEMORY WINDOW | + +------------------------+ + | MEMORY WINDOW1 OFFSET | + +------------------------+ + | SPAD OFFSET | + +------------------------+ + | SPAD COUNT | + +------------------------+ + | DB ENTRY SIZE | + +------------------------+ + | DB DATA | + +------------------------+ + | : | + +------------------------+ + | : | + +------------------------+ + | DB DATA | + +------------------------+ + + + COMMAND: + + NTB function supports three commands: + + CMD_CONFIGURE_DOORBELL (0x1): Command to configure doorbell. Before + invoking this command, the host should allocate and initialize + MSI/MSI-X vectors (i.e initialize the MSI/MSI-X capability in the + Endpoint). The endpoint on receiving this command will configure + the outbound ATU such that transaction to DB BAR will be routed + to the MSI/MSI-X address programmed by the host. The ARGUMENT + register should be populated with number of DBs to configure (in the + lower 16 bits) and if MSI or MSI-X should be configured (BIT 16). + (TODO: Add support for MSI-X). + + CMD_CONFIGURE_MW (0x2): Command to configure memory window. The + host invokes this command after allocating a buffer that can be + accessed by remote host. The allocated address should be programmed + in the ADDRESS register (64 bit), the size should be programmed in + the SIZE register and the memory window index should be programmed + in the ARGUMENT register. The endpoint on receiving this command + will configure the outbound ATU such that trasaction to MW BAR + will be routed to the address provided by the host. + + CMD_LINK_UP (0x3): Command to indicate an NTB application is + bound to the EP device on the host side. Once the endpoint + receives this command from both the hosts, the endpoint will + raise an LINK_UP event to both the hosts to indicate the hosts + can start communicating with each other. + + ARGUMENT: + + The value of this register is based on the commands issued in + command register. See COMMAND section for more information. + + TOPOLOGY: + + Set to NTB_TOPO_B2B_USD for Primary interface + Set to NTB_TOPO_B2B_DSD for Secondary interface + + ADDRESS/SIZE: + + Address and Size to be used while configuring the memory window. + See "CMD_CONFIGURE_MW" for more info. + + MEMORY WINDOW1 OFFSET: + + Memory Window 1 and Doorbell registers are packed together in the + same BAR. The initial portion of the region will have doorbell + registers and the latter portion of the region is for memory window 1. + This register will specify the offset of the memory window 1. + + NO OF MEMORY WINDOW: + + Specifies the number of memory windows supported by the NTB device. + + SPAD OFFSET: + + Self scratchpad region and config region are packed together in the + same BAR. The initial portion of the region will have config region + and the latter portion of the region is for self scratchpad. This + register will specify the offset of the self scratchpad registers. + + SPAD COUNT: + + Specifies the number of scratchpad registers supported by the NTB + device. + + DB ENTRY SIZE: + + Used to determine the offset within the DB BAR that should be written + in order to raise doorbell. EPF NTB can use either MSI/MSI-X to + ring doorbell (MSI-X support will be added later). MSI uses same + address for all the interrupts and MSI-X can provide different + addresses for different interrupts. The MSI/MSI-X address is provided + by the host and the address it gives is based on the MSI/MSI-X + implementation supported by the host. For instance, ARM platform + using GIC ITS will have same MSI-X address for all the interrupts. + In order to support all the combinations and use the same mechanism + for both MSI and MSI-X, EPF NTB allocates separate region in the + Outbound Address Space for each of the interrupts. This region will + be mapped to the MSI/MSI-X address provided by the host. If a host + provides the same address for all the interrupts, all the regions + will be translated to the same address. If a host provides different + address, the regions will be translated to different address. This + will ensure there is no difference while raising the doorbell. + + DB DATA: + + EPF NTB supports 32 interrupts. So there are 32 DB DATA registers. + This holds the MSI/MSI-X data that has to be written to MSI address + for raising doorbell interrupt. This will be populated by EPF NTB + while invoking CMD_CONFIGURE_DOORBELL. + +Scratchpad Registers: +--------------------- + + Each host has it's own register space allocated in the memory of NTB EPC. + They are both readable and writable from both sides of the bridge. They + are used by applications built over NTB and can be used to pass control + and status information between both sides of a device. + + Scratchpad registers has 2 parts + 1) Self Scratchpad: Host's own register space + 2) Peer Scratchpad: Remote host's register space. + +Doorbell Registers: +------------------- + + Registers using which one host can interrupt the other host. + +Memory Window: +-------------- + + Actual transfer of data between the two hosts will happen using the + memory window. + +Modeling Constructs: +==================== + +There are 5 or more distinct regions (config, self scratchpad, peer +scratchpad, doorbell, one or more memory windows) to be modeled to achieve +NTB functionality. Atleast one memory window is required while more than +one is permitted. All these regions should be mapped to BAR for hosts to +access these regions. + +If one 32-bit BAR is allocated for each of these regions, the scheme would +look like + +====== =============== +BAR NO CONSTRUCTS USED +====== =============== +BAR0 Config Region +BAR1 Self Scratchpad +BAR2 Peer Scratchpad +BAR3 Doorbell +BAR4 Memory Window 1 +BAR5 Memory Window 2 +====== =============== + +However if we allocate a separate BAR for each of the region, there would not +be enough BARs for all the regions in a platform that supports only 64-bit +BAR. + +In order to be be supported by most of the platforms, the regions should be +packed and mapped to BARs in a way that provides NTB functionality and +also making sure the hosts doesn't access any region that it is not supposed +to. + +The following scheme is used in EPF NTB Function + +====== =============================== +BAR NO CONSTRUCTS USED +====== =============================== +BAR0 Config Region + Self Scratchpad +BAR1 Peer Scratchpad +BAR2 Doorbell + Memory Window 1 +BAR3 Memory Window 2 +BAR4 Memory Window 3 +BAR5 Memory Window 4 +====== =============================== + +With this scheme, for the basic NTB functionality 3 BARs should be sufficient. + +Modeling Config/Scratchpad Region: +---------------------------------- + +.. code-block:: text + + +-----------------+------->+------------------+ +-----------------+ + | BAR0 | | CONFIG REGION | | BAR0 | + +-----------------+----+ +------------------+<-------+-----------------+ + | BAR1 | | |SCRATCHPAD REGION | | BAR1 | + +-----------------+ +-->+------------------+<-------+-----------------+ + | BAR2 | Local Memory | BAR2 | + +-----------------+ +-----------------+ + | BAR3 | | BAR3 | + +-----------------+ +-----------------+ + | BAR4 | | BAR4 | + +-----------------+ +-----------------+ + | BAR5 | | BAR5 | + +-----------------+ +-----------------+ + EP CONTROLLER 1 EP CONTROLLER 2 + +Above diagram shows Config region + Scratchpad region for HOST1 (connected to +EP controller 1) allocated in local memory. The HOST1 can access the config +region and scratchpad region (self scratchpad) using BAR0 of EP controller 1. +The peer host (HOST2 connected to EP controller 2) can also access this +scratchpad region (peer scratchpad) using BAR1 of EP controller 2. This +diagram shows the case where Config region and Scratchpad region is allocated +for HOST1, however the same is applicable for HOST2. + +Modeling Doorbell/Memory Window 1: +---------------------------------- + +.. code-block:: text + + +-----------------+ +----->+----------------+-----------+-----------------+ + | BAR0 | | | Doorbell 1 +-----------> MSI-X ADDRESS 1 | + +-----------------+ | +----------------+ +-----------------+ + | BAR1 | | | Doorbell 2 +---------+ | | + +-----------------+----+ +----------------+ | | | + | BAR2 | | Doorbell 3 +-------+ | +-----------------+ + +-----------------+----+ +----------------+ | +-> MSI-X ADDRESS 2 | + | BAR3 | | | Doorbell 4 +-----+ | +-----------------+ + +-----------------+ | |----------------+ | | | | + | BAR4 | | | | | | +-----------------+ + +-----------------+ | | MW1 +---+ | +-->+ MSI-X ADDRESS 3|| + | BAR5 | | | | | | +-----------------+ + +-----------------+ +----->-----------------+ | | | | + EP CONTROLLER 1 | | | | +-----------------+ + | | | +---->+ MSI-X ADDRESS 4 | + +----------------+ | +-----------------+ + EP CONTROLLER 2 | | | + (OB SPACE) | | | + +-------> MW1 | + | | + | | + +-----------------+ + | | + | | + | | + | | + | | + +-----------------+ + PCI Address Space + (Managed by HOST2) + +Above diagram shows how the doorbell and memory window 1 is mapped so that +HOST1 can raise doorbell interrupt on HOST2 and also how HOST1 can access +buffers exposed by HOST2 using memory window1 (MW1). Here doorbell and +memory window 1 regions are allocated in EP controller 2 outbound (OB) address +space. Allocating and configuring BARs for doorbell and memory window1 +is done during the initialization phase of NTB endpoint function driver. +Mapping from EP controller 2 OB space to PCI address space is done when HOST2 +sends CMD_CONFIGURE_MW/CMD_CONFIGURE_DOORBELL. The commands are explained +below. + +Modeling Optional Memory Windows: +--------------------------------- + +This is modeled the same was as MW1 but each of the additional memory windows +is mapped to separate BARs. From patchwork Wed Sep 30 15:35:03 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 1374458 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=ZCuj7fZf; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4C1gMH4n5pz9sSG for ; Thu, 1 Oct 2020 01:35:55 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730835AbgI3Pfy (ORCPT ); Wed, 30 Sep 2020 11:35:54 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:56902 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728916AbgI3Pfx (ORCPT ); Wed, 30 Sep 2020 11:35:53 -0400 Received: from lelv0265.itg.ti.com ([10.180.67.224]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZfVU043487; Wed, 30 Sep 2020 10:35:41 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1601480141; bh=re6MIOXxybv+Yv493YnPwG3dJx5wl6L6fPllpFd+bzs=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=ZCuj7fZfc1DtFne2mwUSOxw+7yNkfbHFSjRh+K8DgIvfIv86T8tNPgnqWmEiWPJB7 u+g6TPkZ3hYBd3x5CJZxgF+SySnGa2KU+5Yz0X8oHJqGl9lezWr/5svPDV6fLv5ehE EIYxoKreBPXXISOjrRPyuNBpE7NkC0PN43m4JFFw= Received: from DFLE100.ent.ti.com (dfle100.ent.ti.com [10.64.6.21]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 08UFZfuN041084 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 30 Sep 2020 10:35:41 -0500 Received: from DFLE102.ent.ti.com (10.64.6.23) by DFLE100.ent.ti.com (10.64.6.21) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 30 Sep 2020 10:35:41 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DFLE102.ent.ti.com (10.64.6.23) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 30 Sep 2020 10:35:41 -0500 Received: from a0393678-ssd.dal.design.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZLZR033254; Wed, 30 Sep 2020 10:35:34 -0500 From: Kishon Vijay Abraham I To: Bjorn Helgaas , Jonathan Corbet , Kishon Vijay Abraham I , Lorenzo Pieralisi , Arnd Bergmann , Jon Mason , Dave Jiang , Allen Hubbe , Tom Joseph , Rob Herring CC: Greg Kroah-Hartman , , , , Subject: [PATCH v7 02/18] PCI: endpoint: Make *_get_first_free_bar() take into account 64 bit BAR Date: Wed, 30 Sep 2020 21:05:03 +0530 Message-ID: <20200930153519.7282-3-kishon@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200930153519.7282-1-kishon@ti.com> References: <20200930153519.7282-1-kishon@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org pci_epc_get_first_free_bar() uses only "reserved_bar" member in epc_features to get the first unreserved BAR. However if the reserved BAR is also a 64-bit BAR, then the next BAR shouldn't be returned (since 64-bit BAR uses two BARs). Make pci_epc_get_first_free_bar() take into account 64 bit BAR while returning the first free unreserved BAR. Signed-off-by: Kishon Vijay Abraham I --- drivers/pci/endpoint/pci-epc-core.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c index cadd3db0cbb0..25e57672e1a1 100644 --- a/drivers/pci/endpoint/pci-epc-core.c +++ b/drivers/pci/endpoint/pci-epc-core.c @@ -93,12 +93,20 @@ EXPORT_SYMBOL_GPL(pci_epc_get); unsigned int pci_epc_get_first_free_bar(const struct pci_epc_features *epc_features) { - int free_bar; + unsigned long free_bar; if (!epc_features) return 0; - free_bar = ffz(epc_features->reserved_bar); + /* Find if the reserved BAR is also a 64-bit BAR */ + free_bar = epc_features->reserved_bar & epc_features->bar_fixed_64bit; + + /* Set the adjacent bit if the reserved BAR is also a 64-bit BAR */ + free_bar <<= 1; + free_bar |= epc_features->reserved_bar; + + /* Now find the free BAR */ + free_bar = ffz(free_bar); if (free_bar > 5) return 0; From patchwork Wed Sep 30 15:35:04 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 1374460 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=lju6XZ1j; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4C1gMd48QYz9sSs for ; Thu, 1 Oct 2020 01:36:13 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728837AbgI3PgD (ORCPT ); Wed, 30 Sep 2020 11:36:03 -0400 Received: from fllv0016.ext.ti.com ([198.47.19.142]:47430 "EHLO fllv0016.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725823AbgI3Pf6 (ORCPT ); Wed, 30 Sep 2020 11:35:58 -0400 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by fllv0016.ext.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZk8I076424; Wed, 30 Sep 2020 10:35:46 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1601480147; bh=7qF2OVbWDyaTlnP441W+A6WtQychKbyb9MpcDopQVLo=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=lju6XZ1jACEZQ4BK3XwBvd+v16dEHZ5SiKT/b+OQ9k2mZEUCBC4HmSZYb3Va9ELov 3g7UjErR3nbR5bqx+xJilDXu0YgIcgi+OKMRlZ16ncUaxyVclRs3tLkyFizZ5C2NT1 iJ8XjmkMXmj/16JOK9PqNSTXTk/UzRyGOvjAW8RE= Received: from DFLE105.ent.ti.com (dfle105.ent.ti.com [10.64.6.26]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 08UFZkkA023128 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 30 Sep 2020 10:35:46 -0500 Received: from DFLE109.ent.ti.com (10.64.6.30) by DFLE105.ent.ti.com (10.64.6.26) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 30 Sep 2020 10:35:46 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DFLE109.ent.ti.com (10.64.6.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 30 Sep 2020 10:35:46 -0500 Received: from a0393678-ssd.dal.design.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZLZS033254; Wed, 30 Sep 2020 10:35:42 -0500 From: Kishon Vijay Abraham I To: Bjorn Helgaas , Jonathan Corbet , Kishon Vijay Abraham I , Lorenzo Pieralisi , Arnd Bergmann , Jon Mason , Dave Jiang , Allen Hubbe , Tom Joseph , Rob Herring CC: Greg Kroah-Hartman , , , , Subject: [PATCH v7 03/18] PCI: endpoint: Add helper API to get the 'next' unreserved BAR Date: Wed, 30 Sep 2020 21:05:04 +0530 Message-ID: <20200930153519.7282-4-kishon@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200930153519.7282-1-kishon@ti.com> References: <20200930153519.7282-1-kishon@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Add an API to get the next unreserved BAR starting from a given BAR number that can be used by the endpoint function. Signed-off-by: Kishon Vijay Abraham I --- drivers/pci/endpoint/pci-epc-core.c | 26 ++++++++++++++++++++++---- include/linux/pci-epc.h | 2 ++ 2 files changed, 24 insertions(+), 4 deletions(-) diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c index 25e57672e1a1..1afe5d9afb0d 100644 --- a/drivers/pci/endpoint/pci-epc-core.c +++ b/drivers/pci/endpoint/pci-epc-core.c @@ -87,17 +87,36 @@ EXPORT_SYMBOL_GPL(pci_epc_get); * pci_epc_get_first_free_bar() - helper to get first unreserved BAR * @epc_features: pci_epc_features structure that holds the reserved bar bitmap * - * Invoke to get the first unreserved BAR that can be used for endpoint + * Invoke to get the first unreserved BAR that can be used by the endpoint * function. For any incorrect value in reserved_bar return '0'. */ unsigned int pci_epc_get_first_free_bar(const struct pci_epc_features *epc_features) +{ + return pci_epc_get_next_free_bar(epc_features, BAR_0); +} +EXPORT_SYMBOL_GPL(pci_epc_get_first_free_bar); + +/** + * pci_epc_get_next_free_bar() - helper to get unreserved BAR starting from @bar + * @epc_features: pci_epc_features structure that holds the reserved bar bitmap + * @bar: the starting BAR number from where unreserved BAR should be searched + * + * Invoke to get the next unreserved BAR starting from @bar that can be used + * for endpoint function. For any incorrect value in reserved_bar return '0'. + */ +unsigned int pci_epc_get_next_free_bar(const struct pci_epc_features + *epc_features, enum pci_barno bar) { unsigned long free_bar; if (!epc_features) return 0; + /* If 'bar - 1' is a 64-bit BAR, move to the next BAR */ + if ((epc_features->bar_fixed_64bit << 1) & 1 << bar) + bar++; + /* Find if the reserved BAR is also a 64-bit BAR */ free_bar = epc_features->reserved_bar & epc_features->bar_fixed_64bit; @@ -105,14 +124,13 @@ unsigned int pci_epc_get_first_free_bar(const struct pci_epc_features free_bar <<= 1; free_bar |= epc_features->reserved_bar; - /* Now find the free BAR */ - free_bar = ffz(free_bar); + free_bar = find_next_zero_bit(&free_bar, 6, bar); if (free_bar > 5) return 0; return free_bar; } -EXPORT_SYMBOL_GPL(pci_epc_get_first_free_bar); +EXPORT_SYMBOL_GPL(pci_epc_get_next_free_bar); /** * pci_epc_get_features() - get the features supported by EPC diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h index cc66bec8be90..cfe9b427e6b7 100644 --- a/include/linux/pci-epc.h +++ b/include/linux/pci-epc.h @@ -203,6 +203,8 @@ const struct pci_epc_features *pci_epc_get_features(struct pci_epc *epc, u8 func_no); unsigned int pci_epc_get_first_free_bar(const struct pci_epc_features *epc_features); +unsigned int pci_epc_get_next_free_bar(const struct pci_epc_features + *epc_features, enum pci_barno bar); struct pci_epc *pci_epc_get(const char *epc_name); void pci_epc_put(struct pci_epc *epc); From patchwork Wed Sep 30 15:35:05 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 1374459 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=LHuUsW/F; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4C1gMc0MkSz9sSt for ; Thu, 1 Oct 2020 01:36:12 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1725823AbgI3PgH (ORCPT ); Wed, 30 Sep 2020 11:36:07 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:56958 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728724AbgI3PgG (ORCPT ); Wed, 30 Sep 2020 11:36:06 -0400 Received: from fllv0035.itg.ti.com ([10.64.41.0]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZq97043540; Wed, 30 Sep 2020 10:35:52 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1601480152; bh=3vpCkC7uFlZ+YibeWVFAIXOSzm64dBgudr4jQOKgpzg=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=LHuUsW/Fp5G6JjW7EndSTkmINOtXjfmSXx5s6pf2m7RNnbXlfbCc2WabEi73mXioZ GtJVzwPLu7UjCvpsruD4g9Q4ht+KQBZkGtTCeLLoXGNdVPUsVWv8vCqZC3dZ3oebeS 7A0BvOUZIJw2xAah5PoWNLc8awJgHIMBwVWcpqpo= Received: from DLEE107.ent.ti.com (dlee107.ent.ti.com [157.170.170.37]) by fllv0035.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZqfx029910; Wed, 30 Sep 2020 10:35:52 -0500 Received: from DLEE106.ent.ti.com (157.170.170.36) by DLEE107.ent.ti.com (157.170.170.37) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 30 Sep 2020 10:35:52 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DLEE106.ent.ti.com (157.170.170.36) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 30 Sep 2020 10:35:52 -0500 Received: from a0393678-ssd.dal.design.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZLZT033254; Wed, 30 Sep 2020 10:35:47 -0500 From: Kishon Vijay Abraham I To: Bjorn Helgaas , Jonathan Corbet , Kishon Vijay Abraham I , Lorenzo Pieralisi , Arnd Bergmann , Jon Mason , Dave Jiang , Allen Hubbe , Tom Joseph , Rob Herring CC: Greg Kroah-Hartman , , , , Subject: [PATCH v7 04/18] PCI: endpoint: Make *_free_bar() to return error codes on failure Date: Wed, 30 Sep 2020 21:05:05 +0530 Message-ID: <20200930153519.7282-5-kishon@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200930153519.7282-1-kishon@ti.com> References: <20200930153519.7282-1-kishon@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Modify pci_epc_get_next_free_bar() and pci_epc_get_first_free_bar() to return error values if there are no free BARs available. Signed-off-by: Kishon Vijay Abraham I --- drivers/pci/endpoint/functions/pci-epf-test.c | 2 ++ drivers/pci/endpoint/pci-epc-core.c | 12 ++++++------ include/linux/pci-epc.h | 8 ++++---- include/linux/pci-epf.h | 1 + 4 files changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c index e4e51d884553..7a1f3abfde48 100644 --- a/drivers/pci/endpoint/functions/pci-epf-test.c +++ b/drivers/pci/endpoint/functions/pci-epf-test.c @@ -834,6 +834,8 @@ static int pci_epf_test_bind(struct pci_epf *epf) linkup_notifier = epc_features->linkup_notifier; core_init_notifier = epc_features->core_init_notifier; test_reg_bar = pci_epc_get_first_free_bar(epc_features); + if (test_reg_bar < 0) + return -EINVAL; pci_epf_configure_bar(epf, epc_features); } diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c index 1afe5d9afb0d..ea7e7465ce7a 100644 --- a/drivers/pci/endpoint/pci-epc-core.c +++ b/drivers/pci/endpoint/pci-epc-core.c @@ -90,8 +90,8 @@ EXPORT_SYMBOL_GPL(pci_epc_get); * Invoke to get the first unreserved BAR that can be used by the endpoint * function. For any incorrect value in reserved_bar return '0'. */ -unsigned int pci_epc_get_first_free_bar(const struct pci_epc_features - *epc_features) +enum pci_barno +pci_epc_get_first_free_bar(const struct pci_epc_features *epc_features) { return pci_epc_get_next_free_bar(epc_features, BAR_0); } @@ -105,13 +105,13 @@ EXPORT_SYMBOL_GPL(pci_epc_get_first_free_bar); * Invoke to get the next unreserved BAR starting from @bar that can be used * for endpoint function. For any incorrect value in reserved_bar return '0'. */ -unsigned int pci_epc_get_next_free_bar(const struct pci_epc_features - *epc_features, enum pci_barno bar) +enum pci_barno pci_epc_get_next_free_bar(const struct pci_epc_features + *epc_features, enum pci_barno bar) { unsigned long free_bar; if (!epc_features) - return 0; + return BAR_0; /* If 'bar - 1' is a 64-bit BAR, move to the next BAR */ if ((epc_features->bar_fixed_64bit << 1) & 1 << bar) @@ -126,7 +126,7 @@ unsigned int pci_epc_get_next_free_bar(const struct pci_epc_features free_bar = find_next_zero_bit(&free_bar, 6, bar); if (free_bar > 5) - return 0; + return NO_BAR; return free_bar; } diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h index cfe9b427e6b7..88d311bad984 100644 --- a/include/linux/pci-epc.h +++ b/include/linux/pci-epc.h @@ -201,10 +201,10 @@ int pci_epc_start(struct pci_epc *epc); void pci_epc_stop(struct pci_epc *epc); const struct pci_epc_features *pci_epc_get_features(struct pci_epc *epc, u8 func_no); -unsigned int pci_epc_get_first_free_bar(const struct pci_epc_features - *epc_features); -unsigned int pci_epc_get_next_free_bar(const struct pci_epc_features - *epc_features, enum pci_barno bar); +enum pci_barno +pci_epc_get_first_free_bar(const struct pci_epc_features *epc_features); +enum pci_barno pci_epc_get_next_free_bar(const struct pci_epc_features + *epc_features, enum pci_barno bar); struct pci_epc *pci_epc_get(const char *epc_name); void pci_epc_put(struct pci_epc *epc); diff --git a/include/linux/pci-epf.h b/include/linux/pci-epf.h index 6644ff3b0702..fa3aca43eb19 100644 --- a/include/linux/pci-epf.h +++ b/include/linux/pci-epf.h @@ -21,6 +21,7 @@ enum pci_notify_event { }; enum pci_barno { + NO_BAR = -1, BAR_0, BAR_1, BAR_2, From patchwork Wed Sep 30 15:35:06 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 1374461 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=ntfsQa5h; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4C1gMj0fVtz9sSt for ; Thu, 1 Oct 2020 01:36:17 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731012AbgI3PgM (ORCPT ); Wed, 30 Sep 2020 11:36:12 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:56984 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728724AbgI3PgJ (ORCPT ); Wed, 30 Sep 2020 11:36:09 -0400 Received: from fllv0035.itg.ti.com ([10.64.41.0]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZw1r043561; Wed, 30 Sep 2020 10:35:58 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1601480158; bh=WCJiTCBYarku1p+J3FGwyc0AS5UhsiZgThHHJxu9xzA=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=ntfsQa5h/lLfxnabWlgmWw1jD7wvGF7ANkQLxiq6TxWZCS0ooJU/ceDKBkegMaLA5 wF+vFpwQm1N9sBUvD0sLNDzTPjI/PrkBotq7vR/8xtOyE+EK47JGOLh3OLA1JyYyow NK0eKR9E1KJ1cuyUbY43vz1Tj/psV5Hwd0N8o7bc= Received: from DFLE105.ent.ti.com (dfle105.ent.ti.com [10.64.6.26]) by fllv0035.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZwkO029960; Wed, 30 Sep 2020 10:35:58 -0500 Received: from DFLE108.ent.ti.com (10.64.6.29) by DFLE105.ent.ti.com (10.64.6.26) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 30 Sep 2020 10:35:57 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DFLE108.ent.ti.com (10.64.6.29) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 30 Sep 2020 10:35:57 -0500 Received: from a0393678-ssd.dal.design.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZLZU033254; Wed, 30 Sep 2020 10:35:52 -0500 From: Kishon Vijay Abraham I To: Bjorn Helgaas , Jonathan Corbet , Kishon Vijay Abraham I , Lorenzo Pieralisi , Arnd Bergmann , Jon Mason , Dave Jiang , Allen Hubbe , Tom Joseph , Rob Herring CC: Greg Kroah-Hartman , , , , Subject: [PATCH v7 05/18] PCI: endpoint: Remove unused pci_epf_match_device() Date: Wed, 30 Sep 2020 21:05:06 +0530 Message-ID: <20200930153519.7282-6-kishon@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200930153519.7282-1-kishon@ti.com> References: <20200930153519.7282-1-kishon@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Remove unused pci_epf_match_device() function added in pci-epf-core.c Signed-off-by: Kishon Vijay Abraham I --- drivers/pci/endpoint/pci-epf-core.c | 16 ---------------- include/linux/pci-epf.h | 2 -- 2 files changed, 18 deletions(-) diff --git a/drivers/pci/endpoint/pci-epf-core.c b/drivers/pci/endpoint/pci-epf-core.c index c977cf9dce56..e44a317a2a2a 100644 --- a/drivers/pci/endpoint/pci-epf-core.c +++ b/drivers/pci/endpoint/pci-epf-core.c @@ -282,22 +282,6 @@ struct pci_epf *pci_epf_create(const char *name) } EXPORT_SYMBOL_GPL(pci_epf_create); -const struct pci_epf_device_id * -pci_epf_match_device(const struct pci_epf_device_id *id, struct pci_epf *epf) -{ - if (!id || !epf) - return NULL; - - while (*id->name) { - if (strcmp(epf->name, id->name) == 0) - return id; - id++; - } - - return NULL; -} -EXPORT_SYMBOL_GPL(pci_epf_match_device); - static void pci_epf_dev_release(struct device *dev) { struct pci_epf *epf = to_pci_epf(dev); diff --git a/include/linux/pci-epf.h b/include/linux/pci-epf.h index fa3aca43eb19..f373a134ac04 100644 --- a/include/linux/pci-epf.h +++ b/include/linux/pci-epf.h @@ -165,8 +165,6 @@ static inline void *epf_get_drvdata(struct pci_epf *epf) return dev_get_drvdata(&epf->dev); } -const struct pci_epf_device_id * -pci_epf_match_device(const struct pci_epf_device_id *id, struct pci_epf *epf); struct pci_epf *pci_epf_create(const char *name); void pci_epf_destroy(struct pci_epf *epf); int __pci_epf_register_driver(struct pci_epf_driver *driver, From patchwork Wed Sep 30 15:35:07 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 1374462 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=E5FYtY6x; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4C1gMp58mfz9sSG for ; Thu, 1 Oct 2020 01:36:22 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730104AbgI3PgU (ORCPT ); Wed, 30 Sep 2020 11:36:20 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:57008 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726540AbgI3PgT (ORCPT ); Wed, 30 Sep 2020 11:36:19 -0400 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 08UFa305043583; Wed, 30 Sep 2020 10:36:03 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1601480163; bh=rM/zpyHLYwR6kMK4GfVsk4cqjPUlNqYX8ihj39HgGU0=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=E5FYtY6x4KcSICKBUJk1HzGH2P3Y69yfVrrcVgDYyqtANPiTA/k/FrgZJwh0UYlb3 Xxs6+ESCWaQMJioepRyYV5vadbjihb26bVH4XYXNrkNlZb7aNgtNhK6XjZFIKdhmHm PUhsqCapGNE1GTajQHgLdlBGcvfKHuzXH5dScnXg= Received: from DFLE102.ent.ti.com (dfle102.ent.ti.com [10.64.6.23]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 08UFa3Wf023597 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 30 Sep 2020 10:36:03 -0500 Received: from DFLE112.ent.ti.com (10.64.6.33) by DFLE102.ent.ti.com (10.64.6.23) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 30 Sep 2020 10:36:03 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DFLE112.ent.ti.com (10.64.6.33) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 30 Sep 2020 10:36:03 -0500 Received: from a0393678-ssd.dal.design.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZLZV033254; Wed, 30 Sep 2020 10:35:58 -0500 From: Kishon Vijay Abraham I To: Bjorn Helgaas , Jonathan Corbet , Kishon Vijay Abraham I , Lorenzo Pieralisi , Arnd Bergmann , Jon Mason , Dave Jiang , Allen Hubbe , Tom Joseph , Rob Herring CC: Greg Kroah-Hartman , , , , Subject: [PATCH v7 06/18] PCI: endpoint: Add support to associate secondary EPC with EPF Date: Wed, 30 Sep 2020 21:05:07 +0530 Message-ID: <20200930153519.7282-7-kishon@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200930153519.7282-1-kishon@ti.com> References: <20200930153519.7282-1-kishon@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org In the case of standard endpoint functions, only one endpoint controller (EPC) will be associated with an endpoint function (EPF). However for providing NTB (non transparent bridge) functionality, two EPCs should be associated with a single EPF. Add support to associate secondary EPC with EPF. This is in preparation for adding NTB endpoint function driver. Signed-off-by: Kishon Vijay Abraham I --- drivers/pci/endpoint/functions/pci-epf-test.c | 11 ++-- drivers/pci/endpoint/pci-ep-cfs.c | 6 +- drivers/pci/endpoint/pci-epc-core.c | 47 +++++++++++---- drivers/pci/endpoint/pci-epf-core.c | 57 +++++++++++++------ include/linux/pci-epc.h | 25 +++++++- include/linux/pci-epf.h | 17 +++++- 6 files changed, 125 insertions(+), 38 deletions(-) diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c index 7a1f3abfde48..c0ac4e9cbe72 100644 --- a/drivers/pci/endpoint/functions/pci-epf-test.c +++ b/drivers/pci/endpoint/functions/pci-epf-test.c @@ -619,7 +619,8 @@ static void pci_epf_test_unbind(struct pci_epf *epf) if (epf_test->reg[bar]) { pci_epc_clear_bar(epc, epf->func_no, epf_bar); - pci_epf_free_space(epf, epf_test->reg[bar], bar); + pci_epf_free_space(epf, epf_test->reg[bar], bar, + PRIMARY_INTERFACE); } } } @@ -651,7 +652,8 @@ static int pci_epf_test_set_bar(struct pci_epf *epf) ret = pci_epc_set_bar(epc, epf->func_no, epf_bar); if (ret) { - pci_epf_free_space(epf, epf_test->reg[bar], bar); + pci_epf_free_space(epf, epf_test->reg[bar], bar, + PRIMARY_INTERFACE); dev_err(dev, "Failed to set BAR%d\n", bar); if (bar == test_reg_bar) return ret; @@ -771,7 +773,7 @@ static int pci_epf_test_alloc_space(struct pci_epf *epf) } base = pci_epf_alloc_space(epf, test_reg_size, test_reg_bar, - epc_features->align); + epc_features->align, PRIMARY_INTERFACE); if (!base) { dev_err(dev, "Failed to allocated register space\n"); return -ENOMEM; @@ -789,7 +791,8 @@ static int pci_epf_test_alloc_space(struct pci_epf *epf) continue; base = pci_epf_alloc_space(epf, bar_size[bar], bar, - epc_features->align); + epc_features->align, + PRIMARY_INTERFACE); if (!base) dev_err(dev, "Failed to allocate space for BAR%d\n", bar); diff --git a/drivers/pci/endpoint/pci-ep-cfs.c b/drivers/pci/endpoint/pci-ep-cfs.c index 3710adf51912..6ca9e2f92460 100644 --- a/drivers/pci/endpoint/pci-ep-cfs.c +++ b/drivers/pci/endpoint/pci-ep-cfs.c @@ -94,13 +94,13 @@ static int pci_epc_epf_link(struct config_item *epc_item, struct pci_epc *epc = epc_group->epc; struct pci_epf *epf = epf_group->epf; - ret = pci_epc_add_epf(epc, epf); + ret = pci_epc_add_epf(epc, epf, PRIMARY_INTERFACE); if (ret) return ret; ret = pci_epf_bind(epf); if (ret) { - pci_epc_remove_epf(epc, epf); + pci_epc_remove_epf(epc, epf, PRIMARY_INTERFACE); return ret; } @@ -120,7 +120,7 @@ static void pci_epc_epf_unlink(struct config_item *epc_item, epc = epc_group->epc; epf = epf_group->epf; pci_epf_unbind(epf); - pci_epc_remove_epf(epc, epf); + pci_epc_remove_epf(epc, epf, PRIMARY_INTERFACE); } static struct configfs_item_operations pci_epc_item_ops = { diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c index ea7e7465ce7a..3693eca5b030 100644 --- a/drivers/pci/endpoint/pci-epc-core.c +++ b/drivers/pci/endpoint/pci-epc-core.c @@ -493,21 +493,28 @@ EXPORT_SYMBOL_GPL(pci_epc_write_header); * pci_epc_add_epf() - bind PCI endpoint function to an endpoint controller * @epc: the EPC device to which the endpoint function should be added * @epf: the endpoint function to be added + * @type: Identifies if the EPC is connected to the primary or secondary + * interface of EPF * * A PCI endpoint device can have one or more functions. In the case of PCIe, * the specification allows up to 8 PCIe endpoint functions. Invoke * pci_epc_add_epf() to add a PCI endpoint function to an endpoint controller. */ -int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf) +int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf, + enum pci_epc_interface_type type) { + struct list_head *list; u32 func_no; int ret = 0; - if (epf->epc) + if (IS_ERR_OR_NULL(epc)) + return -EINVAL; + + if (type == PRIMARY_INTERFACE && epf->epc) return -EBUSY; - if (IS_ERR(epc)) - return -EINVAL; + if (type == SECONDARY_INTERFACE && epf->sec_epc) + return -EBUSY; mutex_lock(&epc->lock); func_no = find_first_zero_bit(&epc->function_num_map, @@ -524,11 +531,17 @@ int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf) } set_bit(func_no, &epc->function_num_map); - epf->func_no = func_no; - epf->epc = epc; - - list_add_tail(&epf->list, &epc->pci_epf); + if (type == PRIMARY_INTERFACE) { + epf->func_no = func_no; + epf->epc = epc; + list = &epf->list; + } else { + epf->sec_epc_func_no = func_no; + epf->sec_epc = epc; + list = &epf->sec_epc_list; + } + list_add_tail(list, &epc->pci_epf); ret: mutex_unlock(&epc->lock); @@ -543,14 +556,26 @@ EXPORT_SYMBOL_GPL(pci_epc_add_epf); * * Invoke to remove PCI endpoint function from the endpoint controller. */ -void pci_epc_remove_epf(struct pci_epc *epc, struct pci_epf *epf) +void pci_epc_remove_epf(struct pci_epc *epc, struct pci_epf *epf, + enum pci_epc_interface_type type) { + struct list_head *list; + u32 func_no = 0; + if (!epc || IS_ERR(epc) || !epf) return; + if (type == PRIMARY_INTERFACE) { + func_no = epf->func_no; + list = &epf->list; + } else { + func_no = epf->sec_epc_func_no; + list = &epf->sec_epc_list; + } + mutex_lock(&epc->lock); - clear_bit(epf->func_no, &epc->function_num_map); - list_del(&epf->list); + clear_bit(func_no, &epc->function_num_map); + list_del(list); epf->epc = NULL; mutex_unlock(&epc->lock); } diff --git a/drivers/pci/endpoint/pci-epf-core.c b/drivers/pci/endpoint/pci-epf-core.c index e44a317a2a2a..79329ec6373c 100644 --- a/drivers/pci/endpoint/pci-epf-core.c +++ b/drivers/pci/endpoint/pci-epf-core.c @@ -74,24 +74,37 @@ EXPORT_SYMBOL_GPL(pci_epf_bind); * @epf: the EPF device from whom to free the memory * @addr: the virtual address of the PCI EPF register space * @bar: the BAR number corresponding to the register space + * @type: Identifies if the allocated space is for primary EPC or secondary EPC * * Invoke to free the allocated PCI EPF register space. */ -void pci_epf_free_space(struct pci_epf *epf, void *addr, enum pci_barno bar) +void pci_epf_free_space(struct pci_epf *epf, void *addr, enum pci_barno bar, + enum pci_epc_interface_type type) { struct device *dev = epf->epc->dev.parent; + struct pci_epf_bar *epf_bar; + struct pci_epc *epc; if (!addr) return; - dma_free_coherent(dev, epf->bar[bar].size, addr, - epf->bar[bar].phys_addr); + if (type == PRIMARY_INTERFACE) { + epc = epf->epc; + epf_bar = epf->bar; + } else { + epc = epf->sec_epc; + epf_bar = epf->sec_epc_bar; + } + + dev = epc->dev.parent; + dma_free_coherent(dev, epf_bar[bar].size, addr, + epf_bar[bar].phys_addr); - epf->bar[bar].phys_addr = 0; - epf->bar[bar].addr = NULL; - epf->bar[bar].size = 0; - epf->bar[bar].barno = 0; - epf->bar[bar].flags = 0; + epf_bar[bar].phys_addr = 0; + epf_bar[bar].addr = NULL; + epf_bar[bar].size = 0; + epf_bar[bar].barno = 0; + epf_bar[bar].flags = 0; } EXPORT_SYMBOL_GPL(pci_epf_free_space); @@ -101,15 +114,18 @@ EXPORT_SYMBOL_GPL(pci_epf_free_space); * @size: the size of the memory that has to be allocated * @bar: the BAR number corresponding to the allocated register space * @align: alignment size for the allocation region + * @type: Identifies if the allocation is for primary EPC or secondary EPC * * Invoke to allocate memory for the PCI EPF register space. */ void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar, - size_t align) + size_t align, enum pci_epc_interface_type type) { - void *space; - struct device *dev = epf->epc->dev.parent; + struct pci_epf_bar *epf_bar; dma_addr_t phys_addr; + struct pci_epc *epc; + struct device *dev; + void *space; if (size < 128) size = 128; @@ -119,17 +135,26 @@ void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar, else size = roundup_pow_of_two(size); + if (type == PRIMARY_INTERFACE) { + epc = epf->epc; + epf_bar = epf->bar; + } else { + epc = epf->sec_epc; + epf_bar = epf->sec_epc_bar; + } + + dev = epc->dev.parent; space = dma_alloc_coherent(dev, size, &phys_addr, GFP_KERNEL); if (!space) { dev_err(dev, "failed to allocate mem space\n"); return NULL; } - epf->bar[bar].phys_addr = phys_addr; - epf->bar[bar].addr = space; - epf->bar[bar].size = size; - epf->bar[bar].barno = bar; - epf->bar[bar].flags |= upper_32_bits(size) ? + epf_bar[bar].phys_addr = phys_addr; + epf_bar[bar].addr = space; + epf_bar[bar].size = size; + epf_bar[bar].barno = bar; + epf_bar[bar].flags |= upper_32_bits(size) ? PCI_BASE_ADDRESS_MEM_TYPE_64 : PCI_BASE_ADDRESS_MEM_TYPE_32; diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h index 88d311bad984..d9cb3944fb87 100644 --- a/include/linux/pci-epc.h +++ b/include/linux/pci-epc.h @@ -13,6 +13,12 @@ struct pci_epc; +enum pci_epc_interface_type { + UNKNOWN_INTERFACE = -1, + PRIMARY_INTERFACE, + SECONDARY_INTERFACE, +}; + enum pci_epc_irq_type { PCI_EPC_IRQ_UNKNOWN, PCI_EPC_IRQ_LEGACY, @@ -20,6 +26,19 @@ enum pci_epc_irq_type { PCI_EPC_IRQ_MSIX, }; +static inline const char * +pci_epc_interface_string(enum pci_epc_interface_type type) +{ + switch (type) { + case PRIMARY_INTERFACE: + return "primary"; + case SECONDARY_INTERFACE: + return "secondary"; + default: + return "UNKNOWN interface"; + } +} + /** * struct pci_epc_ops - set of function pointers for performing EPC operations * @write_header: ops to populate configuration space header @@ -175,10 +194,12 @@ __pci_epc_create(struct device *dev, const struct pci_epc_ops *ops, struct module *owner); void devm_pci_epc_destroy(struct device *dev, struct pci_epc *epc); void pci_epc_destroy(struct pci_epc *epc); -int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf); +int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf, + enum pci_epc_interface_type type); void pci_epc_linkup(struct pci_epc *epc); void pci_epc_init_notify(struct pci_epc *epc); -void pci_epc_remove_epf(struct pci_epc *epc, struct pci_epf *epf); +void pci_epc_remove_epf(struct pci_epc *epc, struct pci_epf *epf, + enum pci_epc_interface_type type); int pci_epc_write_header(struct pci_epc *epc, u8 func_no, struct pci_epf_header *hdr); int pci_epc_set_bar(struct pci_epc *epc, u8 func_no, diff --git a/include/linux/pci-epf.h b/include/linux/pci-epf.h index f373a134ac04..1dc66824f5a8 100644 --- a/include/linux/pci-epf.h +++ b/include/linux/pci-epf.h @@ -14,6 +14,7 @@ #include struct pci_epf; +enum pci_epc_interface_type; enum pci_notify_event { CORE_INIT, @@ -119,6 +120,11 @@ struct pci_epf_bar { * @list: to add pci_epf as a list of PCI endpoint functions to pci_epc * @nb: notifier block to notify EPF of any EPC events (like linkup) * @lock: mutex to protect pci_epf_ops + * @sec_epc: the secondary EPC device to which this EPF device is bound + * @sec_epc_list: to add pci_epf as list of PCI endpoint functions to secondary + * EPC device + * @sec_epc_bar: represents the BAR of EPF device associated with secondary EPC + * @sec_epc_func_no: unique (physical) function number within the secondary EPC */ struct pci_epf { struct device dev; @@ -135,6 +141,12 @@ struct pci_epf { struct notifier_block nb; /* mutex to protect against concurrent access of pci_epf_ops */ struct mutex lock; + + /* Below members are to attach secondary EPC to an endpoint function */ + struct pci_epc *sec_epc; + struct list_head sec_epc_list; + struct pci_epf_bar sec_epc_bar[6]; + u8 sec_epc_func_no; }; /** @@ -171,8 +183,9 @@ int __pci_epf_register_driver(struct pci_epf_driver *driver, struct module *owner); void pci_epf_unregister_driver(struct pci_epf_driver *driver); void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar, - size_t align); -void pci_epf_free_space(struct pci_epf *epf, void *addr, enum pci_barno bar); + size_t align, enum pci_epc_interface_type type); +void pci_epf_free_space(struct pci_epf *epf, void *addr, enum pci_barno bar, + enum pci_epc_interface_type type); int pci_epf_bind(struct pci_epf *epf); void pci_epf_unbind(struct pci_epf *epf); #endif /* __LINUX_PCI_EPF_H */ From patchwork Wed Sep 30 15:35:08 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 1374463 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=GjIfqWBC; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4C1gN515zWz9sSn for ; Thu, 1 Oct 2020 01:36:37 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1725814AbgI3Pgc (ORCPT ); Wed, 30 Sep 2020 11:36:32 -0400 Received: from fllv0016.ext.ti.com ([198.47.19.142]:47540 "EHLO fllv0016.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725372AbgI3Pgb (ORCPT ); Wed, 30 Sep 2020 11:36:31 -0400 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by fllv0016.ext.ti.com (8.15.2/8.15.2) with ESMTP id 08UFaHED076608; Wed, 30 Sep 2020 10:36:17 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1601480177; bh=z3Tw9eXfcOK90ruy3aMeRyVdcSzDrEL/G+eXeTQ/vG0=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=GjIfqWBCmFwNJale9KF6i5o7bJIZExlNFNaAsFHe0OYnr+gigMOmdgqUsQXR5F4Oj CXNJEO+xDYQa67O/3tTVJqpu+ceRW/j4K9NtmWl/vRDrB2IQF4RQBPNPInZglYVozt D1JOJXVT6lcrZ9/vQgzvMqY9+l5iAE+63YhdaPxo= Received: from DLEE106.ent.ti.com (dlee106.ent.ti.com [157.170.170.36]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 08UFaH3p024387 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 30 Sep 2020 10:36:17 -0500 Received: from DLEE100.ent.ti.com (157.170.170.30) by DLEE106.ent.ti.com (157.170.170.36) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 30 Sep 2020 10:36:17 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DLEE100.ent.ti.com (157.170.170.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 30 Sep 2020 10:36:17 -0500 Received: from a0393678-ssd.dal.design.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZLZW033254; Wed, 30 Sep 2020 10:36:03 -0500 From: Kishon Vijay Abraham I To: Bjorn Helgaas , Jonathan Corbet , Kishon Vijay Abraham I , Lorenzo Pieralisi , Arnd Bergmann , Jon Mason , Dave Jiang , Allen Hubbe , Tom Joseph , Rob Herring CC: Greg Kroah-Hartman , , , , Subject: [PATCH v7 07/18] PCI: endpoint: Add support in configfs to associate two EPCs with EPF Date: Wed, 30 Sep 2020 21:05:08 +0530 Message-ID: <20200930153519.7282-8-kishon@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200930153519.7282-1-kishon@ti.com> References: <20200930153519.7282-1-kishon@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Now that PCI endpoint core supports to add secondary endpoint controller (EPC) with endpoint function (EPF), Add support in configfs to associate two EPCs with EPF. This creates "primary" and "secondary" directory inside the directory created by users for EPF device. Users have to add a symlink of endpoint controller (pci_ep/controllers/) to "primary" or "secondary" directory to bind EPF to primary and secondary EPF interfaces respectively. Existing method of linking directory representing EPF device to directory representing EPC device to associate a single EPC device with a EPF device will continue to work. Signed-off-by: Kishon Vijay Abraham I --- .../PCI/endpoint/pci-endpoint-cfs.rst | 10 ++ drivers/pci/endpoint/pci-ep-cfs.c | 147 ++++++++++++++++++ 2 files changed, 157 insertions(+) diff --git a/Documentation/PCI/endpoint/pci-endpoint-cfs.rst b/Documentation/PCI/endpoint/pci-endpoint-cfs.rst index 1bbd81ed06c8..696f8eeb4738 100644 --- a/Documentation/PCI/endpoint/pci-endpoint-cfs.rst +++ b/Documentation/PCI/endpoint/pci-endpoint-cfs.rst @@ -68,6 +68,16 @@ created) ... subsys_vendor_id ... subsys_id ... interrupt_pin + ... primary/ + ... / + ... secondary/ + ... / + +If an EPF device has to be associated with 2 EPCs (like in the case of +Non-transparent bridge), symlink of endpoint controller connected to primary +interface should be added in 'primary' directory and symlink of endpoint +controller connected to secondary interface should be added in 'secondary' +directory. EPC Device ========== diff --git a/drivers/pci/endpoint/pci-ep-cfs.c b/drivers/pci/endpoint/pci-ep-cfs.c index 6ca9e2f92460..8f750961d6ab 100644 --- a/drivers/pci/endpoint/pci-ep-cfs.c +++ b/drivers/pci/endpoint/pci-ep-cfs.c @@ -21,6 +21,9 @@ static struct config_group *controllers_group; struct pci_epf_group { struct config_group group; + struct config_group primary_epc_group; + struct config_group secondary_epc_group; + struct delayed_work cfs_work; struct pci_epf *epf; int index; }; @@ -41,6 +44,127 @@ static inline struct pci_epc_group *to_pci_epc_group(struct config_item *item) return container_of(to_config_group(item), struct pci_epc_group, group); } +static int pci_secondary_epc_epf_link(struct config_item *epf_item, + struct config_item *epc_item) +{ + int ret; + struct pci_epf_group *epf_group = to_pci_epf_group(epf_item->ci_parent); + struct pci_epc_group *epc_group = to_pci_epc_group(epc_item); + struct pci_epc *epc = epc_group->epc; + struct pci_epf *epf = epf_group->epf; + + ret = pci_epc_add_epf(epc, epf, SECONDARY_INTERFACE); + if (ret) + return ret; + + ret = pci_epf_bind(epf); + if (ret) { + pci_epc_remove_epf(epc, epf, SECONDARY_INTERFACE); + return ret; + } + + return 0; +} + +static void pci_secondary_epc_epf_unlink(struct config_item *epc_item, + struct config_item *epf_item) +{ + struct pci_epf_group *epf_group = to_pci_epf_group(epf_item->ci_parent); + struct pci_epc_group *epc_group = to_pci_epc_group(epc_item); + struct pci_epc *epc; + struct pci_epf *epf; + + WARN_ON_ONCE(epc_group->start); + + epc = epc_group->epc; + epf = epf_group->epf; + pci_epf_unbind(epf); + pci_epc_remove_epf(epc, epf, SECONDARY_INTERFACE); +} + +static struct configfs_item_operations pci_secondary_epc_item_ops = { + .allow_link = pci_secondary_epc_epf_link, + .drop_link = pci_secondary_epc_epf_unlink, +}; + +static const struct config_item_type pci_secondary_epc_type = { + .ct_item_ops = &pci_secondary_epc_item_ops, + .ct_owner = THIS_MODULE, +}; + +static struct config_group +*pci_ep_cfs_add_secondary_group(struct pci_epf_group *epf_group) +{ + struct config_group *secondary_epc_group; + + secondary_epc_group = &epf_group->secondary_epc_group; + config_group_init_type_name(secondary_epc_group, "secondary", + &pci_secondary_epc_type); + configfs_register_group(&epf_group->group, secondary_epc_group); + + return secondary_epc_group; +} + +static int pci_primary_epc_epf_link(struct config_item *epf_item, + struct config_item *epc_item) +{ + int ret; + struct pci_epf_group *epf_group = to_pci_epf_group(epf_item->ci_parent); + struct pci_epc_group *epc_group = to_pci_epc_group(epc_item); + struct pci_epc *epc = epc_group->epc; + struct pci_epf *epf = epf_group->epf; + + ret = pci_epc_add_epf(epc, epf, PRIMARY_INTERFACE); + if (ret) + return ret; + + ret = pci_epf_bind(epf); + if (ret) { + pci_epc_remove_epf(epc, epf, PRIMARY_INTERFACE); + return ret; + } + + return 0; +} + +static void pci_primary_epc_epf_unlink(struct config_item *epc_item, + struct config_item *epf_item) +{ + struct pci_epf_group *epf_group = to_pci_epf_group(epf_item->ci_parent); + struct pci_epc_group *epc_group = to_pci_epc_group(epc_item); + struct pci_epc *epc; + struct pci_epf *epf; + + WARN_ON_ONCE(epc_group->start); + + epc = epc_group->epc; + epf = epf_group->epf; + pci_epf_unbind(epf); + pci_epc_remove_epf(epc, epf, PRIMARY_INTERFACE); +} + +static struct configfs_item_operations pci_primary_epc_item_ops = { + .allow_link = pci_primary_epc_epf_link, + .drop_link = pci_primary_epc_epf_unlink, +}; + +static const struct config_item_type pci_primary_epc_type = { + .ct_item_ops = &pci_primary_epc_item_ops, + .ct_owner = THIS_MODULE, +}; + +static struct config_group +*pci_ep_cfs_add_primary_group(struct pci_epf_group *epf_group) +{ + struct config_group *primary_epc_group = &epf_group->primary_epc_group; + + config_group_init_type_name(primary_epc_group, "primary", + &pci_primary_epc_type); + configfs_register_group(&epf_group->group, primary_epc_group); + + return primary_epc_group; +} + static ssize_t pci_epc_start_store(struct config_item *item, const char *page, size_t len) { @@ -372,6 +496,25 @@ static const struct config_item_type pci_epf_type = { .ct_owner = THIS_MODULE, }; +static void pci_epf_cfs_work(struct work_struct *work) +{ + struct pci_epf_group *epf_group; + struct config_group *group; + + epf_group = container_of(work, struct pci_epf_group, cfs_work.work); + group = pci_ep_cfs_add_primary_group(epf_group); + if (IS_ERR(group)) { + pr_err("failed to create 'primary' EPC interface\n"); + return; + } + + group = pci_ep_cfs_add_secondary_group(epf_group); + if (IS_ERR(group)) { + pr_err("failed to create 'secondary' EPC interface\n"); + return; + } +} + static struct config_group *pci_epf_make(struct config_group *group, const char *name) { @@ -414,6 +557,10 @@ static struct config_group *pci_epf_make(struct config_group *group, kfree(epf_name); + INIT_DELAYED_WORK(&epf_group->cfs_work, pci_epf_cfs_work); + queue_delayed_work(system_wq, &epf_group->cfs_work, + msecs_to_jiffies(1)); + return &epf_group->group; free_name: From patchwork Wed Sep 30 15:35:09 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 1374464 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=tvJRjhiA; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4C1gN72CQQz9sSn for ; Thu, 1 Oct 2020 01:36:39 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1725372AbgI3Pgi (ORCPT ); Wed, 30 Sep 2020 11:36:38 -0400 Received: from fllv0016.ext.ti.com ([198.47.19.142]:47590 "EHLO fllv0016.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728107AbgI3Pgf (ORCPT ); Wed, 30 Sep 2020 11:36:35 -0400 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by fllv0016.ext.ti.com (8.15.2/8.15.2) with ESMTP id 08UFaMTc076620; Wed, 30 Sep 2020 10:36:22 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1601480182; bh=nm506Ttw75QB9g3i8XfbJHgDWMXVATaPs9Pwq9jcU6c=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=tvJRjhiAM3L4lSy3Z8hJ3xTt4PQOMTrDS8BBsnoMWsyAzbwxm/qZtu6TjLIPY6K/L PJr4A57ETq7zSQ9NRZ8g9kv84xZB79uHt6IZVtvyRR2ZkB6QqtjpQBgQmLFrjz1RMc oDTI6t/UZa5KbHYtKwKfkkgmYFR6XbcRNJ671L/s= Received: from DFLE102.ent.ti.com (dfle102.ent.ti.com [10.64.6.23]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 08UFaMOw024460 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 30 Sep 2020 10:36:22 -0500 Received: from DFLE113.ent.ti.com (10.64.6.34) by DFLE102.ent.ti.com (10.64.6.23) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 30 Sep 2020 10:36:22 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DFLE113.ent.ti.com (10.64.6.34) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 30 Sep 2020 10:36:22 -0500 Received: from a0393678-ssd.dal.design.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZLZX033254; Wed, 30 Sep 2020 10:36:17 -0500 From: Kishon Vijay Abraham I To: Bjorn Helgaas , Jonathan Corbet , Kishon Vijay Abraham I , Lorenzo Pieralisi , Arnd Bergmann , Jon Mason , Dave Jiang , Allen Hubbe , Tom Joseph , Rob Herring CC: Greg Kroah-Hartman , , , , Subject: [PATCH v7 08/18] PCI: endpoint: Add pci_epc_ops to map MSI irq Date: Wed, 30 Sep 2020 21:05:09 +0530 Message-ID: <20200930153519.7282-9-kishon@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200930153519.7282-1-kishon@ti.com> References: <20200930153519.7282-1-kishon@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Add pci_epc_ops to map physical address to MSI address and return MSI data. The physical address is an address in the outbound region. This is required to implement doorbell functionality of NTB (non transparent bridge) wherein EPC on either side of the interface (primary and secondary) can directly write to the physical address (in outbound region) of the other interface to ring doorbell using MSI. Signed-off-by: Kishon Vijay Abraham I --- drivers/pci/endpoint/pci-epc-core.c | 41 +++++++++++++++++++++++++++++ include/linux/pci-epc.h | 8 ++++++ 2 files changed, 49 insertions(+) diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c index 3693eca5b030..cc8f9eb2b177 100644 --- a/drivers/pci/endpoint/pci-epc-core.c +++ b/drivers/pci/endpoint/pci-epc-core.c @@ -230,6 +230,47 @@ int pci_epc_raise_irq(struct pci_epc *epc, u8 func_no, } EXPORT_SYMBOL_GPL(pci_epc_raise_irq); +/** + * pci_epc_map_msi_irq() - Map physical address to MSI address and return + * MSI data + * @epc: the EPC device which has the MSI capability + * @func_no: the physical endpoint function number in the EPC device + * @phys_addr: the physical address of the outbound region + * @interrupt_num: the MSI interrupt number + * @entry_size: Size of Outbound address region for each interrupt + * @msi_data: the data that should be written in order to raise MSI interrupt + * with interrupt number as 'interrupt num' + * @msi_addr_offset: Offset of MSI address from the aligned outbound address + * to which the MSI address is mapped + * + * Invoke to map physical address to MSI address and return MSI data. The + * physical address should be an address in the outbound region. This is + * required to implement doorbell functionality of NTB wherein EPC on either + * side of the interface (primary and secondary) can directly write to the + * physical address (in outbound region) of the other interface to ring + * doorbell. + */ +int pci_epc_map_msi_irq(struct pci_epc *epc, u8 func_no, phys_addr_t phys_addr, + u8 interrupt_num, u32 entry_size, u32 *msi_data, + u32 *msi_addr_offset) +{ + int ret; + + if (IS_ERR_OR_NULL(epc)) + return -EINVAL; + + if (!epc->ops->map_msi_irq) + return -EINVAL; + + mutex_lock(&epc->lock); + ret = epc->ops->map_msi_irq(epc, func_no, phys_addr, interrupt_num, + entry_size, msi_data, msi_addr_offset); + mutex_unlock(&epc->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(pci_epc_map_msi_irq); + /** * pci_epc_get_msi() - get the number of MSI interrupt numbers allocated * @epc: the EPC device to which MSI interrupts was requested diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h index d9cb3944fb87..b82c9b100e97 100644 --- a/include/linux/pci-epc.h +++ b/include/linux/pci-epc.h @@ -55,6 +55,7 @@ pci_epc_interface_string(enum pci_epc_interface_type type) * @get_msix: ops to get the number of MSI-X interrupts allocated by the RC * from the MSI-X capability register * @raise_irq: ops to raise a legacy, MSI or MSI-X interrupt + * @map_msi_irq: ops to map physical address to MSI address and return MSI data * @start: ops to start the PCI link * @stop: ops to stop the PCI link * @owner: the module owner containing the ops @@ -77,6 +78,10 @@ struct pci_epc_ops { int (*get_msix)(struct pci_epc *epc, u8 func_no); int (*raise_irq)(struct pci_epc *epc, u8 func_no, enum pci_epc_irq_type type, u16 interrupt_num); + int (*map_msi_irq)(struct pci_epc *epc, u8 func_no, + phys_addr_t phys_addr, u8 interrupt_num, + u32 entry_size, u32 *msi_data, + u32 *msi_addr_offset); int (*start)(struct pci_epc *epc); void (*stop)(struct pci_epc *epc); const struct pci_epc_features* (*get_features)(struct pci_epc *epc, @@ -216,6 +221,9 @@ int pci_epc_get_msi(struct pci_epc *epc, u8 func_no); int pci_epc_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts, enum pci_barno, u32 offset); int pci_epc_get_msix(struct pci_epc *epc, u8 func_no); +int pci_epc_map_msi_irq(struct pci_epc *epc, u8 func_no, + phys_addr_t phys_addr, u8 interrupt_num, + u32 entry_size, u32 *msi_data, u32 *msi_addr_offset); int pci_epc_raise_irq(struct pci_epc *epc, u8 func_no, enum pci_epc_irq_type type, u16 interrupt_num); int pci_epc_start(struct pci_epc *epc); From patchwork Wed Sep 30 15:35:10 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 1374465 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=iOK6cbWo; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4C1gNB3hRMz9sSs for ; Thu, 1 Oct 2020 01:36:42 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730188AbgI3Pgk (ORCPT ); Wed, 30 Sep 2020 11:36:40 -0400 Received: from fllv0016.ext.ti.com ([198.47.19.142]:47626 "EHLO fllv0016.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729175AbgI3Pgk (ORCPT ); Wed, 30 Sep 2020 11:36:40 -0400 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by fllv0016.ext.ti.com (8.15.2/8.15.2) with ESMTP id 08UFaSwB076644; Wed, 30 Sep 2020 10:36:28 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1601480188; bh=lTz57oIbDoqLeHnWKHJxRenng3YXT0XKq15ddYdluKo=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=iOK6cbWoFTAR0RV/Ef4vb6qRvVxGXi09P67vyVXCD5TPjG7+SODX8WgfPwitmpcsJ VGn4opZap3azSs4CZpHpPPA5QQOMOPY07ycKWh0vVi7V2uq1ltYOnOT3r4Y7GeBdga r7vsxMHlbJVL4pA971zWLfR8DQJR5pwRnGK83TOU= Received: from DLEE106.ent.ti.com (dlee106.ent.ti.com [157.170.170.36]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 08UFaSED024588 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 30 Sep 2020 10:36:28 -0500 Received: from DLEE105.ent.ti.com (157.170.170.35) by DLEE106.ent.ti.com (157.170.170.36) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 30 Sep 2020 10:36:28 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DLEE105.ent.ti.com (157.170.170.35) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 30 Sep 2020 10:36:28 -0500 Received: from a0393678-ssd.dal.design.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZLZY033254; Wed, 30 Sep 2020 10:36:23 -0500 From: Kishon Vijay Abraham I To: Bjorn Helgaas , Jonathan Corbet , Kishon Vijay Abraham I , Lorenzo Pieralisi , Arnd Bergmann , Jon Mason , Dave Jiang , Allen Hubbe , Tom Joseph , Rob Herring CC: Greg Kroah-Hartman , , , , Subject: [PATCH v7 09/18] PCI: endpoint: Add pci_epf_ops for epf drivers to expose function specific attrs Date: Wed, 30 Sep 2020 21:05:10 +0530 Message-ID: <20200930153519.7282-10-kishon@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200930153519.7282-1-kishon@ti.com> References: <20200930153519.7282-1-kishon@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org In addition to the attributes that are generic across function drivers documented in Documentation/PCI/endpoint/pci-endpoint-cfs.rst, there could be function specific attributes that has to be exposed by the function driver to be configured by the user. Add ->add_cfs() in pci_epf_ops to be populated by the function driver if it has to expose any function specific attributes and pci_epf_type_add_cfs() to be invoked by pci-ep-cfs.c when sub-directory to main function directory is created. Signed-off-by: Kishon Vijay Abraham I --- drivers/pci/endpoint/pci-epf-core.c | 32 +++++++++++++++++++++++++++++ include/linux/pci-epf.h | 5 +++++ 2 files changed, 37 insertions(+) diff --git a/drivers/pci/endpoint/pci-epf-core.c b/drivers/pci/endpoint/pci-epf-core.c index 79329ec6373c..7646c8660d42 100644 --- a/drivers/pci/endpoint/pci-epf-core.c +++ b/drivers/pci/endpoint/pci-epf-core.c @@ -20,6 +20,38 @@ static DEFINE_MUTEX(pci_epf_mutex); static struct bus_type pci_epf_bus_type; static const struct device_type pci_epf_type; +/** + * pci_epf_type_add_cfs() - Help function drivers to expose function specific + * attributes in configfs + * @epf: the EPF device that has to be configured using configfs + * @group: the parent configfs group (corresponding to entries in + * pci_epf_device_id) + * + * Invoke to expose function specific attributes in configfs. If the function + * driver does not have anything to expose (attributes configured by user), + * return NULL. + */ +struct config_group *pci_epf_type_add_cfs(struct pci_epf *epf, + struct config_group *group) +{ + struct config_group *epf_type_group; + + if (!epf->driver) { + dev_err(&epf->dev, "epf device not bound to driver\n"); + return NULL; + } + + if (!epf->driver->ops->add_cfs) + return NULL; + + mutex_lock(&epf->lock); + epf_type_group = epf->driver->ops->add_cfs(epf, group); + mutex_unlock(&epf->lock); + + return epf_type_group; +} +EXPORT_SYMBOL_GPL(pci_epf_type_add_cfs); + /** * pci_epf_unbind() - Notify the function driver that the binding between the * EPF device and EPC device has been lost diff --git a/include/linux/pci-epf.h b/include/linux/pci-epf.h index 1dc66824f5a8..b241e7dd171f 100644 --- a/include/linux/pci-epf.h +++ b/include/linux/pci-epf.h @@ -62,10 +62,13 @@ struct pci_epf_header { * @bind: ops to perform when a EPC device has been bound to EPF device * @unbind: ops to perform when a binding has been lost between a EPC device * and EPF device + * @add_cfs: ops to initialize function specific configfs attributes */ struct pci_epf_ops { int (*bind)(struct pci_epf *epf); void (*unbind)(struct pci_epf *epf); + struct config_group *(*add_cfs)(struct pci_epf *epf, + struct config_group *group); }; /** @@ -188,4 +191,6 @@ void pci_epf_free_space(struct pci_epf *epf, void *addr, enum pci_barno bar, enum pci_epc_interface_type type); int pci_epf_bind(struct pci_epf *epf); void pci_epf_unbind(struct pci_epf *epf); +struct config_group *pci_epf_type_add_cfs(struct pci_epf *epf, + struct config_group *group); #endif /* __LINUX_PCI_EPF_H */ From patchwork Wed Sep 30 15:35:11 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 1374466 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=thX1t1Tx; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4C1gNJ0fLcz9sSG for ; Thu, 1 Oct 2020 01:36:48 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731035AbgI3Pgq (ORCPT ); Wed, 30 Sep 2020 11:36:46 -0400 Received: from fllv0016.ext.ti.com ([198.47.19.142]:47652 "EHLO fllv0016.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729175AbgI3Pgp (ORCPT ); Wed, 30 Sep 2020 11:36:45 -0400 Received: from lelv0266.itg.ti.com ([10.180.67.225]) by fllv0016.ext.ti.com (8.15.2/8.15.2) with ESMTP id 08UFaYx4076693; Wed, 30 Sep 2020 10:36:34 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1601480194; bh=6+pEZ2sU4Okxi+WU1gPDCbDCdtKwOEBqEUtnhiZE5hw=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=thX1t1Tx43HYtq/4ONtux00yLzoxpqMzHpw/NiFLt2229VnEZgbtw/b69KgjqBktw uFqn4eLMP1/CorKbW7I9sttvCgdfkLMem6gnha39gTi6Nf9uXogDQpTyC26r7LbkgY SpA/NP6H/D4SHgu1ZYvBrCh7kX68lCj/ly5v8Fls= Received: from DFLE102.ent.ti.com (dfle102.ent.ti.com [10.64.6.23]) by lelv0266.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 08UFaXqk110998 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 30 Sep 2020 10:36:33 -0500 Received: from DFLE103.ent.ti.com (10.64.6.24) by DFLE102.ent.ti.com (10.64.6.23) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 30 Sep 2020 10:36:33 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DFLE103.ent.ti.com (10.64.6.24) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 30 Sep 2020 10:36:33 -0500 Received: from a0393678-ssd.dal.design.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZLZZ033254; Wed, 30 Sep 2020 10:36:28 -0500 From: Kishon Vijay Abraham I To: Bjorn Helgaas , Jonathan Corbet , Kishon Vijay Abraham I , Lorenzo Pieralisi , Arnd Bergmann , Jon Mason , Dave Jiang , Allen Hubbe , Tom Joseph , Rob Herring CC: Greg Kroah-Hartman , , , , Subject: [PATCH v7 10/18] PCI: endpoint: Allow user to create sub-directory of 'EPF Device' directory Date: Wed, 30 Sep 2020 21:05:11 +0530 Message-ID: <20200930153519.7282-11-kishon@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200930153519.7282-1-kishon@ti.com> References: <20200930153519.7282-1-kishon@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Documentation/PCI/endpoint/pci-endpoint-cfs.rst explains how a user has to create a directory in-order to create a 'EPF Device' that can be configured/probed by 'EPF Driver'. Allow user to create a sub-directory of 'EPF Device' directory for any function specific attributes that has to be exposed to the user. Signed-off-by: Kishon Vijay Abraham I --- drivers/pci/endpoint/pci-ep-cfs.c | 23 +++++++++++++++++++++++ include/linux/pci-epf.h | 3 +++ 2 files changed, 26 insertions(+) diff --git a/drivers/pci/endpoint/pci-ep-cfs.c b/drivers/pci/endpoint/pci-ep-cfs.c index 8f750961d6ab..f3a8b833b479 100644 --- a/drivers/pci/endpoint/pci-ep-cfs.c +++ b/drivers/pci/endpoint/pci-ep-cfs.c @@ -490,7 +490,29 @@ static struct configfs_item_operations pci_epf_ops = { .release = pci_epf_release, }; +static struct config_group *pci_epf_type_make(struct config_group *group, + const char *name) +{ + struct pci_epf_group *epf_group = to_pci_epf_group(&group->cg_item); + struct config_group *epf_type_group; + + epf_type_group = pci_epf_type_add_cfs(epf_group->epf, group); + return epf_type_group; +} + +static void pci_epf_type_drop(struct config_group *group, + struct config_item *item) +{ + config_item_put(item); +} + +static struct configfs_group_operations pci_epf_type_group_ops = { + .make_group = &pci_epf_type_make, + .drop_item = &pci_epf_type_drop, +}; + static const struct config_item_type pci_epf_type = { + .ct_group_ops = &pci_epf_type_group_ops, .ct_item_ops = &pci_epf_ops, .ct_attrs = pci_epf_attrs, .ct_owner = THIS_MODULE, @@ -553,6 +575,7 @@ static struct config_group *pci_epf_make(struct config_group *group, goto free_name; } + epf->group = &epf_group->group; epf_group->epf = epf; kfree(epf_name); diff --git a/include/linux/pci-epf.h b/include/linux/pci-epf.h index b241e7dd171f..6833e2160ef1 100644 --- a/include/linux/pci-epf.h +++ b/include/linux/pci-epf.h @@ -9,6 +9,7 @@ #ifndef __LINUX_PCI_EPF_H #define __LINUX_PCI_EPF_H +#include #include #include #include @@ -128,6 +129,7 @@ struct pci_epf_bar { * EPC device * @sec_epc_bar: represents the BAR of EPF device associated with secondary EPC * @sec_epc_func_no: unique (physical) function number within the secondary EPC + * @group: configfs group associated with the EPF device */ struct pci_epf { struct device dev; @@ -150,6 +152,7 @@ struct pci_epf { struct list_head sec_epc_list; struct pci_epf_bar sec_epc_bar[6]; u8 sec_epc_func_no; + struct config_group *group; }; /** From patchwork Wed Sep 30 15:35:12 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 1374467 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=Md94JFk7; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4C1gPG5TbDz9sSs for ; Thu, 1 Oct 2020 01:37:38 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730057AbgI3Phh (ORCPT ); Wed, 30 Sep 2020 11:37:37 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:57342 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728819AbgI3Phh (ORCPT ); Wed, 30 Sep 2020 11:37:37 -0400 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 08UFbPNf044103; Wed, 30 Sep 2020 10:37:25 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1601480245; bh=1Ii+sodm1kJBqDIewPjIsrGNN7Eqm55YjonNoKE1M6Q=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=Md94JFk7t98hcR86Cq9CXZR6Qu1te3WnxHJaJAB9Dp7H5Zyi1nlKADKYkx7GeKgQ8 ZHQe+LHTAQHL7TsdBJp9poPkMB2a1QGD2Tp3Vj2mMoYl9Zt4iTyR6rkT5hvbBzrZrT jRDIK8r4hFGceHAp79UWItxUZQ4rgJ+XQiINhpjM= Received: from DFLE103.ent.ti.com (dfle103.ent.ti.com [10.64.6.24]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 08UFbPGN026755 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 30 Sep 2020 10:37:25 -0500 Received: from DFLE104.ent.ti.com (10.64.6.25) by DFLE103.ent.ti.com (10.64.6.24) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 30 Sep 2020 10:37:25 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DFLE104.ent.ti.com (10.64.6.25) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 30 Sep 2020 10:37:25 -0500 Received: from a0393678-ssd.dal.design.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZLZa033254; Wed, 30 Sep 2020 10:36:34 -0500 From: Kishon Vijay Abraham I To: Bjorn Helgaas , Jonathan Corbet , Kishon Vijay Abraham I , Lorenzo Pieralisi , Arnd Bergmann , Jon Mason , Dave Jiang , Allen Hubbe , Tom Joseph , Rob Herring CC: Greg Kroah-Hartman , , , , Subject: [PATCH v7 11/18] PCI: cadence: Implement ->msi_map_irq() ops Date: Wed, 30 Sep 2020 21:05:12 +0530 Message-ID: <20200930153519.7282-12-kishon@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200930153519.7282-1-kishon@ti.com> References: <20200930153519.7282-1-kishon@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Implement ->msi_map_irq() ops in order to map physical address to MSI address and return MSI data. Signed-off-by: Kishon Vijay Abraham I --- .../pci/controller/cadence/pcie-cadence-ep.c | 53 +++++++++++++++++++ 1 file changed, 53 insertions(+) diff --git a/drivers/pci/controller/cadence/pcie-cadence-ep.c b/drivers/pci/controller/cadence/pcie-cadence-ep.c index 254a3e1eff50..5df492a12042 100644 --- a/drivers/pci/controller/cadence/pcie-cadence-ep.c +++ b/drivers/pci/controller/cadence/pcie-cadence-ep.c @@ -383,6 +383,57 @@ static int cdns_pcie_ep_send_msi_irq(struct cdns_pcie_ep *ep, u8 fn, return 0; } +static int cdns_pcie_ep_map_msi_irq(struct pci_epc *epc, u8 fn, + phys_addr_t addr, u8 interrupt_num, + u32 entry_size, u32 *msi_data, + u32 *msi_addr_offset) +{ + struct cdns_pcie_ep *ep = epc_get_drvdata(epc); + u32 cap = CDNS_PCIE_EP_FUNC_MSI_CAP_OFFSET; + struct cdns_pcie *pcie = &ep->pcie; + u64 pci_addr, pci_addr_mask = 0xff; + u16 flags, mme, data, data_mask; + u8 msi_count; + int ret; + int i; + + /* Check whether the MSI feature has been enabled by the PCI host. */ + flags = cdns_pcie_ep_fn_readw(pcie, fn, cap + PCI_MSI_FLAGS); + if (!(flags & PCI_MSI_FLAGS_ENABLE)) + return -EINVAL; + + /* Get the number of enabled MSIs */ + mme = (flags & PCI_MSI_FLAGS_QSIZE) >> 4; + msi_count = 1 << mme; + if (!interrupt_num || interrupt_num > msi_count) + return -EINVAL; + + /* Compute the data value to be written. */ + data_mask = msi_count - 1; + data = cdns_pcie_ep_fn_readw(pcie, fn, cap + PCI_MSI_DATA_64); + data = data & ~data_mask; + + /* Get the PCI address where to write the data into. */ + pci_addr = cdns_pcie_ep_fn_readl(pcie, fn, cap + PCI_MSI_ADDRESS_HI); + pci_addr <<= 32; + pci_addr |= cdns_pcie_ep_fn_readl(pcie, fn, cap + PCI_MSI_ADDRESS_LO); + pci_addr &= GENMASK_ULL(63, 2); + + for (i = 0; i < interrupt_num; i++) { + ret = cdns_pcie_ep_map_addr(epc, fn, addr, + pci_addr & ~pci_addr_mask, + entry_size); + if (ret) + return ret; + addr = addr + entry_size; + } + + *msi_data = data; + *msi_addr_offset = pci_addr & pci_addr_mask; + + return 0; +} + static int cdns_pcie_ep_send_msix_irq(struct cdns_pcie_ep *ep, u8 fn, u16 interrupt_num) { @@ -482,6 +533,7 @@ static const struct pci_epc_features cdns_pcie_epc_features = { .linkup_notifier = false, .msi_capable = true, .msix_capable = true, + .align = 256, }; static const struct pci_epc_features* @@ -501,6 +553,7 @@ static const struct pci_epc_ops cdns_pcie_epc_ops = { .set_msix = cdns_pcie_ep_set_msix, .get_msix = cdns_pcie_ep_get_msix, .raise_irq = cdns_pcie_ep_raise_irq, + .map_msi_irq = cdns_pcie_ep_map_msi_irq, .start = cdns_pcie_ep_start, .get_features = cdns_pcie_ep_get_features, }; From patchwork Wed Sep 30 15:35:13 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 1374468 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=ymXglrP2; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4C1gPT3KvYz9sSn for ; Thu, 1 Oct 2020 01:37:49 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730996AbgI3Pho (ORCPT ); Wed, 30 Sep 2020 11:37:44 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:57372 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725823AbgI3Pho (ORCPT ); Wed, 30 Sep 2020 11:37:44 -0400 Received: from lelv0265.itg.ti.com ([10.180.67.224]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 08UFbWLP044151; Wed, 30 Sep 2020 10:37:32 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1601480252; bh=XMppkYZ4t3t/jCdVdtCLKocKpBY6oIXcMXBRoQk+HUs=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=ymXglrP2o+/imZrGn+MigN1FT3A7UIEJpFOz2DPSeEtKxAWlhlt9lr6JufSFkw5Hv r1/lErIAYrFjHgHm0z1eCa++8OjLrMc8/C9wNGK36a0lcexYRhi99clO1utrRvWUK9 0pS963eHKqd7xLlbvwblAHXQikBbrMGfDglbfOiY= Received: from DFLE104.ent.ti.com (dfle104.ent.ti.com [10.64.6.25]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 08UFbWQd044547 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 30 Sep 2020 10:37:32 -0500 Received: from DFLE106.ent.ti.com (10.64.6.27) by DFLE104.ent.ti.com (10.64.6.25) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 30 Sep 2020 10:37:31 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DFLE106.ent.ti.com (10.64.6.27) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 30 Sep 2020 10:37:31 -0500 Received: from a0393678-ssd.dal.design.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZLZb033254; Wed, 30 Sep 2020 10:37:25 -0500 From: Kishon Vijay Abraham I To: Bjorn Helgaas , Jonathan Corbet , Kishon Vijay Abraham I , Lorenzo Pieralisi , Arnd Bergmann , Jon Mason , Dave Jiang , Allen Hubbe , Tom Joseph , Rob Herring CC: Greg Kroah-Hartman , , , , Subject: [PATCH v7 12/18] PCI: cadence: Configure LM_EP_FUNC_CFG based on epc->function_num_map Date: Wed, 30 Sep 2020 21:05:13 +0530 Message-ID: <20200930153519.7282-13-kishon@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200930153519.7282-1-kishon@ti.com> References: <20200930153519.7282-1-kishon@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org The number of functions supported by the endpoint controller is configured in LM_EP_FUNC_CFG based on func_no member of struct pci_epf. Now that an endpoint function can be associated with two endpoint controllers (primary and secondary), just using func_no will not suffice as that will take into account only if the endpoint controller is associated with the primary interface of endpoint function. Instead use epc->function_num_map which will already have the configured functions information (irrespective of whether the endpoint controller is associated with primary or secondary interface). Signed-off-by: Kishon Vijay Abraham I --- drivers/pci/controller/cadence/pcie-cadence-ep.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/pci/controller/cadence/pcie-cadence-ep.c b/drivers/pci/controller/cadence/pcie-cadence-ep.c index 5df492a12042..59ce57744345 100644 --- a/drivers/pci/controller/cadence/pcie-cadence-ep.c +++ b/drivers/pci/controller/cadence/pcie-cadence-ep.c @@ -507,18 +507,13 @@ static int cdns_pcie_ep_start(struct pci_epc *epc) struct cdns_pcie_ep *ep = epc_get_drvdata(epc); struct cdns_pcie *pcie = &ep->pcie; struct device *dev = pcie->dev; - struct pci_epf *epf; - u32 cfg; int ret; /* * BIT(0) is hardwired to 1, hence function 0 is always enabled * and can't be disabled anyway. */ - cfg = BIT(0); - list_for_each_entry(epf, &epc->pci_epf, list) - cfg |= BIT(epf->func_no); - cdns_pcie_writel(pcie, CDNS_PCIE_LM_EP_FUNC_CFG, cfg); + cdns_pcie_writel(pcie, CDNS_PCIE_LM_EP_FUNC_CFG, epc->function_num_map); ret = cdns_pcie_start_link(pcie); if (ret) { From patchwork Wed Sep 30 15:35:14 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 1374469 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=WRQKZD4/; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4C1gPb1srmz9sSG for ; Thu, 1 Oct 2020 01:37:55 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730804AbgI3Phy (ORCPT ); Wed, 30 Sep 2020 11:37:54 -0400 Received: from fllv0016.ext.ti.com ([198.47.19.142]:47960 "EHLO fllv0016.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725823AbgI3Phy (ORCPT ); Wed, 30 Sep 2020 11:37:54 -0400 Received: from fllv0035.itg.ti.com ([10.64.41.0]) by fllv0016.ext.ti.com (8.15.2/8.15.2) with ESMTP id 08UFbdTw077220; Wed, 30 Sep 2020 10:37:39 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1601480259; bh=ln/ggH/Z3zvYGMMOl13E7Ucu7jBr/M/F6X/p89TsCn0=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=WRQKZD4/LkMR68nKoyZpOj+4oCpakPo/LqTHcAo4JAr6fXO0qKvfThcyIkLJf3Xuv ydpMk4FBzkzHFzyp314asqRc/zaVNgqYf9kfOGfRfjQ8Mqub9sQon5VyIhSRfHrPqp 1TijRK4X5TUbIZjRsyd53NqYaYgEBsTp7gPKX6UM= Received: from DLEE103.ent.ti.com (dlee103.ent.ti.com [157.170.170.33]) by fllv0035.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFbdXF032821; Wed, 30 Sep 2020 10:37:39 -0500 Received: from DLEE114.ent.ti.com (157.170.170.25) by DLEE103.ent.ti.com (157.170.170.33) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 30 Sep 2020 10:37:38 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DLEE114.ent.ti.com (157.170.170.25) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 30 Sep 2020 10:37:38 -0500 Received: from a0393678-ssd.dal.design.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZLZc033254; Wed, 30 Sep 2020 10:37:31 -0500 From: Kishon Vijay Abraham I To: Bjorn Helgaas , Jonathan Corbet , Kishon Vijay Abraham I , Lorenzo Pieralisi , Arnd Bergmann , Jon Mason , Dave Jiang , Allen Hubbe , Tom Joseph , Rob Herring CC: Greg Kroah-Hartman , , , , Subject: [PATCH v7 13/18] PCI: endpoint: Add EP function driver to provide NTB functionality Date: Wed, 30 Sep 2020 21:05:14 +0530 Message-ID: <20200930153519.7282-14-kishon@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200930153519.7282-1-kishon@ti.com> References: <20200930153519.7282-1-kishon@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Add a new endpoint function driver to provide NTB functionality using multiple PCIe endpoint instances. Signed-off-by: Kishon Vijay Abraham I --- drivers/pci/endpoint/functions/Kconfig | 12 + drivers/pci/endpoint/functions/Makefile | 1 + drivers/pci/endpoint/functions/pci-epf-ntb.c | 2114 ++++++++++++++++++ 3 files changed, 2127 insertions(+) create mode 100644 drivers/pci/endpoint/functions/pci-epf-ntb.c diff --git a/drivers/pci/endpoint/functions/Kconfig b/drivers/pci/endpoint/functions/Kconfig index 8820d0f7ec77..24bfb2af65a1 100644 --- a/drivers/pci/endpoint/functions/Kconfig +++ b/drivers/pci/endpoint/functions/Kconfig @@ -12,3 +12,15 @@ config PCI_EPF_TEST for PCI Endpoint. If in doubt, say "N" to disable Endpoint test driver. + +config PCI_EPF_NTB + tristate "PCI Endpoint NTB driver" + depends on PCI_ENDPOINT + help + Select this configuration option to enable the NTB driver + for PCI Endpoint. NTB driver implements NTB controller + functionality using multiple PCIe endpoint instances. It + can support NTB endpoint function devices created using + device tree. + + If in doubt, say "N" to disable Endpoint NTB driver. diff --git a/drivers/pci/endpoint/functions/Makefile b/drivers/pci/endpoint/functions/Makefile index d6fafff080e2..96ab932a537a 100644 --- a/drivers/pci/endpoint/functions/Makefile +++ b/drivers/pci/endpoint/functions/Makefile @@ -4,3 +4,4 @@ # obj-$(CONFIG_PCI_EPF_TEST) += pci-epf-test.o +obj-$(CONFIG_PCI_EPF_NTB) += pci-epf-ntb.o diff --git a/drivers/pci/endpoint/functions/pci-epf-ntb.c b/drivers/pci/endpoint/functions/pci-epf-ntb.c new file mode 100644 index 000000000000..e2dc5cae5c81 --- /dev/null +++ b/drivers/pci/endpoint/functions/pci-epf-ntb.c @@ -0,0 +1,2114 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * Endpoint Function Driver to implement Non-Transparent Bridge functionality + * + * Copyright (C) 2020 Texas Instruments + * Author: Kishon Vijay Abraham I + */ + +/* + *The PCI NTB function driver configures the SoC with multiple PCIe Endpoint(EP) + *controller instances (see diagram below) in such a way that transaction from + *one EP controller is routed to the other EP controller. Once PCI NTB function + *driver configures the SoC with multiple EP instances, HOST1 and HOST2 can + *communicate with each other using SoC as a bridge. + * + * +-------------+ +-------------+ + * | | | | + * | HOST1 | | HOST2 | + * | | | | + * +------^------+ +------^------+ + * | | + * | | + *+---------|-------------------------------------------------|---------+ + *| +------v------+ +------v------+ | + *| | | | | | + *| | EP | | EP | | + *| | CONTROLLER1 | | CONTROLLER2 | | + *| | <-----------------------------------> | | + *| | | | | | + *| | | | | | + *| | | SoC With Multiple EP Instances | | | + *| | | (Configured using NTB Function) | | | + *| +-------------+ +-------------+ | + *+---------------------------------------------------------------------+ + */ + +#include +#include +#include +#include + +#include +#include + +static struct workqueue_struct *kpcintb_workqueue; + +#define COMMAND_CONFIGURE_DOORBELL 1 +#define COMMAND_TEARDOWN_DOORBELL 2 +#define COMMAND_CONFIGURE_MW 3 +#define COMMAND_TEARDOWN_MW 4 +#define COMMAND_LINK_UP 5 +#define COMMAND_LINK_DOWN 6 + +#define COMMAND_STATUS_OK 1 +#define COMMAND_STATUS_ERROR 2 + +#define LINK_STATUS_UP BIT(0) + +#define SPAD_COUNT 64 +#define DB_COUNT 4 +#define NTB_MW_OFFSET 2 +#define DB_COUNT_MASK GENMASK(15, 0) +#define MSIX_ENABLE BIT(16) +#define MAX_DB_COUNT 32 +#define MAX_MW 4 + +enum epf_ntb_bar { + BAR_CONFIG, + BAR_PEER_SPAD, + BAR_DB_MW1, + BAR_MW2, + BAR_MW3, + BAR_MW4, +}; + +struct epf_ntb { + u32 num_mws; + u32 db_count; + u32 spad_count; + struct pci_epf *epf; + u64 mws_size[MAX_MW]; + struct config_group group; + struct epf_ntb_epc *epc[2]; +}; + +#define to_epf_ntb(epf_group) container_of((epf_group), struct epf_ntb, group) + +struct epf_ntb_epc { + u8 func_no; + bool linkup; + bool is_msix; + int msix_bar; + u32 spad_size; + struct pci_epc *epc; + struct epf_ntb *epf_ntb; + void __iomem *mw_addr[6]; + size_t msix_table_offset; + struct epf_ntb_ctrl *reg; + struct pci_epf_bar *epf_bar; + enum pci_barno epf_ntb_bar[6]; + struct delayed_work cmd_handler; + enum pci_epc_interface_type type; + const struct pci_epc_features *epc_features; +}; + +struct epf_ntb_ctrl { + u32 command; + u32 argument; + u16 command_status; + u16 link_status; + u32 topology; + u64 addr; + u64 size; + u32 num_mws; + u32 mw1_offset; + u32 spad_offset; + u32 spad_count; + u32 db_entry_size; + u32 db_data[MAX_DB_COUNT]; + u32 db_offset[MAX_DB_COUNT]; +} __packed; + +static struct pci_epf_header epf_ntb_header = { + .vendorid = PCI_ANY_ID, + .deviceid = PCI_ANY_ID, + .baseclass_code = PCI_BASE_CLASS_MEMORY, + .interrupt_pin = PCI_INTERRUPT_INTA, +}; + +/** + * epf_ntb_link_up() - Raise link_up interrupt to both the hosts + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * @link_up: true or false indicating Link is UP or Down + * + * Once NTB function in HOST1 and the NTB function in HOST2 invoke + * ntb_link_enable(), this NTB function driver will trigger a link event to + * the NTB client in both the hosts. + */ +static int epf_ntb_link_up(struct epf_ntb *ntb, bool link_up) +{ + enum pci_epc_interface_type type; + enum pci_epc_irq_type irq_type; + struct epf_ntb_epc *ntb_epc; + struct epf_ntb_ctrl *ctrl; + bool is_msix; + u8 func_no; + int ret; + + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++) { + ntb_epc = ntb->epc[type]; + func_no = ntb_epc->func_no; + is_msix = ntb_epc->is_msix; + ctrl = ntb_epc->reg; + if (link_up) + ctrl->link_status |= LINK_STATUS_UP; + else + ctrl->link_status &= ~LINK_STATUS_UP; + irq_type = is_msix ? PCI_EPC_IRQ_MSIX : PCI_EPC_IRQ_MSI; + ret = pci_epc_raise_irq(ntb_epc->epc, func_no, irq_type, + 1); + if (ret < 0) { + WARN(1, "%s intf: Failed to raise Link Up IRQ\n", + pci_epc_interface_string(type)); + return ret; + } + } + + return 0; +} + +/** + * epf_ntb_configure_mw() - Configure the Outbound Address Space for one host + * to access the memory window of other host + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * @type: PRIMARY interface or SECONDARY interface + * @mw: Index of the memory window (either 0, 1, 2 or 3) + * + *+-----------------+ +----->+----------------+-----------+-----------------+ + *| BAR0 | | | Doorbell 1 +-----------> MSI|X ADDRESS 1 | + *+-----------------+ | +----------------+ +-----------------+ + *| BAR1 | | | Doorbell 2 +---------+ | | + *+-----------------+----+ +----------------+ | | | + *| BAR2 | | Doorbell 3 +-------+ | +-----------------+ + *+-----------------+----+ +----------------+ | +-> MSI|X ADDRESS 2 | + *| BAR3 | | | Doorbell 4 +-----+ | +-----------------+ + *+-----------------+ | |----------------+ | | | | + *| BAR4 | | | | | | +-----------------+ + *+-----------------+ | | MW1 +---+ | +-->+ MSI|X ADDRESS 3|| + *| BAR5 | | | | | | +-----------------+ + *+-----------------+ +----->-----------------+ | | | | + * EP CONTROLLER 1 | | | | +-----------------+ + * | | | +---->+ MSI|X ADDRESS 4 | + * +----------------+ | +-----------------+ + * (A) EP CONTROLLER 2 | | | + * (OB SPACE) | | | + * +-------> MW1 | + * | | + * | | + * (B) +-----------------+ + * | | + * | | + * | | + * | | + * | | + * +-----------------+ + * PCI Address Space + * (Managed by HOST2) + * + * This function performs stage (B) in the above diagram (see MW1) i.e map OB + * address space of memory window to PCI address space. + * + * This operation requires 3 parameters + * 1) Address in the outbound address space + * 2) Address in the PCIe Address space + * 3) Size of the address region that is requested to be mapped + * + * The address in the outbound address space (for MW1, MW2, MW3 and MW4) is + * stored in epf_bar corresponding to BAR_DB_MW1 for MW1 and BAR_MW2, BAR_MW3 + * BAR_MW4 for rest of the BARs of epf_ntb_epc that is connected to HOST1. This + * is populated in epf_ntb_alloc_peer_mem() in this driver. + * + * The address and size of the PCIe address region that has to be mapped would + * be provided by HOST2 in ctrl->addr and ctrl->size of epf_ntb_epc that is + * connected to HOST2. + * + * Please note Memory window1 (MW1) and Doorbell registers together will be + * mapped to a single BAR (BAR2) above for 32-bit BARs. The exact BAR that's + * used for Memory window (MW) can be obtained from epf_ntb_bar[BAR_DB_MW1], + * epf_ntb_bar[BAR_MW2], epf_ntb_bar[BAR_MW2], epf_ntb_bar[BAR_MW2]. + */ +static int +epf_ntb_configure_mw(struct epf_ntb *ntb, enum pci_epc_interface_type type, + u32 mw) +{ + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc; + struct pci_epf_bar *peer_epf_bar; + enum pci_barno peer_barno; + struct epf_ntb_ctrl *ctrl; + phys_addr_t phys_addr; + struct pci_epc *epc; + u64 addr, size; + int ret = 0; + u8 func_no; + + ntb_epc = ntb->epc[type]; + epc = ntb_epc->epc; + + peer_ntb_epc = ntb->epc[!type]; + peer_barno = peer_ntb_epc->epf_ntb_bar[mw + NTB_MW_OFFSET]; + peer_epf_bar = &peer_ntb_epc->epf_bar[peer_barno]; + + phys_addr = peer_epf_bar->phys_addr; + ctrl = ntb_epc->reg; + addr = ctrl->addr; + size = ctrl->size; + if (mw + NTB_MW_OFFSET == BAR_DB_MW1) + phys_addr += ctrl->mw1_offset; + + if (size > ntb->mws_size[mw]) { + WARN(1, "%s intf: MW: %d Req Sz:%llxx > Supported Sz:%llx\n", + pci_epc_interface_string(type), mw, size, + ntb->mws_size[mw]); + ret = -EINVAL; + goto err_invalid_size; + } + + func_no = ntb_epc->func_no; + + ret = pci_epc_map_addr(epc, func_no, phys_addr, addr, size); + WARN(ret < 0, "%s intf: Failed to map memory window %d address\n", + pci_epc_interface_string(type), mw); + +err_invalid_size: + + return ret; +} + +/** + * epf_ntb_teardown_mw() - Teardown the configured OB ATU + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * @type: PRIMARY interface or SECONDARY interface + * @mw: Index of the memory window (either 0, 1, 2 or 3) + * + * Teardown the configured OB ATU configured in epf_ntb_configure_mw() using + * pci_epc_unmap_addr() + */ +static void +epf_ntb_teardown_mw(struct epf_ntb *ntb, enum pci_epc_interface_type type, + u32 mw) +{ + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc; + struct pci_epf_bar *peer_epf_bar; + enum pci_barno peer_barno; + struct epf_ntb_ctrl *ctrl; + phys_addr_t phys_addr; + struct pci_epc *epc; + u8 func_no; + + ntb_epc = ntb->epc[type]; + epc = ntb_epc->epc; + + peer_ntb_epc = ntb->epc[!type]; + peer_barno = peer_ntb_epc->epf_ntb_bar[mw + NTB_MW_OFFSET]; + peer_epf_bar = &peer_ntb_epc->epf_bar[peer_barno]; + + phys_addr = peer_epf_bar->phys_addr; + ctrl = ntb_epc->reg; + if (mw + NTB_MW_OFFSET == BAR_DB_MW1) + phys_addr += ctrl->mw1_offset; + func_no = ntb_epc->func_no; + + pci_epc_unmap_addr(epc, func_no, phys_addr); +} + +/** + * epf_ntb_configure_msi() - Map OB address space to MSI address + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * @type: PRIMARY interface or SECONDARY interface + * @db_count: Number of doorbell interrupts to map + * + *+-----------------+ +----->+----------------+-----------+-----------------+ + *| BAR0 | | | Doorbell 1 +---+-------> MSI ADDRESS | + *+-----------------+ | +----------------+ | +-----------------+ + *| BAR1 | | | Doorbell 2 +---+ | | + *+-----------------+----+ +----------------+ | | | + *| BAR2 | | Doorbell 3 +---+ | | + *+-----------------+----+ +----------------+ | | | + *| BAR3 | | | Doorbell 4 +---+ | | + *+-----------------+ | |----------------+ | | + *| BAR4 | | | | | | + *+-----------------+ | | MW1 | | | + *| BAR5 | | | | | | + *+-----------------+ +----->-----------------+ | | + * EP CONTROLLER 1 | | | | + * | | | | + * +----------------+ +-----------------+ + * (A) EP CONTROLLER 2 | | + * (OB SPACE) | | + * | MW1 | + * | | + * | | + * (B) +-----------------+ + * | | + * | | + * | | + * | | + * | | + * +-----------------+ + * PCI Address Space + * (Managed by HOST2) + * + * + * This function performs stage (B) in the above diagram (see Doorbell 1, + * Doorbell 2, Doorbell 3, Doorbell 4) i.e map OB address space corresponding to + * doorbell to MSI address in PCI address space. + * + * This operation requires 3 parameters + * 1) Address reserved for doorbell in the outbound address space + * 2) MSI-X address in the PCIe Address space + * 3) Number of MSI-X interrupts that has to be configured + * + * The address in the outbound address space (for the Doorbell) is stored in + * epf_bar corresponding to BAR_DB_MW1 of epf_ntb_epc that is connected to + * HOST1. This is populated in epf_ntb_alloc_peer_mem() in this driver along + * with address for MW1. + * + * pci_epc_map_msi_irq() takes the MSI address from MSI capability register + * and maps the OB address (obtained in epf_ntb_alloc_peer_mem()) to the MSI + * address. + * + * epf_ntb_configure_msi() also stores the MSI data to raise each interrupt + * in db_data of the peer's control region. This helps the peer to raise + * doorbell of the other host by writing db_data to the BAR corresponding to + * BAR_DB_MW1. + */ +static int +epf_ntb_configure_msi(struct epf_ntb *ntb, enum pci_epc_interface_type type, + u16 db_count) +{ + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc; + u32 db_entry_size, db_data, db_offset; + struct pci_epf_bar *peer_epf_bar; + struct epf_ntb_ctrl *peer_ctrl; + enum pci_barno peer_barno; + phys_addr_t phys_addr; + struct pci_epc *epc; + u8 func_no; + int ret, i; + + ntb_epc = ntb->epc[type]; + epc = ntb_epc->epc; + + peer_ntb_epc = ntb->epc[!type]; + peer_barno = peer_ntb_epc->epf_ntb_bar[BAR_DB_MW1]; + peer_epf_bar = &peer_ntb_epc->epf_bar[peer_barno]; + peer_ctrl = peer_ntb_epc->reg; + db_entry_size = peer_ctrl->db_entry_size; + + phys_addr = peer_epf_bar->phys_addr; + func_no = ntb_epc->func_no; + + ret = pci_epc_map_msi_irq(epc, func_no, phys_addr, db_count, + db_entry_size, &db_data, &db_offset); + if (ret < 0) { + WARN(1, "%s intf: Failed to map MSI IRQ\n", + pci_epc_interface_string(type)); + return ret; + } + + for (i = 0; i < db_count; i++) { + peer_ctrl->db_data[i] = db_data | i; + peer_ctrl->db_offset[i] = db_offset; + } + + return 0; +} + +/** + * epf_ntb_configure_msix() - Map OB address space to MSI-X address + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * @type: PRIMARY interface or SECONDARY interface + * @db_count: Number of doorbell interrupts to map + * + *+-----------------+ +----->+----------------+-----------+-----------------+ + *| BAR0 | | | Doorbell 1 +-----------> MSI-X ADDRESS 1 | + *+-----------------+ | +----------------+ +-----------------+ + *| BAR1 | | | Doorbell 2 +---------+ | | + *+-----------------+----+ +----------------+ | | | + *| BAR2 | | Doorbell 3 +-------+ | +-----------------+ + *+-----------------+----+ +----------------+ | +-> MSI-X ADDRESS 2 | + *| BAR3 | | | Doorbell 4 +-----+ | +-----------------+ + *+-----------------+ | |----------------+ | | | | + *| BAR4 | | | | | | +-----------------+ + *+-----------------+ | | MW1 + | +-->+ MSI-X ADDRESS 3|| + *| BAR5 | | | | | +-----------------+ + *+-----------------+ +----->-----------------+ | | | + * EP CONTROLLER 1 | | | +-----------------+ + * | | +---->+ MSI-X ADDRESS 4 | + * +----------------+ +-----------------+ + * (A) EP CONTROLLER 2 | | + * (OB SPACE) | | + * | MW1 | + * | | + * | | + * (B) +-----------------+ + * | | + * | | + * | | + * | | + * | | + * +-----------------+ + * PCI Address Space + * (Managed by HOST2) + * + * This function performs stage (B) in the above diagram (see Doorbell 1, + * Doorbell 2, Doorbell 3, Doorbell 4) i.e map OB address space corresponding to + * doorbell to MSI-X address in PCI address space. + * + * This operation requires 3 parameters + * 1) Address reserved for doorbell in the outbound address space + * 2) MSI-X address in the PCIe Address space + * 3) Number of MSI-X interrupts that has to be configured + * + * The address in the outbound address space (for the Doorbell) is stored in + * epf_bar corresponding to BAR_DB_MW1 of epf_ntb_epc that is connected to + * HOST1. This is populated in epf_ntb_alloc_peer_mem() in this driver along + * with address for MW1. + * The MSI-X address is in the MSI-X table of EP CONTROLLER 2 and + * the count of doorbell is in ctrl->argument of epf_ntb_epc that is connected + * to HOST2. MSI-X table is stored memory mapped to ntb_epc->msix_bar and the + * offset is in ntb_epc->msix_table_offset. From this epf_ntb_configure_msix() + * gets the MSI-X address and MSI-X data + * + * epf_ntb_configure_msix() also stores the MSI-X data to raise each interrupt + * in db_data of the peer's control region. This helps the peer to raise + * doorbell of the other host by writing db_data to the BAR corresponding to + * BAR_DB_MW1. + */ +static int epf_ntb_configure_msix(struct epf_ntb *ntb, + enum pci_epc_interface_type type, + u16 db_count) +{ + const struct pci_epc_features *epc_features; + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc; + struct pci_epf_bar *peer_epf_bar, *epf_bar; + struct pci_epf_msix_tbl *msix_tbl; + struct epf_ntb_ctrl *peer_ctrl; + u32 db_entry_size, msg_data; + enum pci_barno peer_barno; + phys_addr_t phys_addr; + struct pci_epc *epc; + size_t align; + u64 msg_addr; + u8 func_no; + int ret, i; + + ntb_epc = ntb->epc[type]; + epc = ntb_epc->epc; + + epf_bar = &ntb_epc->epf_bar[ntb_epc->msix_bar]; + msix_tbl = epf_bar->addr + ntb_epc->msix_table_offset; + + peer_ntb_epc = ntb->epc[!type]; + peer_barno = peer_ntb_epc->epf_ntb_bar[BAR_DB_MW1]; + peer_epf_bar = &peer_ntb_epc->epf_bar[peer_barno]; + phys_addr = peer_epf_bar->phys_addr; + peer_ctrl = peer_ntb_epc->reg; + epc_features = ntb_epc->epc_features; + align = epc_features->align; + + func_no = ntb_epc->func_no; + db_entry_size = peer_ctrl->db_entry_size; + + for (i = 0; i < db_count; i++) { + msg_addr = ALIGN_DOWN(msix_tbl[i].msg_addr, align); + msg_data = msix_tbl[i].msg_data; + ret = pci_epc_map_addr(epc, func_no, phys_addr, msg_addr, + db_entry_size); + if (ret) + return ret; + phys_addr = phys_addr + db_entry_size; + peer_ctrl->db_data[i] = msg_data; + peer_ctrl->db_offset[i] = msix_tbl[i].msg_addr & (align - 1); + } + ntb_epc->is_msix = true; + + return 0; +} + +/** + * epf_ntb_configure_db() - Configure the Outbound Address Space for one host + * to ring the doorbell of other host + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * @type: PRIMARY interface or SECONDARY interface + * @db_count: Count of the number of doorbells that has to be configured + * @msix: Indicates whether MSI-X or MSI should be used + * + * Invokes epf_ntb_configure_msix() or epf_ntb_configure_msi() required for + * one HOST to ring the doorbell of other HOST. + */ +static int +epf_ntb_configure_db(struct epf_ntb *ntb, enum pci_epc_interface_type type, + u16 db_count, bool msix) +{ + int ret; + + if (db_count > MAX_DB_COUNT) + return -EINVAL; + + if (msix) + ret = epf_ntb_configure_msix(ntb, type, db_count); + else + ret = epf_ntb_configure_msi(ntb, type, db_count); + + WARN(ret < 0, "%s intf: Failed to configure DB\n", + pci_epc_interface_string(type)); + + return ret; +} + +/** + * epf_ntb_teardown_db() - Unmap address in OB address space to MSI/MSI-X + * address + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * @type: PRIMARY interface or SECONDARY interface + * + * Invoke pci_epc_unmap_addr() to unmap OB address to MSI/MSI-X address. + */ +static void +epf_ntb_teardown_db(struct epf_ntb *ntb, enum pci_epc_interface_type type) +{ + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc; + struct pci_epf_bar *peer_epf_bar; + enum pci_barno peer_barno; + phys_addr_t phys_addr; + struct pci_epc *epc; + u8 func_no; + + ntb_epc = ntb->epc[type]; + epc = ntb_epc->epc; + + peer_ntb_epc = ntb->epc[!type]; + peer_barno = peer_ntb_epc->epf_ntb_bar[BAR_DB_MW1]; + peer_epf_bar = &peer_ntb_epc->epf_bar[peer_barno]; + phys_addr = peer_epf_bar->phys_addr; + func_no = ntb_epc->func_no; + + pci_epc_unmap_addr(epc, func_no, phys_addr); +} + +/** + * epf_ntb_cmd_handler() - Handle commands provided by the NTB Host + * @work: work_struct for the two epf_ntb_epc (PRIMARY and SECONDARY) + * + * Workqueue function that gets invoked for the two epf_ntb_epc + * periodically (once every 5ms) to see if it has received any commands + * from NTB host. The host can send commands to configure doorbell or + * configure memory window or to update link status. + */ +static void epf_ntb_cmd_handler(struct work_struct *work) +{ + enum pci_epc_interface_type type; + struct epf_ntb_epc *ntb_epc; + struct epf_ntb_ctrl *ctrl; + u32 command, argument; + struct epf_ntb *ntb; + struct device *dev; + u16 db_count; + bool is_msix; + int ret; + + ntb_epc = container_of(work, struct epf_ntb_epc, cmd_handler.work); + ctrl = ntb_epc->reg; + command = ctrl->command; + if (!command) + goto reset_handler; + argument = ctrl->argument; + + ctrl->command = 0; + ctrl->argument = 0; + + ctrl = ntb_epc->reg; + type = ntb_epc->type; + ntb = ntb_epc->epf_ntb; + dev = &ntb->epf->dev; + + switch (command) { + case COMMAND_CONFIGURE_DOORBELL: + db_count = argument & DB_COUNT_MASK; + is_msix = argument & MSIX_ENABLE; + ret = epf_ntb_configure_db(ntb, type, db_count, is_msix); + if (ret < 0) + ctrl->command_status = COMMAND_STATUS_ERROR; + else + ctrl->command_status = COMMAND_STATUS_OK; + break; + case COMMAND_TEARDOWN_DOORBELL: + epf_ntb_teardown_db(ntb, type); + ctrl->command_status = COMMAND_STATUS_OK; + break; + case COMMAND_CONFIGURE_MW: + ret = epf_ntb_configure_mw(ntb, type, argument); + if (ret < 0) + ctrl->command_status = COMMAND_STATUS_ERROR; + else + ctrl->command_status = COMMAND_STATUS_OK; + break; + case COMMAND_TEARDOWN_MW: + epf_ntb_teardown_mw(ntb, type, argument); + ctrl->command_status = COMMAND_STATUS_OK; + break; + case COMMAND_LINK_UP: + ntb_epc->linkup = true; + if (ntb->epc[PRIMARY_INTERFACE]->linkup && + ntb->epc[SECONDARY_INTERFACE]->linkup) { + ret = epf_ntb_link_up(ntb, true); + if (ret < 0) + ctrl->command_status = COMMAND_STATUS_ERROR; + else + ctrl->command_status = COMMAND_STATUS_OK; + goto reset_handler; + } + ctrl->command_status = COMMAND_STATUS_OK; + break; + case COMMAND_LINK_DOWN: + ntb_epc->linkup = false; + ret = epf_ntb_link_up(ntb, false); + if (ret < 0) + ctrl->command_status = COMMAND_STATUS_ERROR; + else + ctrl->command_status = COMMAND_STATUS_OK; + break; + default: + dev_err(dev, "%s intf UNKNOWN command: %d\n", + pci_epc_interface_string(type), command); + break; + } + +reset_handler: + queue_delayed_work(kpcintb_workqueue, &ntb_epc->cmd_handler, + msecs_to_jiffies(5)); +} + +/** + * epf_ntb_peer_spad_bar_clear() - Clears Peer Scratchpad BAR + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * + *+-----------------+------->+------------------+ +-----------------+ + *| BAR0 | | CONFIG REGION | | BAR0 | + *+-----------------+----+ +------------------+<-------+-----------------+ + *| BAR1 | | |SCRATCHPAD REGION | | BAR1 | + *+-----------------+ +-->+------------------+<-------+-----------------+ + *| BAR2 | Local Memory | BAR2 | + *+-----------------+ +-----------------+ + *| BAR3 | | BAR3 | + *+-----------------+ +-----------------+ + *| BAR4 | | BAR4 | + *+-----------------+ +-----------------+ + *| BAR5 | | BAR5 | + *+-----------------+ +-----------------+ + * EP CONTROLLER 1 EP CONTROLLER 2 + * + * It clears BAR1 of EP CONTROLLER 2 which contains the HOST2's peer scratchpad + * region. While BAR1 is the default peer scratchpad BAR, an NTB could have + * other BARs for peer scratchpad (because of 64-bit BARs or reserved BARs). + * This function can get the exact BAR used for peer scratchpad from + * epf_ntb_bar[BAR_PEER_SPAD]. + * + * Since HOST2's peer scratchpad is also HOST1's self scratchpad, this function + * gets the address of peer scratchpad from + * peer_ntb_epc->epf_ntb_bar[BAR_CONFIG] + */ +static void epf_ntb_peer_spad_bar_clear(struct epf_ntb_epc *ntb_epc) +{ + struct pci_epf_bar *epf_bar; + enum pci_barno barno; + struct pci_epc *epc; + u8 func_no; + + epc = ntb_epc->epc; + func_no = ntb_epc->func_no; + barno = ntb_epc->epf_ntb_bar[BAR_PEER_SPAD]; + epf_bar = &ntb_epc->epf_bar[barno]; + pci_epc_clear_bar(epc, func_no, epf_bar); +} + +/** + * epf_ntb_peer_spad_bar_set() - Sets peer scratchpad BAR + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * + *+-----------------+------->+------------------+ +-----------------+ + *| BAR0 | | CONFIG REGION | | BAR0 | + *+-----------------+----+ +------------------+<-------+-----------------+ + *| BAR1 | | |SCRATCHPAD REGION | | BAR1 | + *+-----------------+ +-->+------------------+<-------+-----------------+ + *| BAR2 | Local Memory | BAR2 | + *+-----------------+ +-----------------+ + *| BAR3 | | BAR3 | + *+-----------------+ +-----------------+ + *| BAR4 | | BAR4 | + *+-----------------+ +-----------------+ + *| BAR5 | | BAR5 | + *+-----------------+ +-----------------+ + * EP CONTROLLER 1 EP CONTROLLER 2 + * + * It sets BAR1 of EP CONTROLLER 2 which contains the HOST2's peer scratchpad + * region. While BAR1 is the default peer scratchpad BAR, an NTB could have + * other BARs for peer scratchpad (because of 64-bit BARs or reserved BARs). + * This function can get the exact BAR used for peer scratchpad from + * epf_ntb_bar[BAR_PEER_SPAD]. + * + * Since HOST2's peer scratchpad is also HOST1's self scratchpad, this function + * gets the address of peer scratchpad from + * peer_ntb_epc->epf_ntb_bar[BAR_CONFIG] + */ +static int +epf_ntb_peer_spad_bar_set(struct epf_ntb *ntb, enum pci_epc_interface_type type) +{ + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc; + struct pci_epf_bar *peer_epf_bar, *epf_bar; + enum pci_barno peer_barno, barno; + u32 peer_spad_offset; + struct pci_epc *epc; + struct device *dev; + u8 func_no; + int ret; + + dev = &ntb->epf->dev; + + peer_ntb_epc = ntb->epc[!type]; + peer_barno = peer_ntb_epc->epf_ntb_bar[BAR_CONFIG]; + peer_epf_bar = &peer_ntb_epc->epf_bar[peer_barno]; + + ntb_epc = ntb->epc[type]; + barno = ntb_epc->epf_ntb_bar[BAR_PEER_SPAD]; + epf_bar = &ntb_epc->epf_bar[barno]; + func_no = ntb_epc->func_no; + epc = ntb_epc->epc; + + peer_spad_offset = peer_ntb_epc->reg->spad_offset; + epf_bar->phys_addr = peer_epf_bar->phys_addr + peer_spad_offset; + epf_bar->size = peer_ntb_epc->spad_size; + epf_bar->barno = barno; + epf_bar->flags = PCI_BASE_ADDRESS_MEM_TYPE_32; + + ret = pci_epc_set_bar(ntb_epc->epc, func_no, epf_bar); + if (ret) { + dev_err(dev, "%s intf: peer SPAD BAR set failed\n", + pci_epc_interface_string(type)); + return ret; + } + + return 0; +} + +/** + * epf_ntb_config_sspad_bar_clear() - Clears Config + Self scratchpad BAR + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * + *+-----------------+------->+------------------+ +-----------------+ + *| BAR0 | | CONFIG REGION | | BAR0 | + *+-----------------+----+ +------------------+<-------+-----------------+ + *| BAR1 | | |SCRATCHPAD REGION | | BAR1 | + *+-----------------+ +-->+------------------+<-------+-----------------+ + *| BAR2 | Local Memory | BAR2 | + *+-----------------+ +-----------------+ + *| BAR3 | | BAR3 | + *+-----------------+ +-----------------+ + *| BAR4 | | BAR4 | + *+-----------------+ +-----------------+ + *| BAR5 | | BAR5 | + *+-----------------+ +-----------------+ + * EP CONTROLLER 1 EP CONTROLLER 2 + * + * It clears BAR0 of EP CONTROLLER 1 which contains the HOST1's config and + * self scratchpad region (removes inbound ATU configuration). While BAR0 is + * the default self scratchpad BAR, an NTB could have other BARs for self + * scratchpad (because of reserved BARs). This function can get the exact BAR + * used for self scratchpad from epf_ntb_bar[BAR_CONFIG]. + * + * Please note the self scratchpad region and config region is combined to + * a single region and mapped using the same BAR. Also note HOST2's peer + * scratchpad is HOST1's self scratchpad. + */ +static void epf_ntb_config_sspad_bar_clear(struct epf_ntb_epc *ntb_epc) +{ + struct pci_epf_bar *epf_bar; + enum pci_barno barno; + struct pci_epc *epc; + u8 func_no; + + epc = ntb_epc->epc; + func_no = ntb_epc->func_no; + barno = ntb_epc->epf_ntb_bar[BAR_CONFIG]; + epf_bar = &ntb_epc->epf_bar[barno]; + pci_epc_clear_bar(epc, func_no, epf_bar); +} + +/** + * epf_ntb_config_sspad_bar_set() - Sets Config + Self scratchpad BAR + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * + *+-----------------+------->+------------------+ +-----------------+ + *| BAR0 | | CONFIG REGION | | BAR0 | + *+-----------------+----+ +------------------+<-------+-----------------+ + *| BAR1 | | |SCRATCHPAD REGION | | BAR1 | + *+-----------------+ +-->+------------------+<-------+-----------------+ + *| BAR2 | Local Memory | BAR2 | + *+-----------------+ +-----------------+ + *| BAR3 | | BAR3 | + *+-----------------+ +-----------------+ + *| BAR4 | | BAR4 | + *+-----------------+ +-----------------+ + *| BAR5 | | BAR5 | + *+-----------------+ +-----------------+ + * EP CONTROLLER 1 EP CONTROLLER 2 + * + * It maps BAR0 of EP CONTROLLER 1 which contains the HOST1's config and + * self scratchpad region. While BAR0 is the default self scratchpad BAR, an + * NTB could have other BARs for self scratchpad (because of reserved BARs). + * This function can get the exact BAR used for self scratchpad from + * epf_ntb_bar[BAR_CONFIG]. + * + * Please note the self scratchpad region and config region is combined to + * a single region and mapped using the same BAR. Also note HOST2's peer + * scratchpad is HOST1's self scratchpad. + */ +static int epf_ntb_config_sspad_bar_set(struct epf_ntb_epc *ntb_epc) +{ + struct pci_epf_bar *epf_bar; + enum pci_barno barno; + struct epf_ntb *ntb; + struct pci_epc *epc; + struct device *dev; + u8 func_no; + int ret; + + ntb = ntb_epc->epf_ntb; + dev = &ntb->epf->dev; + + epc = ntb_epc->epc; + func_no = ntb_epc->func_no; + barno = ntb_epc->epf_ntb_bar[BAR_CONFIG]; + epf_bar = &ntb_epc->epf_bar[barno]; + + ret = pci_epc_set_bar(epc, func_no, epf_bar); + if (ret) { + dev_err(dev, "%s inft: Config/Status/SPAD BAR set failed\n", + pci_epc_interface_string(ntb_epc->type)); + return ret; + } + + return 0; +} + +/** + * epf_ntb_config_spad_bar_free() - Free the physical memory associated with + * config + scratchpad region + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * + *+-----------------+------->+------------------+ +-----------------+ + *| BAR0 | | CONFIG REGION | | BAR0 | + *+-----------------+----+ +------------------+<-------+-----------------+ + *| BAR1 | | |SCRATCHPAD REGION | | BAR1 | + *+-----------------+ +-->+------------------+<-------+-----------------+ + *| BAR2 | Local Memory | BAR2 | + *+-----------------+ +-----------------+ + *| BAR3 | | BAR3 | + *+-----------------+ +-----------------+ + *| BAR4 | | BAR4 | + *+-----------------+ +-----------------+ + *| BAR5 | | BAR5 | + *+-----------------+ +-----------------+ + * EP CONTROLLER 1 EP CONTROLLER 2 + * + * This function frees the Local Memory mentioned in the above diagram. After + * invoking this function, any of config + self scrathpad region of HOST1 or + * peer scratchpad region of HOST2 should not be accessed. + */ +static void epf_ntb_config_spad_bar_free(struct epf_ntb *ntb) +{ + enum pci_epc_interface_type type; + struct epf_ntb_epc *ntb_epc; + enum pci_barno barno; + struct pci_epf *epf; + + epf = ntb->epf; + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++) { + ntb_epc = ntb->epc[type]; + barno = ntb_epc->epf_ntb_bar[BAR_CONFIG]; + if (ntb_epc->reg) + pci_epf_free_space(epf, ntb_epc->reg, barno, type); + } +} + +/** + * epf_ntb_config_spad_bar_alloc() - Allocate memory for config + scratchpad + * region + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * @type: PRIMARY interface or SECONDARY interface + * + *+-----------------+------->+------------------+ +-----------------+ + *| BAR0 | | CONFIG REGION | | BAR0 | + *+-----------------+----+ +------------------+<-------+-----------------+ + *| BAR1 | | |SCRATCHPAD REGION | | BAR1 | + *+-----------------+ +-->+------------------+<-------+-----------------+ + *| BAR2 | Local Memory | BAR2 | + *+-----------------+ +-----------------+ + *| BAR3 | | BAR3 | + *+-----------------+ +-----------------+ + *| BAR4 | | BAR4 | + *+-----------------+ +-----------------+ + *| BAR5 | | BAR5 | + *+-----------------+ +-----------------+ + * EP CONTROLLER 1 EP CONTROLLER 2 + * + * This function allocates the Local Memory mentioned in the above diagram. + * The size of CONFIG REGION is sizeof(struct epf_ntb_ctrl) and size of + * SCRATCHPAD REGION is obtained from "spad-count" device tree property. + * + * The size of both config region and scratchpad region has to be aligned, + * since the scratchpad region will also be mapped as PEER SCRATCHPAD of + * other host using a separate BAR. + */ +static int +epf_ntb_config_spad_bar_alloc(struct epf_ntb *ntb, + enum pci_epc_interface_type type) +{ + const struct pci_epc_features *peer_epc_features, *epc_features; + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc; + size_t msix_table_size, pba_size, align; + enum pci_barno peer_barno, barno; + struct epf_ntb_ctrl *ctrl; + u32 spad_size, ctrl_size; + u64 size, peer_size; + struct pci_epc *epc; + struct pci_epf *epf; + struct device *dev; + bool msix_capable; + u32 spad_count; + void *base; + + epf = ntb->epf; + dev = &epf->dev; + ntb_epc = ntb->epc[type]; + epc = ntb_epc->epc; + + epc_features = ntb_epc->epc_features; + barno = ntb_epc->epf_ntb_bar[BAR_CONFIG]; + size = epc_features->bar_fixed_size[barno]; + align = epc_features->align; + + peer_ntb_epc = ntb->epc[!type]; + peer_epc_features = peer_ntb_epc->epc_features; + peer_barno = ntb_epc->epf_ntb_bar[BAR_PEER_SPAD]; + peer_size = peer_epc_features->bar_fixed_size[barno]; + + /* Check if epc_features is populated incorrectly */ + if ((!IS_ALIGNED(size, align))) + return -EINVAL; + + spad_count = ntb->spad_count; + + ctrl_size = sizeof(struct epf_ntb_ctrl); + spad_size = spad_count * 4; + + msix_capable = epc_features->msix_capable; + if (msix_capable) { + msix_table_size = PCI_MSIX_ENTRY_SIZE * ntb->db_count; + ctrl_size = ALIGN(ctrl_size, 8); + ntb_epc->msix_table_offset = ctrl_size; + ntb_epc->msix_bar = barno; + /* Align to QWORD or 8 Bytes */ + pba_size = ALIGN(DIV_ROUND_UP(ntb->db_count, 8), 8); + ctrl_size = ctrl_size + msix_table_size + pba_size; + } + + if (!align) { + ctrl_size = roundup_pow_of_two(ctrl_size); + spad_size = roundup_pow_of_two(spad_size); + } else { + ctrl_size = ALIGN(ctrl_size, align); + spad_size = ALIGN(spad_size, align); + } + + if (peer_size) { + if (peer_size < spad_size) + spad_count = peer_size / 4; + spad_size = peer_size; + } + + /* + * In order to make sure SPAD offset is aligned to its size, + * expand control region size to the size of SPAD if SPAD size + * is greater than control region size. + */ + if (spad_size > ctrl_size) + ctrl_size = spad_size; + + if (!size) + size = ctrl_size + spad_size; + else if (size < ctrl_size + spad_size) + return -EINVAL; + + base = pci_epf_alloc_space(epf, size, barno, align, type); + if (!base) { + dev_err(dev, "%s intf: Config/Status/SPAD alloc region fail\n", + pci_epc_interface_string(type)); + return -ENOMEM; + } + + ntb_epc->reg = base; + + ctrl = ntb_epc->reg; + ctrl->spad_offset = ctrl_size; + ctrl->spad_count = spad_count; + ctrl->num_mws = ntb->num_mws; + ctrl->db_entry_size = align ? align : 4; + ntb_epc->spad_size = spad_size; + + return 0; +} + +/** + * epf_ntb_config_spad_bar_alloc_interface() - Allocate memory for config + + * scratchpad region for each of PRIMARY and SECONDARY interface + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * + * Wrapper for epf_ntb_config_spad_bar_alloc() which allocates memory for + * config + scratchpad region for a specific interface + */ +static int epf_ntb_config_spad_bar_alloc_interface(struct epf_ntb *ntb) +{ + enum pci_epc_interface_type type; + struct device *dev; + int ret; + + dev = &ntb->epf->dev; + + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++) { + ret = epf_ntb_config_spad_bar_alloc(ntb, type); + if (ret) { + dev_err(dev, "%s intf: Config/SPAD BAR alloc failed\n", + pci_epc_interface_string(type)); + return ret; + } + } + + return 0; +} + +/** + * epf_ntb_free_peer_mem() - Free's memory allocated in peers outbound address + * space + * @ntb_epc: EPC associated with one of the HOST which holds peers outbound + * address regions + * + *+-----------------+ +----->+----------------+-----------+-----------------+ + *| BAR0 | | | Doorbell 1 +-----------> MSI|X ADDRESS 1 | + *+-----------------+ | +----------------+ +-----------------+ + *| BAR1 | | | Doorbell 2 +---------+ | | + *+-----------------+----+ +----------------+ | | | + *| BAR2 | | Doorbell 3 +-------+ | +-----------------+ + *+-----------------+----+ +----------------+ | +-> MSI|X ADDRESS 2 | + *| BAR3 | | | Doorbell 4 +-----+ | +-----------------+ + *+-----------------+ | |----------------+ | | | | + *| BAR4 | | | | | | +-----------------+ + *+-----------------+ | | MW1 +---+ | +-->+ MSI|X ADDRESS 3|| + *| BAR5 | | | | | | +-----------------+ + *+-----------------+ +----->-----------------+ | | | | + * EP CONTROLLER 1 | | | | +-----------------+ + * | | | +---->+ MSI|X ADDRESS 4 | + * +----------------+ | +-----------------+ + * (A) EP CONTROLLER 2 | | | + * (OB SPACE) | | | + * +-------> MW1 | + * | | + * | | + * (B) +-----------------+ + * | | + * | | + * | | + * | | + * | | + * +-----------------+ + * PCI Address Space + * (Managed by HOST2) + * + * This function frees memory allocated in EP CONTROLLER 2 (OB SPACE) in the + * above diagram. It'll free Doorbell 1, Doorbell 2, Doorbell 3, Doorbell 4, + * MW1 (and MW2, MW3, MW4). + */ +static void epf_ntb_free_peer_mem(struct epf_ntb_epc *ntb_epc) +{ + struct pci_epf_bar *epf_bar; + void __iomem *mw_addr; + phys_addr_t phys_addr; + enum epf_ntb_bar bar; + enum pci_barno barno; + struct pci_epc *epc; + size_t size; + + epc = ntb_epc->epc; + + for (bar = BAR_DB_MW1; bar < BAR_MW4; bar++) { + barno = ntb_epc->epf_ntb_bar[bar]; + mw_addr = ntb_epc->mw_addr[barno]; + epf_bar = &ntb_epc->epf_bar[barno]; + phys_addr = epf_bar->phys_addr; + size = epf_bar->size; + if (mw_addr) { + pci_epc_mem_free_addr(epc, phys_addr, mw_addr, size); + ntb_epc->mw_addr[barno] = NULL; + } + } +} + +/** + * epf_ntb_db_mw_bar_clear() - Clears doorbell and memory BAR + * @ntb_epc: EPC associated with one of the HOST which holds peers outbound + * address + * + *+-----------------+ +----->+----------------+-----------+-----------------+ + *| BAR0 | | | Doorbell 1 +-----------> MSI|X ADDRESS 1 | + *+-----------------+ | +----------------+ +-----------------+ + *| BAR1 | | | Doorbell 2 +---------+ | | + *+-----------------+----+ +----------------+ | | | + *| BAR2 | | Doorbell 3 +-------+ | +-----------------+ + *+-----------------+----+ +----------------+ | +-> MSI|X ADDRESS 2 | + *| BAR3 | | | Doorbell 4 +-----+ | +-----------------+ + *+-----------------+ | |----------------+ | | | | + *| BAR4 | | | | | | +-----------------+ + *+-----------------+ | | MW1 +---+ | +-->+ MSI|X ADDRESS 3|| + *| BAR5 | | | | | | +-----------------+ + *+-----------------+ +----->-----------------+ | | | | + * EP CONTROLLER 1 | | | | +-----------------+ + * | | | +---->+ MSI|X ADDRESS 4 | + * +----------------+ | +-----------------+ + * (A) EP CONTROLLER 2 | | | + * (OB SPACE) | | | + * +-------> MW1 | + * | | + * | | + * (B) +-----------------+ + * | | + * | | + * | | + * | | + * | | + * +-----------------+ + * PCI Address Space + * (Managed by HOST2) + * + * This function clears doorbell and memory BARs (remove inbound ATU + * configuration). In the above diagram it clears BAR2 TO BAR5 of EP + * CONTROLLER 1 (Doorbell BAR, MW1 BAR, MW2 BAR, MW3 BAR and MW4 BAR). + */ +static void epf_ntb_db_mw_bar_clear(struct epf_ntb_epc *ntb_epc) +{ + struct pci_epf_bar *epf_bar; + enum epf_ntb_bar bar; + enum pci_barno barno; + struct pci_epc *epc; + u8 func_no; + + epc = ntb_epc->epc; + + func_no = ntb_epc->func_no; + + for (bar = BAR_DB_MW1; bar < BAR_MW4; bar++) { + barno = ntb_epc->epf_ntb_bar[bar]; + epf_bar = &ntb_epc->epf_bar[barno]; + pci_epc_clear_bar(epc, func_no, epf_bar); + } +} + +/** + * epf_ntb_db_mw_bar_cleanup() - Clears doorbell/memory BAR and free memory + * allocated in peers outbound address space + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * @type: PRIMARY interface or SECONDARY interface + * + * This function is a wrapper for epf_ntb_db_mw_bar_clear() which clears + * HOST1's BAR and epf_ntb_free_peer_mem() which frees up HOST2 outbound + * memory. + */ +static void epf_ntb_db_mw_bar_cleanup(struct epf_ntb *ntb, + enum pci_epc_interface_type type) +{ + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc; + + ntb_epc = ntb->epc[type]; + peer_ntb_epc = ntb->epc[!type]; + + epf_ntb_db_mw_bar_clear(ntb_epc); + epf_ntb_free_peer_mem(peer_ntb_epc); +} + +/** + * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capaiblity + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * @type: PRIMARY interface or SECONDARY interface + * + * Configures MSI/MSI-X capability for each interface with number of + * interrupts equal to "db-count" device tree parameter. + */ +static int epf_ntb_configure_interrupt(struct epf_ntb *ntb, + enum pci_epc_interface_type type) +{ + const struct pci_epc_features *epc_features; + bool msix_capable, msi_capable; + struct epf_ntb_epc *ntb_epc; + struct pci_epc *epc; + struct device *dev; + u32 db_count; + u8 func_no; + int ret; + + ntb_epc = ntb->epc[type]; + dev = &ntb->epf->dev; + + epc_features = ntb_epc->epc_features; + msix_capable = epc_features->msix_capable; + msi_capable = epc_features->msi_capable; + + if (!(msix_capable || msi_capable)) { + dev_err(dev, "MSI or MSI-X is required for doorbell\n"); + return -EINVAL; + } + + func_no = ntb_epc->func_no; + + db_count = ntb->db_count; + if (db_count > MAX_DB_COUNT) { + dev_err(dev, "DB count cannot be more than %d\n", MAX_DB_COUNT); + return -EINVAL; + } + + ntb->db_count = db_count; + epc = ntb_epc->epc; + + if (msi_capable) { + ret = pci_epc_set_msi(epc, func_no, db_count); + if (ret) { + dev_err(dev, "%s intf: MSI configuration failed\n", + pci_epc_interface_string(type)); + return ret; + } + } + + if (msix_capable) { + ret = pci_epc_set_msix(epc, func_no, db_count, + ntb_epc->msix_bar, + ntb_epc->msix_table_offset); + if (ret) { + dev_err(dev, "MSI configuration failed\n"); + return ret; + } + } + + return 0; +} + +/** + * epf_ntb_alloc_peer_mem() - Allocate memory in peers outbound address space + * @ntb_epc: EPC associated with one of the HOST whose BAR holds peers outbound + * address + * @bar: BAR of @ntb_epc in for which memory has to be allocated (could be + * BAR_DB_MW1, BAR_MW2, BAR_MW3, BAR_MW4) + * @peer_ntb_epc: EPC associated with HOST whose outbound address space is + * used by @ntb_epc + * @size: Size of the address region that has to be allocated in peers OB SPACE + * + * + *+-----------------+ +----->+----------------+-----------+-----------------+ + *| BAR0 | | | Doorbell 1 +-----------> MSI|X ADDRESS 1 | + *+-----------------+ | +----------------+ +-----------------+ + *| BAR1 | | | Doorbell 2 +---------+ | | + *+-----------------+----+ +----------------+ | | | + *| BAR2 | | Doorbell 3 +-------+ | +-----------------+ + *+-----------------+----+ +----------------+ | +-> MSI|X ADDRESS 2 | + *| BAR3 | | | Doorbell 4 +-----+ | +-----------------+ + *+-----------------+ | |----------------+ | | | | + *| BAR4 | | | | | | +-----------------+ + *+-----------------+ | | MW1 +---+ | +-->+ MSI|X ADDRESS 3|| + *| BAR5 | | | | | | +-----------------+ + *+-----------------+ +----->-----------------+ | | | | + * EP CONTROLLER 1 | | | | +-----------------+ + * | | | +---->+ MSI|X ADDRESS 4 | + * +----------------+ | +-----------------+ + * (A) EP CONTROLLER 2 | | | + * (OB SPACE) | | | + * +-------> MW1 | + * | | + * | | + * (B) +-----------------+ + * | | + * | | + * | | + * | | + * | | + * +-----------------+ + * PCI Address Space + * (Managed by HOST2) + * + * This function allocates memory in OB space of EP CONTROLLER 2 in the + * above diagram. It'll allocate for Doorbell 1, Doorbell 2, Doorbell 3, + * Doorbell 4, MW1 (and MW2, MW3, MW4). + */ +static int +epf_ntb_alloc_peer_mem(struct device *dev, struct epf_ntb_epc *ntb_epc, + enum epf_ntb_bar bar, struct epf_ntb_epc *peer_ntb_epc, + size_t size) +{ + const struct pci_epc_features *epc_features; + struct pci_epf_bar *epf_bar; + struct pci_epc *peer_epc; + phys_addr_t phys_addr; + void __iomem *mw_addr; + enum pci_barno barno; + size_t align; + + epc_features = ntb_epc->epc_features; + align = epc_features->align; + + if (size < 128) + size = 128; + + if (align) + size = ALIGN(size, align); + else + size = roundup_pow_of_two(size); + + peer_epc = peer_ntb_epc->epc; + mw_addr = pci_epc_mem_alloc_addr(peer_epc, &phys_addr, size); + if (!mw_addr) { + dev_err(dev, "%s intf: Failed to allocate OB address\n", + pci_epc_interface_string(peer_ntb_epc->type)); + return -ENOMEM; + } + + barno = ntb_epc->epf_ntb_bar[bar]; + epf_bar = &ntb_epc->epf_bar[barno]; + ntb_epc->mw_addr[barno] = mw_addr; + + epf_bar->phys_addr = phys_addr; + epf_bar->size = size; + epf_bar->barno = barno; + epf_bar->flags = PCI_BASE_ADDRESS_MEM_TYPE_32; + + return 0; +} + +/** + * epf_ntb_db_mw_bar_init() - Configure Doorbell and Memory window BARs + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * @type: PRIMARY interface or SECONDARY interface + * + * Wrapper for epf_ntb_alloc_peer_mem() and pci_epc_set_bar() that allocates + * memory in OB address space of HOST2 and configures BAR of HOST1 + */ +static int epf_ntb_db_mw_bar_init(struct epf_ntb *ntb, + enum pci_epc_interface_type type) +{ + const struct pci_epc_features *epc_features; + struct epf_ntb_epc *peer_ntb_epc, *ntb_epc; + struct pci_epf_bar *epf_bar; + struct epf_ntb_ctrl *ctrl; + u32 num_mws, db_count; + enum epf_ntb_bar bar; + enum pci_barno barno; + struct pci_epc *epc; + struct device *dev; + size_t align; + int ret, i; + u8 func_no; + u64 size; + + ntb_epc = ntb->epc[type]; + peer_ntb_epc = ntb->epc[!type]; + + dev = &ntb->epf->dev; + epc_features = ntb_epc->epc_features; + align = epc_features->align; + func_no = ntb_epc->func_no; + epc = ntb_epc->epc; + num_mws = ntb->num_mws; + db_count = ntb->db_count; + + for (bar = BAR_DB_MW1, i = 0; i < num_mws; bar++, i++) { + if (bar == BAR_DB_MW1) { + align = align ? align : 4; + size = db_count * align; + size = ALIGN(size, ntb->mws_size[i]); + ctrl = ntb_epc->reg; + ctrl->mw1_offset = size; + size += ntb->mws_size[i]; + } else { + size = ntb->mws_size[i]; + } + + ret = epf_ntb_alloc_peer_mem(dev, ntb_epc, bar, + peer_ntb_epc, size); + if (ret) + goto err_alloc_peer_mem; + + barno = ntb_epc->epf_ntb_bar[bar]; + epf_bar = &ntb_epc->epf_bar[barno]; + + ret = pci_epc_set_bar(epc, func_no, epf_bar); + if (ret) { + dev_err(dev, "%s intf: DoorBell BAR set failed\n", + pci_epc_interface_string(type)); + goto err_alloc_peer_mem; + } + } + + return 0; + +err_alloc_peer_mem: + epf_ntb_db_mw_bar_cleanup(ntb, type); + + return ret; +} + +/** + * epf_ntb_epc_destroy_interface() - Cleanup NTB EPC interface + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * @type: PRIMARY interface or SECONDARY interface + * + * Unbind NTB function device from EPC and Relinquish reference to pci_epc + * for each of the interface. + */ +static void epf_ntb_epc_destroy_interface(struct epf_ntb *ntb, + enum pci_epc_interface_type type) +{ + struct epf_ntb_epc *ntb_epc; + struct pci_epc *epc; + struct pci_epf *epf; + + if (type < 0) + return; + + epf = ntb->epf; + ntb_epc = ntb->epc[type]; + if (!ntb_epc) + return; + epc = ntb_epc->epc; + pci_epc_remove_epf(epc, epf, type); + pci_epc_put(epc); +} + +/** + * epf_ntb_epc_destroy() - Cleanup NTB EPC interface + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * + * Wrapper for epf_ntb_epc_destroy_interface() to cleanup all the NTB interfaces + */ +static void epf_ntb_epc_destroy(struct epf_ntb *ntb) +{ + enum pci_epc_interface_type type; + + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++) + epf_ntb_epc_destroy_interface(ntb, type); +} + +/** + * epf_ntb_epc_create_interface() - Create and initialize NTB EPC interface + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * @epc: struct pci_epc to which a particular NTB interface should be associated + * @type: PRIMARY interface or SECONDARY interface + * + * Allocate memory for NTB EPC interface and initialize it. + */ +static int +epf_ntb_epc_create_interface(struct epf_ntb *ntb, struct pci_epc *epc, + enum pci_epc_interface_type type) +{ + const struct pci_epc_features *epc_features; + struct pci_epf_bar *epf_bar; + struct epf_ntb_epc *ntb_epc; + struct pci_epf *epf; + struct device *dev; + u8 func_no; + + dev = &ntb->epf->dev; + + ntb_epc = devm_kzalloc(dev, sizeof(*ntb_epc), GFP_KERNEL); + if (!ntb_epc) + return -ENOMEM; + + epf = ntb->epf; + if (type == PRIMARY_INTERFACE) { + func_no = epf->func_no; + epf_bar = epf->bar; + } else { + func_no = epf->sec_epc_func_no; + epf_bar = epf->sec_epc_bar; + } + + ntb_epc->linkup = false; + ntb_epc->epc = epc; + ntb_epc->func_no = func_no; + ntb_epc->type = type; + ntb_epc->epf_bar = epf_bar; + ntb_epc->epf_ntb = ntb; + + epc_features = pci_epc_get_features(epc, func_no); + if (!epc_features) + return -EINVAL; + ntb_epc->epc_features = epc_features; + + ntb->epc[type] = ntb_epc; + + return 0; +} + +/** + * epf_ntb_epc_create() - Create and initialize NTB EPC interface + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * + * Get a reference to EPC device and bind NTB function device to that EPC + * for each of the interface. It is also a wrapper to + * epf_ntb_epc_create_interface() to allocate memory for NTB EPC interface + * and initialize it + */ +static int epf_ntb_epc_create(struct epf_ntb *ntb) +{ + struct pci_epf *epf; + struct device *dev; + int ret; + + epf = ntb->epf; + dev = &epf->dev; + + ret = epf_ntb_epc_create_interface(ntb, epf->epc, PRIMARY_INTERFACE); + if (ret) { + dev_err(dev, "PRIMARY intf: Fail to create NTB EPC\n"); + return ret; + } + + ret = epf_ntb_epc_create_interface(ntb, epf->sec_epc, + SECONDARY_INTERFACE); + if (ret) { + dev_err(dev, "SECONDARY intf: Fail to create NTB EPC\n"); + goto err_epc_create; + } + + return 0; + +err_epc_create: + epf_ntb_epc_destroy_interface(ntb, PRIMARY_INTERFACE); + + return ret; +} + +/** + * epf_ntb_init_epc_bar_interface() - Identify BARs to be used for each of + * the NTB constructs (scratchpad region, doorbell, memorywindow) + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * @type: PRIMARY interface or SECONDARY interface + * + * Identify the free BAR's to be used for each of BAR_CONFIG, BAR_PEER_SPAD, + * BAR_DB_MW1, BAR_MW2, BAR_MW3 and BAR_MW4. + */ +static int epf_ntb_init_epc_bar_interface(struct epf_ntb *ntb, + enum pci_epc_interface_type type) +{ + const struct pci_epc_features *epc_features; + struct epf_ntb_epc *ntb_epc; + enum pci_barno barno; + enum epf_ntb_bar bar; + struct device *dev; + u32 num_mws; + int i; + + barno = BAR_0; + ntb_epc = ntb->epc[type]; + num_mws = ntb->num_mws; + dev = &ntb->epf->dev; + epc_features = ntb_epc->epc_features; + + /* These are required BARs which are mandatory for NTB functionality */ + for (bar = BAR_CONFIG; bar <= BAR_DB_MW1; bar++, barno++) { + barno = pci_epc_get_next_free_bar(epc_features, barno); + if (barno < 0) { + dev_err(dev, "%s intf: Fail to get NTB function BAR\n", + pci_epc_interface_string(type)); + return barno; + } + ntb_epc->epf_ntb_bar[bar] = barno; + } + + /* These are optional BARs which doesn't impact NTB functionality */ + for (bar = BAR_MW2, i = 1; i < num_mws; bar++, barno++, i++) { + barno = pci_epc_get_next_free_bar(epc_features, barno); + if (barno < 0) { + ntb->num_mws = i; + dev_dbg(dev, "BAR not available for > MW%d\n", i + 1); + } + ntb_epc->epf_ntb_bar[bar] = barno; + } + + return 0; +} + +/** + * epf_ntb_init_epc_bar() - Identify BARs to be used for each of the NTB + * constructs (scratchpad region, doorbell, memorywindow) + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * @type: PRIMARY interface or SECONDARY interface + * + * Wrapper to epf_ntb_init_epc_bar_interface() to identify the free BAR's + * to be used for each of BAR_CONFIG, BAR_PEER_SPAD, BAR_DB_MW1, BAR_MW2, + * BAR_MW3 and BAR_MW4 for all the interfaces. + */ +static int epf_ntb_init_epc_bar(struct epf_ntb *ntb) +{ + enum pci_epc_interface_type type; + struct device *dev; + int ret; + + dev = &ntb->epf->dev; + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++) { + ret = epf_ntb_init_epc_bar_interface(ntb, type); + if (ret) { + dev_err(dev, "Fail to init EPC bar for %s interface\n", + pci_epc_interface_string(type)); + return ret; + } + } + + return 0; +} + +/** + * epf_ntb_epc_init_interface() - Initialize NTB interface + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * @type: PRIMARY interface or SECONDARY interface + * + * Wrapper to initialize a particular EPC interface and start the workqueue + * to check for commands from host. This function will write to the + * EP controller HW for configuring it. + */ +static int epf_ntb_epc_init_interface(struct epf_ntb *ntb, + enum pci_epc_interface_type type) +{ + struct epf_ntb_epc *ntb_epc; + struct pci_epc *epc; + struct pci_epf *epf; + struct device *dev; + u8 func_no; + int ret; + + ntb_epc = ntb->epc[type]; + epf = ntb->epf; + dev = &epf->dev; + epc = ntb_epc->epc; + func_no = ntb_epc->func_no; + + ret = epf_ntb_config_sspad_bar_set(ntb->epc[type]); + if (ret) { + dev_err(dev, "%s intf: Config/self SPAD BAR init failed\n", + pci_epc_interface_string(type)); + return ret; + } + + ret = epf_ntb_peer_spad_bar_set(ntb, type); + if (ret) { + dev_err(dev, "%s intf: Peer SPAD BAR init failed\n", + pci_epc_interface_string(type)); + goto err_peer_spad_bar_init; + } + + ret = epf_ntb_configure_interrupt(ntb, type); + if (ret) { + dev_err(dev, "%s intf: Interrupt configuration failed\n", + pci_epc_interface_string(type)); + goto err_peer_spad_bar_init; + } + + ret = epf_ntb_db_mw_bar_init(ntb, type); + if (ret) { + dev_err(dev, "%s intf: DB/MW BAR init failed\n", + pci_epc_interface_string(type)); + goto err_db_mw_bar_init; + } + + ret = pci_epc_write_header(epc, func_no, epf->header); + if (ret) { + dev_err(dev, "%s intf: Configuration header write failed\n", + pci_epc_interface_string(type)); + goto err_write_header; + } + + INIT_DELAYED_WORK(&ntb->epc[type]->cmd_handler, epf_ntb_cmd_handler); + queue_work(kpcintb_workqueue, &ntb->epc[type]->cmd_handler.work); + + return 0; + +err_write_header: + epf_ntb_db_mw_bar_cleanup(ntb, type); + +err_db_mw_bar_init: + epf_ntb_peer_spad_bar_clear(ntb->epc[type]); + +err_peer_spad_bar_init: + epf_ntb_config_sspad_bar_clear(ntb->epc[type]); + + return ret; +} + +/** + * epf_ntb_epc_cleanup_interface() - Cleanup NTB interface + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * @type: PRIMARY interface or SECONDARY interface + * + * Wrapper to cleanup a particular NTB interface. + */ +static void epf_ntb_epc_cleanup_interface(struct epf_ntb *ntb, + enum pci_epc_interface_type type) +{ + struct epf_ntb_epc *ntb_epc; + + if (type < 0) + return; + + ntb_epc = ntb->epc[type]; + cancel_delayed_work(&ntb_epc->cmd_handler); + epf_ntb_db_mw_bar_cleanup(ntb, type); + epf_ntb_peer_spad_bar_clear(ntb_epc); + epf_ntb_config_sspad_bar_clear(ntb_epc); +} + +/** + * epf_ntb_epc_cleanup() - Cleanup all NTB interfaces + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * + * Wrapper to cleanup all NTB interfaces. + */ +static void epf_ntb_epc_cleanup(struct epf_ntb *ntb) +{ + enum pci_epc_interface_type type; + + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++) + epf_ntb_epc_cleanup_interface(ntb, type); +} + +/** + * epf_ntb_epc_init() - Initialize all NTB interfaces + * @ntb: NTB device that facilitates communication between HOST1 and HOST2 + * + * Wrapper to initialize all NTB interface and start the workqueue + * to check for commands from host. + */ +static int epf_ntb_epc_init(struct epf_ntb *ntb) +{ + enum pci_epc_interface_type type; + struct device *dev; + int ret; + + dev = &ntb->epf->dev; + + for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++) { + ret = epf_ntb_epc_init_interface(ntb, type); + if (ret) { + dev_err(dev, "%s intf: Failed to initialize\n", + pci_epc_interface_string(type)); + goto err_init_type; + } + } + + return 0; + +err_init_type: + epf_ntb_epc_cleanup_interface(ntb, type - 1); + + return ret; +} + +/** + * epf_ntb_bind() - Invoked when a EPC is bound to NTB EPF device + * @epf: NTB endpoint function device + * + * This is invoked when a primary interface or secondary interface is + * bound to EPC device. This function will complete only when EPC is bound + * to both the interfaces. This initializes both the endpoint controllers + * associated with NTB function device. + */ +static int epf_ntb_bind(struct pci_epf *epf) +{ + struct epf_ntb *ntb = epf_get_drvdata(epf); + struct device *dev = &epf->dev; + int ret; + + if (!epf->epc) { + dev_dbg(dev, "PRIMARY EPC interface not yet bound\n"); + return 0; + } + + if (!epf->sec_epc) { + dev_dbg(dev, "SECONDARY EPC interface not yet bound\n"); + return 0; + } + + ret = epf_ntb_epc_create(ntb); + if (ret) { + dev_err(dev, "Failed to create NTB EPC\n"); + return ret; + } + + ret = epf_ntb_init_epc_bar(ntb); + if (ret) { + dev_err(dev, "Failed to create NTB EPC\n"); + goto err_bar_init; + } + + ret = epf_ntb_config_spad_bar_alloc_interface(ntb); + if (ret) { + dev_err(dev, "Failed to allocate BAR memory\n"); + goto err_bar_alloc; + } + + ret = epf_ntb_epc_init(ntb); + if (ret) { + dev_err(dev, "Failed to initialize EPC\n"); + goto err_bar_alloc; + } + + epf_set_drvdata(epf, ntb); + + return 0; + +err_bar_alloc: + epf_ntb_config_spad_bar_free(ntb); + +err_bar_init: + epf_ntb_epc_destroy(ntb); + + return ret; +} + +/** + * epf_ntb_unbind() - Cleanup the initialization from epf_ntb_bind() + * @epf: NTB endpoint function device + * + * Cleanup the initialization from epf_ntb_bind() + */ +static void epf_ntb_unbind(struct pci_epf *epf) +{ + struct epf_ntb *ntb = epf_get_drvdata(epf); + + epf_ntb_epc_cleanup(ntb); + epf_ntb_config_spad_bar_free(ntb); + epf_ntb_epc_destroy(ntb); +} + +#define EPF_NTB_R(_name) \ +static ssize_t epf_ntb_##_name##_show(struct config_item *item, \ + char *page) \ +{ \ + struct config_group *group = to_config_group(item); \ + struct epf_ntb *ntb = to_epf_ntb(group); \ + \ + return sprintf(page, "%d\n", ntb->_name); \ +} + +#define EPF_NTB_W(_name) \ +static ssize_t epf_ntb_##_name##_store(struct config_item *item, \ + const char *page, size_t len) \ +{ \ + struct config_group *group = to_config_group(item); \ + struct epf_ntb *ntb = to_epf_ntb(group); \ + u32 val; \ + int ret; \ + \ + ret = kstrtou32(page, 0, &val); \ + if (ret) \ + return ret; \ + \ + ntb->_name = val; \ + \ + return len; \ +} + +#define EPF_NTB_MW_R(_name) \ +static ssize_t epf_ntb_##_name##_show(struct config_item *item, \ + char *page) \ +{ \ + struct config_group *group = to_config_group(item); \ + struct epf_ntb *ntb = to_epf_ntb(group); \ + int win_no; \ + \ + sscanf(#_name, "mw%d", &win_no); \ + \ + return sprintf(page, "%lld\n", ntb->mws_size[win_no - 1]); \ +} + +#define EPF_NTB_MW_W(_name) \ +static ssize_t epf_ntb_##_name##_store(struct config_item *item, \ + const char *page, size_t len) \ +{ \ + struct config_group *group = to_config_group(item); \ + struct epf_ntb *ntb = to_epf_ntb(group); \ + struct device *dev = &ntb->epf->dev; \ + int win_no; \ + u64 val; \ + int ret; \ + \ + ret = kstrtou64(page, 0, &val); \ + if (ret) \ + return ret; \ + \ + if (sscanf(#_name, "mw%d", &win_no) != 1) \ + return -EINVAL; \ + \ + if (ntb->num_mws < win_no) { \ + dev_err(dev, "Invalid num_nws: %d value\n", ntb->num_mws); \ + return -EINVAL; \ + } \ + \ + ntb->mws_size[win_no - 1] = val; \ + \ + return len; \ +} + +static ssize_t epf_ntb_num_mws_store(struct config_item *item, + const char *page, size_t len) +{ + struct config_group *group = to_config_group(item); + struct epf_ntb *ntb = to_epf_ntb(group); + u32 val; + int ret; + + ret = kstrtou32(page, 0, &val); + if (ret) + return ret; + + if (val > MAX_MW) + return -EINVAL; + + ntb->num_mws = val; + + return len; +} + +EPF_NTB_R(spad_count) +EPF_NTB_W(spad_count) +EPF_NTB_R(db_count) +EPF_NTB_W(db_count) +EPF_NTB_R(num_mws) +EPF_NTB_MW_R(mw1) +EPF_NTB_MW_W(mw1) +EPF_NTB_MW_R(mw2) +EPF_NTB_MW_W(mw2) +EPF_NTB_MW_R(mw3) +EPF_NTB_MW_W(mw3) +EPF_NTB_MW_R(mw4) +EPF_NTB_MW_W(mw4) + +CONFIGFS_ATTR(epf_ntb_, spad_count); +CONFIGFS_ATTR(epf_ntb_, db_count); +CONFIGFS_ATTR(epf_ntb_, num_mws); +CONFIGFS_ATTR(epf_ntb_, mw1); +CONFIGFS_ATTR(epf_ntb_, mw2); +CONFIGFS_ATTR(epf_ntb_, mw3); +CONFIGFS_ATTR(epf_ntb_, mw4); + +static struct configfs_attribute *epf_ntb_attrs[] = { + &epf_ntb_attr_spad_count, + &epf_ntb_attr_db_count, + &epf_ntb_attr_num_mws, + &epf_ntb_attr_mw1, + &epf_ntb_attr_mw2, + &epf_ntb_attr_mw3, + &epf_ntb_attr_mw4, + NULL, +}; + +static const struct config_item_type ntb_group_type = { + .ct_attrs = epf_ntb_attrs, + .ct_owner = THIS_MODULE, +}; + +/** + * epf_ntb_add_cfs() - Add configfs directory specific to NTB + * @epf: NTB endpoint function device + * + * Add configfs directory specific to NTB. This directory will hold + * NTB specific properties like db_count, spad_count, num_mws etc., + */ +static struct config_group *epf_ntb_add_cfs(struct pci_epf *epf, + struct config_group *group) +{ + struct epf_ntb *ntb = epf_get_drvdata(epf); + struct config_group *ntb_group = &ntb->group; + struct device *dev = &epf->dev; + + config_group_init_type_name(ntb_group, dev_name(dev), &ntb_group_type); + + return ntb_group; +} + +/** + * epf_ntb_probe() - Probe NTB function driver + * @epf: NTB endpoint function device + * + * Probe NTB function driver when endpoint function bus detects a NTB + * endpoint function. + */ +static int epf_ntb_probe(struct pci_epf *epf) +{ + struct epf_ntb *ntb; + struct device *dev; + + dev = &epf->dev; + + ntb = devm_kzalloc(dev, sizeof(*ntb), GFP_KERNEL); + if (!ntb) + return -ENOMEM; + + epf->header = &epf_ntb_header; + ntb->epf = epf; + epf_set_drvdata(epf, ntb); + + return 0; +} + +static struct pci_epf_ops epf_ntb_ops = { + .bind = epf_ntb_bind, + .unbind = epf_ntb_unbind, + .add_cfs = epf_ntb_add_cfs, +}; + +static const struct pci_epf_device_id epf_ntb_ids[] = { + { + .name = "pci_epf_ntb", + }, + {}, +}; + +static struct pci_epf_driver epf_ntb_driver = { + .driver.name = "pci_epf_ntb", + .probe = epf_ntb_probe, + .id_table = epf_ntb_ids, + .ops = &epf_ntb_ops, + .owner = THIS_MODULE, +}; + +static int __init epf_ntb_init(void) +{ + int ret; + + kpcintb_workqueue = alloc_workqueue("kpcintb", WQ_MEM_RECLAIM | + WQ_HIGHPRI, 0); + ret = pci_epf_register_driver(&epf_ntb_driver); + if (ret) { + pr_err("Failed to register pci epf ntb driver --> %d\n", ret); + return ret; + } + + return 0; +} +module_init(epf_ntb_init); + +static void __exit epf_ntb_exit(void) +{ + pci_epf_unregister_driver(&epf_ntb_driver); +} +module_exit(epf_ntb_exit); + +MODULE_DESCRIPTION("PCI EPF NTB DRIVER"); +MODULE_AUTHOR("Kishon Vijay Abraham I "); +MODULE_LICENSE("GPL v2"); From patchwork Wed Sep 30 15:35:15 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 1374470 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=vvCD3qOC; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4C1gPf2L2tz9sSG for ; Thu, 1 Oct 2020 01:37:58 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730104AbgI3Ph4 (ORCPT ); Wed, 30 Sep 2020 11:37:56 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:57426 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731152AbgI3Phz (ORCPT ); Wed, 30 Sep 2020 11:37:55 -0400 Received: from fllv0035.itg.ti.com ([10.64.41.0]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 08UFbiIj044188; Wed, 30 Sep 2020 10:37:44 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1601480264; bh=mBDRi2H+5RmDLfb3VgWO2CxtWeit10rVqDT4xYAQnwU=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=vvCD3qOCAqhOqF9NqnAUeyFlTJJJfHzenPXGZS7tZeglSgSq0qSLipr1qGXre8KIe vs/UsRhuP8EsKkD1H25ZHK55yuAMeFm/atvOCSFU+2SwscB932OmQbhyKOOhzlWieq C24lrad8CUTFRFtCBZwuRL4nLsiOnSheqQqfJAwM= Received: from DFLE101.ent.ti.com (dfle101.ent.ti.com [10.64.6.22]) by fllv0035.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFbisO032862; Wed, 30 Sep 2020 10:37:44 -0500 Received: from DFLE101.ent.ti.com (10.64.6.22) by DFLE101.ent.ti.com (10.64.6.22) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 30 Sep 2020 10:37:44 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DFLE101.ent.ti.com (10.64.6.22) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 30 Sep 2020 10:37:44 -0500 Received: from a0393678-ssd.dal.design.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZLZd033254; Wed, 30 Sep 2020 10:37:39 -0500 From: Kishon Vijay Abraham I To: Bjorn Helgaas , Jonathan Corbet , Kishon Vijay Abraham I , Lorenzo Pieralisi , Arnd Bergmann , Jon Mason , Dave Jiang , Allen Hubbe , Tom Joseph , Rob Herring CC: Greg Kroah-Hartman , , , , Subject: [PATCH v7 14/18] PCI: Add TI J721E device to pci ids Date: Wed, 30 Sep 2020 21:05:15 +0530 Message-ID: <20200930153519.7282-15-kishon@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200930153519.7282-1-kishon@ti.com> References: <20200930153519.7282-1-kishon@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Add TI J721E device to the pci id database. Since this device has a configurable PCIe endpoint, it could be used with different drivers. Signed-off-by: Kishon Vijay Abraham I --- drivers/misc/pci_endpoint_test.c | 1 - include/linux/pci_ids.h | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index e060796f9caa..03fade34aeac 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -68,7 +68,6 @@ #define PCI_ENDPOINT_TEST_FLAGS 0x2c #define FLAG_USE_DMA BIT(0) -#define PCI_DEVICE_ID_TI_J721E 0xb00d #define PCI_DEVICE_ID_TI_AM654 0xb00c #define is_am654_pci_dev(pdev) \ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 1ab1e24bcbce..6ddeb64049b5 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -880,6 +880,7 @@ #define PCI_DEVICE_ID_TI_X620 0xac8d #define PCI_DEVICE_ID_TI_X420 0xac8e #define PCI_DEVICE_ID_TI_XX20_FM 0xac8f +#define PCI_DEVICE_ID_TI_J721E 0xb00d #define PCI_DEVICE_ID_TI_DRA74x 0xb500 #define PCI_DEVICE_ID_TI_DRA72x 0xb501 From patchwork Wed Sep 30 15:35:16 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 1374473 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=ngL4VCLF; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4C1gQM0qRMz9sT6 for ; Thu, 1 Oct 2020 01:38:35 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1725468AbgI3Pi0 (ORCPT ); Wed, 30 Sep 2020 11:38:26 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:57574 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726572AbgI3Pi0 (ORCPT ); Wed, 30 Sep 2020 11:38:26 -0400 Received: from lelv0265.itg.ti.com ([10.180.67.224]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 08UFc7pb044290; Wed, 30 Sep 2020 10:38:07 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1601480287; bh=hmVR3xrnh+/kuWPY8TS0BPvQtAF1cKWgQuSpucOU0Zs=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=ngL4VCLFAebDbJ/VQZ0cqY/EBRVjKkZP0dqRFCJ2t9rIHe4MKk4OB3FwtBMxdM7X5 CLhsUIjQjVPWRKaGmQGxwUWGJj6JrErGxqDkQkeIfN3mv2RPuIYYAOaOi6VbN6Yabq m9/z9ciCTurwY6iaUYymDlNvgQKE9RssDMr30cQM= Received: from DFLE103.ent.ti.com (dfle103.ent.ti.com [10.64.6.24]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 08UFc6fr045240 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 30 Sep 2020 10:38:06 -0500 Received: from DFLE109.ent.ti.com (10.64.6.30) by DFLE103.ent.ti.com (10.64.6.24) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 30 Sep 2020 10:38:05 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DFLE109.ent.ti.com (10.64.6.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 30 Sep 2020 10:38:05 -0500 Received: from a0393678-ssd.dal.design.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZLZe033254; Wed, 30 Sep 2020 10:37:44 -0500 From: Kishon Vijay Abraham I To: Bjorn Helgaas , Jonathan Corbet , Kishon Vijay Abraham I , Lorenzo Pieralisi , Arnd Bergmann , Jon Mason , Dave Jiang , Allen Hubbe , Tom Joseph , Rob Herring CC: Greg Kroah-Hartman , , , , Subject: [PATCH v7 15/18] NTB: Add support for EPF PCI-Express Non-Transparent Bridge Date: Wed, 30 Sep 2020 21:05:16 +0530 Message-ID: <20200930153519.7282-16-kishon@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200930153519.7282-1-kishon@ti.com> References: <20200930153519.7282-1-kishon@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Add support for EPF PCI-Express Non-Transparent Bridge (NTB) device. This driver is platform independent and could be used by any platform which have multiple PCIe endpoint instances configured using the pci-epf-ntb driver. The driver connnects to the standard NTB sub-system interface. The EPF NTB device has configurable number of memory windows (Max 4), configurable number of doorbell (Max 32), and configurable number of scratch-pad registers. Signed-off-by: Kishon Vijay Abraham I --- drivers/ntb/hw/Kconfig | 1 + drivers/ntb/hw/Makefile | 1 + drivers/ntb/hw/epf/Kconfig | 6 + drivers/ntb/hw/epf/Makefile | 1 + drivers/ntb/hw/epf/ntb_hw_epf.c | 755 ++++++++++++++++++++++++++++++++ 5 files changed, 764 insertions(+) create mode 100644 drivers/ntb/hw/epf/Kconfig create mode 100644 drivers/ntb/hw/epf/Makefile create mode 100644 drivers/ntb/hw/epf/ntb_hw_epf.c diff --git a/drivers/ntb/hw/Kconfig b/drivers/ntb/hw/Kconfig index e77c587060ff..c325be526b80 100644 --- a/drivers/ntb/hw/Kconfig +++ b/drivers/ntb/hw/Kconfig @@ -2,4 +2,5 @@ source "drivers/ntb/hw/amd/Kconfig" source "drivers/ntb/hw/idt/Kconfig" source "drivers/ntb/hw/intel/Kconfig" +source "drivers/ntb/hw/epf/Kconfig" source "drivers/ntb/hw/mscc/Kconfig" diff --git a/drivers/ntb/hw/Makefile b/drivers/ntb/hw/Makefile index 4714d6238845..223ca592b5f9 100644 --- a/drivers/ntb/hw/Makefile +++ b/drivers/ntb/hw/Makefile @@ -2,4 +2,5 @@ obj-$(CONFIG_NTB_AMD) += amd/ obj-$(CONFIG_NTB_IDT) += idt/ obj-$(CONFIG_NTB_INTEL) += intel/ +obj-$(CONFIG_NTB_EPF) += epf/ obj-$(CONFIG_NTB_SWITCHTEC) += mscc/ diff --git a/drivers/ntb/hw/epf/Kconfig b/drivers/ntb/hw/epf/Kconfig new file mode 100644 index 000000000000..6197d1aab344 --- /dev/null +++ b/drivers/ntb/hw/epf/Kconfig @@ -0,0 +1,6 @@ +config NTB_EPF + tristate "Generic EPF Non-Transparent Bridge support" + depends on m + help + This driver supports EPF NTB on configurable endpoint. + If unsure, say N. diff --git a/drivers/ntb/hw/epf/Makefile b/drivers/ntb/hw/epf/Makefile new file mode 100644 index 000000000000..2f560a422bc6 --- /dev/null +++ b/drivers/ntb/hw/epf/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_NTB_EPF) += ntb_hw_epf.o diff --git a/drivers/ntb/hw/epf/ntb_hw_epf.c b/drivers/ntb/hw/epf/ntb_hw_epf.c new file mode 100644 index 000000000000..0a144987851a --- /dev/null +++ b/drivers/ntb/hw/epf/ntb_hw_epf.c @@ -0,0 +1,755 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * Host side endpoint driver to implement Non-Transparent Bridge functionality + * + * Copyright (C) 2020 Texas Instruments + * Author: Kishon Vijay Abraham I + */ + +#include +#include +#include +#include +#include + +#define NTB_EPF_COMMAND 0x0 +#define CMD_CONFIGURE_DOORBELL 1 +#define CMD_TEARDOWN_DOORBELL 2 +#define CMD_CONFIGURE_MW 3 +#define CMD_TEARDOWN_MW 4 +#define CMD_LINK_UP 5 +#define CMD_LINK_DOWN 6 + +#define NTB_EPF_ARGUMENT 0x4 +#define MSIX_ENABLE BIT(16) + +#define NTB_EPF_CMD_STATUS 0x8 +#define COMMAND_STATUS_OK 1 +#define COMMAND_STATUS_ERROR 2 + +#define NTB_EPF_LINK_STATUS 0x0A +#define LINK_STATUS_UP BIT(0) + +#define NTB_EPF_TOPOLOGY 0x0C +#define NTB_EPF_LOWER_ADDR 0x10 +#define NTB_EPF_UPPER_ADDR 0x14 +#define NTB_EPF_LOWER_SIZE 0x18 +#define NTB_EPF_UPPER_SIZE 0x1C +#define NTB_EPF_MW_COUNT 0x20 +#define NTB_EPF_MW1_OFFSET 0x24 +#define NTB_EPF_SPAD_OFFSET 0x28 +#define NTB_EPF_SPAD_COUNT 0x2C +#define NTB_EPF_DB_ENTRY_SIZE 0x30 +#define NTB_EPF_DB_DATA(n) (0x34 + (n) * 4) +#define NTB_EPF_DB_OFFSET(n) (0xB4 + (n) * 4) + +#define NTB_EPF_MIN_DB_COUNT 3 +#define NTB_EPF_MAX_DB_COUNT 31 +#define NTB_EPF_MW_OFFSET 2 + +#define NTB_EPF_COMMAND_TIMEOUT 1000 /* 1 Sec */ + +enum pci_barno { + BAR_0, + BAR_1, + BAR_2, + BAR_3, + BAR_4, + BAR_5, +}; + +struct ntb_epf_dev { + struct ntb_dev ntb; + struct device *dev; + /* Mutex to protect providing commands to NTB EPF */ + struct mutex cmd_lock; + + enum pci_barno ctrl_reg_bar; + enum pci_barno peer_spad_reg_bar; + enum pci_barno db_reg_bar; + + unsigned int mw_count; + unsigned int spad_count; + unsigned int db_count; + + void __iomem *ctrl_reg; + void __iomem *db_reg; + void __iomem *peer_spad_reg; + + unsigned int self_spad; + unsigned int peer_spad; + + int db_val; + u64 db_valid_mask; +}; + +#define ntb_ndev(__ntb) container_of(__ntb, struct ntb_epf_dev, ntb) + +struct ntb_epf_data { + /* BAR that contains both control region and self spad region */ + enum pci_barno ctrl_reg_bar; + /* BAR that contains peer spad region */ + enum pci_barno peer_spad_reg_bar; + /* BAR that contains Doorbell region and Memory window '1' */ + enum pci_barno db_reg_bar; +}; + +static int ntb_epf_send_command(struct ntb_epf_dev *ndev, u32 command, + u32 argument) +{ + ktime_t timeout; + bool timedout; + int ret = 0; + u32 status; + + mutex_lock(&ndev->cmd_lock); + writel(argument, ndev->ctrl_reg + NTB_EPF_ARGUMENT); + writel(command, ndev->ctrl_reg + NTB_EPF_COMMAND); + + timeout = ktime_add_ms(ktime_get(), NTB_EPF_COMMAND_TIMEOUT); + while (1) { + timedout = ktime_after(ktime_get(), timeout); + status = readw(ndev->ctrl_reg + NTB_EPF_CMD_STATUS); + + if (status == COMMAND_STATUS_ERROR) { + ret = -EINVAL; + break; + } + + if (status == COMMAND_STATUS_OK) + break; + + if (WARN_ON(timedout)) { + ret = -ETIMEDOUT; + break; + } + + usleep_range(5, 10); + } + + writew(0, ndev->ctrl_reg + NTB_EPF_CMD_STATUS); + mutex_unlock(&ndev->cmd_lock); + + return ret; +} + +static int ntb_epf_mw_to_bar(struct ntb_epf_dev *ndev, int idx) +{ + struct device *dev = ndev->dev; + + if (idx < 0 || idx > ndev->mw_count) { + dev_err(dev, "Unsupported Memory Window index %d\n", idx); + return -EINVAL; + } + + return idx + 2; +} + +static int ntb_epf_mw_count(struct ntb_dev *ntb, int pidx) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + struct device *dev = ndev->dev; + + if (pidx != NTB_DEF_PEER_IDX) { + dev_err(dev, "Unsupported Peer ID %d\n", pidx); + return -EINVAL; + } + + return ndev->mw_count; +} + +static int ntb_epf_mw_get_align(struct ntb_dev *ntb, int pidx, int idx, + resource_size_t *addr_align, + resource_size_t *size_align, + resource_size_t *size_max) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + struct device *dev = ndev->dev; + int bar; + + if (pidx != NTB_DEF_PEER_IDX) { + dev_err(dev, "Unsupported Peer ID %d\n", pidx); + return -EINVAL; + } + + bar = ntb_epf_mw_to_bar(ndev, idx); + if (bar < 0) + return bar; + + if (addr_align) + *addr_align = SZ_4K; + + if (size_align) + *size_align = 1; + + if (size_max) + *size_max = pci_resource_len(ndev->ntb.pdev, bar); + + return 0; +} + +static u64 ntb_epf_link_is_up(struct ntb_dev *ntb, + enum ntb_speed *speed, + enum ntb_width *width) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + u32 status; + + status = readw(ndev->ctrl_reg + NTB_EPF_LINK_STATUS); + + return status & LINK_STATUS_UP; +} + +static u32 ntb_epf_spad_read(struct ntb_dev *ntb, int idx) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + struct device *dev = ndev->dev; + u32 offset; + + if (idx < 0 || idx >= ndev->spad_count) { + dev_err(dev, "READ: Invalid ScratchPad Index %d\n", idx); + return 0; + } + + offset = readl(ndev->ctrl_reg + NTB_EPF_SPAD_OFFSET); + offset += (idx << 2); + + return readl(ndev->ctrl_reg + offset); +} + +static int ntb_epf_spad_write(struct ntb_dev *ntb, + int idx, u32 val) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + struct device *dev = ndev->dev; + u32 offset; + + if (idx < 0 || idx >= ndev->spad_count) { + dev_err(dev, "WRITE: Invalid ScratchPad Index %d\n", idx); + return -EINVAL; + } + + offset = readl(ndev->ctrl_reg + NTB_EPF_SPAD_OFFSET); + offset += (idx << 2); + writel(val, ndev->ctrl_reg + offset); + + return 0; +} + +static u32 ntb_epf_peer_spad_read(struct ntb_dev *ntb, int pidx, int idx) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + struct device *dev = ndev->dev; + u32 offset; + + if (pidx != NTB_DEF_PEER_IDX) { + dev_err(dev, "Unsupported Peer ID %d\n", pidx); + return -EINVAL; + } + + if (idx < 0 || idx >= ndev->spad_count) { + dev_err(dev, "WRITE: Invalid Peer ScratchPad Index %d\n", idx); + return -EINVAL; + } + + offset = (idx << 2); + return readl(ndev->peer_spad_reg + offset); +} + +static int ntb_epf_peer_spad_write(struct ntb_dev *ntb, int pidx, + int idx, u32 val) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + struct device *dev = ndev->dev; + u32 offset; + + if (pidx != NTB_DEF_PEER_IDX) { + dev_err(dev, "Unsupported Peer ID %d\n", pidx); + return -EINVAL; + } + + if (idx < 0 || idx >= ndev->spad_count) { + dev_err(dev, "WRITE: Invalid Peer ScratchPad Index %d\n", idx); + return -EINVAL; + } + + offset = (idx << 2); + writel(val, ndev->peer_spad_reg + offset); + + return 0; +} + +static int ntb_epf_link_enable(struct ntb_dev *ntb, + enum ntb_speed max_speed, + enum ntb_width max_width) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + struct device *dev = ndev->dev; + int ret; + + ret = ntb_epf_send_command(ndev, CMD_LINK_UP, 0); + if (ret) { + dev_err(dev, "Fail to enable link\n"); + return ret; + } + + return 0; +} + +static int ntb_epf_link_disable(struct ntb_dev *ntb) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + struct device *dev = ndev->dev; + int ret; + + ret = ntb_epf_send_command(ndev, CMD_LINK_DOWN, 0); + if (ret) { + dev_err(dev, "Fail to disable link\n"); + return ret; + } + + return 0; +} + +static irqreturn_t ntb_epf_vec_isr(int irq, void *dev) +{ + struct ntb_epf_dev *ndev = dev; + int irq_no; + + irq_no = irq - pci_irq_vector(ndev->ntb.pdev, 0); + ndev->db_val = irq_no + 1; + + if (irq_no == 0) + ntb_link_event(&ndev->ntb); + else + ntb_db_event(&ndev->ntb, irq_no); + + return IRQ_HANDLED; +} + +static int ntb_epf_init_isr(struct ntb_epf_dev *ndev, int msi_min, int msi_max) +{ + struct pci_dev *pdev = ndev->ntb.pdev; + struct device *dev = ndev->dev; + u32 argument = MSIX_ENABLE; + int irq; + int ret; + int i; + + irq = pci_alloc_irq_vectors(pdev, msi_min, msi_max, PCI_IRQ_MSIX); + if (irq < 0) { + dev_dbg(dev, "Failed to get MSIX interrupts\n"); + irq = pci_alloc_irq_vectors(pdev, msi_min, msi_max, + PCI_IRQ_MSI); + if (irq < 0) { + dev_err(dev, "Failed to get MSI interrupts\n"); + return irq; + } + argument &= ~MSIX_ENABLE; + } + + for (i = 0; i < irq; i++) { + ret = devm_request_irq(&pdev->dev, pci_irq_vector(pdev, i), + ntb_epf_vec_isr, 0, "ntb_epf", ndev); + if (ret) { + dev_err(dev, "Failed to request irq\n"); + goto err_request_irq; + } + } + + ndev->db_count = irq - 1; + + ret = ntb_epf_send_command(ndev, CMD_CONFIGURE_DOORBELL, + argument | irq); + if (ret) { + dev_err(dev, "Failed to configure doorbell\n"); + goto err_configure_db; + } + + return 0; + +err_configure_db: + for (i = 0; i < ndev->db_count + 1; i++) + devm_free_irq(dev, pci_irq_vector(pdev, i), ndev); + +err_request_irq: + pci_free_irq_vectors(pdev); + + return ret; +} + +static int ntb_epf_peer_mw_count(struct ntb_dev *ntb) +{ + return ntb_ndev(ntb)->mw_count; +} + +static int ntb_epf_spad_count(struct ntb_dev *ntb) +{ + return ntb_ndev(ntb)->spad_count; +} + +static u64 ntb_epf_db_valid_mask(struct ntb_dev *ntb) +{ + return ntb_ndev(ntb)->db_valid_mask; +} + +static int ntb_epf_db_set_mask(struct ntb_dev *ntb, u64 db_bits) +{ + return 0; +} + +static int ntb_epf_mw_set_trans(struct ntb_dev *ntb, int pidx, int idx, + dma_addr_t addr, resource_size_t size) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + struct device *dev = ndev->dev; + resource_size_t mw_size; + int bar; + + if (pidx != NTB_DEF_PEER_IDX) { + dev_err(dev, "Unsupported Peer ID %d\n", pidx); + return -EINVAL; + } + + bar = idx + NTB_EPF_MW_OFFSET; + + mw_size = pci_resource_len(ntb->pdev, bar); + + if (size > mw_size) { + dev_err(dev, "Size:%pa is greater than the MW size %pa\n", + &size, &mw_size); + return -EINVAL; + } + + writel(lower_32_bits(addr), ndev->ctrl_reg + NTB_EPF_LOWER_ADDR); + writel(upper_32_bits(addr), ndev->ctrl_reg + NTB_EPF_UPPER_ADDR); + writel(lower_32_bits(size), ndev->ctrl_reg + NTB_EPF_LOWER_SIZE); + writel(upper_32_bits(size), ndev->ctrl_reg + NTB_EPF_UPPER_SIZE); + ntb_epf_send_command(ndev, CMD_CONFIGURE_MW, idx); + + return 0; +} + +static int ntb_epf_mw_clear_trans(struct ntb_dev *ntb, int pidx, int idx) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + struct device *dev = ndev->dev; + int ret = 0; + + ntb_epf_send_command(ndev, CMD_TEARDOWN_MW, idx); + if (ret) + dev_err(dev, "Failed to teardown memory window\n"); + + return ret; +} + +static int ntb_epf_peer_mw_get_addr(struct ntb_dev *ntb, int idx, + phys_addr_t *base, resource_size_t *size) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + u32 offset = 0; + int bar; + + if (idx == 0) + offset = readl(ndev->ctrl_reg + NTB_EPF_MW1_OFFSET); + + bar = idx + NTB_EPF_MW_OFFSET; + + if (base) + *base = pci_resource_start(ndev->ntb.pdev, bar) + offset; + + if (size) + *size = pci_resource_len(ndev->ntb.pdev, bar) - offset; + + return 0; +} + +static int ntb_epf_peer_db_set(struct ntb_dev *ntb, u64 db_bits) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + u32 interrupt_num = ffs(db_bits) + 1; + struct device *dev = ndev->dev; + u32 db_entry_size; + u32 db_offset; + u32 db_data; + + if (interrupt_num > ndev->db_count) { + dev_err(dev, "DB interrupt %d greater than Max Supported %d\n", + interrupt_num, ndev->db_count); + return -EINVAL; + } + + db_entry_size = readl(ndev->ctrl_reg + NTB_EPF_DB_ENTRY_SIZE); + + db_data = readl(ndev->ctrl_reg + NTB_EPF_DB_DATA(interrupt_num)); + db_offset = readl(ndev->ctrl_reg + NTB_EPF_DB_OFFSET(interrupt_num)); + writel(db_data, ndev->db_reg + (db_entry_size * interrupt_num) + + db_offset); + + return 0; +} + +static u64 ntb_epf_db_read(struct ntb_dev *ntb) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + + return ndev->db_val; +} + +static int ntb_epf_db_clear_mask(struct ntb_dev *ntb, u64 db_bits) +{ + return 0; +} + +static int ntb_epf_db_clear(struct ntb_dev *ntb, u64 db_bits) +{ + struct ntb_epf_dev *ndev = ntb_ndev(ntb); + + ndev->db_val = 0; + + return 0; +} + +static const struct ntb_dev_ops ntb_epf_ops = { + .mw_count = ntb_epf_mw_count, + .spad_count = ntb_epf_spad_count, + .peer_mw_count = ntb_epf_peer_mw_count, + .db_valid_mask = ntb_epf_db_valid_mask, + .db_set_mask = ntb_epf_db_set_mask, + .mw_set_trans = ntb_epf_mw_set_trans, + .mw_clear_trans = ntb_epf_mw_clear_trans, + .peer_mw_get_addr = ntb_epf_peer_mw_get_addr, + .link_enable = ntb_epf_link_enable, + .spad_read = ntb_epf_spad_read, + .spad_write = ntb_epf_spad_write, + .peer_spad_read = ntb_epf_peer_spad_read, + .peer_spad_write = ntb_epf_peer_spad_write, + .peer_db_set = ntb_epf_peer_db_set, + .db_read = ntb_epf_db_read, + .mw_get_align = ntb_epf_mw_get_align, + .link_is_up = ntb_epf_link_is_up, + .db_clear_mask = ntb_epf_db_clear_mask, + .db_clear = ntb_epf_db_clear, + .link_disable = ntb_epf_link_disable, +}; + +static inline void ntb_epf_init_struct(struct ntb_epf_dev *ndev, + struct pci_dev *pdev) +{ + ndev->ntb.pdev = pdev; + ndev->ntb.topo = NTB_TOPO_NONE; + ndev->ntb.ops = &ntb_epf_ops; +} + +static int ntb_epf_init_dev(struct ntb_epf_dev *ndev) +{ + struct device *dev = ndev->dev; + int ret; + + /* One Link interrupt and rest doorbell interrupt */ + ret = ntb_epf_init_isr(ndev, NTB_EPF_MIN_DB_COUNT + 1, + NTB_EPF_MAX_DB_COUNT + 1); + if (ret) { + dev_err(dev, "Failed to init ISR\n"); + return ret; + } + + ndev->db_valid_mask = BIT_ULL(ndev->db_count) - 1; + ndev->mw_count = readl(ndev->ctrl_reg + NTB_EPF_MW_COUNT); + ndev->spad_count = readl(ndev->ctrl_reg + NTB_EPF_SPAD_COUNT); + + return 0; +} + +static int ntb_epf_init_pci(struct ntb_epf_dev *ndev, + struct pci_dev *pdev) +{ + struct device *dev = ndev->dev; + int ret; + + pci_set_drvdata(pdev, ndev); + + ret = pci_enable_device(pdev); + if (ret) { + dev_err(dev, "Cannot enable PCI device\n"); + goto err_pci_enable; + } + + ret = pci_request_regions(pdev, "ntb"); + if (ret) { + dev_err(dev, "Cannot obtain PCI resources\n"); + goto err_pci_regions; + } + + pci_set_master(pdev); + + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)); + if (ret) { + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)); + if (ret) { + dev_err(dev, "Cannot set DMA mask\n"); + goto err_dma_mask; + } + dev_warn(&pdev->dev, "Cannot DMA highmem\n"); + } + + ndev->ctrl_reg = pci_iomap(pdev, 0, 0); + if (!ndev->ctrl_reg) { + ret = -EIO; + goto err_dma_mask; + } + + ndev->peer_spad_reg = pci_iomap(pdev, 1, 0); + if (!ndev->peer_spad_reg) { + ret = -EIO; + goto err_dma_mask; + } + + ndev->db_reg = pci_iomap(pdev, 2, 0); + if (!ndev->db_reg) { + ret = -EIO; + goto err_dma_mask; + } + + return 0; + +err_dma_mask: + pci_clear_master(pdev); + +err_pci_regions: + pci_disable_device(pdev); + +err_pci_enable: + pci_set_drvdata(pdev, NULL); + + return ret; +} + +static void ntb_epf_deinit_pci(struct ntb_epf_dev *ndev) +{ + struct pci_dev *pdev = ndev->ntb.pdev; + + pci_iounmap(pdev, ndev->ctrl_reg); + pci_iounmap(pdev, ndev->peer_spad_reg); + pci_iounmap(pdev, ndev->db_reg); + + pci_clear_master(pdev); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); +} + +static void ntb_epf_cleanup_isr(struct ntb_epf_dev *ndev) +{ + struct pci_dev *pdev = ndev->ntb.pdev; + struct device *dev = &pdev->dev; + int i; + + ntb_epf_send_command(ndev, CMD_TEARDOWN_DOORBELL, ndev->db_count + 1); + + for (i = 0; i < ndev->db_count + 1; i++) + devm_free_irq(dev, pci_irq_vector(pdev, i), ndev); + pci_free_irq_vectors(pdev); +} + +static int ntb_epf_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + enum pci_barno peer_spad_reg_bar = BAR_1; + enum pci_barno ctrl_reg_bar = BAR_0; + enum pci_barno db_reg_bar = BAR_2; + struct device *dev = &pdev->dev; + struct ntb_epf_data *data; + struct ntb_epf_dev *ndev; + int ret; + + if (pci_is_bridge(pdev)) + return -ENODEV; + + ndev = devm_kzalloc(dev, sizeof(*ndev), GFP_KERNEL); + if (!ndev) + return -ENOMEM; + + data = (struct ntb_epf_data *)id->driver_data; + if (data) { + if (data->peer_spad_reg_bar) + peer_spad_reg_bar = data->peer_spad_reg_bar; + if (data->ctrl_reg_bar) + ctrl_reg_bar = data->ctrl_reg_bar; + if (data->db_reg_bar) + db_reg_bar = data->db_reg_bar; + } + + ndev->peer_spad_reg_bar = peer_spad_reg_bar; + ndev->ctrl_reg_bar = ctrl_reg_bar; + ndev->db_reg_bar = db_reg_bar; + ndev->dev = dev; + + ntb_epf_init_struct(ndev, pdev); + mutex_init(&ndev->cmd_lock); + + ret = ntb_epf_init_pci(ndev, pdev); + if (ret) { + dev_err(dev, "Failed to init PCI\n"); + return ret; + } + + ret = ntb_epf_init_dev(ndev); + if (ret) { + dev_err(dev, "Failed to init device\n"); + goto err_init_dev; + } + + ret = ntb_register_device(&ndev->ntb); + if (ret) { + dev_err(dev, "Failed to register NTB device\n"); + goto err_register_dev; + } + + return 0; + +err_register_dev: + ntb_epf_cleanup_isr(ndev); + +err_init_dev: + ntb_epf_deinit_pci(ndev); + + return ret; +} + +static void ntb_epf_pci_remove(struct pci_dev *pdev) +{ + struct ntb_epf_dev *ndev = pci_get_drvdata(pdev); + + ntb_unregister_device(&ndev->ntb); + ntb_epf_cleanup_isr(ndev); + ntb_epf_deinit_pci(ndev); + kfree(ndev); +} + +static const struct ntb_epf_data j721e_data = { + .ctrl_reg_bar = BAR_0, + .peer_spad_reg_bar = BAR_1, + .db_reg_bar = BAR_2, +}; + +static const struct pci_device_id ntb_epf_pci_tbl[] = { + { + PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_J721E), + .class = PCI_CLASS_MEMORY_RAM << 8, .class_mask = 0xffff00, + .driver_data = (kernel_ulong_t)&j721e_data, + }, + { }, +}; + +static struct pci_driver ntb_epf_pci_driver = { + .name = KBUILD_MODNAME, + .id_table = ntb_epf_pci_tbl, + .probe = ntb_epf_pci_probe, + .remove = ntb_epf_pci_remove, +}; +module_pci_driver(ntb_epf_pci_driver); + +MODULE_DESCRIPTION("PCI ENDPOINT NTB HOST DRIVER"); +MODULE_AUTHOR("Kishon Vijay Abraham I "); +MODULE_LICENSE("GPL v2"); From patchwork Wed Sep 30 15:35:17 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 1374471 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=v6H4Mqgp; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4C1gQB07pfz9sSn for ; Thu, 1 Oct 2020 01:38:26 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728006AbgI3PiZ (ORCPT ); Wed, 30 Sep 2020 11:38:25 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:57578 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727681AbgI3PiZ (ORCPT ); Wed, 30 Sep 2020 11:38:25 -0400 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 08UFcBCJ044316; Wed, 30 Sep 2020 10:38:11 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1601480291; bh=PSR7JL4HaqO9swLj/T2R0uAkZr/feSQH9xlHyklOXq0=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=v6H4Mqgp1rcMScwogwDvuziNOsCKmWylPBQntd0350gRLEfI06U3GLIcuG6FBV0bt h/QIxsOfb0geKs/5UdbvSqSUh8vTV7FAIkIXhZk0ZaJOcy8VQ4bp7rAJfbbcDE6mgV V4Sv2PNk5yiuWO4u/RnbhL1PmoKokaGgdDc433gk= Received: from DLEE105.ent.ti.com (dlee105.ent.ti.com [157.170.170.35]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 08UFcBcj028621 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 30 Sep 2020 10:38:11 -0500 Received: from DLEE110.ent.ti.com (157.170.170.21) by DLEE105.ent.ti.com (157.170.170.35) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 30 Sep 2020 10:38:10 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DLEE110.ent.ti.com (157.170.170.21) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 30 Sep 2020 10:38:10 -0500 Received: from a0393678-ssd.dal.design.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZLZf033254; Wed, 30 Sep 2020 10:38:06 -0500 From: Kishon Vijay Abraham I To: Bjorn Helgaas , Jonathan Corbet , Kishon Vijay Abraham I , Lorenzo Pieralisi , Arnd Bergmann , Jon Mason , Dave Jiang , Allen Hubbe , Tom Joseph , Rob Herring CC: Greg Kroah-Hartman , , , , Subject: [PATCH v7 16/18] NTB: tool: Enable the NTB/PCIe link on the local or remote side of bridge Date: Wed, 30 Sep 2020 21:05:17 +0530 Message-ID: <20200930153519.7282-17-kishon@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200930153519.7282-1-kishon@ti.com> References: <20200930153519.7282-1-kishon@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Invoke ntb_link_enable() to enable the NTB/PCIe link on the local or remote side of the bridge. Signed-off-by: Kishon Vijay Abraham I --- drivers/ntb/test/ntb_tool.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ntb/test/ntb_tool.c b/drivers/ntb/test/ntb_tool.c index b7bf3f863d79..8230ced503e3 100644 --- a/drivers/ntb/test/ntb_tool.c +++ b/drivers/ntb/test/ntb_tool.c @@ -1638,6 +1638,7 @@ static int tool_probe(struct ntb_client *self, struct ntb_dev *ntb) tool_setup_dbgfs(tc); + ntb_link_enable(ntb, NTB_SPEED_AUTO, NTB_WIDTH_AUTO); return 0; err_clear_mws: From patchwork Wed Sep 30 15:35:18 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 1374472 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=TnZ3HIgw; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4C1gQL4kLVz9sSs for ; Thu, 1 Oct 2020 01:38:34 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731102AbgI3Pi2 (ORCPT ); Wed, 30 Sep 2020 11:38:28 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:57592 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726572AbgI3Pi2 (ORCPT ); Wed, 30 Sep 2020 11:38:28 -0400 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 08UFcGSF044341; Wed, 30 Sep 2020 10:38:16 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1601480296; bh=WksIlAP2St63/dYiNF+cCQGpadcOB7vBxhhFZVaW4Fw=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=TnZ3HIgwow8KS9Q5HrAlGQNvCm7wQh9cv9H4/SeLGuKgJkkLz6eAFpZLZEudbuCKO PTNVRFwR5lrPQ9QQY1+H8ONxDuiq2HWmBg3c/Er5zvMZy4hdzpGIeAM1p8K6fetndp D6//cXi1AGx5v2eNg67ifNQT86aRG8zjgc8mo7gk= Received: from DFLE104.ent.ti.com (dfle104.ent.ti.com [10.64.6.25]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 08UFcGaR028718 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 30 Sep 2020 10:38:16 -0500 Received: from DFLE114.ent.ti.com (10.64.6.35) by DFLE104.ent.ti.com (10.64.6.25) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 30 Sep 2020 10:38:15 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DFLE114.ent.ti.com (10.64.6.35) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 30 Sep 2020 10:38:16 -0500 Received: from a0393678-ssd.dal.design.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZLZg033254; Wed, 30 Sep 2020 10:38:11 -0500 From: Kishon Vijay Abraham I To: Bjorn Helgaas , Jonathan Corbet , Kishon Vijay Abraham I , Lorenzo Pieralisi , Arnd Bergmann , Jon Mason , Dave Jiang , Allen Hubbe , Tom Joseph , Rob Herring CC: Greg Kroah-Hartman , , , , Subject: [PATCH v7 17/18] Documentation: PCI: Add configfs binding documentation for pci-ntb endpoint function Date: Wed, 30 Sep 2020 21:05:18 +0530 Message-ID: <20200930153519.7282-18-kishon@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200930153519.7282-1-kishon@ti.com> References: <20200930153519.7282-1-kishon@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Add binding documentation for pci-ntb endpoint function that helps in adding and configuring pci-ntb endpoint function. Signed-off-by: Kishon Vijay Abraham I --- .../PCI/endpoint/function/binding/pci-ntb.rst | 38 +++++++++++++++++++ Documentation/PCI/endpoint/index.rst | 1 + 2 files changed, 39 insertions(+) create mode 100644 Documentation/PCI/endpoint/function/binding/pci-ntb.rst diff --git a/Documentation/PCI/endpoint/function/binding/pci-ntb.rst b/Documentation/PCI/endpoint/function/binding/pci-ntb.rst new file mode 100644 index 000000000000..40253d3d5163 --- /dev/null +++ b/Documentation/PCI/endpoint/function/binding/pci-ntb.rst @@ -0,0 +1,38 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================== +PCI NTB Endpoint Function +========================== + +1) Create a subdirectory to pci_epf_ntb directory in configfs. + +Standard EPF Configurable Fields: + +================ =========================================================== +vendorid should be 0x104c +deviceid should be 0xb00d for TI's J721E SoC +revid don't care +progif_code don't care +subclass_code should be 0x00 +baseclass_code should be 0x5 +cache_line_size don't care +subsys_vendor_id don't care +subsys_id don't care +interrupt_pin don't care +msi_interrupts don't care +msix_interrupts don't care +================ =========================================================== + +2) Create a subdirectory to directory created in 1 + +NTB EPF specific configurable fields: + +================ =========================================================== +db_count Number of doorbells; default = 4 +mw1 size of memory window1 +mw2 size of memory window2 +mw3 size of memory window3 +mw4 size of memory window4 +num_mws Number of memory windows; max = 4 +spad_count Number of scratchpad registers; default = 64 +================ =========================================================== diff --git a/Documentation/PCI/endpoint/index.rst b/Documentation/PCI/endpoint/index.rst index ef6861128506..9cb6e5f3c4d5 100644 --- a/Documentation/PCI/endpoint/index.rst +++ b/Documentation/PCI/endpoint/index.rst @@ -14,3 +14,4 @@ PCI Endpoint Framework pci-ntb-function function/binding/pci-test + function/binding/pci-ntb From patchwork Wed Sep 30 15:35:19 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 1374474 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=ZWHVVQcJ; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4C1gQX6KZJz9sSn for ; Thu, 1 Oct 2020 01:38:44 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731213AbgI3Pin (ORCPT ); Wed, 30 Sep 2020 11:38:43 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:57666 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726572AbgI3Pin (ORCPT ); Wed, 30 Sep 2020 11:38:43 -0400 Received: from fllv0035.itg.ti.com ([10.64.41.0]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 08UFcR7c044424; Wed, 30 Sep 2020 10:38:27 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1601480307; bh=4Fz6/znawPVT5Re4ej/ysxXwiAWhNVKJ7aypY2BXCzQ=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=ZWHVVQcJahYOEdM+zYNdFzVE305BLNXBwGsXuE9JQO5R/vZeDg+/G/fPy8eYPG7hP 9mxxMjK1ZHjE6LRjADigXOM0s/OP4tBuNuoSGKKQ1TZ61N/8lkO7ErcWyge1CiKmiT NPCxrRXoyPVmNO19R6b0UwqiIVVCa6z6mg+zR6FM= Received: from DLEE103.ent.ti.com (dlee103.ent.ti.com [157.170.170.33]) by fllv0035.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFcQjt034133; Wed, 30 Sep 2020 10:38:26 -0500 Received: from DLEE111.ent.ti.com (157.170.170.22) by DLEE103.ent.ti.com (157.170.170.33) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 30 Sep 2020 10:38:26 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DLEE111.ent.ti.com (157.170.170.22) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 30 Sep 2020 10:38:26 -0500 Received: from a0393678-ssd.dal.design.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 08UFZLZh033254; Wed, 30 Sep 2020 10:38:16 -0500 From: Kishon Vijay Abraham I To: Bjorn Helgaas , Jonathan Corbet , Kishon Vijay Abraham I , Lorenzo Pieralisi , Arnd Bergmann , Jon Mason , Dave Jiang , Allen Hubbe , Tom Joseph , Rob Herring CC: Greg Kroah-Hartman , , , , Subject: [PATCH v7 18/18] Documentation: PCI: Add userguide for PCI endpoint NTB function Date: Wed, 30 Sep 2020 21:05:19 +0530 Message-ID: <20200930153519.7282-19-kishon@ti.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200930153519.7282-1-kishon@ti.com> References: <20200930153519.7282-1-kishon@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Add documentation to help users use pci-epf-ntb function driver and existing host side NTB infrastructure for NTB functionality. Signed-off-by: Kishon Vijay Abraham I Reviewed-by: Randy Dunlap --- Documentation/PCI/endpoint/index.rst | 1 + Documentation/PCI/endpoint/pci-ntb-howto.rst | 160 +++++++++++++++++++ 2 files changed, 161 insertions(+) create mode 100644 Documentation/PCI/endpoint/pci-ntb-howto.rst diff --git a/Documentation/PCI/endpoint/index.rst b/Documentation/PCI/endpoint/index.rst index 9cb6e5f3c4d5..38ea1f604b6d 100644 --- a/Documentation/PCI/endpoint/index.rst +++ b/Documentation/PCI/endpoint/index.rst @@ -12,6 +12,7 @@ PCI Endpoint Framework pci-test-function pci-test-howto pci-ntb-function + pci-ntb-howto function/binding/pci-test function/binding/pci-ntb diff --git a/Documentation/PCI/endpoint/pci-ntb-howto.rst b/Documentation/PCI/endpoint/pci-ntb-howto.rst new file mode 100644 index 000000000000..b6e1073c9a39 --- /dev/null +++ b/Documentation/PCI/endpoint/pci-ntb-howto.rst @@ -0,0 +1,160 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================================================================== +PCI Non-Transparent Bridge (NTB) Endpoint Function (EPF) User Guide +=================================================================== + +:Author: Kishon Vijay Abraham I + +This document is a guide to help users use pci-epf-ntb function driver +and ntb_hw_epf host driver for NTB functionality. The list of steps to +be followed in the host side and EP side is given below. For the hardware +configuration and internals of NTB using configurable endpoints see +Documentation/PCI/endpoint/pci-ntb-function.rst + +Endpoint Device +=============== + +Endpoint Controller Devices +--------------------------- + +For implementing NTB functionality at least two endpoint controller devices +are required. +To find the list of endpoint controller devices in the system:: + + # ls /sys/class/pci_epc/ + 2900000.pcie-ep 2910000.pcie-ep + +If PCI_ENDPOINT_CONFIGFS is enabled:: + + # ls /sys/kernel/config/pci_ep/controllers + 2900000.pcie-ep 2910000.pcie-ep + + +Endpoint Function Drivers +------------------------- + +To find the list of endpoint function drivers in the system:: + + # ls /sys/bus/pci-epf/drivers + pci_epf_ntb pci_epf_ntb + +If PCI_ENDPOINT_CONFIGFS is enabled:: + + # ls /sys/kernel/config/pci_ep/functions + pci_epf_ntb pci_epf_ntb + + +Creating pci-epf-ntb Device +---------------------------- + +PCI endpoint function device can be created using the configfs. To create +pci-epf-ntb device, the following commands can be used:: + + # mount -t configfs none /sys/kernel/config + # cd /sys/kernel/config/pci_ep/ + # mkdir functions/pci_epf_ntb/func1 + +The "mkdir func1" above creates the pci-epf-ntb function device that will +be probed by pci_epf_ntb driver. + +The PCI endpoint framework populates the directory with the following +configurable fields:: + + # ls functions/pci_epf_ntb/func1 + baseclass_code deviceid msi_interrupts pci-epf-ntb.0 + progif_code secondary subsys_id vendorid + cache_line_size interrupt_pin msix_interrupts primary + revid subclass_code subsys_vendor_id + +The PCI endpoint function driver populates these entries with default values +when the device is bound to the driver. The pci-epf-ntb driver populates +vendorid with 0xffff and interrupt_pin with 0x0001:: + + # cat functions/pci_epf_ntb/func1/vendorid + 0xffff + # cat functions/pci_epf_ntb/func1/interrupt_pin + 0x0001 + + +Configuring pci-epf-ntb Device +------------------------------- + +The user can configure the pci-epf-ntb device using its configfs entry. In order +to change the vendorid and the deviceid, the following +commands can be used:: + + # echo 0x104c > functions/pci_epf_ntb/func1/vendorid + # echo 0xb00d > functions/pci_epf_ntb/func1/deviceid + +In order to configure NTB specific attributes, a new sub-directory to func1 +should be created:: + + # mkdir functions/pci_epf_ntb/func1/pci_epf_ntb.0/ + +The NTB function driver will populate this directory with various attributes +that can be configured by the user:: + + # ls functions/pci_epf_ntb/func1/pci_epf_ntb.0/ + db_count mw1 mw2 mw3 mw4 num_mws + spad_count + +A sample configuration for NTB function is given below:: + + # echo 4 > functions/pci_epf_ntb/func1/pci_epf_ntb.0/db_count + # echo 128 > functions/pci_epf_ntb/func1/pci_epf_ntb.0/spad_count + # echo 2 > functions/pci_epf_ntb/func1/pci_epf_ntb.0/num_mws + # echo 0x100000 > functions/pci_epf_ntb/func1/pci_epf_ntb.0/mw1 + # echo 0x100000 > functions/pci_epf_ntb/func1/pci_epf_ntb.0/mw2 + +Binding pci-epf-ntb Device to EP Controller +-------------------------------------------- + +NTB function device should be attached to two PCIe endpoint controllers +connected to the two hosts. Use the 'primary' and 'secondary' entries +inside NTB function device to attach one PCIe endpoint controller to +primary interface and the other PCIe endpoint controller to the secondary +interface. :: + + # ln -s controllers/2900000.pcie-ep/ functions/pci-epf-ntb/func1/primary + # ln -s controllers/2910000.pcie-ep/ functions/pci-epf-ntb/func1/secondary + +Once the above step is completed, both the PCI endpoint controllers are ready to +establish a link with the host. + + +Start the Link +-------------- + +In order for the endpoint device to establish a link with the host, the _start_ +field should be populated with '1'. For NTB, both the PCIe endpoint controllers +should establish link with the host:: + + #echo 1 > controllers/2900000.pcie-ep/start + #echo 1 > controllers/2910000.pcie-ep/start + + +RootComplex Device +================== + +lspci Output +------------ + +Note that the devices listed here correspond to the values populated in +"Creating pci-epf-ntb Device" section above:: + + # lspci + 0000:00:00.0 PCI bridge: Texas Instruments Device b00d + 0000:01:00.0 RAM memory: Texas Instruments Device b00d + + +Using ntb_hw_epf Device +----------------------- + +The host side software follows the standard NTB software architecture in Linux. +All the existing client side NTB utilities like NTB Transport Client and NTB +Netdev, NTB Ping Pong Test Client and NTB Tool Test Client can be used with NTB +function device. + +For more information on NTB see +:doc:`Non-Transparent Bridge <../../driver-api/ntb>`