From patchwork Wed Dec 11 13:39:29 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tobias Schramm X-Patchwork-Id: 1207674 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=linux-i2c-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=manjaro.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 47Xz8V277pz9sRH for ; Thu, 12 Dec 2019 01:00:10 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729513AbfLKOAI (ORCPT ); Wed, 11 Dec 2019 09:00:08 -0500 Received: from mail.manjaro.org ([176.9.38.148]:38226 "EHLO manjaro.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727851AbfLKOAI (ORCPT ); Wed, 11 Dec 2019 09:00:08 -0500 Received: from localhost (localhost [127.0.0.1]) by manjaro.org (Postfix) with ESMTP id 2281336E23B6; Wed, 11 Dec 2019 14:40:15 +0100 (CET) X-Virus-Scanned: Debian amavisd-new at manjaro.org Received: from manjaro.org ([127.0.0.1]) by localhost (manjaro.org [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id l9ZXN6hT5BHM; Wed, 11 Dec 2019 14:40:11 +0100 (CET) From: Tobias Schramm To: linux-kernel@vger.kernel.org, linux-pm@lists.linux-foundation.org, linux-i2c@vger.kernel.org Cc: anarsoul@gmail.com, sre@kernel.org, pali.rohar@gmail.com, david@lechnology.com, afd@ti.com, Tobias Schramm Subject: [PATCH 1/2] power: supply: add CW2015 Fuel Gauge driver Date: Wed, 11 Dec 2019 14:39:29 +0100 Message-Id: <20191211133930.7488-2-t.schramm@manjaro.org> In-Reply-To: <20191211133930.7488-1-t.schramm@manjaro.org> References: <20191211133930.7488-1-t.schramm@manjaro.org> MIME-Version: 1.0 Sender: linux-i2c-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-i2c@vger.kernel.org The CellWise CW2015 is a I2C interfaced shuntless Fuel Gauge for lithium-ion batteries. This patch adds support for the CellWise CW2015 Fuel Gauge. Signed-off-by: Tobias Schramm --- drivers/power/supply/Kconfig | 7 + drivers/power/supply/Makefile | 1 + drivers/power/supply/cw2015_battery.c | 962 ++++++++++++++++++++++++++ include/linux/power/cw2015_battery.h | 122 ++++ 4 files changed, 1092 insertions(+) create mode 100644 drivers/power/supply/cw2015_battery.c create mode 100644 include/linux/power/cw2015_battery.h diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index 27164a1d3c7c..e3eb2dbaf44f 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -116,6 +116,13 @@ config BATTERY_CPCAP Say Y here to enable support for battery on Motorola phones and tablets such as droid 4. +config BATTERY_CW2015 + tristate "CW2015 battery driver" + depends on I2C + help + Say Y here to enable support for the cellwise cw2015 + battery fuel gauge (used in the Pinebook Pro & others) + config BATTERY_DS2760 tristate "DS2760 battery driver (HP iPAQ & others)" depends on W1 diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile index 6c7da920ea83..69727a10e835 100644 --- a/drivers/power/supply/Makefile +++ b/drivers/power/supply/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o obj-$(CONFIG_BATTERY_AXP20X) += axp20x_battery.o obj-$(CONFIG_CHARGER_AXP20X) += axp20x_ac_power.o obj-$(CONFIG_BATTERY_CPCAP) += cpcap-battery.o +obj-$(CONFIG_BATTERY_CW2015) += cw2015_battery.o obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o diff --git a/drivers/power/supply/cw2015_battery.c b/drivers/power/supply/cw2015_battery.c new file mode 100644 index 000000000000..4f1e75c50374 --- /dev/null +++ b/drivers/power/supply/cw2015_battery.c @@ -0,0 +1,962 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Fuel gauge driver for CellWise 2013 / 2015 + * + * Copyright (C) 2012, RockChip + * Copyright (C) 2019, Tobias Schramm + * + * Authors: xuhuicong + * Authors: Tobias Schramm + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +static int dbg_enable; +module_param_named(dbg_level, dbg_enable, int, 0644); + +#define cw_printk(args...) \ + do { \ + if (dbg_enable) { \ + pr_info(args); \ + } \ + } while (0) + + +#define PREFIX "cellwise," + +static int cw_read(struct i2c_client *client, u8 reg, u8 buf[]) +{ + return i2c_smbus_read_i2c_block_data(client, reg, 1, buf); +} + +static int cw_write(struct i2c_client *client, u8 reg, u8 const buf[]) +{ + return i2c_smbus_write_i2c_block_data(client, reg, 1, &buf[0]); +} + +static int cw_read_word(struct i2c_client *client, u8 reg, u8 buf[]) +{ + return i2c_smbus_read_i2c_block_data(client, reg, 2, buf); +} + +int cw_update_config_info(struct cw_battery *cw_bat) +{ + int ret; + u8 reg_val; + u8 i; + u8 reset_val; + + cw_printk("[FGADC] test config_info = 0x%x\n", + cw_bat->plat_data.cw_bat_config_info[0]); + + /* make sure no in sleep mode */ + ret = cw_read(cw_bat->client, CW2015_REG_MODE, ®_val); + if (ret < 0) + return ret; + + reset_val = reg_val; + if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) { + dev_err(&cw_bat->client->dev, + "device in sleep mode, cannot update battery info\n"); + return -1; + } + + /* update new battery info */ + for (i = 0; i < CW2015_SIZE_BATINFO; i++) { + ret = + cw_write(cw_bat->client, CW2015_REG_BATINFO + i, + (u8 *)&cw_bat->plat_data.cw_bat_config_info[i]); + + if (ret < 0) + return ret; + } + + reg_val |= CW2015_CONFIG_UPDATE_FLG; /* set UPDATE_FLAG */ + reg_val &= ~CW2015_MASK_ATHD; /* clear ATHD */ + reg_val |= CW2015_ATHD(cw_bat->alert_level); /* set CW2015_ATHD */ + ret = cw_write(cw_bat->client, CW2015_REG_CONFIG, ®_val); + if (ret < 0) + return ret; + + /* check 2015/cw2013 for CW2015_ATHD & update_flag */ + ret = cw_read(cw_bat->client, CW2015_REG_CONFIG, ®_val); + if (ret < 0) + return ret; + + if (!(reg_val & CW2015_CONFIG_UPDATE_FLG)) { + dev_info(&cw_bat->client->dev, + "update flag for new battery info have not set..\n"); + } + + if ((reg_val & CW2015_MASK_ATHD) != CW2015_ATHD(cw_bat->alert_level)) + dev_info(&cw_bat->client->dev, "the new CW2015_ATHD have not set..\n"); + + /* reset */ + reset_val &= ~(CW2015_MODE_RESTART); + reg_val = reset_val | CW2015_MODE_RESTART; + ret = cw_write(cw_bat->client, CW2015_REG_MODE, ®_val); + if (ret < 0) + return ret; + + msleep(10); + ret = cw_write(cw_bat->client, CW2015_REG_MODE, &reset_val); + if (ret < 0) + return ret; + + cw_printk("cw2015 update config success!\n"); + + return 0; +} + +static int cw_init(struct cw_battery *cw_bat) +{ + int ret; + int i; + u8 reg_val = CW2015_MODE_SLEEP; + + if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) { + reg_val = CW2015_MODE_NORMAL; + ret = cw_write(cw_bat->client, CW2015_REG_MODE, ®_val); + if (ret < 0) + return ret; + } + + ret = cw_read(cw_bat->client, CW2015_REG_CONFIG, ®_val); + if (ret < 0) + return ret; + + if ((reg_val & CW2015_MASK_ATHD) != CW2015_ATHD(cw_bat->alert_level)) { + dev_info(&cw_bat->client->dev, "the new CW2015_ATHD have not set\n"); + reg_val &= ~CW2015_MASK_ATHD; + reg_val |= ~CW2015_ATHD(cw_bat->alert_level); + ret = cw_write(cw_bat->client, CW2015_REG_CONFIG, ®_val); + if (ret < 0) + return ret; + } + + ret = cw_read(cw_bat->client, CW2015_REG_CONFIG, ®_val); + if (ret < 0) + return ret; + + if (!(reg_val & CW2015_CONFIG_UPDATE_FLG)) { + cw_printk("update config flg is true, need update config\n"); + ret = cw_update_config_info(cw_bat); + if (ret < 0) { + dev_info(&cw_bat->client->dev, + "update flag for new battery info have not set\n"); + return ret; + } + } else { + for (i = 0; i < CW2015_SIZE_BATINFO; i++) { + ret = cw_read(cw_bat->client, (CW2015_REG_BATINFO + i), + ®_val); + if (ret < 0) + return ret; + + if (cw_bat->plat_data.cw_bat_config_info[i] != reg_val) + break; + } + + if (i != CW2015_SIZE_BATINFO) { + dev_info(&cw_bat->client->dev, + "update flag for new battery info have not set\n"); + ret = cw_update_config_info(cw_bat); + if (ret < 0) + return ret; + } + } + + for (i = 0; i < CW2015_READ_TRIES; i++) { + ret = cw_read(cw_bat->client, CW2015_REG_SOC, ®_val); + if (ret < 0) + return ret; + else if (reg_val <= 100) // SOC can't be more than 100 % + break; + msleep(120); + } + + if (i >= CW2015_READ_TRIES) { + reg_val = CW2015_MODE_SLEEP; + ret = cw_write(cw_bat->client, CW2015_REG_MODE, ®_val); + dev_info(&cw_bat->client->dev, "report battery capacity error"); + return -1; + } + + cw_printk("cw2015 init success!\n"); + return 0; +} + +static int check_charger_online(struct device *dev, void *data) +{ + struct device *cw_dev = data; + struct power_supply *supply = dev_get_drvdata(dev); + union power_supply_propval val; + + if (supply->desc->type == POWER_SUPPLY_TYPE_BATTERY) { + dev_dbg(cw_dev, "Skipping power supply %s since it is a battery\n", + dev_name(dev)); + return 0; // Bail out, not a charger + } + if (!supply->desc->get_property(supply, POWER_SUPPLY_PROP_ONLINE, + &val)) { + return val.intval; + } + dev_dbg(cw_dev, "Skipping power supply %s since it does not " + "have an online property\n", dev_name(dev)); + return 0; +} + +#ifdef CONFIG_OF +static int device_parent_match_of_node(struct device *dev, const void *np) +{ + while (dev) { + if (dev->of_node == np) { + return 1; + } + dev = dev->parent; + } + return 0; +} +#endif + +static int get_charge_state(struct cw_battery *cw_bat) +{ + struct device *cw_dev = &cw_bat->client->dev; +#ifdef CONFIG_OF + int i = 0, online = 0; + struct device_node *supply_of; + + if (!cw_dev->of_node) { + dev_dbg(cw_dev, "Charger does not have an of node, scanning " + "all supplies\n"); +#endif + return !!class_for_each_device(power_supply_class, NULL, + cw_dev, check_charger_online); +#ifdef CONFIG_OF + } + do { + struct device *supply_dev; + + dev_dbg(cw_dev, "Scanning linked supplies of %s\n", + cw_dev->of_node->name); + supply_of = of_parse_phandle(cw_dev->of_node, "power-supplies", + i++); + if (!supply_of) { + dev_dbg(cw_dev, "Got empty of node, scan done\n"); + break; + } + dev_dbg(cw_dev, "Got power supply %s\n", supply_of->name); + supply_dev = class_find_device(power_supply_class, NULL, + supply_of, + device_parent_match_of_node); + if (supply_dev) { + online = check_charger_online(supply_dev, NULL); + dev_dbg(supply_dev, "Charger online: %d\n", online); + put_device(supply_dev); + } else { + dev_warn(cw_dev, "Failed to get device for device " + "node %s\n", supply_of->name); + } + of_node_put(supply_of); + } while (!online); + return online; +#endif +} + +static int cw_por(struct cw_battery *cw_bat) +{ + int ret; + unsigned char reset_val; + + reset_val = CW2015_MODE_SLEEP; + ret = cw_write(cw_bat->client, CW2015_REG_MODE, &reset_val); + if (ret < 0) + return ret; + reset_val = CW2015_MODE_NORMAL; + msleep(20); + ret = cw_write(cw_bat->client, CW2015_REG_MODE, &reset_val); + if (ret < 0) + return ret; + ret = cw_init(cw_bat); + if (ret) + return ret; + return 0; +} + +static int cw_get_capacity(struct cw_battery *cw_bat) +{ + int cw_capacity; + int ret; + unsigned char reg_val[2]; + + static int reset_loop; + static int charging_loop; + static int discharging_loop; + static int jump_flag; + static int charging_5_loop; + int sleep_cap; + + ret = cw_read_word(cw_bat->client, CW2015_REG_SOC, reg_val); + if (ret < 0) + return ret; + + cw_capacity = reg_val[0]; + + if ((cw_capacity < 0) || (cw_capacity > 100)) { + cw_printk("Error: cw_capacity = %d\n", cw_capacity); + reset_loop++; + if (reset_loop > + (CW2015_BATTERY_CAPACITY_ERROR / cw_bat->monitor_sec)) { + cw_por(cw_bat); + reset_loop = 0; + } + return cw_bat->capacity; + } + reset_loop = 0; + + /* case 1 : aviod swing */ + if (((cw_bat->charger_mode > 0) && + (cw_capacity <= cw_bat->capacity - 1) && + (cw_capacity > cw_bat->capacity - 9)) || + ((cw_bat->charger_mode == 0) && + (cw_capacity == (cw_bat->capacity + 1)))) { + if (!(cw_capacity == 0 && cw_bat->capacity <= 2)) + cw_capacity = cw_bat->capacity; + } + + /* case 2 : aviod no charge full */ + if ((cw_bat->charger_mode > 0) && + (cw_capacity >= 95) && (cw_capacity <= cw_bat->capacity)) { + cw_printk("Chaman join no charge full\n"); + charging_loop++; + if (charging_loop > + (CW2015_BATTERY_UP_MAX_CHANGE / cw_bat->monitor_sec)) { + cw_capacity = (cw_bat->capacity + 1) <= 100 ? + (cw_bat->capacity + 1) : 100; + charging_loop = 0; + jump_flag = 1; + } else { + cw_capacity = cw_bat->capacity; + } + } + + /* case 3 : avoid battery level jump to CW_BAT */ + if ((cw_bat->charger_mode == 0) && + (cw_capacity <= cw_bat->capacity) && + (cw_capacity >= 90) && (jump_flag == 1)) { + cw_printk("Chaman join no charge full discharging\n"); +#ifdef CONFIG_PM + if (cw_bat->suspend_resume_mark == 1) { + cw_bat->suspend_resume_mark = 0; + sleep_cap = (cw_bat->after.tv_sec + + discharging_loop * + (cw_bat->monitor_sec / 1000)) / + (CW2015_BATTERY_DOWN_MAX_CHANGE / 1000); + cw_printk("sleep_cap = %d\n", sleep_cap); + + if (cw_capacity >= cw_bat->capacity - sleep_cap) { + return cw_capacity; + } + if (!sleep_cap) + discharging_loop = discharging_loop + + 1 + cw_bat->after.tv_sec / + (cw_bat->monitor_sec / 1000); + else + discharging_loop = 0; + cw_printk("discharging_loop = %d\n", + discharging_loop); + return cw_bat->capacity - sleep_cap; + } +#endif + discharging_loop++; + if (discharging_loop > + (CW2015_BATTERY_DOWN_MAX_CHANGE / cw_bat->monitor_sec)) { + if (cw_capacity >= cw_bat->capacity - 1) + jump_flag = 0; + else + cw_capacity = cw_bat->capacity - 1; + + discharging_loop = 0; + } else { + cw_capacity = cw_bat->capacity; + } + } + + /* case 4 : avoid battery level is 0% when long time charging */ + if ((cw_bat->charger_mode > 0) && (cw_capacity == 0)) { + charging_5_loop++; + if (charging_5_loop > + CW2015_BATTERY_CHARGING_ZERO / cw_bat->monitor_sec) { + cw_por(cw_bat); + charging_5_loop = 0; + } + } else if (charging_5_loop != 0) { + charging_5_loop = 0; + } +#ifdef CONFIG_PM + if (cw_bat->suspend_resume_mark == 1) + cw_bat->suspend_resume_mark = 0; +#endif + return cw_capacity; +} + +static int cw_get_voltage(struct cw_battery *cw_bat) +{ + int ret; + u8 reg_val[2]; + u16 value16, value16_1, value16_2, value16_3; + int voltage; + int res1, res2; + + ret = cw_read_word(cw_bat->client, CW2015_REG_VCELL, reg_val); + if (ret < 0) + return ret; + value16 = (reg_val[0] << 8) + reg_val[1]; + + ret = cw_read_word(cw_bat->client, CW2015_REG_VCELL, reg_val); + if (ret < 0) + return ret; + value16_1 = (reg_val[0] << 8) + reg_val[1]; + + ret = cw_read_word(cw_bat->client, CW2015_REG_VCELL, reg_val); + if (ret < 0) + return ret; + value16_2 = (reg_val[0] << 8) + reg_val[1]; + + if (value16 > value16_1) { + value16_3 = value16; + value16 = value16_1; + value16_1 = value16_3; + } + + if (value16_1 > value16_2) { + value16_3 = value16_1; + value16_1 = value16_2; + value16_2 = value16_3; + } + + if (value16 > value16_1) { + value16_3 = value16; + value16 = value16_1; + value16_1 = value16_3; + } + + voltage = value16_1 * 312 / 1024; + + if (cw_bat->plat_data.divider_high && + cw_bat->plat_data.divider_low) { + res1 = cw_bat->plat_data.divider_high; + res2 = cw_bat->plat_data.divider_low; + voltage = voltage * (res1 + res2) / res2; + } + + dev_dbg(&cw_bat->client->dev, "the cw201x voltage=%d,reg_val=%x %x\n", + voltage, reg_val[0], reg_val[1]); + return voltage; +} + +/*This function called when get RRT from cw2015*/ +static int cw_get_time_to_empty(struct cw_battery *cw_bat) +{ + int ret; + u8 reg_val; + u16 value16; + + ret = cw_read(cw_bat->client, CW2015_REG_RRT_ALERT, ®_val); + if (ret < 0) + return ret; + + value16 = reg_val; + + ret = cw_read(cw_bat->client, CW2015_REG_RRT_ALERT + 1, ®_val); + if (ret < 0) + return ret; + + value16 = ((value16 << 8) + reg_val) & CW2015_MASK_SOC; + return value16; +} + +static void cw_update_charge_status(struct cw_battery *cw_bat) +{ + int cw_charger_mode; + + cw_charger_mode = get_charge_state(cw_bat); + if (cw_bat->charger_mode != cw_charger_mode) { + cw_bat->charger_mode = cw_charger_mode; + cw_bat->bat_change = 1; + if (cw_charger_mode) + cw_bat->charge_count++; + } +} + +static void cw_update_capacity(struct cw_battery *cw_bat) +{ + int cw_capacity; + + cw_capacity = cw_get_capacity(cw_bat); + if ((cw_capacity >= 0) && (cw_capacity <= 100) && + (cw_bat->capacity != cw_capacity)) { + cw_bat->capacity = cw_capacity; + cw_bat->bat_change = 1; + } +} + +static void cw_update_vol(struct cw_battery *cw_bat) +{ + int ret; + + ret = cw_get_voltage(cw_bat); + if ((ret >= 0) && (cw_bat->voltage != ret)) + cw_bat->voltage = ret; +} + +static void cw_update_status(struct cw_battery *cw_bat) +{ + int status; + + if (cw_bat->charger_mode > 0) { + if (cw_bat->capacity >= 100) + status = POWER_SUPPLY_STATUS_FULL; + else + status = POWER_SUPPLY_STATUS_CHARGING; + } else { + status = POWER_SUPPLY_STATUS_DISCHARGING; + } + + if (cw_bat->status != status) { + cw_bat->status = status; + cw_bat->bat_change = 1; + } +} + +static void cw_update_time_to_empty(struct cw_battery *cw_bat) +{ + int ret; + + ret = cw_get_time_to_empty(cw_bat); + if ((ret >= 0) && (cw_bat->time_to_empty != ret)) { + cw_bat->time_to_empty = ret; + cw_bat->bat_change = 1; + } +} + +static void cw_bat_work(struct work_struct *work) +{ + struct delayed_work *delay_work; + struct cw_battery *cw_bat; + int ret; + u8 reg_val; + int i = 0; + + delay_work = container_of(work, struct delayed_work, work); + cw_bat = + container_of(delay_work, struct cw_battery, battery_delay_work); + + /* Add for battery swap start */ + ret = cw_read(cw_bat->client, CW2015_REG_MODE, ®_val); + if (ret < 0) { + cw_bat->bat_mode = MODE_VIRTUAL; + cw_bat->bat_change = 1; + } else { + if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) { + for (i = 0; i < 5; i++) { + if (cw_por(cw_bat) == 0) + break; + } + } + cw_update_capacity(cw_bat); + cw_update_vol(cw_bat); + cw_update_charge_status(cw_bat); + cw_update_status(cw_bat); + cw_update_time_to_empty(cw_bat); + } + /* Add for battery swap end */ + cw_printk("charger_mod = %d\n", cw_bat->charger_mode); + cw_printk("status = %d\n", cw_bat->status); + cw_printk("capacity = %d\n", cw_bat->capacity); + cw_printk("voltage = %d\n", cw_bat->voltage); + +#ifdef CONFIG_PM + if (cw_bat->suspend_resume_mark == 1) + cw_bat->suspend_resume_mark = 0; +#endif + + if (cw_bat->bat_change == 1) { + power_supply_changed(cw_bat->rk_bat); + cw_bat->bat_change = 0; + } + queue_delayed_work(cw_bat->battery_workqueue, + &cw_bat->battery_delay_work, + msecs_to_jiffies(cw_bat->monitor_sec)); +} + +static bool cw_battery_valid_time_to_empty(struct cw_battery *cw_bat) +{ + return cw_bat->time_to_empty > 0 && + cw_bat->time_to_empty < CW2015_MASK_SOC && + cw_bat->status == POWER_SUPPLY_STATUS_DISCHARGING; +} + +static int cw_battery_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + int ret = 0; + struct cw_battery *cw_bat; + + cw_bat = power_supply_get_drvdata(psy); + switch (psp) { + case POWER_SUPPLY_PROP_CAPACITY: + val->intval = cw_bat->capacity; + if (cw_bat->bat_mode == MODE_VIRTUAL) + val->intval = CW2015_VIRTUAL_SOC; + break; + case POWER_SUPPLY_PROP_STATUS: + val->intval = cw_bat->status; + if (cw_bat->bat_mode == MODE_VIRTUAL) + val->intval = CW2015_VIRTUAL_STATUS; + break; + + case POWER_SUPPLY_PROP_HEALTH: + val->intval = POWER_SUPPLY_HEALTH_GOOD; + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = cw_bat->voltage <= 0 ? 0 : 1; + if (cw_bat->bat_mode == MODE_VIRTUAL) + val->intval = CW2015_VIRTUAL_PRESET; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = cw_bat->voltage * 1000; + if (cw_bat->bat_mode == MODE_VIRTUAL) + val->intval = CW2015_VIRTUAL_VOLTAGE * 1000; + break; + + case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: + if (cw_battery_valid_time_to_empty(cw_bat)) { + val->intval = cw_bat->time_to_empty; + } else { + val->intval = 0; + } + if (cw_bat->bat_mode == MODE_VIRTUAL) + val->intval = CW2015_VIRTUAL_TIME2EMPTY; + break; + + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + break; + + case POWER_SUPPLY_PROP_CHARGE_COUNTER: + val->intval = cw_bat->charge_count; + break; + + case POWER_SUPPLY_PROP_CHARGE_FULL: + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + val->intval = cw_bat->plat_data.design_capacity * 1000; + break; + + case POWER_SUPPLY_PROP_TEMP: + val->intval = CW2015_VIRTUAL_TEMPERATURE; + break; + + case POWER_SUPPLY_PROP_CURRENT_NOW: + if (cw_battery_valid_time_to_empty(cw_bat)) { + // calculate remaining capacity + val->intval = cw_bat->plat_data.design_capacity * 1000; + val->intval = val->intval * cw_bat->capacity / 100; + + // estimate current based on time to empty (in minutes) + val->intval = 60 * val->intval / cw_bat->time_to_empty; + } else { + val->intval = 0; + } + + if (cw_bat->bat_mode == MODE_VIRTUAL) + val->intval = CW2015_VIRTUAL_CURRENT; + break; + + default: + break; + } + return ret; +} + +static enum power_supply_property cw_battery_properties[] = { + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_COUNTER, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +static const struct power_supply_desc cw2015_bat_desc = { + .name = "cw2015-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = cw_battery_properties, + .num_properties = ARRAY_SIZE(cw_battery_properties), + .get_property = cw_battery_get_property, +}; + +#ifdef CONFIG_OF +static int cw2015_parse_dt(struct cw_battery *cw_bat) +{ + struct device *dev = &cw_bat->client->dev; + struct device_node *node = dev->of_node; + struct property *prop; + int length; + u32 value; + int ret; + struct cw_bat_platform_data *data = &cw_bat->plat_data; + + if (!node) + return -ENODEV; + + memset(data, 0, sizeof(*data)); + + /* determine the number of config info */ + prop = of_find_property(node, PREFIX"bat-config-info", &length); + if (!prop) + return -EINVAL; + + length /= sizeof(u32); + + if (length > 0) { + size_t size = sizeof(*data->cw_bat_config_info) * length; + + data->cw_bat_config_info = devm_kzalloc(dev, size, GFP_KERNEL); + if (!data->cw_bat_config_info) + return -ENOMEM; + + ret = of_property_read_u32_array(node, PREFIX"bat-config-info", + data->cw_bat_config_info, + length); + if (ret < 0) + return ret; + } + + cw_bat->bat_mode = MODE_BATTERY; + cw_bat->monitor_sec = CW2015_DEFAULT_MONITOR_SEC * + CW2015_TIMER_MS_COUNTS; + + prop = of_find_property(node, PREFIX"voltage-divider", &length); + if (prop) { + length /= sizeof(u32); + if (length != 2) { + dev_err(dev, "Length of voltage divider array must be " + "2, not %u\n", length); + return -EINVAL; + } + ret = of_property_read_u32_index(node, PREFIX"voltage-divider", + 0, &data->divider_high); + if (ret) { + dev_err(dev, "Failed to read value of high side " + "voltage divider resistor: %d\n", ret); + return ret; + } + ret = of_property_read_u32_index(node, PREFIX"voltage-divider", + 1, &data->divider_low); + if (ret) { + dev_err(dev, "Failed to read value of low side " + "voltage divider resistor: %d\n", ret); + return ret; + } + } + + ret = of_property_read_u32(node, PREFIX"divider-res2", &value); + if (ret < 0) + value = 0; + data->divider_low = value; + + ret = of_property_read_u32(node, PREFIX"virtual-power", &value); + if (ret < 0) + value = 0; + cw_bat->bat_mode = value; + + ret = of_property_read_u32(node, PREFIX"monitor-interval", &value); + if (ret < 0) + dev_err(dev, "monitor-interval missing!\n"); + else + cw_bat->monitor_sec = value * CW2015_TIMER_MS_COUNTS; + + ret = of_property_read_u32(node, PREFIX"design-capacity", &value); + if (ret < 0) { + dev_err(dev, "design-capacity missing!\n"); + data->design_capacity = 2000; + } else { + data->design_capacity = value; + } + + of_property_read_u8(node, PREFIX"alert-level", &cw_bat->alert_level); + if (cw_bat->alert_level > 100) { + dev_err(dev, "invalid alert_level, clamping to 100 %%\n"); + cw_bat->alert_level = 100; + } + + return 0; +} +#else +static int cw2015_parse_dt(struct cw_battery *cw_bat) +{ + return -ENODEV; +} +#endif + +static int cw_bat_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct cw_battery *cw_bat; + struct power_supply_config psy_cfg = {0}; + + cw_bat = devm_kzalloc(&client->dev, sizeof(*cw_bat), GFP_KERNEL); + if (!cw_bat) { + return -ENOMEM; + } + + i2c_set_clientdata(client, cw_bat); + cw_bat->client = client; + + ret = cw2015_parse_dt(cw_bat); + if (ret < 0) { + dev_err(&client->dev, + "failed to find cw2015 platform data\n"); + return ret; + } + + cw_bat->capacity = 1; + cw_bat->voltage = 0; + cw_bat->status = 0; + cw_bat->suspend_resume_mark = 0; + cw_bat->charger_mode = CW2015_NO_CHARGING; + cw_bat->bat_change = 0; + + ret = cw_init(cw_bat); + if (ret) { + pr_err("%s cw_init error\n", __func__); + return ret; + } + + psy_cfg.drv_data = cw_bat; + + cw_bat->rk_bat = devm_power_supply_register(&client->dev, + &cw2015_bat_desc, &psy_cfg); + if (IS_ERR(cw_bat->rk_bat)) { + dev_err(&cw_bat->client->dev, + "power supply register rk_bat error\n"); + return -1; + } + + cw_bat->battery_workqueue = create_singlethread_workqueue("rk_battery"); + INIT_DELAYED_WORK(&cw_bat->battery_delay_work, cw_bat_work); + queue_delayed_work(cw_bat->battery_workqueue, + &cw_bat->battery_delay_work, msecs_to_jiffies(10)); + + dev_info(&cw_bat->client->dev, + "cw2015/cw2013 driver probe success\n"); + return 0; +} + +#ifdef CONFIG_PM +static int cw_bat_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cw_battery *cw_bat = i2c_get_clientdata(client); + + ktime_get_boottime_ts64(&cw_bat->suspend_time_before); + cancel_delayed_work(&cw_bat->battery_delay_work); + return 0; +} + +static int cw_bat_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cw_battery *cw_bat = i2c_get_clientdata(client); + + cw_bat->suspend_resume_mark = 1; + ktime_get_boottime_ts64(&cw_bat->after); + cw_bat->after = timespec64_sub(cw_bat->after, + cw_bat->suspend_time_before); + queue_delayed_work(cw_bat->battery_workqueue, + &cw_bat->battery_delay_work, msecs_to_jiffies(2)); + return 0; +} + +static const struct dev_pm_ops cw_bat_pm_ops = { + .suspend = cw_bat_suspend, + .resume = cw_bat_resume, +}; +#endif + +static int cw_bat_remove(struct i2c_client *client) +{ + struct cw_battery *cw_bat = i2c_get_clientdata(client); + + dev_dbg(&cw_bat->client->dev, "%s\n", __func__); + cancel_delayed_work(&cw_bat->battery_delay_work); + return 0; +} + +static const struct i2c_device_id cw_bat_id_table[] = { + { "cw201x", 0 }, + { "cw2013", 0 }, + { "cw2015", 0 }, + {} +}; + +static const struct of_device_id cw2015_of_match[] = { + { .compatible = PREFIX"cw201x" }, + { .compatible = PREFIX"cw2013" }, + { .compatible = PREFIX"cw2015" }, + { }, +}; +MODULE_DEVICE_TABLE(of, cw2015_of_match); + +static struct i2c_driver cw_bat_driver = { + .driver = { + .name = PREFIX"cw201x", +#ifdef CONFIG_PM + .pm = &cw_bat_pm_ops, +#endif + }, + .probe = cw_bat_probe, + .remove = cw_bat_remove, + .id_table = cw_bat_id_table, +}; + +static int __init cw_bat_init(void) +{ + return i2c_add_driver(&cw_bat_driver); +} + +static void __exit cw_bat_exit(void) +{ + i2c_del_driver(&cw_bat_driver); +} + +module_init(cw_bat_init); +module_exit(cw_bat_exit); + +MODULE_AUTHOR("xhc "); +MODULE_AUTHOR("Tobias Schramm "); +MODULE_DESCRIPTION("cw2015/cw2013 battery driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/power/cw2015_battery.h b/include/linux/power/cw2015_battery.h new file mode 100644 index 000000000000..77c8ce17799f --- /dev/null +++ b/include/linux/power/cw2015_battery.h @@ -0,0 +1,122 @@ +/* + * Fuel gauge driver for CellWise 2013 / 2015 + * + * Copyright (C) 2012, RockChip + * Copyright (C) 2019, Tobias Schramm + * + * Authors: xuhuicong + * Authors: Tobias Schramm + * + * Based on rk30_adc_battery.c + + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef CW2015_BATTERY_H +#define CW2015_BATTERY_H + +#define CW2015_SIZE_BATINFO 64 + +#define CW2015_GPIO_HIGH 1 +#define CW2015_GPIO_LOW 0 + +#define CW2015_READ_TRIES 30 + +#define CW2015_REG_VERSION 0x0 +#define CW2015_REG_VCELL 0x2 +#define CW2015_REG_SOC 0x4 +#define CW2015_REG_RRT_ALERT 0x6 +#define CW2015_REG_CONFIG 0x8 +#define CW2015_REG_MODE 0xA +#define CW2015_REG_BATINFO 0x10 + +#define CW2015_MODE_SLEEP_MASK (0x3<<6) +#define CW2015_MODE_SLEEP (0x3<<6) +#define CW2015_MODE_NORMAL (0x0<<6) +#define CW2015_MODE_QUICK_START (0x3<<4) +#define CW2015_MODE_RESTART (0xf<<0) + +#define CW2015_CONFIG_UPDATE_FLG (0x01<<1) +#define CW2015_ATHD(x) ((x)<<3) +#define CW2015_MASK_ATHD (0x1f<<3) +#define CW2015_MASK_SOC (0x1fff) + +#define CW2015_I2C_SPEED 100000 +#define CW2015_BATTERY_UP_MAX_CHANGE (420 * 1000) +#define CW2015_BATTERY_DOWN_MAX_CHANGE (120 * 1000) +#define CW2015_BATTERY_DOWN_CHANGE 60 +#define CW2015_BATTERY_DOWN_MIN_CHANGE_RUN 30 +#define CW2015_BATTERY_DOWN_MIN_CHANGE_SLEEP 1800 +#define CW2015_BATTERY_JUMP_TO_ZERO (30 * 1000) +#define CW2015_BATTERY_CAPACITY_ERROR (40 * 1000) +#define CW2015_BATTERY_CHARGING_ZERO (1800 * 1000) + +#define CW2015_DOUBLE_SERIES_BATTERY 0 + +#define CW2015_CHARGING_ON 1 +#define CW2015_NO_CHARGING 0 + +#define CW2015_BATTERY_DOWN_MAX_CHANGE_RUN_AC_ONLINE 3600 + +#define CW2015_NO_STANDARD_AC_BIG_CHARGE_MODE 1 +/* #define CW2015_SYSTEM_SHUTDOWN_VOLTAGE 3400000 */ +#define CW2015_BAT_LOW_INTERRUPT 1 + +#define CW2015_USB_CHARGER_MODE 1 +#define CW2015_AC_CHARGER_MODE 2 +#define CW2015_QUICKSTART 0 + +#define CW2015_TIMER_MS_COUNTS 1000 +#define CW2015_DEFAULT_MONITOR_SEC 8 + +/* virtual params */ +#define CW2015_VIRTUAL_CURRENT 1000 +#define CW2015_VIRTUAL_VOLTAGE 3888 +#define CW2015_VIRTUAL_SOC 66 +#define CW2015_VIRTUAL_PRESET 1 +#define CW2015_VIRTUAL_TEMPERATURE 188 +#define CW2015_VIRTUAL_TIME2EMPTY 60 +#define CW2015_VIRTUAL_STATUS POWER_SUPPLY_STATUS_CHARGING + +enum bat_mode { + MODE_BATTERY = 0, + MODE_VIRTUAL, +}; + +struct cw_bat_platform_data { + u32 divider_high; + u32 divider_low; + u32 *cw_bat_config_info; + int design_capacity; +}; + +struct cw_battery { + struct i2c_client *client; + struct workqueue_struct *battery_workqueue; + struct delayed_work battery_delay_work; + struct cw_bat_platform_data plat_data; + + struct power_supply *rk_bat; + +#ifdef CONFIG_PM + struct timespec64 suspend_time_before; + struct timespec64 after; + int suspend_resume_mark; +#endif + int charger_mode; + int capacity; + int voltage; + int status; + int time_to_empty; + int alt; + u32 monitor_sec; + u32 bat_mode; + int bat_change; + int charge_count; + u8 alert_level; +}; + +#endif From patchwork Wed Dec 11 13:39:30 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tobias Schramm X-Patchwork-Id: 1207673 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=linux-i2c-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=manjaro.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 47Xz8T5XBMz9sPh for ; Thu, 12 Dec 2019 01:00:09 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727554AbfLKOAH (ORCPT ); Wed, 11 Dec 2019 09:00:07 -0500 Received: from mail.manjaro.org ([176.9.38.148]:38232 "EHLO manjaro.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729513AbfLKOAH (ORCPT ); Wed, 11 Dec 2019 09:00:07 -0500 Received: from localhost (localhost [127.0.0.1]) by manjaro.org (Postfix) with ESMTP id DFD7736E32E4; Wed, 11 Dec 2019 14:40:16 +0100 (CET) X-Virus-Scanned: Debian amavisd-new at manjaro.org Received: from manjaro.org ([127.0.0.1]) by localhost (manjaro.org [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 9BTMtQYUYIYh; Wed, 11 Dec 2019 14:40:13 +0100 (CET) From: Tobias Schramm To: linux-kernel@vger.kernel.org, linux-pm@lists.linux-foundation.org, linux-i2c@vger.kernel.org Cc: anarsoul@gmail.com, sre@kernel.org, pali.rohar@gmail.com, david@lechnology.com, afd@ti.com, Tobias Schramm Subject: [PATCH 2/2] dt-bindings: power: supply: cw2015_battery: add device tree binding documentation Date: Wed, 11 Dec 2019 14:39:30 +0100 Message-Id: <20191211133930.7488-3-t.schramm@manjaro.org> In-Reply-To: <20191211133930.7488-1-t.schramm@manjaro.org> References: <20191211133930.7488-1-t.schramm@manjaro.org> MIME-Version: 1.0 Sender: linux-i2c-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-i2c@vger.kernel.org This patch adds the ds binding document for the cw2015 Fuel Gauge. Signed-off-by: Tobias Schramm --- .../bindings/power/supply/cw2015_battery.txt | 37 +++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/cw2015_battery.txt diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.txt b/Documentation/devicetree/bindings/power/supply/cw2015_battery.txt new file mode 100644 index 000000000000..e847391268f3 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.txt @@ -0,0 +1,37 @@ +cw2015_battery +~~~~~~~~~~~~~~~~ + +The cellwise CW2015 is a shuntless single/multi-cell battery fuel gauge. + +Required properties : + - compatible : "cellwise,cw2015" + - cellwise,bat-config-info : Binary battery info blob + +Optional properties : + - cellwise,monitor-interval : Measurement interval in seconds + - cellwise,voltage-divider : Voltage divider for multi-cell packs, + specified as two integer values , in ohms. + - cellwise,virtual-power : Default to disconnected battery state (gauge in pack mode) + - cellwise,design-capacity : Design capacity of the battery cell in milliampere hours + - cellwise,alert-level : Low battery alarm level in percent + +Example: + cw2015@62 { + status = "okay"; + compatible = "cellwise,cw201x"; + reg = <0x62>; + cellwise,bat-config-info = < + 0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63 + 0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36 + 0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69 + 0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59 + 0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17 + 0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D + 0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB + 0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11 + >; + cellwise,monitor-interval = <5>; + cellwise,virtual-power; + cellwise,design-capacity = <9800>; + power-supplies = <&mains_charger>, <&usb_charger>; + }