From patchwork Tue Nov 26 09:19:39 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 1200901 X-Patchwork-Delegate: lorenzo.pieralisi@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=suse.de Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 47MdgQ65dcz9sRC for ; Tue, 26 Nov 2019 20:21:06 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727667AbfKZJVA (ORCPT ); Tue, 26 Nov 2019 04:21:00 -0500 Received: from mx2.suse.de ([195.135.220.15]:47978 "EHLO mx1.suse.de" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1727577AbfKZJUn (ORCPT ); Tue, 26 Nov 2019 04:20:43 -0500 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx1.suse.de (Postfix) with ESMTP id 4E304BA6C; Tue, 26 Nov 2019 09:20:38 +0000 (UTC) From: Nicolas Saenz Julienne To: andrew.murray@arm.com, maz@kernel.org, linux-kernel@vger.kernel.org, Lorenzo Pieralisi , Hanjun Guo , Sudeep Holla , Tariq Toukan , Rob Herring , Frank Rowand , Shawn Lin , Heiko Stuebner , Christoph Hellwig , Marek Szyprowski , Robin Murphy Cc: james.quinlan@broadcom.com, mbrugger@suse.com, f.fainelli@gmail.com, phil@raspberrypi.org, wahrenst@gmx.net, jeremy.linton@arm.com, linux-pci@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, Nicolas Saenz Julienne , "Rafael J. Wysocki" , Len Brown , "David S. Miller" , Bjorn Helgaas , linux-acpi@vger.kernel.org, linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org, linux-rdma@vger.kernel.org, devicetree@vger.kernel.org, linux-rockchip@lists.infradead.org, iommu@lists.linux-foundation.org Subject: [PATCH v3 1/7] linux/log2.h: Add roundup/rounddown_pow_two64() family of functions Date: Tue, 26 Nov 2019 10:19:39 +0100 Message-Id: <20191126091946.7970-2-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.24.0 In-Reply-To: <20191126091946.7970-1-nsaenzjulienne@suse.de> References: <20191126091946.7970-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Some users need to make sure their rounding function accepts and returns 64bit long variables regardless of the architecture. Sadly roundup/rounddown_pow_two() takes and returns unsigned longs. Create a new generic 64bit variant of the function and cleanup rougue custom implementations. Signed-off-by: Nicolas Saenz Julienne --- Changes since v2: - Use u64 - Rename function to roundup/down_pow_two_u64() - Use 1ULL instead of 1UL - Include function usage in of/device.c and acpi/arm64/iort.c drivers/acpi/arm64/iort.c | 2 +- drivers/net/ethernet/mellanox/mlx4/en_clock.c | 3 +- drivers/of/device.c | 2 +- .../pci/controller/cadence/pcie-cadence-ep.c | 7 +-- drivers/pci/controller/cadence/pcie-cadence.c | 7 +-- drivers/pci/controller/pcie-rockchip-ep.c | 9 ++-- include/linux/log2.h | 52 +++++++++++++++++++ kernel/dma/direct.c | 3 +- 8 files changed, 65 insertions(+), 20 deletions(-) diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c index 33f71983e001..4809d3757d71 100644 --- a/drivers/acpi/arm64/iort.c +++ b/drivers/acpi/arm64/iort.c @@ -1090,7 +1090,7 @@ void iort_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size) * firmware. */ end = dmaaddr + size - 1; - mask = DMA_BIT_MASK(ilog2(end) + 1); + mask = roundup_pow_of_two_u64(end) - 1; dev->bus_dma_limit = end; dev->coherent_dma_mask = mask; *dev->dma_mask = mask; diff --git a/drivers/net/ethernet/mellanox/mlx4/en_clock.c b/drivers/net/ethernet/mellanox/mlx4/en_clock.c index 024788549c25..ba5368e221f3 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_clock.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_clock.c @@ -33,6 +33,7 @@ #include #include +#include #include "mlx4_en.h" @@ -252,7 +253,7 @@ static u32 freq_to_shift(u16 freq) { u32 freq_khz = freq * 1000; u64 max_val_cycles = freq_khz * 1000 * MLX4_EN_WRAP_AROUND_SEC; - u64 max_val_cycles_rounded = 1ULL << fls64(max_val_cycles - 1); + u64 max_val_cycles_rounded = roundup_pow_of_two_u64(max_val_cycles); /* calculate max possible multiplier in order to fit in 64bit */ u64 max_mul = div64_u64(ULLONG_MAX, max_val_cycles_rounded); diff --git a/drivers/of/device.c b/drivers/of/device.c index e9127db7b067..418d7d014af1 100644 --- a/drivers/of/device.c +++ b/drivers/of/device.c @@ -149,7 +149,7 @@ int of_dma_configure(struct device *dev, struct device_node *np, bool force_dma) * set by the driver. */ end = dma_addr + size - 1; - mask = DMA_BIT_MASK(ilog2(end) + 1); + mask = roundup_pow_of_two_u64(end) - 1; dev->coherent_dma_mask &= mask; *dev->dma_mask &= mask; /* ...but only set bus limit if we found valid dma-ranges earlier */ diff --git a/drivers/pci/controller/cadence/pcie-cadence-ep.c b/drivers/pci/controller/cadence/pcie-cadence-ep.c index 1c173dad67d1..f6e37eb67c68 100644 --- a/drivers/pci/controller/cadence/pcie-cadence-ep.c +++ b/drivers/pci/controller/cadence/pcie-cadence-ep.c @@ -10,6 +10,7 @@ #include #include #include +#include #include "pcie-cadence.h" @@ -61,11 +62,7 @@ static int cdns_pcie_ep_set_bar(struct pci_epc *epc, u8 fn, /* BAR size is 2^(aperture + 7) */ sz = max_t(size_t, epf_bar->size, CDNS_PCIE_EP_MIN_APERTURE); - /* - * roundup_pow_of_two() returns an unsigned long, which is not suited - * for 64bit values. - */ - sz = 1ULL << fls64(sz - 1); + sz = roundup_pow_of_two_u64(sz); aperture = ilog2(sz) - 7; /* 128B -> 0, 256B -> 1, 512B -> 2, ... */ if ((flags & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) { diff --git a/drivers/pci/controller/cadence/pcie-cadence.c b/drivers/pci/controller/cadence/pcie-cadence.c index cd795f6fc1e2..2ddda5ac60c4 100644 --- a/drivers/pci/controller/cadence/pcie-cadence.c +++ b/drivers/pci/controller/cadence/pcie-cadence.c @@ -4,6 +4,7 @@ // Author: Cyrille Pitchen #include +#include #include "pcie-cadence.h" @@ -11,11 +12,7 @@ void cdns_pcie_set_outbound_region(struct cdns_pcie *pcie, u8 fn, u32 r, bool is_io, u64 cpu_addr, u64 pci_addr, size_t size) { - /* - * roundup_pow_of_two() returns an unsigned long, which is not suited - * for 64bit values. - */ - u64 sz = 1ULL << fls64(size - 1); + u64 sz = roundup_pow_of_two_u64(size); int nbits = ilog2(sz); u32 addr0, addr1, desc0, desc1; diff --git a/drivers/pci/controller/pcie-rockchip-ep.c b/drivers/pci/controller/pcie-rockchip-ep.c index d743b0a48988..343f9683b540 100644 --- a/drivers/pci/controller/pcie-rockchip-ep.c +++ b/drivers/pci/controller/pcie-rockchip-ep.c @@ -16,6 +16,7 @@ #include #include #include +#include #include "pcie-rockchip.h" @@ -70,7 +71,7 @@ static void rockchip_pcie_prog_ep_ob_atu(struct rockchip_pcie *rockchip, u8 fn, u32 r, u32 type, u64 cpu_addr, u64 pci_addr, size_t size) { - u64 sz = 1ULL << fls64(size - 1); + u64 sz = roundup_pow_of_two_u64(size); int num_pass_bits = ilog2(sz); u32 addr0, addr1, desc0, desc1; bool is_nor_msg = (type == AXI_WRAPPER_NOR_MSG); @@ -172,11 +173,7 @@ static int rockchip_pcie_ep_set_bar(struct pci_epc *epc, u8 fn, /* BAR size is 2^(aperture + 7) */ sz = max_t(size_t, epf_bar->size, MIN_EP_APERTURE); - /* - * roundup_pow_of_two() returns an unsigned long, which is not suited - * for 64bit values. - */ - sz = 1ULL << fls64(sz - 1); + sz = roundup_pow_of_two_u64(sz); aperture = ilog2(sz) - 7; /* 128B -> 0, 256B -> 1, 512B -> 2, ... */ if ((flags & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) { diff --git a/include/linux/log2.h b/include/linux/log2.h index 83a4a3ca3e8a..0db47b78faa2 100644 --- a/include/linux/log2.h +++ b/include/linux/log2.h @@ -67,6 +67,24 @@ unsigned long __rounddown_pow_of_two(unsigned long n) return 1UL << (fls_long(n) - 1); } +/** + * __roundup_pow_of_two_u64() - round 64bit value up to nearest power of two + * @n: value to round up + */ +static inline __attribute__((const)) u64 __roundup_pow_of_two_u64(u64 n) +{ + return 1ULL << fls64(n - 1); +} + +/** + * __rounddown_pow_of_two_u64() - round 64bit value down to nearest power of two + * @n: value to round down + */ +static inline __attribute__((const)) u64 __rounddown_pow_of_two_u64(u64 n) +{ + return 1ULL << (fls64(n) - 1); +} + /** * const_ilog2 - log base 2 of 32-bit or a 64-bit constant unsigned value * @n: parameter @@ -194,6 +212,40 @@ unsigned long __rounddown_pow_of_two(unsigned long n) __rounddown_pow_of_two(n) \ ) +/** + * roundup_pow_of_two_u64 - round the given 64bit value up to nearest power of + * two + * @n: parameter + * + * round the given value up to the nearest power of two + * - the result is undefined when n == 0 + * - this can be used to initialise global variables from constant data + */ +#define roundup_pow_of_two_u64(n) \ +( \ + __builtin_constant_p(n) ? ( \ + (n == 1) ? 1 : \ + (1UL << (ilog2((n) - 1) + 1)) \ + ) : \ + __roundup_pow_of_two_u64(n) \ +) + +/** + * rounddown_pow_of_two_u64 - round the given 64bit value down to nearest power + * of two + * @n: parameter + * + * round the given value down to the nearest power of two + * - the result is undefined when n == 0 + * - this can be used to initialise global variables from constant data + */ +#define rounddown_pow_of_two_u64(n) \ +( \ + __builtin_constant_p(n) ? ( \ + (1UL << ilog2(n))) : \ + __rounddown_pow_of_two_u64(n) \ +) + static inline __attribute_const__ int __order_base_2(unsigned long n) { diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c index 6af7ae83c4ad..8dd59e51b4dc 100644 --- a/kernel/dma/direct.c +++ b/kernel/dma/direct.c @@ -15,6 +15,7 @@ #include #include #include +#include /* * Most architectures use ZONE_DMA for the first 16 Megabytes, but some use it @@ -53,7 +54,7 @@ u64 dma_direct_get_required_mask(struct device *dev) { u64 max_dma = phys_to_dma_direct(dev, (max_pfn - 1) << PAGE_SHIFT); - return (1ULL << (fls64(max_dma) - 1)) * 2 - 1; + return rounddown_pow_of_two_u64(max_dma) * 2 - 1; } static gfp_t __dma_direct_optimal_gfp_mask(struct device *dev, u64 dma_mask, From patchwork Tue Nov 26 09:19:40 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 1200904 X-Patchwork-Delegate: lorenzo.pieralisi@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=suse.de Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 47MdgV6srsz9sR7 for ; Tue, 26 Nov 2019 20:21:10 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727580AbfKZJUk (ORCPT ); Tue, 26 Nov 2019 04:20:40 -0500 Received: from mx2.suse.de ([195.135.220.15]:47902 "EHLO mx1.suse.de" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1727397AbfKZJUj (ORCPT ); Tue, 26 Nov 2019 04:20:39 -0500 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx1.suse.de (Postfix) with ESMTP id 2070ABA56; Tue, 26 Nov 2019 09:20:36 +0000 (UTC) From: Nicolas Saenz Julienne To: andrew.murray@arm.com, maz@kernel.org, linux-kernel@vger.kernel.org, Florian Fainelli , bcm-kernel-feedback-list@broadcom.com, Eric Anholt , Stefan Wahren , Bjorn Helgaas Cc: james.quinlan@broadcom.com, mbrugger@suse.com, phil@raspberrypi.org, jeremy.linton@arm.com, linux-pci@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, Nicolas Saenz Julienne , Rob Herring , Mark Rutland , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org Subject: [PATCH v3 2/7] dt-bindings: PCI: Add bindings for brcmstb's PCIe device Date: Tue, 26 Nov 2019 10:19:40 +0100 Message-Id: <20191126091946.7970-3-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.24.0 In-Reply-To: <20191126091946.7970-1-nsaenzjulienne@suse.de> References: <20191126091946.7970-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org From: Jim Quinlan The DT bindings description of the brcmstb PCIe device is described. This node can only be used for now on the Raspberry Pi 4. Signed-off-by: Jim Quinlan Co-developed-by: Nicolas Saenz Julienne Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Rob Herring --- Changes since v2: - Add pci reference schema - Drop all default properties - Assume msi-controller and msi-parent are properly defined - Add num entries on multiple properties - use unevaluatedProperties - Update required properties - Fix license Changes since v1: - Fix commit Subject - Remove linux,pci-domain This was based on Jim's original submission[1], converted to yaml and adapted to the RPi4 case. [1] https://patchwork.kernel.org/patch/10605937/ .../bindings/pci/brcm,stb-pcie.yaml | 97 +++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml new file mode 100644 index 000000000000..77d3e81a437b --- /dev/null +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Brcmstb PCIe Host Controller Device Tree Bindings + +maintainers: + - Nicolas Saenz Julienne + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: brcm,bcm2711-pcie # The Raspberry Pi 4 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + items: + - description: PCIe host controller + - description: builtin MSI controller + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + - const: pcie + - const: msi + + ranges: + maxItems: 1 + + dma-ranges: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: sw_pcie + + msi-controller: + description: Identifies the node as an MSI controller. + + msi-parent: + description: MSI controller the device is capable of using. + + brcm,enable-ssc: + description: Indicates usage of spread-spectrum clocking. + type: boolean + +required: + - reg + - dma-ranges + - "#interrupt-cells" + - interrupts + - interrupt-names + - interrupt-map-mask + - interrupt-map + - msi-controller + +unevaluatedProperties: false + +examples: + - | + #include + #include + + scb { + #address-cells = <2>; + #size-cells = <1>; + pcie0: pcie@7d500000 { + compatible = "brcm,bcm2711-pcie"; + reg = <0x0 0x7d500000 0x9310>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupts = , + ; + interrupt-names = "pcie", "msi"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + msi-parent = <&pcie0>; + msi-controller; + ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>; + dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>; + brcm,enable-ssc; + }; + }; From patchwork Tue Nov 26 09:19:41 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 1200894 X-Patchwork-Delegate: lorenzo.pieralisi@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=suse.de Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 47Mdfz0HQdz9sR5 for ; Tue, 26 Nov 2019 20:20:43 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727585AbfKZJUk (ORCPT ); Tue, 26 Nov 2019 04:20:40 -0500 Received: from mx2.suse.de ([195.135.220.15]:47934 "EHLO mx1.suse.de" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1727150AbfKZJUk (ORCPT ); Tue, 26 Nov 2019 04:20:40 -0500 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx1.suse.de (Postfix) with ESMTP id 50643BAB1; Tue, 26 Nov 2019 09:20:38 +0000 (UTC) From: Nicolas Saenz Julienne To: andrew.murray@arm.com, maz@kernel.org, linux-kernel@vger.kernel.org, Rob Herring , Mark Rutland , Eric Anholt , Stefan Wahren Cc: james.quinlan@broadcom.com, mbrugger@suse.com, f.fainelli@gmail.com, phil@raspberrypi.org, jeremy.linton@arm.com, linux-pci@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, Nicolas Saenz Julienne , devicetree@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 3/7] ARM: dts: bcm2711: Enable PCIe controller Date: Tue, 26 Nov 2019 10:19:41 +0100 Message-Id: <20191126091946.7970-4-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.24.0 In-Reply-To: <20191126091946.7970-1-nsaenzjulienne@suse.de> References: <20191126091946.7970-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org This enables bcm2711's PCIe bus, which is hardwired to a VIA Technologies XHCI USB 3.0 controller. Signed-off-by: Nicolas Saenz Julienne --- This will likely need a rebase once the RPi GENET patches land. Changes since v2: - Remove unused interrupt-map - correct dma-ranges to it's full size, non power of 2 bus DMA constraints now supported in linux-next[1] - add device_type - rename alias from pcie_0 to pcie0 Changes since v1: - remove linux,pci-domain [1] https://lkml.org/lkml/2019/11/21/235 arch/arm/boot/dts/bcm2711.dtsi | 41 ++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index 667658497898..2e121fc8b3d0 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -288,6 +288,47 @@ IRQ_TYPE_LEVEL_LOW)>, arm,cpu-registers-not-fw-configured; }; + scb { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>, + <0x6 0x00000000 0x6 0x00000000 0x40000000>; + + pcie0: pcie@7d500000 { + compatible = "brcm,bcm2711-pcie"; + reg = <0x0 0x7d500000 0x9310>; + device_type = "pci"; + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + interrupts = , + ; + interrupt-names = "pcie", "msi"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 + IRQ_TYPE_LEVEL_HIGH>; + msi-controller; + msi-parent = <&pcie0>; + + ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 + 0x0 0x04000000>; + /* + * The wrapper around the PCIe block has a bug + * preventing it from accessing beyond the first 3GB of + * memory. As the bus DMA mask is rounded up to the + * closest power of two of the dma-range size, we're + * forced to set the limit at 2GB. This can be + * harmlessly changed in the future once the DMA code + * handles non power of two DMA limits. + */ + dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 + 0x0 0xc0000000>; + brcm,enable-ssc; + }; + }; + cpus: cpus { #address-cells = <1>; #size-cells = <0>; From patchwork Tue Nov 26 09:19:42 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 1200899 X-Patchwork-Delegate: lorenzo.pieralisi@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=suse.de Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 47MdgJ2Y9cz9sPZ for ; Tue, 26 Nov 2019 20:21:00 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727150AbfKZJUo (ORCPT ); Tue, 26 Nov 2019 04:20:44 -0500 Received: from mx2.suse.de ([195.135.220.15]:47934 "EHLO mx1.suse.de" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1727587AbfKZJUn (ORCPT ); Tue, 26 Nov 2019 04:20:43 -0500 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx1.suse.de (Postfix) with ESMTP id 59EF2BA60; Tue, 26 Nov 2019 09:20:40 +0000 (UTC) From: Nicolas Saenz Julienne To: andrew.murray@arm.com, maz@kernel.org, linux-kernel@vger.kernel.org, Lorenzo Pieralisi , Eric Anholt , Stefan Wahren , Florian Fainelli , bcm-kernel-feedback-list@broadcom.com Cc: james.quinlan@broadcom.com, mbrugger@suse.com, phil@raspberrypi.org, jeremy.linton@arm.com, linux-pci@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, Nicolas Saenz Julienne , Bjorn Helgaas , linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 4/7] PCI: brcmstb: add Broadcom STB PCIe host controller driver Date: Tue, 26 Nov 2019 10:19:42 +0100 Message-Id: <20191126091946.7970-5-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.24.0 In-Reply-To: <20191126091946.7970-1-nsaenzjulienne@suse.de> References: <20191126091946.7970-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org From: Jim Quinlan This adds a basic driver for Broadcom's STB PCIe controller, for now aimed at Raspberry Pi 4's SoC, bcm2711. Signed-off-by: Jim Quinlan Co-developed-by: Nicolas Saenz Julienne Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Andrew Murray Reviewed-by: Jeremy Linton --- Changes since v2: - Correct rc_bar2_offset sign - Invert IRQ clear and masking in setup code - Use bitfield.h, redo all register ops while keeping the register names intact - Remove all SHIFT register definitions - Get rid of all _RB writes - Get rid of of_data - Don't iterate over inexisting dma-ranges - Add comment regarding dma-ranges validation - Small cosmetic cleanups - Fix license mismatch - Set driver Kconfig tristate - Didn't add any comment about the controller not being I/O coherent for now as I wait for Jeremy's reply Changes since v1: - Fix Kconfig - Remove pci domain check - Remove all MSI related code - Remove supend/resume code - Simplify link state wait routine - Prefix all functions - Use of_device_get_match_data() - Use devm_clk_get_optional() - Get rid of irq variable - Use STB all over the driver - Simplify map_bus() function - Fix license mismatch - Remove unused register definitions - Small cleanups, spell errors This is based on Jim's original submission[1] but adapted and tailored specifically to bcm2711's needs (that's the Raspberry Pi 4). Support for the rest of the brcmstb family will soon follow once we get support for multiple dma-ranges in dma/direct. [1] https://patchwork.kernel.org/patch/10605959/ drivers/pci/controller/Kconfig | 8 + drivers/pci/controller/Makefile | 1 + drivers/pci/controller/pcie-brcmstb.c | 753 ++++++++++++++++++++++++++ 3 files changed, 762 insertions(+) create mode 100644 drivers/pci/controller/pcie-brcmstb.c diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index c77069c8ee5d..27504f108ee5 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -253,6 +253,14 @@ config VMD To compile this driver as a module, choose M here: the module will be called vmd. +config PCIE_BRCMSTB + tristate "Broadcom Brcmstb PCIe host controller" + depends on ARCH_BCM2835 || COMPILE_TEST + depends on OF + help + Say Y here to enable PCIe host controller support for + Broadcom STB based SoCs, like the Raspberry Pi 4. + config PCI_HYPERV_INTERFACE tristate "Hyper-V PCI Interface" depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64 diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile index 3d4f597f15ce..01b2502a5323 100644 --- a/drivers/pci/controller/Makefile +++ b/drivers/pci/controller/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o obj-$(CONFIG_VMD) += vmd.o +obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW obj-y += dwc/ diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c new file mode 100644 index 000000000000..28c1b9429d3d --- /dev/null +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -0,0 +1,753 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Copyright (C) 2009 - 2019 Broadcom */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../pci.h" + +/* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */ +#define BRCM_PCIE_CAP_REGS 0x00ac + +/* + * Broadcom STB PCIe Register Offsets. The names are from the chip's RDB and we + * use them here so that a script can correlate this code and the RDB to + * prevent discrepancies. + */ +#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1 0x0188 +#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK 0xc +#define PCIE_RC_CFG_VENDOR_SPCIFIC_REG1_LITTLE_ENDIAN 0x0 + +#define PCIE_RC_CFG_PRIV1_ID_VAL3 0x043c +#define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK 0xffffff + +#define PCIE_RC_DL_MDIO_ADDR 0x1100 +#define PCIE_RC_DL_MDIO_WR_DATA 0x1104 +#define PCIE_RC_DL_MDIO_RD_DATA 0x1108 + +#define PCIE_MISC_MISC_CTRL 0x4008 +#define PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK 0x1000 +#define PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK 0x2000 +#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK 0x300000 +#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_128 0x0 +#define PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK 0xf8000000 + +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO 0x400c +#define PCIE_MEM_WIN0_LO(win) \ + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO + ((win) * 4) + +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI 0x4010 +#define PCIE_MEM_WIN0_HI(win) \ + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + ((win) * 4) + +#define PCIE_MISC_RC_BAR1_CONFIG_LO 0x402c +#define PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK 0x1f + +#define PCIE_MISC_RC_BAR2_CONFIG_LO 0x4034 +#define PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK 0x1f +#define PCIE_MISC_RC_BAR2_CONFIG_HI 0x4038 + +#define PCIE_MISC_RC_BAR3_CONFIG_LO 0x403c +#define PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK 0x1f + +#define PCIE_MISC_PCIE_CTRL 0x4064 +#define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK 0x1 + +#define PCIE_MISC_PCIE_STATUS 0x4068 +#define PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK 0x80 +#define PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK 0x20 +#define PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK 0x10 +#define PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK 0x40 + +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT 0x4070 +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK 0xfff00000 +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK 0xfff0 +#define PCIE_MEM_WIN0_BASE_LIMIT(win) \ + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT + ((win) * 4) + +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI 0x4080 +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK 0xff +#define PCIE_MEM_WIN0_BASE_HI(win) \ + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI + ((win) * 8) + +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI 0x4084 +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK 0xff +#define PCIE_MEM_WIN0_LIMIT_HI(win) \ + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI + ((win) * 8) + +#define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204 +#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK 0x2 +#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x08000000 + +#define PCIE_MSI_INTR2_STATUS 0x4500 +#define PCIE_MSI_INTR2_CLR 0x4508 +#define PCIE_MSI_INTR2_MASK_SET 0x4510 +#define PCIE_MSI_INTR2_MASK_CLR 0x4514 + +#define PCIE_EXT_CFG_DATA 0x8000 + +#define PCIE_EXT_CFG_INDEX 0x9000 +#define PCIE_EXT_BUSNUM_SHIFT 20 +#define PCIE_EXT_SLOT_SHIFT 15 +#define PCIE_EXT_FUNC_SHIFT 12 + +#define PCIE_RGR1_SW_INIT_1 0x9210 +#define PCIE_RGR1_SW_INIT_1_PERST_MASK 0x1 +#define PCIE_RGR1_SW_INIT_1_INIT_MASK 0x2 + +/* PCIe parameters */ +#define BRCM_NUM_PCIE_OUT_WINS 0x4 + +/* MDIO registers */ +#define MDIO_PORT0 0x0 +#define MDIO_DATA_MASK 0x7fffffff +#define MDIO_PORT_MASK 0xf0000 +#define MDIO_REGAD_MASK 0xffff +#define MDIO_CMD_MASK 0xfff00000 +#define MDIO_CMD_READ 0x1 +#define MDIO_CMD_WRITE 0x0 +#define MDIO_DATA_DONE_MASK 0x80000000 +#define MDIO_RD_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 1 : 0) +#define MDIO_WT_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 0 : 1) +#define SSC_REGS_ADDR 0x1100 +#define SET_ADDR_OFFSET 0x1f +#define SSC_CNTL_OFFSET 0x2 +#define SSC_CNTL_OVRD_EN_MASK 0x8000 +#define SSC_CNTL_OVRD_VAL_MASK 0x4000 +#define SSC_STATUS_OFFSET 0x1 +#define SSC_STATUS_SSC_MASK 0x400 +#define SSC_STATUS_PLL_LOCK_MASK 0x800 + +/* Internal PCIe Host Controller Information.*/ +struct brcm_pcie { + struct device *dev; + void __iomem *base; + struct clk *clk; + struct pci_bus *root_bus; + struct device_node *np; + bool ssc; + int gen; +}; + +/* + * This is to convert the size of the inbound "BAR" region to the + * non-linear values of PCIE_X_MISC_RC_BAR[123]_CONFIG_LO.SIZE + */ +static int brcm_pcie_encode_ibar_size(u64 size) +{ + int log2_in = ilog2(size); + + if (log2_in >= 12 && log2_in <= 15) + /* Covers 4KB to 32KB (inclusive) */ + return (log2_in - 12) + 0x1c; + else if (log2_in >= 16 && log2_in <= 35) + /* Covers 64KB to 32GB, (inclusive) */ + return log2_in - 15; + /* Something is awry so disable */ + return 0; +} + +static u32 brcm_pcie_mdio_form_pkt(int port, int regad, int cmd) +{ + u32 pkt = 0; + + pkt |= FIELD_PREP(MDIO_PORT_MASK, port); + pkt |= FIELD_PREP(MDIO_REGAD_MASK, regad); + pkt |= FIELD_PREP(MDIO_CMD_MASK, cmd); + + return pkt; +} + +/* negative return value indicates error */ +static int brcm_pcie_mdio_read(void __iomem *base, u8 port, u8 regad, u32 *val) +{ + int tries; + u32 data; + + writel(brcm_pcie_mdio_form_pkt(port, regad, MDIO_CMD_READ), + base + PCIE_RC_DL_MDIO_ADDR); + readl(base + PCIE_RC_DL_MDIO_ADDR); + + data = readl(base + PCIE_RC_DL_MDIO_RD_DATA); + for (tries = 0; !MDIO_RD_DONE(data) && tries < 10; tries++) { + udelay(10); + data = readl(base + PCIE_RC_DL_MDIO_RD_DATA); + } + + *val = FIELD_GET(MDIO_DATA_MASK, data); + return MDIO_RD_DONE(data) ? 0 : -EIO; +} + +/* negative return value indicates error */ +static int brcm_pcie_mdio_write(void __iomem *base, u8 port, + u8 regad, u16 wrdata) +{ + int tries; + u32 data; + + writel(brcm_pcie_mdio_form_pkt(port, regad, MDIO_CMD_WRITE), + base + PCIE_RC_DL_MDIO_ADDR); + readl(base + PCIE_RC_DL_MDIO_ADDR); + writel(MDIO_DATA_DONE_MASK | wrdata, base + PCIE_RC_DL_MDIO_WR_DATA); + + data = readl(base + PCIE_RC_DL_MDIO_WR_DATA); + for (tries = 0; !MDIO_WT_DONE(data) && tries < 10; tries++) { + udelay(10); + data = readl(base + PCIE_RC_DL_MDIO_WR_DATA); + } + + return MDIO_WT_DONE(data) ? 0 : -EIO; +} + +/* + * Configures device for Spread Spectrum Clocking (SSC) mode; a negative + * return value indicates error. + */ +static int brcm_pcie_set_ssc(struct brcm_pcie *pcie) +{ + int pll, ssc; + int ret; + u32 tmp; + + ret = brcm_pcie_mdio_write(pcie->base, MDIO_PORT0, SET_ADDR_OFFSET, + SSC_REGS_ADDR); + if (ret < 0) + return ret; + + ret = brcm_pcie_mdio_read(pcie->base, MDIO_PORT0, + SSC_CNTL_OFFSET, &tmp); + if (ret < 0) + return ret; + + u32p_replace_bits(&tmp, 1, SSC_CNTL_OVRD_EN_MASK); + u32p_replace_bits(&tmp, 1, SSC_CNTL_OVRD_VAL_MASK); + ret = brcm_pcie_mdio_write(pcie->base, MDIO_PORT0, + SSC_CNTL_OFFSET, tmp); + if (ret < 0) + return ret; + + usleep_range(1000, 2000); + ret = brcm_pcie_mdio_read(pcie->base, MDIO_PORT0, + SSC_STATUS_OFFSET, &tmp); + if (ret < 0) + return ret; + + ssc = FIELD_GET(SSC_STATUS_SSC_MASK, tmp); + pll = FIELD_GET(SSC_STATUS_PLL_LOCK_MASK, tmp); + + return ssc && pll ? 0 : -EIO; +} + +/* Limits operation to a specific generation (1, 2, or 3) */ +static void brcm_pcie_set_gen(struct brcm_pcie *pcie, int gen) +{ + u16 lnkctl2 = readw(pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2); + u32 lnkcap = readl(pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP); + + lnkcap = (lnkcap & ~PCI_EXP_LNKCAP_SLS) | gen; + writel(lnkcap, pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP); + + lnkctl2 = (lnkctl2 & ~0xf) | gen; + writew(lnkctl2, pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2); +} + +static void brcm_pcie_set_outbound_win(struct brcm_pcie *pcie, + unsigned int win, u64 cpu_addr, + u64 pcie_addr, u64 size) +{ + u32 cpu_addr_mb_high, limit_addr_mb_high; + phys_addr_t cpu_addr_mb, limit_addr_mb; + int high_addr_shift; + u32 tmp; + + /* Set the base of the pcie_addr window */ + writel(lower_32_bits(pcie_addr), pcie->base + PCIE_MEM_WIN0_LO(win)); + writel(upper_32_bits(pcie_addr), pcie->base + PCIE_MEM_WIN0_HI(win)); + + /* Write the addr base & limit lower bits (in MBs) */ + cpu_addr_mb = cpu_addr / SZ_1M; + limit_addr_mb = (cpu_addr + size - 1) / SZ_1M; + + tmp = readl(pcie->base + PCIE_MEM_WIN0_BASE_LIMIT(win)); + u32p_replace_bits(&tmp, cpu_addr_mb, + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK); + u32p_replace_bits(&tmp, limit_addr_mb, + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK); + writel(tmp, pcie->base + PCIE_MEM_WIN0_BASE_LIMIT(win)); + + /* Write the cpu & limit addr upper bits */ + high_addr_shift = + HWEIGHT32(PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK); + + cpu_addr_mb_high = cpu_addr_mb >> high_addr_shift; + tmp = readl(pcie->base + PCIE_MEM_WIN0_BASE_HI(win)); + u32p_replace_bits(&tmp, cpu_addr_mb_high, + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK); + writel(tmp, pcie->base + PCIE_MEM_WIN0_BASE_HI(win)); + + limit_addr_mb_high = limit_addr_mb >> high_addr_shift; + tmp = readl(pcie->base + PCIE_MEM_WIN0_LIMIT_HI(win)); + u32p_replace_bits(&tmp, limit_addr_mb_high, + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK); + writel(tmp, pcie->base + PCIE_MEM_WIN0_LIMIT_HI(win)); +} + +/* The controller is capable of serving in both RC and EP roles */ +static bool brcm_pcie_rc_mode(struct brcm_pcie *pcie) +{ + void __iomem *base = pcie->base; + u32 val = readl(base + PCIE_MISC_PCIE_STATUS); + + return !!FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK, val); +} + +static bool brcm_pcie_link_up(struct brcm_pcie *pcie) +{ + u32 val = readl(pcie->base + PCIE_MISC_PCIE_STATUS); + u32 dla = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK, val); + u32 plu = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK, val); + + return dla && plu; +} + +/* Configuration space read/write support */ +static inline int brcm_pcie_cfg_index(int busnr, int devfn, int reg) +{ + return ((PCI_SLOT(devfn) & 0x1f) << PCIE_EXT_SLOT_SHIFT) + | ((PCI_FUNC(devfn) & 0x07) << PCIE_EXT_FUNC_SHIFT) + | (busnr << PCIE_EXT_BUSNUM_SHIFT) + | (reg & ~3); +} + +static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn, + int where) +{ + struct brcm_pcie *pcie = bus->sysdata; + void __iomem *base = pcie->base; + int idx; + + /* Accesses to the RC go right to the RC registers if slot==0 */ + if (pci_is_root_bus(bus)) + return PCI_SLOT(devfn) ? NULL : base + where; + + /* For devices, write to the config space index register */ + idx = brcm_pcie_cfg_index(bus->number, devfn, 0); + writel(idx, pcie->base + PCIE_EXT_CFG_INDEX); + return base + PCIE_EXT_CFG_DATA + where; +} + +static struct pci_ops brcm_pcie_ops = { + .map_bus = brcm_pcie_map_conf, + .read = pci_generic_config_read, + .write = pci_generic_config_write, +}; + +static inline void brcm_pcie_bridge_sw_init_set(struct brcm_pcie *pcie, u32 val) +{ + u32 tmp; + + tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1); + u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_INIT_MASK); + writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1); +} + +static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie, u32 val) +{ + u32 tmp; + + tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1); + u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_PERST_MASK); + writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1); +} + +static inline int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie, + u64 *rc_bar2_size, + u64 *rc_bar2_offset) +{ + struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); + struct device *dev = pcie->dev; + struct resource_entry *entry; + + entry = resource_list_first_type(&bridge->dma_ranges, IORESOURCE_MEM); + if (!entry) + return -ENODEV; + + *rc_bar2_offset = -entry->offset; + *rc_bar2_size = roundup_pow_of_two_u64(entry->res->end - + entry->res->start + 1); + + /* + * We validate the inbound memory view even though we should trust + * whatever the device-tree provides. This is because of an HW issue on + * early Raspberry Pi 4's revisions (bcm2711). It turns out its + * firmware has to dynamically edit dma-ranges due to a bug on the + * PCIe controller integration, which prohibits any access above the + * lower 3GB of memory. Given this, we decided to keep the dma-ranges + * in check, avoiding hard to debug device-tree related issues in the + * future: + * + * The PCIe host controller by design must set the inbound viewport to + * be a contiguous arrangement of all of the system's memory. In + * addition, its size mut be a power of two. To further complicate + * matters, the viewport must start on a pcie-address that is aligned + * on a multiple of its size. If a portion of the viewport does not + * represent system memory -- e.g. 3GB of memory requires a 4GB + * viewport -- we can map the outbound memory in or after 3GB and even + * though the viewport will overlap the outbound memory the controller + * will know to send outbound memory downstream and everything else + * upstream. + * + * For example: + * + * - The best-case scenario, memory up to 3GB, is to place the inbound + * region in the first 4GB of pcie-space, as some legacy devices can + * only address 32bits. We would also like to put the MSI under 4GB + * as well, since some devices require a 32bit MSI target address. + * + * - If the system memory is 4GB or larger we cannot start the inbound + * region at location 0 (since we have to allow some space for + * outbound memory @ 3GB). So instead it will start at the 1x + * multiple of its size + */ + if (!*rc_bar2_size || *rc_bar2_offset % *rc_bar2_size || + (*rc_bar2_offset < SZ_4G && *rc_bar2_offset > SZ_2G)) { + dev_err(dev, "Invalid rc_bar2_offset/size: size 0x%llx, off 0x%llx\n", + *rc_bar2_size, *rc_bar2_offset); + return -EINVAL; + } + + return 0; +} + +static int brcm_pcie_setup(struct brcm_pcie *pcie) +{ + struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); + u64 rc_bar2_offset, rc_bar2_size; + void __iomem *base = pcie->base; + struct device *dev = pcie->dev; + struct resource_entry *entry; + unsigned int scb_size_val; + bool ssc_good = false; + struct resource *res; + int num_out_wins = 0; + u16 nlw, cls, lnksta; + int i, ret; + u32 tmp; + + /* Reset the bridge */ + brcm_pcie_bridge_sw_init_set(pcie, 1); + + usleep_range(100, 200); + + /* Take the bridge out of reset */ + brcm_pcie_bridge_sw_init_set(pcie, 0); + + tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); + tmp &= ~PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK; + writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); + /* Wait for SerDes to be stable */ + usleep_range(100, 200); + + /* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN */ + u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK); + u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK); + u32p_replace_bits(&tmp, PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_128, + PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK); + writel(tmp, base + PCIE_MISC_MISC_CTRL); + + ret = brcm_pcie_get_rc_bar2_size_and_offset(pcie, &rc_bar2_size, + &rc_bar2_offset); + if (ret) + return ret; + + tmp = lower_32_bits(rc_bar2_offset); + u32p_replace_bits(&tmp, brcm_pcie_encode_ibar_size(rc_bar2_size), + PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK); + writel(tmp, base + PCIE_MISC_RC_BAR2_CONFIG_LO); + writel(upper_32_bits(rc_bar2_offset), + base + PCIE_MISC_RC_BAR2_CONFIG_HI); + + scb_size_val = rc_bar2_size ? + ilog2(rc_bar2_size) - 15 : 0xf; /* 0xf is 1GB */ + tmp = readl(base + PCIE_MISC_MISC_CTRL); + u32p_replace_bits(&tmp, scb_size_val, + PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK); + writel(tmp, base + PCIE_MISC_MISC_CTRL); + + /* disable the PCIe->GISB memory window (RC_BAR1) */ + tmp = readl(base + PCIE_MISC_RC_BAR1_CONFIG_LO); + tmp &= ~PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK; + writel(tmp, base + PCIE_MISC_RC_BAR1_CONFIG_LO); + + /* disable the PCIe->SCB memory window (RC_BAR3) */ + tmp = readl(base + PCIE_MISC_RC_BAR3_CONFIG_LO); + tmp &= ~PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK; + writel(tmp, base + PCIE_MISC_RC_BAR3_CONFIG_LO); + + /* Mask all interrupts since we are not handling any yet */ + writel(0xffffffff, pcie->base + PCIE_MSI_INTR2_MASK_SET); + + /* clear any interrupts we find on boot */ + writel(0xffffffff, pcie->base + PCIE_MSI_INTR2_CLR); + + if (pcie->gen) + brcm_pcie_set_gen(pcie, pcie->gen); + + /* Unassert the fundamental reset */ + brcm_pcie_perst_set(pcie, 0); + + /* + * Give the RC/EP time to wake up, before trying to configure RC. + * Intermittently check status for link-up, up to a total of 100ms. + */ + for (i = 0; i < 100 && !brcm_pcie_link_up(pcie); i += 5) + msleep(5); + + if (!brcm_pcie_link_up(pcie)) { + dev_err(dev, "link down\n"); + return -ENODEV; + } + + if (!brcm_pcie_rc_mode(pcie)) { + dev_err(dev, "PCIe misconfigured; is in EP mode\n"); + return -EINVAL; + } + + resource_list_for_each_entry(entry, &bridge->windows) { + res = entry->res; + + if (resource_type(res) != IORESOURCE_MEM) + continue; + + if (num_out_wins >= BRCM_NUM_PCIE_OUT_WINS) { + dev_err(pcie->dev, "too many outbound wins\n"); + return -EINVAL; + } + + brcm_pcie_set_outbound_win(pcie, num_out_wins, res->start, + res->start - entry->offset, + res->end - res->start + 1); + num_out_wins++; + } + + /* + * For config space accesses on the RC, show the right class for + * a PCIe-PCIe bridge (the default setting is to be EP mode). + */ + tmp = readl(base + PCIE_RC_CFG_PRIV1_ID_VAL3); + u32p_replace_bits(&tmp, 0x060400, + PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK); + writel(tmp, base + PCIE_RC_CFG_PRIV1_ID_VAL3); + + if (pcie->ssc) { + ret = brcm_pcie_set_ssc(pcie); + if (ret == 0) + ssc_good = true; + else + dev_err(dev, "failed attempt to enter ssc mode\n"); + } + + lnksta = readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKSTA); + cls = FIELD_GET(PCI_EXP_LNKSTA_CLS, lnksta); + nlw = FIELD_GET(PCI_EXP_LNKSTA_NLW, lnksta); + dev_info(dev, "link up, %s x%u %s\n", + PCIE_SPEED2STR(cls + PCI_SPEED_133MHz_PCIX_533), + nlw, ssc_good ? "(SSC)" : "(!SSC)"); + + /* PCIe->SCB endian mode for BAR */ + tmp = readl(base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1); + u32p_replace_bits(&tmp, PCIE_RC_CFG_VENDOR_SPCIFIC_REG1_LITTLE_ENDIAN, + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK); + writel(tmp, base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1); + + /* + * Refclk from RC should be gated with CLKREQ# input when ASPM L0s,L1 + * is enabled => setting the CLKREQ_DEBUG_ENABLE field to 1. + */ + tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); + tmp |= PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK; + writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); + + return 0; +} + +/* L23 is a low-power PCIe link state */ +static void brcm_pcie_enter_l23(struct brcm_pcie *pcie) +{ + void __iomem *base = pcie->base; + int l23, i; + u32 tmp; + + /* Assert request for L23 */ + tmp = readl(base + PCIE_MISC_PCIE_CTRL); + u32p_replace_bits(&tmp, 1, PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK); + writel(tmp, base + PCIE_MISC_PCIE_CTRL); + + /* Wait up to 36 msec for L23 */ + tmp = readl(base + PCIE_MISC_PCIE_STATUS); + l23 = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK, tmp); + for (i = 0; i < 15 && !l23; i++) { + usleep_range(2000, 2400); + tmp = readl(base + PCIE_MISC_PCIE_STATUS); + l23 = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK, + tmp); + } + + if (!l23) + dev_err(pcie->dev, "failed to enter low-power link state\n"); +} + +static void brcm_pcie_turn_off(struct brcm_pcie *pcie) +{ + void __iomem *base = pcie->base; + int tmp; + + if (brcm_pcie_link_up(pcie)) + brcm_pcie_enter_l23(pcie); + /* Assert fundamental reset */ + brcm_pcie_perst_set(pcie, 1); + + /* Deassert request for L23 in case it was asserted */ + tmp = readl(base + PCIE_MISC_PCIE_CTRL); + u32p_replace_bits(&tmp, 0, PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK); + writel(tmp, base + PCIE_MISC_PCIE_CTRL); + + /* Turn off SerDes */ + tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); + u32p_replace_bits(&tmp, 1, PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK); + writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); + + /* Shutdown PCIe bridge */ + brcm_pcie_bridge_sw_init_set(pcie, 1); +} + +static void __brcm_pcie_remove(struct brcm_pcie *pcie) +{ + brcm_pcie_turn_off(pcie); + clk_disable_unprepare(pcie->clk); + clk_put(pcie->clk); +} + +static int brcm_pcie_remove(struct platform_device *pdev) +{ + struct brcm_pcie *pcie = platform_get_drvdata(pdev); + + pci_stop_root_bus(pcie->root_bus); + pci_remove_root_bus(pcie->root_bus); + __brcm_pcie_remove(pcie); + + return 0; +} + +static int brcm_pcie_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct pci_host_bridge *bridge; + struct brcm_pcie *pcie; + struct pci_bus *child; + struct resource *res; + int ret; + + bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie)); + if (!bridge) + return -ENOMEM; + + pcie = pci_host_bridge_priv(bridge); + pcie->dev = &pdev->dev; + pcie->np = np; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pcie->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(pcie->base)) + return PTR_ERR(pcie->base); + + pcie->clk = devm_clk_get_optional(&pdev->dev, "sw_pcie"); + if (IS_ERR(pcie->clk)) + return PTR_ERR(pcie->clk); + + ret = of_pci_get_max_link_speed(np); + pcie->gen = (ret < 0) ? 0 : ret; + + pcie->ssc = of_property_read_bool(np, "brcm,enable-ssc"); + + ret = pci_parse_request_of_pci_ranges(pcie->dev, &bridge->windows, + &bridge->dma_ranges, NULL); + if (ret) + return ret; + + ret = clk_prepare_enable(pcie->clk); + if (ret) { + dev_err(&pdev->dev, "could not enable clock\n"); + return ret; + } + + ret = brcm_pcie_setup(pcie); + if (ret) + goto fail; + + bridge->dev.parent = &pdev->dev; + bridge->busnr = 0; + bridge->ops = &brcm_pcie_ops; + bridge->sysdata = pcie; + bridge->map_irq = of_irq_parse_and_map_pci; + bridge->swizzle_irq = pci_common_swizzle; + + ret = pci_scan_root_bus_bridge(bridge); + if (ret < 0) { + dev_err(pcie->dev, "Scanning root bridge failed\n"); + goto fail; + } + + pci_assign_unassigned_bus_resources(bridge->bus); + list_for_each_entry(child, &bridge->bus->children, node) + pcie_bus_configure_settings(child); + pci_bus_add_devices(bridge->bus); + platform_set_drvdata(pdev, pcie); + pcie->root_bus = bridge->bus; + + return 0; +fail: + __brcm_pcie_remove(pcie); + return ret; +} + +static const struct of_device_id brcm_pcie_match[] = { + { .compatible = "brcm,bcm2711-pcie" }, + {}, +}; +MODULE_DEVICE_TABLE(of, brcm_pcie_match); + +static struct platform_driver brcm_pcie_driver = { + .probe = brcm_pcie_probe, + .remove = brcm_pcie_remove, + .driver = { + .name = "brcm-pcie", + .of_match_table = brcm_pcie_match, + }, +}; +module_platform_driver(brcm_pcie_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Broadcom STB PCIe RC driver"); +MODULE_AUTHOR("Broadcom"); From patchwork Tue Nov 26 09:19:43 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 1200896 X-Patchwork-Delegate: lorenzo.pieralisi@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=suse.de Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 47MdgB68Gzz9sPZ for ; Tue, 26 Nov 2019 20:20:54 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727630AbfKZJUq (ORCPT ); Tue, 26 Nov 2019 04:20:46 -0500 Received: from mx2.suse.de ([195.135.220.15]:48044 "EHLO mx1.suse.de" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1727600AbfKZJUq (ORCPT ); Tue, 26 Nov 2019 04:20:46 -0500 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx1.suse.de (Postfix) with ESMTP id 506DDBA56; Tue, 26 Nov 2019 09:20:42 +0000 (UTC) From: Nicolas Saenz Julienne To: andrew.murray@arm.com, maz@kernel.org, linux-kernel@vger.kernel.org, Lorenzo Pieralisi , Eric Anholt , Stefan Wahren , Florian Fainelli , bcm-kernel-feedback-list@broadcom.com Cc: james.quinlan@broadcom.com, mbrugger@suse.com, phil@raspberrypi.org, jeremy.linton@arm.com, linux-pci@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, Nicolas Saenz Julienne , Bjorn Helgaas , linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 5/7] PCI: brcmstb: add MSI capability Date: Tue, 26 Nov 2019 10:19:43 +0100 Message-Id: <20191126091946.7970-6-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.24.0 In-Reply-To: <20191126091946.7970-1-nsaenzjulienne@suse.de> References: <20191126091946.7970-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org From: Jim Quinlan This adds MSI support to the Broadcom STB PCIe host controller. The MSI controller is physically located within the PCIe block, however, there is no reason why the MSI controller could not be moved elsewhere in the future. MSIX is not supported by the HW. Since the internal Brcmstb MSI controller is intertwined with the PCIe controller, it is not its own platform device but rather part of the PCIe platform device. Signed-off-by: Jim Quinlan Co-developed-by: Nicolas Saenz Julienne Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Marc Zyngier Reviewed-by: Andrew Murray --- Changes since v2 (kept Marc's Reviewed-by as changes didn't affect irq subsystem stuff or seem petty enough): - Use standard APIs on register operations - Get rid of revision code - Update rules to msi_target_addr selection - Remove unwarranted MSI_FLAG_PCI_MSIX - Small cosmetic changes Changes since v1: - Move revision code and some registers to this patch - Use PCIE_MSI_IRQ_DOMAIN in Kconfig - Remove redundant register read from ISR - Fail probe on MSI init error - Get rid of msi_internal - Use bitmap family of functions - Use edge triggered setup - Add comment regarding MultiMSI - Simplify compose_msi_msg to avoid reg read This is based on Jim's original submission[1] with some slight changes regarding how pcie->msi_target_addr is decided. [1] https://patchwork.kernel.org/patch/10605955/ drivers/pci/controller/Kconfig | 1 + drivers/pci/controller/pcie-brcmstb.c | 261 +++++++++++++++++++++++++- 2 files changed, 261 insertions(+), 1 deletion(-) diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index 27504f108ee5..918e283bbff1 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -257,6 +257,7 @@ config PCIE_BRCMSTB tristate "Broadcom Brcmstb PCIe host controller" depends on ARCH_BCM2835 || COMPILE_TEST depends on OF + depends on PCI_MSI_IRQ_DOMAIN help Say Y here to enable PCIe host controller support for Broadcom STB based SoCs, like the Raspberry Pi 4. diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index 28c1b9429d3d..eaf0119c08bf 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -2,6 +2,7 @@ /* Copyright (C) 2009 - 2019 Broadcom */ #include +#include #include #include #include @@ -9,11 +10,13 @@ #include #include #include +#include #include #include #include #include #include +#include #include #include #include @@ -71,6 +74,12 @@ #define PCIE_MISC_RC_BAR3_CONFIG_LO 0x403c #define PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK 0x1f +#define PCIE_MISC_MSI_BAR_CONFIG_LO 0x4044 +#define PCIE_MISC_MSI_BAR_CONFIG_HI 0x4048 + +#define PCIE_MISC_MSI_DATA_CONFIG 0x404c +#define PCIE_MISC_MSI_DATA_CONFIG_VAL 0xffe06540 + #define PCIE_MISC_PCIE_CTRL 0x4064 #define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK 0x1 @@ -118,6 +127,11 @@ /* PCIe parameters */ #define BRCM_NUM_PCIE_OUT_WINS 0x4 +#define BRCM_INT_PCI_MSI_NR 32 + +/* MSI target adresses */ +#define BRCM_MSI_TARGET_ADDR_LT_4GB 0x0fffffffcULL +#define BRCM_MSI_TARGET_ADDR_GT_4GB 0xffffffffcULL /* MDIO registers */ #define MDIO_PORT0 0x0 @@ -139,6 +153,19 @@ #define SSC_STATUS_SSC_MASK 0x400 #define SSC_STATUS_PLL_LOCK_MASK 0x800 +struct brcm_msi { + struct device *dev; + void __iomem *base; + struct device_node *np; + struct irq_domain *msi_domain; + struct irq_domain *inner_domain; + struct mutex lock; /* guards the alloc/free operations */ + u64 target_addr; + int irq; + /* used indicates which MSI interrupts have been alloc'd */ + unsigned long used; +}; + /* Internal PCIe Host Controller Information.*/ struct brcm_pcie { struct device *dev; @@ -148,6 +175,8 @@ struct brcm_pcie { struct device_node *np; bool ssc; int gen; + u64 msi_target_addr; + struct brcm_msi *msi; }; /* @@ -313,6 +342,214 @@ static void brcm_pcie_set_outbound_win(struct brcm_pcie *pcie, writel(tmp, pcie->base + PCIE_MEM_WIN0_LIMIT_HI(win)); } +static struct irq_chip brcm_msi_irq_chip = { + .name = "BRCM STB PCIe MSI", + .irq_ack = irq_chip_ack_parent, + .irq_mask = pci_msi_mask_irq, + .irq_unmask = pci_msi_unmask_irq, +}; + +static struct msi_domain_info brcm_msi_domain_info = { + /* Multi MSI is supported by the controller, but not by this driver */ + .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS), + .chip = &brcm_msi_irq_chip, +}; + +static void brcm_pcie_msi_isr(struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + unsigned long status, virq; + struct brcm_msi *msi; + struct device *dev; + u32 bit; + + chained_irq_enter(chip, desc); + msi = irq_desc_get_handler_data(desc); + dev = msi->dev; + + status = readl(msi->base + PCIE_MSI_INTR2_STATUS); + for_each_set_bit(bit, &status, BRCM_INT_PCI_MSI_NR) { + virq = irq_find_mapping(msi->inner_domain, bit); + if (virq) + generic_handle_irq(virq); + else + dev_dbg(dev, "unexpected MSI\n"); + } + + chained_irq_exit(chip, desc); +} + +static void brcm_msi_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) +{ + struct brcm_msi *msi = irq_data_get_irq_chip_data(data); + + msg->address_lo = lower_32_bits(msi->target_addr); + msg->address_hi = upper_32_bits(msi->target_addr); + msg->data = 0x6540 | data->hwirq; +} + +static int brcm_msi_set_affinity(struct irq_data *irq_data, + const struct cpumask *mask, bool force) +{ + return -EINVAL; +} + +static void brcm_msi_ack_irq(struct irq_data *data) +{ + struct brcm_msi *msi = irq_data_get_irq_chip_data(data); + + writel(1 << data->hwirq, msi->base + PCIE_MSI_INTR2_CLR); +} + + +static struct irq_chip brcm_msi_bottom_irq_chip = { + .name = "BRCM STB MSI", + .irq_compose_msi_msg = brcm_msi_compose_msi_msg, + .irq_set_affinity = brcm_msi_set_affinity, + .irq_ack = brcm_msi_ack_irq, +}; + +static int brcm_msi_alloc(struct brcm_msi *msi) +{ + int hwirq; + + mutex_lock(&msi->lock); + hwirq = bitmap_find_free_region(&msi->used, BRCM_INT_PCI_MSI_NR, 0); + mutex_unlock(&msi->lock); + + return hwirq; +} + +static void brcm_msi_free(struct brcm_msi *msi, unsigned long hwirq) +{ + mutex_lock(&msi->lock); + bitmap_release_region(&msi->used, hwirq, 0); + mutex_unlock(&msi->lock); +} + +static int brcm_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, + unsigned int nr_irqs, void *args) +{ + struct brcm_msi *msi = domain->host_data; + int hwirq; + + hwirq = brcm_msi_alloc(msi); + + if (hwirq < 0) + return hwirq; + + irq_domain_set_info(domain, virq, (irq_hw_number_t)hwirq, + &brcm_msi_bottom_irq_chip, domain->host_data, + handle_edge_irq, NULL, NULL); + return 0; +} + +static void brcm_irq_domain_free(struct irq_domain *domain, + unsigned int virq, unsigned int nr_irqs) +{ + struct irq_data *d = irq_domain_get_irq_data(domain, virq); + struct brcm_msi *msi = irq_data_get_irq_chip_data(d); + + brcm_msi_free(msi, d->hwirq); +} + +static const struct irq_domain_ops msi_domain_ops = { + .alloc = brcm_irq_domain_alloc, + .free = brcm_irq_domain_free, +}; + +static int brcm_allocate_domains(struct brcm_msi *msi) +{ + struct fwnode_handle *fwnode = of_node_to_fwnode(msi->np); + struct device *dev = msi->dev; + + msi->inner_domain = irq_domain_add_linear(NULL, BRCM_INT_PCI_MSI_NR, + &msi_domain_ops, msi); + if (!msi->inner_domain) { + dev_err(dev, "failed to create IRQ domain\n"); + return -ENOMEM; + } + + msi->msi_domain = pci_msi_create_irq_domain(fwnode, + &brcm_msi_domain_info, + msi->inner_domain); + if (!msi->msi_domain) { + dev_err(dev, "failed to create MSI domain\n"); + irq_domain_remove(msi->inner_domain); + return -ENOMEM; + } + + return 0; +} + +static void brcm_free_domains(struct brcm_msi *msi) +{ + irq_domain_remove(msi->msi_domain); + irq_domain_remove(msi->inner_domain); +} + +static void brcm_msi_remove(struct brcm_pcie *pcie) +{ + struct brcm_msi *msi = pcie->msi; + + if (!msi) + return; + irq_set_chained_handler(msi->irq, NULL); + irq_set_handler_data(msi->irq, NULL); + brcm_free_domains(msi); +} + +static void brcm_msi_set_regs(struct brcm_msi *msi) +{ + writel(0xffffffff, msi->base + PCIE_MSI_INTR2_MASK_CLR); + + /* + * The 0 bit of PCIE_MISC_MSI_BAR_CONFIG_LO is repurposed to MSI + * enable, which we set to 1. + */ + writel(lower_32_bits(msi->target_addr) | 0x1, + msi->base + PCIE_MISC_MSI_BAR_CONFIG_LO); + writel(upper_32_bits(msi->target_addr), + msi->base + PCIE_MISC_MSI_BAR_CONFIG_HI); + + writel(PCIE_MISC_MSI_DATA_CONFIG_VAL, + msi->base + PCIE_MISC_MSI_DATA_CONFIG); +} + +static int brcm_pcie_enable_msi(struct brcm_pcie *pcie) +{ + struct brcm_msi *msi; + int irq, ret; + struct device *dev = pcie->dev; + + irq = irq_of_parse_and_map(dev->of_node, 1); + if (irq <= 0) { + dev_err(dev, "cannot map MSI interrupt\n"); + return -ENODEV; + } + + msi = devm_kzalloc(dev, sizeof(struct brcm_msi), GFP_KERNEL); + if (!msi) + return -ENOMEM; + + msi->dev = dev; + msi->base = pcie->base; + msi->np = pcie->np; + msi->target_addr = pcie->msi_target_addr; + msi->irq = irq; + + ret = brcm_allocate_domains(msi); + if (ret) + return ret; + + irq_set_chained_handler_and_data(msi->irq, brcm_pcie_msi_isr, msi); + + brcm_msi_set_regs(msi); + pcie->msi = msi; + + return 0; +} + /* The controller is capable of serving in both RC and EP roles */ static bool brcm_pcie_rc_mode(struct brcm_pcie *pcie) { @@ -495,6 +732,18 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK); writel(tmp, base + PCIE_MISC_MISC_CTRL); + /* + * We ideally want the MSI target address to be located in the 32bit + * addressable memory area. Some devices might depend on it. This is + * possible either when the inbound window is located above the lower + * 4GB or when the inbound area is smaller than 4GB (taking into + * account the rounding-up we're forced to perform). + */ + if (rc_bar2_offset >= SZ_4G || (rc_bar2_size + rc_bar2_offset) < SZ_4G) + pcie->msi_target_addr = BRCM_MSI_TARGET_ADDR_LT_4GB; + else + pcie->msi_target_addr = BRCM_MSI_TARGET_ADDR_GT_4GB; + /* disable the PCIe->GISB memory window (RC_BAR1) */ tmp = readl(base + PCIE_MISC_RC_BAR1_CONFIG_LO); tmp &= ~PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK; @@ -644,6 +893,7 @@ static void brcm_pcie_turn_off(struct brcm_pcie *pcie) static void __brcm_pcie_remove(struct brcm_pcie *pcie) { + brcm_msi_remove(pcie); brcm_pcie_turn_off(pcie); clk_disable_unprepare(pcie->clk); clk_put(pcie->clk); @@ -662,7 +912,7 @@ static int brcm_pcie_remove(struct platform_device *pdev) static int brcm_pcie_probe(struct platform_device *pdev) { - struct device_node *np = pdev->dev.of_node; + struct device_node *np = pdev->dev.of_node, *msi_np; struct pci_host_bridge *bridge; struct brcm_pcie *pcie; struct pci_bus *child; @@ -706,6 +956,15 @@ static int brcm_pcie_probe(struct platform_device *pdev) if (ret) goto fail; + msi_np = of_parse_phandle(pcie->np, "msi-parent", 0); + if (pci_msi_enabled() && msi_np == pcie->np) { + ret = brcm_pcie_enable_msi(pcie); + if (ret) { + dev_err(pcie->dev, "probe of internal MSI failed"); + goto fail; + } + } + bridge->dev.parent = &pdev->dev; bridge->busnr = 0; bridge->ops = &brcm_pcie_ops; From patchwork Tue Nov 26 09:19:44 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 1200898 X-Patchwork-Delegate: lorenzo.pieralisi@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=suse.de Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 47MdgG3kynz9sRG for ; Tue, 26 Nov 2019 20:20:58 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727628AbfKZJUq (ORCPT ); Tue, 26 Nov 2019 04:20:46 -0500 Received: from mx2.suse.de ([195.135.220.15]:47978 "EHLO mx1.suse.de" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1727612AbfKZJUo (ORCPT ); Tue, 26 Nov 2019 04:20:44 -0500 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx1.suse.de (Postfix) with ESMTP id CEAB8B04F; Tue, 26 Nov 2019 09:20:43 +0000 (UTC) From: Nicolas Saenz Julienne To: andrew.murray@arm.com, maz@kernel.org, linux-kernel@vger.kernel.org Cc: james.quinlan@broadcom.com, mbrugger@suse.com, f.fainelli@gmail.com, phil@raspberrypi.org, wahrenst@gmx.net, jeremy.linton@arm.com, linux-pci@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, Nicolas Saenz Julienne Subject: [PATCH v3 6/7] MAINTAINERS: Add brcmstb PCIe controller Date: Tue, 26 Nov 2019 10:19:44 +0100 Message-Id: <20191126091946.7970-7-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.24.0 In-Reply-To: <20191126091946.7970-1-nsaenzjulienne@suse.de> References: <20191126091946.7970-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org The controller serves both the Raspberry Pi 4 (bcm2711) and brcmstb platforms. Signed-off-by: Nicolas Saenz Julienne --- MAINTAINERS | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 999e8cc7db96..c9c85d29792c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3237,6 +3237,8 @@ S: Maintained N: bcm2711 N: bcm2835 F: drivers/staging/vc04_services +F: Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +F: drivers/pci/controller/pcie-brcmstb.c BROADCOM BCM47XX MIPS ARCHITECTURE M: Hauke Mehrtens @@ -3292,6 +3294,8 @@ F: drivers/bus/brcmstb_gisb.c F: arch/arm/mm/cache-b15-rac.c F: arch/arm/include/asm/hardware/cache-b15-rac.h N: brcmstb +F: Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +F: drivers/pci/controller/pcie-brcmstb.c BROADCOM BMIPS CPUFREQ DRIVER M: Markus Mayer From patchwork Tue Nov 26 09:19:45 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 1200897 X-Patchwork-Delegate: lorenzo.pieralisi@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=suse.de Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 47MdgF5nKjz9sPZ for ; Tue, 26 Nov 2019 20:20:57 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727600AbfKZJUx (ORCPT ); Tue, 26 Nov 2019 04:20:53 -0500 Received: from mx2.suse.de ([195.135.220.15]:47934 "EHLO mx1.suse.de" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1727627AbfKZJUq (ORCPT ); Tue, 26 Nov 2019 04:20:46 -0500 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx1.suse.de (Postfix) with ESMTP id DF906BA0C; Tue, 26 Nov 2019 09:20:44 +0000 (UTC) From: Nicolas Saenz Julienne To: andrew.murray@arm.com, maz@kernel.org, linux-kernel@vger.kernel.org Cc: james.quinlan@broadcom.com, mbrugger@suse.com, f.fainelli@gmail.com, phil@raspberrypi.org, wahrenst@gmx.net, jeremy.linton@arm.com, linux-pci@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, Nicolas Saenz Julienne , Catalin Marinas , Will Deacon , linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 7/7] arm64: defconfig: Enable Broadcom's STB PCIe controller Date: Tue, 26 Nov 2019 10:19:45 +0100 Message-Id: <20191126091946.7970-8-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.24.0 In-Reply-To: <20191126091946.7970-1-nsaenzjulienne@suse.de> References: <20191126091946.7970-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org For now only used in the Raspberry Pi 4. Signed-off-by: Nicolas Saenz Julienne --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 7fa92defb964..dfd578129780 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -198,6 +198,7 @@ CONFIG_PCIE_ALTERA_MSI=y CONFIG_PCI_HOST_THUNDER_PEM=y CONFIG_PCI_HOST_THUNDER_ECAM=y CONFIG_PCIE_ROCKCHIP_HOST=m +CONFIG_PCIE_BRCMSTB=m CONFIG_PCI_LAYERSCAPE=y CONFIG_PCI_HISI=y CONFIG_PCIE_QCOM=y