@@ -6,7 +6,7 @@
*
* Author: Andy Fleming
*
- * Copyright (c) 2004-2006, 2008-2010 Freescale Semiconductor, Inc.
+ * Copyright (c) 2004-2006, 2008-2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -622,7 +622,7 @@ EXPORT_SYMBOL(gen10g_config_advert);
* to the values in phydev. Assumes that the values are valid.
* Please see phy_sanitize_settings().
*/
-static int genphy_setup_forced(struct phy_device *phydev)
+int genphy_setup_forced(struct phy_device *phydev)
{
int err;
int ctl = 0;
@@ -641,6 +641,7 @@ static int genphy_setup_forced(struct phy_device *phydev)
return err;
}
+EXPORT_SYMBOL(genphy_setup_forced);
int gen10g_setup_forced(struct phy_device *phydev)
{
@@ -3,7 +3,7 @@
*
* Author: Kriston Carson
*
- * Copyright (c) 2005, 2009 Freescale Semiconductor, Inc.
+ * Copyright (c) 2005, 2009, 2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -45,6 +45,10 @@
/* Vitesse Auxiliary Control/Status Register */
#define MII_VSC8244_AUX_CONSTAT 0x1c
+#define MII_VSC82X4_EXT_PAGE_16E 0x10
+#define MII_VSC82X4_EXT_PAGE_17E 0x11
+#define MII_VSC82X4_EXT_PAGE_18E 0x12
+#define MII_VSC82X4_EXT_PAGE_ACCESS 0x1f
#define MII_VSC8244_AUXCONSTAT_INIT 0x0000
#define MII_VSC8244_AUXCONSTAT_DUPLEX 0x0020
#define MII_VSC8244_AUXCONSTAT_SPEED 0x0018
@@ -140,6 +144,65 @@ static int vsc82xx_config_intr(struct phy_device *phydev)
return err;
}
+/* vsc82x4_config_autocross_enable - Enable auto MDI/MDI-X for forced links
+ * @phydev: target phy_device struct
+ *
+ * Enable auto MDI/MDI-X when in 10/100 forced link speeds by writing
+ * special values in the VSC8234/VSC8244 extended reserved registers
+ *
+ */
+static int vsc82x4_config_autocross_enable(struct phy_device *phydev)
+{
+ int ret;
+
+ if (phydev->autoneg == AUTONEG_ENABLE || phydev->speed > SPEED_100)
+ return 0;
+
+ /* map extended registers set 0x10 - 0x1e */
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x52b5);
+ if (ret >= 0)
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_18E, 0x0012);
+ if (ret >= 0)
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_17E, 0x2803);
+ if (ret >= 0)
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_16E, 0x87fa);
+ /* map standard registers set 0x10 - 0x1e */
+ if (ret >= 0)
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000);
+ else
+ phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000);
+
+ return ret;
+}
+
+/**
+ * vsc82x4_config_aneg - restart auto-negotiation or write BMCR
+ * @phydev: target phy_device struct
+ *
+ * Description: If auto-negotiation is enabled, we configure the
+ * advertising, and then restart auto-negotiation. If it is not
+ * enabled, then we write the BMCR and also start the auto
+ * MDI/MDI-X feature
+ *
+ */
+static int vsc82x4_config_aneg(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Enable auto MDI/MDI-X when in 10/100 forced link speeds by
+ * writing special values in the VSC8234 extended reserved registers */
+ if (phydev->autoneg != AUTONEG_ENABLE && phydev->speed <= SPEED_100) {
+ ret = genphy_setup_forced(phydev);
+
+ if (ret < 0) /* error */
+ return ret;
+
+ return vsc82x4_config_autocross_enable(phydev);
+ }
+
+ return genphy_config_aneg(phydev);
+}
+
/* Vitesse 824x */
static struct phy_driver vsc8244_driver = {
.phy_id = PHY_ID_VSC8244,
@@ -148,7 +211,7 @@ static struct phy_driver vsc8244_driver = {
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &vsc824x_config_init,
- .config_aneg = &genphy_config_aneg,
+ .config_aneg = &vsc82x4_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &vsc824x_ack_interrupt,
.config_intr = &vsc82xx_config_intr,
@@ -163,7 +226,7 @@ static struct phy_driver vsc8234_driver = {
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &vsc824x_config_init,
- .config_aneg = &genphy_config_aneg,
+ .config_aneg = &vsc82x4_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &vsc824x_ack_interrupt,
.config_intr = &vsc82xx_config_intr,
@@ -6,7 +6,7 @@
*
* Author: Andy Fleming
*
- * Copyright (c) 2004-2010 Freescale Semiconductor, Inc.
+ * Copyright (c) 2004-2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -543,6 +543,7 @@ static inline int phy_read_status(struct phy_device *phydev) {
return phydev->drv->read_status(phydev);
}
+int genphy_setup_forced(struct phy_device *phydev);
int genphy_restart_aneg(struct phy_device *phydev);
int genphy_config_aneg(struct phy_device *phydev);
int genphy_update_link(struct phy_device *phydev);