@@ -99,25 +99,19 @@ static struct pci_dev *pci_upstream_ptm(struct pci_dev *dev)
return NULL;
}
+/*
+ * Find the PTM Capability (if present) and extract the information we need
+ * to use it.
+ */
void pci_ptm_init(struct pci_dev *dev)
{
u16 ptm;
- u32 cap, ctrl;
- u8 local_clock;
+ u32 cap;
struct pci_dev *ups;
if (!pci_is_pcie(dev))
return;
- /*
- * Enable PTM only on interior devices (root ports, switch ports,
- * etc.) on the assumption that it causes no link traffic until an
- * endpoint enables it.
- */
- if ((pci_pcie_type(dev) == PCI_EXP_TYPE_ENDPOINT ||
- pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END))
- return;
-
ptm = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PTM);
if (!ptm)
return;
@@ -126,76 +120,76 @@ void pci_ptm_init(struct pci_dev *dev)
pci_add_ext_cap_save_buffer(dev, PCI_EXT_CAP_ID_PTM, sizeof(u16));
pci_read_config_dword(dev, ptm + PCI_PTM_CAP, &cap);
- local_clock = (cap & PCI_PTM_GRANULARITY_MASK) >> 8;
+ dev->ptm_granularity = (cap & PCI_PTM_GRANULARITY_MASK) >> 8;
/*
- * There's no point in enabling PTM unless it's enabled in the
- * upstream device or this device can be a PTM Root itself. Per
- * the spec recommendation (PCIe r3.1, sec 7.32.3), select the
- * furthest upstream Time Source as the PTM Root.
+ * Per the spec recommendation (PCIe r6.0, sec 7.9.15.3), select the
+ * furthest upstream Time Source as the PTM Root. For Endpoints,
+ * "the Effective Granularity is the maximum Local Clock Granularity
+ * reported by the PTM Root and all intervening PTM Time Sources."
*/
ups = pci_upstream_ptm(dev);
- if (ups && ups->ptm_enabled) {
- ctrl = PCI_PTM_CTRL_ENABLE;
+ if (ups) {
if (ups->ptm_granularity == 0)
dev->ptm_granularity = 0;
- else if (ups->ptm_granularity > local_clock)
+ else if (ups->ptm_granularity > dev->ptm_granularity)
dev->ptm_granularity = ups->ptm_granularity;
- } else {
- if (cap & PCI_PTM_CAP_ROOT) {
- ctrl = PCI_PTM_CTRL_ENABLE | PCI_PTM_CTRL_ROOT;
- dev->ptm_root = 1;
- dev->ptm_granularity = local_clock;
- } else
- return;
- }
+ } else if (cap & PCI_PTM_CAP_ROOT) {
+ dev->ptm_root = 1;
+ } else if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
- ctrl |= dev->ptm_granularity << 8;
- pci_write_config_dword(dev, ptm + PCI_PTM_CTRL, ctrl);
- dev->ptm_enabled = 1;
+ /*
+ * Per sec 7.9.15.3, this should be the Local Clock
+ * Granularity of the associated Time Source. But it
+ * doesn't say how to find that Time Source.
+ */
+ dev->ptm_granularity = 0;
+ }
- pci_ptm_info(dev);
+ if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
+ pci_pcie_type(dev) == PCI_EXP_TYPE_UPSTREAM)
+ pci_enable_ptm(dev, NULL);
}
+/**
+ * pci_enable_ptm() - Enable Precision Time Measurement
+ * @dev: PCI device
+ * @granularity: pointer to return granularity
+ *
+ * Enable Precision Time Measurement for @dev. If successful and
+ * @granularity is non-NULL, return the Effective Granularity.
+ *
+ * Return: zero if successful, or -EINVAL if @dev lacks a PTM Capability or
+ * is not a PTM Root and lacks an upstream path of PTM-enabled devices.
+ */
int pci_enable_ptm(struct pci_dev *dev, u8 *granularity)
{
- u16 ptm;
- u32 cap, ctrl;
+ u16 ptm = dev->ptm_cap;
struct pci_dev *ups;
+ u32 ctrl;
- if (!pci_is_pcie(dev))
- return -EINVAL;
-
- ptm = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PTM);
if (!ptm)
return -EINVAL;
- dev->ptm_cap = ptm;
- pci_read_config_dword(dev, ptm + PCI_PTM_CAP, &cap);
- if (!(cap & PCI_PTM_CAP_REQ))
- return -EINVAL;
-
/*
- * For a PCIe Endpoint, PTM is only useful if the endpoint can
- * issue PTM requests to upstream devices that have PTM enabled.
- *
- * For Root Complex Integrated Endpoints, there is no upstream
- * device, so there must be some implementation-specific way to
- * associate the endpoint with a time source.
+ * A device uses local PTM Messages to request time information
+ * from a PTM Root that's farther upstream. Every device along the
+ * path must support PTM and have it enabled so it can handle the
+ * messages. Therefore, if this device is not a PTM Root, the
+ * upstream link partner must have PTM enabled before we can enable
+ * PTM.
*/
- if (pci_pcie_type(dev) == PCI_EXP_TYPE_ENDPOINT) {
+ if (!dev->ptm_root) {
ups = pci_upstream_ptm(dev);
if (!ups || !ups->ptm_enabled)
return -EINVAL;
-
- dev->ptm_granularity = ups->ptm_granularity;
- } else if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
- dev->ptm_granularity = 0;
- } else
- return -EINVAL;
+ }
ctrl = PCI_PTM_CTRL_ENABLE;
ctrl |= dev->ptm_granularity << 8;
+ if (dev->ptm_root)
+ ctrl |= PCI_PTM_CTRL_ROOT;
+
pci_write_config_dword(dev, ptm + PCI_PTM_CTRL, ctrl);
dev->ptm_enabled = 1;