@@ -1768,6 +1768,23 @@ enum link_training_result dc_link_dp_perform_link_training(
return status;
}
+/*
+ * Train DP tunneling link for USB4 DPIA display endpoint.
+ *
+ * DPIA equivalent of dc_link_dp_perfrorm_link_training.
+ */
+enum link_training_result dc_link_dpia_perform_link_training(struct dc_link *link,
+ const struct dc_link_settings *link_setting,
+ bool skip_video_pattern)
+{
+ enum link_training_result status;
+
+ /** @todo Always fail until USB4 DPIA training implemented. */
+ status = LINK_TRAINING_CR_FAIL_LANE0;
+
+ return status;
+}
+
bool perform_link_training_with_retries(
const struct dc_link_settings *link_setting,
bool skip_video_pattern,
@@ -1836,10 +1853,15 @@ bool perform_link_training_with_retries(
dc_link_dp_perform_link_training_skip_aux(link, ¤t_setting);
return true;
} else {
- status = dc_link_dp_perform_link_training(
- link,
- ¤t_setting,
- skip_video_pattern);
+ if (link->is_dig_mapping_flexible)
+ status = dc_link_dpia_perform_link_training(link,
+ link_setting,
+ skip_video_pattern);
+ else
+ status = dc_link_dp_perform_link_training(link,
+ ¤t_setting,
+ skip_video_pattern);
+
if (status == LINK_TRAINING_SUCCESS)
return true;
}
@@ -362,11 +362,44 @@ void dcn31_link_encoder_construct_minimal(
SIGNAL_TYPE_EDP;
}
+/* DPIA equivalent of link_transmitter_control. */
+static bool link_dpia_control(struct dc_context *dc_ctx,
+ struct dmub_cmd_dig_dpia_control_data *dpia_control)
+{
+ union dmub_rb_cmd cmd;
+ struct dc_dmub_srv *dmub = dc_ctx->dmub_srv;
+
+ memset(&cmd, 0, sizeof(cmd));
+
+ cmd.dig1_dpia_control.header.type = DMUB_CMD__DPIA;
+ cmd.dig1_dpia_control.header.sub_type =
+ DMUB_CMD__DPIA_DIG1_DPIA_CONTROL;
+ cmd.dig1_dpia_control.header.payload_bytes =
+ sizeof(cmd.dig1_dpia_control) -
+ sizeof(cmd.dig1_dpia_control.header);
+
+ cmd.dig1_dpia_control.dpia_control = *dpia_control;
+
+ dc_dmub_srv_cmd_queue(dmub, &cmd);
+ dc_dmub_srv_cmd_execute(dmub);
+ dc_dmub_srv_wait_idle(dmub);
+
+ return false;
+}
+
+static void link_encoder_disable(struct dcn10_link_encoder *enc10)
+{
+ /* reset training complete */
+ REG_UPDATE(DP_LINK_CNTL, DP_LINK_TRAINING_COMPLETE, 0);
+}
+
void dcn31_link_encoder_enable_dp_output(
struct link_encoder *enc,
const struct dc_link_settings *link_settings,
enum clock_source_id clock_source)
{
+ struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
+
/* Enable transmitter and encoder. */
if (!link_enc_cfg_is_transmitter_mappable(enc->ctx->dc->current_state, enc)) {
@@ -374,7 +407,30 @@ void dcn31_link_encoder_enable_dp_output(
} else {
- /** @todo Handle transmitter with programmable mapping to link encoder. */
+ struct dmub_cmd_dig_dpia_control_data dpia_control = { 0 };
+ struct dc_link *link;
+
+ link = link_enc_cfg_get_link_using_link_enc(enc->ctx->dc, enc->preferred_engine);
+
+ enc1_configure_encoder(enc10, link_settings);
+
+ dpia_control.action = (uint8_t)TRANSMITTER_CONTROL_ENABLE;
+ dpia_control.enc_id = enc->preferred_engine;
+ dpia_control.mode_laneset.digmode = 0; /* 0 for SST; 5 for MST */
+ dpia_control.lanenum = (uint8_t)link_settings->lane_count;
+ dpia_control.symclk_10khz = link_settings->link_rate *
+ LINK_RATE_REF_FREQ_IN_KHZ / 10;
+ dpia_control.hpdsel = 5; /* Unused by DPIA */
+
+ if (link) {
+ dpia_control.dpia_id = link->ddc_hw_inst;
+ } else {
+ DC_LOG_ERROR("%s: Failed to execute DPIA enable DMUB command.\n", __func__);
+ BREAK_TO_DEBUGGER();
+ return;
+ }
+
+ link_dpia_control(enc->ctx, &dpia_control);
}
}
@@ -383,6 +439,8 @@ void dcn31_link_encoder_enable_dp_mst_output(
const struct dc_link_settings *link_settings,
enum clock_source_id clock_source)
{
+ struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
+
/* Enable transmitter and encoder. */
if (!link_enc_cfg_is_transmitter_mappable(enc->ctx->dc->current_state, enc)) {
@@ -390,7 +448,30 @@ void dcn31_link_encoder_enable_dp_mst_output(
} else {
- /** @todo Handle transmitter with programmable mapping to link encoder. */
+ struct dmub_cmd_dig_dpia_control_data dpia_control = { 0 };
+ struct dc_link *link;
+
+ link = link_enc_cfg_get_link_using_link_enc(enc->ctx->dc, enc->preferred_engine);
+
+ enc1_configure_encoder(enc10, link_settings);
+
+ dpia_control.action = (uint8_t)TRANSMITTER_CONTROL_ENABLE;
+ dpia_control.enc_id = enc->preferred_engine;
+ dpia_control.mode_laneset.digmode = 5; /* 0 for SST; 5 for MST */
+ dpia_control.lanenum = (uint8_t)link_settings->lane_count;
+ dpia_control.symclk_10khz = link_settings->link_rate *
+ LINK_RATE_REF_FREQ_IN_KHZ / 10;
+ dpia_control.hpdsel = 5; /* Unused by DPIA */
+
+ if (link) {
+ dpia_control.dpia_id = link->ddc_hw_inst;
+ } else {
+ DC_LOG_ERROR("%s: Failed to execute DPIA enable DMUB command.\n", __func__);
+ BREAK_TO_DEBUGGER();
+ return;
+ }
+
+ link_dpia_control(enc->ctx, &dpia_control);
}
}
@@ -398,6 +479,8 @@ void dcn31_link_encoder_disable_output(
struct link_encoder *enc,
enum signal_type signal)
{
+ struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
+
/* Disable transmitter and encoder. */
if (!link_enc_cfg_is_transmitter_mappable(enc->ctx->dc->current_state, enc)) {
@@ -405,7 +488,36 @@ void dcn31_link_encoder_disable_output(
} else {
- /** @todo Handle transmitter with programmable mapping to link encoder. */
+ struct dmub_cmd_dig_dpia_control_data dpia_control = { 0 };
+ struct dc_link *link;
+
+ if (!dcn10_is_dig_enabled(enc))
+ return;
+
+ link = link_enc_cfg_get_link_using_link_enc(enc->ctx->dc, enc->preferred_engine);
+
+ dpia_control.action = (uint8_t)TRANSMITTER_CONTROL_DISABLE;
+ dpia_control.enc_id = enc->preferred_engine;
+ if (signal == SIGNAL_TYPE_DISPLAY_PORT) {
+ dpia_control.mode_laneset.digmode = 0; /* 0 for SST; 5 for MST */
+ } else if (signal == SIGNAL_TYPE_DISPLAY_PORT_MST) {
+ dpia_control.mode_laneset.digmode = 5; /* 0 for SST; 5 for MST */
+ } else {
+ DC_LOG_ERROR("%s: USB4 DPIA only supports DisplayPort.\n", __func__);
+ BREAK_TO_DEBUGGER();
+ }
+
+ if (link) {
+ dpia_control.dpia_id = link->ddc_hw_inst;
+ } else {
+ DC_LOG_ERROR("%s: Failed to execute DPIA enable DMUB command.\n", __func__);
+ BREAK_TO_DEBUGGER();
+ return;
+ }
+
+ link_dpia_control(enc->ctx, &dpia_control);
+
+ link_encoder_disable(enc10);
}
}
@@ -652,6 +652,10 @@ enum dmub_cmd_type {
* Command type used for all panel control commands.
*/
DMUB_CMD__PANEL_CNTL = 74,
+ /**
+ * Command type used for interfacing with DPIA.
+ */
+ DMUB_CMD__DPIA = 77,
/**
* Command type used for EDID CEA parsing
*/
@@ -680,6 +684,11 @@ enum dmub_out_cmd_type {
DMUB_OUT_CMD__DP_HPD_NOTIFY = 2,
};
+/* DMUB_CMD__DPIA command sub-types. */
+enum dmub_cmd_dpia_type {
+ DMUB_CMD__DPIA_DIG1_DPIA_CONTROL = 0,
+};
+
#pragma pack(push, 1)
/**
@@ -999,6 +1008,34 @@ struct dmub_rb_cmd_dig1_transmitter_control {
union dmub_cmd_dig1_transmitter_control_data transmitter_control; /**< payload */
};
+/**
+ * DPIA tunnel command parameters.
+ */
+struct dmub_cmd_dig_dpia_control_data {
+ uint8_t enc_id; /** 0 = ENGINE_ID_DIGA, ... */
+ uint8_t action; /** ATOM_TRANSMITER_ACTION_DISABLE/ENABLE/SETUP_VSEMPH */
+ union {
+ uint8_t digmode; /** enum atom_encode_mode_def */
+ uint8_t dplaneset; /** DP voltage swing and pre-emphasis value */
+ } mode_laneset;
+ uint8_t lanenum; /** Lane number 1, 2, 4, 8 */
+ uint32_t symclk_10khz; /** Symbol Clock in 10Khz */
+ uint8_t hpdsel; /** =0: HPD is not assigned */
+ uint8_t digfe_sel; /** DIG stream( front-end ) selection, bit0 - DIG0 FE */
+ uint8_t dpia_id; /** Index of DPIA */
+ uint8_t fec_rdy : 1;
+ uint8_t reserved : 7;
+ uint32_t reserved1;
+};
+
+/**
+ * DMUB command for DPIA tunnel control.
+ */
+struct dmub_rb_cmd_dig1_dpia_control {
+ struct dmub_cmd_header header;
+ struct dmub_cmd_dig_dpia_control_data dpia_control;
+};
+
/**
* struct dmub_rb_cmd_dpphy_init - DPPHY init.
*/
@@ -2386,6 +2423,10 @@ union dmub_rb_cmd {
* Definition of a DMUB_CMD__VBIOS_LVTMA_CONTROL command.
*/
struct dmub_rb_cmd_lvtma_control lvtma_control;
+ /**
+ * Definition of a DMUB_CMD__DPIA_DIG1_CONTROL command.
+ */
+ struct dmub_rb_cmd_dig1_dpia_control dig1_dpia_control;
/**
* Definition of a DMUB_CMD__EDID_CEA command.
*/