@@ -2012,5 +2012,16 @@ config RAVE_SP_CORE
Select this to get support for the Supervisory Processor
device found on several devices in RAVE line of hardware.
+config MFD_AHC1EC0
+ tristate "Advantech AHC1EC0 Embedded Controller Module"
+ depends on X86
+ depends on UBUNTU_ODM_DRIVERS
+ select MFD_CORE
+ help
+ This is the core function that for Advantech EC drivers. It
+ includes the sub-devices such as hwmon, watchdog, etc. And also
+ provides expose functions for sub-devices to read/write the value
+ to embedded controller.
+
endmenu
endif
@@ -256,3 +256,5 @@ obj-$(CONFIG_MFD_ROHM_BD70528) += rohm-bd70528.o
obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o
obj-$(CONFIG_MFD_STMFX) += stmfx.o
+obj-$(CONFIG_MFD_AHC1EC0) += ahc1ec0.o
+
new file mode 100644
@@ -0,0 +1,808 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Advantech embedded controller core driver AHC1EC0
+ *
+ * Copyright 2020 Advantech IIoT Group
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/errno.h>
+#include <linux/mfd/ahc1ec0.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#define DRV_NAME "ahc1ec0"
+
+enum {
+ ADVEC_SUBDEV_BRIGHTNESS = 0,
+ ADVEC_SUBDEV_EEPROM,
+ ADVEC_SUBDEV_GPIO,
+ ADVEC_SUBDEV_HWMON,
+ ADVEC_SUBDEV_LED,
+ ADVEC_SUBDEV_WDT,
+ ADVEC_SUBDEV_MAX,
+};
+
+/* Wait IBF (Input Buffer Full) clear */
+static int ec_wait_write(void)
+{
+ int i;
+
+ for (i = 0; i < EC_MAX_TIMEOUT_COUNT; i++) {
+ if ((inb(EC_COMMAND_PORT) & EC_COMMAND_BIT_IBF) == 0)
+ return 0;
+
+ udelay(EC_RETRY_UDELAY);
+ }
+
+ return -ETIMEDOUT;
+}
+
+/* Wait OBF (Output Buffer Full) data ready */
+static int ec_wait_read(void)
+{
+ int i;
+
+ for (i = 0; i < EC_MAX_TIMEOUT_COUNT; i++) {
+ if ((inb(EC_COMMAND_PORT) & EC_COMMAND_BIT_OBF) != 0)
+ return 0;
+
+ udelay(EC_RETRY_UDELAY);
+ }
+
+ return -ETIMEDOUT;
+}
+
+/* Read data from EC HW RAM, the process is the following:
+ * Step 0. Wait IBF clear to send command
+ * Step 1. Send read command to EC command port
+ * Step 2. Wait IBF clear that means command is got by EC
+ * Step 3. Send read address to EC data port
+ * Step 4. Wait OBF data ready
+ * Step 5. Get data from EC data port
+ */
+int read_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr, unsigned char *data)
+{
+ int ret;
+
+ mutex_lock(&adv_ec_data->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_HW_RAM_READ, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(addr, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+ *data = inb(EC_STATUS_PORT);
+
+ mutex_unlock(&adv_ec_data->lock);
+
+ return ret;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+ dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+ __LINE__);
+
+ return ret;
+}
+
+/* Write data to EC HW RAM
+ * Step 0. Wait IBF clear to send command
+ * Step 1. Send write command to EC command port
+ * Step 2. Wait IBF clear that means command is got by EC
+ * Step 3. Send write address to EC data port
+ * Step 4. Wait IBF clear that means command is got by EC
+ * Step 5. Send data to EC data port
+ */
+int write_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr, unsigned char data)
+{
+ int ret;
+
+ mutex_lock(&adv_ec_data->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_HW_RAM_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(addr, EC_STATUS_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(data, EC_STATUS_PORT);
+
+ mutex_unlock(&adv_ec_data->lock);
+
+ return 0;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+
+ dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+ __LINE__);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(write_hw_ram);
+
+/* Get dynamic control table */
+static int adv_get_dynamic_tab(struct adv_ec_platform_data *adv_ec_data)
+{
+ int i, ret;
+ unsigned char pin_tmp, device_id;
+
+ mutex_lock(&adv_ec_data->lock);
+
+ for (i = 0; i < EC_MAX_TBL_NUM; i++) {
+ adv_ec_data->dym_tbl[i].device_id = 0xff;
+ adv_ec_data->dym_tbl[i].hw_pin_num = 0xff;
+ }
+
+ for (i = 0; i < EC_MAX_TBL_NUM; i++) {
+ ret = ec_wait_write();
+ if (ret) {
+ dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
+ __LINE__);
+ goto error;
+ }
+ outb(EC_TBL_WRITE_ITEM, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret) {
+ dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
+ __LINE__);
+ goto error;
+ }
+ outb(i, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret) {
+ dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
+ __LINE__);
+ goto error;
+ }
+
+ /*
+ * If item is defined, EC will return item number.
+ * If table item is not defined, EC will return 0xFF.
+ */
+ pin_tmp = inb(EC_STATUS_PORT);
+ if (pin_tmp == 0xff) {
+ dev_dbg(adv_ec_data->dev, "%s: inb(EC_STATUS_PORT)=0x%02x != 0xff.\n",
+ __func__, pin_tmp);
+ goto pass;
+ }
+
+ ret = ec_wait_write();
+ if (ret) {
+ dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
+ __LINE__);
+ goto error;
+ }
+ outb(EC_TBL_GET_PIN, EC_COMMAND_PORT);
+
+ ret = ec_wait_read();
+ if (ret) {
+ dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
+ __LINE__);
+ goto error;
+ }
+ pin_tmp = inb(EC_STATUS_PORT) & 0xff;
+ if (pin_tmp == 0xff) {
+ dev_dbg(adv_ec_data->dev, "%s: pin_tmp(0x%02X). line: %d\n", __func__,
+ pin_tmp, __LINE__);
+ goto pass;
+ }
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_TBL_GET_DEVID, EC_COMMAND_PORT);
+
+ ret = ec_wait_read();
+ if (ret) {
+ dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
+ __LINE__);
+ goto error;
+ }
+ device_id = inb(EC_STATUS_PORT) & 0xff;
+
+ dev_dbg(adv_ec_data->dev, "%s: device_id=0x%02X. line: %d\n", __func__,
+ device_id, __LINE__);
+
+ adv_ec_data->dym_tbl[i].device_id = device_id;
+ adv_ec_data->dym_tbl[i].hw_pin_num = pin_tmp;
+ }
+
+pass:
+ mutex_unlock(&adv_ec_data->lock);
+ return 0;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+ dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n",
+ __func__, __LINE__);
+ return ret;
+}
+
+int read_ad_value(struct adv_ec_platform_data *adv_ec_data, unsigned char hwpin,
+ unsigned char multi)
+{
+ int ret;
+ u32 ret_val;
+ unsigned int LSB, MSB;
+
+ mutex_lock(&adv_ec_data->lock);
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_AD_INDEX_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(hwpin, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+
+ if (inb(EC_STATUS_PORT) == 0xff) {
+ mutex_unlock(&adv_ec_data->lock);
+ return -1;
+ }
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_AD_LSB_READ, EC_COMMAND_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+ LSB = inb(EC_STATUS_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_AD_MSB_READ, EC_COMMAND_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+ MSB = inb(EC_STATUS_PORT);
+ ret_val = ((MSB << 8) | LSB) & 0x03FF;
+ ret_val = ret_val * multi * 100;
+
+ mutex_unlock(&adv_ec_data->lock);
+ return ret_val;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+
+ dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+ __LINE__);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(read_ad_value);
+
+int read_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
+ unsigned char *pvalue)
+{
+ int ret;
+ unsigned char value;
+
+ mutex_lock(&adv_ec_data->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_ACPI_RAM_READ, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(addr, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+ value = inb(EC_STATUS_PORT);
+ *pvalue = value;
+
+ mutex_unlock(&adv_ec_data->lock);
+
+ return 0;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+
+ dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+ __LINE__);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(read_acpi_value);
+
+int write_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
+ unsigned char value)
+{
+ int ret;
+
+ mutex_lock(&adv_ec_data->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_ACPI_DATA_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(addr, EC_STATUS_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(value, EC_STATUS_PORT);
+
+ mutex_unlock(&adv_ec_data->lock);
+ return 0;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+
+ dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+ __LINE__);
+
+ return ret;
+}
+
+int read_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+ unsigned char *pvalue)
+{
+ int ret;
+
+ unsigned char gpio_status_value;
+
+ mutex_lock(&adv_ec_data->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(PinNumber, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+
+ if (inb(EC_STATUS_PORT) == 0xff) {
+ dev_err(adv_ec_data->dev, "%s: Read Pin Number error!!\n", __func__);
+ mutex_unlock(&adv_ec_data->lock);
+ return -1;
+ }
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_STATUS_READ, EC_COMMAND_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+ gpio_status_value = inb(EC_STATUS_PORT);
+
+ *pvalue = gpio_status_value;
+ mutex_unlock(&adv_ec_data->lock);
+ return 0;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+
+ dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+ __LINE__);
+ return ret;
+}
+
+int write_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+ unsigned char value)
+{
+ int ret;
+
+ mutex_lock(&adv_ec_data->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(PinNumber, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+
+ if (inb(EC_STATUS_PORT) == 0xff) {
+ mutex_unlock(&adv_ec_data->lock);
+ dev_err(adv_ec_data->dev, "%s: Read Pin Number error!!\n", __func__);
+ return -1;
+ }
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_STATUS_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(value, EC_STATUS_PORT);
+
+ mutex_unlock(&adv_ec_data->lock);
+ return 0;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+ dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d", __func__,
+ __LINE__);
+
+ return ret;
+}
+
+int read_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+ unsigned char *pvalue)
+{
+ int ret;
+ unsigned char gpio_dir_value;
+
+ mutex_lock(&adv_ec_data->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(PinNumber, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+
+ if (inb(EC_STATUS_PORT) == 0xff) {
+ mutex_unlock(&adv_ec_data->lock);
+ dev_err(adv_ec_data->dev, "%s: Read Pin Number error!! line: %d\n", __func__,
+ __LINE__);
+ return -1;
+ }
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_DIR_READ, EC_COMMAND_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+ gpio_dir_value = inb(EC_STATUS_PORT);
+ *pvalue = gpio_dir_value;
+
+ mutex_unlock(&adv_ec_data->lock);
+ return 0;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+
+ dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+ __LINE__);
+
+ return ret;
+}
+
+int write_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+ unsigned char value)
+{
+ int ret;
+
+ mutex_lock(&adv_ec_data->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(PinNumber, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+
+ if (inb(EC_STATUS_PORT) == 0xff) {
+ mutex_unlock(&adv_ec_data->lock);
+ dev_warn(adv_ec_data->dev, "%s: Read Pin Number error!! line: %d\n", __func__,
+ __LINE__);
+
+ return -1;
+ }
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_DIR_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(value, EC_STATUS_PORT);
+
+ mutex_unlock(&adv_ec_data->lock);
+ return 0;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+
+ dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+ __LINE__);
+
+ return ret;
+}
+
+int write_hwram_command(struct adv_ec_platform_data *adv_ec_data, unsigned char data)
+{
+ int ret;
+
+ mutex_lock(&adv_ec_data->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(data, EC_COMMAND_PORT);
+
+ mutex_unlock(&adv_ec_data->lock);
+ return 0;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+
+ dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+ __LINE__);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(write_hwram_command);
+
+static int adv_ec_get_productname(struct adv_ec_platform_data *adv_ec_data, char *product)
+{
+ const char *vendor, *device;
+ int length = 0;
+
+ /* Check it is Advantech board */
+ vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ if (memcmp(vendor, "Advantech", sizeof("Advantech")) != 0)
+ return -ENODEV;
+
+ /* Get product model name */
+ device = dmi_get_system_info(DMI_PRODUCT_NAME);
+ if (device) {
+ while ((device[length] != ' ')
+ && (length < AMI_ADVANTECH_BOARD_ID_LENGTH))
+ length++;
+ memset(product, 0, AMI_ADVANTECH_BOARD_ID_LENGTH);
+ memmove(product, device, length);
+
+ dev_info(adv_ec_data->dev, "BIOS Product Name = %s\n", product);
+
+ return 0;
+ }
+
+ dev_warn(adv_ec_data->dev, "This device is not Advantech Board (%s)!\n", product);
+
+ return -ENODEV;
+}
+
+static const struct mfd_cell adv_ec_sub_cells[] = {
+ { .name = "adv-ec-brightness", },
+ { .name = "adv-ec-eeprom", },
+ { .name = "adv-ec-gpio", },
+ { .name = "ahc1ec0-hwmon", },
+ { .name = "adv-ec-led", },
+ { .name = "ahc1ec0-wdt", },
+};
+
+static int adv_ec_init_ec_data(struct adv_ec_platform_data *adv_ec_data)
+{
+ int ret;
+
+ adv_ec_data->sub_dev_mask = 0;
+ adv_ec_data->sub_dev_nb = 0;
+ adv_ec_data->dym_tbl = NULL;
+ adv_ec_data->bios_product_name = NULL;
+
+ mutex_init(&adv_ec_data->lock);
+
+ /* Get product name */
+ adv_ec_data->bios_product_name =
+ devm_kzalloc(adv_ec_data->dev, AMI_ADVANTECH_BOARD_ID_LENGTH, GFP_KERNEL);
+ if (!adv_ec_data->bios_product_name)
+ return -ENOMEM;
+
+ memset(adv_ec_data->bios_product_name, 0, AMI_ADVANTECH_BOARD_ID_LENGTH);
+ ret = adv_ec_get_productname(adv_ec_data, adv_ec_data->bios_product_name);
+ if (ret)
+ return ret;
+
+ /* Get pin table */
+ adv_ec_data->dym_tbl = devm_kzalloc(adv_ec_data->dev,
+ EC_MAX_TBL_NUM * sizeof(struct ec_dynamic_table),
+ GFP_KERNEL);
+ if (!adv_ec_data->dym_tbl)
+ return -ENOMEM;
+
+ ret = adv_get_dynamic_tab(adv_ec_data);
+
+ return ret;
+}
+
+static int adv_ec_parse_prop(struct adv_ec_platform_data *adv_ec_data)
+{
+ int i, ret;
+ u32 nb, sub_dev[ADVEC_SUBDEV_MAX];
+
+ ret = device_property_read_u32(adv_ec_data->dev, "advantech,sub-dev-nb", &nb);
+ if (ret < 0) {
+ dev_err(adv_ec_data->dev, "get sub-dev-nb failed! (%d)\n", ret);
+ return ret;
+ }
+ adv_ec_data->sub_dev_nb = nb;
+
+ ret = device_property_read_u32_array(adv_ec_data->dev, "advantech,sub-dev",
+ sub_dev, nb);
+ if (ret < 0) {
+ dev_err(adv_ec_data->dev, "get sub-dev failed! (%d)\n", ret);
+ return ret;
+ }
+
+ for (i = 0; i < nb; i++) {
+ switch (sub_dev[i]) {
+ case ADVEC_SUBDEV_BRIGHTNESS:
+ case ADVEC_SUBDEV_EEPROM:
+ case ADVEC_SUBDEV_GPIO:
+ case ADVEC_SUBDEV_HWMON:
+ case ADVEC_SUBDEV_LED:
+ case ADVEC_SUBDEV_WDT:
+ adv_ec_data->sub_dev_mask |= BIT(sub_dev[i]);
+ break;
+ default:
+ dev_err(adv_ec_data->dev, "invalid prop value(%d)!\n",
+ sub_dev[i]);
+ }
+ }
+ dev_info(adv_ec_data->dev, "sub-dev mask = 0x%x\n", adv_ec_data->sub_dev_mask);
+
+ return 0;
+}
+
+static int adv_ec_probe(struct platform_device *pdev)
+{
+ int ret, i;
+ struct device *dev = &pdev->dev;
+ struct adv_ec_platform_data *adv_ec_data;
+
+ adv_ec_data = devm_kzalloc(dev, sizeof(struct adv_ec_platform_data), GFP_KERNEL);
+ if (!adv_ec_data)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, adv_ec_data);
+ adv_ec_data->dev = dev;
+
+ ret = adv_ec_init_ec_data(adv_ec_data);
+ if (ret)
+ goto err_init_data;
+
+ ret = adv_ec_parse_prop(adv_ec_data);
+ if (ret)
+ goto err_prop;
+
+ /* check whether this EC has the following subdevices. */
+ for (i = 0; i < ARRAY_SIZE(adv_ec_sub_cells); i++) {
+ if (adv_ec_data->sub_dev_mask & BIT(i)) {
+ ret = mfd_add_hotplug_devices(dev, &adv_ec_sub_cells[i], 1);
+ dev_info(adv_ec_data->dev, "mfd_add_hotplug_devices[%d] %s\n", i,
+ adv_ec_sub_cells[i].name);
+ if (ret)
+ dev_err(dev, "failed to add %s subdevice: %d\n",
+ adv_ec_sub_cells[i].name, ret);
+ }
+ }
+
+ dev_info(adv_ec_data->dev, "Advantech EC probe done");
+
+ return 0;
+
+err_prop:
+ dev_err(dev, "failed to probe\n");
+
+err_init_data:
+ mutex_destroy(&adv_ec_data->lock);
+
+ dev_err(dev, "failed to init data\n");
+
+ return ret;
+}
+
+static int adv_ec_remove(struct platform_device *pdev)
+{
+ struct adv_ec_platform_data *adv_ec_data;
+
+ adv_ec_data = dev_get_drvdata(&pdev->dev);
+
+ mutex_destroy(&adv_ec_data->lock);
+
+ mfd_remove_devices(&pdev->dev);
+
+ return 0;
+}
+
+static const struct of_device_id adv_ec_of_match[] __maybe_unused = {
+ {
+ .compatible = "advantech,ahc1ec0",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, adv_ec_of_match);
+
+static const struct acpi_device_id adv_ec_acpi_match[] __maybe_unused = {
+ {"AHC1EC0", 0},
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, adv_ec_acpi_match);
+
+static struct platform_driver adv_ec_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = of_match_ptr(adv_ec_of_match),
+ .acpi_match_table = ACPI_PTR(adv_ec_acpi_match),
+ },
+ .probe = adv_ec_probe,
+ .remove = adv_ec_remove,
+};
+module_platform_driver(adv_ec_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_DESCRIPTION("Advantech Embedded Controller core driver.");
+MODULE_AUTHOR("Campion Kang <campion.kang@advantech.com.tw>");
+MODULE_AUTHOR("Jianfeng Dai <jianfeng.dai@advantech.com.cn>");
+MODULE_VERSION("1.0");
new file mode 100644
@@ -0,0 +1,276 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __LINUX_MFD_AHC1EC0_H
+#define __LINUX_MFD_AHC1EC0_H
+
+#include <linux/device.h>
+
+#define EC_COMMAND_PORT 0x29A /* EC I/O command port */
+#define EC_STATUS_PORT 0x299 /* EC I/O data port */
+
+#define EC_RETRY_UDELAY 200 /* EC command retry delay in microseconds */
+#define EC_MAX_TIMEOUT_COUNT 5000 /* EC command max retry count */
+#define EC_COMMAND_BIT_OBF 0x01 /* Bit 0 is for OBF ready (Output buffer full) */
+#define EC_COMMAND_BIT_IBF 0x02 /* Bit 1 is for IBF ready (Input buffer full) */
+
+/* Analog to digital converter command */
+#define EC_AD_INDEX_WRITE 0x15 /* Write ADC port number into index */
+#define EC_AD_LSB_READ 0x16 /* Read ADC LSB value from ADC port */
+#define EC_AD_MSB_READ 0x1F /* Read ADC MSB value from ADC port */
+
+/* Voltage device ID */
+#define EC_DID_SMBOEM0 0x28 /* SMBUS/I2C. Smbus channel 0 */
+#define EC_DID_CMOSBAT 0x50 /* CMOS coin battery voltage */
+#define EC_DID_CMOSBAT_X2 0x51 /* CMOS coin battery voltage*2 */
+#define EC_DID_CMOSBAT_X10 0x52 /* CMOS coin battery voltage*10 */
+#define EC_DID_5VS0 0x56 /* 5VS0 voltage */
+#define EC_DID_5VS0_X2 0x57 /* 5VS0 voltage*2 */
+#define EC_DID_5VS0_X10 0x58 /* 5VS0 voltage*10 */
+#define EC_DID_5VS5 0x59 /* 5VS5 voltage */
+#define EC_DID_5VS5_X2 0x5A /* 5VS5 voltage*2 */
+#define EC_DID_5VS5_X10 0x5B /* 5VS5 voltage*10 */
+#define EC_DID_12VS0 0x62 /* 12VS0 voltage */
+#define EC_DID_12VS0_X2 0x63 /* 12VS0 voltage*2 */
+#define EC_DID_12VS0_X10 0x64 /* 12VS0 voltage*10 */
+#define EC_DID_VCOREA 0x65 /* CPU A core voltage */
+#define EC_DID_VCOREA_X2 0x66 /* CPU A core voltage*2 */
+#define EC_DID_VCOREA_X10 0x67 /* CPU A core voltage*10 */
+#define EC_DID_VCOREB 0x68 /* CPU B core voltage */
+#define EC_DID_VCOREB_X2 0x69 /* CPU B core voltage*2 */
+#define EC_DID_VCOREB_X10 0x6A /* CPU B core voltage*10 */
+#define EC_DID_DC 0x6B /* ADC. onboard voltage */
+#define EC_DID_DC_X2 0x6C /* ADC. onboard voltage*2 */
+#define EC_DID_DC_X10 0x6D /* ADC. onboard voltage*10 */
+
+/* Current device ID */
+#define EC_DID_CURRENT 0x74
+
+/* ACPI commands */
+#define EC_ACPI_RAM_READ 0x80
+#define EC_ACPI_RAM_WRITE 0x81
+
+/*
+ * Dynamic control table commands
+ * The table includes HW pin number, Device ID, and Pin polarity
+ */
+#define EC_TBL_WRITE_ITEM 0x20
+#define EC_TBL_GET_PIN 0x21
+#define EC_TBL_GET_DEVID 0x22
+#define EC_MAX_TBL_NUM 32
+
+/* LED Device ID table */
+#define EC_DID_LED_RUN 0xE1
+#define EC_DID_LED_ERR 0xE2
+#define EC_DID_LED_SYS_RECOVERY 0xE3
+#define EC_DID_LED_D105_G 0xE4
+#define EC_DID_LED_D106_G 0xE5
+#define EC_DID_LED_D107_G 0xE6
+
+/* LED control HW RAM address 0xA0-0xAF */
+#define EC_HWRAM_LED_BASE_ADDR 0xA0
+#define EC_HWRAM_LED_PIN(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N))) // N:0-3
+#define EC_HWRAM_LED_CTRL_HIBYTE(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 1)
+#define EC_HWRAM_LED_CTRL_LOBYTE(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 2)
+#define EC_HWRAM_LED_DEVICE_ID(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 3)
+
+/* LED control bit */
+#define LED_CTRL_ENABLE_BIT() BIT(4)
+#define LED_CTRL_INTCTL_BIT() BIT(5)
+#define LED_CTRL_LEDBIT_MASK (0x03FF << 6)
+#define LED_CTRL_POLARITY_MASK (0x000F << 0)
+#define LED_CTRL_INTCTL_EXTERNAL 0
+#define LED_CTRL_INTCTL_INTERNAL 1
+
+#define LED_DISABLE 0x0
+#define LED_ON 0x1
+#define LED_FAST 0x3
+#define LED_NORMAL 0x5
+#define LED_SLOW 0x7
+#define LED_MANUAL 0xF
+
+#define LED_CTRL_LEDBIT_DISABLE 0x0000
+#define LED_CTRL_LEDBIT_ON 0x03FF
+#define LED_CTRL_LEDBIT_FAST 0x02AA
+#define LED_CTRL_LEDBIT_NORMAL 0x0333
+#define LED_CTRL_LEDBIT_SLOW 0x03E0
+
+/* Get the device name */
+#define AMI_ADVANTECH_BOARD_ID_LENGTH 32
+
+/*
+ * Advantech Embedded Controller watchdog commands
+ * EC can send multi-stage watchdog event. System can setup watchdog event
+ * independently to make up event sequence.
+ */
+#define EC_COMMANS_PORT_IBF_MASK 0x02
+#define EC_RESET_EVENT 0x04
+#define EC_WDT_START 0x28
+#define EC_WDT_STOP 0x29
+#define EC_WDT_RESET 0x2A
+#define EC_WDT_BOOTTMEWDT_STOP 0x2B
+
+#define EC_HW_RAM 0x89
+
+#define EC_EVENT_FLAG 0x57
+#define EC_ENABLE_DELAY_H 0x58
+#define EC_ENABLE_DELAY_L 0x59
+#define EC_POWER_BTN_TIME_H 0x5A
+#define EC_POWER_BTN_TIME_L 0x5B
+#define EC_RESET_DELAY_TIME_H 0x5E
+#define EC_RESET_DELAY_TIME_L 0x5F
+#define EC_PIN_DELAY_TIME_H 0x60
+#define EC_PIN_DELAY_TIME_L 0x61
+#define EC_SCI_DELAY_TIME_H 0x62
+#define EC_SCI_DELAY_TIME_L 0x63
+
+/* EC ACPI commands */
+#define EC_ACPI_DATA_READ 0x80
+#define EC_ACPI_DATA_WRITE 0x81
+
+/* Brightness ACPI Addr */
+#define BRIGHTNESS_ACPI_ADDR 0x50
+
+/* EC HW RAM commands */
+#define EC_HW_EXTEND_RAM_READ 0x86
+#define EC_HW_EXTEND_RAM_WRITE 0x87
+#define EC_HW_RAM_READ 0x88
+#define EC_HW_RAM_WRITE 0x89
+
+/* EC Smbus commands */
+#define EC_SMBUS_CHANNEL_SET 0x8A /* Set selector number (SMBUS channel) */
+#define EC_SMBUS_ENABLE_I2C 0x8C /* Enable channel I2C */
+#define EC_SMBUS_DISABLE_I2C 0x8D /* Disable channel I2C */
+
+/* Smbus transmit protocol */
+#define EC_SMBUS_PROTOCOL 0x00
+
+/* SMBUS status */
+#define EC_SMBUS_STATUS 0x01
+
+/* SMBUS device slave address (bit0 must be 0) */
+#define EC_SMBUS_SLV_ADDR 0x02
+
+/* SMBUS device command */
+#define EC_SMBUS_CMD 0x03
+
+/* 0x04-0x24 Data In read process, return data are stored in this address */
+#define EC_SMBUS_DATA 0x04
+
+#define EC_SMBUS_DAT_OFFSET(n) (EC_SMBUS_DATA + (n))
+
+/* SMBUS channel selector (0-4) */
+#define EC_SMBUS_CHANNEL 0x2B
+
+/* EC SMBUS transmit Protocol code */
+#define SMBUS_QUICK_WRITE 0x02 /* Write Quick Command */
+#define SMBUS_QUICK_READ 0x03 /* Read Quick Command */
+#define SMBUS_BYTE_SEND 0x04 /* Send Byte */
+#define SMBUS_BYTE_RECEIVE 0x05 /* Receive Byte */
+#define SMBUS_BYTE_WRITE 0x06 /* Write Byte */
+#define SMBUS_BYTE_READ 0x07 /* Read Byte */
+#define SMBUS_WORD_WRITE 0x08 /* Write Word */
+#define SMBUS_WORD_READ 0x09 /* Read Word */
+#define SMBUS_BLOCK_WRITE 0x0A /* Write Block */
+#define SMBUS_BLOCK_READ 0x0B /* Read Block */
+#define SMBUS_PROC_CALL 0x0C /* Process Call */
+#define SMBUS_BLOCK_PROC_CALL 0x0D /* Write Block-Read Block Process Call */
+#define SMBUS_I2C_READ_WRITE 0x0E /* I2C block Read-Write */
+#define SMBUS_I2C_WRITE_READ 0x0F /* I2C block Write-Read */
+
+/* GPIO control commands */
+#define EC_GPIO_INDEX_WRITE 0x10
+#define EC_GPIO_STATUS_READ 0x11
+#define EC_GPIO_STATUS_WRITE 0x12
+#define EC_GPIO_DIR_READ 0x1D
+#define EC_GPIO_DIR_WRITE 0x1E
+
+/* One Key Recovery commands */
+#define EC_ONE_KEY_FLAG 0x9C
+
+/* ASG OEM commands */
+#define EC_ASG_OEM 0xEA
+#define EC_ASG_OEM_READ 0x00
+#define EC_ASG_OEM_WRITE 0x01
+#define EC_OEM_POWER_STATUS_VIN1 0X10
+#define EC_OEM_POWER_STATUS_VIN2 0X11
+#define EC_OEM_POWER_STATUS_BAT1 0X12
+#define EC_OEM_POWER_STATUS_BAT2 0X13
+
+/* GPIO DEVICE ID */
+#define EC_DID_ALTGPIO_0 0x10 /* 0x10 AltGpio0 User define gpio */
+#define EC_DID_ALTGPIO_1 0x11 /* 0x11 AltGpio1 User define gpio */
+#define EC_DID_ALTGPIO_2 0x12 /* 0x12 AltGpio2 User define gpio */
+#define EC_DID_ALTGPIO_3 0x13 /* 0x13 AltGpio3 User define gpio */
+#define EC_DID_ALTGPIO_4 0x14 /* 0x14 AltGpio4 User define gpio */
+#define EC_DID_ALTGPIO_5 0x15 /* 0x15 AltGpio5 User define gpio */
+#define EC_DID_ALTGPIO_6 0x16 /* 0x16 AltGpio6 User define gpio */
+#define EC_DID_ALTGPIO_7 0x17 /* 0x17 AltGpio7 User define gpio */
+
+/* Lmsensor Chip Register */
+#define NSLM96163_CHANNEL 0x02
+
+/* NS_LM96163 address 0x98 */
+#define NSLM96163_ADDR 0x98
+
+/* LM96163 index(0x00) Local Temperature (Signed MSB) */
+#define NSLM96163_LOC_TEMP 0x00
+
+/* HWMON registers */
+#define INA266_REG_VOLTAGE 0x02 /* 1.25mV */
+#define INA266_REG_POWER 0x03 /* 25mW */
+#define INA266_REG_CURRENT 0x04 /* 1mA */
+
+struct ec_hw_pin_table {
+ unsigned int vbat[2];
+ unsigned int v5[2];
+ unsigned int v12[2];
+ unsigned int vcore[2];
+ unsigned int vdc[2];
+ unsigned int ec_current[2];
+ unsigned int power[2];
+};
+
+struct ec_dynamic_table {
+ unsigned char device_id;
+ unsigned char hw_pin_num;
+};
+
+struct ec_smbuso_em0 {
+ unsigned char hw_pin_num;
+};
+
+struct pled_hw_pin_tbl {
+ unsigned int pled[6];
+};
+
+struct adv_ec_platform_data {
+ char *bios_product_name;
+ int sub_dev_nb;
+ u32 sub_dev_mask;
+ struct mutex lock;
+ struct device *dev;
+ struct class *adv_ec_class;
+
+ struct ec_dynamic_table *dym_tbl;
+};
+
+int read_ad_value(struct adv_ec_platform_data *adv_ec_data, unsigned char hwpin,
+ unsigned char multi);
+int read_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
+ unsigned char *pvalue);
+int write_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
+ unsigned char value);
+int read_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
+ unsigned char *data);
+int write_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
+ unsigned char data);
+int write_hwram_command(struct adv_ec_platform_data *adv_ec_data, unsigned char data);
+int read_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+ unsigned char *pvalue);
+int write_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+ unsigned char value);
+int read_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+ unsigned char *pvalue);
+int write_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+ unsigned char value);
+
+#endif /* __LINUX_MFD_AHC1EC0_H */