Message ID | 1306159610-10909-2-git-send-email-colin.king@canonical.com |
---|---|
State | New |
Headers | show |
On 05/23/2011 07:06 AM, Colin King wrote: > From: Colin Ian King <colin.king@canonical.com> > > Add support to debug S3 early resume by flashing the keyboard > LEDs three times in the realmode path. This is useful to allow > one to determine if S3 hangs occur in the BIOS or during the early > resume phase. > > Add kernel parameter acpi_sleep=s3_leds to enable the s3 debugging > option. This can also be enabled by writing 8 to > /proc/sys/kernel/acpi_video_flags. > > Signed-off-by: Colin Ian King <colin.king@canonical.com> > --- > Documentation/kernel-parameters.txt | 5 ++++- > arch/x86/kernel/acpi/realmode/wakemain.c | 27 +++++++++++++++++++++++++++ > arch/x86/kernel/acpi/sleep.c | 2 ++ > 3 files changed, 33 insertions(+), 1 deletions(-) > > diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt > index cc85a92..9f36ff4 100644 > --- a/Documentation/kernel-parameters.txt > +++ b/Documentation/kernel-parameters.txt > @@ -244,12 +244,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted. > For broken nForce2 BIOS resulting in XT-PIC timer. > > acpi_sleep= [HW,ACPI] Sleep options > - Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, > + Format: { s3_bios, s3_mode, s3_beep, s3_leds, s4_nohwsig, > old_ordering, s4_nonvs, sci_force_enable } > See Documentation/power/video.txt for information on > s3_bios and s3_mode. > s3_beep is for debugging; it makes the PC's speaker beep > as soon as the kernel's real-mode entry point is called. > + s3_leds is for debugging; it flashes the keyboard LEDs > + 3 times as soon as the kernel's real-mode entry point is > + called. > s4_nohwsig prevents ACPI hardware signature from being > used during resume from hibernation. > old_ordering causes the ACPI 1.0 ordering of the _PTS > diff --git a/arch/x86/kernel/acpi/realmode/wakemain.c b/arch/x86/kernel/acpi/realmode/wakemain.c > index 883962d..1d108be 100644 > --- a/arch/x86/kernel/acpi/realmode/wakemain.c > +++ b/arch/x86/kernel/acpi/realmode/wakemain.c > @@ -61,6 +61,30 @@ static void send_morse(const char *pattern) > } > } > > +#define I8042_STATUS_REG 0x64 > +#define I8042_DATA_REG 0x60 > +#define I8042_SET_LED_BITS 0xed > +#define I8042_STR_IBF 0x02 > + > +static void flash_keyboard_leds(void) > +{ > + int i; > + unsigned char leds = 7; > + > + /* Flash keyboard LEDs 3 times */ > + for (i = 0; i < 6; i++) { > + while (inb(I8042_STATUS_REG) & I8042_STR_IBF) > + ; > + outb(I8042_SET_LED_BITS, I8042_DATA_REG); > + while (inb(I8042_STATUS_REG) & I8042_STR_IBF) > + ; > + outb(leds, I8042_DATA_REG); > + leds ^= 7; > + udelay(500000); > + } > +} > + > + > void main(void) > { > /* Kill machine if structures are wrong */ > @@ -78,4 +102,7 @@ void main(void) > probe_cards(0); > set_mode(wakeup_header.video_mode); > } > + > + if (wakeup_header.realmode_flags & 8) > + flash_keyboard_leds(); I do wish this little bit used an enum or definition instead of the hard coded 8 but since rest of the code does the same just consider it as me whining about style > } > diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c > index ff93bc1..182617c 100644 > --- a/arch/x86/kernel/acpi/sleep.c > +++ b/arch/x86/kernel/acpi/sleep.c > @@ -109,6 +109,8 @@ static int __init acpi_sleep_setup(char *str) > acpi_realmode_flags |= 2; > if (strncmp(str, "s3_beep", 7) == 0) > acpi_realmode_flags |= 4; > + if (strncmp(str, "s3_leds", 7) == 0) > + acpi_realmode_flags |= 8; > #ifdef CONFIG_HIBERNATION > if (strncmp(str, "s4_nohwsig", 10) == 0) > acpi_no_s4_hw_signature(); This is really nice to have Colin, thanks Acked-by: John Johansen <john.johansen@canonical.com>
On 23.05.2011 16:06, Colin King wrote: > From: Colin Ian King<colin.king@canonical.com> > > Add support to debug S3 early resume by flashing the keyboard > LEDs three times in the realmode path. This is useful to allow > one to determine if S3 hangs occur in the BIOS or during the early > resume phase. > > Add kernel parameter acpi_sleep=s3_leds to enable the s3 debugging > option. This can also be enabled by writing 8 to > /proc/sys/kernel/acpi_video_flags. > > Signed-off-by: Colin Ian King<colin.king@canonical.com> > --- > Documentation/kernel-parameters.txt | 5 ++++- > arch/x86/kernel/acpi/realmode/wakemain.c | 27 +++++++++++++++++++++++++++ > arch/x86/kernel/acpi/sleep.c | 2 ++ > 3 files changed, 33 insertions(+), 1 deletions(-) > > diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt > index cc85a92..9f36ff4 100644 > --- a/Documentation/kernel-parameters.txt > +++ b/Documentation/kernel-parameters.txt > @@ -244,12 +244,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted. > For broken nForce2 BIOS resulting in XT-PIC timer. > > acpi_sleep= [HW,ACPI] Sleep options > - Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, > + Format: { s3_bios, s3_mode, s3_beep, s3_leds, s4_nohwsig, > old_ordering, s4_nonvs, sci_force_enable } > See Documentation/power/video.txt for information on > s3_bios and s3_mode. > s3_beep is for debugging; it makes the PC's speaker beep > as soon as the kernel's real-mode entry point is called. > + s3_leds is for debugging; it flashes the keyboard LEDs > + 3 times as soon as the kernel's real-mode entry point is > + called. > s4_nohwsig prevents ACPI hardware signature from being > used during resume from hibernation. > old_ordering causes the ACPI 1.0 ordering of the _PTS > diff --git a/arch/x86/kernel/acpi/realmode/wakemain.c b/arch/x86/kernel/acpi/realmode/wakemain.c > index 883962d..1d108be 100644 > --- a/arch/x86/kernel/acpi/realmode/wakemain.c > +++ b/arch/x86/kernel/acpi/realmode/wakemain.c > @@ -61,6 +61,30 @@ static void send_morse(const char *pattern) > } > } > > +#define I8042_STATUS_REG 0x64 > +#define I8042_DATA_REG 0x60 > +#define I8042_SET_LED_BITS 0xed > +#define I8042_STR_IBF 0x02 > + > +static void flash_keyboard_leds(void) > +{ > + int i; > + unsigned char leds = 7; > + > + /* Flash keyboard LEDs 3 times */ > + for (i = 0; i< 6; i++) { > + while (inb(I8042_STATUS_REG)& I8042_STR_IBF) > + ; > + outb(I8042_SET_LED_BITS, I8042_DATA_REG); > + while (inb(I8042_STATUS_REG)& I8042_STR_IBF) > + ; > + outb(leds, I8042_DATA_REG); > + leds ^= 7; > + udelay(500000); > + } > +} > + > + > void main(void) > { > /* Kill machine if structures are wrong */ > @@ -78,4 +102,7 @@ void main(void) > probe_cards(0); > set_mode(wakeup_header.video_mode); > } > + > + if (wakeup_header.realmode_flags& 8) > + flash_keyboard_leds(); > } > diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c > index ff93bc1..182617c 100644 > --- a/arch/x86/kernel/acpi/sleep.c > +++ b/arch/x86/kernel/acpi/sleep.c > @@ -109,6 +109,8 @@ static int __init acpi_sleep_setup(char *str) > acpi_realmode_flags |= 2; > if (strncmp(str, "s3_beep", 7) == 0) > acpi_realmode_flags |= 4; > + if (strncmp(str, "s3_leds", 7) == 0) > + acpi_realmode_flags |= 8; > #ifdef CONFIG_HIBERNATION > if (strncmp(str, "s4_nohwsig", 10) == 0) > acpi_no_s4_hw_signature(); Agree with John. Probably there are some definitions for the previous three bits and adding the bit there would help to detect when upstream starts to use it. But otherwise nice and good to have. :) Acked (though there is not really one needed for O yet) -Stefan
On Mon, 2011-05-23 at 16:29 -0700, John Johansen wrote: > On 05/23/2011 07:06 AM, Colin King wrote: > > From: Colin Ian King <colin.king@canonical.com> > > > > Add support to debug S3 early resume by flashing the keyboard > > LEDs three times in the realmode path. This is useful to allow > > one to determine if S3 hangs occur in the BIOS or during the early > > resume phase. > > > > Add kernel parameter acpi_sleep=s3_leds to enable the s3 debugging > > option. This can also be enabled by writing 8 to > > /proc/sys/kernel/acpi_video_flags. > > > > Signed-off-by: Colin Ian King <colin.king@canonical.com> > > --- > > Documentation/kernel-parameters.txt | 5 ++++- > > arch/x86/kernel/acpi/realmode/wakemain.c | 27 +++++++++++++++++++++++++++ > > arch/x86/kernel/acpi/sleep.c | 2 ++ > > 3 files changed, 33 insertions(+), 1 deletions(-) > > > > diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt > > index cc85a92..9f36ff4 100644 > > --- a/Documentation/kernel-parameters.txt > > +++ b/Documentation/kernel-parameters.txt > > @@ -244,12 +244,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted. > > For broken nForce2 BIOS resulting in XT-PIC timer. > > > > acpi_sleep= [HW,ACPI] Sleep options > > - Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, > > + Format: { s3_bios, s3_mode, s3_beep, s3_leds, s4_nohwsig, > > old_ordering, s4_nonvs, sci_force_enable } > > See Documentation/power/video.txt for information on > > s3_bios and s3_mode. > > s3_beep is for debugging; it makes the PC's speaker beep > > as soon as the kernel's real-mode entry point is called. > > + s3_leds is for debugging; it flashes the keyboard LEDs > > + 3 times as soon as the kernel's real-mode entry point is > > + called. > > s4_nohwsig prevents ACPI hardware signature from being > > used during resume from hibernation. > > old_ordering causes the ACPI 1.0 ordering of the _PTS > > diff --git a/arch/x86/kernel/acpi/realmode/wakemain.c b/arch/x86/kernel/acpi/realmode/wakemain.c > > index 883962d..1d108be 100644 > > --- a/arch/x86/kernel/acpi/realmode/wakemain.c > > +++ b/arch/x86/kernel/acpi/realmode/wakemain.c > > @@ -61,6 +61,30 @@ static void send_morse(const char *pattern) > > } > > } > > > > +#define I8042_STATUS_REG 0x64 > > +#define I8042_DATA_REG 0x60 > > +#define I8042_SET_LED_BITS 0xed > > +#define I8042_STR_IBF 0x02 > > + > > +static void flash_keyboard_leds(void) > > +{ > > + int i; > > + unsigned char leds = 7; > > + > > + /* Flash keyboard LEDs 3 times */ > > + for (i = 0; i < 6; i++) { > > + while (inb(I8042_STATUS_REG) & I8042_STR_IBF) > > + ; > > + outb(I8042_SET_LED_BITS, I8042_DATA_REG); > > + while (inb(I8042_STATUS_REG) & I8042_STR_IBF) > > + ; > > + outb(leds, I8042_DATA_REG); > > + leds ^= 7; > > + udelay(500000); > > + } > > +} > > + > > + > > void main(void) > > { > > /* Kill machine if structures are wrong */ > > @@ -78,4 +102,7 @@ void main(void) > > probe_cards(0); > > set_mode(wakeup_header.video_mode); > > } > > + > > + if (wakeup_header.realmode_flags & 8) > > + flash_keyboard_leds(); > I do wish this little bit used an enum or definition instead of the hard > coded 8 but since rest of the code does the same just consider it as > me whining about style I agree. It's lame that the original code is full of this hard coded values rather than some kind of enum or #define as it makes subsequent patches (such as mine) inherit this same lameness. I suspect we need to fix the original code first rather than enforce it on this patch. > > > } > > diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c > > index ff93bc1..182617c 100644 > > --- a/arch/x86/kernel/acpi/sleep.c > > +++ b/arch/x86/kernel/acpi/sleep.c > > @@ -109,6 +109,8 @@ static int __init acpi_sleep_setup(char *str) > > acpi_realmode_flags |= 2; > > if (strncmp(str, "s3_beep", 7) == 0) > > acpi_realmode_flags |= 4; > > + if (strncmp(str, "s3_leds", 7) == 0) > > + acpi_realmode_flags |= 8; > > #ifdef CONFIG_HIBERNATION > > if (strncmp(str, "s4_nohwsig", 10) == 0) > > acpi_no_s4_hw_signature(); > > This is really nice to have Colin, thanks > > Acked-by: John Johansen <john.johansen@canonical.com>
On Tue, 2011-05-24 at 10:19 +0200, Stefan Bader wrote: > On 23.05.2011 16:06, Colin King wrote: > > From: Colin Ian King<colin.king@canonical.com> > > > > Add support to debug S3 early resume by flashing the keyboard > > LEDs three times in the realmode path. This is useful to allow > > one to determine if S3 hangs occur in the BIOS or during the early > > resume phase. > > > > Add kernel parameter acpi_sleep=s3_leds to enable the s3 debugging > > option. This can also be enabled by writing 8 to > > /proc/sys/kernel/acpi_video_flags. > > > > Signed-off-by: Colin Ian King<colin.king@canonical.com> > > --- > > Documentation/kernel-parameters.txt | 5 ++++- > > arch/x86/kernel/acpi/realmode/wakemain.c | 27 +++++++++++++++++++++++++++ > > arch/x86/kernel/acpi/sleep.c | 2 ++ > > 3 files changed, 33 insertions(+), 1 deletions(-) > > > > diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt > > index cc85a92..9f36ff4 100644 > > --- a/Documentation/kernel-parameters.txt > > +++ b/Documentation/kernel-parameters.txt > > @@ -244,12 +244,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted. > > For broken nForce2 BIOS resulting in XT-PIC timer. > > > > acpi_sleep= [HW,ACPI] Sleep options > > - Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, > > + Format: { s3_bios, s3_mode, s3_beep, s3_leds, s4_nohwsig, > > old_ordering, s4_nonvs, sci_force_enable } > > See Documentation/power/video.txt for information on > > s3_bios and s3_mode. > > s3_beep is for debugging; it makes the PC's speaker beep > > as soon as the kernel's real-mode entry point is called. > > + s3_leds is for debugging; it flashes the keyboard LEDs > > + 3 times as soon as the kernel's real-mode entry point is > > + called. > > s4_nohwsig prevents ACPI hardware signature from being > > used during resume from hibernation. > > old_ordering causes the ACPI 1.0 ordering of the _PTS > > diff --git a/arch/x86/kernel/acpi/realmode/wakemain.c b/arch/x86/kernel/acpi/realmode/wakemain.c > > index 883962d..1d108be 100644 > > --- a/arch/x86/kernel/acpi/realmode/wakemain.c > > +++ b/arch/x86/kernel/acpi/realmode/wakemain.c > > @@ -61,6 +61,30 @@ static void send_morse(const char *pattern) > > } > > } > > > > +#define I8042_STATUS_REG 0x64 > > +#define I8042_DATA_REG 0x60 > > +#define I8042_SET_LED_BITS 0xed > > +#define I8042_STR_IBF 0x02 > > + > > +static void flash_keyboard_leds(void) > > +{ > > + int i; > > + unsigned char leds = 7; > > + > > + /* Flash keyboard LEDs 3 times */ > > + for (i = 0; i< 6; i++) { > > + while (inb(I8042_STATUS_REG)& I8042_STR_IBF) > > + ; > > + outb(I8042_SET_LED_BITS, I8042_DATA_REG); > > + while (inb(I8042_STATUS_REG)& I8042_STR_IBF) > > + ; > > + outb(leds, I8042_DATA_REG); > > + leds ^= 7; > > + udelay(500000); > > + } > > +} > > + > > + > > void main(void) > > { > > /* Kill machine if structures are wrong */ > > @@ -78,4 +102,7 @@ void main(void) > > probe_cards(0); > > set_mode(wakeup_header.video_mode); > > } > > + > > + if (wakeup_header.realmode_flags& 8) > > + flash_keyboard_leds(); > > } > > diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c > > index ff93bc1..182617c 100644 > > --- a/arch/x86/kernel/acpi/sleep.c > > +++ b/arch/x86/kernel/acpi/sleep.c > > @@ -109,6 +109,8 @@ static int __init acpi_sleep_setup(char *str) > > acpi_realmode_flags |= 2; > > if (strncmp(str, "s3_beep", 7) == 0) > > acpi_realmode_flags |= 4; > > + if (strncmp(str, "s3_leds", 7) == 0) > > + acpi_realmode_flags |= 8; > > #ifdef CONFIG_HIBERNATION > > if (strncmp(str, "s4_nohwsig", 10) == 0) > > acpi_no_s4_hw_signature(); > Agree with John. Probably there are some definitions for the previous three bits > and adding the bit there would help to detect when upstream starts to use it. I'm being dull here, and not understanding what you are saying. Do you mind explaining this a little more? > But otherwise nice and good to have. :) > > Acked (though there is not really one needed for O yet) > > -Stefan >
Applied to Oneiric master-next. Thanks, Leann On Mon, 2011-05-23 at 15:06 +0100, Colin King wrote: > From: Colin Ian King <colin.king@canonical.com> > > Add support to debug S3 early resume by flashing the keyboard > LEDs three times in the realmode path. This is useful to allow > one to determine if S3 hangs occur in the BIOS or during the early > resume phase. > > Add kernel parameter acpi_sleep=s3_leds to enable the s3 debugging > option. This can also be enabled by writing 8 to > /proc/sys/kernel/acpi_video_flags. > > Signed-off-by: Colin Ian King <colin.king@canonical.com> > --- > Documentation/kernel-parameters.txt | 5 ++++- > arch/x86/kernel/acpi/realmode/wakemain.c | 27 +++++++++++++++++++++++++++ > arch/x86/kernel/acpi/sleep.c | 2 ++ > 3 files changed, 33 insertions(+), 1 deletions(-) > > diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt > index cc85a92..9f36ff4 100644 > --- a/Documentation/kernel-parameters.txt > +++ b/Documentation/kernel-parameters.txt > @@ -244,12 +244,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted. > For broken nForce2 BIOS resulting in XT-PIC timer. > > acpi_sleep= [HW,ACPI] Sleep options > - Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, > + Format: { s3_bios, s3_mode, s3_beep, s3_leds, s4_nohwsig, > old_ordering, s4_nonvs, sci_force_enable } > See Documentation/power/video.txt for information on > s3_bios and s3_mode. > s3_beep is for debugging; it makes the PC's speaker beep > as soon as the kernel's real-mode entry point is called. > + s3_leds is for debugging; it flashes the keyboard LEDs > + 3 times as soon as the kernel's real-mode entry point is > + called. > s4_nohwsig prevents ACPI hardware signature from being > used during resume from hibernation. > old_ordering causes the ACPI 1.0 ordering of the _PTS > diff --git a/arch/x86/kernel/acpi/realmode/wakemain.c b/arch/x86/kernel/acpi/realmode/wakemain.c > index 883962d..1d108be 100644 > --- a/arch/x86/kernel/acpi/realmode/wakemain.c > +++ b/arch/x86/kernel/acpi/realmode/wakemain.c > @@ -61,6 +61,30 @@ static void send_morse(const char *pattern) > } > } > > +#define I8042_STATUS_REG 0x64 > +#define I8042_DATA_REG 0x60 > +#define I8042_SET_LED_BITS 0xed > +#define I8042_STR_IBF 0x02 > + > +static void flash_keyboard_leds(void) > +{ > + int i; > + unsigned char leds = 7; > + > + /* Flash keyboard LEDs 3 times */ > + for (i = 0; i < 6; i++) { > + while (inb(I8042_STATUS_REG) & I8042_STR_IBF) > + ; > + outb(I8042_SET_LED_BITS, I8042_DATA_REG); > + while (inb(I8042_STATUS_REG) & I8042_STR_IBF) > + ; > + outb(leds, I8042_DATA_REG); > + leds ^= 7; > + udelay(500000); > + } > +} > + > + > void main(void) > { > /* Kill machine if structures are wrong */ > @@ -78,4 +102,7 @@ void main(void) > probe_cards(0); > set_mode(wakeup_header.video_mode); > } > + > + if (wakeup_header.realmode_flags & 8) > + flash_keyboard_leds(); > } > diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c > index ff93bc1..182617c 100644 > --- a/arch/x86/kernel/acpi/sleep.c > +++ b/arch/x86/kernel/acpi/sleep.c > @@ -109,6 +109,8 @@ static int __init acpi_sleep_setup(char *str) > acpi_realmode_flags |= 2; > if (strncmp(str, "s3_beep", 7) == 0) > acpi_realmode_flags |= 4; > + if (strncmp(str, "s3_leds", 7) == 0) > + acpi_realmode_flags |= 8; > #ifdef CONFIG_HIBERNATION > if (strncmp(str, "s4_nohwsig", 10) == 0) > acpi_no_s4_hw_signature(); > -- > 1.7.0.4 > >
On 25.05.2011 15:38, Colin Ian King wrote: > On Tue, 2011-05-24 at 10:19 +0200, Stefan Bader wrote: >> On 23.05.2011 16:06, Colin King wrote: >>> From: Colin Ian King<colin.king@canonical.com> >>> >>> Add support to debug S3 early resume by flashing the keyboard >>> LEDs three times in the realmode path. This is useful to allow >>> one to determine if S3 hangs occur in the BIOS or during the early >>> resume phase. >>> >>> Add kernel parameter acpi_sleep=s3_leds to enable the s3 debugging >>> option. This can also be enabled by writing 8 to >>> /proc/sys/kernel/acpi_video_flags. >>> >>> Signed-off-by: Colin Ian King<colin.king@canonical.com> >>> --- >>> Documentation/kernel-parameters.txt | 5 ++++- >>> arch/x86/kernel/acpi/realmode/wakemain.c | 27 +++++++++++++++++++++++++++ >>> arch/x86/kernel/acpi/sleep.c | 2 ++ >>> 3 files changed, 33 insertions(+), 1 deletions(-) >>> >>> diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt >>> index cc85a92..9f36ff4 100644 >>> --- a/Documentation/kernel-parameters.txt >>> +++ b/Documentation/kernel-parameters.txt >>> @@ -244,12 +244,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted. >>> For broken nForce2 BIOS resulting in XT-PIC timer. >>> >>> acpi_sleep= [HW,ACPI] Sleep options >>> - Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, >>> + Format: { s3_bios, s3_mode, s3_beep, s3_leds, s4_nohwsig, >>> old_ordering, s4_nonvs, sci_force_enable } >>> See Documentation/power/video.txt for information on >>> s3_bios and s3_mode. >>> s3_beep is for debugging; it makes the PC's speaker beep >>> as soon as the kernel's real-mode entry point is called. >>> + s3_leds is for debugging; it flashes the keyboard LEDs >>> + 3 times as soon as the kernel's real-mode entry point is >>> + called. >>> s4_nohwsig prevents ACPI hardware signature from being >>> used during resume from hibernation. >>> old_ordering causes the ACPI 1.0 ordering of the _PTS >>> diff --git a/arch/x86/kernel/acpi/realmode/wakemain.c b/arch/x86/kernel/acpi/realmode/wakemain.c >>> index 883962d..1d108be 100644 >>> --- a/arch/x86/kernel/acpi/realmode/wakemain.c >>> +++ b/arch/x86/kernel/acpi/realmode/wakemain.c >>> @@ -61,6 +61,30 @@ static void send_morse(const char *pattern) >>> } >>> } >>> >>> +#define I8042_STATUS_REG 0x64 >>> +#define I8042_DATA_REG 0x60 >>> +#define I8042_SET_LED_BITS 0xed >>> +#define I8042_STR_IBF 0x02 >>> + >>> +static void flash_keyboard_leds(void) >>> +{ >>> + int i; >>> + unsigned char leds = 7; >>> + >>> + /* Flash keyboard LEDs 3 times */ >>> + for (i = 0; i< 6; i++) { >>> + while (inb(I8042_STATUS_REG)& I8042_STR_IBF) >>> + ; >>> + outb(I8042_SET_LED_BITS, I8042_DATA_REG); >>> + while (inb(I8042_STATUS_REG)& I8042_STR_IBF) >>> + ; >>> + outb(leds, I8042_DATA_REG); >>> + leds ^= 7; >>> + udelay(500000); >>> + } >>> +} >>> + >>> + >>> void main(void) >>> { >>> /* Kill machine if structures are wrong */ >>> @@ -78,4 +102,7 @@ void main(void) >>> probe_cards(0); >>> set_mode(wakeup_header.video_mode); >>> } >>> + >>> + if (wakeup_header.realmode_flags& 8) >>> + flash_keyboard_leds(); >>> } >>> diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c >>> index ff93bc1..182617c 100644 >>> --- a/arch/x86/kernel/acpi/sleep.c >>> +++ b/arch/x86/kernel/acpi/sleep.c >>> @@ -109,6 +109,8 @@ static int __init acpi_sleep_setup(char *str) >>> acpi_realmode_flags |= 2; >>> if (strncmp(str, "s3_beep", 7) == 0) >>> acpi_realmode_flags |= 4; >>> + if (strncmp(str, "s3_leds", 7) == 0) >>> + acpi_realmode_flags |= 8; >>> #ifdef CONFIG_HIBERNATION >>> if (strncmp(str, "s4_nohwsig", 10) == 0) >>> acpi_no_s4_hw_signature(); >> Agree with John. Probably there are some definitions for the previous three bits >> and adding the bit there would help to detect when upstream starts to use it. > > I'm being dull here, and not understanding what you are saying. Do you > mind explaining this a little more? > No. Well, _if_ they had used defines (which you told us they have not), you could have used the next bit. And _if_ someone else does use the same patches collide (which they will not because there is no nice code to base on) >> But otherwise nice and good to have. :) >> >> Acked (though there is not really one needed for O yet) >> >> -Stefan >> > >
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index cc85a92..9f36ff4 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -244,12 +244,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted. For broken nForce2 BIOS resulting in XT-PIC timer. acpi_sleep= [HW,ACPI] Sleep options - Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, + Format: { s3_bios, s3_mode, s3_beep, s3_leds, s4_nohwsig, old_ordering, s4_nonvs, sci_force_enable } See Documentation/power/video.txt for information on s3_bios and s3_mode. s3_beep is for debugging; it makes the PC's speaker beep as soon as the kernel's real-mode entry point is called. + s3_leds is for debugging; it flashes the keyboard LEDs + 3 times as soon as the kernel's real-mode entry point is + called. s4_nohwsig prevents ACPI hardware signature from being used during resume from hibernation. old_ordering causes the ACPI 1.0 ordering of the _PTS diff --git a/arch/x86/kernel/acpi/realmode/wakemain.c b/arch/x86/kernel/acpi/realmode/wakemain.c index 883962d..1d108be 100644 --- a/arch/x86/kernel/acpi/realmode/wakemain.c +++ b/arch/x86/kernel/acpi/realmode/wakemain.c @@ -61,6 +61,30 @@ static void send_morse(const char *pattern) } } +#define I8042_STATUS_REG 0x64 +#define I8042_DATA_REG 0x60 +#define I8042_SET_LED_BITS 0xed +#define I8042_STR_IBF 0x02 + +static void flash_keyboard_leds(void) +{ + int i; + unsigned char leds = 7; + + /* Flash keyboard LEDs 3 times */ + for (i = 0; i < 6; i++) { + while (inb(I8042_STATUS_REG) & I8042_STR_IBF) + ; + outb(I8042_SET_LED_BITS, I8042_DATA_REG); + while (inb(I8042_STATUS_REG) & I8042_STR_IBF) + ; + outb(leds, I8042_DATA_REG); + leds ^= 7; + udelay(500000); + } +} + + void main(void) { /* Kill machine if structures are wrong */ @@ -78,4 +102,7 @@ void main(void) probe_cards(0); set_mode(wakeup_header.video_mode); } + + if (wakeup_header.realmode_flags & 8) + flash_keyboard_leds(); } diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index ff93bc1..182617c 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -109,6 +109,8 @@ static int __init acpi_sleep_setup(char *str) acpi_realmode_flags |= 2; if (strncmp(str, "s3_beep", 7) == 0) acpi_realmode_flags |= 4; + if (strncmp(str, "s3_leds", 7) == 0) + acpi_realmode_flags |= 8; #ifdef CONFIG_HIBERNATION if (strncmp(str, "s4_nohwsig", 10) == 0) acpi_no_s4_hw_signature();