@@ -5010,7 +5010,6 @@ F: arch/alpha/kernel/srm_env.c
STABLE BRANCH
M: Greg Kroah-Hartman <greg@kroah.com>
-M: Chris Wright <chrisw@sous-sol.org>
L: stable@kernel.org
S: Maintained
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 32
-EXTRAVERSION = .38+drm33.17
+EXTRAVERSION = .39+drm33.17
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
@@ -1850,7 +1850,8 @@ ia64_mca_cpu_init(void *cpu_data)
data = mca_bootmem();
first_time = 0;
} else
- data = __get_free_pages(GFP_KERNEL, get_order(sz));
+ data = (void *)__get_free_pages(GFP_KERNEL,
+ get_order(sz));
if (!data)
panic("Could not allocate MCA memory for cpu %d\n",
cpu);
@@ -517,7 +517,7 @@ tioca_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
* use the GART mapped mode.
*/
static u64
-tioca_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count, int dma_flags)
+tioca_dma_map(struct pci_dev *pdev, unsigned long paddr, size_t byte_count, int dma_flags)
{
u64 mapaddr;
@@ -81,11 +81,15 @@
#define MSR_IA32_MC0_ADDR 0x00000402
#define MSR_IA32_MC0_MISC 0x00000403
+#define MSR_AMD64_MC0_MASK 0xc0010044
+
#define MSR_IA32_MCx_CTL(x) (MSR_IA32_MC0_CTL + 4*(x))
#define MSR_IA32_MCx_STATUS(x) (MSR_IA32_MC0_STATUS + 4*(x))
#define MSR_IA32_MCx_ADDR(x) (MSR_IA32_MC0_ADDR + 4*(x))
#define MSR_IA32_MCx_MISC(x) (MSR_IA32_MC0_MISC + 4*(x))
+#define MSR_AMD64_MCx_MASK(x) (MSR_AMD64_MC0_MASK + (x))
+
/* These are consecutive and not in the normal 4er MCE bank block */
#define MSR_IA32_MC0_CTL2 0x00000280
#define MSR_IA32_MCx_CTL2(x) (MSR_IA32_MC0_CTL2 + (x))
@@ -1029,4 +1029,23 @@ unsigned long calc_aperfmperf_ratio(struct aperfmperf *old,
return ratio;
}
+/*
+ * AMD errata checking
+ */
+#ifdef CONFIG_CPU_SUP_AMD
+extern const int amd_erratum_400[];
+extern bool cpu_has_amd_erratum(const int *);
+
+#define AMD_LEGACY_ERRATUM(...) { -1, __VA_ARGS__, 0 }
+#define AMD_OSVW_ERRATUM(osvw_id, ...) { osvw_id, __VA_ARGS__, 0 }
+#define AMD_MODEL_RANGE(f, m_start, s_start, m_end, s_end) \
+ ((f << 24) | (m_start << 16) | (s_start << 12) | (m_end << 4) | (s_end))
+#define AMD_MODEL_RANGE_FAMILY(range) (((range) >> 24) & 0xff)
+#define AMD_MODEL_RANGE_START(range) (((range) >> 12) & 0xfff)
+#define AMD_MODEL_RANGE_END(range) ((range) & 0xfff)
+
+#else
+#define cpu_has_amd_erratum(x) (false)
+#endif /* CONFIG_CPU_SUP_AMD */
+
#endif /* _ASM_X86_PROCESSOR_H */
@@ -566,6 +566,29 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
}
}
#endif
+
+ /* As a rule processors have APIC timer running in deep C states */
+ if (c->x86 >= 0xf && !cpu_has_amd_erratum(amd_erratum_400))
+ set_cpu_cap(c, X86_FEATURE_ARAT);
+
+ /*
+ * Disable GART TLB Walk Errors on Fam10h. We do this here
+ * because this is always needed when GART is enabled, even in a
+ * kernel which has no MCE support built in.
+ */
+ if (c->x86 == 0x10) {
+ /*
+ * BIOS should disable GartTlbWlk Errors themself. If
+ * it doesn't do it here as suggested by the BKDG.
+ *
+ * Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=33012
+ */
+ u64 mask;
+
+ rdmsrl(MSR_AMD64_MCx_MASK(4), mask);
+ mask |= (1 << 10);
+ wrmsrl(MSR_AMD64_MCx_MASK(4), mask);
+ }
}
#ifdef CONFIG_X86_32
@@ -610,3 +633,68 @@ static const struct cpu_dev __cpuinitconst amd_cpu_dev = {
};
cpu_dev_register(amd_cpu_dev);
+
+/*
+ * AMD errata checking
+ *
+ * Errata are defined as arrays of ints using the AMD_LEGACY_ERRATUM() or
+ * AMD_OSVW_ERRATUM() macros. The latter is intended for newer errata that
+ * have an OSVW id assigned, which it takes as first argument. Both take a
+ * variable number of family-specific model-stepping ranges created by
+ * AMD_MODEL_RANGE(). Each erratum also has to be declared as extern const
+ * int[] in arch/x86/include/asm/processor.h.
+ *
+ * Example:
+ *
+ * const int amd_erratum_319[] =
+ * AMD_LEGACY_ERRATUM(AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0x4, 0x2),
+ * AMD_MODEL_RANGE(0x10, 0x8, 0x0, 0x8, 0x0),
+ * AMD_MODEL_RANGE(0x10, 0x9, 0x0, 0x9, 0x0));
+ */
+
+const int amd_erratum_400[] =
+ AMD_OSVW_ERRATUM(1, AMD_MODEL_RANGE(0xf, 0x41, 0x2, 0xff, 0xf),
+ AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0xff, 0xf));
+
+
+bool cpu_has_amd_erratum(const int *erratum)
+{
+ struct cpuinfo_x86 *cpu = ¤t_cpu_data;
+ int osvw_id = *erratum++;
+ u32 range;
+ u32 ms;
+
+ /*
+ * If called early enough that current_cpu_data hasn't been initialized
+ * yet, fall back to boot_cpu_data.
+ */
+ if (cpu->x86 == 0)
+ cpu = &boot_cpu_data;
+
+ if (cpu->x86_vendor != X86_VENDOR_AMD)
+ return false;
+
+ if (osvw_id >= 0 && osvw_id < 65536 &&
+ cpu_has(cpu, X86_FEATURE_OSVW)) {
+ u64 osvw_len;
+
+ rdmsrl(MSR_AMD64_OSVW_ID_LENGTH, osvw_len);
+ if (osvw_id < osvw_len) {
+ u64 osvw_bits;
+
+ rdmsrl(MSR_AMD64_OSVW_STATUS + (osvw_id >> 6),
+ osvw_bits);
+ return osvw_bits & (1ULL << (osvw_id & 0x3f));
+ }
+ }
+
+ /* OSVW unavailable or ID unknown, match family-model-stepping range */
+ ms = (cpu->x86_model << 4) | cpu->x86_mask;
+ while ((range = *erratum++))
+ if ((cpu->x86 == AMD_MODEL_RANGE_FAMILY(range)) &&
+ (ms >= AMD_MODEL_RANGE_START(range)) &&
+ (ms <= AMD_MODEL_RANGE_END(range)))
+ return true;
+
+ return false;
+}
@@ -438,42 +438,6 @@ static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
return (edx & MWAIT_EDX_C1);
}
-/*
- * Check for AMD CPUs, where APIC timer interrupt does not wake up CPU from C1e.
- * For more information see
- * - Erratum #400 for NPT family 0xf and family 0x10 CPUs
- * - Erratum #365 for family 0x11 (not affected because C1e not in use)
- */
-static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c)
-{
- u64 val;
- if (c->x86_vendor != X86_VENDOR_AMD)
- goto no_c1e_idle;
-
- /* Family 0x0f models < rev F do not have C1E */
- if (c->x86 == 0x0F && c->x86_model >= 0x40)
- return 1;
-
- if (c->x86 == 0x10) {
- /*
- * check OSVW bit for CPUs that are not affected
- * by erratum #400
- */
- if (cpu_has(c, X86_FEATURE_OSVW)) {
- rdmsrl(MSR_AMD64_OSVW_ID_LENGTH, val);
- if (val >= 2) {
- rdmsrl(MSR_AMD64_OSVW_STATUS, val);
- if (!(val & BIT(1)))
- goto no_c1e_idle;
- }
- }
- return 1;
- }
-
-no_c1e_idle:
- return 0;
-}
-
static cpumask_var_t c1e_mask;
static int c1e_detected;
@@ -551,7 +515,8 @@ void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
*/
printk(KERN_INFO "using mwait in idle threads.\n");
pm_idle = mwait_idle;
- } else if (check_c1e_idle(c)) {
+ } else if (cpu_has_amd_erratum(amd_erratum_400)) {
+ /* E400: APIC timer interrupt does not wake up CPU from C1e */
printk(KERN_INFO "using C1E aware idle routine\n");
pm_idle = c1e_idle;
} else
@@ -36,7 +36,7 @@
*/
#ifdef CONFIG_SMP
ENTRY(__write_lock_failed)
- CFI_STARTPROC simple
+ CFI_STARTPROC
FRAME
2: LOCK_PREFIX
addl $ RW_LOCK_BIAS,(%eax)
@@ -1430,9 +1430,9 @@ static DEVICE_ATTR(i2c_reg, S_IRUGO | S_IWUSR,
sn9c102_show_i2c_reg, sn9c102_store_i2c_reg);
static DEVICE_ATTR(i2c_val, S_IRUGO | S_IWUSR,
sn9c102_show_i2c_val, sn9c102_store_i2c_val);
-static DEVICE_ATTR(green, S_IWUGO, NULL, sn9c102_store_green);
-static DEVICE_ATTR(blue, S_IWUGO, NULL, sn9c102_store_blue);
-static DEVICE_ATTR(red, S_IWUGO, NULL, sn9c102_store_red);
+static DEVICE_ATTR(green, S_IWUSR, NULL, sn9c102_store_green);
+static DEVICE_ATTR(blue, S_IWUSR, NULL, sn9c102_store_blue);
+static DEVICE_ATTR(red, S_IWUSR, NULL, sn9c102_store_red);
static DEVICE_ATTR(frame_header, S_IRUGO, sn9c102_show_frame_header, NULL);
@@ -325,13 +325,13 @@ int usbpn_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
static const char ifname[] = "usbpn%d";
const struct usb_cdc_union_desc *union_header = NULL;
- const struct usb_cdc_header_desc *phonet_header = NULL;
const struct usb_host_interface *data_desc;
struct usb_interface *data_intf;
struct usb_device *usbdev = interface_to_usbdev(intf);
struct net_device *dev;
struct usbpn_dev *pnd;
u8 *data;
+ int phonet = 0;
int len, err;
data = intf->altsetting->extra;
@@ -352,10 +352,7 @@ int usbpn_probe(struct usb_interface *intf, const struct usb_device_id *id)
(struct usb_cdc_union_desc *)data;
break;
case 0xAB:
- if (phonet_header || dlen < 5)
- break;
- phonet_header =
- (struct usb_cdc_header_desc *)data;
+ phonet = 1;
break;
}
}
@@ -363,7 +360,7 @@ int usbpn_probe(struct usb_interface *intf, const struct usb_device_id *id)
len -= dlen;
}
- if (!union_header || !phonet_header)
+ if (!union_header || !phonet)
return -EINVAL;
data_intf = usb_ifnum_to_if(usbdev, union_header->bSlaveInterface0);
@@ -211,7 +211,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
break;
case USB_ENDPOINT_XFER_INT:
type = "Int.";
- if (speed == USB_SPEED_HIGH)
+ if (speed == USB_SPEED_HIGH || speed == USB_SPEED_SUPER)
interval = 1 << (desc->bInterval - 1);
else
interval = desc->bInterval;
@@ -219,7 +219,8 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
default: /* "can't happen" */
return start;
}
- interval *= (speed == USB_SPEED_HIGH) ? 125 : 1000;
+ interval *= (speed == USB_SPEED_HIGH ||
+ speed == USB_SPEED_SUPER) ? 125 : 1000;
if (interval % 1000)
unit = 'u';
else {
@@ -529,8 +530,9 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes,
if (level == 0) {
int max;
- /* high speed reserves 80%, full/low reserves 90% */
- if (usbdev->speed == USB_SPEED_HIGH)
+ /* super/high speed reserves 80%, full/low reserves 90% */
+ if (usbdev->speed == USB_SPEED_HIGH ||
+ usbdev->speed == USB_SPEED_SUPER)
max = 800;
else
max = FRAME_TIME_MAX_USECS_ALLOC;
@@ -1224,24 +1224,27 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
static void scan_async (struct ehci_hcd *ehci)
{
+ bool stopped;
struct ehci_qh *qh;
enum ehci_timer_action action = TIMER_IO_WATCHDOG;
ehci->stamp = ehci_readl(ehci, &ehci->regs->frame_index);
timer_action_done (ehci, TIMER_ASYNC_SHRINK);
rescan:
+ stopped = !HC_IS_RUNNING(ehci_to_hcd(ehci)->state);
qh = ehci->async->qh_next.qh;
if (likely (qh != NULL)) {
do {
/* clean any finished work for this qh */
- if (!list_empty (&qh->qtd_list)
- && qh->stamp != ehci->stamp) {
+ if (!list_empty(&qh->qtd_list) && (stopped ||
+ qh->stamp != ehci->stamp)) {
int temp;
/* unlinks could happen here; completion
* reporting drops the lock. rescan using
* the latest schedule, but don't rescan
- * qhs we already finished (no looping).
+ * qhs we already finished (no looping)
+ * unless the controller is stopped.
*/
qh = qh_get (qh);
qh->stamp = ehci->stamp;
@@ -1262,9 +1265,9 @@ rescan:
*/
if (list_empty(&qh->qtd_list)
&& qh->qh_state == QH_STATE_LINKED) {
- if (!ehci->reclaim
- && ((ehci->stamp - qh->stamp) & 0x1fff)
- >= (EHCI_SHRINK_FRAMES * 8))
+ if (!ehci->reclaim && (stopped ||
+ ((ehci->stamp - qh->stamp) & 0x1fff)
+ >= EHCI_SHRINK_FRAMES * 8))
start_unlink_async(ehci, qh);
else
action = TIMER_ASYNC_SHRINK;
@@ -439,6 +439,47 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
return 0;
}
+/*
+ * Convert interval expressed as 2^(bInterval - 1) == interval into
+ * straight exponent value 2^n == interval.
+ *
+ */
+static unsigned int xhci_parse_exponent_interval(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ unsigned int interval;
+
+ interval = clamp_val(ep->desc.bInterval, 1, 16) - 1;
+ if (interval != ep->desc.bInterval - 1)
+ dev_warn(&udev->dev,
+ "ep %#x - rounding interval to %d microframes\n",
+ ep->desc.bEndpointAddress,
+ 1 << interval);
+
+ return interval;
+}
+
+/*
+ * Convert bInterval expressed in frames (in 1-255 range) to exponent of
+ * microframes, rounded down to nearest power of 2.
+ */
+static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ unsigned int interval;
+
+ interval = fls(8 * ep->desc.bInterval) - 1;
+ interval = clamp_val(interval, 3, 10);
+ if ((1 << interval) != 8 * ep->desc.bInterval)
+ dev_warn(&udev->dev,
+ "ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n",
+ ep->desc.bEndpointAddress,
+ 1 << interval,
+ 8 * ep->desc.bInterval);
+
+ return interval;
+}
+
/* Return the polling or NAK interval.
*
* The polling interval is expressed in "microframes". If xHCI's Interval field
@@ -456,40 +497,38 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
case USB_SPEED_HIGH:
/* Max NAK rate */
if (usb_endpoint_xfer_control(&ep->desc) ||
- usb_endpoint_xfer_bulk(&ep->desc))
+ usb_endpoint_xfer_bulk(&ep->desc)) {
interval = ep->desc.bInterval;
+ break;
+ }
/* Fall through - SS and HS isoc/int have same decoding */
+
case USB_SPEED_SUPER:
if (usb_endpoint_xfer_int(&ep->desc) ||
- usb_endpoint_xfer_isoc(&ep->desc)) {
- if (ep->desc.bInterval == 0)
- interval = 0;
- else
- interval = ep->desc.bInterval - 1;
- if (interval > 15)
- interval = 15;
- if (interval != ep->desc.bInterval + 1)
- dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes\n",
- ep->desc.bEndpointAddress, 1 << interval);
+ usb_endpoint_xfer_isoc(&ep->desc)) {
+ interval = xhci_parse_exponent_interval(udev, ep);
}
break;
- /* Convert bInterval (in 1-255 frames) to microframes and round down to
- * nearest power of 2.
- */
+
case USB_SPEED_FULL:
+ if (usb_endpoint_xfer_int(&ep->desc)) {
+ interval = xhci_parse_exponent_interval(udev, ep);
+ break;
+ }
+ /*
+ * Fall through for isochronous endpoint interval decoding
+ * since it uses the same rules as low speed interrupt
+ * endpoints.
+ */
+
case USB_SPEED_LOW:
if (usb_endpoint_xfer_int(&ep->desc) ||
- usb_endpoint_xfer_isoc(&ep->desc)) {
- interval = fls(8*ep->desc.bInterval) - 1;
- if (interval > 10)
- interval = 10;
- if (interval < 3)
- interval = 3;
- if ((1 << interval) != 8*ep->desc.bInterval)
- dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes\n",
- ep->desc.bEndpointAddress, 1 << interval);
+ usb_endpoint_xfer_isoc(&ep->desc)) {
+
+ interval = xhci_parse_frame_interval(udev, ep);
}
break;
+
default:
BUG();
}
@@ -232,7 +232,7 @@ struct xhci_op_regs {
* notification type that matches a bit set in this bit field.
*/
#define DEV_NOTE_MASK (0xffff)
-#define ENABLE_DEV_NOTE(x) (1 << x)
+#define ENABLE_DEV_NOTE(x) (1 << (x))
/* Most of the device notification types should only be used for debug.
* SW does need to pay attention to function wake notifications.
*/
@@ -579,11 +579,11 @@ struct xhci_ep_ctx {
#define EP_STATE_STOPPED 3
#define EP_STATE_ERROR 4
/* Mult - Max number of burtst within an interval, in EP companion desc. */
-#define EP_MULT(p) ((p & 0x3) << 8)
+#define EP_MULT(p) (((p) & 0x3) << 8)
/* bits 10:14 are Max Primary Streams */
/* bit 15 is Linear Stream Array */
/* Interval - period between requests to an endpoint - 125u increments. */
-#define EP_INTERVAL(p) ((p & 0xff) << 16)
+#define EP_INTERVAL(p) (((p) & 0xff) << 16)
#define EP_INTERVAL_TO_UFRAMES(p) (1 << (((p) >> 16) & 0xff))
/* ep_info2 bitmasks */
@@ -155,6 +155,8 @@ static struct ftdi_sio_quirk ftdi_stmclite_quirk = {
* /sys/bus/usb/ftdi_sio/new_id, then send patch/report!
*/
static struct usb_device_id id_table_combined [] = {
+ { USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
@@ -529,6 +531,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
{ USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
{ USB_DEVICE(OCT_VID, OCT_US101_PID) },
+ { USB_DEVICE(OCT_VID, OCT_DK201_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID),
.driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID),
@@ -790,6 +793,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
+ { USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
+ { USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
{ USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
{ USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) },
{ USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
@@ -300,6 +300,8 @@
* Hameg HO820 and HO870 interface (using VID 0x0403)
*/
#define HAMEG_HO820_PID 0xed74
+#define HAMEG_HO730_PID 0xed73
+#define HAMEG_HO720_PID 0xed72
#define HAMEG_HO870_PID 0xed71
/*
@@ -579,6 +581,7 @@
/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
+#define OCT_DK201_PID 0x0103 /* OCT DK201 USB docking station */
#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */
/*
@@ -1147,3 +1150,12 @@
#define QIHARDWARE_VID 0x20B7
#define MILKYMISTONE_JTAGSERIAL_PID 0x0713
+/*
+ * CTI GmbH RS485 Converter http://www.cti-lean.com/
+ */
+/* USB-485-Mini*/
+#define FTDI_CTI_MINI_PID 0xF608
+/* USB-Nano-485*/
+#define FTDI_CTI_NANO_PID 0xF60B
+
+
@@ -388,6 +388,16 @@ static int option_resume(struct usb_serial *serial);
#define CELOT_VENDOR_ID 0x211f
#define CELOT_PRODUCT_CT680M 0x6801
+/* ONDA Communication vendor id */
+#define ONDA_VENDOR_ID 0x1ee8
+
+/* ONDA MT825UP HSDPA 14.2 modem */
+#define ONDA_MT825UP 0x000b
+
+/* Samsung products */
+#define SAMSUNG_VENDOR_ID 0x04e8
+#define SAMSUNG_PRODUCT_GT_B3730 0x6889
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -917,6 +927,8 @@ static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
+ { USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */
+ { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730/GT-B3710 LTE USB modem.*/
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
@@ -2532,7 +2532,7 @@ try_mount_again:
remote_path_check:
/* check if a whole path (including prepath) is not remote */
- if (!rc && cifs_sb->prepathlen && tcon) {
+ if (!rc && tcon) {
/* build_path_to_root works only when we have a valid tcon */
full_path = cifs_build_path_to_root(cifs_sb);
if (full_path == NULL) {
@@ -2806,11 +2806,16 @@ static int proc_pid_fill_cache(struct file *filp, void *dirent, filldir_t filldi
/* for the /proc/ directory itself, after non-process stuff has been done */
int proc_pid_readdir(struct file * filp, void * dirent, filldir_t filldir)
{
- unsigned int nr = filp->f_pos - FIRST_PROCESS_ENTRY;
- struct task_struct *reaper = get_proc_task(filp->f_path.dentry->d_inode);
+ unsigned int nr;
+ struct task_struct *reaper;
struct tgid_iter iter;
struct pid_namespace *ns;
+ if (filp->f_pos >= PID_MAX_LIMIT + TGID_OFFSET)
+ goto out_no_task;
+ nr = filp->f_pos - FIRST_PROCESS_ENTRY;
+
+ reaper = get_proc_task(filp->f_path.dentry->d_inode);
if (!reaper)
goto out_no_task;
@@ -111,6 +111,7 @@ int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize)
SetPageDirty(page);
unlock_page(page);
+ put_page(page);
}
return 0;
@@ -2691,19 +2691,19 @@ int dbg_debugfs_init_fs(struct ubifs_info *c)
}
fname = "dump_lprops";
- dent = debugfs_create_file(fname, S_IWUGO, d->dfs_dir, c, &dfs_fops);
+ dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, c, &dfs_fops);
if (IS_ERR(dent))
goto out_remove;
d->dfs_dump_lprops = dent;
fname = "dump_budg";
- dent = debugfs_create_file(fname, S_IWUGO, d->dfs_dir, c, &dfs_fops);
+ dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, c, &dfs_fops);
if (IS_ERR(dent))
goto out_remove;
d->dfs_dump_budg = dent;
fname = "dump_tnc";
- dent = debugfs_create_file(fname, S_IWUGO, d->dfs_dir, c, &dfs_fops);
+ dent = debugfs_create_file(fname, S_IWUSR, d->dfs_dir, c, &dfs_fops);
if (IS_ERR(dent))
goto out_remove;
d->dfs_dump_tnc = dent;
@@ -1311,6 +1311,9 @@ int ubifs_fsync(struct file *file, struct dentry *dentry, int datasync)
dbg_gen("syncing inode %lu", inode->i_ino);
+ if (inode->i_sb->s_flags & MS_RDONLY)
+ return 0;
+
/*
* VFS has already synchronized dirty pages for this inode. Synchronize
* the inode unless this is a 'datasync()' call.
@@ -117,7 +117,7 @@ extern struct pid *find_vpid(int nr);
*/
extern struct pid *find_get_pid(int nr);
extern struct pid *find_ge_pid(int nr, struct pid_namespace *);
-int next_pidmap(struct pid_namespace *pid_ns, int last);
+int next_pidmap(struct pid_namespace *pid_ns, unsigned int last);
extern struct pid *alloc_pid(struct pid_namespace *ns);
extern void free_pid(struct pid *pid);
@@ -182,11 +182,14 @@ static int alloc_pidmap(struct pid_namespace *pid_ns)
return -1;
}
-int next_pidmap(struct pid_namespace *pid_ns, int last)
+int next_pidmap(struct pid_namespace *pid_ns, unsigned int last)
{
int offset;
struct pidmap *map, *end;
+ if (last >= PID_MAX_LIMIT)
+ return -1;
+
offset = (last + 1) & BITS_PER_PAGE_MASK;
map = &pid_ns->pidmap[(last + 1)/BITS_PER_PAGE];
end = &pid_ns->pidmap[PIDMAP_ENTRIES];
@@ -1391,7 +1391,7 @@ static int ax25_getname(struct socket *sock, struct sockaddr *uaddr,
ax25_cb *ax25;
int err = 0;
- memset(fsa, 0, sizeof(fsa));
+ memset(fsa, 0, sizeof(*fsa));
lock_sock(sk);
ax25 = ax25_sk(sk);
@@ -473,6 +473,17 @@ static struct rds_rdma_op *rds_rdma_prepare(struct rds_sock *rs,
max_pages = max(nr, max_pages);
nr_pages += nr;
+
+ /*
+ * nr for one entry in limited to (UINT_MAX>>PAGE_SHIFT)+1
+ * so nr_pages cannot overflow without becoming bigger than
+ * INT_MAX first. If nr cannot overflow then max_pages should
+ * be ok.
+ */
+ if (nr_pages > INT_MAX) {
+ ret = -EINVAL;
+ goto out;
+ }
}
pages = kcalloc(max_pages, sizeof(struct page *), GFP_KERNEL);