Message ID | f6de1f875098451edad856ce00288d8221e7bbad.1714020303.git.Takahiro.Kuwano@infineon.com |
---|---|
State | Superseded |
Delegated to: | Jagannadha Sutradharudu Teki |
Headers | show |
Series | mtd: Make sure UBIFS does not do multi-pass page programming on flashes that don't support it | expand |
On 4/25/24 05:52, tkuw584924@gmail.com wrote: > From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> > > The Infineon SEMPER NOR flash family uses 2-bit ECC by default with each > ECC block being 16 bytes. Under this scheme multi-pass programming to an > ECC block is not allowed. Set the writesize to make sure multi-pass > programming is not attempted on the flash. > > Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org> > --- > drivers/mtd/spi/spi-nor-core.c | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c > index ee968c10e4..7985ca70ff 100644 > --- a/drivers/mtd/spi/spi-nor-core.c > +++ b/drivers/mtd/spi/spi-nor-core.c > @@ -3456,6 +3456,13 @@ static void s25_late_init(struct spi_nor *nor, > struct spi_nor_flash_parameter *params) > { > nor->setup = s25_s28_setup; > + > + /* > + * Programming is supported only in 16-byte ECC data unit granularity. > + * Byte-programming, bit-walking, or multiple program operations to the > + * same ECC data unit without an erase are not allowed. > + */ > + params->writesize = 16; > } > > static int s25_s28_post_bfpt_fixup(struct spi_nor *nor, > @@ -3620,6 +3627,13 @@ static void s28hx_t_late_init(struct spi_nor *nor, > { > nor->octal_dtr_enable = spi_nor_cypress_octal_dtr_enable; > nor->setup = s25_s28_setup; > + > + /* > + * Programming is supported only in 16-byte ECC data unit granularity. > + * Byte-programming, bit-walking, or multiple program operations to the > + * same ECC data unit without an erase are not allowed. > + */ > + params->writesize = 16; > } > > static void s28hx_t_post_sfdp_fixup(struct spi_nor *nor,
diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c index ee968c10e4..7985ca70ff 100644 --- a/drivers/mtd/spi/spi-nor-core.c +++ b/drivers/mtd/spi/spi-nor-core.c @@ -3456,6 +3456,13 @@ static void s25_late_init(struct spi_nor *nor, struct spi_nor_flash_parameter *params) { nor->setup = s25_s28_setup; + + /* + * Programming is supported only in 16-byte ECC data unit granularity. + * Byte-programming, bit-walking, or multiple program operations to the + * same ECC data unit without an erase are not allowed. + */ + params->writesize = 16; } static int s25_s28_post_bfpt_fixup(struct spi_nor *nor, @@ -3620,6 +3627,13 @@ static void s28hx_t_late_init(struct spi_nor *nor, { nor->octal_dtr_enable = spi_nor_cypress_octal_dtr_enable; nor->setup = s25_s28_setup; + + /* + * Programming is supported only in 16-byte ECC data unit granularity. + * Byte-programming, bit-walking, or multiple program operations to the + * same ECC data unit without an erase are not allowed. + */ + params->writesize = 16; } static void s28hx_t_post_sfdp_fixup(struct spi_nor *nor,