@@ -1235,6 +1235,18 @@ config ARCH_VERSAL
imply BOARD_LATE_INIT
imply ENV_VARS_UBOOT_RUNTIME_CONFIG
+config ARCH_VERSAL2
+ bool "Support AMD Versal Gen 2 Platform"
+ select ARM64
+ select CLK
+ select DM
+ select DM_MMC if MMC
+ select DM_SERIAL
+ select OF_CONTROL
+ imply BOARD_LATE_INIT
+ imply ENV_VARS_UBOOT_RUNTIME_CONFIG
+ imply ZYNQMP_FIRMWARE
+
config ARCH_VERSAL_NET
bool "Support Xilinx Versal NET Platform"
select ARM64
@@ -2317,6 +2329,8 @@ source "arch/arm/mach-zynqmp/Kconfig"
source "arch/arm/mach-versal/Kconfig"
+source "arch/arm/mach-versal2/Kconfig"
+
source "arch/arm/mach-versal-net/Kconfig"
source "arch/arm/mach-zynqmp-r5/Kconfig"
@@ -90,6 +90,7 @@ machine-$(CONFIG_ARCH_OCTEONTX) += octeontx
machine-$(CONFIG_ARCH_OCTEONTX2) += octeontx2
machine-$(CONFIG_ARCH_UNIPHIER) += uniphier
machine-$(CONFIG_ARCH_VERSAL) += versal
+machine-$(CONFIG_ARCH_VERSAL2) += versal2
machine-$(CONFIG_ARCH_VERSAL_NET) += versal-net
machine-$(CONFIG_ARCH_ZYNQ) += zynq
machine-$(CONFIG_ARCH_ZYNQMP) += zynqmp
@@ -345,6 +345,8 @@ dtb-$(CONFIG_ARCH_VERSAL) += \
versal-mini-qspi-x2-single.dtb \
versal-mini-qspi-x2-stacked.dtb \
xilinx-versal-virt.dtb
+dtb-$(CONFIG_ARCH_VERSAL2) += \
+ amd-versal2-virt.dtb
dtb-$(CONFIG_ARCH_VERSAL_NET) += \
versal-net-mini.dtb \
versal-net-mini-emmc.dtb \
new file mode 100644
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Empty device tree for amd-versal2-virt board
+ *
+ * Copyright (C) 2024, Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/ {
+};
new file mode 100644
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+
+if ARCH_VERSAL2
+
+config SYS_BOARD
+ string "Board name"
+ default "versal2"
+
+config SYS_VENDOR
+ string "Vendor name"
+ default "amd"
+
+config SYS_SOC
+ default "versal2"
+
+config SYS_CONFIG_NAME
+ string "Board configuration name"
+ default "amd_versal2"
+ help
+ This option contains information about board configuration name.
+ Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
+ will be used for board configuration.
+
+config COUNTER_FREQUENCY
+ int "Timer clock frequency"
+ default 0
+ help
+ Setup time clock frequency for certain platform
+
+config IOU_SWITCH_DIVISOR0
+ hex "IOU switch divisor0"
+ default 0x20
+ help
+ Setup time clock divisor for input clock.
+
+config SYS_MEM_RSVD_FOR_MMU
+ bool "Reserve memory for MMU Table"
+ help
+ If defined this option is used to setup different space for
+ MMU table than the one which will be allocated during
+ relocation.
+
+config GICV3
+ def_bool y
+
+config SYS_MALLOC_LEN
+ default 0x2000000
+
+config ZYNQ_SDHCI_MAX_FREQ
+ default 200000000
+
+source "board/xilinx/Kconfig"
+source "board/amd/versal2/Kconfig"
+
+endif
new file mode 100644
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (C) 2021 - 2022, Xilinx, Inc.
+# Copyright (C) 2022 - 2024, Advanced Micro Devices, Inc.
+#
+# Michal Simek <michal.simek@amd.com>
+#
+
+obj-y += clk.o
+obj-y += cpu.o
new file mode 100644
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 - 2022, Xilinx, Inc.
+ * Copyright (C) 2022 - 2024, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <init.h>
+#include <time.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_CLOCKS
+/**
+ * set_cpu_clk_info - Initialize clock framework
+ *
+ * Return: 0 always.
+ *
+ * This function is called from common code after relocation and sets up the
+ * clock framework. The framework must not be used before this function had been
+ * called.
+ */
+int set_cpu_clk_info(void)
+{
+ gd->cpu_clk = get_tbclk();
+
+ gd->bd->bi_arm_freq = gd->cpu_clk / 1000000;
+ gd->bd->bi_dsp_freq = 0;
+
+ return 0;
+}
+#endif
new file mode 100644
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 - 2022, Xilinx, Inc.
+ * Copyright (C) 2022 - 2024, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <init.h>
+#include <asm/armv8/mmu.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/cache.h>
+#include <dm/platdata.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define VERSAL2_MEM_MAP_USED 5
+
+#define DRAM_BANKS CONFIG_NR_DRAM_BANKS
+
+/* +1 is end of list which needs to be empty */
+#define VERSAL2_MEM_MAP_MAX (VERSAL2_MEM_MAP_USED + DRAM_BANKS + 1)
+
+static struct mm_region versal2_mem_map[VERSAL2_MEM_MAP_MAX] = {
+ {
+ .virt = 0x80000000UL,
+ .phys = 0x80000000UL,
+ .size = 0x70000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }, {
+ .virt = 0xf0000000UL,
+ .phys = 0xf0000000UL,
+ .size = 0x0fe00000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }, {
+ .virt = 0x400000000UL,
+ .phys = 0x400000000UL,
+ .size = 0x200000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }, {
+ .virt = 0x600000000UL,
+ .phys = 0x600000000UL,
+ .size = 0x800000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE
+ }, {
+ .virt = 0xe00000000UL,
+ .phys = 0xe00000000UL,
+ .size = 0xf200000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }
+};
+
+void mem_map_fill(void)
+{
+ int banks = VERSAL2_MEM_MAP_USED;
+
+ for (int i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ /* Zero size means no more DDR that's this is end */
+ if (!gd->bd->bi_dram[i].size)
+ break;
+
+ versal2_mem_map[banks].virt = gd->bd->bi_dram[i].start;
+ versal2_mem_map[banks].phys = gd->bd->bi_dram[i].start;
+ versal2_mem_map[banks].size = gd->bd->bi_dram[i].size;
+ versal2_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE;
+ banks = banks + 1;
+ }
+}
+
+struct mm_region *mem_map = versal2_mem_map;
+
+u64 get_page_table_size(void)
+{
+ return 0x14000;
+}
+
+U_BOOT_DRVINFO(soc_amd_versal2) = {
+ .name = "soc_amd_versal2",
+};
new file mode 100644
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016 - 2022, Xilinx, Inc.
+ * Copyright (C) 2022 - 2024, Advanced Micro Devices, Inc.
+ */
+
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+struct crlapb_regs {
+ u32 reserved0[67];
+ u32 cpu_r5_ctrl;
+ u32 reserved;
+ u32 iou_switch_ctrl; /* 0x114 */
+ u32 reserved1[13];
+ u32 timestamp_ref_ctrl; /* 0x14c */
+ u32 reserved3[108];
+ u32 rst_cpu_r5;
+ u32 reserved2[17];
+ u32 rst_timestamp; /* 0x348 */
+};
+
+struct iou_scntrs_regs {
+ u32 counter_control_register; /* 0x0 */
+ u32 reserved0[7];
+ u32 base_frequency_id_register; /* 0x20 */
+};
+
+struct crp_regs {
+ u32 reserved0[128];
+ u32 boot_mode_usr; /* 0x200 */
+};
+
+#define VERSAL2_CRL_APB_BASEADDR 0xEB5E0000
+#define VERSAL2_CRP_BASEADDR 0xF1260000
+#define VERSAL2_IOU_SCNTR_SECURE 0xEC920000
+
+#define CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_BIT BIT(25)
+#define IOU_SWITCH_CTRL_CLKACT_BIT BIT(25)
+#define IOU_SWITCH_CTRL_DIVISOR0_SHIFT 8
+#define IOU_SCNTRS_CONTROL_EN 1
+
+#define crlapb_base ((struct crlapb_regs *)VERSAL2_CRL_APB_BASEADDR)
+#define crp_base ((struct crp_regs *)VERSAL2_CRP_BASEADDR)
+#define iou_scntr_secure ((struct iou_scntrs_regs *)VERSAL2_IOU_SCNTR_SECURE)
+
+#define PMC_TAP 0xF11A0000
+
+#define PMC_TAP_IDCODE (PMC_TAP + 0)
+#define PMC_TAP_VERSION (PMC_TAP + 0x4)
+# define PMC_VERSION_MASK GENMASK(7, 0)
+# define PS_VERSION_MASK GENMASK(15, 8)
+# define PS_VERSION_PRODUCTION 0x20
+# define RTL_VERSION_MASK GENMASK(23, 16)
+# define PLATFORM_MASK GENMASK(27, 24)
+# define PLATFORM_VERSION_MASK GENMASK(31, 28)
+#define PMC_TAP_USERCODE (PMC_TAP + 0x8)
+
+/* Bootmode setting values */
+#define BOOT_MODES_MASK 0x0000000F
+#define QSPI_MODE_24BIT 0x00000001
+#define QSPI_MODE_32BIT 0x00000002
+#define SD_MODE 0x00000003 /* sd 0 */
+#define SD_MODE1 0x00000005 /* sd 1 */
+#define EMMC_MODE 0x00000006
+#define USB_MODE 0x00000007
+#define OSPI_MODE 0x00000008
+#define SELECTMAP_MODE 0x0000000A
+#define SD1_LSHFT_MODE 0x0000000E /* SD1 Level shifter */
+#define JTAG_MODE 0x00000000
+#define BOOT_MODE_USE_ALT 0x100
+#define BOOT_MODE_ALT_SHIFT 12
+
+enum versal2_platform {
+ VERSAL2_SILICON = 0,
+ VERSAL2_SPP = 1,
+ VERSAL2_EMU = 2,
+ VERSAL2_QEMU = 3,
+ VERSAL2_SPP_MMD = 5,
+ VERSAL2_EMU_MMD = 6,
+};
+
+#define VERSAL2_SLCR_BASEADDR 0xF1060000
+#define VERSAL_AXI_MUX_SEL (VERSAL2_SLCR_BASEADDR + 0x504)
+#define VERSAL_OSPI_LINEAR_MODE BIT(1)
+
+#define FLASH_RESET_GPIO 0xc
+#define WPROT_CRP 0xF126001C
+#define RST_GPIO 0xF1260318
+#define WPROT_LPD_MIO 0xFF080728
+#define WPROT_PMC_MIO 0xF1060828
+#define BOOT_MODE_DIR 0xF1020204
+#define BOOT_MODE_OUT 0xF1020208
+#define MIO_PIN_12 0xF1060030
+#define BANK0_OUTPUT 0xF1020040
+#define BANK0_TRI 0xF1060200
new file mode 100644
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2021 - 2022, Xilinx, Inc.
+ * Copyright (C) 2022 - 2024, Advanced Micro Devices, Inc.
+ */
+
+#include <linux/build_bug.h>
+
+void mem_map_fill(void);
new file mode 120000
@@ -0,0 +1 @@
+../xilinx/common/
\ No newline at end of file
new file mode 100644
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (C) 2020 - 2022, Xilinx, Inc.
+# Copyright (C) 2022 - 2024, Advanced Micro Devices, Inc.
+#
+if ARCH_VERSAL2
+
+config CMD_VERSAL2
+ bool "Enable Versal Gen 2 specific commands"
+ default y
+ depends on ZYNQMP_FIRMWARE
+ help
+ Select this to enable AMD Versal Gen 2 specific commands.
+ Commands like versal2 loadpdi are enabled by this.
+
+endif
new file mode 100644
@@ -0,0 +1,7 @@
+XILINX_VERSAL2 BOARDS
+M: Michal Simek <michal.simek@amd.com>
+S: Maintained
+T: git https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze.git
+F: arch/arm/dts/versal2*
+F: board/amd/
+F: configs/amd*
new file mode 100644
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (C) 2021 - 2022, Xilinx, Inc.
+# Copyright (C) 2022 - 2024, Advanced Micro Devices, Inc.
+#
+# Michal Simek <michal.simek@amd.com>
+#
+
+obj-y := board.o
+
+obj-$(CONFIG_CMD_VERSAL2) += cmds.o
new file mode 100644
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 - 2022, Xilinx, Inc.
+ * Copyright (C) 2022 - 2024, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <cpu_func.h>
+#include <fdtdec.h>
+#include <init.h>
+#include <env_internal.h>
+#include <log.h>
+#include <malloc.h>
+#include <time.h>
+#include <asm/cache.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+#include <dm/device.h>
+#include <dm/uclass.h>
+#include "../../xilinx/common/board.h"
+
+#include <linux/bitfield.h>
+#include <debug_uart.h>
+#include <generated/dt.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+ printf("EL Level:\tEL%d\n", current_el());
+
+ return 0;
+}
+
+static u32 platform_id, platform_version;
+
+char *soc_name_decode(void)
+{
+ char *name, *platform_name;
+
+ switch (platform_id) {
+ case VERSAL2_SPP:
+ platform_name = "spp";
+ break;
+ case VERSAL2_EMU:
+ platform_name = "emu";
+ break;
+ case VERSAL2_SPP_MMD:
+ platform_name = "spp-mmd";
+ break;
+ case VERSAL2_EMU_MMD:
+ platform_name = "emu-mmd";
+ break;
+ case VERSAL2_QEMU:
+ platform_name = "qemu";
+ break;
+ default:
+ return NULL;
+ }
+
+ /*
+ * --rev. are 6 chars
+ * max platform name is qemu which is 4 chars
+ * platform version number are 1+1
+ * Plus 1 char for \n
+ */
+ name = calloc(1, strlen(CONFIG_SYS_BOARD) + 13);
+ if (!name)
+ return NULL;
+
+ sprintf(name, "%s-%s-rev%d.%d-el%d", CONFIG_SYS_BOARD,
+ platform_name, platform_version / 10,
+ platform_version % 10, current_el());
+
+ return name;
+}
+
+bool soc_detection(void)
+{
+ u32 version, ps_version;
+
+ version = readl(PMC_TAP_VERSION);
+ platform_id = FIELD_GET(PLATFORM_MASK, version);
+ ps_version = FIELD_GET(PS_VERSION_MASK, version);
+
+ debug("idcode %x, version %x, usercode %x\n",
+ readl(PMC_TAP_IDCODE), version,
+ readl(PMC_TAP_USERCODE));
+
+ debug("pmc_ver %lx, ps version %x, rtl version %lx\n",
+ FIELD_GET(PMC_VERSION_MASK, version),
+ ps_version,
+ FIELD_GET(RTL_VERSION_MASK, version));
+
+ platform_version = FIELD_GET(PLATFORM_VERSION_MASK, version);
+
+ debug("Platform id: %d version: %d.%d\n", platform_id,
+ platform_version / 10, platform_version % 10);
+
+ return true;
+}
+
+int board_early_init_r(void)
+{
+ u32 val;
+
+ if (current_el() != 3)
+ return 0;
+
+ debug("iou_switch ctrl div0 %x\n",
+ readl(&crlapb_base->iou_switch_ctrl));
+
+ writel(IOU_SWITCH_CTRL_CLKACT_BIT |
+ (CONFIG_IOU_SWITCH_DIVISOR0 << IOU_SWITCH_CTRL_DIVISOR0_SHIFT),
+ &crlapb_base->iou_switch_ctrl);
+
+ /* Global timer init - Program time stamp reference clk */
+ val = readl(&crlapb_base->timestamp_ref_ctrl);
+ val |= CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_BIT;
+ writel(val, &crlapb_base->timestamp_ref_ctrl);
+
+ debug("ref ctrl 0x%x\n",
+ readl(&crlapb_base->timestamp_ref_ctrl));
+
+ /* Clear reset of timestamp reg */
+ writel(0, &crlapb_base->rst_timestamp);
+
+ /*
+ * Program freq register in System counter and
+ * enable system counter.
+ */
+ writel(CONFIG_COUNTER_FREQUENCY,
+ &iou_scntr_secure->base_frequency_id_register);
+
+ debug("counter val 0x%x\n",
+ readl(&iou_scntr_secure->base_frequency_id_register));
+
+ writel(IOU_SCNTRS_CONTROL_EN,
+ &iou_scntr_secure->counter_control_register);
+
+ debug("scntrs control 0x%x\n",
+ readl(&iou_scntr_secure->counter_control_register));
+ debug("timer 0x%llx\n", get_ticks());
+ debug("timer 0x%llx\n", get_ticks());
+
+ return 0;
+}
+
+static u8 versal_net_get_bootmode(void)
+{
+ u8 bootmode;
+ u32 reg = 0;
+
+ reg = readl(&crp_base->boot_mode_usr);
+
+ if (reg >> BOOT_MODE_ALT_SHIFT)
+ reg >>= BOOT_MODE_ALT_SHIFT;
+
+ bootmode = reg & BOOT_MODES_MASK;
+
+ return bootmode;
+}
+
+static int boot_targets_setup(void)
+{
+ u8 bootmode;
+ struct udevice *dev;
+ int bootseq = -1;
+ int bootseq_len = 0;
+ int env_targets_len = 0;
+ const char *mode = NULL;
+ char *new_targets;
+ char *env_targets;
+
+ bootmode = versal_net_get_bootmode();
+
+ puts("Bootmode: ");
+ switch (bootmode) {
+ case USB_MODE:
+ puts("USB_MODE\n");
+ mode = "usb_dfu0 usb_dfu1";
+ break;
+ case JTAG_MODE:
+ puts("JTAG_MODE\n");
+ mode = "jtag pxe dhcp";
+ break;
+ case QSPI_MODE_24BIT:
+ puts("QSPI_MODE_24\n");
+ if (uclass_get_device_by_name(UCLASS_SPI,
+ "spi@f1030000", &dev)) {
+ debug("QSPI driver for QSPI device is not present\n");
+ break;
+ }
+ mode = "xspi";
+ bootseq = dev_seq(dev);
+ break;
+ case QSPI_MODE_32BIT:
+ puts("QSPI_MODE_32\n");
+ if (uclass_get_device_by_name(UCLASS_SPI,
+ "spi@f1030000", &dev)) {
+ debug("QSPI driver for QSPI device is not present\n");
+ break;
+ }
+ mode = "xspi";
+ bootseq = dev_seq(dev);
+ break;
+ case OSPI_MODE:
+ puts("OSPI_MODE\n");
+ if (uclass_get_device_by_name(UCLASS_SPI,
+ "spi@f1010000", &dev)) {
+ debug("OSPI driver for OSPI device is not present\n");
+ break;
+ }
+ mode = "xspi";
+ bootseq = dev_seq(dev);
+ break;
+ case EMMC_MODE:
+ puts("EMMC_MODE\n");
+ mode = "mmc";
+ bootseq = dev_seq(dev);
+ break;
+ case SELECTMAP_MODE:
+ puts("SELECTMAP_MODE\n");
+ break;
+ case SD_MODE:
+ puts("SD_MODE\n");
+ if (uclass_get_device_by_name(UCLASS_MMC,
+ "mmc@f1040000", &dev)) {
+ debug("SD0 driver for SD0 device is not present\n");
+ break;
+ }
+ debug("mmc0 device found at %p, seq %d\n", dev, dev_seq(dev));
+
+ mode = "mmc";
+ bootseq = dev_seq(dev);
+ break;
+ case SD1_LSHFT_MODE:
+ puts("LVL_SHFT_");
+ fallthrough;
+ case SD_MODE1:
+ puts("SD_MODE1\n");
+ if (uclass_get_device_by_name(UCLASS_MMC,
+ "mmc@f1050000", &dev)) {
+ debug("SD1 driver for SD1 device is not present\n");
+ break;
+ }
+ debug("mmc1 device found at %p, seq %d\n", dev, dev_seq(dev));
+
+ mode = "mmc";
+ bootseq = dev_seq(dev);
+ break;
+ default:
+ printf("Invalid Boot Mode:0x%x\n", bootmode);
+ break;
+ }
+
+ if (mode) {
+ if (bootseq >= 0) {
+ bootseq_len = snprintf(NULL, 0, "%i", bootseq);
+ debug("Bootseq len: %x\n", bootseq_len);
+ }
+
+ /*
+ * One terminating char + one byte for space between mode
+ * and default boot_targets
+ */
+ env_targets = env_get("boot_targets");
+ if (env_targets)
+ env_targets_len = strlen(env_targets);
+
+ new_targets = calloc(1, strlen(mode) + env_targets_len + 2 +
+ bootseq_len);
+ if (!new_targets)
+ return -ENOMEM;
+
+ if (bootseq >= 0)
+ sprintf(new_targets, "%s%x %s", mode, bootseq,
+ env_targets ? env_targets : "");
+ else
+ sprintf(new_targets, "%s %s", mode,
+ env_targets ? env_targets : "");
+
+ env_set("boot_targets", new_targets);
+ }
+
+ return 0;
+}
+
+int board_late_init(void)
+{
+ int ret;
+
+ if (!(gd->flags & GD_FLG_ENV_DEFAULT)) {
+ debug("Saved variables - Skipping\n");
+ return 0;
+ }
+
+ if (!IS_ENABLED(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG))
+ return 0;
+
+ if (IS_ENABLED(CONFIG_DISTRO_DEFAULTS)) {
+ ret = boot_targets_setup();
+ if (ret)
+ return ret;
+ }
+
+ return board_late_init_xilinx();
+}
+
+int dram_init_banksize(void)
+{
+ int ret;
+
+ ret = fdtdec_setup_memory_banksize();
+ if (ret)
+ return ret;
+
+ mem_map_fill();
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ int ret;
+
+ if (IS_ENABLED(CONFIG_SYS_MEM_RSVD_FOR_MMU))
+ ret = fdtdec_setup_mem_size_base();
+ else
+ ret = fdtdec_setup_mem_size_base_lowest();
+
+ if (ret)
+ return -EINVAL;
+
+ return 0;
+}
+
+void reset_cpu(void)
+{
+}
new file mode 100644
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2024, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <cpu_func.h>
+#include <command.h>
+#include <log.h>
+#include <memalign.h>
+#include <versalpl.h>
+#include <vsprintf.h>
+#include <zynqmp_firmware.h>
+
+/**
+ * do_versal2_load_pdi - Handle the "versal2 load pdi" command-line command
+ * @cmdtp: Command data struct pointer
+ * @flag: Command flag
+ * @argc: Command-line argument count
+ * @argv: Array of command-line arguments
+ *
+ * Processes the versal2 load pdi command
+ *
+ * Return: return 0 on success, Error value if command fails.
+ * CMD_RET_USAGE incase of incorrect/missing parameters.
+ */
+static int do_versal2_load_pdi(struct cmd_tbl *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ u32 buf_lo, buf_hi;
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ ulong addr, *pdi_buf;
+ size_t len;
+ int ret;
+
+ if (argc != cmdtp->maxargs) {
+ debug("pdi_load: incorrect parameters passed\n");
+ return CMD_RET_USAGE;
+ }
+
+ addr = simple_strtol(argv[1], NULL, 16);
+ if (!addr) {
+ debug("pdi_load: zero pdi_data address\n");
+ return CMD_RET_USAGE;
+ }
+
+ len = hextoul(argv[2], NULL);
+ if (!len) {
+ debug("pdi_load: zero size\n");
+ return CMD_RET_USAGE;
+ }
+
+ pdi_buf = (ulong *)ALIGN((ulong)addr, ARCH_DMA_MINALIGN);
+ if ((ulong)addr != (ulong)pdi_buf) {
+ memcpy((void *)pdi_buf, (void *)addr, len);
+ debug("Pdi addr:0x%lx aligned to 0x%lx\n",
+ addr, (ulong)pdi_buf);
+ }
+
+ flush_dcache_range((ulong)pdi_buf, (ulong)pdi_buf + len);
+
+ buf_lo = lower_32_bits((ulong)pdi_buf);
+ buf_hi = upper_32_bits((ulong)pdi_buf);
+
+ ret = xilinx_pm_request(VERSAL_PM_LOAD_PDI, VERSAL_PM_PDI_TYPE, buf_lo,
+ buf_hi, 0, ret_payload);
+ if (ret)
+ printf("PDI load failed with err: 0x%08x\n", ret);
+
+ return cmd_process_error(cmdtp, ret);
+}
+
+static char versal2_help_text[] =
+ "loadpdi addr len - Load pdi image\n"
+ "load pdi image at ddr address 'addr' with pdi image size 'len'\n"
+;
+
+U_BOOT_CMD_WITH_SUBCMDS(versal2, "Versal Gen 2 sub-system", versal2_help_text,
+ U_BOOT_SUBCMD_MKENT(loadpdi, 3, 1,
+ do_versal2_load_pdi));
@@ -42,7 +42,7 @@ endif
config XILINX_OF_BOARD_DTB_ADDR
hex "Default DTB pickup address"
- default 0x1000 if ARCH_VERSAL || ARCH_VERSAL_NET
+ default 0x1000 if ARCH_VERSAL || ARCH_VERSAL_NET || ARCH_VERSAL2
default 0x8000 if MICROBLAZE
default 0x100000 if ARCH_ZYNQ || ARCH_ZYNQMP
default 0x23000000 if TARGET_XILINX_MBV
@@ -52,10 +52,10 @@ config XILINX_OF_BOARD_DTB_ADDR
config BOOT_SCRIPT_OFFSET
hex "Boot script offset"
- depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET || MICROBLAZE || TARGET_XILINX_MBV
+ depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET || ARCH_VERSAL2 || MICROBLAZE || TARGET_XILINX_MBV
default 0xFC0000 if ARCH_ZYNQ || MICROBLAZE
default 0x3E80000 if ARCH_ZYNQMP
- default 0x7F80000 if ARCH_VERSAL || ARCH_VERSAL_NET
+ default 0x7F80000 if ARCH_VERSAL || ARCH_VERSAL_NET || ARCH_VERSAL2
default 0 if TARGET_XILINX_MBV
help
Specifies distro boot script offset in NAND/QSPI/NOR flash.
new file mode 100644
@@ -0,0 +1,145 @@
+CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=375000
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_SYS_INIT_SP_BSS_OFFSET=1572864
+CONFIG_ARCH_VERSAL2=y
+CONFIG_TEXT_BASE=0x8000000
+CONFIG_SYS_MALLOC_F_LEN=0x100000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="amd-versal2-virt"
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_DM_RESET=y
+CONFIG_DEBUG_UART_BASE=0xf1920000
+CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_CMD_FRU=y
+CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_DEBUG_UART=y
+CONFIG_SYS_MEMTEST_START=0x00000000
+CONFIG_SYS_MEMTEST_END=0x00001000
+CONFIG_REMAKE_ELF=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SYS_BOOTM_LEN=0x6400000
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTDELAY=5
+# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_USE_PREBOOT=y
+CONFIG_SYS_PBSIZE=2073
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_CLOCKS=y
+CONFIG_SYS_PROMPT="versal2> "
+CONFIG_CMD_BOOTMENU=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_NVEDIT_EFI=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_UFS=y
+CONFIG_CMD_USB=y
+CONFIG_BOOTP_MAY_FAIL=y
+CONFIG_BOOTP_BOOTFILESIZE=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EFIDEBUG=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_RNG=y
+CONFIG_CMD_KASLRSEED=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_SMC=y
+CONFIG_CMD_TPM=y
+CONFIG_CMD_SCMI=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_SQUASHFS=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_UBI=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_OF_BOARD=y
+CONFIG_DTB_RESELECT=y
+CONFIG_MULTI_DTB_FIT=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
+CONFIG_IP_DEFRAG=y
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
+CONFIG_TFTP_BLOCKSIZE=4096
+CONFIG_CLK_CCF=y
+CONFIG_CLK_SCMI=y
+CONFIG_DFU_RAM=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_CADENCE=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_DM_MAILBOX=y
+CONFIG_ZYNQMP_IPI=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_ISSI=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MT35XU=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHY_MARVELL=y
+CONFIG_PHY_NATSEMI=y
+CONFIG_PHY_REALTEK=y
+CONFIG_PHY_TI_DP83867=y
+CONFIG_PHY_VITESSE=y
+CONFIG_PHY_FIXED=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_PHY_GIGE=y
+CONFIG_XILINX_AXIEMAC=y
+CONFIG_ZYNQ_GEM=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_RESET_SCMI=y
+CONFIG_SCSI=y
+CONFIG_DEBUG_UART_PL011=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_ARM_DCC=y
+CONFIG_PL01X_SERIAL=y
+CONFIG_XILINX_UARTLITE=y
+CONFIG_SOC_DEVICE=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_ZYNQ_SPI=y
+CONFIG_TPM2_TIS_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
+CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
+CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_FUNCTION_THOR=y
+CONFIG_UFS=y
+CONFIG_CADENCE_UFS=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_NET=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_TPM=y
@@ -487,7 +487,7 @@ config MVEBU_GPIO
config ZYNQ_GPIO
bool "Zynq GPIO driver"
depends on DM_GPIO
- default y if ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
+ default y if ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL2
help
Supports GPIO access on Zynq SoC.
@@ -54,7 +54,7 @@ config K3_SEC_PROXY
config ZYNQMP_IPI
bool "Xilinx ZynqMP IPI controller support"
- depends on DM_MAILBOX && (ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET)
+ depends on DM_MAILBOX && (ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET || ARCH_VERSAL2)
help
This enables support for the Xilinx ZynqMP Inter Processor Interrupt
communication controller.
@@ -570,7 +570,7 @@ config ENV_OFFSET
default 0xF0000 if ARCH_SUNXI
default 0xE0000 if ARCH_ZYNQ
default 0x1E00000 if ARCH_ZYNQMP
- default 0x7F40000 if ARCH_VERSAL || ARCH_VERSAL_NET
+ default 0x7F40000 if ARCH_VERSAL || ARCH_VERSAL_NET || ARCH_VERSAL2
default 0x0 if ARC
default 0x140000 if ARCH_AT91
default 0x260000 if ARCH_OMAP2PLUS
@@ -605,7 +605,7 @@ config ENV_SIZE
default 0x10000 if ARCH_SUNXI
default 0x8000 if ARCH_ROCKCHIP && ENV_IS_IN_MMC
default 0x2000 if ARCH_ROCKCHIP && ENV_IS_IN_SPI_FLASH
- default 0x8000 if ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET
+ default 0x8000 if ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET || ARCH_VERSAL2
default 0x4000 if ARC
default 0x1f000
help
@@ -615,7 +615,7 @@ config ENV_SECT_SIZE
hex "Environment Sector-Size"
depends on ENV_IS_IN_FLASH || ENV_IS_IN_SPI_FLASH
default 0x2000 if ARCH_ROCKCHIP
- default 0x40000 if ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET
+ default 0x40000 if ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET || ARCH_VERSAL2
default 0x20000 if ARCH_ZYNQ || ARCH_OMAP2PLUS || ARCH_AT91
default 0x20000 if MICROBLAZE && ENV_IS_IN_SPI_FLASH
default 0x10000 if ARCH_SUNXI && ENV_IS_IN_SPI_FLASH
new file mode 100644
@@ -0,0 +1,143 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Configuration for AMD Versal Gen 2
+ * Copyright (C) 2016 - 2022, Xilinx, Inc.
+ * Copyright (C) 2022 - 2024, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ *
+ * Based on Configuration for Xilinx ZynqMP
+ */
+
+#ifndef __AMD_VERSAL2_H
+#define __AMD_VERSAL2_H
+
+/* FIXME this is causing issue at least on IPP */
+/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE 0xF9000000
+#define GICR_BASE 0xF9060000
+
+/* Serial setup */
+#define CFG_SYS_BAUDRATE_TABLE \
+ { 4800, 9600, 19200, 38400, 57600, 115200 }
+
+#if defined(CONFIG_CMD_DFU)
+#define DFU_DEFAULT_POLL_TIMEOUT 300
+#define DFU_ALT_INFO_RAM \
+ "dfu_ram_info=" \
+ "setenv dfu_alt_info " \
+ "Image ram 80000 $kernel_size_r\\\\;" \
+ "system.dtb ram $fdt_addr_r $fdt_size_r\0" \
+ "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
+ "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
+
+#define DFU_ALT_INFO \
+ DFU_ALT_INFO_RAM
+#endif
+
+#if !defined(DFU_ALT_INFO)
+# define DFU_ALT_INFO
+#endif
+
+/* Ethernet driver */
+#if defined(CONFIG_ZYNQ_GEM)
+# define PHY_ANEG_TIMEOUT 20000
+#endif
+
+#define ENV_MEM_LAYOUT_SETTINGS \
+ "fdt_addr_r=0x40000000\0" \
+ "fdt_size_r=0x400000\0" \
+ "pxefile_addr_r=0x10000000\0" \
+ "kernel_addr_r=0x18000000\0" \
+ "kernel_size_r=0x10000000\0" \
+ "kernel_comp_addr_r=0x30000000\0" \
+ "kernel_comp_size=0x3C00000\0" \
+ "ramdisk_addr_r=0x02100000\0" \
+ "script_size_f=0x80000\0"
+
+#if defined(CONFIG_DISTRO_DEFAULTS)
+
+#if defined(CONFIG_MMC_SDHCI_ZYNQ)
+# define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
+#else
+# define BOOT_TARGET_DEVICES_MMC(func)
+#endif
+
+#if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP)
+# define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
+#else
+# define BOOT_TARGET_DEVICES_PXE(func)
+#endif
+
+#if defined(CONFIG_CMD_DHCP)
+# define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
+#else
+# define BOOT_TARGET_DEVICES_DHCP(func)
+#endif
+
+#if defined(CONFIG_ZYNQMP_GQSPI) || defined(CONFIG_CADENCE_OSPI_VERSAL)
+# define BOOT_TARGET_DEVICES_XSPI(func) func(XSPI, xspi, 0) func(XSPI, xspi, 1)
+# define BOOTENV_DEV_SHARED_XSPI \
+ "xspi_boot=sf probe $devnum_xspi:0 0 0 && " \
+ "sf read $scriptaddr $script_offset_f $script_size_f && " \
+ "echo XSPI: Trying to boot script at ${scriptaddr} && " \
+ "source ${scriptaddr}; echo XSPI: SCRIPT FAILED: continuing...;\0"
+#else
+# define BOOT_TARGET_DEVICES_XSPI(func)
+# define BOOTENV_DEV_SHARED_XSPI
+#endif
+
+#define BOOTENV_DEV_XSPI(devtypeu, devtypel, instance) \
+ "bootcmd_" #devtypel #instance "=" \
+ "devnum_xspi=" #instance "; run " #devtypel "_boot\0" \
+
+#define BOOTENV_DEV_NAME_XSPI(devtypeu, devtypel, instance) \
+ ""
+
+#define BOOT_TARGET_DEVICES_JTAG(func) func(JTAG, jtag, na)
+
+#define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \
+ "bootcmd_jtag=echo JTAG: Trying to boot script at ${scriptaddr} && " \
+ "source ${scriptaddr}; echo JTAG: SCRIPT FAILED: continuing...;\0"
+
+#define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \
+ "jtag "
+
+#define BOOT_TARGET_DEVICES_DFU_USB(func) func(DFU_USB, dfu_usb, 0)
+
+#define BOOTENV_DEV_DFU_USB(devtypeu, devtypel, instance) \
+ "bootcmd_dfu_usb=setenv dfu_alt_info boot.scr ram $scriptaddr " \
+ "$script_size_f; dfu 0 ram 0 && " \
+ "echo DFU: Trying to boot script at ${scriptaddr} && " \
+ "source ${scriptaddr}; " \
+ "echo DFU: SCRIPT FAILED: continuing...;\0"
+
+#define BOOTENV_DEV_NAME_DFU_USB(devtypeu, devtypel, instance) \
+ ""
+
+#define BOOT_TARGET_DEVICES(func) \
+ BOOT_TARGET_DEVICES_JTAG(func) \
+ BOOT_TARGET_DEVICES_MMC(func) \
+ BOOT_TARGET_DEVICES_XSPI(func) \
+ BOOT_TARGET_DEVICES_DFU_USB(func) \
+ BOOT_TARGET_DEVICES_PXE(func) \
+ BOOT_TARGET_DEVICES_DHCP(func)
+
+#include <config_distro_bootcmd.h>
+
+#else /* CONFIG_DISTRO_DEFAULTS */
+# define BOOTENV
+#endif /* CONFIG_DISTRO_DEFAULTS */
+
+/* Initial environment variables */
+#ifndef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
+ ENV_MEM_LAYOUT_SETTINGS \
+ BOOTENV \
+ BOOTENV_DEV_SHARED_XSPI \
+ DFU_ALT_INFO
+#endif
+
+#endif /* __AMD_VERSAL2_H */
Add support for AMD Versal Gen 2. SoC is based on Cortex-a78ae 4 cluster/2 cpu core each. A lot of IPs are shared with previous families. There are couple of new IP blocks where the most interesting from user point of view is UFS. Signed-off-by: Michal Simek <michal.simek@amd.com> --- arch/arm/Kconfig | 14 + arch/arm/Makefile | 1 + arch/arm/dts/Makefile | 2 + arch/arm/dts/amd-versal2-virt.dts | 11 + arch/arm/mach-versal2/Kconfig | 55 +++ arch/arm/mach-versal2/Makefile | 10 + arch/arm/mach-versal2/clk.c | 34 ++ arch/arm/mach-versal2/cpu.c | 93 +++++ arch/arm/mach-versal2/include/mach/hardware.h | 97 +++++ .../arm/mach-versal2/include/mach/sys_proto.h | 9 + board/amd/common | 1 + board/amd/versal2/Kconfig | 16 + board/amd/versal2/MAINTAINERS | 7 + board/amd/versal2/Makefile | 11 + board/amd/versal2/board.c | 343 ++++++++++++++++++ board/amd/versal2/cmds.c | 81 +++++ board/xilinx/Kconfig | 6 +- configs/amd_versal2_virt_defconfig | 145 ++++++++ drivers/gpio/Kconfig | 2 +- drivers/mailbox/Kconfig | 2 +- env/Kconfig | 6 +- include/configs/amd_versal2.h | 143 ++++++++ 22 files changed, 1081 insertions(+), 8 deletions(-) create mode 100644 arch/arm/dts/amd-versal2-virt.dts create mode 100644 arch/arm/mach-versal2/Kconfig create mode 100644 arch/arm/mach-versal2/Makefile create mode 100644 arch/arm/mach-versal2/clk.c create mode 100644 arch/arm/mach-versal2/cpu.c create mode 100644 arch/arm/mach-versal2/include/mach/hardware.h create mode 100644 arch/arm/mach-versal2/include/mach/sys_proto.h create mode 120000 board/amd/common create mode 100644 board/amd/versal2/Kconfig create mode 100644 board/amd/versal2/MAINTAINERS create mode 100644 board/amd/versal2/Makefile create mode 100644 board/amd/versal2/board.c create mode 100644 board/amd/versal2/cmds.c create mode 100644 configs/amd_versal2_virt_defconfig create mode 100644 include/configs/amd_versal2.h