Message ID | b1c3ac880cc2127cbd64cf4b2f14bc3435abe77a.1614088436.git.michal.simek@xilinx.com |
---|---|
State | Accepted |
Commit | fbf043d7e637378354fdc47369b0f48682d766a3 |
Delegated to: | Michal Simek |
Headers | show |
Series | arm64: zynqmp: Update device tree properties for nand flash | expand |
Ășt 23. 2. 2021 v 14:53 odesĂlatel Michal Simek <michal.simek@xilinx.com> napsal: > > From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> > > Update the following device tree properties for nand flash > > - Set software ecc mode. > - Set bch as ecc algo. > - Set read block to 0. > > Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> > Signed-off-by: Michal Simek <michal.simek@xilinx.com> > --- > > arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts > index 92d938d665d2..3204456e6451 100644 > --- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts > +++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts > @@ -124,6 +124,10 @@ > reg = <0x0>; > #address-cells = <0x2>; > #size-cells = <0x1>; > + nand-ecc-mode = "soft"; > + nand-ecc-algo = "bch"; > + nand-rb = <0>; > + label = "main-storage-0"; > > partition@0 { /* for testing purpose */ > label = "nand-fsbl-uboot"; > @@ -154,6 +158,10 @@ > reg = <0x1>; > #address-cells = <0x2>; > #size-cells = <0x1>; > + nand-ecc-mode = "soft"; > + nand-ecc-algo = "bch"; > + nand-rb = <0>; > + label = "main-storage-1"; > > partition@0 { /* for testing purpose */ > label = "nand1-fsbl-uboot"; > -- > 2.30.0 > Applied. M
diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts index 92d938d665d2..3204456e6451 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts @@ -124,6 +124,10 @@ reg = <0x0>; #address-cells = <0x2>; #size-cells = <0x1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "bch"; + nand-rb = <0>; + label = "main-storage-0"; partition@0 { /* for testing purpose */ label = "nand-fsbl-uboot"; @@ -154,6 +158,10 @@ reg = <0x1>; #address-cells = <0x2>; #size-cells = <0x1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "bch"; + nand-rb = <0>; + label = "main-storage-1"; partition@0 { /* for testing purpose */ label = "nand1-fsbl-uboot";