Message ID | F56FD322-7E95-4149-B57B-8542C8101C6B@gmail.com |
---|---|
State | Accepted |
Delegated to: | Albert ARIBAUD |
Headers | show |
Hi Tom, Le 10/02/2012 23:56, Tom Rini a écrit : > Hello, > > The following changes since commit ca849aa4b86b282f837c58a0b129460ebfad2239: > David Müller (ELSOFT AG) (1): > ARM: activate DISPLAY_CPUINFO for VCMA9 + SMDK2410 board > > are available in the git repository at: > > git://git.denx.de/u-boot-ti.git master > > Aneesh V (1): > OMAP4460: Reduce MPU clock speed from 920 to 700 > > Christian Riesch (5): > arm, davinci: Add lowlevel_init for SoCs other than DM644X > arm, arm926ejs: Do cpu critical inits only for boards that require it > arm, arm926ejs: Add option CONFIG_SYS_EXCEPTION_VECTORS_HIGH > arm, arm926ejs: Enable icache only if CONFIG_SYS_ICACHE_OFF is not defined > arm, davinci: Add support for the Calimain board from OMICRON electronics > > Govindraj.R (6): > usb: ulpi: Extend the existing ulpi framework. > usb: ulpi: Add omap-ulpi-view port support > ehci-omap: Clean up added ehci-omap.c > OMAP3+: Clock: Adding ehci clock enabling > OMAP4: clock-common: Move the usb dppl configuration to new func > OMAP4: ehci-omap: enable ehci-omap for panda boards > > Hadli, Manjunath (2): > davinci: remove macro CONFIG_DISPLAY_CPUINFO > davinci: add support for printing clock frequency > > Ilya Yanok (2): > ehci-omap: driver for EHCI host on OMAP3 > mcx: support for HTKW mcx board > > Peter Barada (2): > omap3logic: Add missing GPMC pinmux for LAN92xx access > ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition > > Peter Meerwald (3): > beagle: fix typos > omap3: fix comment typos > doc: fix typos > > Schuyler Patton (1): > AM3517: Changed default clock rate for AM3517 > > Stefano Babic (2): > OMAP3: TAM3517: update ehci interface > ARM: omap3: Added Teejet mt_ventoux > > Sughosh Ganu (2): > arm, arm926ejs: Flush the data cache before disabling it > Changes to move hawkboard to the new spl infrastructure > > MAINTAINERS | 10 + > README | 6 + > arch/arm/cpu/arm926ejs/davinci/cpu.c | 76 ++-- > arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 24 +- > arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S | 4 + > arch/arm/cpu/arm926ejs/davinci/spl.c | 4 +- > arch/arm/cpu/arm926ejs/start.S | 28 +- > arch/arm/cpu/armv7/omap-common/clocks-common.c | 54 ++- > arch/arm/cpu/armv7/omap3/board.c | 8 +- > arch/arm/cpu/armv7/omap3/clock.c | 20 + > arch/arm/cpu/armv7/omap4/clocks.c | 27 +- > arch/arm/include/asm/arch-davinci/da850_lowlevel.h | 9 + > arch/arm/include/asm/arch-omap3/clocks_omap3.h | 2 +- > .../asm/arch-omap3/{ehci_omap3.h => ehci.h} | 45 +-- > arch/arm/include/asm/arch-omap3/mem.h | 57 ++-- > arch/arm/include/asm/arch-omap3/sys_proto.h | 1 + > arch/arm/include/asm/arch-omap4/ehci.h | 49 +++ > arch/arm/include/asm/ehci-omap.h | 142 +++++++ > arch/arm/include/asm/u-boot.h | 3 + > arch/arm/lib/board.c | 10 +- > board/davinci/da8xxevm/da850evm.c | 4 +- > board/davinci/da8xxevm/hawkboard.c | 23 + > board/davinci/da8xxevm/hawkboard_nand_spl.c | 115 ------ > .../{u-boot-spl.lds => u-boot-spl-da850evm.lds} | 0 > .../davinci/da8xxevm/u-boot-spl-hawk.lds | 22 +- > board/efikamx/efikamx-usb.c | 24 +- > board/enbw/enbw_cmc/enbw_cmc.c | 13 +- > board/htkw/mcx/Makefile | 38 ++ > board/htkw/mcx/mcx.c | 112 +++++ > board/htkw/mcx/mcx.h | 408 +++++++++++++++++++ > board/logicpd/omap3som/omap3logic.c | 15 + > board/omicron/calimain/Makefile | 45 ++ > board/omicron/calimain/calimain.c | 188 +++++++++ > board/technexion/twister/twister.c | 22 + > board/teejet/mt_ventoux/Makefile | 38 ++ > board/teejet/mt_ventoux/mt_ventoux.c | 233 +++++++++++ > board/teejet/mt_ventoux/mt_ventoux.h | 429 ++++++++++++++++++++ > board/ti/beagle/beagle.c | 109 +----- > board/ti/beagle/beagle.h | 4 +- > board/ti/panda/panda.c | 38 ++ > board/ti/panda/panda_mux_data.h | 16 +- > boards.cfg | 4 +- > common/cmd_bdinfo.c | 9 + > doc/README.SPL | 4 +- > doc/README.hawkboard | 43 +- > doc/README.omap-ulpi-viewport | 27 ++ > drivers/usb/host/Makefile | 1 + > drivers/usb/host/ehci-omap.c | 255 ++++++++++++ > drivers/usb/ulpi/Makefile | 1 + > drivers/usb/ulpi/omap-ulpi-viewport.c | 105 +++++ > drivers/usb/ulpi/ulpi-viewport.c | 32 +- > drivers/usb/ulpi/ulpi.c | 54 ++-- > include/common.h | 1 + > include/configs/calimain.h | 363 +++++++++++++++++ > include/configs/cam_enc_4xx.h | 11 +- > include/configs/da830evm.h | 4 + > include/configs/da850evm.h | 11 +- > include/configs/davinci_dm355evm.h | 5 +- > include/configs/davinci_dm355leopard.h | 5 +- > include/configs/davinci_dm365evm.h | 4 + > include/configs/davinci_dm6467Tevm.h | 5 +- > include/configs/davinci_dm6467evm.h | 5 +- > include/configs/davinci_dvevm.h | 6 +- > include/configs/davinci_schmoogie.h | 5 +- > include/configs/davinci_sffsdr.h | 5 +- > include/configs/davinci_sonata.h | 5 +- > include/configs/ea20.h | 4 + > include/configs/enbw_cmc.h | 11 +- > include/configs/hawkboard.h | 28 ++- > include/configs/mcx.h | 378 +++++++++++++++++ > include/configs/mt_ventoux.h | 58 +++ > include/configs/omap3_beagle.h | 8 + > include/configs/omap4_panda.h | 26 ++- > include/configs/tam3517-common.h | 6 +- > include/usb/ulpi.h | 36 ++- > nand_spl/board/davinci/da8xxevm/Makefile | 155 ------- > 76 files changed, 3496 insertions(+), 659 deletions(-) > rename arch/arm/include/asm/arch-omap3/{ehci_omap3.h => ehci.h} (51%) > create mode 100644 arch/arm/include/asm/arch-omap4/ehci.h > create mode 100644 arch/arm/include/asm/ehci-omap.h > delete mode 100644 board/davinci/da8xxevm/hawkboard_nand_spl.c > rename board/davinci/da8xxevm/{u-boot-spl.lds => u-boot-spl-da850evm.lds} (100%) > rename nand_spl/board/davinci/da8xxevm/u-boot.lds => board/davinci/da8xxevm/u-boot-spl-hawk.lds (86%) > create mode 100644 board/htkw/mcx/Makefile > create mode 100644 board/htkw/mcx/mcx.c > create mode 100644 board/htkw/mcx/mcx.h > create mode 100644 board/omicron/calimain/Makefile > create mode 100644 board/omicron/calimain/calimain.c > create mode 100644 board/teejet/mt_ventoux/Makefile > create mode 100644 board/teejet/mt_ventoux/mt_ventoux.c > create mode 100644 board/teejet/mt_ventoux/mt_ventoux.h > create mode 100644 doc/README.omap-ulpi-viewport > create mode 100644 drivers/usb/host/ehci-omap.c > create mode 100644 drivers/usb/ulpi/omap-ulpi-viewport.c > create mode 100644 include/configs/calimain.h > create mode 100644 include/configs/mcx.h > create mode 100644 include/configs/mt_ventoux.h > delete mode 100644 nand_spl/board/davinci/da8xxevm/Makefile > > I've tested the USB changes on Beagleboard xM and Pandaboard ES. Applied to u-boot-arm/master, thanks! Amicalement,