mbox

[U-Boot,PULL] Please pull u-boot-imx

Message ID 545A57D0.1020002@denx.de
State Accepted
Delegated to: Tom Rini
Headers show

Pull-request

git://www.denx.de/git/u-boot-imx.git master

Message

Stefano Babic Nov. 5, 2014, 5:01 p.m. UTC
Hi Tom,

please pull from u-boot-imx, thanks !

The following changes since commit 3f97af5302ee15530411232b464d255eb2ff2ffb:

  ot1200: add sata support (2014-10-23 10:04:26 +0200)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 0b23780ff02bdbec46fac1fe4151e2ebf1eae881:

  arm: mx6: cm_fx6: detect 1GB DRAM correctly on solo (2014-11-05
17:18:01 +0100)

----------------------------------------------------------------
Anatolij Gustschin (1):
      arm: imx6: fix typos in CCM_ANALOG_PLL_VIDEO_DENOM register name

Christian Gmeiner (3):
      ot1200: add feature pads
      ot1200: add support for usdhc4
      ot1200: rework card detect for eMMC

Fabio Estevam (2):
      mx6sabresd: Add Seiko WVGA panel support
      novena: Add MAINTAINERS file

Heiko Schocher (1):
      arm, imx, spi: detect spi flash again on aristainetos board

Jeroen Hofstee (1):
      board: wandboard: add usb storage

Marek Vasut (3):
      ARM: mx6: Add support for Kosagi Novena
      mtd: nand: mxs: Add ECC geometry for 2048b/112b NAND
      arm: mxs: Define bootscript env variable on m28evk

Markus Niebel (2):
      tqma6: fix sf detection
      tqma6: fix typo in header guard define

Nikita Kiryanov (2):
      arm: mx6: cm_fx6: change issd gpio order
      arm: mx6: cm_fx6: detect 1GB DRAM correctly on solo

Nikolay Dimitrov (1):
      novena: Fix ethernet PHY reset sequence

Soeren Moch (1):
      arm: arch-mx6: typo fixes in crm_regs.h

Ye.Li (9):
      imximage: Fix the bootdata.size calculation
      imx: gpt: Add High frequency clock source support for GPT
      imx: mx6sl: Add perclk_clk_sel bit define in CCM
      imx: mx6: Change the get_ipg_per_clk for OSC 24Mhz source
      imx: mx6sl: Set the preclk clock source to OSC 24Mhz
      imx: mx6: Enable high frequency clock source for GPT
      imx: mx6sl: Add IOMUX setting for USDHC1-3
      imx: mx6slevk: Add support for USDHC1 and USDHC3 slots
      imx: mx6 sabreauto: Add board support for USB EHCI

 arch/arm/Kconfig                              |   4 +
 arch/arm/cpu/armv7/mx6/clock.c                |   4 +
 arch/arm/cpu/armv7/mx6/soc.c                  |  17 +
 arch/arm/imx-common/iomux-v3.c                |  15 +
 arch/arm/imx-common/timer.c                   |  75 +++-
 arch/arm/include/asm/arch-mx6/crm_regs.h      |  12 +-
 arch/arm/include/asm/arch-mx6/mx6sl_pins.h    |  19 +
 arch/arm/include/asm/imx-common/iomux-v3.h    |   5 +
 board/aristainetos/aristainetos.c             |   6 +
 board/bachmann/ot1200/ot1200.c                |  70 ++-
 board/compulab/cm_fx6/cm_fx6.c                |   2 +-
 board/compulab/cm_fx6/spl.c                   |   7 +-
 board/freescale/mx6qsabreauto/mx6qsabreauto.c |  93 ++++
 board/freescale/mx6sabresd/mx6sabresd.c       |  61 +++
 board/freescale/mx6slevk/mx6slevk.c           | 105 ++++-
 board/kosagi/novena/Kconfig                   |  18 +
 board/kosagi/novena/MAINTAINERS               |   6 +
 board/kosagi/novena/Makefile                  |  11 +
 board/kosagi/novena/novena.c                  | 340 +++++++++++++++
 board/kosagi/novena/novena_spl.c              | 584
++++++++++++++++++++++++++
 board/kosagi/novena/setup.cfg                 |  47 +++
 board/tqc/tqma6/tqma6.c                       |  10 +-
 board/tqc/tqma6/tqma6_bb.h                    |   2 +-
 configs/novena_defconfig                      |   4 +
 drivers/mtd/nand/mxs_nand.c                   |   9 +-
 include/configs/aristainetos.h                |   2 +-
 include/configs/imx6_spl.h                    |   2 +-
 include/configs/m28evk.h                      |   1 +
 include/configs/mx6_common.h                  |   1 +
 include/configs/mx6qsabreauto.h               |   3 +
 include/configs/mx6slevk.h                    |   6 +-
 include/configs/novena.h                      | 298 +++++++++++++
 include/configs/tqma6.h                       |  19 +-
 include/configs/wandboard.h                   |   9 +
 tools/imximage.c                              |   2 +-
 35 files changed, 1829 insertions(+), 40 deletions(-)
 create mode 100644 board/kosagi/novena/Kconfig
 create mode 100644 board/kosagi/novena/MAINTAINERS
 create mode 100644 board/kosagi/novena/Makefile
 create mode 100644 board/kosagi/novena/novena.c
 create mode 100644 board/kosagi/novena/novena_spl.c
 create mode 100644 board/kosagi/novena/setup.cfg
 create mode 100644 configs/novena_defconfig
 create mode 100644 include/configs/novena.h

Regards,
Stefano

Comments

Tom Rini Nov. 5, 2014, 8:04 p.m. UTC | #1
On Wed, Nov 05, 2014 at 06:01:04PM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 3f97af5302ee15530411232b464d255eb2ff2ffb:
> 
>   ot1200: add sata support (2014-10-23 10:04:26 +0200)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 0b23780ff02bdbec46fac1fe4151e2ebf1eae881:
> 
>   arm: mx6: cm_fx6: detect 1GB DRAM correctly on solo (2014-11-05
> 17:18:01 +0100)
> 

Applied to u-boot/master, thanks!