Message ID | 4EC39FD9.3070807@de.bosch.com |
---|---|
State | Changes Requested |
Delegated to: | Stefano Babic |
Headers | show |
On Wed, Nov 16, 2011 at 7:34 PM, Dirk Behme <dirk.behme@de.bosch.com> wrote: > On 12.11.2011 11:36, Jason Liu wrote: >> >> Add the initial support for Freescale i.MX6Q Armadillo2 board >> Support: MMC boot from slot 0/1, debug UART(UART4), usdhc. > > ... >> >> diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h >> new file mode 100644 >> index 0000000..a4c7b31 >> --- /dev/null >> +++ b/include/configs/mx6qarm2.h > > ... >> >> +#define CONFIG_EXTRA_ENV_SETTINGS \ >> + "script=boot.scr\0" \ >> + "uimage=uImage\0" \ >> + "mmcdev=0\0" \ >> + "mmcpart=2\0" \ >> + "mmcroot=/dev/mmcblk0p3 rw\0" \ >> + "mmcrootfstype=ext3 rootwait\0" \ >> + "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \ >> + "root=${mmcroot} " \ >> + "rootfstype=${mmcrootfstype}\0" \ >> + "loadbootscript=" \ >> + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} >> ${script};\0" \ >> + "bootscript=echo Running bootscript from mmc ...; " \ >> + "source\0" \ >> + "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} >> ${uimage}\0" \ >> + "mmcboot=echo Booting from mmc ...; " \ >> + "run mmcargs; " \ >> + "bootm\0" \ >> + "netargs=setenv bootargs console=ttymxc0,${baudrate} " \ >> + "root=/dev/nfs " \ >> + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ >> + "netboot=echo Booting from net ...; " \ >> + "run netargs; " \ >> + "dhcp ${uimage}; bootm\0" \ >> + >> +#define CONFIG_BOOTCOMMAND \ >> + "if mmc rescan ${mmcdev}; then " \ >> + "if run loadbootscript; then " \ >> + "run bootscript; " \ >> + "else " \ >> + "if run loaduimage; then " \ >> + "run mmcboot; " \ >> + "else run netboot; " \ >> + "fi; " \ >> + "fi; " \ >> + "else run netboot; fi" > > Testing this with the latest mainline kernel and a Linaro developer rootfs > I'd like to propose the following changes to these settings [1]: > > * Introduce a ${console} variable to centralize the console configuration > * The recent mainline kernel uses ttymxc3 instead of ttymxc0 for the > console. I.e. switch from ttymxc0 to ttymxc3 > * Add a 'mmc dev ${mmcdev}' command to be able to switch between the SD > slots > * Use the SD card slot at the CPU board by default. Instead the one on the > expansion base board. I.e. switch from mmcdev=0 to mmcdev=1 > * The Linaro rootfs uses EXT4. For this, remove the hard coded > rootfstype=ext3 and let the kernel auto detect the rootfs type. > > Best regards > > Dirk > > [1] > > --- > include/configs/mx6qarm2.h | 14 +++++++------- > 1 file changed, 7 insertions(+), 7 deletions(-) > > Index: a/include/configs/mx6qarm2.h > =================================================================== > --- a/include/configs/mx6qarm2.h > +++ b/include/configs/mx6qarm2.h > @@ -78,13 +78,12 @@ > #define CONFIG_EXTRA_ENV_SETTINGS \ > "script=boot.scr\0" \ > "uimage=uImage\0" \ > - "mmcdev=0\0" \ > + "mmcdev=1\0" \ > + "console=ttymxc3\0" \ > "mmcpart=2\0" \ > - "mmcroot=/dev/mmcblk0p3 rw\0" \ > - "mmcrootfstype=ext3 rootwait\0" \ > - "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \ > - "root=${mmcroot} " \ > - "rootfstype=${mmcrootfstype}\0" \ > + "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ > + "mmcargs=setenv bootargs console=${console},${baudrate} " \ > + "root=${mmcroot}\0" \ > "loadbootscript=" \ > "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ > "bootscript=echo Running bootscript from mmc ...; " \ > @@ -93,7 +92,7 @@ > "mmcboot=echo Booting from mmc ...; " \ > "run mmcargs; " \ > "bootm\0" \ > - "netargs=setenv bootargs console=ttymxc0,${baudrate} " \ > + "netargs=setenv bootargs console=${console},${baudrate} " \ > "root=/dev/nfs " \ > "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ > "netboot=echo Booting from net ...; " \ > @@ -101,6 +100,7 @@ > "dhcp ${uimage}; bootm\0" \ > > #define CONFIG_BOOTCOMMAND \ > + "mmc dev ${mmcdev};" \ > "if mmc rescan ${mmcdev}; then " \ > "if run loadbootscript; then " \ > "run bootscript; " \ > Thanks for the testing and the suggestion for config file change. I will pull it in the v2 version and put a test-by you into the commit log. Jason Liu
Index: a/include/configs/mx6qarm2.h =================================================================== --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -78,13 +78,12 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "uimage=uImage\0" \ - "mmcdev=0\0" \ + "mmcdev=1\0" \ + "console=ttymxc3\0" \ "mmcpart=2\0" \ - "mmcroot=/dev/mmcblk0p3 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ - "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ + "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ "loadbootscript=" \ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ @@ -93,7 +92,7 @@ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "bootm\0" \ - "netargs=setenv bootargs console=ttymxc0,${baudrate} " \ + "netargs=setenv bootargs console=${console},${baudrate} " \ "root=/dev/nfs " \ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ "netboot=echo Booting from net ...; " \ @@ -101,6 +100,7 @@ "dhcp ${uimage}; bootm\0" \ #define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev};" \ "if mmc rescan ${mmcdev}; then " \ "if run loadbootscript; then " \ "run bootscript; " \