new file mode 100644
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Common sunxi environment
+ *
+ * Copyright 2024 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ /
+
+/****************************************************************************
+ * environment variables holding default load addresses *
+ ****************************************************************************/
+/*
+ * We cannot use expressions here, because expressions won't be evaluated in
+ * autoconf.mk.
+ */
+#ifdef CONFIG_ARM64
+/*
+ * Boards seem to come with at least 512MB of DRAM.
+ * The kernel should go at 512K, which is the default text offset (that will
+ * be adjusted at runtime if needed).
+ * There is no compression for arm64 kernels (yet), so leave some space
+ * for really big kernels, say 256MB for now.
+ * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
+ */
+#define BOOTM_SIZE 0xa000000
+#define KERNEL_ADDR_R SDRAM_OFFSET(0080000)
+#define KERNEL_COMP_ADDR_R SDRAM_OFFSET(4000000)
+#define KERNEL_COMP_SIZE 0xb000000
+#define FDT_ADDR_R SDRAM_OFFSET(FA00000)
+#define SCRIPT_ADDR_R SDRAM_OFFSET(FC00000)
+#define PXEFILE_ADDR_R SDRAM_OFFSET(FD00000)
+#define FDTOVERLAY_ADDR_R SDRAM_OFFSET(FE00000)
+#define RAMDISK_ADDR_R SDRAM_OFFSET(FF00000)
+
+#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 256)
+/*
+ * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
+ * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
+ * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
+ */
+#define BOOTM_SIZE 0xa000000
+#define KERNEL_ADDR_R SDRAM_OFFSET(2000000)
+#define FDT_ADDR_R SDRAM_OFFSET(3000000)
+#define SCRIPT_ADDR_R SDRAM_OFFSET(3100000)
+#define PXEFILE_ADDR_R SDRAM_OFFSET(3200000)
+#define FDTOVERLAY_ADDR_R SDRAM_OFFSET(3300000)
+#define RAMDISK_ADDR_R SDRAM_OFFSET(3400000)
+
+#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 64)
+/*
+ * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
+ * 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
+ * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
+ */
+#define BOOTM_SIZE 0x2e00000
+#define KERNEL_ADDR_R SDRAM_OFFSET(1000000)
+#define FDT_ADDR_R SDRAM_OFFSET(1800000)
+#define SCRIPT_ADDR_R SDRAM_OFFSET(1900000)
+#define PXEFILE_ADDR_R SDRAM_OFFSET(1A00000)
+#define FDTOVERLAY_ADDR_R SDRAM_OFFSET(1B00000)
+#define RAMDISK_ADDR_R SDRAM_OFFSET(1C00000)
+
+#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 32)
+/*
+ * 32M RAM minus 2.5MB for u-boot, heap, stack, etc.
+ * 16M uncompressed kernel, 7M compressed kernel, 128K fdt, 64K script,
+ * 128K DT overlay, 128K PXE and the ramdisk in the rest (max. 5MB)
+ */
+#define BOOTM_SIZE 0x1700000
+#define KERNEL_ADDR_R SDRAM_OFFSET(1000000)
+#define FDT_ADDR_R SDRAM_OFFSET(1d50000)
+#define SCRIPT_ADDR_R SDRAM_OFFSET(1d40000)
+#define PXEFILE_ADDR_R SDRAM_OFFSET(1d00000)
+#define FDTOVERLAY_ADDR_R SDRAM_OFFSET(1d20000)
+#define RAMDISK_ADDR_R SDRAM_OFFSET(1800000)
+
+#else
+#error Need at least 32MB of DRAM. Please adjust load addresses.
+#endif
+
+stdin=serial
+#ifdef CONFIG_USB_KEYBOARD
+stdin+=,usbkbd
+#endif
+
+stdout=serial
+stderr=serial
+#ifdef CONFIG_VIDEO
+stdout+=,vidconsole
+stderr+=,vidconsole
+#endif
+
+bootm_size=BOOTM_SIZE
+kernel_addr_r=KERNEL_ADDR_R
+fdt_addr_r=FDT_ADDR_R
+scriptaddr=SCRIPT_ADDR_R
+pxefile_addr_r=PXEFILE_ADDR_R
+fdtoverlay_addr_r=FDTOVERLAY_ADDR_R
+ramdisk_addr_r=RAMDISK_ADDR_R
+
+#ifdef CONFIG_ARM64
+kernel_comp_addr_r=KERNEL_COMP_ADDR_R
+kernel_comp_size=KERNEL_COMP_SIZE
+#endif
+
+dfu_alt_info_ram=
+ kernel ram KERNEL_ADDR_R 0x1000000;
+ fdt ram FDT_ADDR_R 0x100000;
+ ramdisk ram RAMDISK_ADDR_R 0x4000000
+
+fdtfile=DEFAULT_DEVICE_TREE.dtb
+
+console=ttyS0,115200
+
+uuid_gpt_esp=c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+#ifdef CONFIG_ARM64
+uuid_gpt_system=b921b045-1df0-41c3-af44-4c6f280d3fae
+#else
+uuid_gpt_system=69dad710-2ce4-4e3c-b16c-21a1d49abed3
+#endif
+
+partitions=
+ name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};
+ name=loader2,size=984k,uuid=${uuid_gpt_loader2};
+ name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};
+ name=system,size=-,uuid=${uuid_gpt_system};
+
+/* support booting a very old kernel */
+#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
+bootcmd_sunxi_compat=
+ setenv root /dev/mmcblk0p3 rootwait;
+ if ext2load mmc 0 44000000 uEnv.txt; then
+ echo Loaded environment from uEnv.txt;
+ env import -t 44000000 ${filesize};
+ fi;
+ setenv bootargs console=${console} root=${root} ${extraargs};
+ ext2load mmc 0 43000000 script.bin &&
+ ext2load mmc 0 48000000 uImage &&
+ bootm 48000000
+#endif
@@ -61,169 +61,4 @@
#define PHYS_SDRAM_0 CFG_SYS_SDRAM_BASE
#define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */
-/****************************************************************************
- * environment variables holding default load addresses *
- ****************************************************************************/
-/*
- * We cannot use expressions here, because expressions won't be evaluated in
- * autoconf.mk.
- */
-#ifdef CONFIG_ARM64
-/*
- * Boards seem to come with at least 512MB of DRAM.
- * The kernel should go at 512K, which is the default text offset (that will
- * be adjusted at runtime if needed).
- * There is no compression for arm64 kernels (yet), so leave some space
- * for really big kernels, say 256MB for now.
- * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
- */
-#define BOOTM_SIZE __stringify(0xa000000)
-#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000))
-#define KERNEL_COMP_ADDR_R __stringify(SDRAM_OFFSET(4000000))
-#define KERNEL_COMP_SIZE __stringify(0xb000000)
-#define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000))
-#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000))
-#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000))
-#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(FE00000))
-#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FF00000))
-
-#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 256)
-/*
- * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
- * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
- * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
- */
-#define BOOTM_SIZE __stringify(0xa000000)
-#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000))
-#define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000))
-#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000))
-#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
-#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(3300000))
-#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3400000))
-
-#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 64)
-/*
- * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
- * 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
- * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
- */
-#define BOOTM_SIZE __stringify(0x2e00000)
-#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000))
-#define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000))
-#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000))
-#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000))
-#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
-#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1C00000))
-
-#elif (CONFIG_SUNXI_MINIMUM_DRAM_MB >= 32)
-/*
- * 32M RAM minus 2.5MB for u-boot, heap, stack, etc.
- * 16M uncompressed kernel, 7M compressed kernel, 128K fdt, 64K script,
- * 128K DT overlay, 128K PXE and the ramdisk in the rest (max. 5MB)
- */
-#define BOOTM_SIZE __stringify(0x1700000)
-#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000))
-#define FDT_ADDR_R __stringify(SDRAM_OFFSET(1d50000))
-#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1d40000))
-#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1d00000))
-#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(1d20000))
-#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1800000))
-
-#else
-#error Need at least 32MB of DRAM. Please adjust load addresses.
-#endif
-
-#define MEM_LAYOUT_ENV_SETTINGS \
- "bootm_size=" BOOTM_SIZE "\0" \
- "kernel_addr_r=" KERNEL_ADDR_R "\0" \
- "fdt_addr_r=" FDT_ADDR_R "\0" \
- "scriptaddr=" SCRIPT_ADDR_R "\0" \
- "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
- "fdtoverlay_addr_r=" FDTOVERLAY_ADDR_R "\0" \
- "ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
-
-#ifdef CONFIG_ARM64
-#define MEM_LAYOUT_ENV_EXTRA_SETTINGS \
- "kernel_comp_addr_r=" KERNEL_COMP_ADDR_R "\0" \
- "kernel_comp_size=" KERNEL_COMP_SIZE "\0"
-#else
-#define MEM_LAYOUT_ENV_EXTRA_SETTINGS ""
-#endif
-
-#define DFU_ALT_INFO_RAM \
- "dfu_alt_info_ram=" \
- "kernel ram " KERNEL_ADDR_R " 0x1000000;" \
- "fdt ram " FDT_ADDR_R " 0x100000;" \
- "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"
-
-#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
-#define BOOTCMD_SUNXI_COMPAT \
- "bootcmd_sunxi_compat=" \
- "setenv root /dev/mmcblk0p3 rootwait; " \
- "if ext2load mmc 0 0x44000000 uEnv.txt; then " \
- "echo Loaded environment from uEnv.txt; " \
- "env import -t 0x44000000 ${filesize}; " \
- "fi; " \
- "setenv bootargs console=${console} root=${root} ${extraargs}; " \
- "ext2load mmc 0 0x43000000 script.bin && " \
- "ext2load mmc 0 0x48000000 uImage && " \
- "bootm 0x48000000\0"
-#else
-#define BOOTCMD_SUNXI_COMPAT
-#endif
-
-#ifdef CONFIG_USB_KEYBOARD
-#define CONSOLE_STDIN_SETTINGS \
- "stdin=serial,usbkbd\0"
-#else
-#define CONSOLE_STDIN_SETTINGS \
- "stdin=serial\0"
-#endif
-
-#ifdef CONFIG_VIDEO
-#define CONSOLE_STDOUT_SETTINGS \
- "stdout=serial,vidconsole\0" \
- "stderr=serial,vidconsole\0"
-#else
-#define CONSOLE_STDOUT_SETTINGS \
- "stdout=serial\0" \
- "stderr=serial\0"
-#endif
-
-#define PARTS_DEFAULT \
- "name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \
- "name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \
- "name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \
- "name=system,size=-,uuid=${uuid_gpt_system};"
-
-#define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b"
-
-#ifdef CONFIG_ARM64
-#define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae"
-#else
-#define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3"
-#endif
-
-#define CONSOLE_ENV_SETTINGS \
- CONSOLE_STDIN_SETTINGS \
- CONSOLE_STDOUT_SETTINGS
-
-#ifdef CONFIG_ARM64
-#define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb"
-#else
-#define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb"
-#endif
-
-#define CFG_EXTRA_ENV_SETTINGS \
- CONSOLE_ENV_SETTINGS \
- MEM_LAYOUT_ENV_SETTINGS \
- MEM_LAYOUT_ENV_EXTRA_SETTINGS \
- DFU_ALT_INFO_RAM \
- "fdtfile=" FDTFILE "\0" \
- "console=ttyS0,115200\0" \
- "uuid_gpt_esp=" UUID_GPT_ESP "\0" \
- "uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \
- "partitions=" PARTS_DEFAULT "\0" \
- BOOTCMD_SUNXI_COMPAT
-
#endif /* _SUNXI_COMMON_CONFIG_H */
Convert these boards to use a text environment. For the boards check, the only differences are extra spaces after the semicolons in 'dfu_alt_info_ram' and 'partitions', both of which are permitted. Add in the special boot command for old kernels, dropping the unnecessary and confusing hex prefixes. Signed-off-by: Simon Glass <sjg@chromium.org> --- Changes in v4: - Drop UUID_GPT_SYSTEM and UUID_GPT_ESP definitions - Drop special case for ARM64's devicetree subdir - Drop unwanted quotations and indentation in KERNEL_COMPAT path Changes in v2: - Keep bootcmd_sunxi_compat if OLD_SUNXI_KERNEL_COMPAT is enabled board/sunxi/sunxi.env | 140 ++++++++++++++++++++++++++++ include/configs/sunxi-common.h | 165 --------------------------------- 2 files changed, 140 insertions(+), 165 deletions(-) create mode 100644 board/sunxi/sunxi.env